Search Results

Search found 26335 results on 1054 pages for 'external display'.

Page 495/1054 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

• No blocked ports on internal interface of ASA

  - by blsub6

  I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

  Read the article

• Trouble with backup on SBS2008

  - by MemLeak

  We have an SBS2008 installation, which has a backup task. It creates a backup twice a day onto external storage. This worked for a long time. But the backup can't be performed now. The last valid backup was before some Exchange updates, SBS Update Rollup 8 and SharePoint updates were installed. The only error in Event Logs is for VSS (the Volume Shadow Service), which I only have in German. Things I've done: restart the server chkdsk /r /f for all volumes restart the VSS service googling manual backup Nothing's helped. How can I set up the backup again?

  Read the article

• Exchange 2010 550 5.7.1 unable to relay

  - by isorfir

  I have a website application that needs to send email via our Exchange servers. It sends email internally fine, but when sending to an external address I get the 550 5.7.1 unable to relay error. I followed this guide to create a connector to allow relay. Unfortunately, all office email was trying to use that connector and was not being routed correctly. It also appeared as though it opened it up for spammers to use. This is obviously unacceptable and a secure method is needed.

  Read the article

• Smart backup software

  - by gisek

  I use a laptop on daily basis. As I have a lot of important data there it would be nice to do backups of some directories every day. Can you recommend a specific application that would take care of it? Maybe there is an app that would instantly commit changes I make in a directory on my laptop to the backup folder? The important thing is that I have some big files (a few GB's) that have some minor changes very often. I'm talking about VirtualBox disk images. It would be nice if the software could handle it smartly. Also notice that I'd like to store it on an external usb HDD, which sometimes isn't plugged in.

  Read the article

• Performance Bottleneck with Photoshop CS3 on XPSP3

  - by Doozer1979

  I have an intel core 2 4400, with 4GB of ram running on XP 32-BIT SP3. Photoshop CS3 becomes sluggish & unresponsive even after loading up small files, and this is with only Bridge open as well, plus McAffee AV. My photos are loaded in from a USB 2 external drive, and my c: drive is used only for programs and windows itself. Even with 4GB of RAM, i am seeing the pagefile increase to 1.6GB, whilst there appears to be 1.5GB of RAM free to use. I've defragged the drive, with defraggler, and after that the only file reported to be fragmented was the pagefile itself. Anyone have any ideas what i can do to improve/solve this?

  Read the article

• Is there a program that will show a tree of the differences in two file trees?

  - by Huckle

  In windows I manually back up from time to time by formatting my external drive and copying the contents of my data partition over. Inevitably there is a difference in the number and size of the files copied because of system files, etc. Is there a program that would diff two directories recursively and compile the differences into a nice GUI tree that I could peruse (preferably filter) to ensure that everything I want made it over to the drive? It should only show files that are not in both directories. (Also, please ignore the inadequacy of my backup solution)

  Read the article

• Using Windows Azure storage for backup

  - by Bruno

  I am currently looking at Windows Azure blobs as an option for backing up archive data. I want to be able to upload files from an external windows machine via the internet but I don't know enough about Windows Azure storage to make a decision. Some of the questions I have are How do I upload the files. Is there a client application, can I use robocopy? Would it be fast enough? i.e. Could I download or upload 1TB of data in a week? Is it secure? Hopefully someone smarter than me can help me :-)

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• How can I insert the quoted price of gold from kitco.com into my excel spreadsheet?

  - by Frank Computer

  kitco.com provides a realtime price quote for gold and other metals. I have a spreadsheet which makes calculations based on the price of gold and would like for this realtime value to automatically be updated on my excel sheet. I tried 'get external data' from a website but that didn't work. any ideas? EDIT ADDED: Kitco has a gadget called KCAST which displays realtime quotes on the Windows taskbar. I tried capturing those values from the taskbar but that didn't work either. Maybe if Kitco provided an API or feed, it could be done?

  Read the article

• Windows Search Indexing SSD

  - by user654628

  I just bought a new SSD (Vertex4 from OCZ, 256G) and installed Windows 8 with it on my laptop. I am not using an external hard drive to keep extra data (paging, temp files etc) because I am using a laptop and do not want to carry it around with me. My question is, if I disable Windows indexer (Windows Search service), does Windows still search files under the search (Windows 7 Start menu search/Metro UI Windows 8 search)? Since the indexer was meant to search for files by indexing them, does this mean that Windows will not search new files? Thanks in advance.

  Read the article

• Is there any chance that my data will get silently corrupted with a robocopy SMB network transfer?

  - by Archagon

  I'm setting up a NAS box for the first time. At the moment, I have most of my data backed up to a few local hard drives, and I intend to transfer all the data to my NAS over ethernet once the RAID array is setup. Since this is all happening over the network, I'm a bit worried about my data getting corrupted silently during transfer. From what I understand, data generally doesn't get corrupted without notice on local transfers because a checksum is performed at some point by the drive or the OS. (This could be totally wrong.) Does the same thing happen with SMB, or is it up to the transferrer to check the integrity of their data? And if it doesn't happen with SMB, is there a protocol that does ensure data integrity? I know that rsync can checksum a transfer, but I'm on Windows and I already have a robocopy configuration that I like. Will my data be safe or do I have to use an external checksum tool to make sure?

  Read the article

• MacBook Air with Bootcamp - How to partition?

  - by Andrew

  I want to buy a MacBook Air for my wife with a 128GB SSD. She has to use Windows 7 but I would like to keep OS X for myself to use somtimes. Using Bootcamp, is it feasible to install the following? Mac partition: 36GB with Mac OS X and Microsoft Office 2011 Word, Excel & Powerpoint and Skype. (minimal use) Windows partition: 92GB with Windows 7 professional and Microsoft Office 2010 Word, Excel & Powerpoint, and Skype (daily use) Media to be kept on SD card or external USB3 drive. (Note: Using Parrallels may save space, but my wife won't go for the user experience)

  Read the article

• Commands not working in Windows 7 32-bit command prompt

  - by Precious Tijesunimi

  I have an HP laptop with a Windows 7 32-bit Home Premium operating system. My command prompt doesn't run lots of commands like help, shutdown, ipconfig, ping, etc. I get a message like: 'help' is not recognized as an internal or external command, operable program or batch file. Only simple commands like cd and dir are working. I noticed that whenever I navigate to c:/windows/system32, the command works. But I need to run some important commands like java on a file that is on the desktop and not in the system32 folder. How can I fix this?

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• USB Hub powers down in sleep mode on Win 7 64

  - by Andy B

  This question has been asked before but not answered. I would like the USB hub to remain on in sleep so I can wake up the laptop from an external keyboard and mouse. I have set all the device drivers by unchecking allow this device to be powered down and disabled selective suspend in control panel but the hub still powers down. If I plug a keyboard or mouse directly in to the PC they remain powered and wake the computer its only when they are connected through the hub there is a problem. I have another PC running Win 7 32. If I set this up in exactly the same way the hub remains powered in sleep. Both PC's are Toshiba Satellites with multi-core celerons but one runs Win 7 32 the other Win 7 64. BIOS settings are the same. Any help would be appreciated even confirmation that this is a feature of Win 7 64.

  Read the article

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• Force ID of user created by apt-get

  - by Bart van Heukelom

  Context: I'm automatically installing postgresql-9.1 on an Ubuntu server with apt-get. This creates the required postgres user. The Postgres data is on an external volume that survives reinstalls. This data is obviously owned by the postgres user. The problem I'm having is that the ownership is not recorded under the name postgres, but under the UID that postgres had at creation time. When the server is reinstalled, postgres sometimes gets a different UID, and no longer owns the data directory, and thus does not work. Question: Can I force the UID of the user postgres created by apt-get to something fixed? Or is there another way to solve my problem? (As you may have deduced, this is on Amazon EC2 with the data on an EBS volume)

  Read the article

• What can I do to configure my SSH such that it pauses for a flaky connection?

  - by kfmfe04

  I run ssh from OSX to a Ubuntu box - under home WIFI, everything works perfectly. However, when I ssh from certain external networks, ssh may be working fine for a minute or two and then drop due to a flaky network (diagnosed by pinging 8.8.8.8). How can I set up ssh so that it simply waits/pauses rather than drop (when dropping, I have to setup my development environment from scratch - a big hassle). EDIT When I say a bad connection, I mean, for example, ping 8.8.8.8 will work fine for a while, and then fail for 40-50 pings, and then come back on again.

  Read the article

• Reverse proxy with SSL and IP passthrough?

  - by Paul

  Turns out that the IP of a much-needed new website is blocked from inside our organization's network for reasons that will take weeks to fix. In the meantime, could we set up a reverse proxy on an Internet-based server which will forward SSL traffic and perhaps client IPs to the external site? Load will be light. No need to terminate SSL on the proxy. We may be able to poison DNS so original URL can work. How do I learn if I need URL rewriting? Squid/apache/nginx/something else? Setup would be fastest on Win 2000, but other OSes are OK if that would help. Simple and quick are good since it's a temporary solution. Thanks for your thoughts!

  Read the article

• How Do I Delete Misnamed Tagged Directory Already Committed?

  - by Teno

  I'm new to using the SVN system and having hard time figuring out how to delete files uploaded mistakenly. What I've done: Committed the trunk folder with right clicking on "SVN Commit" Right clicked and choose "TortoiseSVN" - "Branch/Tag" In the section of "To path:" in the "Branch/Tag - Tortoise" window, I typed /*mydirectory*/tags/*1.0.11* where 1.0.11 was supposed to be 1.0.1.1 After realizing 1.0.11 was a mistake, to remove the directory, I right clicked on the 1.0.11 folder in Windows and selected "TortoiseSVN" - "Delete" It deleted the folder in Windows but does not delete the folder in the remote server. According to this page,http://stackoverflow.com/questions/2092344/how-do-i-delete-a-wrongly-tagged-directory-in-svn, a command can be used and I tried to type svn in the command prompt window but it gives svn is not recognized as an internal or external command. This should be a very basic question but I could not find relevant pages. Some pages suggest to use revert but I've already committed 1.0.1.1 so I'm afraid doing revert causes the newest one to be deleted. Thanks for your information.

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• Redirect traffic to local address so iOS speedtest app measures LAN speed

  - by ivan_sig

  I have mounted a Speedtest Mini server on a local LAMP, so I can test my LAN speeds effortlessly just by opening the URL with a Flash enabled web browser, the thing is, I want my iOS and Android devices to test with the LAN server too, not with the WAN, as I'm trying to measure LAN-Only performance. Is there a way so I can redirect the traffic intended to an specific external IP (The one of the real server) to my local server?. I know the servers IP as a short Wireshark analysis gave me the data, but still searching for a way to make that redirect. I have Jailbreak and root on my devices, so playing with system files is not a problem. I've tried mounting a proxy and making redirects by the hosts file and domain names, but it looks like Ookla's app relies on IP address only.

  Read the article

• Mysterious xyz.event files appearing

  - by Pekka

  I am getting mysterious .event files - always empty, created by me a few weeks ago - in several local project directories. They are all Subversion checkouts. They are always named after the directory they reside in, so a directory named pagination will contain a pagination.event file. Does anybody know what this is? Possibly important information: I am working on a Windows 7 Workstation I use NuSphere's PHP IDE (no updates recently) I use TortoiseSVN for version control I set up a Windows 7 backup job recently that ran once, I can' remember when exactly. The event files seem to turn up only in repositories There is no external access to those repositories

  Read the article

• How can I disable my laptop's built-in keyboard?

  - by sam

  I have a HP Compaq Presario C700 laptop with Windows 7 installed on it. My laptop's keyboard is not working properly; some keys never work and some keys will keep on pressing. I've formatted the OS but it didn't solve my problem. I bought an external USB keyboard and it works well. As some keys in the built-in keyboard activate themselves, I still couldn't work effectively. After searching Google I tried the following steps to disable the built-in keyboard: Disabled keyboard drivers: This didn't work because when the system reboots, the driver gets installed again automatically. Installed irrelevant driver for keyboard: This failed - I couldn't install the driver. After rebooting it installed the correct driver automatically. Can anyone help explain how I can temporarily uninstall my built-in keyboard? I don't want to remove it manually (removing the hardware cable).

  Read the article

• Problem with Ctrl key on a hp 2510p

  - by Ernelli

  I have a tricky problem with my corporate Compaq hp 2510p, the ctrl key is not working properly at all times. I belive that it is hooked in some filter chain that processes certain ctrl+[key] combinations which is very annoying. I would like some pointers on how to proceed when analysing what application/setup can can cause this kind of keyboard filtering to happen. Anyway some more background info: Ctrl works together with X, C, V. Both in editors and terminals (Ctrl-C, Z etc) but Ctrl-Shift-Esc and Ctrl-Alt-Del does not work. Very annoying so my only option for logging in us using HP's security app. Shift-Arrow works for selecting text, but not Ctrl-shift arrow to select word by word, but Ctrl-Arrow works when moving the caret word by word. Now the strange thing is that everything works ok with an external USB keyboard so it might be the driver, but still, google yields 0 when searching for the problem description. I have vm-ware player installed (but not running it), HP Protect Tools installed, if any of these could affect the keyboard driver.

  Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >