Search Results

Search found 32596 results on 1304 pages for 'test developer'.

Page 490/1304 | < Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >

  • Solaris ldap Authentication

    - by Tman
    Iv been having a trouble trying to get my Solaris 10 server to authenticate against an eDir server.im managed to Set up my linux(RHeL,SLES) servers to authenticate against the ldap Server.which works fine. Here is my configuration Files. ldapclient list: NS_LDAP_FILE_VERSION= 2.0 NS_LDAP_BINDDN= cn=proxyuser,o=AEDev NS_LDAP_BINDPASSWD= {NS1}ecfa88f3a945c22222233 NS_LDAP_SERVERS= 192.168.0.19 NS_LDAP_SEARCH_BASEDN= ou=auth,o=AEDev NS_LDAP_AUTH= simple NS_LDAP_SEARCH_SCOPE= sub NS_LDAP_CACHETTL= 0 NS_LDAP_CREDENTIAL_LEVEL= anonymous NS_LDAP_SERVICE_SEARCH_DESC= group:ou=Groups,ou=auth,o=AEDev NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=users,ou=auth,o=AEDev?sub?objectClass=shadowAccount NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=auth,o=AEDev?sub?objectClass=posixAccount NS_LDAP_BIND_TIME= 10 NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:simple getent passwd works fine: root:x:0:0:Super-User:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh svctag:x:95:12:Service Tag UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: tlla:x:2012:100::/home/tlla: test:x:2011:100::/home/test: thato:x:2010:100::/home/thato: pam.conf login auth sufficient pam_unix_auth.so.1 #server_policy login auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass login auth required pam_dial_auth.so.1 rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_authtok_get.so.1 rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth sufficient pam_unix_auth.so.1 rlogin auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 rsh auth sufficient pam_unix_auth.so.1 #server_policy rsh auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other auth requisite pam_authtok_get.so.1 other auth required pam_dhkeys.so.1 other auth required pam_unix_cred.so.1 other auth sufficient pam_unix_auth.so.1 other auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass passwd auth required pam_passwd_auth.so.1 passwd auth sufficient pam_unix_auth.so.1 ssh account sufficient pam_unix.so.1 ssh account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other account requisite pam_roles.so.1 other account sufficient pam_unix_account.so.1 other account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other password required pam_dhkeys.so.1 other password requisite pam_authtok_get.so.1 other password requisite pam_authtok_check.so.1 other password required pam_authtok_store.so.1 other password sufficient pam_unix.so.1 other password sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass Local Authentication Works But LDAP Authentication Doesn't Work.

    Read the article

  • how to cause linux system datetime to run faster than real world datetime?

    - by JamesThomasMoon1979
    Background I want to monitor a running linux system over several days. It's a custom gentoo build and with much custom software on board. This software has ongoing maintenance timers and cron scripts and other clock driven events. I need to verify these scheduled events are working. Problem Waiting for the system to step through daily and weekly activity is a long wait time. And modifying all clock-based timers on the system would be time consuming. Yet, I often want to test a system's end-to-end scheduled activities without waiting a week. Potential Solution Have the linux system under test appear to run through it's daily cycle of activity within just a few hours. My Question for Serverfault Is there a way to cause the system's time to run faster than real world time? My first thought is manipulating the ntp daemon to repeatedly and smoothly increment the clock . Any other ideas? And yes, I know this may have strange side affects. However, the system has no important or time critical interactions with systems outside of itself. And this may be a valuable testing technique.

    Read the article

  • Understanding what needs to be in place for a server to send outgoing email from a linux box

    - by Matt
    I am attempting to configure an openSuse 11.1 box to send outgoing email for a domain that the same server is hosting. I don't understand enough about smtp servers and the like to know what needs to be in place and working. The system already had Postfix installed, and I confirmed it was running via a > sudo /etc/init.d/postfix status I examined the Postfix config file in /etc/main.cf and configured a couple of items regarding the domain/host name and such, but left it largely default. I attempted to send an email from the command line with the following command: > echo "test 123" | mail -s "test subject" [email protected] Where differentdomain.com was not the same domain as the one best hosted on the server. However, the email never reaches the target account. Any suggestions? EDIT: In the postfix log, (/var/log/mail.info, there's nothing in .err) I see that postfix is trying to connect to what appears to be a different smtp server on our network, with a connection refused: connect to ourdomain.com.inbound15.mxlogic.net[our ip address]:25: Connection refused However, I can't figure out why it is 1) trying to connect to that server and 2) not just sending the messages itself... I mean, isn't postfix an smtp server? I did a grep -ri on ourdomain from /etc and see no configuration files anywhere telling it to do this. Why is it?

    Read the article

  • How do I install PHP 5.3 on CentOS?

    - by fivelitresofsoda
    I have to install PHP 5.3 on my CentOS server. If I do yum install php, the base repository installs 5.1.6 which is too old for the applications I need to install. So I've been trying to use the IUS repository, following the official instructions from IUS: root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-2.ius.el5.noarch.rpm root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm root@linuxbox ~]# rpm -Uvh ius-release*.rpm epel-release*.rpm OK. Now I simply do yum install php53, etc. for all I need... but I get this error: Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/bin/php from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/bin/php-cgi from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/share/man/man1/php.1.gz from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /etc/php.ini from install of php53u-common-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-common-5.1.6-27.el5_5.3.x86_64 Error Summary ------------- I have no idea on how to solve this. I think I have to delete the base packages. However, as someone new to Linux, I don't know how to do that.

    Read the article

  • Kunagi LDAP configuration problems

    - by Willem de Vries
    We recently started with Scrum at our company and we wanted to start using Kunagi to test and see how it works. So I installed the kunagi_0.23.2.deb packet that I downloaded from their website, on my Ubuntu 11.04 running in tomcat6 using openjdk-6-jre. everything works fine except I can't get the LDAP to work. I have one AD server and one LDAP at my disposal for testing. For the LDAP I use the following info: -uri: ldap://192.168.1.11:389 -user: some_tested_user -passwd: the_pass -DN: dc=colosa,dc=net -LDAP Filter: (&(objectClass=user)) I tested various LDAP Filters, I don't know if I have the right one. However I get an erro when clicking "test LDAP". The error refers to the DN: Server service call error Calling service TestLdap failed. java.lang.RuntimeException: InvalidNameException: [LDAP: error code 34 - invalid DN] With the AD server I get no error while testing, yet I am not able to login I get: "Login faild" every time. I don't know if this is because of the LDAP Filter I entered, yet I can't get it to work. I have read this http://kunagi.org/iss652.html stating that I need to create my accounts inside Kunagi before I can login. So I did this with no effect. So basically my question is, what causes this DN string error (I am sure mine is right), and what LDAP Filter should i use? Any help would be highly appreciated.

    Read the article

  • Error with procmail script to use Maildir format

    - by bradlis7
    I have this code in /etc/procmailrc: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code to the sending user as well. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user. Sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Do I need a space between the two blocks? Thanks for the help.

    Read the article

  • What steps should I take to remove an employee from a linux server?

    - by user146059
    I was recently hired as the main developer of a small web company. It seems that I will be taking his place and I don't have much system admin experience. My non-technical bosses have instructed me to ensure that he will not be able to cause any damage to our system/database/application when he is gone. I know the basics of what needs to be done but was hoping to have a definitive list before it happens.

    Read the article

  • Packet drop measured by ethtool, tcpdump and ifconfig

    - by Rayne
    Hi all, I have a question regarding packet drops. I am running a test to determine when packet drops occur. I'm using a Spirent TestCenter through a switch (necessary to aggregate Ethernet traffic from 5 ports to one optical link) to a server using a Myricom card. While running my test, if the input rate is below a certain value, ethtool does not report any drop (except dropped_multicast_filtered which is incrementing at a very slow rate). However, tcpdump reports X number of packets "dropped by kernel". Then if I increase the input rate, ethtool reports drops but "ifconfig eth2" does not. In fact, ifconfig doesn't seem to report any packet drops at all. Do they all measure packet drops at different "levels", i.e. ethtool at the NIC level, tcpdump at the kernel level etc? And am I right to say that in the journey of an incoming packet, the NIC level is the "so-called" first level, then the kernel, then the user application? So any packet drop is likely to happen first at the NIC, then the kernel, then the user application? So if there is no packet drop at the NIC, but packet drop at the kernel, then the bottleneck is not at the NIC? Thank you. Regards, Rayne

    Read the article

  • Gentoo Linux useful utilities

    - by Alakdae
    I want to make a list of utilities that come in handy in Gentoo (general Linux tools available in all distributions also appreciated). What tools and commands do you use and consider helpful in administration of a Gentoo server? I will update the list with command from answers from time to time. eclean Utility for cleaning distfiles and binary packages. Usage example: eclean distfiles Usage example output: Cleans out the files in /usr/portage/distfiles. Pretty handy. Package: app-portage/gentoolkit eix Very useful tool for getting information about a package. Similar to "emerge -s" but much faster and more precise. Usage example: eix gentoolkit Usage example output: Show information about package such as: available versions, masked versions, installed versions and description. Package: app-portage/eix eix-test-obsolete Check system for obsolete, redundant, uninstalled entries in package.keywords, package.mask, package.unmask, package.use and package.cflags Usage example: eix-test-obsolete Usage example output: Shows non-matching entries, redundant entries, and uninstalled entries. Package: app-portage/eix equery Another very useful tool for getting information about packages (listing package files, checking which files belong to which package and much more) Usage example: equery b emerge Usage example output: Show which packages installed a file called emerge Package: app-portage/gentoolkit genlop Utility for extracting information about emerged ebuilds Usage example: genlop -l --date yesterday Usage example output: Show a list of packages that have been emerged yesterdayPackage: app-portage/genlop glsa-check Checks system if it's affected by GLSAs (security issues) Usage example: glsa-check -l affected Usage example output: List of GLSA that the system is affected by. Package: app-portage/gentoolkit rc-update Utility for managing (adding, deleting) runlevel scripts. Usage example: rc-update add syslog-ng default Usage example output: Adds syslog-ng to default runlevel. Package: sys-apps/baselayout revdep-rebuild Scans libraries and binaries for missing shared library dependencies Usage example: revdep-rebuild Usage example output: Gather binaries and libraries information, check for dependencies, rebuild packages with missing dependencies Package: app-portage/gentoolkit

    Read the article

  • supervisord launches with wrong setuid

    - by friendzis
    I am trying to test a pilot system with nginx connecting to uwsgi served application controlled by supervisord running on ubuntu-server. Application is written in python with Flask in virtualenv, although I'm not sure if that is relevant. To test the system I have created a simple hello world with flask. I want nginx and uwsgi both to run as www-data user. If I launch uwsgi "manually" from root shell I can see uwsgi processes runing as appropriate user (www-data). Although, if I let supervisor launch the application something strange happens - uwsgi processes are runing under my user (friendzis). Consequently, socket file gets created under wrong user and nginx cannot communicate with my applicaion. note: the linux server runs as Hyper-V VM, under Windows Server 2008. Relevant configuration: [uwsgi] socket = /var/www/sockets/cowsay.sock chmod-socket = 666 abstract-socket = false master = true workers = 2 uid = www-data gid = www-data chdir = /var/www/cowsay/cowsay pp = /var/www/cowsay/cowsay pyhome = /var/www/cowsay module = cowsay callable = app supervisor [program:cowsay] command = /var/www/cowsay/bin/uwsgi -s /var/www/sockets/cowsay.sock -w cowsay:app directory = /var/www/cowsay/cowsay user = www-data autostart = true autorestart = true stdout_logfile = /var/www/cowsay/log/supervisor.log redirect_stderr = true stopsignal = QUIT I'm sure I'm missing some minor detail, but I'm unable to notice it. Would appreciate any suggestions.

    Read the article

  • Odd behavior of setting REMOTE_ADDR between Apache, Nginx, and AWS ELB

    - by Chris Drumgoole
    I have encountered a strange issue and am curious if others have encountered this as well. and if there is absolutely anything that can be done.. We have a set up where we have multiple AWS EC2 Linux machines sitting behind a ELB. The EC2 machines are running Nginx. Let's refer to these as my production machines (because they are!) I also have a Rackspace cloud machine running apache. Completely separate. Let's call this the test server. Now, there's a ISP here in Singapore that seems to be funneling traffic through a transparent proxy or something, and when you do a IP check, the IP often changes. In fact, I noticed that when I check on http://www.whatismyip.com, the ip seems to be stable (doesn't change) across refreshes. But, http://www.whatismyipaddress.com, on refreshing, the IP changes! (so my ISP is doing weird stuff). Now, back to my set up, I noticed a couple of things: Checking the REMOTE_ADDR variable from PHP when connecting to a single Nginx production machine (bypassing the load balancer), is set to the stable IP that does change. Checking the REMOTE_ADDR variable from PHP when connecting to the test Apache server, it is set to the IP that does change on refreshes. Checking the headers when connecting to the nginx production machines through the ELB, the ELB sets the HTTP_X_FORWARDED_FOR to the stable IP. Has anyone experienced this odd behavior? Is there nothing that I can do? And which IP should I "trust"? (the one Apache gives, or the one ELB and Nginx gives?) Thanks! Chris

    Read the article

  • emacs, writing custom commands which use term-mode

    - by valya
    Hello, I'm using Emacs and M-x term for a terminal. Since my typical workflow looks like this: edit some code C-x C-o to the terminal buffer (or C-x b term[Enter] or something) press Up key to use the last command press Enter to run it C-x C-o to go back I want to bind all of these (except the first step... maybe) to one command, I believe Emacs is awesome enough to do that :-) So, a command must: go to the buffer with terminal (maybe it shouldn't change any windows at all, maybe it should split the window vertially (if it weren't split already) and use the right sid) run a last command what've been run there go back to the last buffer/part of the screen Thank you! I'm not really used to the Emacs scripting system, and I hope someone will help me and someone else will be able to use the answer to improve his workflow, since I believe this is a pretty common one Examples of commands: python manage.py test python manage.py test stats python solve.py # for project-euler puzzles :-) the first and the second runs over a ssh (in a terminal) sometimes (I like developing with vagrant) I understand that it's easy to bind the first and the third ones, but the second changes too often - I'd just like to "run last command"

    Read the article

  • Poor Write Performance in VM inside Proxmox PVE 2.0

    - by sorsenne
    I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

    Read the article

  • varnish3, mod_geoip with apache2 using mod_rewrite and mod_rpaf

    - by mursalat
    I am maintaining a website with 3 different versions of the site, with 3 different languages, handles with a single system written in php, which takes in environment variables based on the domain name that is being accessed. These are the three sites: myshop.com : english international version myshop.eu : european version of site myshop.ru : russian version of the site when myshop.com is accessed from russia it is to be redirected to myshop.ru, and any country from europe accesses myshop.com, is redirected to myshop.eu, and international visitors stay at myshop.com, although they can go to the country specific site. All these redirections for the country is done using GeoIP apache2 mod in order to determine the country code, which is used in a RewriteCondition to state a RewriteRule, there are some exceptions of IPs that do not do the rewrite for, basically the IPs of the developer's PCs. The site has been doing just fine, until we decided to setup varnish to give the site a boost, it really did give it a great boost, but the country specific rewrites has become buggy. What started to happen is that a russian visitor can go to myshop.com and won't be redirected, until he clicks a random link (perhaps a link not cached by varnish yet) and the user is redirected to their specific country. For that i setup mod_rpaf, and for exceptions to the rewrite rule (for the developer's ip), i used this RewriteCond %{HTTP:X-FORWARDED-FOR} !^43\.43\.43\.43, and i restarted varnish and apache2, it worked for a while, then it messed up again. And whole day i have been doing changes however i have little no clue as to what's going on, sometimes it works, and sometimes it doesn't, and sometimes it half works, etc... As for geoip, i used a php to check the $_SERVER variable, and here is the general idea of the output [HTTP_X_FORWARDED_FOR] => 43.43.43.44 [HTTP_X_VARNISH] => 1705675599 [SERVER_ADDR] => 127.0.0.1 [SERVER_PORT] => 80 [REMOTE_ADDR] => 43.43.43.44 [GEOIP_ADDR] => 43.43.43.44 [GEOIP_CONTINENT_CODE] => EU [GEOIP_COUNTRY_CODE] => FR [GEOIP_COUNTRY_NAME] => France Now, thanks to the "random" redirects, i hardly have a clue as to what is going on, so can you guys please give me some ideas as to what tools to use to debug this? I have tried to see the redirect logs, but they really dont show much, and varnishlog isn't helping much either - although i must admit i am no professional at varnish. I believe the problem is with varnish trying to cache the url, and thus apache redirects are not being done properly, however visits the site first has a redirect, and based on that other users are served the content, depending on from where the user was when the cache was last updated, is it correct? if so, how can i solve the problem? Also, i have the option of using geoip redirects on varnish3 instead of using apache2 to do the redirects, is that what the best practice is? Any suggestion as to debugging this or to fix this would be helpful! thnx!

    Read the article

  • IIS running but not serving content

    - by Kyle
    I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

    Read the article

  • extension shortcuts in chrome dont have text in them, windows 7

    - by bboyreason
    I have a few extensions next to my URL bar in chrome on windows 7. When I press any of them, or even the bookmark star, the text box that pops up is clear. I am using the following extensions: ablock plus, googleTranslate, firebugLite, ghostery, avastWebRep, Ultimate UserAgent switcher, Web developer toolbar, desprotetor de links, DNT plus, and WOT. I am set to block popups but not javascript in chrome and have a blackout theme installed. any ideas?

    Read the article

  • Repairing inconsistent pages in database

    - by Raj
    We have a SQL 2000 DB. The server crashed due to Raid array failure. Now when we run DBCC CHECKDB, we get an error that there are 27 consistency errors in 9 pages. When we run DBCC PAGE on these pages, we get this: Msg 8939, Level 16, State 106, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (m_freeCnt == freeCnt) failed. Values are 2 and 19. Msg 8939, Level 16, State 108, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (emptySlotCnt == 0) failed. Values are 1 and 0. Since the indicated index is non-clustered and is created by a unique constarint that includes 2 columns, we tried dropping and recreating the index. This resulted in the following error: CREATE UNIQUE INDEX terminated because a duplicate key was found for index ID 2. Most significant primary key is '3280'. The statement has been terminated. However running Select var_id,result_on from tests group by var_id,result_on having count(*)>1 returns 0 rows. Here is what we are planning to do: Restore a pre-server crash copy of the DB and run DBCC CHECKDB If that returns clean, then restore again with no recovery Apply all subequent TLOG backups Stop production app, take a tail log backup and apply that too Drop prod DB and rename the freshly restored DB to make it prod Start prod app Could someone please punch holes in this approach? Maybe, suggest a different approach? What we need is minimum downtime. SQL 2000 DB Size 94 GB The table that has corrupt pages has 460 Million+ rows of data Thanks for the help. Raj

    Read the article

  • Mysql Cluster not working on Ubuntu

    - by user53864
    I am unable to setup MySQL Cluster on ubuntu servers. As a starting point I started from the link but I am not successful and the tar ball version I download is 6.3.45. As I wanted to test the mysql cluster, the Data node and SQL node are same but sql never appeared as connected in management node console and it looks like below. [ndbd(NDB)] 2 node(s) id=2 @192.168.1.107 (Version: version number, Nodegroup: 0, Master) id=3 @192.168.1.108 (Version: version number, Nodegroup: 0) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.1.105 (Version: version number) [mysqld(API)] 2 node(s) id=4 (not connected, accepting connect from 192.168.1.107) id=5 (not connected, accepting connect from 192.168.1.108) On all the 3 machines mysql-server & client(apt-get install mysql-server mysql-client) were already installed and I completely stopped and also removed them at the system start up. Now the mysqld is from extracted cluster tar ball(/usr/local/mysql/support-files/mysql.server). As for testing, I created a test database on both the data nodes but the tables are also not syncing on other node. I checked many links, configurations are remained similar in all the links but somewhere it's going wrong. Anymore extra package is required?, Could anyone help me here..?. I am trying this for past 3 days... Thank you!

    Read the article

  • Only show hidden files in certain directories

    - by Joseph Silvashy
    On a Unix system (or more specifically on OS X) is it possible to show hidden files in only some directories? For example as a developer I want to see the hidden files in my Rails projects but not on my desktop as well. I guess I'm just tired of seeing all these .DS_Store and .trashes files swimming around, any remedies not directly related are welcome too!

    Read the article

  • Strange ASP.NET Queue Performance Counters Behavior?

    - by LemurTech
    We have an ASP.NET 2.0 site running in classic mode. I am seeing very strange behavior in the performance counter values. Perhaps these are bugs (I've been all over Google trying to verify this, without much luck), or perhaps it is just my inexperience with monitoring these things. This PerfMon graph (http://imgur.com/Jv5io5J) represents a load test where I add up to 350 virtual users to the site, at a rate of about 1/sec, performing relatively simple page browsing. At the end of the test, I gradually taper off the number of users. This is a 4 CPU server. Machine.config settings for are at the defaults. The solid blue line is ASP.NET Apps v2.x\Requests Executing for the application in question. The profile makes perfect sense, with a quick ramp-up to 32 executing requests (minWorkerThreads x 4CPUs), followed by a slower ramp-up to 48 ((maxWorkerThreads - minWorkerThreads) x 4CPUs). The solid yellow line is ASP.NET v2.x\Requests Queued. Again, this makes sense: after the initial 32 request threads are activated, the queue begins to build as new thread initialization can't keep pace with incoming requests. But as executing requests reaches its highest possible value of 48, the counter for ASP.NET Apps v2.x\Requests Queued (green solid line) suddenly springs to life and maintains step with the yellow counter. As far as I can tell, and with no other apps running on the server, these two counters should have had the same values from the start. One other odd thing: The counter for ASP.NET v2.x\Request Wait Time (dotted yellow line) also does not spring to life until executing requests reaches 48. Shouldn't I be seeing values here from the moment ASP.NET v2.x\Requests Queued begins to build? And likewise, why would ASP.NET Apps v2.x\Request Execution Time (dotted blue) increase significantly only after that peak of 48 is reached? Shouldn't it ramp-up gradually along with queued requests?

    Read the article

  • Windows Home Server vs Windows 7

    - by jiewmeng
    i am a home user of windows 7 and really like the new features like jumplists taskbar thumbnails etc i am also exploring benefits of homegroup, federated search and since i am a developer intending to start ASP.NET MVC 2 development from PHP, i am thinking a Windows Home Server maybe useful for me. but what i need, IIS, homegroups etc are offered in Windows 7 too. i am wondering why will i want to have a home server instead? i believe it will offer some benefits i should know of?

    Read the article

  • Issues with ASP.NET via Apache/mod_mono on Ubuntu.

    - by Matthew Scharley
    I run an Ubuntu test server, and my deployment system is also Ubuntu. I've recently been trying to get ASP.NET to work on my test server so that we can take it live. I managed to get it installed, and configured properly, and my application is installed and running, but I can't get anything to work. The error I keep receiving is below, if anyone has any clue what might be going on, it would be greatly appreciated. Server Error in '/' Application Standard output has not been redirected or process has not been started. Description: HTTP 500. Error processing request. Stack Trace: System.InvalidOperationException: Standard output has not been redirected or process has not been started. at System.Diagnostics.Process.CancelErrorRead () [0x00000] at (wrapper remoting-invoke-with-check) System.Diagnostics.Process:CancelErrorRead () at Mono.CSharp.CSharpCodeCompiler.CompileFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at Mono.CSharp.CSharpCodeCompiler.CompileAssemblyFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromFile (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath, System.CodeDom.Compiler.CompilerParameters options) [0x00000] at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] at System.Web.Compilation.BuildManager.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] Version information: Mono Version: 2.0.50727.42; ASP.NET Version: 2.0.50727.42 Apache version String: Apache/2.2.11 (Ubuntu) mod_mono/2.0 PHP/5.2.6-3ubuntu4.2 with Suhosin-Patch Server at dev Port 80 PS: I had to add three DLL's to the /bin directory in my application, copying them from Windows because I couldn't find them in any of Mono's packages. This might or might not be causing problems, I don't know. The list that I had to add is: System.Web.Abstractions System.Web.Routing System.Web.Mvc

    Read the article

  • Why does "commit" appear in the mysql slow query log?

    - by Tom
    In our MySQL slow query logs I often see lines that just say "COMMIT". What causes a commit to take time? Another way to ask this question is: "How can I reproduce getting a slow commit; statement with some test queries?" From my investigation so far I have found that if there is a slow query within a transaction, then it is the slow query that gets output into the slow log, not the commit itself. Testing In mysql command line client: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=benchmark(9999999, md5('This is to slow down the update')) WHERE id = 21560; Query OK, 0 rows affected (2.32 sec) Rows matched: 1 Changed: 0 Warnings: 0 At this point (before the commit) the UPDATE is already in the slow log. mysql commit; Query OK, 0 rows affected (0.01 sec) The commit happens fast, it never appeared in the slow log. I also tried a UPDATE which changes a large amount of data but again it was the UPDATE that was slow not the COMMIT. However, I can reproduce a slow ROLLBACK that takes 46s and gets output to the slow log: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=CONCAT(myfield,'TEST'); Query OK, 481446 rows affected (53.31 sec) Rows matched: 481446 Changed: 481446 Warnings: 0 mysql rollback; Query OK, 0 rows affected (46.09 sec) I understand why rollback has a lot of work to do and therefore takes some time. But I'm still struggling to understand the COMMIT situation - i.e. why it might take a while.

    Read the article

  • tail -f and then exit on matching string

    - by Patrick
    I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string. I have simplified to the following test case. test.sh is listed below: #!/bin/sh rm -f child.out ./child.sh > child.out & tail -f child.out | grep -q B child.sh is listed below: #!/bin/sh echo A sleep 20 echo B echo C sleep 40 echo D The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help. Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

    Read the article

< Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >