Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 498/678 | < Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >

• File corruption when copying different file on raid 1

  - by Stephan

  I have a RAID 1 configuration of 2 1TB drives on a Fedora 12 box. Most of what is stored there are video files that are numerical labeled. The problem I'm having is that I had one of the video files get corrupted. I copied a replacement from a backup and replaced the bad file and now it works fine. However, after doing this the next numbered file goes from 350MB to 200KB and all but about .5 second of video disappears. If I then replace that file it happens to the next one down the line. Ex: Replace corrupt file 1.avi and file 2.avi shrinks to 200KB. Replace now corrupted 2.avi and it works but 3.avi gets screwed up. I have run SMART tests on the drives and they report fine. Does anyone have any tests I can run to try to figure out what is going on? EDIT: It is a two disk software RAID 1 with an ext4 filesystem

  Read the article

• Win 7 Explorer backup and long paths

  - by user53299

  I use Explorer to do backups because Win 7's backup program asks me to take backups previously done and to put them back in the drive. I am opposed to that idea since I believe backups should remain in storage. With Explorer backups (burn and burn to disc) I have encountered the "destination path too long" error message and it shows the name of a folder "Debug" three times. I have hundreds of folders named "Debug" thanks to Visual Studio. At this moment I'm too angry at Microsoft to write a program to determine my 3 longest paths. (Aside: This is all after coincidentally reading two articles about path junctions earlier this evening which already made me kind of unhappy.) Please, is there an easy way to continue to make backups with Explorer? Edit: I should add that renaming paths wrecks Visual Studio projects so I really need to isolate the small number of problem paths or find a cleaner solution.

  Read the article

• How do I get detailed information about what happens during logon

  - by Funky Si

  Due to my IT department leaving I am now responsible for all our IT systems. I now have several problems to get my head around and fix. I run Active Directory on windows server 2003 and use group policy to apply settings etc. Recently we have had some windows 7 clients added to our network, these are having awful problems with our logon scripts and drive mappings. For the most part my XP clients are working without a problem. What I want to know is what is going on during logon, as running the logon scripts after I have logged on often works. Does anyone know of a way to get detailed log information of what is happening before and during logon. Thanks for your help and any suggestions you have for tracking down the source of these problems.

  Read the article

• How can I remove OLD history from Google Chrome?

  - by Norman Ramsey

  I'm working on a laptop with a modest hard drive, and 500MB is taken up with Google Chrome "History Index" and "Thumbnails" files. Some of these files are a year old. Chrome offers me the option to remove recent history, but I want the opposite: I want to remove old history. (Ideally I would remove the least recently used history information, but I don't expect to be able to do that.) Anyone have any ideas? I'm running the standard Debian google-chrome-beta package.

  Read the article

• Solaris mounting partitions

  - by Benco

  I'm trying to mount a partition in solaris 10... bash-3.00# mount /dev/dsk/c0t0d0s3 /data mount: /dev/dsk/c0t0d0s3 is already mounted or /data is busy As far as I know c0t0d0s3 isn't already mounted elsewhere, so what's really going on here? From /etc/mnttab : /dev/dsk/c1t0d0s0 / ufs rw,intr,largefiles,logging,xattr,onerror=panic,dev=7800001285811136 /devices /devices devfs dev=4840000 1285811125 ctfs /system/contract ctfs dev=48c0001 1285811125 proc /proc proc dev=4880000 1285811125 mnttab /etc/mnttab mntfs dev=4900001 1285811125 swap /etc/svc/volatile tmpfs xattr,dev=4940001 1285811125 objfs /system/object objfs dev=4980001 1285811125 sharefs /etc/dfs/sharetab sharefs dev=49c0001 1285811125 /usr/lib/libc/libc_hwcap1.so.1 /lib/libc.so.1 lofs dev=780000 1285811131 fd /dev/fd fd rw,dev=4b40001 1285811136 swap /tmp tmpfs xattr,dev=4940002 1285811137 swap /var/run tmpfs xattr,dev=4940003 1285811137 -hosts /net autofs nosuid,indirect,ignore,nobrowse,dev=4c00001 1285811148 auto_home /home autofs indirect,ignore,nobrowse,dev=4c00002 1285811148 cordb:vold(pid530) /vol nfs ignore,noquota,dev=4bc0001 1285811149 I suspect the problem is not related to the mount point, but rather the disk slice I'm trying to mount: bash-3.00# newfs -v /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3: Device busy

  Read the article

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

• Import virtualBox appliance to KVM

  - by Hugo Bulnes

  Im new using KVM as a virtualization solution. Currently I'm using VirtualBox to manage my virtual machines in my personal computer, but I'm moving my virtualization to a Server, so I set up a Linux server with KVM. And now I'm trying to import a virtualBox vm to KVM. So far I couldn't make it work. I already convert the ova file from VirtualBox to a format more familiar to KVM (qcow2), and I try to create a new virtual machine using virt-install command and setting the new virtual machine hard drive with the .qcow2 file. There is anyone could help me? thank you!

  Read the article

• 64 Bit Windows drivers for Inspiron 1720

  - by Rob Allen

  Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

  Read the article

• DVD ROM not working only in windows?

  - by Behrooz A

  I have an Asus N53SV laptop, My DVD rom doesn't read any type of DVD in windows , but I just installed windows 7 from a bootable DVD , I think this problem occurred after I tried to change my partitioning with paragon partition magic , I was trying to shrink , join and so , after that my windows showed an error that windows cannot find [weird address] on hard disk every time on starts. windows itself says the DVD drive works correctly and driver is working properly, but no DVD or CD can be read , note that the DVD I'm trying to read is the same DVD which I used to install windows some minutes ago. I don't know what's the problem

  Read the article

• Use DOS batch to move all files up 1 directory

  - by Harminoff

  I have created a batch file to be executed through the right-click menu in Win7. When I right-click on a folder, I would like the batch file to move all files (excluding folders) up 1 directory. I have this so far: PUSHHD %1 MOVE "%1\*.*" ..\ This seems to work as long as the folder I'm moving files from doesn't have any spaces. When the folder does have spaces, I get an error message: "The syntax of the command is incorrect." So my batch works on a folder titled PULLTEST but not on a folder titled PULL TEST. Again, I don't need it to move folders, just files. And I would like it to work in any directory on any drive. There will be no specific directories that I will be working in. It will be random. Below is the registry file I made if needed for reference. Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Directory\shell\PullFiles] @="PullFilesUP" [HKEY_CLASSES_ROOT\Directory\shell\PullFiles\command] @="\"C:\\Program Files\\MyBatchs\\PullFiles.bat\" \"%1\""

  Read the article

• Windows 7, files reappear after deletion.

  - by HeavyWave

  I'm trying to delete some files from a folder. I've taken ownership of the files and the folder. When I delete these files Windows doesn't report any errors and deletes them. BUT, after I press F5 these files reappear again. There are no messages whatsoever, they are just undeletable. I know login off will help, but how do I fix it without going through the pain of closing everything down? P.S. Files disappear from the folder after aprox. 5 minutes. Update. Turns out my version of Windows did not properly upgrade from test version, so it had some weird disk drive issues.

  Read the article

• how to restore grub

  - by takeshin

  During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

  Read the article

• SCSI vs SATA? Is SCSI "actually" better?

  - by earlz

  Well, I was talking with a guy about servers the other day. I was a bit shocked whenever I asked him if there was any significant difference between SCSI and SATA and why he always uses SCSI. (note, I'm not sure if by SCSI he meant SAS) He told me that SCSI is always faster and that the drives are always more reliable.. I mean, this seems like a bold statement. He told me something about how SCSI will always be faster than SATA because the OS sends the SCSI (controller?) a request to get a file and it will build the file inside of the SCSI controller, instead of searching all over the disk.. which I do not understand how that would work, so I figure it is BS. SAS and SATA currently have equivalent data rate speeds.. Is there any true backing for his reasoning that SCSI is always faster and more reliable than SATA?

  Read the article

• Issue with Toshiba Satellite C50 A-1JM

  - by Nathan Hawkes

  I am having some odd problems with my Toshiba laptop. For the last two days, it has not loaded past the boot screen for hours, if at all. When I force the laptop off and switch it back on, it goes to the Preparing Automatic Repair process but will not complete the process and go to the desktop. However, this only happens when the battery is plugged in. When I remove the battery and run the laptop on power, it works without issue. Would this be a battery issue (given it works without the battery) or a hard drive issue (given it won't get past the boot screen)? If neither, what would you suggest as a solution?

  Read the article

• Rename Devices in Device Manager

  - by Luke

  This is mostly just for the USB ports, as I recognize everything else in computers.... Anyways, is there a way to rename, or otherwise, identify which USB port (or other hardware for that matter) is which device in Device Manager? I know I can plug in a flash drive, then see what port it is connected with, and find out that way. What I would like though, is to find out that a certain plug is always a certain device in Device Manager. If I can then have a system in mind that always has the same order, I can look and see if a USB port is not being detected or not working properly, and as I uninstall/reinstall USB devices, I know I won't lose my keyboard or mouse, for example. The OS in question currently is Windows 7, but I would accept a solution for ANY version of Windows USB Devices | +--+USB Root Hub Port A | | | ---Keyboard | +--+USB Root Hub Port B | | | ---Mouse | +--+USB Root Hub Port C | ---Empty

  Read the article

• VMWare Server lck file keeps coming back

  - by muncherelli

  I am running VMWare Server 2.0 on a Debian Lenny system as a host OS. I am getting this error when I try to start a Virtual Machine Cannot open the disk '/var/lib/vmware/Virtual Machines//.vmdk' or one of the snapshot disks it depends on. Reason: Failed to lock the file. So I looked around on the web and found that I need to delete the .lck folder and file in order to get this error This seems to happen any time I reboot my Debian Server. The Virtual Machines sometimes do not recover and this lck file is causing problems. Should I create a cron script that does a rm *.lck on each of my machines on reboot? Looking for any direction on how to resolve this. It seems when i do a "reboot" command it is maybe not gracefully shutting down the VMware containers so the lock files are still intact?

  Read the article

• Prevent users from creating / copying / moving anything except .exe

  - by webnoob

  We have a program that compiles executables into a folder into c:\bin. Ideally I would like to share this folder so users can access the exe's within but stop them creating any other files in there. The reason for this is to stop users grabbing source code and putting it in a shared drive then taking it. We have a Domain Controller setup and all the users belong to a specific security group. Is there any way to achieve this? EDIT: TO clarify, I need to stop users from creating or moving files INTO the C:\bin folder which are not executables.

  Read the article

• I want to version control my entire slice

  - by Tom

  I'm renting a slice (i.e., a VPS) from Slicehost. I've a spent a day or two filling up /usr with my favorite packages, /etc with configs and init scripts, and so on. Now I want to: save this whole setup somewhere (e.g., to load onto another machine). see what changes I've made to which files revert changes, tag revisions, and all that other good version control stuff Saving a disk image gives me (1), but not (2) and (3). Using Subversion (svn import / svn://someotherhost) might give me all three, but I expect problems if I actually try to check a project out into / and maintain .svn directories in root-owned areas. And to load my setup onto a fresh slice, I'd need to install an svn client on it first. Is there a good way to do what I want to do?

  Read the article

• Delta files not deleted

  - by DanieleF

  Dear al, I found out that my VM is running with a snapshot which is not visible in the snapshot manager. I found out also that the machine is running on a delta file (probably an old snaphot) I see there are procedures to consolidate snapshots but what i want to understand now is : Having a VMDK-flat disk of 50gb =which is actually the vdisk created at the beginning Now i have a DELTA file of 38 gb...and this file it is growing on daily basis. My question is : why the delta file is growing ? is that normal ? Please let me know what is behind.

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• Using rsync with link-dest from HFS to NTFS

  - by Tom

  Hi, I'm having a problem with rsync. I'm on a Mac and I'd like to sync my everyday's changes from my HFS+ partition to my NTFS formated networked drive. Pretty simple, and everything goes well except that it syncs every file each times. Here's my script: #! /bin/sh snapshot_dir=/Volumes/USB_Storage/Backups snapshot_id=`date +%Y%m%d%H%M` /usr/bin/rsync -a \ --verbose \ --delete --delete-excluded \ --human-readable --progress \ --one-file-system \ --partial \ --modify-window=1 \ --exclude-from=.backup_excludes \ --link-dest ../current \ /Users/tommybergeron/Desktop/Brainpad \ $snapshot_dir/in-progress cd $snapshot_dir rm -rf $snapshot_id mv in-progress $snapshot_id rm -f current ln -s $snapshot_id $snapshot_dir/current Could someone help me out please? I've been searching for like two hours and I still am clueless. Thanks so much.

  Read the article

• How could I portably split large backup files over multiple discs?

  - by sourcejedi

  Context: I make backups / archives, primarily of photos. I'm experimenting with Bup, which is designed for backup to hard disk. Basically it creates Git repos which include packfiles of up to 1GB. But I still need last-ditch backups to keep offline and move offsite (and keeping them on read-only media is good too!). What are the options for archiving and splitting large files over several discs like CDs (and reading them back!)? I'd prefer methods which will stay readable in future. are portable e.g. to Windows. have known simple implementations, so I could re-implement them myself if necessary. (Using Bup packs will stretch my robustness budget. So I want to be confident about how other parts of the system would behave). I heard split archives are possible with both ZIP and 7-Zip. Is that right?

  Read the article

• Impossible to stop raid device

  - by Traroth

  I'm trying to stop a RAID disk in order to replace it by a new one, as this one is not working properly. I'm typing mdadm --stop /dev/md1, and I'm getting an error message: mdadm: fail to stop array /dev/md1: Device or resource busy I'm getting this message even if I reboot the server, and I can't see a process that could cause this. The server is working under a Debian with a 2.6.18-4-amd64 kernel. Could you help? Edit: Mote details about what my colleague tried out. After unmounting sda1, the command mdadm --remove /dev/md0 /dev/sda1 worked. But now, we still have an error message after mdadm --remove /dev/md1 /dev/sda5: mdadm: hot remove failed for /dev/sda5: Device or resource busy I still don't understand completly how the different partitions are mounted, so I suppose there is something I don't understand in the currenct situation...

  Read the article

< Previous Page | 494 495 496 497 498 499 500 501 502 503 504 505  | Next Page >