Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 491/613 | < Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >

• Linux: Force fsck of a read-only mounted filesystem?

  - by Timothy Miller

  I'm developing for a headless embedded appliance, running CentOS 6.2. The user can connect a keyboard, but not a monitor, and a serial console would require opening the case, something we don't want the user to have to do. This all pretty much obviates the possibility of using a recovery USB drive to boot from, unless all it does is blindly reimage the harddrive. I would like to provide some recovery facilities, and I have written a tool that comes up on /dev/tty1 in place of getty to provide these functions. One such function is fsck. I have found out how to remount the root and other file systems read-only. Now that they are read-only, it should be safe to fsck them and then reboot. Unfortunately, fsck complains to me that the filesystems are mounted and refuses to do anything. How can I force fsck to run on a read-only mounted partition? Based on my research, this is going to have to be something obscure. "-f" just means to force repair of a clean (but unmounted) partition. I need to repair a clean or unclean mounted partition. From what I read, this is something "only experts" should do, but no one has bothered to explain how the experts do it. I'm hoping someone can reveal this to me. BTW, I've noticed that e2fsck 1.42.4 on Gentoo will let you fsck a mounted partition, even mounted read-write, but it seems only to do so if fsck is run from a terminal, so it can ask the user if they're sure they want to do something so dangerous. I'm not sure if the CentOS version does the same thing, but it appears that fsck CAN repair a mounted partition, but it flatly refuses to when not run from a terminal. One last-resort option is for me to compile my own hacked fsck. But I'm afraid I'll mess it up in some unexpected way. Thanks! Note: Originally posted here.

  Read the article

• Configuring apache and php to handle many connections

  - by Marc

  My preliminary setup is like this. Two QuadCore 8GB servers running debian 6, with php and apache, One QuadCore 16GB server running debian 6, with mysql My plan is to have one 8Gb server to act as a proxy server, using vertx java to handle connections. I will let vertx use HttpClient to send web requests to the second 8GB server. This would have apache installed and use php to deliver any information that it gets from the mysql server on the third, 16GB server. The main reason I want this setup is to have things separated, so the "proxy" will be the only way to access the system, as the other two server will only be reachable from the local network. I can have the vertx proxy handle 5000+ concurrent connections, but, I don't know how to configure apache to handle all the requests coming from the proxy. Php will connect over mysqli with persistent connection pool of 500-800 connections, the mysql server seems not to have any issues on this part. In previous projects, the apache part was always causing issues, no matter how I set it up. I might not fully understand how to setup apache, since normally apache should handle many concurrent connections, but it does seem to now.

  Read the article

• Exchange DEAD! Server recovered but no users can log in

  - by erotsppa

  Yesterday we had a hardware failure and brought our exchange server down. The hardware was repaired and the server was brought back up. Windows server 2008 did the disk check upon bootup and everything was recovered. However, no users can log into their exchange account! This is true with IMAP, Exchange and OWA! All three of them, refused to accept any users. For example when I try to access OWA, I get the following page http://pastie.org/584061 We verified that all the services are up (IMAP, POP, SMTP, IIS etc). We were able to connect to all those services with their respective ports through telnet. What could be the problem? It looks like the database cannot be mounted, from Exchange management console, when I try to mount the database it gives: Microsoft Exchange Error Failed to mount database 'Mailbox Database'. Mailbox Database Failed Error: Exchange is unable to mount the database that you specified. Specified database: SERVER\First Storage Group\Mailbox Database; Error code: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-528) . I read online that there is a repair utility, so I tried it. I navigated to my edb file and ran eseutil /p "Mailbox Database.edb". It printed the following output *Repair completed. Database corruption has been repaired! Note: It is recommended that you immediately perform a full backup of this database. If you restore a backup made before the repair, the database will be rolled back to the state it was in at the time of that backup. Operation completed successfully with 595 (JET_wrnDatabaseRepaired, Database cor ruption has been repaired) after 885.750 seconds.* However I am still unable to mount!

  Read the article

• sorry, the maximum allowed clients from your host (10) are already connected" FTP error

  - by Sejanus

  Hello, I keep getting the "sorry, the maximum allowed clients from your host (10) are already connected" error whenever I try to transfer a large number of files. At first I thought it's a filezilla bug, however I get the same error basically with every FTP client I've tried, including Total Commander under Wine. I do not get that error using Windows. I did try to limit maximum allowed connections for Filezilla, both in server settings and in global settings, it didnt change anything. I did try to switch between passive and active modes (not sure if it's related at all, just last desperate attempt), and it didnt change anything either. When I try to use native ftp client (not sure how is it called, the one in Places - Connect to a server) I get abstract "connection refused" error every time I transfer large number of files. Connection is refused for separate particular files, if I click "Ignore" each time the rest of files are transfered perfectly well, so I assume it's the very same error. Anything I could do? This really drives me mad, transfering large numbers of files is a part of my everyday job... P.S. and this happens with many different FTP servers. Also I dont get this error in Windows. So I assume it's not a server problem. P.P.S. I am aware of similar question here, the answer provided just didn't solve it to me.

  Read the article

• Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

  - by dgwilson

  We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

  Read the article

• Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

  - by dgwilson

  We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing. EDIT: If I currently have been trying: sudo route flush sudo route add default 192.168.19.1 This gets everything to work for about a minute. But after such minute it "forgets" the routing to WiFi while retaining LAN's (en0) routing. If I unplug and replug my LAN (en0) cable, the process works for another minute.

  Read the article

• Openfire on EC2 with Jingle

  - by Bjorn Roche

  I would like to run Openfire (or another XMPP server) on EC2. At the moment this is just for testing, so easy setup and configuration are important, as is low cost. At some point, however, if things go well, it will be important to scale this. Ideally, it would be nice to not have to switch software when the scaling happens, but if a switch needs to happen later it certainly can. My requirements are: basic XMPP services, including muc and pubsub. Logins controlled from an external API. Preferably, when a user attempts to connect, the XMPP server checks with the api to see if their username and password are correct, but I can also have the API keep the XMPP server up to date on new users, deleted users, pasword changes and so on. I see Openfire has a "user service" API. Not ideal, but it looks workable. Jingle, including relay and STUN. It's not at all clear to me if the Jingle Nodes plugin takes care of this. I'm a bit confused about what's required to set this up, and I'd rather know in advance than be confused along the way :). eg It seems like STUN servers require more than one IP address. Can Openfire do all this for me, including stun and media relay on a single machine? Is this hard to configure on EC2 with Openfire? What are the basic steps? Would this be easier with something else like, say Tigase? What about database? Should I use amazon's database service, or run a db on the same machine? Would the server be compatible with a service like http://www.siteuptime.com/ Thanks!

  Read the article

• How to determine which ports are open/closed on a FIREWALL?

  - by Rahl

  It seems no one has asked this question before (most regard host-based firewalls). Anyone familiar with port scanning tools (e.g. nmap) knows all about SYN scanning, FIN scanning, and the like to determine open ports on a host machine. Question is though, how do you determine the open ports on a firewall itself (disregard whether the host you're trying to connect to behind the firewall has those particular ports open or closed). This is assuming the firewall is blocking your IP connection. Example: We all communicate with serverfault.com through port 80 (web traffic). A scan on a host would reveal port 80 is open. If serverfault.com is behind a firewall and still allows this traffic through, then we can assume the firewall has port 80 open also. Now let's assume the firewall is blocking you (e.g. your IP address is under the deny list or is missing in the allowed list). You know port 80 has to be open (it works for appropriate IP addresses), but when you (the disallowed IP) attempt any scanning, all port scan attempts on the firewall drop the packet (including port 80, which we know to be open). So, how might we accomplish a direct firewall scan to reveal open/closed ports on the firewall itself, while still using the disallowed IP?

  Read the article

• Windows xp mapped drives disconnect from Windows 7 on Peer to Peer network

  - by Kathryn Codo

  I have a 5 user peer to peer network. 2-XP machines, 3- Windows 7 machines and a Windows 7 machine acting as the file server. I have NO issues with the Windows 7 machines staying connected via the mapped drives to the "server". However, once a day the 2 XP machines will not connect to the Windows 7 machine "server" via the mapped drives. I must restart the "server" in order to see the server and access the files via the mapped drives or Explorer. I have tried the persistent : yes command in NET USE, on the XP machines and also setting a static IP address on the "server". I've turned the firewall off on the "server:, no difference so I turned the firewall back on. No interruption occurs with the internet when this happens, just can't see the server. Again, the Windows 7 users are unaffected. I have gone into the advanced network settings on the "server" and added read/write permissions for Everyone as well as the users of the XP machines. I have double checked that we are all on the same WORKGROUP. I'm at a loss. It seems to happen around mid-day and I've not been able to find any activity that is happening at this time (Like someone plugging in a thumbdrive). Any suggestions would be greatly appreciated as my client is running old XP software he no longer has the disks for and needs for his engineering firm.

  Read the article

• Default browser hangs

  - by Craig Hinrichs

  Intermittent hangs would occur when I would use Internet Explorer to open a new main page or new tab to a site I know would be up. The browser would open and say "Waiting for site example.com" and do nothing more. If I closed the window and reopened it it would immediately connect. Over time I would have to close and reopen the window to get to the page. This would happen to any page, including Google. Got sick of it and started using Chrome. I recently upgraded my anti-virus and am now experiencing the same issue with Chrome. I use AVG for my antivirus. Empirically it seems that if I don't make Chrome my default browser I don't experience the issue. I tested this theory for over two hours yesterday. Possible issues I have found this could be but not confirmed yet: MTU settings are not correct. I am infected but my antivirus has not caught it (unlikely but possible) ?? I would like to think this is related to my antivirus but I am unsure how to verify. I don't like the idea of killing my antivirus if #2 is a possibility. I am looking for tips on how I can troubleshoot possible issues.

  Read the article

• Using pre-made patch cables on a punch down block?

  - by Trevor Harrison

  I need to add a 24 port switch to my wiring closet. In the (distant) past, I usually just punched each port of the switch to a 110 block on the wall (using hand-made cables), and cross connect between that and the 110 block that has the runs to each workstation. To save time, I'm thinking of buying 12 pre-made drop cables, cutting them in half (so 24 single ended cables), and punching those to my 110 block. The things I'm worried about are wire type (ie. solid vs. strands) and color scheme. I really don't know if they use different wire types (still?), but I remember that being an issue at one point. Can anyone comment on this? (I definitely won't feel comfortable trying to punch stranded wiring on my 110 block) Also, picking up a random pre-built cable I had laying around, I noticed that the color scheme used didn't appear to be T568B, but T568A, which would clash with the rest of my wall. Anyone know of an online source that specifies these things? I've looked at www.cablesforless.com (which does have nicer prices) and www.cablestogo.com (which seem stupid expensive) so far. Cables For Less doesn't specify wiring scheme, Cables To Go does specify T568B. Both seem to specify stranded wires instead of solid.

  Read the article

• Long Gigabit Ethernet Run

  - by Timothy R. Butler

  I am trying to get an Gig-E network between two buildings that are approximately 260 ft. away. While some TRENDnet switches failed to be able to connect to each other over Cat 6 at that distance, two Netgear 5-port Gig-E switches do so just fine. However, it still fails after I put in place APC PNET1GB ethernet surge protectors at each end before the line connects to the respective switches. So I find myself wondering if I simply need to find a better surge protector that doesn't degrade the signal as much (if so, what kind would you recommend?) or if I should give up on copper and use fiber between the buildings. If I opt to go the latter route, I could really use some pointers. It looks like LC connectors are the most common, but I keep running into some others as well. A media converter on each end seems like the simplest solution, but perhaps a Gig-E switch with an SFP port would make more sense? Given a very limited budget, sticking with my existing copper seems best, but if it is bound to be a headache, a 100 meter fiber cable is something I think I can swing cost wise.

  Read the article

• Lightweight Linux distro that includes developer tools? (or, the most BSD-like Linux)

  - by RevAaron

  I cut my teeth on Minix and Slackware 1.1, but I've been in the OS X Wilderness for the last few years. I'm trying to standardize on a Linux distribution for personal and work-related use on less powerful laptops and under virtualization. So far, NetBSD and OpenBSD are the best fit for my purposes- but after plenty of frustration I've come to the conclusion that I need to stick with Linux to get the hardware and software support that comes with it. What I like about NetBSD/OpenBSD that I'd like to keep: X, but no default KDE, GNOME or XFCE! A sensible /etc and dot file setup- startx calls xinit, xinit looks for ~/.xinitrc; nothing more complicated than that is needed. Command line tools and file-based configuration: I shouldn't need a GUI to connect to a WAP. Decent selection of binary packages; building from source is OK, but nothing source-only like Gentoo. pkg_add (BSD) and apt-get both have treated me well in the past. Modest RAM and HDD requirements: boot + X + awesome+ two xterms takes up 80 MB on OpenBSD and 240 MB on Debian 5 and Crunchbang In my experience, most "lightweight" and Live CDs focus on a nice desktop environment crammed into a CD or USB stick; once you add build-essentials you end up with something just about as bloated as Ubuntu or Debian full install. Crunchbang is a great example. Thanks in advance for all suggestions!

  Read the article

• Networking Home Office

  - by Matt

  I'm in the process of building an office in my garden. It's about 25m away from my house. I'd like to run a wired network connection to the office. I'd rather not go down the powerline route, as speeds don't seem great, and I'm likely to want to be moving a lot of data around on the internal network. I have an electrician who is running armoured electrical cable to the office, and is providing conduit for me to run network cable. My questions are: 1) What type of cable to run 2) How I terminate/connect it at both ends I could get something like armoured cat6 utp solid core (like this: http://www.netstoredirect.com/cat6-cable/289166-external-armoured-cat6-utp-solid-cable-price-per-metre.html) which seems fairly robust, but then I have to terminate it. Additionally, where the cable enters my house, there is about another 15m to where my router is situated. I also read this artice: http://www.audioholics.com/audio-video-cables/bjc-cat-network-cable-quality-interview which scared me into realising I don't know what I'm doing!! particularly with termination. Or I could get an "cat6 external patch cable" (e.g http://www.netstoredirect.com/rj45-network-cables/239231-external-cat6-utp-ldpe-rj45-patch-leads.html) and run that in the conduit, and work out how to terminate it at the house end. At the office end I guess I can just plug it into a switch. Any help? Thanks

  Read the article

• DHCP not responding from laptop or router, but works on directly plugged PC?

  - by Matt H

  I'm at my sister in law's place in Singapore. I'm not from Singapore but am here for a few months. She has some sort of cable modem made by motorolla (SB5101 Surfboard). I think it goes, through starhub or similar provider. Anyhow, her PC is directly attached by cable (not wireless) and she can access the internet. There is no wireless router connected to it. The PC is configured with DHCP and appears to be working. However, the moment I unplug her PC and plug in my laptop, it doesn't get an address. The interesting thing here is that I also see this toredo tunnel adaptor etc. I'm not familiar with what that is. It appears to be being assigned an IP v6 address and an IP v4 address. I thought perhaps it's my laptop, but also when I plug in my DDWRT based router, it also fails to get a DHCP assigned address on the WAN port. I can't also seem to connect into any web configuration on the motorolla modem either. Any ideas? what kind of setup is this? all I'd like to do is plug in my wireless router so I can roam around the house and also access the internet.

  Read the article

• Authenticating Active Directory Users to Mac OS X Mavericks Server L2TP VPN Service

  - by dean

  We have a Windows Server 2012 Active Directory Infrastructure that consists of two domain controllers. Bound to the Active Directory Domain is a Mac OS X Mavericks Server 10.9.3. The server runs Profile Manager and VPN Services. My Active Directory users are able to authenticate to the Profile Manager, but not the VPN. I have found several threads on other forums of other users reporting similar issues, here is just one of many references: https://discussions.apple.com/thread/5174619 It appears as though the issue is related to a CHAP authentication failure. Can anyone suggest what next troubleshooting steps I might take? Is there a way to liberalize the authentication mechanism to include MSCHAP? Here is an excerpt of the transaction from the logs. Please note the domain has been changed to example.com. Jun 6 15:25:03 profile-manager.example.com vpnd[10317]: Incoming call... Address given to client = 192.168.55.217 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: publish_entry SCDSet() failed: Success! Jun 6 15:25:03 --- last message repeated 2 times --- Jun 6 15:25:03 profile-manager.example.com pppd[10677]: pppd 2.4.2 (Apple version 727.90.1) started by root, uid 0 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: L2TP incoming call in progress from '108.46.112.181'... Jun 6 15:25:03 profile-manager.example.com racoon[257]: pfkey DELETE received: ESP 192.168.55.12[4500]->108.46.112.181[4500] spi=25137226(0x17f904a) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP connection established. Jun 6 15:25:04 profile-manager kernel[0]: ppp0: is now delegating en0 (type 0x6, family 2, sub-family 0) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connect: ppp0 <--> socket[34:18] Jun 6 15:25:04 profile-manager.example.com pppd[10677]: CHAP peer authentication failed for alex Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connection terminated. Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnecting... Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnected Jun 6 15:25:04 profile-manager.example.com vpnd[10317]: --> Client with address = 192.168.55.217 has hung up

  Read the article

• How to balance the root domain using NS records?

  - by Patrick McCurley

  I have two load balancers that balance incoming traffic across multiple data centers. These work fine. I can test them out by doing an 'nslookup mydomain.com xIP' I have now taken out DNS services with DYN.com to allow me to manage the DNS Zone file so that typing mydomain.com will ask my load balancers what the IP address is to resolve. Step 1 : the NS record for www. I set up A records (glue) for ns1 & ns2, then the corresponding NS record to delegate the DNS lookup to the balancers instead of DYN.com's nameservers. ns1.mydomain.com A [ip address of load balancer 1] ns2.mydomain.com A [ip address of load balancer 1] www.mydomain.com NS ns1.mydomain.com www.mydomain.com NS ns2.mydomain.com All is well - when I type www.mydomain.com, the requests get delegated to my load balancers who provide the IP address of the endpoint and the connect is made successfully. Step 2 : the NS record for root. This is where I run into problems. I need customers to be able to type 'mydomain.com' (without the www) and ALSO get delegated to the load balancers for the IP address. However - of the research I have done, and through the DYN control panel, it seems to be not allowed to provide an NS record for the root - as this overrides the default NS servers. How can i delegate both the root, and the www. to my load balancers?

  Read the article

• Dual Monitor support rdp 7 to win 7 on esxi

  - by rphilli5

  I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

  Read the article

• Sender's Sendmail says "stat=Sent" but recipent doesn't receive the message

  - by user44774

  Guys, I am trying to figure out why sendmail is saying that it sends out an email but I actually never get it. This is from the logs when the email is being sent out: I have replaced the email address with some fake address and I have also replaced the name of the server with a fake hostname. The most significant point of this information from the logs is that it shows that the "Message was accepted for delivery". Do you guys have any suggestions as to why it seems like the message goes out but I never get the actual email? Jun 2 14:34:40 server sendmail[9668]: o52IYeSi009668: --- 250 2.0.0 o52IYeSi009668 Message accepted for delivery Jun 2 14:34:40 server sendmail[9667]: o52IYe9I009667: [email protected], ctladdr=rick (500/500), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30058, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o52IYeSi009668 Message accepted for delivery) Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: <-- QUIT Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: --- 221 2.0.0 server.server.com closing connection Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: SMTP outgoing connect on [192.168.1.9] Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: to=<[email protected]>, ctladdr=<[email protected]> (500/500), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120368, relay=mailhost.worldnet.att.net. [207.115.11.17], dsn=5.1.1, stat=User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYeSi009668: o52IYgSi009670: DSN: User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYgSi009670: to=<[email protected]>, **delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31625, dsn=2.0.0,** ***stat=Sent*****

  Read the article

• Installing MySQL 5.1 on OS X 10.7 Lion

  - by xisal

  I am trying to install MySQL 5.1. I am on Lion, and when I remove all files associated with MySQL on my machine it still tells me that I have a newer version installed when I try to install it from the DMG file. Has anyone successfully installed MySQL 5.1 on Lion? I found a solution using Homebrew: Completely remove MySQL from your system (just in case) sudo rm /usr/local/mysql sudo rm -rf /usr/local/mysql* sudo rm -rf /Library/StartupItems/MySQLCOM sudo rm -rf /Library/PreferencePanes/My* vim /etc/hostconfig and removed the line MYSQLCOM=-YES- rm -rf ~/Library/PreferencePanes/My* sudo rm -rf /Library/Receipts/mysql* sudo rm -rf /Library/Receipts/MySQL* sudo rm -rf /var/db/receipts/com.mysql.* Source:http://stackoverflow.com/questions/1436425/how-do-you-uninstall-mysql-from-mac-os-x Install homebrew /usr/bin/ruby -e "$(curl -fsSL https://raw.github.com/gist/323731)" Source: https://github.com/mxcl/homebrew/wiki/installation Install MySQL 5.1 via brew brew install mysql51 if that doesn't work, do this: brew install https://raw.github.com/adamv/homebrew-alt/master/versions/mysql51.rb Source: http://stackoverflow.com/questions/4359131/brew-install-mysql-on-mac-os/6399627#6399627 Make MySQL Work Create mysql.sock file touch /tmp/mysql.sock Install MySQL default tables /usr/local/Cellar/mysql51/5.1.58/bin/mysql_install_db ...or your path Source: http://stackoverflow.com/questions/4788381/getting-cant-connect-through-socket-tmp-mysql-when-installing-mysql-on-ma/5140849#5140849

  Read the article

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• Godaddy domain and Bluehost web hosting

  - by Digital site

  I have a domain from Godaddy and web hosting at Bluehost. I want to make this work as some people say no need to transfer the domain from Godaddy to Bluehost. I was trying to find out how to get this work out by adding name servers for Bluehost ns1.bluehost.com ns2.bluehost.com at Godaddy. This works fine, but not sure if 100% OK yet. The reason why I say that is when I type in my address name on any browser this way: mydomain.com it doesn't work. Instead I get an error message stating that this server is not found or couldn't connect to it... However, when I write the domain name and include the www. prefix it works fine... The other problem is when I search in google or yahoo, the domain shows like this: mydomain.com , which is not really good because my clients think my site is down because of the error message, and most new people don't know if they have to add www. to the domain to work. I just want to make at least the domain works like this: mydomain.com

  Read the article

• Apache Virtual host not recognized

  - by Bozho

  I've been using one server, then I reinstalled everything on another server, and the mod_jk stopped working. Here is the situation: apache 2.0 sitting "in front" mod_jk used to connect to the apache to tomcat tomcat 6.0.26 used to server the actual requests I followed this tutorial. The result is: accessing http://mysite.com opens the index.html in /var/www/ accessing http://mysite.com:8080/ works OK the logs at /var/logs/apache2 show everything is OK: [Mon Mar 29 22:01:53.310 2010] [28349:3075389184] [info] init_jk::mod_jk.c (2830): mod_jk/1.2.26 initialized [Mon Mar 29 22:01:53 2010] [warn] No JkShmFile defined in httpd.conf. Using default /var/log/apache2/jk-runtime-status [Mon Mar 29 22:01:53 2010] [notice] Apache/2.2.9 (Debian) mod_jk/1.2.26 configured -- resuming normal operations I compared the server.xml, jk.conf, sites-enabled/mysite from the new server to those from the old one and they are identical. The domain name is the same (I updated the DNS record today, and it has refreshed successfully) So the question is, what can go wrong? Is there another place where problems would be logged, if such occur? Update What I can be almost certain of is that the virtual host is not recognized. It is always forwarded to the default virtual host. So, how to make sure the virtual host is recognized and working?

  Read the article

• Copying symbolic links and filenames with special characters to NAS

  - by Mr E

  I have a new Western Digital My Book Live NAS. I am trying to copy files from an old drive to the NAS. I'm using Ubuntu 12.04 and I've mounted the drive by browsing the network in Nautilus and choosing a shared folder configured on the NAS. The shared folder is then automatically mounted at .gvfs/files on mybooklive. There are two problems so far: File names and directory names containing certain characters (e.g. : or |). Attempting to copy these results in the error message: cp: cannot stat `/path/to/destination.filename': Invalid argument Symbolic links. In Nautilus I get the error message: Symlinks not supported by backend My questions are: Can I connect to the NAS or configure the NAS so that I can copy my files without this problem? (In case it matters, I don't need Windows compatibility.) If not, what can I do to identify all the problem files? Can I do anything to automatically fix my filenames Please let me know if any of this needs clarification. I'm not too familiar with all of this so I may have left out some useful information.

  Read the article

< Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >