Search Results

Search found 28620 results on 1145 pages for 'ubuntu newb'.

Page 494/1145 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

• Using Linux as guest on vmware and sharing connection with windows vista

  - by mike

  I been trying for weeks with vmwware player, now d/l vmwware work station 7, Have a laptop with one built in modem and a usb modem I bought, It works great switching it over from host to use in ubuntu to connect to the net, now when I use that modem from the host to connect online I have no trouble getting ubuntu to share the internet connection, But tried with NAT bridge host and all to get it to work from ubuntu to share the internet connection to windows vista, the host, I know it should work if it works the other way around, I tried setting up my wlan0 eht0 and eth1 to the correct IP can get both systems to notice each other by name and ip, but cant get them to share the connection from guest to host, I've tried iptables and all as well, Can someone please help me out with this? I am sure It is something something I'm over looking, Thanks in advance

  Read the article

• How do I know if my serial adapter card is working?

  - by Ingram

  I just installed a 2 port serial adapter in my Ubuntu 10.10 system, then I tried following this tutorial that I used on my old system to connect to a cisco router (my old system had an onboard serial adapter, and the tutorial worked just fine). I can't get my system to connect to the cisco router, so I'm wondering if the card even works in Ubuntu. How can I tell if the card actually works with Ubuntu? #dmesg | grep tty [ 0.000000] console [tty0] enabled [ 0.358667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.358994] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.359128] ttyS1: detected caps 00000700 should be 00000100 [ 0.359132] 0000:03:00.0: ttyS1 at MMIO 0xfeafd000 (irq = 16) is a 16C950/954 [ 0.359191] ttyS2: detected caps 00000700 should be 00000100 [ 0.359195] 0000:03:00.0: ttyS2 at MMIO 0xfeafd200 (irq = 16) is a 16C950/954

  Read the article

• Will grub overwrite EasyBCD entry if I already have Windows 7 and Windows XP installed?

  - by Sachin

  Installing Ubuntu on EEE PC which already has Windows 7 and Windows XP in dual boot using Easy BCD I have an ASUS EEE PC 1015PEM with Windows 7 starter and Windows XP in dual boot configuration on separate partitions. Now I want to replace my Windows XP with Ubuntu 11. Earlier after installing XP on my system it failed to boot in Windows 7, which I restored easily using EasyBCD. If I install Ubuntu 11 will I be able to boot my Windows 7 also? Will grub overwrite the EasyBCD entry for XP?

  Read the article

• Intel Atom D425 Problems

  - by Nico

  I have recently bought an Intel Atom D425 mini itx board with OCZ 30 Gig SSD and 1 Gig DDR3 ram. I have installed Ubuntu 10.04 and Crunchbang Statler ok; works fine in both. I tried to install Xubuntu 12.04, Ubuntu 12.04, and Mint 13 Mate. All of those 3 start up, but as soon as you get to install it all goes wrong and the monitor says input not supported. Is it an Intel Atom D425 problem, an Ubuntu problem, or something else? All help would be much appreciated Regards Nico

  Read the article

• How do I stop that launcher from popping up when mouse goes to the left edge?

  - by Michael

  This is what it says on the help.ubuntu.com website, but when i go to system settings, it does not have a Launcher & Menus option. I wish I could revert back to the old Ubuntu, I hate this launcher. Does any know a fix plz? "Stop the launcher from showing when I point to the left side of the screen The launcher unhides when you move your mouse or touchpad pointer to the left side of the screen. If you prefer, you can tell Unity to only show the launcher when you click the top left Ubuntu button instead. Click the icon at the very right of the top bar and select System Settings. In the Personal section, click Launcher & Menus. Choose Touches the top left corner of the screen"

  Read the article

• An "Invoke Update Manager to update everything and shutdown" script after idle for x minutes?

  - by unknownthreat

  I have Ubuntu 10.10 installed on a machine for my parents. The thing is they never request updates from Update Manager even the manager itself prompted them so. Moreover, when they are done with whatever they are doing on Ubuntu, they always leave the computer on. And I always have to come back and shut the machine down. Sometimes, the computer even sit idle for hours. So I want to know whether this is possible in Ubuntu. I am thinking of a script that will be activated after the machine is idle for x minutes. When x minutes have elapsed, Update Manager will automatically update everything listed. (I recall that you need the admin password for this, so is there a workaround?) After all the updates are done, the machine will automatically shutdown. Is this possible?

  Read the article

• "Unknown Filesystem" error without CDROM

  - by Utku Tarhan

  I've got a problem with Ubuntu 12.04 LTS. At first I ran mount command on terminal. Then I restarted my computer. After that, when my computer opened there is writing this: error: unknown filesystem grub rescue I searched commands and I found ls command. I tried it and I got this: (hd0) (hd0,msdos5) (hd0,msdos1) My computer's DVD driver is broken and I tried to boot Ubuntu on USB but it doesn't worked. My computer's specs: PC Name: HP Presario F780ET Processor: AMD Turion 64 X2 Mobile Technology TL-60 Ram: 2GB Ubuntu Version: 12.04 LTS

  Read the article

• Where is the Accessibility mouse click lock?

  - by user10133

  I've been a user of Linux on the desktop off and on again over the years. I very nearly switched my primary computer to Ubuntu prior to the release of Windows 7. There were a few, but significant issues at the time that prevented wholesale adoption, mostly tethering with my phone and lousy VPN Client. One key component I could count on was the Accessibility features. I have recently installed Ubuntu 10.10 and am considering giving it another try, but it appears Ubuntu has taken a leap backwards in that it no longer has a click lock feature for the mouse. Basically I need the ability to press and hold the left button to trigger a locking of the button so I can move the mouse by way of a trackpoint with my prosthesis. I absolutely require this feature and it is a deal breaker if it won't work. I've tried the Dwell keys but this is a chaotic control at best. I've never been able to manage a drag of any kind.

  Read the article

• redefine shortcuts for keys being set to default after reboot

  - by MYA

  i am using PHPStorm editor on Ubuntu 14.04. Everything is so smooth that I am loving the experience (especially the workspace experience is amazing) however this bug is giving me headache... some of the editor's short-cuts clash with default Ubuntu keys (Alt + Ctrl + Left,Right,Up or Down arrow keys). I have changed the default keys to (super + Left,Right,Up and Down arrow keys) so they don't collide with my editor but after the reboot, Ubuntu changes are somehow reverting to default. This keeps comming again and again. i am sure there is a way out so therefore need help with that...

  Read the article

• Dual monitor working incorrectly on a Dell XPS 8300 with an AMD Radeon HD 6450

  - by John

  I have been having trouble with Ubuntu on my Dell XPS 8300 (Actual image of the desktop). I have heard that the AMD Radeon HD 6450 has trouble with Ubuntu, and I believe that it is the source of the problem (though I am no expert by any means). When I boot the computer and choose to run Ubuntu, on a rare occasion both monitors (I have an AOC and a Samsung) will display their correct desktops, however most of the time, one of the desktops will be shifted away from its proper position and awkwardly positioned on the screen (showing the login box in the middle/right etc). If anyone has any advice on how to fix this, that would be greatly appreciated.

  Read the article

• Linuxubuntu1234 [closed]

  - by Richard

  Dobry den Pani a Panvé Linux Ubuntu lepsi nové tu jemno cely Linuxubuntu 13,5 pogram sytem. Ptam se ano nové sytem moc chrany Ubuntu bude s mobil se jemnuje Liubuntu phone 13,9. Moc libi tu pogram lepsi noviky Liubuntu phone budeš sam sysem pracovt lepé 2 stejne pro mobil i tablet. A má nine Mini notebooky, netbooky a PC pogramy velky pro Ubuntu lepsi internet pro anglicky psani prekada cesky. Ano cesky má clanek ale nine anglicky nerozumi clanek preklada cesky jako google má pogram lip cele svet preklada a ctu nerozumi a preklada cesky.

  Read the article

• Why is Lubuntu default desktop environment

  - by John

  So I just wanted to try things out on 14.04, so I did sudo apt-get install lxde sudo apt-get install lubuntu-desktop When I get to the greeter, it reads Lubuntu (Default) Lubuntu Netbook LXDE Openbox Ubuntu Why is Lubuntu default? I don't know if its because its the last thing I installed or if its because it is in alphabetical order. I'm tempted to test this theory by installing Xubuntu and see if it becomes default. I'd like it to read Ubuntu (Default) and have the Ubuntu splash instead. When I open lightdm.conf, there is no line "user-session" nor "greeter-session". They are missing. Is this normal and I have to add it manually?

  Read the article

• Kernel Panic Fatal Machine Check

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-(

  Read the article

• Confused with X.ORG version number

  - by caligula

  There is my trouble: I'm trying to install ATI drivers on my Dell Vostro 3350 laptop. On the AMD's site I followed steps to determine which driver should I use. After selecting what hardware I use I got a link to download amd-driver-installer-12-3-x86.x86_64.run and below was a description of that driver that it was compatible with X.Org version from 6.7 to 7.6. And I do not know what version of X.Org my Ubuntu uses. Cause after googling I found that version is 7.6 in Ubuntu 11.10. But after typing: X -version I got the output: X.Org X Server 1.10.4 Release Date: 2011-08-19 X Protocol Version 11, Revision 0 So what is the exact version of X.Org in Ubuntu 11.10 and how should one reliably determine it? Can anyone construe? Thanks.

  Read the article

• Menu bars are a basic light gray after installing graphics card driver. [closed]

  - by Jonathan

  Possible Duplicate: Desktop forgets theme? Hi, I've just installed Ubuntu 10.10 64-bit. It came up saying I could install 2 proprietary drivers, one for my WiFi adapter (which works perfectly) and one for my graphics card - a Sapphire AIT Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card. The driver is called ATI/AMD proprietary FGLRX graphics driver. Before installing this driver I was unable to have Extra Visual Effects in Appearances. However after installing (and restarting) the menu bars are now in a basic light gray mode, rather than the sleek Ubuntu black. - Although Extra Visual Effects does now work. I've tried rebooting, and I've had a look around in ATI "Catalyst Control Center" but nothing has worked so far. Does anybody know what this windows mode is, how to change it back to normal and why it's doing it in the first place? Below is a screenshot of my computer: (This is also the first time I've installed Ubuntu on my computer, and am keen for it to work.)

  Read the article

• Mouse wheel scrolls down, but not up?

  - by HDave

  I've set up a new machine with Ubuntu 12.04 (x64) and have notice that the mouse wheel scrolls down fine, but when I scroll up, it pages down! I've run xev and have verified that scroll up is registering as button 4 and scoll down is button 5. So everything there is fine. I think that button 4 is somehow mapped to page down instead of scroll up. Any idea how to fix? NOTE: I've read the Ubuntu instructions on how to use imwheel to change mouse button mappings, but it doesn't work on 12.04. See here: https://bugs.launchpad.net/ubuntu/+source/imwheel/+bug/1004812

  Read the article

• Wubi install: How do I increase swap size

  - by Diogenes Lantern

  I am trying to increase the swapfile size on my WUBI install. I followed the answer here: sudo su swapoff -a cd /host/ubuntu/disks/ mv swap.disk swap.disk.bak dd if=/dev/zero of=swap.disk bs=1024 count=2097152 mkswap swap.disk swapon -a free -m until I reached: mv swap.disk swap.disk.bak At which point I have got got the following: root@ubuntu:/host/ubuntu/disks# mv swap.disk swap.disk.bak mv: cannot move `swap.disk' to `swap.disk.bak': Operation not permitted My 256 M swap space is all used up. I would like to install a total of twice that. Is there a method of setting it which would not include guesswork on my part?

  Read the article

• No internet access since 12.04

  - by Roelof

  I have updated yesterday to Ubuntu 12.04 but can not access the Internet. It is an old PC without wireless. But the older Ubuntu I had installed up until now (11.??) worked perfectly. I'm not that familiar with Ubuntu, and I have been trying Google for some time know, but I cannot find the answer. I noticed that running nm-tool resulted in some things that don't sound right: Type: wired Driver: ne2k-pci state: unavailable Default: no Carrier: off Does anyone have a way to fix the connection?

  Read the article

• transparent home directory encryption

  - by user86458

  #1 I'm very new to the ubuntu home directory encryption or rather ecryptfs folder encryption. I read about the same within Dustin's blog & tried implementing it. Problem or query is my home directory is encrypted & has a www folder ... now when I reboot the system the decryption doesnt happen at startup/boot & apache is not able to find the files rather the folder www since it is not mounted ... in order to mount it I have to login .... is there a way by which an encrypted home / private folder can be mounted at boot without human intervention ? #2 I have installed ubuntu server 11.10 & had selected "encrypt home directory" when installing the same. With ubuntu things are working transparently even after reboot & without logging in. Kindly can anyone pls explain or guide on the same ?

  Read the article

• USB modem could not mount on 12.04

  - by maz

  I have a usb wimax modem. If I connect it at ubuntu 10.04 it has been detected and mounted as cd see here. From there I got that it is "iso96660" type and device location is /dev/sr1. But when I connect this usb modem in Ubuntu 12.04, it could not be mounted. So I have tried to find the file sr1 in this location /dev/ and could not found any-thing. But if disconnect and then re-connect the usb modem at this path /dev/, I saw a flickering of "sr1" named file for a certain time (1 sec) then it's dis-appear. Can anyone guide me to connect it step-by-step in Ubuntu 12.04?

  Read the article

• flashplugin installer works for firefox but not chromium-browser

  - by user829755

  I'm on Ubuntu precise (12.04.5 LTS) and I do have flashplugin-installer installed. When I click on flash videos in chromium-browser I get "An error occurred, please try again later". In firefox they display fine. I opened chrome://plugins to see if the flash plugin is installed and indeed it's not listed. Also http://www.codegeek.net/flash-version.php displays: "You do not have Flash player installed", while with firefox it says: You have Flash player 11.2.202 installed. Following some instructions on some ubuntu page I copied the plugin using sudo cp /usr/lib/flashplugin-installer/libflashplayer.so /usr/lib/chromium-browser/plugins/ and I started chromium using chromium-browser --enable-plugins but this didn't help. chrome://chrome/ says: Version 36.0.1985.125 Ubuntu 12.04 (283153). what else can I try?

  Read the article

• Radeon HD5670 hangs after login

  - by pKaresz

  Thanks in advance for your advices. I installed, Ubuntu 12.04 today, on my PC with a Radeon hd5670 graphics card. The first error I encountered, (just like the first time Unity came out - after witch I waited to try Ubuntu again until now) is, that it hanged after login at the desktop wallpaper, with only the mouse cursor. Well actually the first problem was with the live CD, but I managed to install it, using the install now, not the try now. Live CD has the same problem, as after install. So, after installing and getting the error, I searched of course before asking this:) I found this: Ubuntu hangs at purple screen The accepted answer there helped me to get to this. (note, that the below picture is a screen taken from a working desktop, and then erased the parts that don't show on mine.) Note that there is nothing at the top except the brown bar. No shutdown button, no nothing. The system hangs, I can't click on anything, I can only wiggle around with my mouse XD

  Read the article

• Can't mount data DVD using 12.04

  - by dash2

  I cannot mount a data DVD using Ubuntu 12.04. I can read the DVD using a different OS, so the DVD is not the problem. I can read other CDs using Ubuntu. The error I get is: $ sudo mount /dev/dvd /cdrom mount: no medium found on /dev/sr0 The relevant output from lshw is: *-cdrom description: DVD reader product: DVD/CDRW UJDA775 vendor: MATSHITA physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/sr0 version: CB03 capabilities: removable audio cd-r cd-rw dvd configuration: ansiversion=5 status=nodisc I have installed ubuntu-restricted-extras and run /usr/share/doc/libdvdread4/install-css.sh.

  Read the article

• DHCP Fails To Start

  - by user209138

  I just installed Ubuntu 12.0.4 on an HP 8560 laptop. I installed Fog version 29 and everything worked just fine except the DHCP3 package failed to start. When I run the install command it says DHCP3 is installed, but when I type in the following command to start DHCP (sudo /etc/init.d/DHCP3-server start it says the command is not found. Is there a different command for Ubuntu 12? I have been using Ubuntu 10 on my other fog servers and that command works fine.Thank you for your help.

  Read the article

• Grub errors during UEFI dual boot for Windows 8 (can't find command 'drivemap')

  - by luca-mastro

  I have got a newly bought ASUS N56V with Windows 8 preinstalled. I needed to install Ubuntu so i partitioned the disk and after having disabled the Secure Boot option from Windows 8 i successfully installed Ubuntu 12.10 from a Live USB. The problem is that if i try to access both to Windows 8 (loader) and Windows Recovery System (loader) from the GRUB menu, these two errors show: can't find command 'drivemap' and invalid EFI file path and it goes back to the grub menu. In conclusion I do not have access to my Windows 8 partition but can only use Ubuntu. How can I solve the problem? I am pretty new to the matter. Thank you!

  Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >