Search Results

Search found 2565 results on 103 pages for 'sys'.

Page 49/103 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • L2TP iptables port forward

    - by The_cobra666
    Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

    Read the article

  • FreeBSD 8 Kernel Configuration Error Using the VESA Option

    - by gvkv
    I'm trying to reconfigure FreeBSD 8 (amd64) to allow for a high resolution terminal by following these instructions. The problem is that when I add the two lines: options VESA options SC_PIXEL_MODE and try to build: make buildkernel KERNCONF=VESAKERN I get the following error: /usr/src/sys/amd64/conf/VESAKERN: unknown option "VESA" and I have no idea why.

    Read the article

  • Getting error while install mod_wsgi on centos6.3 with python 2.7

    - by user825904
    In initially installed yum install mod_wsgi and i think it was linked with python 2.6 Now is there any way to link it with 2.7 I tried configuring from the source and i get this error apxs -c -I/usr/local/include/python2.7 -DNDEBUG mod_wsgi.c -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/lib64/apr-1/build/libtool --silent --mode=compile gcc -prefer-pic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wformat-security -fno-strict-aliasing -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -pthread -I/usr/include/httpd -I/usr/include/apr-1 -I/usr/include/apr-1 -I/usr/local/include/python2.7 -DNDEBUG -c -o mod_wsgi.lo mod_wsgi.c && touch mod_wsgi.slo In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1161:1: warning: "_POSIX_C_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:162:1: warning: this is the location of the previous definition In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1183:1: warning: "_XOPEN_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:164:1: warning: this is the location of the previous definition mod_wsgi.c: In function ‘wsgi_server_group’: mod_wsgi.c:991: warning: unused variable ‘value’ mod_wsgi.c: In function ‘Log_isatty’: mod_wsgi.c:1665: warning: unused variable ‘result’ mod_wsgi.c: In function ‘Log_writelines’: mod_wsgi.c:1802: warning: unused variable ‘msg’ mod_wsgi.c: In function ‘Adapter_output’: mod_wsgi.c:3087: warning: unused variable ‘n’ mod_wsgi.c: In function ‘Adapter_file_wrapper’: mod_wsgi.c:4138: warning: unused variable ‘result’ mod_wsgi.c: In function ‘wsgi_python_term’: mod_wsgi.c:5850: warning: unused variable ‘tstate’ mod_wsgi.c:5849: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_python_child_init’: mod_wsgi.c:7050: warning: unused variable ‘l’ mod_wsgi.c:6948: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_add_import_script’: mod_wsgi.c:7701: warning: unused variable ‘error’ mod_wsgi.c: In function ‘wsgi_add_handler_script’: mod_wsgi.c:8179: warning: unused variable ‘dconfig’ mod_wsgi.c:8178: warning: unused variable ‘sconfig’ mod_wsgi.c: In function ‘wsgi_hook_handler’: mod_wsgi.c:9375: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9377: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9379: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9383: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9403: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9405: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9408: warning: suggest parentheses around assignment used as truth value mod_wsgi.c: In function ‘wsgi_daemon_worker’: mod_wsgi.c:10819: warning: unused variable ‘duration’ mod_wsgi.c:10818: warning: unused variable ‘start’ mod_wsgi.c: In function ‘wsgi_hook_daemon_handler’: mod_wsgi.c:13172: warning: unused variable ‘i’ mod_wsgi.c:13170: warning: unused variable ‘elts’ mod_wsgi.c:13169: warning: unused variable ‘head’ mod_wsgi.c: At top level: mod_wsgi.c:8142: warning: ‘wsgi_set_user_authoritative’ defined but not used mod_wsgi.c:15251: warning: ‘wsgi_hook_check_user_id’ defined but not used /usr/lib64/apr-1/build/libtool --silent --mode=link gcc -o mod_wsgi.la -rpath /usr/lib64/httpd/modules -module -avoid-version mod_wsgi.lo -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/bin/ld: /usr/local/lib/libpython2.7.a(abstract.o): relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a shared object; recompile with -fPIC /usr/local/lib/libpython2.7.a: could not read symbols: Bad value collect2: ld returned 1 exit status apxs:Error: Command failed with rc=65536 . make: *** [mod_wsgi.la] Error 1 Waiting for Graham

    Read the article

  • ipmi driver on windows 2003 R2

    - by rgmarcha
    ipmiutil complains it doesn't find ipmidrv.sys I see it's on \windows\system32\drivers directory, also on \windows\system32\ipmi directory. But, the driver doesn't appear on the output of driverquery command. Any hint on how to enable it? The hardware is a Dell 1950

    Read the article

  • ext3 slowing down on writes on linux 2.6.18

    - by user29475
    i'm running into a problem where writing to a file will cause a 5 to 15 second pause, this occurs only on writes. So far i have remounted the filesystem with data=writeback as an option, and set /sys/block/sdb/queue/max_sectors_kb to 64 to shorten the queue. Are there any other things i can try to solve this ?

    Read the article

  • Oracle9i export error

    - by Max
    When I rut the following: set ORACLE_SID=orcl exp.exe 'SYS/system as sysdba' full=y log=exp.log file=mydump.dmp in the end i see the following: EXP-00056: ORACLE error 942 encountered ORA-00942: table or view does not exist EXP-00000: Export terminated unsuccessfully what should i do to resolve it? I had 9.2.0.1.0 oracle, after it was installed 2 patches: 9.2.0.7.0 and 9.2.0.8.0

    Read the article

  • Windows 7 x64 blue screen of death

    - by emmettnicholas
    I've been running Windows 7 Ultimate x64 on my HP EliteBook 8530w for a few months now, and during that time, it has blue-screen-of-deathed 3 times. This time, I was able to snap a pic with my cellphone before it automatically rebooted: Any idea what might be causing this? Thanks! EDIT: I ran BlueScreenView, which showed 6 crahes: Bug Check String Caused By Driver ---------------- ---------------- IRQL_NOT_LESS_OR_EQUAL hal.dll DRIVER_POWER_STATE_FAILURE ntsokrnl.exe DRIVER_POWER_STATE_FAILURE ntsokrnl.exe BAD_POOL_CALLER NETw5s64.sys SYSTEM_SERVICE_EXCEPTION ntsokrnl.exe DRIVER_POWER_STATE_FAILURE ntsokrnl.exe

    Read the article

  • Why load increase ,ssd iops increase but cpu iowait decrease?

    - by mq44944
    There is a strange thing on my server which has a mysql running on it. The QPS is more than 4000 but TPS is less than 20. The server load is more than 80 and cpu usr is more than 86% but iowait is less than 8%. The disk iops is more than 16000 and util of disk is more than 99%. When the QPS decreases, the load decreases, the cpu iowait increases. I can't catch this! root@mypc # dmidecode | grep "Product Name" Product Name: PowerEdge R510 Product Name: 084YMW root@mypc # megacli -PDList -aALL |grep "Inquiry Data" Inquiry Data: SEAGATE ST3600057SS ES656SL316PT Inquiry Data: SEAGATE ST3600057SS ES656SL30THV Inquiry Data: ATA INTEL SSDSA2CW300362CVPR201602A6300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR2044037K300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402PX300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204403WN300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202000HU300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR202001E7300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204402WE300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204404E5300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR204401QF300EGN Inquiry Data: ATA INTEL SSDSA2CW300362CVPR20450001300EGN the mysql data files lie on the ssd disks which are organizaed using RAID 10. root@mypc # megacli -LDInfo -L1 -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 1 (Target Id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:1427840MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:5 Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Exit Code: 0x00 -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:29|79.80 64.49 42.00| 82 7 6 5| 0 0|16421.1 10.6262705.9 85.2 8.3 0.5 0.1 99.5| 0 0 0 3968 0| 495482 96.58| 09:05:30|79.80 64.49 42.00| 79 7 8 6| 0 0|15907.4 230.6254409.7 6357.5 8.4 0.5 0.1 98.5| 0 0 0 4195 0| 496434 96.68| 09:05:31|81.34 65.07 42.31| 81 7 7 5| 0 0|16198.7 8.6259029.2 99.8 8.1 0.5 0.1 99.3| 0 0 0 4220 0| 508983 96.70| 09:05:32|81.34 65.07 42.31| 82 7 5 5| 0 0|16746.6 8.7267853.3 92.4 8.5 0.5 0.1 99.4| 0 0 0 4084 0| 503834 96.54| 09:05:33|81.34 65.07 42.31| 81 7 6 5| 0 0|16498.7 9.6263856.8 92.3 8.0 0.5 0.1 99.3| 0 0 0 4030 0| 507051 96.60| 09:05:34|81.34 65.07 42.31| 80 8 7 6| 0 0|16328.4 11.5261101.6 95.8 8.1 0.5 0.1 98.3| 0 0 0 4119 0| 504409 96.63| 09:05:35|81.31 65.33 42.52| 82 7 6 5| 0 0|16374.0 8.7261921.9 92.5 8.1 0.5 0.1 99.7| 0 0 0 4127 0| 507279 96.66| 09:05:36|81.31 65.33 42.52| 81 8 6 5| 0 0|16496.2 8.6263832.0 84.5 8.5 0.5 0.1 99.2| 0 0 0 4100 0| 505054 96.59| 09:05:37|81.31 65.33 42.52| 82 8 6 4| 0 0|16239.4 9.6259768.8 84.3 8.0 0.5 0.1 99.1| 0 0 0 4273 0| 510621 96.72| 09:05:38|81.31 65.33 42.52| 81 7 6 5| 0 0|16349.6 8.7261439.2 81.4 8.2 0.5 0.1 98.9| 0 0 0 4171 0| 510145 96.67| 09:05:39|81.31 65.33 42.52| 82 7 6 5| 0 0|16116.8 8.7257667.6 96.5 8.0 0.5 0.1 99.1| 0 0 0 4348 0| 513093 96.74| 09:05:40|79.60 65.24 42.61| 79 7 7 7| 0 0|16154.2 242.9258390.4 6388.4 8.5 0.5 0.1 99.0| 0 0 0 4033 0| 507244 96.70| 09:05:41|79.60 65.24 42.61| 79 7 8 6| 0 0|16583.1 21.2265129.6 173.5 8.2 0.5 0.1 99.1| 0 0 0 3995 0| 501474 96.57| 09:05:42|79.60 65.24 42.61| 81 8 6 5| 0 0|16281.0 9.7260372.2 69.5 8.3 0.5 0.1 98.7| 0 0 0 4221 0| 509322 96.70| 09:05:43|79.60 65.24 42.61| 80 7 7 6| 0 0|16355.3 8.7261515.5 104.3 8.2 0.5 0.1 99.6| 0 0 0 4087 0| 502052 96.62| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:05:44|79.60 65.24 42.61| 83 7 5 4| 0 0|16469.4 11.6263387.0 138.8 8.2 0.5 0.1 98.7| 0 0 0 4292 0| 509979 96.65| 09:05:45|79.07 65.37 42.77| 80 7 6 6| 0 0|16659.5 9.7266478.7 85.0 8.4 0.5 0.1 98.5| 0 0 0 3899 0| 496234 96.54| 09:05:46|79.07 65.37 42.77| 78 7 7 8| 0 0|16752.9 8.7267921.8 97.1 8.4 0.5 0.1 98.9| 0 0 0 4126 0| 508300 96.57| 09:05:47|79.07 65.37 42.77| 82 7 6 5| 0 0|16657.2 9.6266439.3 84.3 8.3 0.5 0.1 98.9| 0 0 0 4086 0| 502171 96.57| 09:05:48|79.07 65.37 42.77| 79 8 6 6| 0 0|16814.5 8.7268924.1 77.6 8.5 0.5 0.1 99.0| 0 0 0 4059 0| 499645 96.52| 09:05:49|79.07 65.37 42.77| 81 7 6 5| 0 0|16553.0 6.8264708.6 42.5 8.3 0.5 0.1 99.4| 0 0 0 4249 0| 501623 96.60| 09:05:50|79.63 65.71 43.01| 79 7 7 7| 0 0|16295.1 246.9260475.0 6442.4 8.7 0.5 0.1 99.1| 0 0 0 4231 0| 511032 96.70| 09:05:51|79.63 65.71 43.01| 80 7 6 6| 0 0|16568.9 8.7264919.7 104.7 8.3 0.5 0.1 99.7| 0 0 0 4272 0| 517177 96.68| 09:05:53|79.63 65.71 43.01| 79 7 7 6| 0 0|16539.0 8.6264502.9 87.6 8.4 0.5 0.1 98.9| 0 0 0 3992 0| 496728 96.52| 09:05:54|79.63 65.71 43.01| 79 7 7 7| 0 0|16527.5 11.6264363.6 92.6 8.5 0.5 0.1 98.8| 0 0 0 4045 0| 502944 96.59| 09:05:55|79.63 65.71 43.01| 80 7 7 6| 0 0|16374.7 12.5261687.2 134.9 8.6 0.5 0.1 99.2| 0 0 0 4143 0| 507006 96.66| 09:05:56|76.05 65.20 42.96| 77 8 8 8| 0 0|16464.9 9.6263314.3 111.9 8.5 0.5 0.1 98.9| 0 0 0 4250 0| 505417 96.64| 09:05:57|76.05 65.20 42.96| 79 7 6 7| 0 0|16460.1 8.8263283.2 93.4 8.3 0.5 0.1 98.8| 0 0 0 4294 0| 508168 96.66| 09:05:58|76.05 65.20 42.96| 80 7 7 7| 0 0|16176.5 9.6258762.1 127.3 8.3 0.5 0.1 98.9| 0 0 0 4160 0| 509349 96.72| 09:05:59|76.05 65.20 42.96| 75 7 9 10| 0 0|16522.0 10.7264274.6 93.1 8.6 0.5 0.1 97.5| 0 0 0 4034 0| 492623 96.51| -------- -----load-avg---- ---cpu-usage--- ---swap--- -------------------------io-usage----------------------- -QPS- -TPS- -Hit%- time | 1m 5m 15m |usr sys idl iow| si so| r/s w/s rkB/s wkB/s queue await svctm %util| ins upd del sel iud| lor hit| 09:06:00|76.05 65.20 42.96| 79 7 7 7| 0 0|16369.6 21.2261867.3 262.5 8.4 0.5 0.1 98.9| 0 0 0 4305 0| 494509 96.59| 09:06:01|75.33 65.23 43.09| 73 6 9 12| 0 0|15864.0 209.3253685.4 6238.0 10.0 0.6 0.1 98.7| 0 0 0 3913 0| 483480 96.62| 09:06:02|75.33 65.23 43.09| 73 7 8 12| 0 0|15854.7 12.7253613.2 93.6 11.0 0.7 0.1 99.0| 0 0 0 4271 0| 483771 96.64| 09:06:03|75.33 65.23 43.09| 75 7 9 9| 0 0|16074.8 8.7257104.3 81.7 8.1 0.5 0.1 98.5| 0 0 0 4060 0| 480701 96.55| 09:06:04|75.33 65.23 43.09| 76 7 8 9| 0 0|16221.7 9.7259500.1 139.4 8.1 0.5 0.1 97.6| 0 0 0 3953 0| 486774 96.56| 09:06:05|74.98 65.33 43.24| 78 7 8 8| 0 0|16330.7 8.7261166.5 85.3 8.2 0.5 0.1 98.5| 0 0 0 3957 0| 481775 96.53| 09:06:06|74.98 65.33 43.24| 75 7 9 9| 0 0|16093.7 11.7257436.1 93.7 8.2 0.5 0.1 99.2| 0 0 0 3938 0| 489251 96.60| 09:06:07|74.98 65.33 43.24| 75 7 5 13| 0 0|15758.9 19.2251989.4 188.2 14.7 0.9 0.1 99.7| 0 0 0 4140 0| 494738 96.70| 09:06:08|74.98 65.33 43.24| 69 7 10 15| 0 0|16166.3 8.7258474.9 81.2 8.9 0.5 0.1 98.7| 0 0 0 3993 0| 487162 96.58| 09:06:09|74.98 65.33 43.24| 74 7 9 10| 0 0|16071.0 8.7257010.9 93.3 8.2 0.5 0.1 99.2| 0 0 0 4098 0| 491557 96.61| 09:06:10|70.98 64.66 43.14| 71 7 9 12| 0 0|15549.6 216.1248701.1 6188.7 8.3 0.5 0.1 97.8| 0 0 0 3879 0| 480832 96.66| 09:06:11|70.98 64.66 43.14| 71 7 10 13| 0 0|16233.7 22.4259568.1 257.1 8.2 0.5 0.1 99.2| 0 0 0 4088 0| 493200 96.62| 09:06:12|70.98 64.66 43.14| 78 7 8 7| 0 0|15932.4 10.6254779.5 108.1 8.1 0.5 0.1 98.6| 0 0 0 4168 0| 489838 96.63| 09:06:13|70.98 64.66 43.14| 71 8 9 12| 0 0|16255.9 11.5259902.3 103.9 8.3 0.5 0.1 98.0| 0 0 0 3874 0| 481246 96.52| 09:06:14|70.98 64.66 43.14| 60 6 16 18| 0 0|15621.0 9.7249826.1 81.9 8.0 0.5 0.1 99.3| 0 0 0 3956 0| 480278 96.65|

    Read the article

  • Trac problem: AttributeError: Cannot find an implementation of the "IRequestHandler" interface named "WikiModule"

    - by Janosch
    This problem already has been described mutliple times in different mailing lists, but no solution has yet been published. My original setup is as follows (but in the mean time i have a simpler one on Windows 7): Ubuntu server with apache 2.2 and python 2.7 virutal python environment created with virtualenv installed babel, genshi and trac in this order using pip in the virtual environment Trac seems to run fine with tracd, but when visiting it through apache, i get the following error in an official trac error page: AttributeError: Cannot find an implementation of the "IRequestHandler" interface named "WikiModule" The stacktrace looks like this: Traceback (most recent call last): File "/srv/trac/python-environment/lib/python2.5/site-packages/Trac-0.13dev_r10668-py2.5.egg/trac/web/main.py",line 473, in _dispatch_request dispatcher.dispatch(req) File "/srv/trac/python-environment/lib/python2.5/site-packages/Trac-0.13dev_r10668-py2.5.egg/trac/web/main.py", line 154, in dispatch chosen_handler = self.default_handler File "/srv/trac/python-environment/lib/python2.5/site-packages/Trac-0.13dev_r10668-py2.5.egg/trac/config.py", line 691, in __get__ self.section, self.name)) AttributeError: Cannot find an implementation of the "IRequestHandler" interface named "WikiModule". Please update the option trac.default_handler in trac.ini. I already tried a lot to get down to the root of the problem, for me it looks as if all nativ trac components refuse to load. When one explicitely imports these components in the wsgi handler, some of them start to work somehow. Since i suspected the virtual environment, i dropped it, and manually copied all dependencies (babel, genshi, trac, ..) to one directory, and added this directory to system.path in the wsgi handler. I get exactly the same error. Since this setup is now independend from the environment, one can easily try it out on any other machine (windows or linux) running apache 2 and python 2.7. On my Windwos 7 machine, i got exactly the same problem. I zipped together the whole bundle, one can download it from http://www.xterity.de/tmp/trac-installation.zip . In the apache configuration (Windows 7 machine) i use the following settings: Alias /trac/chrome/common "D:/workspace/trac-installation/trac-resources/common" Alias /trac/chrome/site "D:/workspace/trac-installation/trac-resources/site" WSGIScriptAlias /trac "D:/workspace/trac-installation/apache/handler.wsgi" <Directory "D:/workspace/trac-installation/trac-resources"> Order allow,deny Allow from all </Directory> <Directory "D:/workspace/trac-installation"> Order allow,deny Allow from all </Directory> <Location "/trac"> Order allow,deny Allow from all </Location> And my handler.wsgi looks like this: import os import sys sys.path.append('D:/workspace/trac-installation/dependencies/') os.environ['TRAC_ENV'] = 'D:/workspace/trac-installation/trac-environments/Esp004' os.environ['PYTHON_EGG_CACHE'] = 'D:/workspace/trac-installation/eggs' import trac.web.main application = trac.web.main.dispatch_request Has anybody got an idea what could be the problem, or how to find out where it comes from?

    Read the article

  • What can I do to speed up createrepo?

    - by jsd
    We are using a yum repository to distribute our software to our production instances. Unfortunately, createrepo is becoming a bottleneck, and we only have 469 packages in the repository. $ time createrepo /opt/tm-yum-repo Spawning worker 0 with 469 pkgs Workers Finished Gathering worker results Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Sqlite DBs complete real 0m43.188s user 0m37.798s sys 0m1.296s What can I do to make it faster?

    Read the article

  • Linux buffer cache effect on IO writes?

    - by Patrick LeBoutillier
    I'm copying large files (3 x 30G) between 2 filesystems on a Linux server (kernel 2.6.37, 16 cores, 32G RAM) and I'm getting poor performance. I suspect that the usage of the buffer cache is killing the I/O performance. To try and narrow down the problem I used fio directly on the SAS disk to monitor the performance. Here is the output of 2 fio runs (the first with direct=1, the second one direct=0): Config: [test] rw=write blocksize=32k size=20G filename=/dev/sda # direct=1 Run 1: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/205M /s] [0/6K iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4667 write: io=20,480MB, bw=199MB/s, iops=6,381, runt=102698msec clat (usec): min=104, max=13,388, avg=152.06, stdev=72.43 bw (KB/s) : min=192448, max=213824, per=100.01%, avg=204232.82, stdev=4084.67 cpu : usr=3.37%, sys=16.55%, ctx=655410, majf=0, minf=29 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 250=99.50%, 500=0.45%, 750=0.01%, 1000=0.01% lat (msec): 2=0.01%, 4=0.02%, 10=0.01%, 20=0.01% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=199MB/s, minb=204MB/s, maxb=204MB/s, mint=102698msec, maxt=102698msec Disk stats (read/write): sda: ios=0/655238, merge=0/0, ticks=0/79552, in_queue=78640, util=76.55% Run 2: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/0K /s] [0/0 iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4733 write: io=20,480MB, bw=91,265KB/s, iops=2,852, runt=229786msec clat (usec): min=16, max=127K, avg=349.53, stdev=4694.98 bw (KB/s) : min=56013, max=1390016, per=101.47%, avg=92607.31, stdev=167453.17 cpu : usr=0.41%, sys=6.93%, ctx=21128, majf=0, minf=33 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 20=5.53%, 50=93.89%, 100=0.02%, 250=0.01%, 500=0.01% lat (msec): 2=0.01%, 4=0.01%, 10=0.01%, 20=0.01%, 50=0.12% lat (msec): 100=0.38%, 250=0.04% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=91,265KB/s, minb=93,455KB/s, maxb=93,455KB/s, mint=229786msec, maxt=229786msec Disk stats (read/write): sda: ios=8/79811, merge=7/7721388, ticks=9/32418456, in_queue=32471983, util=98.98% I'm not knowledgeable enough with fio to interpret the results, but I don't expect the overall performance using the buffer cache to be 50% less than with O_DIRECT. Can someone help me interpret the fio output? Are there any kernel tunings that could fix/minimize the problem? Thanks a lot,

    Read the article

  • Spanning-tree setup with incompatible switches

    - by wfaulk
    I have a set of eight HP ProCurve 2910al-48G Ethernet switches at my datacenter that are set up in a star topology with no physical loops. I want to partially mesh the switches for redundancy and manage the loops with a spanning-tree protocol. However, our connection to the datacenter is provided by two uplinks, each to a Cisco 3750. The datacenter's switches are handling the redundant connection using PVST spanning-tree, which is a Cisco-proprietary spanning-tree implementation that my HP switches do not support. It appears that my switches are not participating in the datacenter's spanning-tree domain, but are blindly passing the BPDUs between the two switchports on my side, which enables the datacenter's switches to recognize the loop and put one of the uplinks into the Blocking state. This is somewhat supposition, but I can confirm that, while my switches say that both of the uplink ports are forwarding, only one is passing any real quantity of data. (I am assuming that I cannot get the datacenter to move away from PVST. I don't know that I'd want them to make that significant of a change anyway.) The datacenter has also sent me this output from their switches (which I have expurgated of any identifiable info): 3750G-1#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 5 (GigabitEthernet1/0/5) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 0018.73d3.yyyy Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/5 Root FWD 4 128.5 P2p Gi1/0/6 Altn BLK 4 128.6 P2p Gi1/0/8 Altn BLK 4 128.8 P2p and: 3750G-2#sh spanning-tree vlan nnn VLAN0nnn Spanning tree enabled protocol ieee Root ID Priority 10 Address 00d0.0114.xxxx Cost 4 Port 6 (GigabitEthernet1/0/6) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32mmm (priority 32768 sys-id-ext nnn) Address 000f.f71e.zzzz Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Gi1/0/1 Desg FWD 4 128.1 P2p Gi1/0/5 Altn BLK 4 128.5 P2p Gi1/0/6 Root FWD 4 128.6 P2p Gi1/0/8 Desg FWD 4 128.8 P2p The uplinks to my switches are on Gi1/0/8 on both of their switches. The uplink ports are configured with a single tagged VLAN. I am also using a number of other tagged VLANs in my switch infrastructure. And, to be clear, I am passing the tagged VLAN I'm receiving from the datacenter to other ports on other switches in my infrastructure. My question is: how do I configure my switches so that I can use a spanning tree protocol inside my switch infrastructure without breaking the datacenter's spanning tree that I cannot participate in?

    Read the article

  • Profiles and using the local profile for a domain user

    - by Harry
    I’m having some trouble with profiles and would like to reach out for some help. I’ve tried to do some research to help myself along, but I’m not making much progress on my own. I’ve pretty much taken over the sys admin duties for my small lab, I don’t have much experience to justify it besides I’m the only with the time and dedication to go at it (The environment was in a state of disrepair). My network and domain I look over are extremely small by most standards, about 10 users at a time. They are pretty intensive activity on the network, and we do work with fairly large files. None of the network is online, which is nice at the moment because it allows me not to have another headache. On to my profile problem, I have set up roaming profiles for the users in the network. Now after a little research, I think I will be switching this to a hybrid of folder redirection and roaming profiles as this seems to best practice. I also don’t want the users having to wait for a long time if they have a bloated profile. Now I’ve finally got a build working using MDT. We have Mac Pros, and it wasn’t fun getting everything to play nice. The way I did this was by setting up a reference computer and installing all the software and tools that each user would need and editing the settings preferences to how we would need them. I think used MDT to do a sys prep and capture to create the image of my reference computer. Using the reference image I can push out my images to the rest of the desktops in my environment. The issue I’m having is when we join the computer to domain. The user can login and operate fine on the computer, but I’d like a more. When the user is logged on with their domain user name they lose a lot of the icons I had on my reference image, as well as the desktop background and some other miscellaneous settings. I would love to have the user log on using their domain user name and see the icons and desktop environment as I had it setup on the reference computer. I’m not sure if it is possible, or something simple that I’m missing, but any help would be greatly appreciated!

    Read the article

  • MS-DOS 6.22 keyboard configuration

    - by AlexV
    I have MS-DOS 6.22 in a virtual machine (Virtual PC 2007) and I wanted to properly configure the keyboard. The keyboard I have is a French-Canadian one (FYI in Windows XP my keyboard is labeled "Français (Canada) - Français (Canada)" in the control pannel). What do I need to put in autoexec.bat and config.sys in order to use the keyboard properly (Windows 3.11 will be installed later if it matters)? I haven't configured DOS since like 14 years so all my references are lost/trashed now :)

    Read the article

  • DBAN Hangs at PCI (sysfs)

    - by David
    I'm running Derik's Boot and Nuke 2.2.6 (beta). When I get to a blue screen(Not BSOD) the following is printed. Derik's Boot and Nuke 2.2.6 (beta) is starting. Waiting for USB devices to register..........................done. PCI (sys) After that, it just sits there forever... Any advice, other than an older version of DBAN? I have gotten this version of DBAN to work on an older machine before.

    Read the article

  • How can I log when reads to /dev/random block?

    - by ldrg
    I've noticed that since updating my server to Debian Squeeze the amount of entropy as reported by /proc/sys/kernel/random/entropy_avail is much lower than it was before the upgrade. I would like to know if this lower pool size is big enough to function with or if I need to look into getting more entropy sources. I think having a way to log blocking reads of /dev/random would show whether I have enough entropy or not.

    Read the article

  • dmidecode showing less Memory Capacity than Motherboard spec?

    - by starchx
    We got a supermicro server, http://www.supermicro.com/products/system/1u/5016/sys-5016i-ur.cfm, according spec, the server supports up to 32G memory when using ECC Register Memory. However, when I tried the dmidecode command, it says 24G max memory: [root@c1 ~]# dmidecode | grep Maximum Maximum Size: 256 kB Maximum Size: 1024 kB Maximum Size: 8192 kB Maximum Memory Module Size: 4096 MB Maximum Total Memory Size: 24576 MB Maximum Capacity: 24 GB Maximum Value: Unknown Which one I should trust?

    Read the article

  • Linux buffer cache effect on IO writes?

    - by Patrick LeBoutillier
    Hi, I'm copying large files (3 x 30G) between 2 filesystems on a Linux server (kernel 2.6.37, 16 cores, 32G RAM) and I'm getting poor performance. I suspect that the usage of the buffer cache is killing the I/O performance. To try and narrow down the problem I used fio directly on the SAS disk to monitor the performance. Here is the output of 2 fio runs (the first with direct=1, the second one direct=0): Config: [test] rw=write blocksize=32k size=20G filename=/dev/sda # direct=1 Run 1: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/205M /s] [0/6K iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4667 write: io=20,480MB, bw=199MB/s, iops=6,381, runt=102698msec clat (usec): min=104, max=13,388, avg=152.06, stdev=72.43 bw (KB/s) : min=192448, max=213824, per=100.01%, avg=204232.82, stdev=4084.67 cpu : usr=3.37%, sys=16.55%, ctx=655410, majf=0, minf=29 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 250=99.50%, 500=0.45%, 750=0.01%, 1000=0.01% lat (msec): 2=0.01%, 4=0.02%, 10=0.01%, 20=0.01% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=199MB/s, minb=204MB/s, maxb=204MB/s, mint=102698msec, maxt=102698msec Disk stats (read/write): sda: ios=0/655238, merge=0/0, ticks=0/79552, in_queue=78640, util=76.55% Run 2: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/0K /s] [0/0 iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4733 write: io=20,480MB, bw=91,265KB/s, iops=2,852, runt=229786msec clat (usec): min=16, max=127K, avg=349.53, stdev=4694.98 bw (KB/s) : min=56013, max=1390016, per=101.47%, avg=92607.31, stdev=167453.17 cpu : usr=0.41%, sys=6.93%, ctx=21128, majf=0, minf=33 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 20=5.53%, 50=93.89%, 100=0.02%, 250=0.01%, 500=0.01% lat (msec): 2=0.01%, 4=0.01%, 10=0.01%, 20=0.01%, 50=0.12% lat (msec): 100=0.38%, 250=0.04% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=91,265KB/s, minb=93,455KB/s, maxb=93,455KB/s, mint=229786msec, maxt=229786msec Disk stats (read/write): sda: ios=8/79811, merge=7/7721388, ticks=9/32418456, in_queue=32471983, util=98.98% I'm not knowledgeable enough with fio to interpret the results, but I don't expect the overall performance using the buffer cache to be 50% less than with O_DIRECT. Can someone help me interpret the fio output? Are there any kernel tunings that could fix/minimize the problem? Thanks a lot,

    Read the article

  • Windows 7 crashes with a blue screen

    - by Chinook pilot
    I am running win 7 32 bit on a Gateway Media Center. Without any interaction from me, and the only thing on the screen is my screen saver it crashes and the fault is "Stop" and a long string of numbers. I have had a "adapi sys message but now it seems to be this "Stop' MESSAGE. Any help will be appreciated.

    Read the article

  • XP Pro SP3: DRIVER_IRQL_NOT_LESS_OR_EQUAL on hibernate

    - by Margaret
    Hey all I'm running XP Pro SP3 on a Late 2007-era 2.2Ghz Macbook. Unfortunately, it's recently started giving me a Blue Screen of Death when I try to hibernate it. It gives me the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL", and at the bottom says that it's in "hiber_atapi.sys". Most of the Googling I've done thus far turns up things referring to Windows Server 2003, which is obviously less than useful. Anyone know any way to fix this short of a full re-install?

    Read the article

  • Very poor read performance compared to write performance on md(raid1) / crypt(luks) / lvm

    - by Android5360
    I'm experiencing very poor read performance over raid1/crypt/lvm. In the same time, write speeds are about 2x+ faster on the same setup. On another raid1 setup on the same machine I get normal read speeds (maybe because I'm not using cryptsetup). OS related disks: sda + sdb. I have raid1 configuration with two disks, both are in place. I'm using LVM over the RAID. No encryption. Both disks are WD Green, 5400 rpm. IO test results on this raid1: dd if=/dev/zero of=/tmp/output.img3 bs=8k count=256k conv=fsync - 2147483648 bytes (2.1 GB) copied, 22.3392 s, 96.1 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=/tmp/output.img3 of=/dev/null bs=8k - 2147483648 bytes (2.1 GB) copied, 15.9 s, 135 MB/s And here is the problematic setup (on the same machine). Currently I have only one sdc (WD Green, 5400rpm) configured in software raid1 + crypt (luks, serpent-xts-plain) + lvm. Tomorrow I will attach another disk (sdd) to complete this two-disk raid1 setup. IO tests results on this raid1: dd if=/dev/zero of=output.img3 bs=8k count=256k conv=fsync 2147483648 bytes (2.1 GB) copied, 17.7235 s, 121 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=output.img3 of=/dev/null bs=8k 2147483648 bytes (2.1 GB) copied, 36.2454 s, 59.2 MB/s We can see that the read performance is very very bad (59MB/s compared to 135MB/s when using no encryption). Nothing is using the disks during benchmark. I can confirm this because I checked with iostat and dstat. Details on the hardware: disks: all are WD green, 5400rpm, 64mb cache. cpu: FX-8350 at stock speed ram: 4x4GB at 1066Mhz. Details on the software: OS: Debian Wheezy 7, amd64 mdadm: v3.2.5 - 18th May 2012 LVM version: 2.02.95(2) (2012-03-06) LVM Library version: 1.02.74 (2012-03-06) LVM Driver version: 4.22.0 cryptsetup: 1.4.3 Here is how I configured the slow raid1+crypt+lvm setup: parted /dev/sdc mklabel gpt type: ext4 start: 2048s end: -1 Now the raid, crypt and the lvm configuration: mdadm --create /dev/md1 --level=1 --raid-disks=2 missing /dev/sdc cryptsetup --cipher serpent-xts-plain luksFormat /dev/md1 cryptsetup luksOpen /dev/md1 md1_crypt vgcreate vg_sql /dev/mapper/md1_crypt lvcreate -l 100%VG vg_sql -n lv_sql mkfs.ext4 /dev/mapper/vg_sql-lv-sql mount /dev/mapper/vg_sql-lv_sql /sql So guys, can you help me identify the reason and fix it? It has to be something with the cryptsetup as there is no such read slowdown on the other setup (sda+sdb) where no encryption is present. But I have no idea what to do. Thanks!

    Read the article

  • CPU/Mem/Disk utilization (average) after process has completed

    - by BassKozz
    Ubuntu Server 9.10 So there is the time command which will show you the time it took for a specific process/command to run after the command has completed. For example: :~$ time ls real 0m0.020s user 0m0.000s sys 0m0.000s I'd like to also collect the average CPU usage, Memory, and Disk (i/o) utilization after the process has completed using time (or another command if necessary). How can I accomplish this? Mainly I am using this to benchmark MySQL import performance using different innodb_buffer_pool_size settings.

    Read the article

  • prevent filesystem from entering read-only mode

    - by user788171
    I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

    Read the article

  • Linux Fiber Channel Host Setup Basic

    - by Jim
    I've been googling for about 4 hours now with no luck. I am trying to setup a Linux server running Oracle Server 6.3 as a Fiber Channel host. And then connect it to a Dell Compellent Fibre Channel Host contain a 500GB Volume. The Oracle server itself contains two Brocade 815 FC HBAs. I've discovered their WWN(I think) via cat /sys/class/fc_host/host1/port_name 0x100000051efc3d85 cat /sys/class/fc_host/host2/port_name 0x100000051efc3d9f The next part is where I am at a loss. I've used iSCSI before...is FC the same deal where you have an initiator and a target? If so where do I specific that in linux? I'm also new to Fiber Channel as a protocol, so i am unsure what is needed to make a transaction? WWN and port ID? Similar to IP:Port combination in the Ethernet world. I've read alot regarding using systool, multipath, fc_transport commands, however none of these is recognized as a valid command from Oracle Server 6.3 Appreciate the guidance and assistance. I installed sccsi-target-utils and can now run rescan-scsi-bus and sg_map -x. rescan-scsi-bus.sh -l -w -r Host adapter 0 (megaraid_sas) found. Host adapter 1 ((null)) found. Host adapter 2 ((null)) found. Host adapter 3 (ata_piix) found. Host adapter 4 (ata_piix) found. Scanning SCSI subsystem for new devices and remove devices that have disappeared Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, LUNs 0 1 2 3 4 5 6 7 Scanning for device 0 2 0 0 .... OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 0 2 1 0 ... OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 1 0 3 1 ... OLD: Host: scsi1 Channel: 00 Id: 03 Lun: 01 Vendor: COMPELNT Model: Compellent Vol Rev: 0505 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 2 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning host 3 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 3 0 0 0 ... REM: Host: scsi3 Channel: 00 Id: 00 Lun: 00 DEL: Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A Type: CD-ROM ANSI SCSI revision: 05 Scanning host 4 channels 0 for SCSI target IDs 0, LUNs 0 1 2 3 4 5 6 7 0 new device(s) found. 1 device(s) removed. and sg_map -x /dev/sg0 0 0 32 0 13 /dev/sg1 0 2 0 0 0 /dev/sda /dev/sg2 0 2 1 0 0 /dev/sdb /dev/sg4 1 0 3 1 0 /dev/sdc I'm not sure what this all means...

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >