Search Results

Search found 54052 results on 2163 pages for 'run configuration'.

Page 497/2163 | < Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >

• Diagnosing laptop charging issues

  - by Ben

  My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

  Read the article

• debian squeeze: where do the logs for sysv init scripts go? (why won't my init script work)

  - by sbeam

  my actual problem is trying to debug a init script to start Resque. It works fine run as root from the command line, but does nothing on boot. It has some proper insserv headers and I've run updaterc.d to create the symlinks, and checked that they exist. The script is +x. # find /etc/rc*.d -name \*resque\* /etc/rc0.d/K01resque /etc/rc1.d/K01resque /etc/rc2.d/S01resque /etc/rc3.d/S01resque /etc/rc4.d/S01resque /etc/rc5.d/S01resque /etc/rc6.d/K01resque # ls -l /etc/init.d/resque -rwxr-xr-x 1 root root 2093 Oct 24 03:02 /etc/init.d/resque the script can be viewed here if you like. It uses lsb functions to log messages, which essentially echo() to STDOUT I believe. So where does the output go during startup? It's not in /var/log/*log

  Read the article

• mkisofs - Floppy Image to Disk Image

  - by CommunistPancake

  I'm trying to compile MikeOS on windows. I've successfully (I think) created a floppy (.flp) image of the operating system. I want to convert it to a disk image (.iso) so I can run it in virtual box. I've tried mkisofs -quiet -V 'MIKEOS' -input-charset iso8859-1 -o disk_images/mikeos.iso -b mikeos.flp disk_images/ Which is the command in the Linux build script. It does create an ISO image, but when I try to run in in VirtualBox, I get a black screen. What am I doing wrong? Here's my build script.

  Read the article

• Application usage report on XenApp 6

  - by Garrett

  We just deployed the latest Citrix XenApp 6 onto Server 2008 R2, and we'd like to run an application usage report. I've googled around, but all the how-to's seem to be aimed at XenApp 5 and lower, when apparently it was much easier. I came across this Citrix expert thread: http://forums.citrix.com/thread.jspa?threadID=265554 Which gives a powershell command, Get-XAApplicationReport, but when I run that on our Citrix Server in PS2 it says it's not recognized. Do I need to register the Citrix commands in PS some how? Is there a better way to generate the application usage report?

  Read the article

• multiple php compiler on single apache installation

  - by getmizanur

  elloo, i have some old php scripts which runs on php-5.2.x and the current server has php-5.3.x. to get around this problem,i have got two options one is to downgrade php-5.3.x or install php-5.2.x and php-5.3.x at the same time where php-5.2.x serve cgi script. i have decided go for the second option i have followed this tutorial and i can get most of it working however except execution of shell script which selects php-cgi version. i cannot get apache to execute this script. how do i get apache to execute #!/bin/sh # you can change the PHP version here. version="5.2.6" # php.ini file location, */php-5.2.6/lib equals */php-5.2.6/lib/php.ini. PHPRC=/etc/php/phpfarm/inst/php-${version}/lib/php.ini export PHPRC PHP_FCGI_CHILDREN=3 export PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=5000 export PHP_FCGI_MAX_REQUESTS # which php-cgi binary to execute exec /etc/php/phpfarm/inst/php-${version}/bin/php-cgi my apache vhost.conf <VirtualHost *:80> ServerName 526.localhost DocumentRoot /home/getmizanur/public_html/www <Directory "/home/getmizanur/public_html/www"> AddHandler php-cgi .php Action php-cgi /php-fcgi/php-cgi-5.2.6 </Directory> </VirtualHost> can some one tell me what am i doing wrong? thanks in advance. solution: if i did a2dismod php5 then the above configuration worked. when a2enmod php5 had been activated, apache was executing php5.3 instead of php5.2 even after telling apache to execute php5.2 shell script. to solve my problem, i had to change my virtualhost configuration <VirtualHost *:80> ServerName 526.localhost DocumentRoot /home/getmizanur/public_html/www DirectoryIndex index.php <Directory "/home/getmizanur/public_html/www"> AddHandler php-cgi .php Action php-cgi /php-fcgi/php-cgi-5.2.6 <FilesMatch "\.php"> SetHandler php-cgi </FilesMatch> </Directory> </VirtualHost> presto, it started working.

  Read the article

• [Ubuntu 10.04 Desktop] Unable to get Webmin or Vboxdrv to auto start on boot

  - by Matthew Hodgkins

  Ever since installing Ubuntu 10.04 I've had issues getting things to auto-start. I have installed webmin and VirtualBox but every time I reboot I have to manually run: sudo /etc/init.d/webmin start sudo /etc/init.d/vboxdrv start I have run: sudo update-rc.d -f webmin remove and then hodge@hodge-fs:~$ sudo update-rc.d webmin defaults update-rc.d: warning: webmin start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (2 3 5) Adding system startup for /etc/init.d/webmin ... /etc/rc0.d/K20webmin -> ../init.d/webmin /etc/rc1.d/K20webmin -> ../init.d/webmin /etc/rc6.d/K20webmin -> ../init.d/webmin /etc/rc2.d/S20webmin -> ../init.d/webmin /etc/rc3.d/S20webmin -> ../init.d/webmin /etc/rc4.d/S20webmin -> ../init.d/webmin /etc/rc5.d/S20webmin -> ../init.d/webmin But it they still refuse to start on boot. Any ideas?

  Read the article

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• DD-WRT router causing IP address conflicts across network

  - by r.tanner.f

  My DD-WRT router has lost its mind! I just set up two DD-WRT routers, one as a WAP (working fine) and one in Client Bridge (routed) mode (the problem). Not long after setup I started seeing IP address conflicts on other machines. The event log always points the finger at my Client Bridge router's MAC address. Neighbour table overflow The log on my router is flooded with Neighbour table overflow errors. These start a minute or two after boot. The network is rather large, with +200 IP addresses being used in this subnet. The other router shows no such errors. Mass ARP requests from 1.1.1.1 I'm also seeing constant ARP requests (with the problem router's MAC address) from 1.1.1.1. Seems like it's bugging everything on the network for its MAC address and then promptly forgetting it (or never receiving a response). Configuration: Model: Buffalo N600 Firmware: DD-WRT v24SP2-MULTI (03/21/11) Wireless Mode: Client Bridge (routed) I'm not sure what configuration details are relevant and I'd rather not have comments flooded, so just ping me in this chat if you want to know something. Why is my router stealing IP addresses and how can I stop it?

  Read the article

• Scheduled task to map a network drive runs, but doesn't map the drive

  - by bikefixxer

  I have a task set up to run whenever the computer is logged onto that deletes all network folders and maps a network drive. Here is what is in the batch file: @echo off net use * /delete /y net use b: \\Server\Share /user:DOMAIN\Username password exit When the computer is restarted or logged off and back on, the task runs fine (according to the scheduled tasks window saying when it ran last) but the mapped drive doesn't show up. I'll open the command prompt and type "net use" and it simply says "There are no entries in the list". If I then right click on the task and run it, it works and the mapped drive shows up. I've checked the log and nothing shows up. I've tried adding a timer in the batch file so it waits 10 seconds (ping 1.1.1.1 -n 1 -w 10000nul) thinking that maybe the network wasn't connected, but that didn't work. What else can I try? Thanks!

  Read the article

• installing old MySQL client libraries (libmysqlclient.so.15, libpq.so.4)

  - by Elijah Paul

  I'm attempting to install Nagios plugins on a Zimbra 8.0.2 server running CentOS 6.4, but have run into the following error when I run yum install nagios-plugins-all Error: Package: nagios-plugins-mysql-1.4.15-2.el5.x86_64 (epel) Requires: libmysqlclient.so.15()(64bit) Error: Package: nagios-plugins-pgsql-1.4.15-2.el5.x86_64 (epel) Requires: libpq.so.4()(64bit) Error: Package: nagios-plugins-mysql-1.4.15-2.el5.x86_64 (epel) Requires: libmysqlclient.so.15(libmysqlclient_15)(64bit) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest How can I install these libraries (libmysqlclient.so.15 & libpq.so.4)? Will installing these libraries possibly break Zimbra?

  Read the article

• USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

  - by Pete Roberts

  Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

  Read the article

• Ntop monitoring - Hosts visible with no SPAN/mirroring

  - by Cory J

  I am attempting to use ntop to monitor traffic over a Cisco Catalyst switch. I was assuming that in order to see any of the traffic, I'd have to use monitor, as described here: http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml. Howver, before I did anything on the switch, I simply plugged my ntop server in and fired up ntop. To my suprise, I instantly see 3+ pages of hosts, and thousands of packets. How is ntop seeing this? I have verified that no monitoring exists on the switch (run as en): cs1.pvdc#show monitor No SPAN configuration is present in the system. My ntop server is Ubuntu 8.04, I haven't done ANY configuration, I just installed the ntop package. This is also a fresh Ubuntu install. Is there anything else on my switch besides "monitor" that might cause my switch to mirror all its traffic like this? I've tried plugging ntop into different ports with the same results. UPDATE: It appears to be more then just broadcast traffic showing up in ntop, for example, I can see when my IPs have talked to the DNS server or generated HTTP traffic. If my switch is misconfigured, can anyone point me in the right direction towards rectify this? Not a Cisco expert.

  Read the article

• How to enable the php 5.4.x version on Mountain Lion

  - by skiabox

  I have installed the latest php version on my mountain lion system using these instructions (http://mac.tutsplus.com/tutorials/server/upgrading-the-native-php-installation-on-os-x-mountain-lion/). I even put /usr/local/bin first in my path variable, so when I run php -v at the command line I get php v5.4.x The problem is that when I run a simple script (with the phpinfo() function inside) the page tells me that I am running the old 5.3.x php version that comes pre-installed with mac os mountain lion. I even tried to restart apache, but the problem remains. Any ideas on this one? Thank you.

  Read the article

• Why do I need to set up Autologon values in registry twice in before it works and can I fix this?

  - by jJack

  Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however. Note this seems unique to Windows 7, does not occur in Windows XP Also note that you don't need PsExec to recreate the issue - just modify the registry yourself EDIT/update: Login interactively and run script (so, not executing it remotely), logging off automatically logs me back in (so, it works) remotely execute the script in guest when I'm interactively logged in, logging off automatically logs me back in (so, it works) remotely execute the script in guest when with non-interactive session if I log in afterwards (so, interactive now) then back off, it logs me back in (so, it then works) EDIT/update 2: This only occurs for Win7x86, Win7x64, Win8x64. This does not occur for Windows XP

  Read the article

• SquidProxy status:Unknow job :Squid

  - by BanKtsu

  I have an issue in Centos 6.3. I installed Squid from compressed source archives(.tar.gz), I create an /etc/init.d/squid file, that run well because I view with the command ps -aux, that is running: root 2153 0.0 0.0 8920 1536 ? Ss 13:52 0:00 /opt/squid/squid-3.2/sbin/squid squid 2155 0.0 0.0 16368 9224 ? S 13:52 0:00 (squid-1) squid 2157 0.0 0.0 3628 972 ? S 13:52 0:00 (logfile-daemon) /var/log/squidserver/access.log This service boot at start because I configurate it with chkconfig chkconfig --list|grep squid squid 0:off 1:off 2:on 3:on 4:on 5:on 6:off The only issue that i have is when i run the command service--status-all status:Unknown job:squid why is not reconized?, what i missed?

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• pfSense command to delete stale SAD

  - by Justin Shin

  I'm experiencing an issue with pfSense where duplicate SAD's are getting created after rekeying, forcing me to manually go ahead and delete the old SAD's. It's not a huge issue but it does get to be a problem once I let it go for a few days. I just installed the cron package for pfSense so I could run a script to identify stale SAD's and delete them but I am not that familiar with BSD or pfSense. Is there a command that enumerates SAD's and their properties, and another that can delete by ID? I can form the conditional parts of the script but I do not know the commands to run. I would imagine it would be something like: Enumerate SAD's Identify Duplicate ones by matching Source and destination IP's Find the one with the larger bytes transferred Delete

  Read the article

• PostgreSQL automatic backup

  - by Ragnar123

  I have been trying to set up a backup script on a windows server. I have used pgAgent (scheduling for pgAdmin), to run the backup script. No problems with the backup script. However, my jobs are not running like they should. I have set both the schedule, and the steps. I am fairly certain, that I am running the service under a wrong user or a user without the required permissions. I run the service like this: "C:\Program Files\pgAdmin III\pgAgent" INSTALL pgAgent -u postgres -p secret hostaddr=127.0.0.1 dbname=pgadmin user=postgres And I get an error, telling me that there was an error with the login information, though I know it's correct. When I go under services (controlpanel -- administration -- services), I am able to start the service with the local user. Can this be the problem? Where can I see or change the permissions on the postgres user?

  Read the article

• How to set up IP forwarding on Nexenta (Solaris)?

  - by Gleb

  I am trying to set up IP forwarding on my Nexenta box: root@hdd:~# uname -a SunOS hdd 5.11 NexentaOS_134f i86pc i386 i86pc Solaris The box has 2 network interfaces: root@hdd:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g1: flags=1001100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,FIXEDMTU> mtu 1500 index 2 inet 192.168.12.2 netmask ffffff00 broadcast 192.168.12.255 ether 68:5:ca:9:51:b8 myri10ge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index 3 inet 10.10.10.10 netmask ffffff00 broadcast 10.10.10.255 ether 0:60:dd:47:87:2 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 192.168.12.0 is my normal LAN with 192.168.12.1 being the firewall/gateway 10.10.10.0 is a separate LAN for iSCSI (with no internet access) I want to set up IP forwarding so that a computer on 10.10.10.0 will be able to access the internet by using 10.10.10.10 as a gateway (I don't need any port forwarding) I have turned on IP forwarding: root@hdd:~# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing disabled disabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled Routing services "route:default ripng:default" Routing daemons: STATE FMRI disabled svc:/network/routing/rdisc:default disabled svc:/network/routing/route:default disabled svc:/network/routing/legacy-routing:ipv4 disabled svc:/network/routing/legacy-routing:ipv6 disabled svc:/network/routing/ripng:default online svc:/network/routing/ndp:default But when I dry to start ipnat, I get an error: root@hdd:~# ipnat -CF -f /etc/ipf/ipnat.conf ioctl(SIOCGNATS): I/O error Here is the config: root@hdd:~# cat /etc/ipf/ipnat.conf #!/sbin/ipnat -f - # map e1000g1 10.10.10.10/24 -> 192.168.12.2/32 So the question is how to fix this.. Thanks in advance!

  Read the article

• Need help creating advanced context menu command in Windows 7 (x64)

  - by Craig

  I found out about ForceBindIP and I really love it, so much that I am using it regularly enough to where spamming the same command prompt over and over again is getting painful. Here's ForceBindIP and what it does: http://www.r1ch.net/stuff/forcebindip/ I'm on a 64-bit of Windows 7 Home Premium. What I want to do is add a right-click context menu item so that when I browse items in Windows Explorer, or on my desktop, I can automate a ForceBindIP command (through the prompt). I am permanently connected to two networks: one over ethernet, and one over wireless. My ethernet network takes priority. What I want to do is add a "Run through wireless network" context menu item, that will send the item through this command: ForceBindIP {5F657824-9E3B-46E5-C21E-F52585R6457E} "[path to right-clicked file here]" It will need to run that command in C:\Windows\SysWOW64. I've no experience at all playing with the Windows registry or writing batch files, anything of that sort. I was wondering if anyone here would be kind enough to assist me?

  Read the article

• scanning only works under "sudo" (Ubuntu)

  - by JoelFan

  When I try to scan, using simple-scan, the UI says Failed to scan -- Unable to connect to scanner. When I run it from the command line I get: joel@home:/usr/bin$ simple-scan -d ** (simple-scan:6554): DEBUG: Starting Simple Scan 2.32.0.1, PID=6554 ** (simple-scan:6554): DEBUG: Restoring window to 600x400 pixels ** (simple-scan:6554): DEBUG: sane_init () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: SANE version 1.0.22 ** (simple-scan:6554): DEBUG: Requesting redetection of scan devices ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: Requesting scan at 300 dpi from device '(null)' ** (simple-scan:6554): DEBUG: scanner_scan ("(null)", 300, SCAN_SINGLE) ** (simple-scan:6554): DEBUG: sane_get_devices () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: Device: name="brother2:bus4;dev1" vendor="Brother" model="MFC-210C" type="USB scanner" ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: sane_open ("brother2:bus4;dev1") -> SANE_STATUS_IO_ERROR ** (simple-scan:6554): WARNING **: Unable to get open device: Error during device I/O FYI, I have already done: joel@home:~$ sudo chmod a+rwx /dev/bus/usb joel@home:~$ sudo chmod a+rwx /dev/bus/usb/* If I run under sudo: joel@home:~$ sudo simple-scan it works. How can I get simple-scan to work without sudo?

  Read the article

• cygwin sshd times out for remote login

  - by reve_etrange

  I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

  Read the article

• Bring internet connection to ssh target machine via tunnel?

  - by Calvin

  I have a CentOS 5 machine deep inside firewalls that's only reachable via ssh on an unconventional port, let's say 98765. I normally connect to this machine like this: ssh -P 98765 user@ip -L5900:localhost:5900 I need to run yum to install some packages on this machine, but it's not possible since the outbound ports are all closed on this machine. I want to do something like this to "bring my internet connection" to this machine: ssh -P 98765 user@ip -L5900:localhost:5900 -R80:localhost:80 -R21:localhost:21 My intention is that, when I run yum on the machine, yum will use port 80 and 21 through my originating machine. Is something like this even possible?

  Read the article

• Damaged XenServer Storage LVM partition table

  - by Fiolek

  I have a homeserver running under XenServer control with 3x1TB discs inside, one for XenServer and two mirrored(using Intel's fakeRAID and dmraid) for VMs and a user data(but now I think RAID didn't work). I tried to pass PCI card to VM using PCI-passthroug and I read somewhere that I need to recompile kernel with pciback module but something went wrong(I made mistake in /boot/extlinux.conf and server couldn't run) and I had to use LiveCD of GPartEd(I already had it on USB key) to correct this. But when I re-run the server all VDIs were gone. I have completly no idea what could go wrong. I tried to repair RAID using dmraid -R in the hope that everything will return to noramal but now I think this done more bad than good(and corrupted rest of LVM table...). Is there any possibility to recover this SR or only data from one(~100GB) of VDI? I also wants to apologise for my English, I'm not from English-speaking country and I'm only 16 years old, so I hadn't "time" to learn it(school isn't good place to do this) in sufficient way.

  Read the article

< Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >