Search Results

Search found 19499 results on 780 pages for 'transaction log'.

Page 496/780 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

  • Networking not working in Windows 7 - "The account specified for this service is different from the account specified for other services"

    - by tog22
    I have a homebuilt computer with a GA-Z68MA-D2H-B3 motherboard with a Realtek RTL8111E LAN chip. Ethernet was working fine in Windows 7 until I reinstalled this OS, but now it's stopped, while still working in other OSes. I've tried reinstalling drivers from both the Gigabyte and Realtek sites to no avail; I've also plugged in and installed an Asus USB-N13 wifi dongle and this doesn't work oddly. How can I diagnose and fix this issue? In 'Network and Sharing Center' says "The account specified for this service is different from the account specified for other services running in the same process" under the heading 'Unknown'. Following the advice at http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html#post1122627 I've gone to 'Control Panel= Admin Tools= Services' and ensured the services listed at that URL are started (one - IIRC 'Come+ Event System' refused to start as user 'Local services' so I've had to set it to log on with the 'Local system account'... I suspect this may be part of the problem).

    Read the article

  • Why does WebDAV fail from inside home network

    - by Claus
    On my OSX server there is a folder that is configured in the Server App to be accessible via WebDAV. This folder is used to sync OmniFocus. On my router, I have set up a dynamic dns. When I am outside my home network (physically away or when connected via a vpn), I can connect and sync fine via: https://<server name from dyndns>/<username>/<path to WebDAV folder> However, when I am in my home network, the connection to WebDAV does not work (other connections, AFP, f.ex, do work). What could be some reasons why I can't connect to WebDAV from within my home network? What log files could give hints and where are they stored? I am running OSX server 10.9.3. and server.app. Thanks for your help.

    Read the article

  • Change desktop background at school

    - by Nano8Blazex
    On school computers, I can log in with a user account stored on the school network (something like that, I have no experience in networking and this sort of stuff). Everything is fine and dandy and totally works as it should, but there is one thing that I find annoying. Apparently for some reason I can't change my background to anything more than a couple of different solid colors with our school's logo still stuck in the middle. (the original background is a white logo on black background. If I change it to a different color, the central 6x6 inch black/white logo still remains, only the surrounding color is changed.) It may have been set by school administrators or something, I don't really know. I find this really ugly. Is there any way to change a setting so that I can set the background to any picture I wish? (like on a home pc...) Thanks.

    Read the article

  • can Snort be installed on VPS?

    - by jack
    Hi Linux Admins I want the maximum security for my linux vps. I found many tutorials round the net but it doesn't cover the Snort. Only those like portentry, logsentry, tripwire and so on. So I'm beginning to think that Snort is not appropriate for a linux host. I think it's suitable only as a proxy/middle-man that checks traffic before passing to acutual targets. I'd like to whether Snort can be installed on VPS which serves typical servers like web/mail. Can Snort be in complict with OSSEC which I think it doesn't check the traffic but the log files only for Intrusion Detection/Anomaly? Thank you.

    Read the article

  • Windows scheduled task not running

    - by Ravi Kumar Singh
    I have several SQL server backups on a server. I have created a batch file which then copies these to network drives. These are mapped to the server, and it works properly. Now, I've created a scheduled task to do this. If I select "run the task when logged in", I can test the task. It works fine. However I cannot test it with the other option "run task if logged in or not". I've read that testing this task is not possible manually. However the task runs when we log off the server automatically.

    Read the article

  • CodePlex Daily Summary for Wednesday, October 17, 2012

    CodePlex Daily Summary for Wednesday, October 17, 2012Popular ReleasesD3 Loot Tracker: 1.5.5: Compatible with 1.05.Test Management eXtensions PowerShell module: TMX 0.4.5: Bugfix in BackUp-TMXTestResults: 1. adding escape characters to sring data (at least, part) 2. ErrorRecord is now supported as a string Known issue: only one screenshot per test result.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Global Stock Exchange (Hobby Project): Global Stock Exchange - Invst Banking (Hobby Proj): Initial VersionMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring nugget package http://nuget.org/packages/Magelia.Webstore.Client burst optimisation burst time improvment (multithreading, index, ...) current burst is still active when a new burst is generating bugfixes version 2.1.254.1RazorSourceGenerator: RazorSourceGenerator v1.0 Installer: RazorSourceGenerator v1.0 InstallerJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...VFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...ALM Assessment Guidance: Community Value-Adds: Important: This download has been created using ALM Ranger bits by the community, for the community. Although ALM Rangers were involved in the process, the content has not been through their quality review. Please post your candid feedback and improvement suggestions to the Community tab of this Codeplex project. DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.70: Fixed issue described in discussion #399087: variable references within case values weren't getting resolved.GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. Update 14.Oct.2012 - Client side access fixed NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:Goog...mojoPortal: 2.3.9.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2393-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...New Projects1327on17jabbr: helloAESP: Projeto AESPAutoStor: Egyetemi kurzus keretében megvalósuló alkalmazás, melynek célja egy automatikus raktározó rendszer szimulációja, objektum-orientált megvalósítással.BetterPlaceBooking: 3rd semester project for DM76 Group 3BizMate: BizMate is a Web based Accounting systemDeneme: deneme yazisiDomainSharp: Integrated development environment for design of domain-specific languages and subsequent development in such languages.EasyTwitter: EasyTwitter it's a simple .NET library where you can use twitter in your web applications or win forms applications. EasyTwitter stills in developmentEDM Designer Extender: Entity Framework Designer Extender that provides new design time properties and a template item to generate DbContext classes.Formition Password Safe (Open Source): Formition Password Safe (Open Source) for Windows 7 is a free high functionality password tool to manage your passwords and other pieces of information.g1p2_web: sport club web site based on c# and mssqlGibbsLDASharp: GibbsLDASharp is a C# implementation of Latent Dirichlet Allocation (LDA) using Gibbs Sampling technique for parameter estimation and inference. Intelligent Assistant Soccer Manager: Intelligent Assistant Soccer Manager, or IASM for short, is a decision support system that fully support condition based deploy of Fantacalcio® soccer teamIshaanOnDAL: Creating DAL Using class ObjectKeks - A 2D Graphics Engine in Java (jre7): Keks is an upcoming Java 2D Graphics Engine with the promise to become a Game Engine in the future.LDR Installer: LDR Installer to easily install security updates in hotfix mode.Live SDK with C# + REST: Usar Live SDK com API REST em qualquer sabor de windows. Use Live SDK with REST API in any flavor of windows.MacSonuclari: project to show soccer match result to for windows phone devices mozcms: mozcms for .NET 4.0 MVC 4.0!MS_Descriptions_Changer: This is utility change MS_Descriptions attribute on MS SQL Server 2005-2008 for Tables and Columns.Onestop.Contrib.DistributedEvict: Onestop.Contrib.DistributedEvict is an advanced module that has 2 primary features for managing cache in a web farm: Output Cache Evict & Remote SignalsOrchard Scripting Extensions: Core module for running scripts inside Orchard.Orchard Scripting Extensions: PHP: A child module for Orchard Scripting Extensions for running PHP code inside Orchard.Page Generated Skin Object for DotNetNuke: The Page Generated Skin Object for DotNetNuke displays the time taken to generate the current page in your custom DNN skin. ProductStore: this project is demo for mvc4, ef codefirst...Remote Controlled Switch for all RC Receivers.: AVR Tiny based simple switch for any rc receiver. Allows to turn off / on lights, sound effect, retracts chassis, using free servo channel. Report Generator in C#: This is a library used to generate reports.Resharper text localization add-in: Text localization plugin for Resharper 7.0 and some plugins development documentationRoad Addicts: Road Addicts is a mix between a strategy and a traffic simulation game.Sistema Distribuido de Pedidos de Insumos Médicos: This is school projectSplitOS: SplitOS - The user-friendly Text OSSQL Server Connection Auditor (SSCA): SSCA helps you test your database audit solution's effectiveness at auditing Microsoft SQL Server connections by automating DB connections, results, and logs.TCP Cellular Radio Driver: Addresses TCP mode shortcomings in the CellularRadio driver provided by GHI Electronics for the Seeed module. Allows transparent data connection over TCP.test1325on17: hellotesttom10162012git01: fds fdsUMK Game: Game Edukasi 3D Tatatertib LalulintasWebMatrix Extension Documentation - Staging: WebMatrix Extensión Development ServiceWhipstaff: Whipstaff is a PoC library for designing a common UI library leveraging WPF, ReactiveUI and DHGMS Data Manager. It is written in C#Windows 8 Store Apps - Tutoriales Paso a Paso: No hay mejor forma de aprender a escribir código, que leyendo código de otros. Conocé aquí tutoriales completos para crear tu primer app para Windows 8 Store. Yet Another Expression Parser - Reverse Polish Notation - C#: Following project contains a class library with simple Reverse Polish Notation implementation.

    Read the article

  • Better Method of Opening TTY Permissions

    - by VxJasonxV
    At work, I have a few legacy servers that I log into as root, and then su down to a user. I continue to run into an issue where after doing so, I am unable to run screen as this user. I don't want to open screen as root, because then I have to consciously su down the user every new shell, and I often forget. The question is, is there an easier resolution to this than I'm currently aware of? My current solution is to find my terminal pts number, then set it chmod 666. I'm looking for something akin to X11's xhost ACL management, if such a thing exists for this situation.

    Read the article

  • How do I identify which rewrite rule is being trigger on IIS 7.5?

    - by Jordan Reiter
    I have a set of rewrite rules (offhand, I would say around 40-50) for a given server. It's basically to handle and reroute mangled URLs so that bad links still go to where they're supposed to go. I've come across an URL that is redirecting and I can't figure out which rewrite rule it is applying. My background is Apache and in that case I'd simply enable a rewrite log and look at the logged output to figure out what was happening. Is there an equivalent way to do this in IIS? bonus round Any way for me to view & edit the rewrite rules in a text file rather than the GUI interface?

    Read the article

  • How to redirect (or Alias) jump page with Apache

    - by Meltemi
    I'm not an Apache expert but need to make a small change to a web server. We are introducing a "jump page" URL that is different from a primary URL (for tracking reasons). /productA/index.html /productA/jump_index.html Basically i want to log that jump_index.html was requested and then return index.html. I don't want the client to wait 8 seconds or so for a redirect. How should we be handling this? Simply symlink (or alias) the file in the filesystem? Use mod_alias Alias Match (if so how exactly)? something better still?

    Read the article

  • My profile won't load!

    - by blsub6
    I can get into my Windows Server 2008 R2 primary domain controller via remote desktop just fine. It's my boss who's got his profile messed up. When he tries to log in, he gets the message The User Profile service failed the logon. User profile cannot be loaded. I've looked for his profile everywhere and cannot find it to delete or fix it. System Properties Advanced User Profiles shows my profile, the Administrator profile and the Default Profile. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList only shows my profile and the Administrator profile. Everything that I've found on the internets points me to those locations. Help a brotha out?

    Read the article

  • How should I deal with user agent parsing in logs?

    - by Mr. Jefferson
    My web app project includes logging functionality so we can see where visitors are coming from (referrer URL), what the popular user agents are, what pages are most popular, etc. The log is stored in SQL Server, and when I query the user agents I use a large (almost 100 lines) and growing CASE statement to separate the user agents using string matching (i.e. if the user agent contains the string "Firefox/9" then it's Firefox 9). Is there a better way to do this so I don't have to continually add to that CASE statement to deal with new browser releases? Also, how should I deal with less common, weird/unknown user agents? I've seen the following in the logs and been unable to find good information online about what they are: WordPress/3.3.1; http://www.facecolony.org Mozilla/4.0 ( http://www.hairirons.org redips; <a href=http://hairirons.org/>chi hair iron</a>) I'd guess they're bots/crawlers, but the sites they point to don't appear to reference web crawlers (or even be available sometimes). I've seen other user agents aren't familiar to me, but I know they're bots because they include "bot" or "spider" or something similar in them.

    Read the article

  • mapping server 2008 network drive to vista home premium x64

    - by rboorgapally
    Hi, We have a windows server 2008 box at my work place. I want to map a drive from the server to my laptop. I use windows vista home premium x64. I am connected to my workplace through VPN. i can map the drive when I use the administrator account on the server. But the log on is unsuccessful if I use my personal account on the server to map the drive. My personal account on the server is part of Administrators group. Can any one help me with this?

    Read the article

  • Can I port forward to an established reverse ssh tunnel

    - by Ben Holness
    I have three computers, A, B and C A has initiated a reverse ssh tunnel to B: ssh -nTNx -p 443 -R 22222:localhost:22 [user]@[server] If I log in to B, I can use 'ssh -p 22222 localhost' and I get a login prompt for A. If I try 'ssh -p 22222 [public IP of B]', it doesn't work What I would like to be able to do is have C connect to A without needing to login to B. So from C I could 'ssh -p 22222 [public IP of B]' and I would get the login prompt for A. I am using debian and shorewall and I have a basic understanding of how things work. I have tried various combinations of REDIRECT and DNAT rules, but haven't had any luck. I have tried using the same port (22222) and a different port (forwarding 22223 from C to 22222 on localhost). Any ideas? Cheers, Ben

    Read the article

  • Install problems with XSendFile on Ubuntu

    - by Dan
    I installed the apache dev headers: sudo apt-get install apache2-prefork-dev Downloaded and compiled the module as outlined here: http://tn123.ath.cx/mod_xsendfile/ Added the following line to /etc/apache2/mods-available/xsendfile.load: LoadModule xsendfile_module /usr/lib/apache2/modules/mod_xsendfile.so Added this to my VirtualHost: <VirtualHost *:80> XSendFile on XSendFilePath /path/to/protected/files/ Enabled the module by doing: sudo a2enmod xsendfile Then I restarted Apache. Then this code still just provides me with an empty file with 0 bytes: file_path = '/path/to/protected/files/some_file.zip' file_name = 'some_file.zip' response = HttpResponse('', mimetype='application/zip') response['Content-Disposition'] = 'attachment; filename=%s' % smart_str(file_name) response['X-Sendfile'] = smart_str(file_path) return response And there is not in the Apache error log that pertains to XSendFile. What am I doing wrong?

    Read the article

  • Lessons From OpenId, Cardspace and Facebook Connect

    - by mark.wilcox
    (c) denise carbonell I think Johannes Ernst summarized pretty well what happened in a broad sense in regards to OpenId, Cardspace and Facebook Connect. However, I'm more interested in the lessons we can take away from this. First  - "Apple Lesson" - If user-centric identity is going to happen it's going to require not only technology but also a strong marketing campaign. I'm calling this the "Apple Lesson" because it's very similar to how Apple iPad saw success vs the tablet market. The iPad is not only a very good technology product but it was backed by a very good marketing plan. I know most people do not want to think about marketing here - but the fact is that nobody could really articulate why user-centric identity mattered in a way that the average person cared about. Second - "Facebook Lesson" - Facebook Connect solves a number of interesting problems that is easy for both consumer and service providers. For a consumer it's simple to log-in without any redirects. And while Facebook isn't perfect on privacy - no other major consumer-focused service on the Internet provides as much control about sharing identity information. From a developer perspective it is very easy to implement the SSO and fetch other identity information (if the user has given permission). This could only happen because a major company just decided to make a singular focus to make it happen. Third - "Developers Lesson" -  Facebook Social Graph API is by far the simplest API for accessing identity information which also is another reason why you're seeing such rapid growth in Facebook enabled Websites. By using a combination of URL and Javascript - the power a single HTML page now gives a developer writing Web applications is simply amazing. For example It doesn't get much simpler than this "http://api.facebook.com/mewilcox" for accessing identity. And while I can't yet share too much publicly about the specifics - the social graph API had a profound impact on me in designing our next generation APIs.  Posted via email from Virtual Identity Dialogue

    Read the article

  • Bluetooth mouse Logitech M555b not recognized on a Macbook Pro 8.2

    - by Pierre
    I just bought a Logitech M555b Bluetooth mouse today. My computer (a Macbook Pro 8,2) has a bluetooth connection, and it works perfectly fine on Mac OSX (I set up a new device, click the connect button on the mouse, and voilà, done in 5 seconds). I cannot get it to work on Ubuntu 12.04. When I follow the same steps as on Mac OSX under Ubuntu 12.04, Sometimes I will see the mouse name appearing for 1 second on the screen, and if I'm fast enough to click on "Continue", I will have a message telling me the pairing with my mouse failed. Here are the steps I follow: Turn off Bluetooth on Ubuntu Turn Bluetooth on. Bluetooth icon Set up new device... Turn on the mouse, and press the Connect button. Press "Continue" on the Bluetooth New Device Setup screen I see the mouse name for one second, but then it disappear. Click on PIN options... to select '0000'. ... nothing, Ubuntu won't see anything. In the /var/log/syslog, I have the following information: May 27 23:26:16 Trane bluetoothd[896]: HCI dev 0 down May 27 23:26:16 Trane bluetoothd[896]: Adapter /org/bluez/896/hci0 has been disabled May 27 23:26:58 Trane bluetoothd[896]: HCI dev 0 up May 27 23:26:58 Trane bluetoothd[896]: Adapter /org/bluez/896/hci0 has been enabled May 27 23:26:58 Trane bluetoothd[896]: Inquiry Cancel Failed with status 0x12 May 27 23:28:26 Trane bluetoothd[896]: Refusing input device connect: No such file or directory (2) May 27 23:28:26 Trane bluetoothd[896]: Refusing connection from 00:1F:20:24:15:3D: setup in progress May 27 23:28:26 Trane bluetoothd[896]: Discovery session 0x7f3409ab5b70 with :1.84 activated I tried for an hour, I restarted my computer, re-paired the mouse on Mac OSX, etc. Sometimes when I restart the computer, I have a dialog box showing up saying that the mouse M555b wants to access some resources or something, if I click "Grant", or even if I tick "always grant access", nothing happens... How can I get the Bluetooth to work properly? Help!

    Read the article

  • How to see who is using my wifi

    - by Bakhtiyor
    Dear all. Such a question. I have WiFi router at home and would like to know if there is any way to know who is connected to my WiFi network and using it. My WiFi network is password protected but still there could be chances that neighbors crack it and could use my WiFi for free. For this reason I would like to know is there is any tool to inspect the log of WiFi router in order to know which computers are connecting to it. Thanks a lot beforehand.

    Read the article

  • testing ssl cert for smtps => "secure connection could not be established with this website"

    - by cc young
    testing ssl cert on server using a web service. https, imaps and pop3s all check, but smtps yields the message "we advise you not to submit any confidential or personal data to this website because a secure connection could not be established with this website." running postfix tls logging: connect from s097.networking4all.com[213.249.64.242] lost connection after UNKNOWN from s097.networking4all.com[213.249.64.242] disconnect from s097.networking4all.com[213.249.64.242] these work correctly: telnet mydomain.net 587 openssl s_client -starttls smtp -crlf -connect mydomain.net:587 but cannot get email using ssl to log into either 587 or 564 - get same "UNKNOWN" problem. email smtp w/o ssh works fine. the test site is http://www.networking4all.com/en/support/tools/site+check/

    Read the article

  • Visible Keylogger (ie not evil)

    - by Ben Haley
    I want keylogging software on my laptop for lifelogging purposes. But the software I can find is targeted towards stealth activity. Can anyone recommend a keylogging software targeted towards personal backup. Ideal Functionality Runs publicly (like in the task bar). Easy to turn off (via keyboard shortcut is best... at least via button click) Encrypted log Fast Free Cross platform ( windows at least ) The best I have found is pykeylogger which does not attempt to be stealthy, but does not attempt to be visible either. I want a keylogger focused on transparency, speed, and security so I can safely record myself. *note: Christian has a similar question with a different emphasis

    Read the article

  • How do you disable SMB printing support?

    - by evilpenguin
    Hi, I'm running CentOS on a storage server that has to do file sharing for with Windows machines. SMB version is smbd version 3.5.5-68.fc13 I'm getting a lot of error messages in /var/log/messages regarding failed attempts to connect to a CUPS server. They look like this: Nov 30 18:49:34 big03 smbd[9927]: [2010/11/30 18:49:34.850620, 0] printing/print_cups.c:108(cups_connect) Nov 30 18:49:34 big03 smbd[9927]: Unable to connect to CUPS server localhost:631 - Connection refused I understand that the issue is generated by the fact that SMB comes with printer sharing support, but I'm really not interested in that. I just want to disable the feature to get rid of the messages. Any idea how I can do that?

    Read the article

  • What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

    - by Dr. Zim
    Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

    Read the article

  • Group policy issues

    - by Alex Berry
    We are having an issue on one of our clients relatively new sbs installs. The domain consists of a single SBS 2011 server with 4 windows 7 clients and 3 xp clients. Most of the time everything is fine however roughly every 3 days windows 7 clients start timing out when trying to receive computer group policy. This results in hour long delays before getting to the login screen in the morning. This is accompanied by event ID 6006, win login errors stating it took 3599 seconds to process policy. Once they've booted they can log in without issue however gpupdate fails again on computer policy and gpresult comes back with access denied, even when run as domain admin... At this point if we restart the server the network is fine for 3 days. I thought perhaps it might be ipv6 or smb2, but disabling ipv6 on the clients doesn't help and the clients can browse the sysvol folder freely on smb2 anyway. Does anyone have any ideas or routes I can take to further diagnose the issue? Thanks in advance :)

    Read the article

  • Windows 7 randomly installs an "Unknown Device"

    - by Amazed
    Rarely (several days to weeks between occurrences,) and seemingly at random, I get a balloon notification from Windows 7 (x64 SP1 Home Premium) that it is installing hardware for me. However, no new hardware has been installed or plugged in! When I click the balloon it doesn't give me any useful information: Looking in the event log, I find this entry: Event ID: 20001 Source: UserPnp Task Category: 7005 Message: Driver Management concluded the process to install driver FileRepository\usb.inf_amd64_neutral_153b489118ee37b8\usb.inf for Device Instance ID USB\VID_0000&PID_0000\6&3AF9A177&0&0060&&02 with the following status: 0x0. It appears to be USB related. My motherboard has both USB 2.0 and 3.0 controllers. My keyboard and mouse are plugged into the 2.0 slots and the data/recharge cable for a tablet (but not the tablet itself) was plugged in to the 3.0 slot. No other USB devices have been attached for several days/reboots. Why is Windows doing this?

    Read the article

  • Cutting users off in Windows console sessions

    - by RoRy
    I'm currently working in a company where many of us log onto hosts/servers under Windows Server 2008 via console session. If one person is logged on and another tries it causes the person who was logged on first (and maybe doing something important) to be cut off. Is there such a thing as an application for such events where before logging on people can see if any other IP address is controlling the host/server? Also, if the person on the console session had the ability to leave a note for anybody thinking of taking over the session of when they are finished etc.. I have many other ideas for such things but could someone tell me if such an application exists?

    Read the article

  • fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

    - by d0nd
    Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

    Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >