Search Results

Search found 18341 results on 734 pages for 'neural network'.

Page 492/734 | < Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >

• Question regarding an NAS server and remote users

  - by JB

  I have a client that requires a massive amount of storage space but: Doesn't want to spend very much money Needs remote users (across the country) to be able to pull data from it and store to it, as well. Can this be done with an NAS Server such as the Western Digital Sharespace Network Storage System? I do not believe the client wants to spend over $1400 and HP is offering 8TB for $1299. Also, if anyone has any other ideas besides using NAS, please let me know. Thanks in advance for any help.

  Read the article

• Ricoh Aficio 1515ps - How can I get the scanner to scan? (printing works)

  - by nutty about natty

  For similar screenshots and story, see: How to define my Samsung SCX3200 multifunction printer? and for a possible solution: How can I get an Epson TX560WD scanner working? Thanks! Edit n°1 installed xsane (via Ubuntu Software Center), launched it and get the following: Clicking on "Help" yields: I tried 4) man sane-dll which yields No manual entry for sane-dll I uninstalled "Simple Scan": didn't help. I tried 3) but aborted due to unsettling warning ;) wasn't that brave (or desperate). Maybe it's due to 1) and I'm stuck with it? Is it really not possible that a driver for either Windoze or Mac OS would also support scanning via Ubuntu? Edit n°2 Resorted to Windows XP and the Network TWAIN Driver ScanRouter or the "lite" version (which I found elsewhere) might also work (under Linux??); but it's more than I need. Thought about WINE, but also that seems to rely on SANE... So still no luck with this device's scanning capabilities with Linux (but good enough (via xp) for my purposes)...

  Read the article

• iDrac6 Email Alert Problem

  - by theotherreceive

  I'm trying to setup the email alerts on the iDrac6 Express on an R610, but when i run the test it just says "Sending Failed". Platform Event Filter Alerts are enabled. The network setup is: 192.168.1.22/255.255.255.0 Gateway: 192.168.1.1 DNS: 192.168.1.1 SMTP: 192.168.1.1 Exim is listening 192.168.1.1 and is set to allow mail on 192.168/16. There's nothing in the exim logs about connections from the drac. Is there a way to get the drac to give more information about why it's sending failed?

  Read the article

• Hyper-Threading and Dual-Core, What's the Difference?

  - by Josh Stodola

  In a conversation with the network administator, I mentioned that my machine was a dual-core. He told me it was not. I brought up the task manager, went to the perfomance tab, and showed him that there are two separate CPU usage graphs. I have a quad-core machine at home and it has four graphs. He told there were two graphs on this particular machine because of hyper-threading. I used to have a hyper-thread pentium 4 processor back in the day, but I never fully understood what it meant. So what is the difference between hyper threading and dual-core? And how do you tell which one you have?

  Read the article

• What's the likely culprit in email delay?

  - by Kiki

  If anyone can shed light or point me to a tutorial, I'd appreciate it. We are a tiny company and have experienced occasional delays in receiving email sent between staff members. We are in separate cities but all in the same state; our webhost/email ISP is across the country from us. If it matters, we're on Macs and most of use Entourage. Our email configurations are POP server: companyname.com and SMTP: smtp.companyname.com (When we used our DSL providers for SMTP we had unreliable service) Our ISP says they're not seeing delays related to their equipment and the problem is elsewhere in the network. A co-worker believes that the delays are with the ISP. Is there a good way to figure this out?

  Read the article

• What could prevent one Amazon EC2 instance from pinging another instance's Private IP?

  - by ks78

  I have multiple Amazon EC2 instances which need to communicate using private IPs. However, so far I've been unable to ping one instance's private IP from another instance. I can ping external addresses, such as their Elastic IPs and other sites (yahoo, google, etc), so it seems there's nothing wrong with the instances' network configuration. Also, they are all in the same zone, so that shouldn't be an issue. Does anyone have any idea what I could be doing wrong? Could this related to the Security Group settings?

  Read the article

• How to Grant IIS 7.5 access to a certificate in certificate store?

  - by thames

  In Windows 2003 it was simple to do and one could use the winhttpcertcfg.exe (download) to give "NETWORK SERVICE" account access to a certificate. I'm now using Windows Server 2008 R2 with IIS 7.5 and I am unable to find where and how to set permissions access permissions to a certificate in the certificate store. This Post showed how to do it in Vista and that winhttpcertcfg features were added into the certificates mmc however it doesn't seem to work with imported certificates or doesn't work anymore on Server 2008 R2. So does anyone have any idea on how give IIS 7.5 the correct permissions to read a certificate from the certificate store? And also what account from IIS 7.5 that needs the permission.

  Read the article

• Configuring WPA2-Enterprise with Freeradius

  - by Vincent O.

  I'm trying to set up an authenticated wifi network with Freeradius. I've managed to get things working using self-signed certs etc. The problem is Windows clients need to uncheck the "Automatically use my windows logon name and password [etc.]" option in the MSCHAPv2 settings. When I connect to my local university with Eduroam, it automatically asks for a username and password instead of sending windows login credentials. How did the sysadmins accomplish this? Is it some kind of RADIUS Attribute that gets sent back?

  Read the article

• How to setup a host as a sendmail relay for particular IP subnet

  - by Abhinav

  Hi, By default, sendmail (I have version 8.13 on an RHEL4) allows only local mails. I wanted to allow mails from a particular network to be relayed via the system, so I did the following based on suggestions from various places : /etc/mail/access : Added the subnet and the domain 8.37 RELAY mydomain.com RELAY (I assume this is the originating email's domain) This alone did not work, so I added the following to sendmail.mc FEATURE(access_db)dbl Now, the problem is that it is allowing access from other domains as well. To test it out, I removed 8.37 RELAY from the access, and changed the email from field to [email protected] However, I still receive the mail. What is the correct way to configure this, so that only mails from a particular subnet are relayed ?

  Read the article

• Windows NT workstation on AD domain

  - by Tom

  We run a Windows NT workstation connected to special manufacturing equipment, that everyone is deathly afraid to touch. It has custom software and special cards inside of the machine, making a rebuild impossible. The problem is, we are migrating to an AD domain from an NT domain, and this workstation stills needs access to storage on the network (AD computers). How should I go about doing this, after we get rid of our NT Domain controller? Upgrading to 2000 is not an option (so says management). I know, I know, if it dies we are in trouble. But that's managements choice, we just need to get rid of this NT domain.

  Read the article

• Remote desktop connection

  - by mmh

  My work computer is running on Windows 7 Ultimate, and my home laptop is running on Windows 7 Home Premium. I want to connect my work computer from my home laptop, but whenever I try to do it gives me an error message saying: Remote desktop can't connect to the computer for one of the following reasons 1.Remote access to the server is not enabled. 2.The remote computer is turn off. 3.The remote computer is not available in the network. But when I tried to connect from my colleague's desktop I can connect to my computer. Please help me. I need to connect to my work computer from home.

  Read the article

• Is this information about me as a programmer concise and good enough?

  - by Nick Rosencrantz

  I not only want you to review my resume but please tell me what you think Google means when they answered me: "We don't look at personal letters and we like your resume and we can recommend you internally but we need measurable experience. What is meant with "measurable" here? Do they mean like O(1) compared to O(n), selling an entire company, grades or what? This is what I sent: Curriculum vitae Nick Rosencrantz Competence: System development, web development Technical competence: Java, Javascript, HTML, XML, CSS, AJAX, PHP, SQL, Python Employments: 2012- Mobile Innovation AB System Developer IT consultant (Java programmer) 2011-2012 Bnano International Ltd System Developer Python programming in Google App Engine 2008-2009 Sweden Island AB System Developer Programming C++ and Java EE components 2003-2007 Studies Stockholm School of Economics During studies worked as network technician at Effnet AB 2000-2002 Jadestone AB System Developer System development in Java/J2EE. In 2001: KTH, Assistant. Teaching application server programming in Java Enterprise + weblogic + Informix. 1999-2000 Studies KTH 1996-1998 Spray.se System development, Researcher 1995-1995 Finance broker Backoffice work with financial instruments 1993-1994 Computer & Audio-Technical Systems AB Programming, sommer job Education/Courses: Stockholm School of Economics, Master of Science diploma, KTH, Computer Science undergraduate studies Languages Swedish, English, also some German and French Born 1973, Swedish citizen I also have a project-based CS which is several pages long but the above is about what I was aiming for in the beginning when I was looking for a job, now I have employment as an IT consultant in central Stockholm and I want to make my resume concise and also know what Google meant with their answer (It was a Swedish Google employee that via linkedin recruited from my Stockholm School of Economics groups since that is a small elite economics school where I took my M.Sc. and KTH is one of the largest universities in northern Europe so I sent her a link with my CV and she said she could promote me internally if I added "measurable experience" and I've been thinking for weeks what that may mean?

  Read the article

• accessing a web server from the LAN and WAN

  - by jessh

  My router does not support loopback. In order to view a webpage on my server, I either have to type in the local ip (192.168.1.201), or be on another network. What are my options for making this easier? Here are some possible things: Route all web traffic through an external proxy (seems to be overkill) Run my own DNS server (where to start?!) Buy a new router that supports loopback. Surely there is another way that I can use my laptop on the LAN and the WAN by typing in my domain more easily than these solutions.

  Read the article

• Looking for detailed Instructions on building a DIY NAS

  - by Kaushik Gopal

  I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

  Read the article

• Development Server Blocked Only from Home

  - by theonlylos

  Recently I've been having an issue with my CentOS 6 test server running Apache and Webmin running on port 10000 where when I try accessing any part of the server - SSH/FTP and even my domains (I have two - both keep getting timeout errors) when I try accessing from any computer on my home network. However when I access via tethering or via my office networks everything loads fine. While the firewall is the first issue at mind, my router never was set to block any special ports, and even after adding port 10000 as a specific exception I'm having no luck. Also, I doubt this is an IP blacklisting issue because I have websites on other servers using CloudFlare for security and I haven't gotten any warnings. Any assistance is greatly apprecaiated. UPDATE: Just some extra details about the issue: My ISP to my knowledge only blocks off ports 25 and 80 for residential users to prevent them from running web servers - however this issue has only come up a day or two ago, before that I was using the server successfully for months. Also the server is not physically located in any of my workspaces - it's a VPS housed in a datacenter

  Read the article

• PFSENSE and IPV6 , direct connect rules

  - by Bgnt44

  My question is about pfsense configuration for ipv6 In theory Ipv6 are fully routable even in a LAN For stating point i ve Using this tutorial : http://doc.pfsense.org/index.php/Using_IPv6_on_2.1_with_a_Tunnel_Broker So my Lan network has ipv4 connection and ipv6 I would like to be able to access my LAN machines by their IPV6 i'm confused with firewall rules which i need to set to be able to do that Even if i set all interfaces to pass all packets, i'm not able to directly access any machine by their IPV6 Did i miss something ? Edit : Ok i found that it work now, think it has always work but my isp seems to support ipv6 sometimes and sometimes not ... weird

  Read the article

• Domain connection shows as "unauthenticated"

  - by gareth89

  I have seen various different questions for this problem floating around but either the circumstances arent the same or the solution doesnt work so thought i would post it to see if anybody has any suggestions. Various domain PCs and laptops appear to randomly give the connection name of "lewis.local 2(Unauthenticated)" - lewis.local being our domain - and provides an exclamation mark where the network type logo is normally shown. This also appears to happen every time connecting via vpn. Our setup is: 2 servers both running windows server 2003 R2 (x32) main server has AD, DNS and DHCP installed IPv4 on approx 30 client machines (some wired, some wireless) If anybody has any thoughts on solutions i would appreciate it. I have tried removing all but AD server roles, resetting all of the systems and nothing. It doesnt prevent anything from working just like a domain connection most of the time however it is getting fustrating! Also dont know if it could have anything to do with it but the DHCP server seems to have quite a long lead time on issuing the IP address to the client.

  Read the article

• OSSEC agent behind NAT

  - by Eric

  I am working on an OSSEC deployment where I will have multiple agents behind 1 public IP. Below is an example of the setup Private Network OSSEC-Agent1 (192.168.1.10) OSSEC-Agent2 (192.168.50.33) OSSEC-Agent3 (10.10.10.1) Those IPs NAT to 1 public IP (1.1.1.1) Then 1.1.1.1 talks to the public OSSEC server on 2.2.2.2 I've read some OSSEC documentation talking about NAT here, but it doesn't tell me exactly what I need to know. Their example is using an entire /24 subnet and mine will mainly have multiple agents to only 1 public IP. With the setup so far, I brought Agent1 online fine and it is communicating to the OSSEC server. However Agent2 continues to fail trying to connect to 2.2.2.2. Even though when I added the key, I had the correct name for it, so I know it talked to the portal at least once for that information. I'm assuming it's just getting confused with the multiple keys to 1 public IP. I basically want to know if this is possible and/or if I'm just overlooking something simple. Any help would be greatly appreciated.

  Read the article

• How to Find Out Which Devices Are Supported By Solaris 11

  - by rickramsey

  Image of monks gathering on the steps of the main hall in the Tashilhunpo Monastery is courtesy of Alison Whitear Travel Photography. In his update of Brian Leonard's original Taking Your First Steps With Oracle Solaris, Glynn Foster walks you through the most basic steps required to get a version of Oracle Solaris 11 operational: Installing Solaris (VirtualBox, bare metal, or multi-boot) Managing users (root role, sudo command) Managing services with SMF (svcs and svcadm) Connecting to the network (with SMF or manually via dladm and ipadm) Figuring out the directory structure Updating software (with the IPS GUI or the pkg command) Managing package repositories Creating and managing additional boot environments One of the things you'll have to consider as you install Solaris 11 on an x86 system is whether Solaris has the proper drivers for the devices on your system. In the section titled "Installing On Bare Metal as a Standalone System," Glynn shows you how to use the Device Driver utility that's included with the Graphical Installer. However, if you want to get that information before you start installing Solaris 11 on your x86 system, you can consult the x86 Device List that's part of the Oracle Solaris Hardware Compatibility List (HCL). Here's how: Open the Device List. Scroll down to the table. Open the "Select Release" pull-down menu and pick "Solaris 11 11/11." Move over to the "Select Device Type" pull-down menu, and pick the device type. Or "All." The table will list all the devices of that type that are supported by Solaris 11, including PCI ID and vendor. In the coming days the Solaris Hardware Compatibility List will be updated with more Solaris 11 content. Stay tuned. - Rick Ramsey Website Newsletter Facebook Twitter

  Read the article

• maemo - n900 - SIP call quality

  - by Walter White

  Hi all, I have been using SIP / VoIP on my n900 to make calls and my problem is after about 15 minutes of talk time, more recently 18 minutes exactly, my connection dies and I can no longer hear them or them me. I have tested this with various VoIP providers to confirm that it is not specific to any one provider, but instead my phone. I also have tested this on my laptop. I sent my phone to be tested at some place that tests hardware and no problems were found with the hardware. What can I do to rectify the 15 minute call barrier with SIP on my phone? The other problem I have too is that for the wireless broadband to start working again, I need to restart the phone, it appears the network driver gets overloaded. The one thing that appears to work fine is making cellular calls. I have yet to have call quality drop off after 15 minutes over a cellular connection. Thanks, Walter

  Read the article

• How to send mass email and not get treated as spam

  - by MonsterMMORPG

  I am the owner of http://www.monstermmorpg.com which is a free to play browser based monster role playing game. I have a very important announcement to send my above 300k members. I already have email sending software but they drop to the spam. So i want to improve my chances of dropping inbox. I am going to give you all details. Alright my domain registrar is : http://www.godaddy.com/ My hosting company is : http://www.leaseweb.com/en This is my setting at leaseweb: This is my DNS settings at Godaddy: This is how I send emails: MailMessage mail = new MailMessage(); mail.To.Add(EmailAdress); mail.From = new MailAddress("MonsterMMORPG NoReplay <[email protected]>"); mail.Subject = "Title Of Mail"; string Body = "Body Of Mail"; mail.Body = Body; mail.IsBodyHtml = true; SmtpClient smtp = new SmtpClient(); smtp.DeliveryMethod = SmtpDeliveryMethod.Network; smtp.UseDefaultCredentials = true; smtp.Host = "85.17.154.139"; smtp.Port = 25; smtp.Send(mail); Thanks for every kind of answer. I did not make any special setting at SMTP:

  Read the article

• Turnkeylinux lampp guest doesn't have internet connection

  - by dave08

  I've set up a turnkeylinux lampp server in virtualbox with two network bridged connections, one for when I'm plugged in to my router, and one for when I'm using a wireless connection. This allowed me to pull up the turnkey control panel on the host machine's browser, but when I try going into the command prompt in the guest and run an apt-get update, it doesn't seem to have an internet connection, even though it seems to have a connection with the host. What could be wrong? Thank you very much in advance for any answers...!

  Read the article

• Connection to SQL Server 2008 R2 Database Server is SLOW

  - by AbeP

  The database server is a VM running SQL Server 2008 R2 on top of Windows Server 2012, 24GB RAM allocated and 2TB of disk space. Overall, the database connections are very slow and one thing that stands out is that the connection to the database server via SSMS takes 5-10 seconds. On other much less powerful servers, it takes 1-2 seconds. The VM is technically way more powerful than other machines, but the connection to the server is too slow. So, my guess is the issue is network related, but any clues on where I should be looking? Thanks!

  Read the article

• Add multiple @groups to valid users

  - by skids89

  In smb.conf I have the line valid users = @Staff @Directors Is this a valid syntax to add two groups to the valid users line? It does not seem to work right on our xp pro clients. If not which of the following is the proper way (if any) to make two groups valid users of this network drive? Which is proper for windows clients? valid users = +Staff +Directors Or do I need to use the & valid users = &Staff &Directors Or some combo of the two? valid users = &+Staff &+Directors valid users = +&Staff +&Directors

  Read the article

• How can I edit local security policy from a batch file?

  - by Stephen Jennings

  I am trying to write a utility as a batch file that, among other things, adds a user to the "Deny logon locally" local security policy. This batch file will be used on hundreds of independent computers (not on a domain and aren't even on the same network). I assumed one of the following were my options, but perhaps there's one I haven't thought of. A command line utility similar to net.exe which can modify local security policy. A VBScript sample to do the same. Write my own using some WMI or Win32 calls. I'd rather not do this one if I don't have to.

  Read the article

< Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >