Search Results

Search found 59449 results on 2378 pages for 'disk error'.

Page 499/2378 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >

• Did I lose my RAID again?

  - by BarsMonster

  Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful that it even can reshape arrays, so you can start with a smaller array and then grow it as you need. I've bought 3x1Tb drives and made a RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as spares and run a command to grow array to 7-disks. It started working, but speed was ridiculously slow, ~100kb/sec. After processing first 37Mb at such an amazing speed, one of old HDDs fails. I properly shutdown the PC and disconnected the failed drive. After bootup it appeared that it recreated the intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlock, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lose my data again? Any suggestions on how can I make this work? OS is Ubuntu Server 10.04.2. PS. Needless to say, the data is inaccessible - I cannot mount /dev/md0 to save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it. Update: It appears there is some nice info in kern.log: 21:38:48 ...: [ 166.522055] raid5: reshape will continue 21:38:48 ...: [ 166.522085] raid5: device sdb1 operational as raid disk 1 21:38:48 ...: [ 166.522091] raid5: device sdg1 operational as raid disk 4 21:38:48 ...: [ 166.522097] raid5: device sdf1 operational as raid disk 5 21:38:48 ...: [ 166.522102] raid5: device sde1 operational as raid disk 6 21:38:48 ...: [ 166.522107] raid5: device sdd1 operational as raid disk 0 21:38:48 ...: [ 166.522111] raid5: device sdc1 operational as raid disk 3 21:38:48 ...: [ 166.523942] raid5: allocated 7438kB for md0 21:38:48 ...: [ 166.524041] 1: w=1 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524050] 4: w=2 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524056] 5: w=3 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524062] 6: w=4 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524068] 0: w=5 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524073] 3: w=6 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524079] raid5: raid level 6 set md0 active with 6 out of 7 devices, algorithm 2 21:38:48 ...: [ 166.524519] RAID5 conf printout: 21:38:48 ...: [ 166.524523] --- rd:7 wd:6 21:38:48 ...: [ 166.524528] disk 0, o:1, dev:sdd1 21:38:48 ...: [ 166.524532] disk 1, o:1, dev:sdb1 21:38:48 ...: [ 166.524537] disk 3, o:1, dev:sdc1 21:38:48 ...: [ 166.524541] disk 4, o:1, dev:sdg1 21:38:48 ...: [ 166.524545] disk 5, o:1, dev:sdf1 21:38:48 ...: [ 166.524550] disk 6, o:1, dev:sde1 21:38:48 ...: [ 166.524553] ...ok start reshape thread 21:38:48 ...: [ 166.524727] md0: detected capacity change from 0 to 2999995858944 21:38:48 ...: [ 166.524735] md: reshape of RAID array md0 21:38:48 ...: [ 166.524740] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. 21:38:48 ...: [ 166.524745] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reshape. 21:38:48 ...: [ 166.524756] md: using 128k window, over a total of 976561152 blocks. 21:39:05 ...: [ 166.525013] md0: 21:42:04 ...: [ 362.520063] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520073] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:42:04 ...: [ 362.520083] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520092] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:42:04 ...: [ 362.520100] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:42:04 ...: [ 362.520107] Call Trace: 21:42:04 ...: [ 362.520133] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520148] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520159] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:42:04 ...: [ 362.520169] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:42:04 ...: [ 362.520179] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520188] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520194] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520205] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:42:04 ...: [ 362.520214] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:42:04 ...: [ 362.520222] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:42:04 ...: [ 362.520230] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:42:04 ...: [ 362.520236] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:42:04 ...: [ 362.520244] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:42:04 ...: [ 362.520251] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:42:04 ...: [ 362.520258] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:42:04 ...: [ 362.520265] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:42:04 ...: [ 362.520272] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:42:04 ...: [ 362.520279] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:42:04 ...: [ 362.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520290] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520297] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:42:04 ...: [ 362.520304] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:42:04 ...: [ 362.520310] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:42:04 ...: [ 362.520317] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:42:04 ...: [ 362.520324] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:42:04 ...: [ 362.520331] [<ffffffff811a7938>] check_partition+0x138/0x190 21:42:04 ...: [ 362.520338] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:42:04 ...: [ 362.520344] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:42:04 ...: [ 362.520350] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520356] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520362] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520369] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520377] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520385] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520391] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520398] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520406] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:42:04 ...: [ 362.520414] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520421] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520428] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520437] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520446] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520454] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:42:04 ...: [ 362.520462] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520470] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:42:04 ...: [ 362.520478] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:42:04 ...: [ 362.520485] Call Trace: 21:42:04 ...: [ 362.520495] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520502] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520508] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:42:04 ...: [ 362.520514] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:42:04 ...: [ 362.520520] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:42:04 ...: [ 362.520527] [<ffffffff81145375>] __fput+0xf5/0x210 21:42:04 ...: [ 362.520534] [<ffffffff811454b5>] fput+0x25/0x30 21:42:04 ...: [ 362.520540] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:42:04 ...: [ 362.520546] [<ffffffff81141697>] sys_close+0xb7/0x120 21:42:04 ...: [ 362.520553] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520559] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520563] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520567] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:42:04 ...: [ 362.520575] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520582] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:42:04 ...: [ 362.520590] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:42:04 ...: [ 362.520597] Call Trace: 21:42:04 ...: [ 362.520608] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520616] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520626] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:42:04 ...: [ 362.520634] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520644] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:42:04 ...: [ 362.520651] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:42:04 ...: [ 362.520658] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:42:04 ...: [ 362.520668] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:42:04 ...: [ 362.520675] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:42:04 ...: [ 362.520681] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520688] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:42:04 ...: [ 362.520694] [<ffffffff81084416>] kthread+0x96/0xa0 21:42:04 ...: [ 362.520701] [<ffffffff810131ea>] child_rip+0xa/0x20 21:42:04 ...: [ 362.520707] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:42:04 ...: [ 362.520713] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:42:04 ...: [ 362.520718] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520721] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520725] mdadm D 0000000000000000 0 2288 1 0x00000000 21:42:04 ...: [ 362.520733] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520741] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:42:04 ...: [ 362.520748] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:42:04 ...: [ 362.520755] Call Trace: 21:42:04 ...: [ 362.520763] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520771] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:42:04 ...: [ 362.520777] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520783] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:42:04 ...: [ 362.520790] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520795] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520801] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520808] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520815] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520821] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520828] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520834] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520841] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:42:04 ...: [ 362.520848] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:42:04 ...: [ 362.520855] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:42:04 ...: [ 362.520862] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520868] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520874] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520882] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520065] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520077] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:44:04 ...: [ 482.520087] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520096] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:44:04 ...: [ 482.520104] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:44:04 ...: [ 482.520112] Call Trace: 21:44:04 ...: [ 482.520139] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520154] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520165] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:44:04 ...: [ 482.520175] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:44:04 ...: [ 482.520185] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520194] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520201] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520212] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:44:04 ...: [ 482.520221] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:44:04 ...: [ 482.520229] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:44:04 ...: [ 482.520237] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:44:04 ...: [ 482.520244] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:44:04 ...: [ 482.520252] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:44:04 ...: [ 482.520258] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:44:04 ...: [ 482.520266] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:44:04 ...: [ 482.520273] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:44:04 ...: [ 482.520280] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:44:04 ...: [ 482.520286] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:44:04 ...: [ 482.520293] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520299] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520306] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:44:04 ...: [ 482.520313] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:44:04 ...: [ 482.520319] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:44:04 ...: [ 482.520327] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:44:04 ...: [ 482.520334] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:44:04 ...: [ 482.520341] [<ffffffff811a7938>] check_partition+0x138/0x190 21:44:04 ...: [ 482.520348] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:44:04 ...: [ 482.520355] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:44:04 ...: [ 482.520361] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520367] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520373] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520380] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520388] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520396] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520403] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520410] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520417] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:44:04 ...: [ 482.520426] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520432] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520438] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520447] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520458] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520462] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520467] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:44:04 ...: [ 482.520475] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520483] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:44:04 ...: [ 482.520490] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:44:04 ...: [ 482.520498] Call Trace: 21:44:04 ...: [ 482.520508] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520515] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520521] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:44:04 ...: [ 482.520527] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:44:04 ...: [ 482.520533] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:44:04 ...: [ 482.520541] [<ffffffff81145375>] __fput+0xf5/0x210 21:44:04 ...: [ 482.520547] [<ffffffff811454b5>] fput+0x25/0x30 21:44:04 ...: [ 482.520554] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:44:04 ...: [ 482.520560] [<ffffffff81141697>] sys_close+0xb7/0x120 21:44:04 ...: [ 482.520568] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520574] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520578] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520582] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:44:04 ...: [ 482.520590] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520597] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:44:04 ...: [ 482.520605] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:44:04 ...: [ 482.520612] Call Trace: 21:44:04 ...: [ 482.520623] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520633] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520643] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:44:04 ...: [ 482.520651] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520661] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:44:04 ...: [ 482.520668] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:44:04 ...: [ 482.520675] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:44:04 ...: [ 482.520685] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:44:04 ...: [ 482.520692] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:44:04 ...: [ 482.520699] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520705] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:44:04 ...: [ 482.520711] [<ffffffff81084416>] kthread+0x96/0xa0 21:44:04 ...: [ 482.520718] [<ffffffff810131ea>] child_rip+0xa/0x20 21:44:04 ...: [ 482.520725] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:44:04 ...: [ 482.520730] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:44:04 ...: [ 482.520735] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520739] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520743] mdadm D 0000000000000000 0 2288 1 0x00000000 21:44:04 ...: [ 482.520751] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520759] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:44:04 ...: [ 482.520767] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:44:04 ...: [ 482.520774] Call Trace: 21:44:04 ...: [ 482.520782] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520790] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:44:04 ...: [ 482.520797] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520804] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:44:04 ...: [ 482.520810] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520816] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520822] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520829] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520837] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520843] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520850] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520857] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520864] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:44:04 ...: [ 482.520871] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:44:04 ...: [ 482.520878] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:44:04 ...: [ 482.520885] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520891] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520897] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520905] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520053] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520059] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520065] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:46:04 ...: [ 602.520075] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520084] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:46:04 ...: [ 602.520091] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:46:04 ...: [ 602.520099] Call Trace: 21:46:04 ...: [ 602.520127] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:46:04 ...: [ 602.520142] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:46:04 ...: [ 602.520153] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:46:04 ...: [ 602.520162] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:46:04 ...: [ 602.520171] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:46:04 ...: [ 602.520180] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520187] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520197] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:46:04 ...: [ 602.520206] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:46:04 ...: [ 602.520215] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:46:04 ...: [ 602.520222] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:46:04 ...: [ 602.520229] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:46:04 ...: [ 602.520237] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:46:04 ...: [ 602.520244] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:46:04 ...: [ 602.520252] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:46:04 ...: [ 602.520259] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:46:04 ...: [ 602.520266] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:46:04 ...: [ 602.520273] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:46:04 ...: [ 602.520279] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520292] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:46:04 ...: [ 602.520300] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:46:04 ...: [ 602.520306] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:46:04 ...: [ 602.520314] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:46:04 ...: [ 602.520321] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:46:04 ...: [ 602.520328] [<ffffffff811a7938>] check_partition+0x138/0x190 21:46:04 ...: [ 602.520335] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:46:04 ...: [ 602.520342] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:46:04 ...: [ 602.520348] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:46:04 ...: [ 602.520354] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:46:04 ...: [ 602.520359] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:46:04 ...: [ 602.520367] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:46:04 ...: [ 602.520375] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:46:04 ...: [ 602.520383] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:46:04 ...: [ 602.520390] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:46:04 ...: [ 602.520397] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:46:04 ...: [ 602.520404] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:46:04 ...: [ 602.520413] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:46:04 ...: [ 602.520419] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:46:04 ...: [ 602.520425] [<ffffffff811418b0>] sys_open+0x20/0x30 21:46:04 ...: [ 602.520434] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520443] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520447] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520451] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:46:04 ...: [ 602.520460] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520468] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:46:04 ...: [ 602.520475] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:46:04 ...: [ 602.520483] Call Trace: 21:46:04 ...: [ 602.520492] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:46:04 ...: [ 602.520500] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:46:04 ...: [ 602.520506] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:46:04 ...: [ 602.520512] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:46:04 ...: [ 602.520518] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:46:04 ...: [ 602.520526] [<ffffffff81145375>] __fput+0xf5/0x210 21:46:04 ...: [ 602.520533] [<ffffffff811454b5>] fput+0x25/0x30 21:46:04 ...: [ 602.520539] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:46:04 ...: [ 602.520545] [<ffffffff81141697>] sys_close+0xb7/0x120 21:46:04 ...: [ 602.520552] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b

  Read the article

• How to resolve "Google can't find your site's robots.txt" error?

  - by Manivasagam

  I've recently found that "Google can't find your site's robots.txt" in crawl errors. When I tried Fetching as Google, I got result "SUCCESS", then I tried looking at crawl errors and it still shows "Google can't find your site's robots.txt". What can I do to resolve this issue? Before this issue arose, my site was indexed within a few mintues, but now I find that it took time to be indexed in Google's search. When I access http://mydomain.com/robots.txt, it shows the data below: User-agent: *Disallow: /wp-admin/ Disallow: /wp-includes/ I found Blocked URLs = 0, also no any other errors. Is there any other thing I need to change? Or what could be the solution for this? Any help would be appreciated.

  Read the article

• Best way to grow Linux software RAID 1 to RAID 10

  - by Hans Malherbe

  mdadm does not seem to support growing an array from level 1 to level 10. I have two disks in RAID 1. I want to add two new disks and convert the array to a four disk RAID 10 array. My current strategy: Make good backup. Create a degraded 4 disk RAID 10 array with two missing disks. rsync the RAID 1 array with the RAID 10 array. fail and remove one disk from the RAID 1 array. Add the available disk to the RAID 10 array and wait for resynch to complete. Destroy the RAID 1 array and add the last disk to the RAID 10 array. The problem is the lack of redundancy at step 5. Is there a better way?

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• Failed install 12.04 on Intel Hardware Raid with Large Partition (> 2TB)

  - by Michael Wiles

  I have Intel Hardware Raid on the motherboard. I have 10 2 TB HDD that I've configured as RAID 1+0 to be one big 8 TB HDD. Now I'm trying to install ubuntu 12.04 on it. After installing with default desktop installation disk I get a blank screen with a cursor flashing. If I try the alternate guided partitioning option I get error: out of disk. and the grub prompt. If I boot with the rescue disk or such like I can drop into a shell and view the disk. Everything also installs without an issue. Don't know what to do...

  Read the article

• iscsitarget suddenly broken after upgrade of the 12.04 Hardware Stack

  - by RapidWebs

  After an upgrade to the latest Hardware Stack using Ubuntu 12.04, my iscsi service is not longer operational. The error from the service is such: FATAL: Module iscsi_trgt not found. I have learned that I might need to reinstall the package iscsitarget-dkms. this package builds a driver or something during installation, from source. During this build process, it reports and error, and now has also broke my package manager. Here is the relevant output: Building module: cleaning build area.... make KERNELRELEASE=3.13.0-34-generic -C /lib/modules/3.13.0-34-generic/build M=/var/lib/dkms/iscsitarget/1.4.20.2/build........(bad exit status: 2) Error! Bad return status for module build on kernel: 3.13.0-34-generic (i686) Consult /var/lib/dkms/iscsitarget/1.4.20.2/build/make.log for more information. Errors were encountered while processing: iscsitarget E: Sub-process /usr/bin/dpkg returned an error code (1) and this is the information provided by make.log: or iscsitarget-1.4.20.2 for kernel 3.13.0-34-generic (i686) Fri Aug 15 22:07:15 EDT 2014 make: Entering directory /usr/src/linux-headers-3.13.0-34-generic LD /var/lib/dkms/iscsitarget/1.4.20.2/build/built-in.o LD /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/built-in.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/tio.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/iscsi.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/nthread.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.o /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c: In function ‘worker_thread’: /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c:73:28: error: void value not ignored as it ought to be /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c:74:3: error: implicit declaration of function ‘get_io_context’ [-Werror=implicit-function-declaration] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c:74:21: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[2]: * [/var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.o] Error 1 make[1]: * [/var/lib/dkms/iscsitarget/1.4.20.2/build/kernel] Error 2 make: * [module/var/lib/dkms/iscsitarget/1.4.20.2/build] Error 2 make: Leaving directory `/usr/src/linux-headers-3.13.0-34-generic' I am at a loss on how to resolve this issue. any help would be appreciated!

  Read the article

• Need help fixing DPKG errors after update from 12.04 to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

  Read the article

• Boot from external usb hdd won't work in 12.04

  - by Ben Andersen

  I've been running 10.04 on an external USB HDD without problems for years. I installed 12.04 on an external USB HDD and it worked until I upgraded to all the new packages. But after that it wouldn't boot. I just got into the grub prompt. So then I tried installing on the disk inside the computer and that worked fine. But when I take it out and use it as an external USB HDD I just get: error: hd0 out of disk. grub rescue> How can I fix this? So why do I want this you might wonder? Well I have a laptop at home and a somewhat similar at work. And I just move the disk between them and don't have to move a heavy laptop. So I really hope I can continue doing this with 12.04! The old disk is only 80Gb but the new one is 320Gb (7200rpm Toshiba). I'm using 12.04 on a 64Gb SSD as an external drive and it warns about out of disk but it boots anyway most of the times.

  Read the article

• How to retrieve data from a corruped volume

  - by explorex

  Hi, My Ubuntu 10.10 just crashed(probably due to hardware error and in the end I was getting error like Unknown filesystem ..... grub> .. GRUB console before i could take some action) and i reinstalled the same version form USB stick. I had ubuntu installed in ext4 file system and I am also having the same filesystem in the same hard disk on different drive. When I try to access my previous filesystem, i get error Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda6, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so I had some important files in the previous volume, I don't know how to retrieve them. And what are the chances that I would get the same outcome (hardware error)? Please help me!

  Read the article

• Why don't I have a loop error with these redirects?

  - by byronyasgur

  I know this may seem a bit of a question in reverse, but I actually don't seem to have a problem I just want to make sure before I proceed. I have 2 domains domain1.com and domain2.com and a directory my_directory at domain2.com. I have domain2.com setup as an "add on domain" in the cpanel account of domain1.com so that when I go to domain2.com I am taken to domain1.com/my_directory but the browser shows domain2.com in the addressbar so it looks and acts like and is a separate site. However when people browse to domain1.com/directory I want the address bar to show domain2.com not domain1.com/directory. So I put a redirect in the htaccess file to redirect domain1.com/directory to domain2.com and it works perfectly, but I think it shouldnt and I'm worried I've done something wrong. My question is this: domain2.com was already redirected to domain1.com/directory in the first place (I see the redirect in my cpanel under addon domains) so by adding the second redirect in the htaccess file I should be creating a loop! Could somebody please set my mind at rest and show me why not?

  Read the article

• About uninstallation of Ubuntu to allow dual-boot

  - by Palas Ghosh

  I had windows XP and windows 7 previously. I wanted to keep windows XP and replace windows 7 by Ubuntu in a specific drive of hard disk. During installation of Ubuntu I found option replace windows 7 by Ubuntu and I did it. now I found that windows XP has also gone and Ubuntu is occupying the area of whole hard disk. Now I want to uninstall or format the hard disk because Ubuntu is new to me and I am not comfortable with Ubuntu only right now. I want to keep both windows XP and Ubuntu. so how can I uninstall Ubuntu or format hard disk?? please help....Is the formatting is possible by inserting windows XP CD?? Or is there any other way so that without uninstalling Ubuntu I can also install windows XP?

  Read the article

• Fresh Ubuntu Install - Grub not loading

  - by Ryan Sharp

  System Ubuntu 12.04 64-bit Windows 7 SP1 Samsung 64GB SSD - OS' Samsung 1TB HDD - Games, /Home, Swap WD 300'ishGB HDD - Backup Okay, so I'm very frustrated, so please excuse me if I miss anything out as my head is clouded by anger and impatience, etc. I'll try me best, though. First of all, I'll explain how I got to my predicament. I finally got my new SSD. I firstly installed Windows, which completed without a hitch. Afterwards, I tried to install Ubuntu, which failed several times due to problems irrelevant to this question, but I mention this to explain my frustrations, sorry. Anyway, I finally installed Ubuntu. However, I chose the 'bootloader' to be installed on the same partition as where I was installing the Ubuntu Root partition, as that was what I believed to be the best choice. It was of my thinking that it was supposed to go on the same partition and on the SSD, which is my OS drive, though with my problem, it apparently was wrong. So I tried to fix it by checking guides and following their directions, but seemed to have messed it up even more. Here is what I receive after I use the fdisk -l command: (I also added explanations for which I used each partition for) Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 48959486 125044735 38042625 5 Extended /dev/sda5 48959488 125044735 38042624 83 Linux sda1 --/ Windows Recovery sda2 --/ Windows 7 sda3/5 --/ Ubuntu root [ / ] Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1939851263 457821184 83 Linux /dev/sdb6 1939853312 1953523711 6835200 82 Linux swap / Solaris sdb3 --/ Partition for Steam games, etc. sdb5 --/ Ubuntu Home [ /home ] sdb6 --/ Ubuntu Swap Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT sdc1 --/ Generic backup I also used a Boot Script that other users suggested, so that I can give more details on my partitions and also where Grub is located... ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. Now that is weird... Why would Grub2 be installed on both my SSD and HDD? Even weirder is why is Windows on the MBR of my backup hard drive? Nothing I did should have done that... Anyway, here is the entire Output from that script... PASTEBIN So, to summarize what I need: How can I fix my setup so grub loads on startup? How can I clean my partitions to remove unnecessary grubs? What did I do wrong so that I don't do something so daft again? Thank you so much for reading, and I hope you can help me. I've been trying to have a successful setup since Friday, and I'm almost at the point that I'm really tempted to throw my computer out the window due to my frustration.

  Read the article

• Cannot open an external hard drive in Windows

  - by SeeBees

  In Windows 7, I was installing wubi ubuntu to an external hard drive when suddenly it disconnected from the PC. After I connected it back to PC, and double clicked the drive's icon, Windows didn't show the content of the disk but asked me whether I wanted to format it. The hard drive has only one partition. Its format is NTFS. I also connected the disk to Windows XP. It makes the Windows Explorer super slow and I cannot open the disk as well. I can open the disk on Ubuntu and Mac. Is it possible to restore the disk and make it run in Windows? Thanks

  Read the article

• "System.Data.OracleClient requires Oracle client software version 8.1.7 or greater." Error Message

  - by Jandost Khoso

  Quick resolution: Give full permission to AUTHENTICATED USERS in following folders. a) ORACLE_HOME b) Program Files\ORACLE   Check your PATH. You might have installed different clients in your system and your .NET application is pointing to a home with inappoperiate client. What your .NET application should load is OCI.DLL with File version more than 8.1.7. According to the MSDN document Oracle and ADO.NET:   "The .NET Framework Data Provider for Oracle provides access to an Oracle database using the Oracle Call Interface (OCI) as provided by Oracle Client software. The functionality of the data provider is designed to be similar to that of the .NET Framework data providers for SQL Server, OLE DB, and ODBC. "     The MSDN document System Requirements (Oracle) says: "The .NET Framework Data Provider for Oracle requires Microsoft Data Access Components (MDAC) version 2.6 or later. MDAC 2.8 SP1 is recommended. You must also have Oracle 8i Release 3 (8.1.7) Client or later installed. "   Both the .NET Framework Data Provider for Oracle and Oracle Data Provider for .NET are data providers to access Oracle database. The former ships with .NET Framework and requires Oracle client version 8.1.7 or above. The latter is provided by Oracle company and requires Oracle client version 9.2 or later.     The Oracle Data Provider for .NET (ODP.NET) features optimized ADO.NET data access to the Oracle database. ODP.NET allows developers to take advantage of advanced Oracle database functionality, including Real Application Clusters, XML DB, and advanced security.   See the document Comparing the Microsoft .NET Framework 1.1 Data Provider for Oracle and the Oracle Data Provider for .NET for more information about the difference.

  Read the article

• Lenovo G580 Brightness Error caused by unsupported updates. How to revert?

  - by Arjun Bajaj

  I just installed the 64-Bit version of Ubuntu 12.04 on my newly bought Lenovo G580. The brightness control was working properly using the Live CD and when I first started the installed version. Then I updated Ubuntu and restarted my laptop, and suddenly now, I can't change the brightness. I think its caused by some update. And then I went and checked my update settings, and saw that Unsupported Updates were enabled by default. So now I need to fix this brightness issue somehow. What should I do to locate the wrong update and remove it? I don't even mind removing all the updates right now. Thanks for the help. :)

  Read the article

• Does dist-upgrade require PPA software to be uninstalled first?

  - by seb

  Hi all, I'm still running Ubuntu 10.04 with quite a few PPAs. Amongst the PPAs there is Guiodic (Guido Iodice) Lucid quasi-rolling :) PPA which brings most recent versions of many programs to my desktop. My steps: sudo update-manager -d click on upgrade on the appearing window wait for the magic to happen: prepare to upgrade and setting new software channels during 'calculating the changes' I will get the following error message in the panel An error occurred, please run Package Manager form the right-click menu or apt-get in a terminal to see what is wrong. The error message was: ' Error: Marking the upgrade (E:Error, pkgProblemResolver::Resolver generated breaks, this may be caused by help packages.)'This usually means that your installed packages have unmet dependencies When I check Synaptic/apt-get I can't find any errors or hint toward broken packages Could this error be because of many PPA versions being newer than 10.04 original versions?

  Read the article

• Connecting Galaxy Note: Unable to mount Android Error initializing camera: -53: Could not claim the USB device

  - by Claudiu

  I'm running cm9 ics on my Galaxy Note and i tried anything i could find googleing around but to no result, if i look on the phone in usb settings there is the option for mass storage but it's grey and therefore not selectable I don`t know what the problem is but i saw somwhere that it might be an old version of libmtp so i tried to install libmtp 1.1.3 with ./configure make make install but even after when i try mtp-detect it gives me libmtp 1.1.1 is it normal? anyway when i run mtp-detect here is what it gives me libmtp version: 1.1.1 Listing raw device(s) Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. Found 1 device(s): Samsung: GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note (04e8:6860) @ bus 2, dev 6 Attempting to connect device(s) ignoring usb_claim_interface = -99PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device ignoring usb_claim_interface = -99LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 OK. Thanks in advamce

  Read the article

• Why is the file /var/crash/_usr_lib_empathy_empathy-chat.1000.upload empty?

  - by user43816

  I just experienced an unusual crash: I tried to click on a name entry in the contact list of Empathy. A crash happened. Usually I am asked then if I'd like to report the error to Launchpad, and Launchpad opens. This time the error message was: "Excuse me. Ubuntu 12.04 noticed an internal error. If you notice further problems try to restart your computer. Send an error report to Launchpad to help removing this problem?" This time Launchpad did not open automatically. A new window opened and I could read the relevant error report. Later I found the error report in the file /var/crash/_usr_lib_empathy_empathy-chat.1000.crash. Why went the course of action this time differently from other crashes? Why is the file /var/crash/_usr_lib_empathy_empathy-chat.1000.upload empty?

  Read the article

• Why does running this program on 11.10 give a 'GLIBC_2.15 not found' error?

  - by RafLance

  I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

  Read the article

• "Unable to mount location. Failed to mount Windows share" error when trying to share folders

  - by paulus_almighty

  I have two Ubuntu machines both on 11.10 I want to share folders from one to the other. If, on the server machine, (in Nautilus) I right click on the folders and click Properties Share Share this folder Create share. Then on the client I'm prompted for a username and password. My username and password does not work. If I select "Guest access" check box then I get "Unable to mount location. Failed to mount Windows share" This should be straightforward, right?

  Read the article

• GRUB2 not working after installing xubuntu 14.04

  - by h3bm

  I have a vaio laptop and it used to have installed windows 8 and Xubuntu 13.04 in dual boot, everything was working fine. I decided to update my version of xubuntu 14.04 LTS mainly because the support for 13.04 is finished and LTS version have 3 years of support. What I did was to format the partition where xubuntu 13.04 was installed and install 14.04 in that formated partition. When I restarted my computer willing to start using my new system I got the following message: error: symbol 'grub_term_highlight_color' not found and I was not able to enter any OS. I tried boot-repair from live USB more than two times and it did not fix the problem. I tried to enter to my computer using super GRUB2 disk, however it does not apperar to work with UEFI active (besides super grub2 disk says it can) I only get the message "no operating system found". If I boot super grub2 disk with UEFI disabled, super grub2 disk can not detect any OS,I also tried Rescatux distro, however, as of super grub2 disk, rescatux cannot enter when UEFI is active. I tried boot-repair with the option of "restore EFI backups", after that I was able to boot on windows, but no grub menu appeared. I ran boot-repair again with no improving results Here is the last Bootinfo report I got: http://paste.ubuntu.com/7609801/ Do you have any idea of what is happening? I really appreciate your help, Best regards,

  Read the article

• I cannot remove/install software some dependency issue?

  - by Ryuzaki

  I'm having difficulty trying to install/uninstall applications in Ubuntu 12.04 LTS. I have this warning error that appears on my desktop in the form of a red icon with a line through it and it states: An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: 'Error: BrokenCount 0' — This usually means that your installed packages have unmet dependencies. I tried to repair automatically through ubuntu software center and I kept getting errors or it just didn't seem to work. Afterwards, I opened terminal and used sudo apt-get check command to see what the problem was and the results yielded: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libjack-jackd2-0 : Breaks: libjack-jackd2-0:i386 (!= 1.9.8~dfsg.1-1ubuntu1) but 1.9.8~dfsg.2-1precise1 is installed libjack-jackd2-0:i386 : Breaks: libjack-jackd2-0 (!= 1.9.8~dfsg.2-1precise1) but 1.9.8~dfsg.1-1ubuntu1 is installed E: Unmet dependencies. Try using -f. After I ran sudo apt-get -f install (in an attempt to fix the issue at hand), I encountered the following errors/code: okudaira@haru-kano:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 24 not upgraded. 1 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 181702 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) The real problem I'm having is interpreting what is being stated. I'm fairly new to the ubuntu experience so I'm not very well-versed with the terminology and the entire in's and out's. Can someone tell me what's wrong with my system? I can no longer install/remove any programs at all.

  Read the article

• Rewrite rule to show as directory using .htaccess

  - by chanchal1987

  I want to implement a rewrite rule in my .htaccess file to show a specific url as a directory of my server. See the code below I written, RewriteRule ^(.*)/$ ?page=$1 [NC] This will rewrites urls like www.mysite.com/abc/ to www.mysite.com/index.php?page=abc. But if I request www.mysite.com/abc then it is throwing an 404 error. How can I write a rewrite rule which will match www.mysite.com/abc and www.mysite.com/abc/ both? Edit: My current .htaccess file (After Litso's answer's 3rd revision) is like below: ## ErrorDocument 401 /index.php?error=401 ErrorDocument 400 /index.php?error=400 ErrorDocument 403 /index.php?error=403 ErrorDocument 500 /index.php?error=500 ErrorDocument 404 /index.php?error=404 DirectoryIndex index.htm index.html index.php RewriteEngine on RewriteBase / Options +FollowSymlinks RewriteRule ^(.+)\.html?$ $1.php RewriteCond !-d RewriteRule ^(.*)/$ ?page=$1 [NC,L] RewriteCond %{REQUEST_URI} !index.php RewriteRule ^(.*)$ ?page=$1 [NC,L] ##

  Read the article

• Need to Extend Volume

  - by Roger Galindo

  Ok Here is where I am... I have an HP Proliant with 8 Drives configured as RAID5, and C:\Drive Disk 0 and D:\ drive Disk 1. I need to add more space to Disk 0 (C:) and have 150GB available on Disk 1 (D:). I tested the Disk Mgmt on D:\ and freed up 4GB which now shows to be Unallocated. How do I add the 4GB of Unallocated to the c:\? When I click on C:\ the Menu shows "Extend Volume" as Grayed Out not Black but the D:\ Drive shows Extend Volume as selectable/black.

  Read the article

• 12.04 indicates filesystem check on next boot, but never does one

  - by pcm

  Just installed 12.04 32 bit on my machine, with 3 drives. When I open a terminal window or ssh in remotely, I see: Welcome to Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-29-generic-pae i686)  * Documentation:  https://help.ubuntu.com/ *** /dev/sda1 will be checked for errors at next reboot *** *** /dev/sda2 will be checked for errors at next reboot *** *** /dev/sdg1 will be checked for errors at next reboot *** Last login: Fri Aug 31 08:15:41 2012 from .... However, if I reboot, I never see it doing a disk check on boot up, like I used to see with 10.10. Note, after install, I was not seeing the grub menu on boot. I made a ISO disk with BootRepair and now I get the normal grub menu. Any idea as to why the disk check is not happening on boot (I know I can boot a Live CD and then check the disk - I just want the check on boot working)?

  Read the article

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >