Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 496/1106 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

  • Why, when on Kubuntu I lose internet connection, am I unable to reconnect?

    - by Jonathan
    Using Kubuntu 11.10. Sony Vaio computer. Network controller: Intel Corporation WiFi Link 5100. If I connect to a wireless network, and the signal drops, then I am unable to connect to any network without a reboot. I can assure that the issue has nothing to do with the computer going to sleep, as I have experienced the above while using my computer continuously. Here is exactly what happens: Connect to network (at University, where the connection is not so great). The connection is broken There are three other possible networks available, but none of them can be connected to. I have tried off and on sometimes for hours. I am always able to reestablish a connection after a reboot. I can only think of two explanations. The first is that a temp file is corrupted when the internet connection is abruptly dropped. The second is that my computer actually corrupts something before the loss of internet connection, which causes the loss in signal, and inability to reconnect. However, I am not confident that my explanations are complete, nor do I have any idea how to test these things.

    Read the article

  • Can I run Ubuntu Live from a USB flash-drive without destroying the data on it?

    - by Lucian
    I already have a number of files on a flash drive (8 gb) that I would prefer to keep, but I would like to try Ubuntu even if merely for the aesthetics. I use Windows XP. I know that it's definitely possible to run Ubuntu from a bootable drive like my flash drive to try Ubuntu but I would much rather keep my files intact not only on my flash drive but also my hard drive, if that's possible. I also want to know if it's entirely possible that while running Ubuntu from the USB if I can switch back to Windows while my computer is still on. If I'm missing something, please let me know. I'm very grateful for any assistance in this matter.

    Read the article

  • Black bars around screen? Catalyst Control Center problem?

    - by Josh B
    I just newly install Ubuntu 12.04, and im running an HDMI cable from my computer to my ASUS monitor. Now in Windows 7, i did not have these black bar issues running at 1080p. But now in Ubuntu, i have these black bars. I installed the ATI Catalyst Control Center, and I went to go in to fix the scaling but it is grayed out. As you can see, even with the override box checked i still can not set the scaling. The monitor was set to a lower resolution to hopefully fix it but that did not work either. Does anyone know how to fix this? Thanks.

    Read the article

  • How can I have only two specific keyboard layouts in my system without 'us'?

    - by ??O?????
    I want only two keyboard layouts in my system: us altgr-intl (USA International (AltGr dead keys) ) and gr (Greece), so this is what I've selected in System ? Preferences ? Keyboard ? Layouts. However, every time I begin a new Gnome session (reboot, logout/login), the us keyboard layout is automatically inserted at the top of the list. I created a small script called fixlang that ensures the desirable result: layouts='[us altgr-intl,gr]' # tab between us and altgr key=/desktop/gnome/peripherals/keyboard/kbd/layouts active_layouts="$(gconftool -g $key)" if [ "$active_layouts" != "$layouts" -o "$1" == -f ] then gconftool -t l --list-type=str -s $key "$layouts" fi which I run on login. However, this is a kludge. How can I ensure that Gnome does not mess with my keyboard layout selection?

    Read the article

  • Mount an external drive at boot time only if it is plugged in.

    - by Jeremy
    I've got an entry for an external harddrive in my fstab: UUID="680C0FE30C0FAAE0" /jgdata ntfs noatime,rw But sometimes this drive isn't plugged in at boot time. This leaves me half way through a boot, with a prompt to "Continue Waiting, press S or press M" but no keypress has any affect at this stage (including ctrl-alt-delete, not even caps-lock). Short of writing a script to check the output of fdisk -l, how can I mount this drive at boot time only if it is present? It would be handy to have an fdisk entry for this drive, so I can just type mount /jgdata instead of needing a device name.

    Read the article

  • Doubts regarding the behaviour of 'autoremove' command and '--auto-remove' flag

    - by Jasper Loy
    After reading several man pages and forums, I thought that running 'apt-get autoremove' without any following argument removes all unused dependencies left on the system, while running 'apt-get autoremove xxx' removes xxx together with its unused dependencies. However I found this to be not true. Running 'apt-get autoremove xxx' not only removes xxx together with its unused dependencies, it also removes all other unused dependencies. So I tried to run 'apt-get remove --auto-remove xxx', thinking that this would remove only xxx and its unused dependencies. To my surprise, this also removed xxx, its unused dependencies and all other unused dependencies. Is this the intended behaviour of the commands or a bug? Is there any quick way to remove xxx and its unused dependencies without removing other unused dependencies?

    Read the article

  • How to reverse file ownership and permission settings

    - by pandisvezia
    I installed LAMP and WordPress on my system a week ago. Since I couldn't create Child Themes in WordPress and work with PHP folders for my other projects collocated in var/www without using Nautilus I wanted to solve the permissions issue. I hoped to bring a solution carrying out the commands on this page for my WordPress folder: http://wiki.apache.org/httpd/FileSystemPermissions. This allowed me to play with any file in the folder like creating and modifying .css files through WP Admin, etc. But after a restart I discovered that I can't change DNS settings of my network connections in the list anymore because it is asking me the root password and even though I enter the password it doesn't let me do the action giving "insufficient privileges" error. Can you help me correct the mistake I possibily made during the configuration and, maybe, configure again the permission and ownership settings for var/www/somefolder as it is adviced to be configured under general circumstances? Thanks in advance!

    Read the article

  • No se que hay que hacer :$ URGENTE!

    - by Meri
    Pues yo llevo muy poco tiempo con ununtu y nose que hay que hacer no se me inicia .. es decir me sale el menu grub ese y le doy al primero iniciar con linux pero me sale una rayita blanca parpadeando y asi horas y no se enciende y tengo que apagarle forzandolo de golpe y lo vuelvo a encender y le doy modo recuperacion y sale muchas cosas y al final not avaliable algo asi y se queda asi rato necesito ayuda.Intente muchas cosas de internet pero ninguna funciono si os sirve de informacion tengo un Acer Aspire 5630 tiene intel.

    Read the article

  • How to Use a PIN Instead of a Password in Windows 8

    - by Taylor Gibb
    Entering your full password on a touch screen device can really become a pain in the neck, luckily for us we can link a short 4 digit PIN to our user account and log in with that instead. Note: PIN codes are nowhere near as safe as using an alphanumeric password, however, they do still have a purpose when you don’t want to enter your 15 character password on a touch screen device. Creating a PIN Press the Win + I keyboard combination to bring up the Settings Charm, then click on the Change PC settings link. This will open up the Modern UI PC Settings app, where you can click on the Users section. On the right hand side you will see a Create a PIN button, click on it. Now you will need to verify that you are the owner of this user account by entering your password. Then you can choose a PIN, remember that it can only contain digits. Now when you get to the login screen you will have the option to use a PIN. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

    Read the article

  • How do I get an Canon Pixma MP150 to print?

    - by Radu Erdei
    I succesfully installed my Canon Pixma MP150 printer (and scanner) in Ubuntu 12.04, made it the default printer, but i cannot print anything. Watching the printing queue, i see that the printer receives my documents but just for a few seconds after which the queue gets empty without anything getting actually printed. I tried to print from large pdf's to quite tiny txt files. I reinstalled the printer from cups web-based interface (127.0.0.1:631) but again, no luck. Any ideea on the matter?

    Read the article

  • Ubuntu 12.04 version of Netbeans doesn't have the JavaFX plugin

    - by aliasbody
    I just want to know why does Netbeans 7.0.1 from the official Ubuntu 12.04 doesn't have all the plugins (in especial the JavaFX plugin) on it while the official Netbeans from the website (even the version with the less plugin), has it by default ? And how can we change that ? Because I love Ubuntu (even if it is extremly slow on my Asus 1215N (it is the only OS that is slow on it, but that's not very important), but I am trying to use it only with the software provided by the Original repositories without having to download manually or even use any PPA. Thanks in Advance

    Read the article

  • WUBI installation on Lenovo u310

    - by Tom
    I recently installed 12.04 through the WUBI on a Lenovo u310. The installation went fine, but when I rebooted into Windows 7, and then rebooted into Ubuntu, it immediately went to a command line 'grub' prompt. I was able to reboot from there successfully into 12.04 (once) but then on another occasion could do nothing to reboot into Ubuntu, so had to reinstall. The reason I used the WUBI route was that there are troubles in 12.04 recognizing the hard drives on Lenovo u310 on direct install from memory stick. This has been a bit frustrating, and I was surprised by the difficulties on the Lenovo u310.

    Read the article

  • How to hide bind mounts in nautilus?

    - by Bazon
    Summary: How do I remove folders mounted via bind or bindfs in /etc/fstab from appearing as devices in nautilus left column, the "places" view? detailed: Hello, I mount various directories from my data partition via bind in /etc/fstab in my home directory, eg like this: #using bind: /mnt/sda5/bazon/Musik /home/Bazon/Musik none bind,user 0 0 #or using bindfs bindfs#/mnt/sda5/tobi/Downloads /home/tobi/Downloads fuse user 0 0 (Background: /dev/sda5 mounted to /mnt/sda5 is my old home partition, but I do not want to mount it as a home partition, as I always have at least 2 Linuxes on the computer ...) That works well, but since 12.10 every one of those items is listed in Nautilus in the left column under "Devices". (Where normally USB drives appear, etc.) This is a waste of space (as I have many of such mounts...) and so I would like to have these mounts hidden, just as it was before in 12.04. How can I do that? Thanks!

    Read the article

  • Remove languages in translations?

    - by Pit
    Hi, I use spell-checker for 4 languages, en, de, fr, and lb. If I enable Spellchecking and writing aids for en, de or fr in System -> Administration -> Language Support there will be multiple versions of each language available, e.g. en , en_CA, en_GB, ... Is there a possibility to select only one of those language versions while enabling the language, or removing the others afterwards. It would be enough to remove them from the selection menu. I would like to use the version which is equal to the country the language originally comes from: e.g. de_DE, fr_FR, en_GB. For lb there is currently only lb_LU so there is no problem (yet). Instead of 4 languages I currently have around 20, which is kind of annoying when switching the language ( which I do quite often). There might be a similar problem for the menu translations, where if I understand correctly you can choose the order in which translations are applied if they exist. Any suggestions?

    Read the article

  • forbidden foldername?

    - by j0h
    I have a little webserver i run to help me at work. in an effort to neaten up the internal bits, I made a forlder named "doc" for documents. When i try to navigate to that folder i get "You don't have permission to access /doc/ on this server." so then, i looked at the permissions. drwxrwxr-x 2 J0h J0h 4096 Nov 7 22:46 doc/ drwxrwxr-x 5 J0h J0h 4096 Nov 6 12:35 ece/ drwxrwxr-x 2 J0h J0h 4096 Nov 6 12:35 exe/ permissions of "doc" looks legit. ece/ and exe both work, and have the same permissions. So then I changed the name of the folder "doc" to "docs" and it works. So evidently the folder-name doc is a black listed folder name? is that right? what is going one here?

    Read the article

  • LTSP thin client to single user mode

    - by DJC
    Is it possible to boot a LTSP thin client to single user mode? I've updated the default entry under /var/lib/tftpboot/ltsp/i386/pxelinux.cfg to read as follows: - append ro initrd=initrd.img root=/dev/nbd0 init=/sbin/init-ltsp nomodeset quiet splash **single** plymouth:force-splash vt.handoff=7 nbdroot=:ltsp_i386 This kind of works! I see the boot progress to the point where it asks me to either enter the root password or Ctrl+D to bypass. However, the boot process just seems to continue without providing an chance to do either.

    Read the article

  • HD Video Peformance Unacceptable

    - by Mike Hasselbeck
    Was wondering if anyone could help me boost HD 1080p video performance on my machine? I've got an AMD Athlon X2 Dual Core processor, 2 gb RAM & an ATI Radeon 5450 video card. I've installed the latest ATI Catalyst drivers, I installed the hardware acceleration things and linked them (I believe) to VLC. Still, it's still not running as well as I would like. Any thoughts or suggestions? Any help would be much appreciated. Thanks!

    Read the article

  • Openbox overhead is similar to that with gnome-panel

    - by drN
    I just installed openbox via sudo apt-get install openbox. It already has obconf, btw. I noticed that when I logged into my openbox session instead of the one I usually use (gnome-panel and NOT Ubuntu 2D or one of the high overhead environments) and checked via htop, I found that a similar amount of RAM was being occupied (~600 MB or so) with openbox or gnome-panel. What gives? Openbox looks lighter but it certainly isn't any different. Obviously the same daemons etc would run in both environments as they share the same folders. Is gnome-panel as good as openbox then?

    Read the article

  • How to stream on Twitch.Tv

    - by John
    Alright so I've had Linux Ubuntu 12.04 for over a year now and I still don't know anything about it. That only thing I can do with it is use the internet. I want to start streaming games that I play on my computer to Twitch.tv., but I don't know how. All of the downloads are only for windows. I found a website that tells you how to do it, but since I know nothing about linux, I can't do it. I haven't been able to get past the first step yet. Can someone please give me a step by step tutorial on how to do it. Please do not think you are being to specific, because I am sure it will help me. The link to the website is this -http://www.creativetux.com/2012/11/streaming-to-twitchtv-with-linux.html

    Read the article

  • Connected to wireless, but no internet access

    - by boogaloo
    After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

    Read the article

  • 'ia32-libs is not installed' while installing Skype on Ubuntu

    - by Vit Kos
    I downloaded skype from official site, but when installing I get this type of error (Reading database ... 100% (Reading database ... 150271 files and directories currently installed.) Unpacking skype (from .../skype-ubuntu_4.0.0.8-1_amd64.deb) ... dpkg: dependency problems prevent configuration of skype: skype depends on ia32-libs; however: Package ia32-libs is not installed. dpkg: error processing skype (--install): dependency problems - leaving unconfigured Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Read about that I need to install ia32-libs. Tried to install them like this sudo apt-get install package-name:i386 But it doesn't find it. Any hint? Thx.

    Read the article

  • Problem with .sh file

    - by omgzor
    I don't have any experience writing .sh files. I want to run the pvm2raw utility of this app from the Volume Library. I get the following error when running build.sh in Ubuntu 10.10. build.sh is as follows: # make command set mmfile=V3Makefile set make="make -f $mmfile" set rule=$1 if ($rule == "") set rule="all" // line 16 if ($rule == "deps") then if ($HOSTTYPE == "iris4d") $make MAKEDEPEND="CC -M" OPTS="-DHAVE_CONFIG_H -DVIEWER_HAVE_DCMTK" TARGET=IRIX depend if ($HOSTTYPE == "i386") $make MAKEDEPEND="c++ -M -I/usr/X11R6/include" OPTS="-DHAVE_CONFIG_H -DVIEWER_HAVE_DCMTK" TARGET=LINUX depend What's wrong there? Edit: I followed kniwor's advice and installed csh. Now I get the following error: How can I solve this Undefined variable problem?

    Read the article

  • How to convert an XFS file system to HFS+

    - by user219350
    I have repeatedly convinced of the reliability of the XFS file system , and I was more than satisfied . I was happy with everything in Ubuntu 14.04 ( great software) , but there is a little "but ! " Basically, I work on OSX-Mavericks 10.9.3, which sees very Windows 8.1 and works wonders with NTFS, but does not see Ubuntu! Briefly describe the equipment: ASRock B75 Pro3-M i5 3330 GeForce GTX 650 Ti SATA 500GB running OS X Mavericks + Clover - a boot disk Toshiba 2TB running Windows 8.1 (x64) and Ubuntu 14.04 (amd64) If you boot from the Toshiba (where there is Ubuntu and boot Windows + GRUB) after restart boot from Clover, it is impossible. Tried a lot of options - as Clover installation and boot priority, and various settings for GRUB, but have not found an acceptable option and have no desire to reinstall again Clover (Mavericks reboots 20 seconds - excellent!) So please help on the file system - how to convert from XFS to HFS+ journaled. Mavericks to saw it all synced on Mac. Thank you for the sensible answer and help! Originally in Russian.

    Read the article

  • how to list opened nautilus tabs with qdbus?

    - by Aquarius Power
    I am trying to dig into qdbus for nautilus to get a list of opened tabs; I managed to do this so far: sites=(`qdbus |grep nautilus -i`); for siteSrc in ${sites[@]};do list=(`qdbus $siteSrc`); for path in ${list[@]}; do qdbus $siteSrc $path |sed -r "s|.*|$siteSrc $path &|"; done; done |sort -u #|grep paths -i for ex.: I was able to get a list of selected files with qdbus org.gnome.NautilusApplication /org/nautilus_actions/DBus/Tracker/0 org.nautilus_actions.DBus.Tracker.Properties1.GetSelectedPaths but I cant find a clue for opened tabs locations? (so we can use on scripts to restore them later)

    Read the article

  • How to get Wifi Working Properly - I am Noob

    - by user287853
    I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

    Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >