Search Results

Search found 14772 results on 591 pages for 'full trust'.

Page 496/591 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

  • regexp to match string with (comma-separated) number at start and to split into number and rest?

    - by mix
    Given a string such as: 23,234,456 first second third How can I split string this into two parts, where part 1 contains the number at the beginning and part 2 contains the rest---but only if the string STARTS with a number, and the number can be comma-separated or not? In other words, I want two results: 23,234,456 and first second third. If there's a number in that string that isn't part of the first number then it should be in the second result. My best stab at this so far, to grab the number at the beginning, is something like this: ^[0-9]+(,[0-9]{3})* Which seems to grab a comma-separated or non-comma-separated number that starts the line. However, when I run this in the Javascript console I get not only the full number, but also a match on just the last 3 digits with their preceeding ,. (e.g. 23,234,456 and ,456). As for getting the rest into another var I'm having trouble. I tried working with \b, etc., but I think I must be missing something fundamental about grabbing the rest of the line. I'm doing this in Javascript in case it matters. More examples of what to match and what not to match. 2 one two three should return 2 and one two three 2345 one two three should return 2345 and one two three 2 one 2 three should return 2 and one 2 three 2,234 one two 3,000 should return 2,234 and one two 3,000 The space between parts 1 and two could be included in the beginning of part 2.

    Read the article

  • UIView scaled to thumbprint, what about subviews?

    - by Parad0x13
    I have a UIImageView that I create progmatically right? Works like a charm when I initWithImage and set the parameters for scaling to UIViewContentModeScaleToFill. I can scale all day long and create many different smaller 'thumbprint' sized versions of the UIImageView at whim, HOWEVER when I add subviews to said UIImageView and then try to scale the happy new parent the child subview does not scale! I looked around and found that I should enable the setAutoresizingSubviews boolean of the parentView to true (Which I did) and then call: ChildView.autoresizingMask = UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleWidth; Which I also did... now when I scale the parent view the child also scales but crazy wacked out like and goes all over the place (Not a very good way of putting it) but my point is that I assumed the child would scale proportionally to the parent and stay in the same place (Which it doesn't) My question is how do I set up my code so that when I scale my parent view by 1/4 or w/e to make a thumbprint of the view the children subviews that the parent view owns will scale accordingly and allow the 1/4 sized thumbprint to look just like the full sized view (Just smaller).

    Read the article

  • Inline form editing on client side

    - by bykasif
    I see some web sites use dynamic forms(I am not sure about how to call them!) to edit a group of data. For example: there is a group of data such as name, last name, city, country.etc. when user clicks on EDIT button, instead of doing postback, a form, consisisting of 2 textboxes + 2 comboboxes, dynamically opens to edit,And then when you click on Save button, edit form disappears, and all data updates.. Now, I know what happens over here is using Ajax for server calls and some javascript for dom manipulation.. I even found some jquery plugins for textbox editing.. However, I could not found anything for full implementation of form fields. Therefore I have implemented it on asp.net by jquery ajax calls and dom manipulation manually. here is my process: 1) when Edit button clicked: Make a ajax call to server to retrieve necessary formedit.aspx 2) it returns editable form fields with values assigned. 3) when Save button clicked: make ajax call to server to retrieve formupdateprocess.aspx page. it basically do the database updates and then return necessary DOM snipplet (...) to insert current page.. well it works but MY PROBLEM, is performance.. Result seems slower than samples I see in other sites.:(( IS there anything that I dont know? a better way to implement this??

    Read the article

  • Python/Sqlite app for web or desktop?

    - by ChrisC
    I am in the planning stages of rewriting an Access db I wrote several years ago in a full fledged program. I have very slight experience coding, but not enough to call myself a programmer by far. I'll definitely be learning as I go, so I'd like to keep everything as simple as possible. I've decided on Python and SQLite for my program, but I need help on my next decision. Here is my situation 1) It'll be a desktop program, run locally on each machine, all Windows 2) I want a nice looking GUI with colors, different shaped buttons, nice menus, lists, etc, etc 3) I'm thinking about using a browser interface because (a) from what I've read, browser apps can look really great, and (b) I understand there are lots of free tools to assist in setting up the GUI/GUI code with drag and drop tools, so that helps my "keep it simple" goal. 4) I want the program to be totally portable so it runs completely from one single folder on a user's PC. If I do go the browser app router, a major concern I have is the possibility that a user's browser settings could affect or break the app. How likely is this? What other pros and cons are there for my situation?

    Read the article

  • ActionListener isn't Implementing

    - by Nick Gibson
    JFrameWithPanel is not abstract and does not override abstract method actionPerformed(java.awt.event.ActionEvent) in java.awt.event.ActionListener public class JFrameWithPanel extends JFrame implements ActionListener I Don't get this code. Book and Java site tells me this is the syntax for the method, but again this error shows up constantly. import javax.swing.*; import javax.swing.JOptionPane; import java.awt.*; import java.awt.event.*; import java.lang.Math.*; import java.lang.Integer.*; import java.util.*; import java.util.Random; import java.io.*; import java.text.*; import java.text.DecimalFormat.*; public class JFrameWithPanel extends JFrame implements ActionListener { JButton button = new JButton("Exit"); public JFrameWithPanel() { super("JFrame with Panel"); JComboBox packageChoice = new JComboBox(); packageChoice.addItem("A+ Certification"); packageChoice.addItem("Network+ Certification "); packageChoice.addItem("Security+ Certifictation"); packageChoice.addItem("CIT Full Test Package"); packageChoice.addActionListener(this); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JPanel pane = new JPanel(); pane.add(button); pane.add(packageChoice); setContentPane(pane); setSize(200,100); setVisible(true); } } then later public class CreateJFrameWithPanel { public static void main(String[] args) { JFrameWithPanel panel = new JFrameWithPanel(); } }

    Read the article

  • mscomctl.ocx on my dev machine gives me problems since security patch of MS

    - by Bronzato
    I am busy on this problem since 2 days ago and hope someone can get me out of it. I have Excel 2010 (full install 944Mb) on my Windows 8 computer. It works well. But when I modify my workbook (containing a ListView version 6.0) I am not able to run it on my client's computer. I get the error: Could Not Load An Object. Not Available on This Machine. Even it works well on my dev machine. The reason is: Microsoft applied a Security Patch (near august 2012 I think) on mscomctl.ocx and my Excel 2010 installation files (downloaded not long ago) contains the new version of mscomctl.ocx. The clients using my Excel file don't apply the security patch at this moment. Se everytime I publish my Excel file to client's computers (from my dev environment), I reference the new mscomctl.ocx. That's the problem. I already try to get the old mscomctl.ocx from client's computer and copy & register it on my dev machine but then I got errors (Class not registered, ...) when I create a userform and drag a listview on it. So: mscomctl.ocx on client's machine is version 6.1.98.13 from 2008. mscomctl.ocx on my dev machine is version 6.1.98.34 from 2012. My question: Does someone have an idea how to proceed to have a usable version of mscomctl.ocx on my dev machine? Thank you very much.

    Read the article

  • DotNetOpenAuth getting return_To url as the provider

    - by Jeff
    I have a provider that I'm upgrading from version 2 to version 3. basically a user comes to one of our sites and we say "if you don't have an openID sign up with this one" They click that and are sent to our in house provider what signs them up for an account and has to verify their email address. In the link I send via Email I included the return to url . This way when they click the link to verify their email (sometimes up to a week later) they are sent to our page that knows to send them back to the returnTo to login. I could not find a good way to do this in version 2 so I used a hack. Sadly this hack broke in version 2 so I'm completely stumped as to how to find the login page url that is the return_To Note: I need the full URL not just the domain. old hack: if (ProviderEndpoint.PendingAuthenticationRequest != null) { req = ProviderEndpoint.PendingAuthenticationRequest.ToString(); int startpos = req.LastIndexOf("CheckIdRequest.ReturnTo = '"); startpos += "CheckIdRequest.ReturnTo = '".Length; int endpos = req.LastIndexOf("token=") - startpos-1; if (endpos > 0) { req = req.Substring(startpos, endpos); } else { log.Fatal("Missing token in url" + ProviderEndpoint.PendingAuthenticationRequest.ToString()); return "~/"; } req = req.Replace("&internalLogin=True", ""); req = req.Replace("?internalLogin=True&", "?"); req = req.Replace("?internalLogin=True", ""); }

    Read the article

  • Send email from webpage without postback/refresh

    - by jb
    Hi all. Long time reader, first time writer. Quick query i hope someone can help me with. I have a webpage (php, javascript) which has a small contact form for a user to fill in and email us. Not a problem in itself, i have a working form already. Nothing noteworthy, just a form posting to a php page which sends an email. <form id="myform" name="myform" method="post" action="Mailer.php"> So user fills in form, hits submit and the page changes to mailer.php and they find their way back to where they were. What I want instead is for the to stay on the same page when submit is pushed. The form div to update itself to just say 'message sent' or something. I just want to avoid a full page refresh. Much like how on say facebook, commenting on a status only updates that div. Hope that is phrased clearly enough. Cheers all,

    Read the article

  • XML Reader threw Object Null exception, but node exists(?!)

    - by Capt.Morgan
    I am hoping someone could enlighten me as to why I am getting the annoying - "xml object reference not set to an instance .." error. The elements (nodes?) I am looking for seem to exist and I have not misspelled it either :[ I might be doing something stupid here, but any help at all would be greatly appreciated. My Code: private void button1_Click(object sender, RoutedEventArgs e) { XmlDocument reader = new XmlDocument(); reader.Load("Kotaku - powered by FeedBurner.xml"); XmlNodeList titles = reader.GetElementsByTagName("title"); XmlNodeList dates = reader.GetElementsByTagName("pubDate"); XmlNodeList descriptions = reader.GetElementsByTagName("description"); XmlNodeList links = reader.GetElementsByTagName("link"); for (int i = 0; i < titles.Count; i++) { textBox1.AppendText(Environment.NewLine + titles[i].InnerText); textBox1.AppendText(Environment.NewLine + descriptions[i].InnerText); //<<-- Throws Object Ref Null Exception textBox1.AppendText(Environment.NewLine + links[i].InnerText); textBox1.AppendText(Environment.NewLine + dates[i].InnerText); //<<-- Throws Object Ref Null Exception } } The XML I am using is a saved XML page from: http://feeds.gawker.com/kotaku/full The way I am working on it now is as follows: I have saved the page from the above link (which is an XML page) and put it next to my EXE for easier access. Then I run the code.

    Read the article

  • Named Range Breaks Code

    - by Daniel
    I have one workbook with several sheets. I populate the listboxes (pulling static data from cells) on the 2nd sheet, click a button and it runs fine. When I populate the listboxes with a named range, the listbox populates the way I want, but I get an error because the code thinks that I didn't select anything in the listbox, even though I did. So it passes through "" instead of "title". Is this a common issue? The named range isn't a problem because it passes through the data to the listbox and I know it's selecting data because as soon as the listbox loses focus, it spits out the contents of the cell into cell A1. What's even stranger is that I have the contents of the listbox set to Msg1. So A1 gets populated with Msg1 (what I actually selected in the listbox). But when I try and use Msg1 in the code, it tells me that Msg1 is "". Again, this only happens when I use the dynamic named range, not with static data in cells K1:K9. Private Function strEndSQL1 As String Dim strSQL As String strSQL = "" 'Create SQL statement strSQL = "FROM (SELECT * FROM dbo.Filter WHERE ID = " & TextBox1.Text & " And Source IN (" & Msg1 & ")) a FULL OUTER JOIN " strSQL = strSQL & "(SELECT * FROM dbo.Filters WHERE ID = " & TextBox2.Text & " And Source IN (" & Msg1 & ")) b " strSQL = strSQL & "ON a.Group = b.Group strEndSQL = strSQL End Function

    Read the article

  • MySQL query paralyzes site

    - by nute
    Once in a while, at random intervals, our website gets completely paralyzed. Looking at SHOW FULL PROCESSLIST;, I've noticed that when this happens, there is a specific query that is "Copying to tmp table" for a loooong time (sometimes 350 seconds), and almost all the other queries are "Locked". The part I don't understand is that 90% of the time, this query runs fine. I see it going through in the process list and it finishes pretty quickly most of the time. This query is being called by an ajax call on our homepage to display product recommendations based your browsing history (a la amazon). Just sometimes, randomly (but too often), it gets stuck at "copying to tmp table". Here is a caught instance of the query that was up 109 seconds when I looked: SELECT DISTINCT product_product.id, product_product.name, product_product.retailprice, product_product.imageurl, product_product.thumbnailurl, product_product.msrp FROM product_product, product_xref, product_viewhistory WHERE ( (product_viewhistory.productId = product_xref.product_id_1 AND product_xref.product_id_2 = product_product.id) OR (product_viewhistory.productId = product_xref.product_id_2 AND product_xref.product_id_1 = product_product.id) ) AND product_product.outofstock='N' AND product_viewhistory.cookieId = '188af1efad392c2adf82' AND product_viewhistory.productId IN (24976, 25873, 26067, 26073, 44949, 16209, 70528, 69784, 75171, 75172) ORDER BY product_xref.hits DESC LIMIT 10 Of course the "cookieId" and the list of "productId" changes dynamically depending on the request. I use php with PDO.

    Read the article

  • Visual Studio internal project references not always working

    - by Chris
    I am using Visual Studio and a solution with 10 or so projects in (mostly VB, some C#) which have various dependencies set up. Usually when I compile the solution it works fine. Occasionally when I do it I get a build error saying that one of the projects referenced is the wrong version (I think always the same one, possibly may be two that can cause problems). In this case going to the solution explorer and right clicking on the mentioned project and saying "rebuild" followed by another full build makes it work fine. I assume there is something set up wrong somewhere but I didn't set up the solution myself initially and a quick look through doesn't show anything immediately wrong. It feels like there is some kind of race condition, that VS is internally setting the version number of the project it needs before that project has been rebuilt and thus gets it wrong or something like that but I'm sure VS should handle all this sort of thing properly. Can anybody please suggest places that I could check for whether this has been correctly set up... And I should finally note that since I don't have reliable repro of this I may not be able to respond to questions too quickly. For example the obvious one of "Could you give the exact error message" will have to wait since I didn't think to copy it this morning, it was only after I cleared it up with the above steps that I thought to post here. Similarly any solutions may take a while to confirm.

    Read the article

  • Evaluating creation of GUI via file vs coding

    - by nevets1219
    I'm working on a utility that will be used to test the project I'm currently working on. What the utility will do is allow user to provide various inputs and it will sends out requests and provide the response as output. However, at this point the exact format (which input is required and what is optional) has yet to be fleshed out. In addition, coding in Swing is somewhat repetitive since the overall work is simple though this should be the safest route to go as I have more or less full control and every component can be tweaked as I want. I'm considering using a configuration file that's in XML to describe the GUI (at least one part of it) and then coding the event handling part (in addition to validation, etc). The GUI itself shouldn't be too complicated. For each type of request to make there's a tab for the request and within each tab are various inputs. There seems to be quite a few questions about this already but I'm not asking for a 3rd party library to do this. I'm looking to do this myself, since I don't think it'll be too overly complicated (hopefully). My main consideration for using this is re-usability (later on, for other projects) and for simplifying the GUI work. My question is: are there other pros/cons that I'm overlooking? Is it worth the (unknown) time to do this? I've built GUI in VB.NET and with Flex3 before.

    Read the article

  • With ASP.NET MVC, what is the preferred way to Ajaxify a simple form?

    - by Swoop
    I am trying to add a simple comments/message box to a web page. When the user enters the comment and hits submit, I would like to save this message to the database and add the comment to the list displayed on the page, without refreshing the entire page. However, I am not sure of the best way to do that these days. I am using ASP.NET MVC 2. I have been trying to read up on using JQuery for this type of functionality, but I am having problems getting a full picture of the correct approach that isn't also out of date (i.e. it is using an preview version of MVC 1 or older version of JQuery). I can either find snippets of different pieces without the information of how they work together, or the information appears to be quite dated and no longer valid. Can someone point me in the right direction for something like this? Ideally, I am looking for a simple example of the JQuery code, a snippet of any key differences in an HTML form from a normal post method, and the basic method used in the MVC Controller. I need something to help the lightbulb of understanding to turn on. :) Any help would be greatly appreciated!!

    Read the article

  • How to merge two icons together? (overlay one icon on top of another)

    - by demoncodemonkey
    I've got two 16x16 RGB/A .ICO icon files, each loaded into a separate System.Drawing.Icon object. How would you create a new Icon object containing the merge of the two icons (one overlaid on top of the other)? Edit: I probably wasn't too clear, I don't want to blend two images into each other, I want to overlay one icon on top of another. I should add that the icons already contain transparent parts and I do not need any transparent "blending" to make both icons visible. What I need is to overlay the non-transparent pixels of one icon over the top of another icon. The transparent pixels should let the background icon show through. For example, look at the stackoverflow icon. It has some areas that are grey and orange, and some areas that are totally transparent. Imagine you want to overlay the SO icon on top of the Firefox icon. You would see the greys and oranges of the SO icon in full colour, and where the SO icon is transparent, you would see those parts of the Firefox icon.

    Read the article

  • Is there a way to create subdatabases as a kind of subfolders in sql server?

    - by user193655
    I am creating an application where there is main DB and where other data is stored in secondary databases. The secondary databases follow a "plugin" approach. I use SQL Server. A simple installation of the application will just have the mainDB, while as an option one can activate more "plug-ins" and for every plug-in there will be a new database. Now why I made this choice is because I have to work with an exisiting legacy system and this is the smartest thing I could figure to implement the plugin system. MainDB and Plugins DB have exactly the same schema (basically Plugins DB have some "special content", some important data that one can use as a kind of template - think to a letter template for example - in the application). Plugin DBs are so used in readonly mode, they are "repository of content". The "smart" thing is that the main application can also be used by "plugin writers", they just write a DB inserting content, and by making a backup of the database they creaetd a potential plugin (this is why all DBs has the same schema). Those plugins DB are downloaded from internet as there is a content upgrade available, every time the full PlugIn DB is destroyed and a new one with the same name is creaetd. This is for simplicity and even because the size of this DBs is generally small. Now this works, anyway I would prefer to organize the DBs in a kind of Tree structure, so that I can force the PlugIn DBs to be "sub-DBs" of the main application DB. As a workaround I am thinking of using naming rules, like: ApplicationDB (for the main application DB) ApplicationDB_PlugIn_N (for the N-th plugin DB) When I search for plugin 1 I try to connect to ApplicationDB_PlugIn_1, if I don't find the DB i raise an error. This situation can happen for example if som DBA renamed ApplicationDB_Plugin_1. So since those Plugin DBs are really dependant on ApplicationDB only I was trying to "do the subfolder trick". Can anyone suggest a way to do this? Can you comment on this self-made plugin approach I decribed above?

    Read the article

  • How can I serialize functions using JSON or some other serialization library?

    - by Oragamster
    I am trying to create a program that uses javascript to write a simple textadventure that I can then post on my blog and run on my iphone. I have run into a problem though. I was trying to make it so that my program would save it's state into cookies using JSON to convert it into strings and then post it into a cookie but then I realised that I couldn't serialize the functions that are on my item object. I was trying to make it so that my item would have an associative array that would contain the name of the use as the key and the function as the value. This worked well untill I tried to serialize it. I learned that I could create a JSON like serialization for functions by storing the body into a string and using escape charectors for the double quotes but for some reason I was unable to make my cookie with the function as the string stored. When I posted the cookie and then tried to get it back the string wasn't there. My code and the over all project are on my site if you want to look at that, though my full code including the item actions are not posted yet.

    Read the article

  • Parallelizing L2S Entity Retrieval

    - by MarkB
    Assuming a typical domain entity approach with SQL Server and a dbml/L2S DAL with a logic layer on top of that: In situations where lazy loading is not an option, I have settled on a convention where getting a list of entities does not also get each item's child entities (no loading), but getting a single entity does (eager loading). Since getting a single entity also gets children, it causes a cascading effect in which each child then gets its children too. This sounds bad, but as long as the model is not too deep, I usually don't see performance problems that outweigh the benefits of the ease of use. So if I want to get a list in which each of the items is fully hydrated with children, I combine the GetList and GetItem methods. So I'll get a list and then loop through it getting each item with the full cascade. Even this is generally acceptable in many of the projects I've worked on - but I have recently encountered situations with larger models and/or more data in which it needs to be more efficient. I've found that partitioning the loop and executing it on multiple threads yields excellent results. In my first experiment with a list of 50 items from one particular project, I did 5 threads of 10 items each and got a 3X improvement in time. Of course, the mileage will vary depending on the project but all else being equal this is clearly a big opportunity. However, before I go further, I was wondering what others have done that have already been through this. What are some good approaches to parallelizing this type of thing?

    Read the article

  • Porting Perl to C++ `print "\x{2501}" x 12;`

    - by jippie
    I am porting a program from Perl to C++ as a learning objective. I arrived at a routine that draws a table with commands like the following: Perl: print "\x{2501}" x 12; And it draws 12 times a '?' ("box drawings heavy horizontal"). Now I figured out part of the problem already: Perl: \x{}, \x00 Hexadecimal escape sequence; C++: \unnnn To print a single Unicode character: C++: printf( "\u250f\n" ); But does C++ have a smart equivalent for the 'x' operator or would it come down to a for loop? UPDATE Let me include the full source code I am trying to compile with the proposed solution. The compiler does throw an errors: g++ -Wall -Werror project.cpp -o project project.cpp: In function ‘int main(int, char**)’: project.cpp:38:3: error: ‘string’ is not a member of ‘std’ project.cpp:38:15: error: expected ‘;’ before ‘s’ project.cpp:39:3: error: ‘cout’ is not a member of ‘std’ project.cpp:39:16: error: ‘s’ was not declared in this scope #include <stdlib.h> #include <stdint.h> #include <stdio.h> #include <string.h> int main ( int argc, char *argv[] ) { if ( argc != 2 ) { fprintf( stderr , "usage: %s matrix\n", argv[0] ); exit( 2 ); } else { //std::string s(12, "\u250f" ); std::string s(12, "u" ); std::cout << s; } }

    Read the article

  • how to delete a line from file using awk filtered by some string

    - by embedded
    I have a file delimited by space. I need to write an awk command that receives a host name argument and it should replace the host name if it already defined in the file. It must be a full match not partially - if the file contains this host name: localhost searching for "ho" will fail and it will be added to the end of the file. another option is a delete: again awk receives host name argument and it should remove it from the file if exists. This is what I have so far: (It needs some enhancements) if [ "$DELETE_FLAG" == "" ]; then # In this case the entry should be added or updated # if clause deals with updating an existing entry # END clause deals with adding a new entry awk -F"[ ]" "BEGIN { found = 0;} \ { \ if ($2 == $HOST_NAME) { \ print \"$IP_ADDRESS $HOST_NAME\"; \ found = 1; \ } else { \ print \$0; \ } \ } \ END { \ if (found == 0) { \ print \"$IP_ADDRESS $HOST_NAME\"; } \ } " \ /etc/hosts > /etc/temp_hosts else # Delete an existing entry awk -F'[ ]' '{if($2 != $HOST_NAME) { print $0} }' /etc/hosts > /etc/temp_hosts fi Thanks

    Read the article

  • How can I parse_url in PHP when there is a URL in a string variable?

    - by Eric O
    I am admittedly a PHP newbie, so I need some help. I am creating a self-designed affiliate program for my site and have the option for an affiliate to add a SubID to their link for tracking. Without having control over what is entered, I have been testing different scenarios and found a bug when a full URL is entered (i.e. "http://example.com"). In my PHP I can grab the variable from the string no problem. My problem comes from when I get the referring URL and parse it (since I need to parse the referring URL to get the host mane for other uses). Code below: $refURL = getenv("HTTP_REFERER"); $parseRefURL = parse_url($refURL); WORKS when incoming link is (for example): http://example.com/?ref=REFERRER'S-ID&sid=www.test.com ERROR when incoming link is (notice the addition of "http://" after "sid="): http://example.com/?ref=REFERRER'S-ID&sid=http://www.test.com Here is the warning message: Warning: parse_url(/?ref=REFERRER'S-ID&sid=http://www.test.com) [function.parse-url]: Unable to parse url in /home4/'directory'/public_html/hosterdoodle/header.php on line 28 Any ideas on how to keep the parse-url function from being thrown off when someone may decide to place a URL in a variable? (I actually tested this problem down to the point that it will throw the error with as little as ":/" in the variable)

    Read the article

  • Manually extracting portions of strings contained in a list (parsing)

    - by user1652011
    I'm aware that there are modules that fully simplify this function, but saying that I am running from a base install of python (standard modules only), how would I extract the following: I have a list. This list is the contents, line by line, of a webpage. Here is a mock up list (unformatted) for informative purposes: <script> link = "/scripts/playlists/1/" + a.id + "/0-5417069212.asx"; <script> "<a href="/apps/audio/?feedId=11065"><span class="px13">Eastern Metro Area Fire</span>" From the above string, I need the following extracted. The feedId (11065), which is incidentally a.id in the code above., "/scripts/playlists/1/" and "/0-5417069212.asx". Remembering that each of these lines is just contents from objects in a list, how would I go about extracting that data? Here is the full list: contents = urllib2.urlopen("http://www.radioreference.com/apps/audio/?ctid=5586") Pseudo: from urllib2 import urlopen as getpage page_contents = getpage("http://www.radioreference.com/apps/audio/?ctid=5586") feedID = % in (page_contents.search() for "/apps/audio/?feedId=%") titleID = % in (page_contents.search() for "<span class="px13">%</span>") playlistID = % in (page_contents.search() for "link = "%" + a.id + "*.asx";") asxID = * in (page_contents.search() for "link = "*" + a.id + "%.asx";") streamURL = "http://www.radioreference.com/" + playlistID + feedID + asxID + ".asx" I plan to format it as such that streamURL should = : http://www.radioreference.com/scripts/playlists/1/11065/0-5417067072.asx

    Read the article

  • Why C++ is (one of) the best language to learn at first [closed]

    - by AlexV
    C++ is one of the most used programming language in the world since like 25+ years. My first job as programmer was in C++ and I coded in C++ everyday for nearly 4 years. Now I do mostly PHP, but I will forever cherish this C++ background. C++ has helped me understand many "under the hood" features/behaviors/restrictions of many other (and different) programming languages like PHP and Delphi. I'm a full time programmer for 6+ years now and since I have a quite varied programming background I often get questions by "newbies" as where to start to become a "good" programmer. I think C++ is one of the best language to start with because it gives you a real usefull experience that will last and will teach you how things work under the hood. It's not the easier one to learn for a newbie, but in my opinion it's the one who will reward the most in long term. I would like to know your opinion on this matter to add to my arguments when I guide "newbies". After this introduction, here's my question : Why C++ is for you (one of) the best language to learn at first. Since it's subjective, I've marked this question as community wiki.

    Read the article

  • Why is Excel's 'Evaluate' method a general expression evaluator?

    - by jtolle
    A few questions have come up recently involving the Application.Evaluate method callable from Excel VBA. The old XLM macro language also exposes an EVALUATE() function. Both can be quite useful. Does anyone know why the evaluator that is exposed can handle general expressions, though? My own hunch is that Excel needed to give people a way to get ranges from string addresses, and to get the value of named formulas, and just opening a portal to the expression evaluator was the easiest way. (The help for the VBA version does say its purpose it to "convert a Microsoft Excel name to an object or a value".) But of course you don't need the ability to evaluate arbitrary expressions just to do that. (That is, Excel could provide a Name.Evaluate method or something instead.) Application.Evaluate seems kind of...unfinished. It's full behavior isn't very well documented, and there are quite a few quirks and limitations (as described by Charles Williams here: http://www.decisionmodels.com/calcsecretsh.htm) with what is exposed. I suppose the answer could be simply "why not expose it?", but I'd be interested to know what design decisions led to this feature taking the form that it does. Failing that, I'd be interested to hear other hunches.

    Read the article

  • XmlSerializer construction with same named extra types

    - by NoizWaves
    Hey, I am hitting trouble constructing an XmlSerializer where the extra types contains types with the same Name (but unique Fullname). Below is an example that illustrated my scenario. Type definitions in external assembly I cannot manipulate: public static class Wheel { public enum Status { Stopped, Spinning } } public static class Engine { public enum Status { Idle, Full } } Class I have written and have control over: public class Car { public Wheel.Status WheelStatus; public Engine.Status EngineStatus; public static string Serialize(Car car) { var xs = new XmlSerializer(typeof(Car), new[] {typeof(Wheel.Status),typeof(Engine.Status)}); var output = new StringBuilder(); using (var sw = new StringWriter(output)) xs.Serialize(sw, car); return output.ToString(); } } The XmlSerializer constructor throws a System.InvalidOperationException with Message "There was an error reflecting type 'Engine.Status'" This exception has an InnerException of type System.InvalidOperationException and with Message "Types 'Wheel.Status' and 'Engine.Status' both use the XML type name, 'Status', from namespace ''. Use XML attributes to specify a unique XML name and/or namespace for the type." Given that I am unable to alter the enum types, how can I construct an XmlSerializer that will serialize Car successfully?

    Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >