Search Results

Search found 28841 results on 1154 pages for 'simple'.

Page 496/1154 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

• Applications don't see mapped network drive after waking from sleep

  - by Chris

  I have a network share mapped as a drive letter on a Windows 7 PC that's part of a simple home network. When I wake the PC from sleep, Explorer sometimes says the drive is disconnected. Doubleclicking the drive connects it instantly, as far as Explorer is concerned. But some other applications don't see the drive unless I take additional steps (e.g., navigate to the drive in an "Open..." dialog). Is there any way to get the drive to be connected for all purposes immediately when resuming from standby? I've found the "Always wait for the network at computer startup and logon" item in Group Policy, but I'm not sure what the setting does or whether it would fix this problem. I have network discovery enabled and un-firewalled.

  Read the article

• Determining who is running with administrator rights?

  - by Alex C.

  I work at a small non-profit organization with about 55 desktop PCs running Windows XP Pro. The domain controller is running Windows Server 2003. I have a two-part question (note that I'm a bit of a newb when it comes to network administration). Part 1: Is there some simple way that I can determine which accounts are logged in with administrator rights? Part 2: Is there a way that I can remove administrator rights from users without sitting down at each individual machine? Thanks for considering my questions.

  Read the article

• Ubuntu Not Starting After Installing Software Updates

  - by Prabhu

  I just did a software update on my Ubuntu 9.10, after that it asked me to restart my system which i did and once i did that, grub opend some simple bash shell or something... i dont know how do i run ubuntu now??? Ubuntu 9.10 was installed 1 week back using the wubi installer... which is like a one click install from windows... it is installed on the same partition as winxp... i chose 12 gb hd space while installing ubuntu.. it was working good for 1 week... i decided to do the software updates today morning and now its not even starting!!!

  Read the article

• IIS 7 - Provisioning portal

  - by Doug

  I am wanting to setup our production IIS environments with a provisioning portal to ensure that deployment staff always setup sites in a uniform configuration, and that they don't actually have remote access to the servers directly. What is the best 'simple' provisioning tool for such a purpose? Do people write their own using something like Powershell remoting? I don't want to install a tool like HELM or similar as it feels like it creates unnecessary bloat on top of a production environment. features should include: create new website and app pool combo restart, start and stop application pools change bindings on websites

  Read the article

• Which is the most independent and secure email service? [closed]

  - by Rafal

  I'm looking for a provider with a secure transfer protocol (like https) Secured (as much as it is possible) from being hacked or spied on. One that won't scan my email in order to display more accurate ads. One that won't sell my personal information. One that won't disclose my emails to some sort of government (it probably must be based outside of US or Chinese jurisdiction I reckon) Encrypted if possible. It can be simple and without huge storage. If you know/use any similar service I would be really grateful if you could point me there. Cheerz

  Read the article

• Nagios - NagWin - Send notification with gmail

  - by Attila Bujáki

  I would like to send Nagios notifications using my gmail account. I have already set up my hosts I want to monitor and services also. What is the most simple way to accomplish this using NagWin on a Windows Server 2012 installation? As far as I know I must change some of these configuration settings: # 'notify-host-by-email' command definition define command{ command_name notify-host-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" -server ??? } # 'notify-service-by-email' command definition define command{ command_name notify-service-by-email command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /bin/blat - -to $CONTACTEMAIL$ -f nagios@localhost -subject "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" -server ??? } What should I use for smtp server? Is it possible to directly send my notifications to the Gmail server?

  Read the article

• Why class 'SQLiteDatabase' is not found in /var/www/*.php?

  - by Roman

  I am trying to use sqlite from PHP. I have the following simple code: <?php $db = new SQLiteDatabase("test2.sdb"); unset($db); ?> As the result of this code (which I execute in the command line "php test2.php") I get: Fatal error: Class 'SQLiteDatabase' not found in /var/www/test2.php on line 3 Does anybody know how can I make PHP able to use sqlite? P.S. Here I found out that "SQLite support is enabled by default on a standard Linux PHP compilation starting with PHP 5.0." And I have "PHP Version = 5.2.6-2ubuntu4.6". So, sqlite should be enabled unless the "--disable-sqlite". In my case output of "phpinfo();" does not contain "sqlite" at all.

  Read the article

• Need help with Microsoft Access 07 & Reports

  - by Moe

  I'm finding it difficult to get MS reporting working to what I'd like to show. What I'm trying to do is: a) In my database store a URL file (HTTP external file), that is a .jpeg. I'd like to use that URL to call the image on the report sheet. I have tried to use 'Control source' on the data panel, but with no success. Any way I can get Dynamic Images to show up on each database. Also, I have a couple of Relational Databases. One Defines Values: For Example: DefinePets('petID','Name of Pet') The other one links the Main DB with the 'DefinePets' database. Eg: connect('petID','mainID','extraFeild') I'd like my report to Go into the "connect" Table, where the the currently viewed Record Value = mainID, then find petID and return Name of Pet. There is a many to many link between definePets and the main Table. (Therefore connect is joining them up) Or is that too much to ask from a simple package like Access?

  Read the article

• Windows SBS 2011 DNS Role (service) failing & needing restarting

  - by HaydnWVN

  Have a Windows SBS 2011 with Exchange that is handling all DNS for the network. Since getting a 3rd party (Hardware & Support) to setup a recieving FTP service and restricting Exchanges memory useage for another 3rd party product (Stock software) the local network seems to periodically 'lose the internet connection'. Delving deeper I found that the DNS service is somehow failing/stopping without the actual service on the server reporting such (nothing in event logs). A simple restart of the 'DNS Role' on the server solves the problem. The manager onsite reports that he has to do this most days in the afternoon - yet not at the same time and other days it works fine without a restart being required. I'm unable (lacking sufficient SBS2011 knowledge) to diagnose this further, ideally I would like the DNS Role to report (and log) the failure, then automatically restart itself.

  Read the article

• tag based file organizer

  - by Richie

  I'm finishing professional school and over the years have acquired a pile of notes and articles that I'd like to hang onto. I'd like to add to them and create sort of an archive of article and files that may be useful down the road. I'd also like to organize this collection of files not only by simple grouping but also with tags. I feel like that will make searching through them years later much easier. Suggestions on software that would be good for this? Just a general file manager, something that uses tags that can be attached to each file? Thanks

  Read the article

• Multiple LiveCD iso's on a single USB drive

  - by Keck

  I am looking to create a USB flash drive that I can put multiple LiveCD iso's on and select which boots from startup. The ideal candidate supports linux and windows based iso's, and is relatively simple. It also must have some reasonable process for adding and removing iso from the drive/list. Things that I'm not looking for this specific question: UBCD or other swiss-army knife livecd's. The point is to boot any one of multiple CD's, not to boot a (certainly useful) utility CD. Installing a single LiveCD to a USB drive. I'd like to have multiple iso images, selectable at startup. I don't have a specific purpose in mind, possibilties include a single drive with a knoppix variant, ubuntu desktop, UBCD for dos, UBCD4Win, the Offline NT Password Cracker, etc. Flexible and easy to use are the name of the game!

  Read the article

• embed file in Excel cell

  - by Crash893

  I'm working on a simple "DB" for some people at work and I don't want to do anything fancy. the fields should be something like name , number , notes , File:resume, notes (where file:notes is the acutall embedded resume. I cant see any obvious way to do this but i thought i would ask just the same. Is there a way to take a (pdf , doc , docx , txt) and throw it into a cell so a user can click on it and it will open the file in the approate program note: this db is going to be floating around between multiple sites so linking won't work.

  Read the article

• How to get Windows 7 logon wallpaper to tile to other monitors?

  - by Oskar Duveborn

  In 2000/XP/Vista it was easy to set a wallpaper for the logon screen, either manually through tools like Logonstudio or simple registry changes by hand on prepared installation images or through custom group policies. In Windows 7 all this works as usual, but the secondary (or any additional) monitor is just black. The mouse pointer is visible on it but no matter what settings I can't get the wallpaper to tile (or stretch or fill or whatever) over onto it. This makes it hard to OEM/company brand the installation for multi-monitor users. More annoying is the fact that it looks officially supported to brand the logon wallpaper in Windows 7 - as it's made extremely easy... apart from this little catch.

  Read the article

• Creating Multiple Users on Single PHP-FPM Pool

  - by Vince Kronlein

  Have PHP-FPM/FastCGI up and running on my cPanel/WHM server but I'd like have it allow for multiple users off of a single pool. Getting all vhosts to run off a single pool is simple by adding this to the Apache include editor under Global Post Vhost: <IfModule mod_fastcgi.c> FastCGIExternalServer /usr/local/sbin/php-fpm -host 127.0.0.1:9000 AddHandler php-fastcgi .php Action php-fastcgi /usr/local/sbin/php-fpm.fcgi ScriptAlias /usr/local/spin/php-fpm.fcgi /usr/local/sbin/php-fpm <Directory /usr/local/sbin> Options ExecCGI FollowSymLinks SetHandler fastcgi-script Order allow,deny Allow from all </Directory> </IfModule> But I'd like to find a way to implement php running under the user, but sharing the pool. I manage and control all the domains that run under the pool so I'm not concerned about security of files per account, I just need to make sure all scripting can be executed by the user who owns the files, instead of needing to change file permissions for each account, or having to create tons of vhost include files.

  Read the article

• Nearest PC equivalent to Mac Target Disk Mode?

  - by username

  Mac firmware has a special boot mode that allows you to offer its internal hdd to another computer as an external disk (you just connect the two machines via an IEEE 1394 cable). Only the second machine needs a functioning OS installed. Any good suggestions for something similar on the PC side of things? Block level access isn't important to me, I'd just like to be able to copy files off it. It doesn't matter to me if it uses Ethernet, IEEE 1394, or wifi - I just like having a quick way to access files on a client PC. Is there any single-purpose Linux distro specially designed to do this? It'd be nice to have something super simple, quickbooting, and small that I could install on a USB drive. I used to use Knoppix, but it's overkill as a Target Mode replacement.

  Read the article

• Tutuorial for Quick Look Generator for Mac

  - by vgm64

  I've checked out Apple's Quick Look Programming Guide: Introduction to Quick Look page in the Mac Dev Center, but as a more of a science programmer rather than an Apple programmer, it is a little over my head (but I could get through it in a weekend if I bash my head against it long enough). Does anyone know of a good basic Quick Look Generators tutorial that is simple enough for someone with only very modest experience with Xcode? For those that are curious, I have a filetype called .evt that has an xml header and then binary info after the header. I'm trying to write a generator to display the xml header. There's no application bundle that it belongs to. Thanks!

  Read the article

• Customizable mail server - what are my options? [closed]

  - by disappearedng

  This question was originally on SO but it was closed since it is considered off topic. I am interested to build a mail service that allows you to incorporate custom logic in the your mail server. For example, user A can reply to [email protected] once and subsequent emails from user A to [email protected] will not go through until certain actions are taken. I am looking for something simple and customizable, preferably open-sourced. I am fluent in most modern languages. What email servers do you guys recommend for this? Mailgun looks promising, but are there any simpler options?

  Read the article

• Two network interfaces and two IP addresses on the same subnet in Linux

  - by Scott Duckworth

  I recently ran into a situation where I needed two IP addresses on the same subnet assigned to one Linux host so that we could run two SSL/TLS sites. My first approach was to use IP aliasing, e.g. using eth0:0, eth0:1, etc, but our network admins have some fairly strict settings in place for security that squashed this idea: They use DHCP snooping and normally don't allow static IP addresses. Static addressing is accomplished by using static DHCP entries, so the same MAC address always gets the same IP assignment. This feature can be disabled per switchport if you ask and you have a reason for it (thankfully I have a good relationship with the network guys and this isn't hard to do). With the DHCP snooping disabled on the switchport, they had to put in a rule on the switch that said MAC address X is allowed to have IP address Y. Unfortunately this had the side effect of also saying that MAC address X is ONLY allowed to have IP address Y. IP aliasing required that MAC address X was assigned two IP addresses, so this didn't work. There may have been a way around these issues on the switch configuration, but in an attempt to preserve good relations with the network admins I tried to find another way. Having two network interfaces seemed like the next logical step. Thankfully this Linux system is a virtual machine, so I was able to easily add a second network interface (without rebooting, I might add - pretty cool). A few keystrokes later I had two network interfaces up and running and both pulled IP addresses from DHCP. But then the problem came in: the network admins could see (on the switch) the ARP entry for both interfaces, but only the first network interface that I brought up would respond to pings or any sort of TCP or UDP traffic. After lots of digging and poking, here's what I came up with. It seems to work, but it also seems to be a lot of work for something that seems like it should be simple. Any alternate ideas out there? Step 1: Enable ARP filtering on all interfaces: # sysctl -w net.ipv4.conf.all.arp_filter=1 # echo "net.ipv4.conf.all.arp_filter = 1" >> /etc/sysctl.conf From the file networking/ip-sysctl.txt in the Linux kernel docs: arp_filter - BOOLEAN 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. arp_filter for the interface will be enabled if at least one of conf/{all,interface}/arp_filter is set to TRUE, it will be disabled otherwise Step 2: Implement source-based routing I basically just followed directions from http://lartc.org/howto/lartc.rpdb.multiple-links.html, although that page was written with a different goal in mind (dealing with two ISPs). Assume that the subnet is 10.0.0.0/24, the gateway is 10.0.0.1, the IP address for eth0 is 10.0.0.100, and the IP address for eth1 is 10.0.0.101. Define two new routing tables named eth0 and eth1 in /etc/iproute2/rt_tables: ... top of file omitted ... 1 eth0 2 eth1 Define the routes for these two tables: # ip route add default via 10.0.0.1 table eth0 # ip route add default via 10.0.0.1 table eth1 # ip route add 10.0.0.0/24 dev eth0 src 10.0.0.100 table eth0 # ip route add 10.0.0.0/24 dev eth1 src 10.0.0.101 table eth1 Define the rules for when to use the new routing tables: # ip rule add from 10.0.0.100 table eth0 # ip rule add from 10.0.0.101 table eth1 The main routing table was already taken care of by DHCP (and it's not even clear that its strictly necessary in this case), but it basically equates to this: # ip route add default via 10.0.0.1 dev eth0 # ip route add 130.127.48.0/23 dev eth0 src 10.0.0.100 # ip route add 130.127.48.0/23 dev eth1 src 10.0.0.101 And voila! Everything seems to work just fine. Sending pings to both IP addresses works fine. Sending pings from this system to other systems and forcing the ping to use a specific interface works fine (ping -I eth0 10.0.0.1, ping -I eth1 10.0.0.1). And most importantly, all TCP and UDP traffic to/from either IP address works as expected. So again, my question is: is there a better way to do this? This seems like a lot of work for a seemingly simple problem.

  Read the article

• CentOS listen to everything on the wire

  - by Poni

  I know there's a native command on linux that will output (to stdout) every "event" related to a certain network interface (be it eth0 etc'). Like there's tail -f <file> to listen on file changes.. I just can't find it. I want to see all events, incoming packets, even dropped ones. At lowest level possible. In every protocol (TCP, UDP etc'). I think WireShark is a bit too big for this as I need something very simple just to see the events, it's for testing. What's the command?

  Read the article

• selective backup script in bash

  - by Sake

  Hi, I've been using this simple command (that's all I can do :) to backup the whole tree from my user data in NAS server for a year. cp -r /STORAGE /BACKUP-STORAGE/YYYY-MM-DD Unfortunately, after a year of service. My user start filling the spaces with lot of photo and cliparts (jpg, gif, bmp) And that start to make my backup process get much slower. The space is also a big issue. Now I no longer have enough space for a week-long daily backup set. I think I want to change from backup everything to backup only non-image data. How can I exclude jpg, gif, and bmp from the backup ? It's quite easy with DOS XCOPY command, but I really have no idea how to do that in bash. Thanks

  Read the article

• How to pass custom options to configure when building a package with debuild?

  - by TestUser16418

  Short background: I'm using Debian Sid. Currently the audacity package is conflicting with the pidgin package, because gstreamer0.10-plugins-bad are outdated. I'm trying to rebuild it, but one of the unit tests is failing as one plugin I don't need is causing a segfault. I need to disable these tests, and there's a configure option for that, but I don't know how to pass it. So, how can I run configure with custom options? Either by passing them to debuild, or by editing some file in the debian directory? I only worked with Gentoo ebuilds so far, which are extremely simple compared to the Debian control files, which I still find completely undecipherable.

  Read the article

• Run a BitLocker protected Windows 7 installation on VirtualBox from physical drive

  - by djechelon

  I have a broken laptop with its hard drive intact. I'll be getting it repaired in a few days but I must continue my work possibly uninterrupted, so I chose to run the OS in another working laptop (I can't just transfer documents). My question is really simple: Can I create a virtual machine in VirtualBox (under Linux) that uses the physical hard drive mentioned above which is encrypted with BitLocker? I have the restore key at hand, of course. I wouldn't like to mount the hard disk as primary hard disk for laptop (and run 7 as primary OS), but that could be the final choice if virtualizing is not an option. Thank you.

  Read the article

• Rails deployment questions

  - by Meltemi

  Getting ready to deploy a rails project on Mac OS X Server (10.5 - Leopard). Got a few questions for someone with Rails experience: where should directory containing the project go? inside the website's root folder or out? who should "own" that directory? www? root? something/someone else? hope to continue serving static pages via Apache... would like rails app to be served by mydomain/xxx/railsapp. is there a standard name people us for 'xxx'? not expecting too much traffic to begin with...just like to keep things as simple as possible.

  Read the article

• dead man's switch for remote networking interventions

  - by ascobol

  Hi, As I'm going to change the network configuration of a remote server, I was thinking of some security mechanisms to protect me from accidentally loosing control on the server. The level-0 protection I'm using is a scheduled system reboot: # at now+x minutes > reboot > ctrl+D where x is the delay before reboot. While this works relatevly well for very simple tasks like playing with iptables this method has at least two drawbacks: It's not very reactive, ie a connectivity problem should be detected automatically if for example an automatic remote ssh command fails does not work anymore for x seconds. It can obviously not work if one need to modify some configuration files and then reboot to test the changes. Are you guys using some tool for the second point ? I would love to have something able to revert the system configuration in a previously known stable state if I can't join the server X minutes after reboot. Thanks!

  Read the article

• www.domain.com and domain.com records in microsoft dns

  - by captainmish

  Hello Apologies if this is already answered, its a tricky one to search for! We are using split DNS for a domain used internally. For the outside nameservers, theres a simple zone with: @ IN A ip.ad.dr.ess www IN A ip.ad.re.ss This works fine externally. Internally its a windows server 2003 DNS server, so the www a record works fine, but I cant figure out how to add that primary record (using at symbol @ in bind). Can anyone help with how to get the same results from windows dns? I just want to be able to add a record for domain.com without being forced to use something.domain.com Thanks, Edit: This domain is not the "main" AD domain, and not used for logins etc.

  Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >