Search Results

Search found 14292 results on 572 pages for 'high integrity systems'.

Page 499/572 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• A Guide to Fusion SCM at Oracle OpenWorld 2012

  - by Pam Petropoulos

  Are you attending next week’s Oracle OpenWorld 2012 conference? Then you won’t want to miss the Fusion SCM activities and customer presenters from leading companies like Boeing and Fideltronik. Below you’ll find a day by day guide of the various Fusion SCM sessions, demos and activities during OpenWorld 2012, September 30 – October 4 in San Francisco, CA. Tuesday, October 2 All of the Fusion SCM sessions during OpenWorld will take place in various rooms at Moscone West, a convenience you are sure to appreciate, as will your feet.   The first session at 10:15 – 11:15 am (Moscone West, Room 2006), entitled “Oracle Fusion Supply Chain Management: Overview, Strategy, Customer Experiences, and Roadmap”, provides an overview of Fusion Supply Chain Management applications and will discuss Fusion SCM strategy, future roadmap, and highlights of customer examples. The next session at 11:45 am – 12:45 pm (Moscone West, Room 2022), entitled “Enabling Trusted Enterprise Product Data with Oracle Fusion Product Hub”, may be the session for you if you’re struggling with achieving consistent, high-quality product data that provides significant business value. This session will discuss how Oracle Fusion Product Hub and Oracle Enterprise Data Quality can help you to achieve this vision. A customer presenter from Fideltronik will share their experiences with Oracle Fusion Product Hub. At the end of the day unwind at the Supply Chain Management customer reception from 6:00 – 8:00 pm at the Roe Lounge, located at 651 Howard Street. Registration is required. Click here for details. Wednesday, October 3 Wednesday is a busy day with three Fusion SCM sessions on the agenda. Start your day at 10:15 am at the “Oracle Fusion Supply Chain Management: Customer Adoption and Experiences” session (Moscone West, Room 2003).  This must see session will showcase customer speakers from The Boeing Company and Fideltronik, each of whom will share their company’s experiences in selecting and implementing Fusion SCM applications. If you’re wondering how Fusion SCM applications can co-exist with your existing Oracle applications, then you’ll want to sit in on the 3:30 pm session entitled “Oracle Fusion Supply Chain Management: Coexistence with Other Oracle Applications” (Moscone West, Room 2003). Stick around until 5:00 pm for the final Fusion SCM session of the day entitled “Responsive Fulfillment with Oracle Fusion Supply Chain Management” (Moscone West, Room 2001).  This session will showcase Oracle Fusion Distributed Order Orchestration and Oracle Fusion Global Order Promising and how they are changing the way companies manage order fulfillment in environments. In addition to discussing the current business challenges, product capabilities, value propositions, industry applicability, and future roadmap this session will also feature a customer presenter from The Boeing Company. Thursday, October 4 If you are a retail customer we highly recommend that you attend the final Fusion SCM session of the week at 12:45 pm, entitled “Multichannel Fulfillment Excellence in the Direct-to-Consumer Market” (Moscone West, Room 2024).  Retailers will learn how they can transform their supply chains to meet the ever-increasing demands of buy anywhere/get anywhere cross-channel requirements with Fusion Distributed Order Orchestration and Oracle Fusion Product Hub. Throughout the week, you’ll also want to visit the Fusion SCM demo pods at the Demogrounds in Moscone West so you can see demos of these Fusion applications. Visit pod W-005 for Fusion Distributed Order Orchestration, W-008 for Fusion Inventory and Cost Management, and W-006 for Fusion Product Hub. Click here for the Demogrounds map. A reminder that you can also pre-register for these sessions to secure your spot. Visit the Schedule Builder to pre-enroll for these sessions. Finally, you'll also want to check out the Fusion SCM FocusOn document which includes additional keynote and general sessions that you may want to attend throughout the week.   We look forward to seeing you in San Francisco next week.

  Read the article

• InfiniBand Enabled Diskless PXE Boot

  - by Neeraj Gupta

  When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x  3 root root 4096 Feb 27 15:48 boot drwxr-xr-x  2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

  Read the article

• SQL SERVER – Updating Data in A Columnstore Index

  - by pinaldave

  So far I have written two articles on Columnstore Indexes, and both of them got very interesting readership. In fact, just recently I got a query on my previous article on Columnstore Index. Read the following two articles to get familiar with the Columnstore Index. They will give you a reference to the question which was asked by a certain reader: SQL SERVER – Fundamentals of Columnstore Index SQL SERVER – How to Ignore Columnstore Index Usage in Query Here is the reader’s question: ” When I tried to update my table after creating the Columnstore index, it gives me an error. What should I do?” When the Columnstore index is created on the table, the table becomes Read-Only table and it does not let any insert/update/delete on the table. The basic understanding is that Columnstore Index will be created on the table that is very huge and holds lots of data. If a table is small enough, there is no need to create a Columnstore index. The regular index should just help it. The reason why Columnstore index was needed is because the table was so big that retrieving the data was taking a really, really long time. Now, updating such a huge table is always a challenge by itself. If the Columnstore Index is created on the table, and the table needs to be updated, you need to know that there are various ways to update it. The easiest way is to disable the Index and enable it. Consider the following code: USE AdventureWorks GO -- Create New Table CREATE TABLE [dbo].[MySalesOrderDetail]( [SalesOrderID] [int] NOT NULL, [SalesOrderDetailID] [int] NOT NULL, [CarrierTrackingNumber] [nvarchar](25) NULL, [OrderQty] [smallint] NOT NULL, [ProductID] [int] NOT NULL, [SpecialOfferID] [int] NOT NULL, [UnitPrice] [money] NOT NULL, [UnitPriceDiscount] [money] NOT NULL, [LineTotal] [numeric](38, 6) NOT NULL, [rowguid] [uniqueidentifier] NOT NULL, [ModifiedDate] [datetime] NOT NULL ) ON [PRIMARY] GO -- Create clustered index CREATE CLUSTERED INDEX [CL_MySalesOrderDetail] ON [dbo].[MySalesOrderDetail] ( [SalesOrderDetailID]) GO -- Create Sample Data Table -- WARNING: This Query may run upto 2-10 minutes based on your systems resources INSERT INTO [dbo].[MySalesOrderDetail] SELECT S1.* FROM Sales.SalesOrderDetail S1 GO 100 -- Create ColumnStore Index CREATE NONCLUSTERED COLUMNSTORE INDEX [IX_MySalesOrderDetail_ColumnStore] ON [MySalesOrderDetail] (UnitPrice, OrderQty, ProductID) GO -- Attempt to Update the table UPDATE [dbo].[MySalesOrderDetail] SET OrderQty = OrderQty +1 WHERE [SalesOrderID] = 43659 GO /* It will throw following error Msg 35330, Level 15, State 1, Line 2 UPDATE statement failed because data cannot be updated in a table with a columnstore index. Consider disabling the columnstore index before issuing the UPDATE statement, then rebuilding the columnstore index after UPDATE is complete. */ A similar error also shows up for Insert/Delete function. Here is the workaround. Disable the Columnstore Index and performance update, enable the Columnstore Index: -- Disable the Columnstore Index ALTER INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] DISABLE GO -- Attempt to Update the table UPDATE [dbo].[MySalesOrderDetail] SET OrderQty = OrderQty +1 WHERE [SalesOrderID] = 43659 GO -- Rebuild the Columnstore Index ALTER INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] REBUILD GO This time it will not throw an error while the update of the table goes successfully. Let us do a cleanup of our tables using this code: -- Cleanup DROP INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] GO TRUNCATE TABLE dbo.MySalesOrderDetail GO DROP TABLE dbo.MySalesOrderDetail GO In the next post we will see how we can use Partition to update the Columnstore Index. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Iron Speed Designer 7.0 - the great gets greater!

  - by GGBlogger

  For Immediate Release Iron Speed, Inc. Kelly Fisher +1 (408) 228-3436 [email protected] http://www.ironspeed.com       Iron Speed Version 7.0 Generates SharePoint Applications New! Support for Microsoft SharePoint speeds application generation and deployment   San Jose, CA – June 8, 2010. Software development tools-maker Iron Speed, Inc. released Iron Speed Designer Version 7.0, the latest version of its popular Web 2.0 application generator. Iron Speed Designer generates rich, interactive database and reporting applications for .NET, Microsoft SharePoint and the Cloud.    In addition to .NET applications, Iron Speed Designer V7.0 generates database-driven SharePoint applications. The ability to quickly create database-driven applications for SharePoint eliminates a lot of work, helping IT departments generate productivity-enhancing applications in just a few hours.  Generated applications include integrated SharePoint application security and use SharePoint master pages.    “It’s virtually impossible to build database-driven application in SharePoint by hand. Iron Speed Designer V7.0 not only makes this possible, the tool makes it easy.” – Razi Mohiuddin, President, Iron Speed, Inc.     Integrated SharePoint application security Generated applications include integrated SharePoint application security. SharePoint sites and their groups are used to retrieve security roles. Iron Speed Designer validates the user against a Microsoft SharePoint server on your network by retrieving the logged in user’s credentials from the SharePoint Context.    “The Iron Speed Designer generated application integrates seamlessly with SharePoint security, removing the hassle of designing, testing and approving your own security layer.” -Michael Landi, Solutions Architect, Light Speed Solutions     SharePoint Solution Packages Iron Speed Designer V7.0 creates SharePoint Solution Packages (WSPs) for easy application deployment. Using the Deployment Wizard, a single application WSP is created and can be deployed to your SharePoint server.   “Iron Speed Designer is the first product on the market that allows easy and painless deployment of database-driven .NET web applications inside the SharePoint environment.” -Bryan Patrick, Developer, Pseudo Consulting     SharePoint master pages and themes In V7.0, generated applications use SharePoint master pages and contain the same content as other SharePoint pages. Generated applications use the current SharePoint color scheme and display standard SharePoint navigation controls on each page.   “Iron Speed Designer preserves the look and feel of the SharePoint environment in deployed database applications without additional hand-coding.” -Kirill Dmitriev, Software Developer, Iron Speed, Inc.     Iron Speed Designer Version 7.0 System Requirements Iron Speed Designer Version 7.0 runs on Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003 and 2008. It generates .NET Web applications for Microsoft SQL Server, Oracle, Microsoft Access and MySQL. These applications may be deployed on any machine running the .NET Framework. Iron Speed Designer supports Microsoft SharePoint 2007 and Windows SharePoint Services (WSS3). Find complete information about Iron Speed Designer Version 7.0 at www.ironspeed.com.     About Iron Speed, Inc. Iron Speed is the leader in enterprise-class application generation. Our software development tools generate database and reporting applications in significantly less time and cost than hand-coding. Our flagship product, Iron Speed Designer, is the fastest way to deliver applications for the Microsoft .NET and software-as-a-service cloud computing environments.   With products built on decades of experience in enterprise application development and large-scale e-commerce systems, Iron Speed products eliminate the need for developers to choose between "full featured" and "on schedule."   Founded in 1999, Iron Speed is well funded with a capital base of over $20M and strategic investors that include Arrow Electronics and Avnet, as well as executives from AMD, Excelan, Onsale, and Oracle. The company is based in San Jose, Calif., and is located online at www.ironspeed.com.

  Read the article

• SQLUG Events - London/Edinburgh/Cardiff/Reading - Masterclass, NoSQL, TSQL Gotcha's, Replication, BI

  - by tonyrogerson

  We have acquired two additional tickets to attend the SQL Server Master Class with Paul Randal and Kimberly Tripp next Thurs (17th June), for a chance to win these coveted tickets email us ([email protected]) before 9pm this Sunday with the subject "MasterClass" - people previously entered need not worry - your still in with a chance. The winners will be announced Monday morning.As ever plenty going on physically, we've got dates for a stack of events in Manchester and Leeds, I'm looking at Birmingham if anybody has ideas? We are growing our online community with the Cuppa Corner section, to participate online remember to use the #sqlfaq twitter tag; for those wanting to get more involved in presenting and fancy trying it out we are always after people to do 1 - 5 minute SQL nuggets or Cuppa Corners (short presentations) at any of these User Group events - just email us [email protected] removing from this email list? Then just reply with remove please on the subject line.Kimberly Tripp and Paul Randal Master Class - Thurs, 17th June - LondonREGISTER NOW AND GET A SECOND REGISTRATION FREE*The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance.The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:>> Debunk many of the ingrained misconceptions around SQL Server's behaviour >> Show you disaster recovery techniques critical to preserving your company's life-blood - the data >> Explain how a common application design pattern can wreak havoc in the database >> Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Where: Radisson Edwardian Heathrow Hotel, LondonWhen: Thursday 17th June 2010*REGISTER TODAY AT www.regonline.co.uk/kimtrippsql on the registration form simply quote discount code: BOGOF for both yourself and your colleague and you will save 50% off each registration – that’s a 249 GBP saving! This offer is limited, book early to avoid disappointment.Wed, 23 JunREADINGEvening Meeting, More info and registerIntroduction to NoSQL (Not Only SQL) - Gavin Payne; T-SQL Gotcha's and how to avoid them - Ashwani Roy; Introduction to Recency Frequency - Tony Rogerson; Reporting Services - Tim LeungThu, 24 JunCARDIFFEvening Meeting, More info and registerAlex Whittles of Purple Frog Systems talks about Data warehouse design case studies, Other BI related session TBC Mon, 28 JunEDINBURGHEvening Meeting, More info and registerReplication (Components, Adminstration, Performance and Troubleshooting) - Neil Hambly Server Upgrades (Notes and Best practice from the field) - Satya Jayanty Wed, 14 JulLONDONEvening Meeting, More info and registerMeeting is being sponsored by DBSophic (http://www.dbsophic.com/download), database optimisation software. Physical Join Operators in SQL Server - Ami LevinWorkload Tuning - Ami LevinSQL Server and Disk IO (File Groups/Files, SSD's, Fusion-IO, In-RAM DB's, Fragmentation) - Tony RogersonComplex Event Processing - Allan MitchellMany thanks,Tony Rogerson, SQL Server MVPUK SQL Server User Grouphttp://sqlserverfaq.com"

  Read the article

• 10 Best Programming Podcast 2010 Edition

  - by mbcrump

  This list is in no particular order. Just the 10 best programming podcast that I have found so far. Stack Overflow Podcast -  Jeff Atwood (of codinghorror.com) and Joel Spolsky (of joelonsoftware.com) discuss the development of their new programming community, StackOverflow.com. [This Podcast hasn’t been updated in a while, but its always great to hear more from Jeff Atwood] Hanselminutes - Hanselminutes is a weekly audio talk show with noted web developer and technologist Scott Hanselman and hosted by Carl Franklin. Scott discusses utilities and tools, gives practical how-to advice, and discusses ASP.NET or Windows issues and workarounds. [This Podcast has recently started talking about random topics like diabetes, plane travel and geek relationship tips.  I am not sure if Scott is trying to move to a more mainstream audience or not] Herding Code - A weekly discussion featuring K. Scott Allen (odetocode.com), Kevin Dente, Scott Koon (lazycoder.com), and Jon Galloway. [Great all all-around podcast that I would recommend to all] Deep Fried Bytes - Deep Fried Bytes is an audio talk show with a Southern flavor hosted by technologists and developers Keith Elder and Chris Woodruff. The show discusses a wide range of topics including application development, operating systems and technology in general. Anything is fair game if it plugs into the wall or takes a battery. [This is one that just keeps getting better] Dot Net Rocks - .NET Rocks! is an Internet Audio Talk Show for Microsoft .NET Developers. [One of the first and usually very high quality content] Connected Show - Connected Show Podcast! A podcast covering new Microsoft technology for the developer community. The show is hosted by Dmitry Lyalin and Peter Laudati. [This and Polymorphic are one of my favorite podcast – Dmitry is a great host and would recommend this to all] Polymorphic Podcast - Object oriented development, architecture and best practices in .NET [Craig is a ASP.NET MVP and a great presenter. His podcast is great and it could only be better if he recorded it more often] ASP.NET Podcast - Wallace B. (Wally) McClure presents interviews and short technical talks on .NET Technologies. [Has great information on ASP.NET of course as well as iPhone Dev] Ruby on Rails Podcast - News and interviews about the Ruby language and the Rails website framework. [Even though I am not a Ruby programmer, I’ve found this podcast very interesting] Software Engineering Radio - Software Engineering Radio is a podcast targeted at the professional software developer. The goal is to be a lasting educational resource, not a newscast. Every ten days, a new episode is published that covers all topics software engineering. Episodes are either tutorials on a specific topic, or an interview with a well-known character from the software engineering world. All SE Radio episodes are original content ? we do not record conferences or talks given in other venues. Each episode comprises two speakers to ensure a lively listening experience. SE Radio is an independent and non-commercial organization. [Another excellent podcast – I would recommend any programmer add this to his/her drive home] If I have missed something, please feel free to email me and it might make the 2011 list. =)

  Read the article

• Url rewrite subfolder to root and forbid accessing subfolder

  - by Alessandro Pezzato

  I have drupal installed in a subfolder drupal, but I want to access pages as it is in root folder: http://www.example.com instead of http://www.example.com/drupal I'm able to have this working, but it's also working with url containing subfolder, so I have http://www.example.com and a clone site in http://www.example.com/drupal What is the rule to forbid access to subfolder? I want all url starting with http://www.example.com/drupal being forbidden. This is .htaccess in / directory: Options -Indexes Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^ http://%1%{REQUEST_URI} [L,R=301] RewriteRule ^(.*+)$ drupal/$1 [L,QSA] </IfModule> And this is drupal .htaccess in /drupal/ directory: Options -Indexes Options +FollowSymLinks ErrorDocument 404 index.php DirectoryIndex index.php index.html index.htm # Override PHP settings that cannot be changed at runtime. See # sites/default/default.settings.php and drupal_initialize_variables() in # includes/bootstrap.inc for settings that can be changed at runtime. # PHP 5, Apache 1 and 2. <IfModule mod_php5.c> php_flag magic_quotes_gpc off php_flag magic_quotes_sybase off php_flag register_globals off php_flag session.auto_start off php_value mbstring.http_input pass php_value mbstring.http_output pass php_flag mbstring.encoding_translation off </IfModule> # Requires mod_expires to be enabled. <IfModule mod_expires.c> # Enable expirations. ExpiresActive On # Cache all files for 2 weeks after access (A). ExpiresDefault A1209600 <FilesMatch \.php$> # Do not allow PHP scripts to be cached unless they explicitly send cache # headers themselves. Otherwise all scripts would have to overwrite the # headers set by mod_expires if they want another caching behavior. This may # fail if an error occurs early in the bootstrap process, and it may cause # problems if a non-Drupal PHP file is installed in a subdirectory. ExpiresActive Off </FilesMatch> </IfModule> # Various rewrite rules. <IfModule mod_rewrite.c> RewriteEngine on # Block access to "hidden" directories whose names begin with a period. This # includes directories used by version control systems such as Subversion or # Git to store control files. Files whose names begin with a period, as well # as the control files used by CVS, are protected by the FilesMatch directive # above. RewriteRule "(^|/)\." - [F] # To redirect all users to access the site WITH the 'www.' prefix, # (http://example.com/... will be redirected to http://www.example.com/...) # uncomment the following: # RewriteCond %{HTTP_HOST} !^www\. [NC] # RewriteRule ^ http://www.%{HTTP_HOST}%{REQUEST_URI} [L,R=301] # # To redirect all users to access the site WITHOUT the 'www.' prefix, # (http://www.example.com/... will be redirected to http://example.com/...) # uncomment the following: RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^ http://%1%{REQUEST_URI} [L,R=301] RewriteBase /drupal # Pass all requests not referring directly to files in the filesystem to # index.php. Clean URLs are handled in drupal_environment_initialize(). RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !=/favicon.ico #RewriteRule ^ index.php [L] RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] # Rules to correctly serve gzip compressed CSS and JS files. # Requires both mod_rewrite and mod_headers to be enabled. <IfModule mod_headers.c> # Serve gzip compressed CSS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.css $1\.css\.gz [QSA] # Serve gzip compressed JS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.js $1\.js\.gz [QSA] # Serve correct content types, and prevent mod_deflate double gzip. RewriteRule \.css\.gz$ - [T=text/css,E=no-gzip:1] RewriteRule \.js\.gz$ - [T=text/javascript,E=no-gzip:1] <FilesMatch "(\.js\.gz|\.css\.gz)$"> # Serve correct encoding type. Header append Content-Encoding gzip # Force proxies to cache gzipped & non-gzipped css/js files separately. Header append Vary Accept-Encoding </FilesMatch> </IfModule> </IfModule>

  Read the article

• Focus on Social Relationship Management at Oracle OpenWorld

  - by Pat Ma

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 0 0 1 422 2408 involver 20 5 2825 14.0 Normal 0 false false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Greetings from Oracle OpenWorld 2012. Today, we’re going to focus on Social Relationship Management at Oracle OpenWorld.?Social networking is touching all businesses today.  Customers are speaking about your brand right now on social media sites. Your employees are speaking to one another on social media sites. In an Oracle survey, 40% of consumers factor in Facebook recommendations when making purchasing decisions. Despite the rise of social networking, 70% of marketers report having little understanding of social media conversations happening around their brand. Oracle has invested in technologies that will help companies leverage social media technologies for their enterprise. Our suite of social products is collectively known as Social Relationship Management. Customers are using Social Relationship Management to get analytics to social media conversations around their brand, manage multiple social media channels while keeping their brand consistent, optimize internal workflows and processes, and create better customer relationships and experiences. In this example, using Social Relationship Management, a high-end national grocery chain is able to see that “Coconut Water” is trending in San Francisco. They are now able to send a $2-off coconut water coupon to shoppers who have checked into their San Francisco locations. This promotion further drives sales of coconut water in San Francisco. In another example, using Social Relationship Management, a technology company creates multiple Facebook pages and runs campaigns on them. These social campaigns are now integrated and tracked as another marketing channel in Oracle Fusion CRM. The technology company can now track and respond to a particular customer as he moves across multiple channels – without having to restart the conversation each time the customer contacts the company. Furthermore, the technology company can see in one interface what marketing channels – including social – is performing best for each promotion. Besides being a Software-as-a-Service solution, social is also a Platform-as-a-Service solution. The benefit here is that customers can extend the functionality of our social applications to suit their particular needs or create their own social application from scratch. During the Social Developer track, developers are learning how to use Java and other industry-standard programming languages to plug in social functionality to enterprise applications. To see how Social Relationship Management can help your business build better relationships and experience with customers, visit us on the web at oracle.com/social. There are a lot more social-oriented sessions left at OpenWorld. To view a schedule of the upcoming social-oriented sessions, go here.

  Read the article

• Oracle Announces Leading ISV Integration With Oracle Sales and Marketing Cloud Service

  - by Richard Lefebvre

  More Than 100 ISVs, including Big Machines, Marketo and Xactly, now Provide Integrated Offerings to Help Maximize Sales and Single Customer Viewpoint Demonstrating its continued commitment to business value via open standards and the cloud, Oracle today announced that more than 100 leading ISVs are integrating in the cloud with Oracle Sales and Marketing Cloud Service, a service available through Oracle Cloud. For the first time Oracle Sales and Marketing Cloud Service users can choose from a wide array of directly integrated third-party solutions, providing a new level of choice, seamless deployment and single view of customers with preferred implementations. Top partners, including ActivePrime, Avaya, BigMachines, Box, Brainshark, Callidus Software, CirrusPath, Clicktools, CRMIT, DBSync, EchoSign from Adobe, Eloqua, Fliptop, FPX, HarQen, HubSpot, iHance, InsideSales.com, InsideView, Interactive Intelligence, Lingotek, LinkPoint360, Marketo, Nuance, PerspecSys, Postcode Anywhere, Revegy, salesElement, StrikeIron, upsourceIT, White Springs, X+1 and Xactly, have announced their availability and integration today. By integrating with Oracle Sales and Marketing Cloud Service, ISV solutions can easily be leveraged by customersBy choosing Oracle Sales and Marketing Cloud Service as a sales platform, customers will continue to have complete choice of their own quoting, lead management and sales methodology solutions and it will all be pre-integrated with Oracle Sales and Marketing Cloud Service. With demonstrable integration fusing standards-based technologies, such as SOAP web services, Oracle Sales and Marketing Cloud Service customers choosing ISV integrations will also benefit from familiar ease-of-use and the Oracle Sales and Marketing Cloud ervice user interface, including buttons, links and custom objects for a rich user experience. ISV integration with Oracle Sales and Marketing Cloud Service also enables on-demand contextual data exchange capabilities, linking Oracle Sales and Marketing Cloud Service business data with third-party application data for a complete CRM view. ISVs building robust, repeatable integrations with Oracle Sales and Marketing Cloud Service can begin the process of achieving Oracle Validated Integration, an Oracle PartnerNetwork program that recognizes Oracle partner solutions with proven integration to Oracle Applications. ISVs can learn more about Oracle Validated Integration    here. For customers, Oracle Validated Integration means that a partner’s integration has been tested and validated as functionally and technically sound, that the partner solution is integrated with Oracle Sales and Marketing Cloud Service in a reliable, standardized way, and that the integration operates and performs as documented. Oracle Cloud provides a broad portfolio of Platform Services, Application Services, and Social Services, all on a subscription basis. Oracle Cloud delivers instant value and productivity for end users, administrators, and developers through functionally rich, integrated, secure, enterprise cloud services. Supporting Quotes “BigMachines is a leader in Configure, Price, and Quote solutions in the Cloud. Our solution delivers accurate quotes directly from an opportunity, integrated with the leading Oracle Sales and Marketing Cloud application from Oracle,” says John Pulling, Senior Vice President of Products at Big Machines. “Together, Big Machines and Oracle efficiently automate changes, enabling a faster, more efficient sales process for our joint customers.”   ”Modern marketing and sales must engage customers and prospects in real time across the web, email, social media, online and offline channels to understand where and how to allocate their budgets for maximum return,” said Srini Venkatesan, Senior VP, Products and Engineering at Marketo. “Alignment and integration with Oracle Sales and Marketing Cloud Service allows Marketo’s solutions to deliver innovative capabilities for sales and marketing to adapt and grow their business on the core Oracle platform for CRM.”   “Sales incentives are the best way to drive better performance. Well managed incentives improve the bottom line, particularly when combined with effective sales systems,” said Christopher Cabrera, president and CEO of Xactly Corporation. “With Oracle Sales and Marketing Cloud Service and Xactly working together, customers gain insight and efficiencies. The combination can create more effective compensation programs, while motivating sales to work to its full potential."   “The tremendous integration of leading ISVs with Oracle Sales and Marketing Cloud Service is a testament to the undeniable business value and demand from customers,” said Anthony Lye, SVP of Oracle CRM. “Oracle Sales and Marketing Cloud Service continues to define the industry, and we are proud to work with these leading ISVs to help users simultaneously maximize sales and revenue and extend their current deployments for a deeper and single customer viewpoint.” Supporting Resources Oracle Sales and Marketing Cloud Service Learn More About Oracle Cloud

  Read the article

• Remove Ubuntu or XP from the Windows 7 Boot Menu

  - by Trevor Bekolay

  If you’ve ever used a dual-boot system and then removed one of the operating systems, it can still show up in Windows 7’s boot menu. We’ll show you how to get rid of old entries and speed up the boot process. To edit the boot menu, we will use a program called bcdedit that’s included with Windows 7. There are some third-party graphical applications that will edit the menu, but we prefer to use built-in applications when we can. First, we need to open a command prompt with Administrator privileges. Open the start menu and type cmd into the search box. Right click on the cmd program that shows up, and select Run as administrator. Alternatively, if you’ve disabled the search box, you can find the command prompt in All Programs > Accessories. In the command prompt, type in bcdedit and press enter. A list of the boot menu entries will appear. Find the entry that you would like to delete – in our case, this is the last one, with the description of “Ubuntu”. What we need is the long sequence of characters marked as the identifier. Rather than type it out, we will copy it to be pasted later. Right-click somewhere in the command prompt window and select Mark. By clicking the left mouse button and dragging over the appropriate text, select the identifier for the entry you want to delete, including the left and right curly braces on either end. Press the Enter button. This will copy the text to the clipboard. In the command prompt, type in: bcdedit /delete and then right-click somewhere in the command prompt window and select Paste. Press Enter to input the now completed command. The boot menu entry will now be deleted. Type in bcdedit again to confirm that the offending entry is now gone from the list. If you reboot your machine now, you will notice that the boot menu does not even come up, because there is only one entry in the list (unless you had more than two entries to begin with). You’ve shaved a few seconds off of the boot process! Not to mention the added effort of pressing the enter button. There’s a lot more that you can do with bcdedit, like change the description of boot menu entries, create new entries, and much more. For a list of what you can do with bcdedit, type the following into the Command Window. bcdedit /help While there are third-party GUI solutions for accomplishing the same thing, using this method will save you time by not having to go through the extra steps of installing an extra program. Similar Articles Productive Geek Tips Reinstall Ubuntu Grub Bootloader After Windows Wipes it OutClean Up Ubuntu Grub Boot Menu After UpgradesHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting UbuntuChange the GRUB Menu Timeout on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3

  Read the article

• Microsoft Cloud Day - the ups and downs

  - by Charles Young

  The term ‘cloud’ can sometimes obscure the obvious.  Today’s Microsoft Cloud Day conference in London provided a good example.  Scott Guthrie was halfway through what was an excellent keynote when he lost network connectivity.  This proved very disruptive to his presentation which centred on a series of demonstrations of the Azure platform in action.  Great efforts were made to find a solution, but no quick fix presented itself.  The venue’s IT facilities were dreadful – no WiFi, poor 3G reception (forget 4G…this is the UK) and, unbelievably, no-one on hand from the venue staff to help with infrastructure issues.  Eventually, after an unscheduled break, a solution was found and Scott managed to complete his demonstrations.  Further connectivity issues occurred during the day. I can say that the cause was prosaic.  A member of the venue staff had interfered with a patch board and inadvertently disconnected Scott Guthrie’s machine from the network by pulling out a cable. I need to state the obvious here.  If your PC is disconnected from the network it can’t communicate with other systems.  This could include a machine under someone’s desk, a mail server located down the hall, a server in the local data centre, an Internet search engine or even, heaven forbid, a role running on Azure. Inadvertently disconnecting a PC from the network does not imply a fundamental problem with the cloud or any specific cloud platform.  Some of the tweeted comments I’ve seen today are analogous to suggesting that, if you accidently unplug your microwave from the mains, this suggests some fundamental flaw with the electricity supply to your house.   This is poor reasoning, to say the least. As far as the conference was concerned, the connectivity issue in the keynote, coupled with some later problems in a couple of presentations, served to exaggerate the perception of poor organisation.   Software problems encountered before the conference prevented the correct set-up of a smartphone app intended to convey agenda information to attendees.  Although some information was available via this app, the organisers decided to print out an agenda at the last moment.  Unfortunately, the agenda sheet did not convey enough information, and attendees were forced to approach conference staff through the day to clarify locations of the various presentations. Despite these problems, the overwhelming feedback from conference attendees was very positive.  There was a real sense of excitement in the morning keynote.  For many, this was their first sight of new Azure features delivered in the ‘spring’ release.  The most common reaction I heard was amazement and appreciation that Azure’s new IaaS features deliver built-in template support for several flavours of Linux from day one.  This coupled with open source SDKs and several presentations on Azure’s support for Java, node.js, PHP, MongoDB and Hadoop served to communicate that the Azure platform is maturing quickly.  The new virtual network capabilities also surprised many attendees, and the much improved portal experience went down very well. So, despite some very irritating and disruptive problems, the event served its purpose well, communicating the breadth and depth of the newly upgraded Azure platform.  I enjoyed the day very much.

  Read the article

• The enterprise vendor con - connecting SSD's using SATA 2 (3Gbits) thus limiting there performance

  - by tonyrogerson

  When comparing SSD against Hard drive performance it really makes me cross when folk think comparing an array of SSD running on 3GBits/sec to hard drives running on 6GBits/second is somehow valid. In a paper from DELL (http://www.dell.com/downloads/global/products/pvaul/en/PowerEdge-PowerVaultH800-CacheCade-final.pdf) on increasing database performance using the DELL PERC H800 with Solid State Drives they compare four SSD drives connected at 3Gbits/sec against ten 10Krpm drives connected at 6Gbits [Tony slaps forehead while shouting DOH!]. It is true in the case of hard drives it probably doesn’t make much difference 3Gbit or 6Gbit because SAS and SATA are both end to end protocols rather than shared bus architecture like SCSI, so the hard drive doesn’t share bandwidth and probably can’t get near the 600MiBytes/second throughput that 6Gbit gives unless you are doing contiguous reads, in my own tests on a single 15Krpm SAS disk using IOMeter (8 worker threads, queue depth of 16 with a stripe size of 64KiB, an 8KiB transfer size on a drive formatted with an allocation size of 8KiB for a 100% sequential read test) I only get 347MiBytes per second sustained throughput at an average latency of 2.87ms per IO equating to 44.5K IOps, ok, if that was 3GBits it would be less – around 280MiBytes per second, oh, but wait a minute [...fingers tap desk] You’ll struggle to find in the commodity space an SSD that doesn’t have the SATA 3 (6GBits) interface, SSD’s are fast not only low latency and high IOps but they also offer a very large sustained transfer rate, consider the OCZ Agility 3 it so happens that in my masters dissertation I did the same test but on a difference box, I got 374MiBytes per second at an average latency of 2.67ms per IO equating to 47.9K IOps – cost of an 240GB Agility 3 is £174.24 (http://www.scan.co.uk/products/240gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-500mb-s-85k-iops), but that same drive set in a box connected with SATA 2 (3Gbits) would only yield around 280MiBytes per second thus losing almost 100MiBytes per second throughput and a ton of IOps too. So why the hell are “enterprise” vendors still only connecting SSD’s at 3GBits? Well, my conspiracy states that they have no interest in you moving to SSD because they’ll lose so much money, the argument that they use SATA 2 doesn’t wash, SATA 3 has been out for some time now and all the commodity stuff you buy uses it now. Consider the cost, not in terms of price per GB but price per IOps, SSD absolutely thrash Hard Drives on that, it was true that the opposite was also true that Hard Drives thrashed SSD’s on price per GB, but is that true now, I’m not so sure – a 300GByte 2.5” 15Krpm SAS drive costs £329.76 ex VAT (http://www.scan.co.uk/products/300gb-seagate-st9300653ss-savvio-15k3-25-hdd-sas-6gb-s-15000rpm-64mb-cache-27ms) which equates to £1.09 per GB compared to a 480GB OCZ Agility 3 costing £422.10 ex VAT (http://www.scan.co.uk/products/480gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-410mb-s-30k-iops) which equates to £0.88 per GB. Ok, I compared an “enterprise” hard drive with a “commodity” SSD, ok, so things get a little more complicated here, most “enterprise” SSD’s are SLC and most commodity are MLC, SLC gives more performance and wear, I’ll talk about that another day. For now though, don’t get sucked in by vendor marketing, SATA 2 (3Gbit) just doesn’t cut it, SSD need 6Gbit to breath and even that SSD’s are pushing. Alas, SSD’s are connected using SATA so all the controllers I’ve seen thus far from HP and DELL only do SATA 2 – deliberate? Well, I’ll let you decide on that one.

  Read the article

• News you can use, PeopleTools gems at OpenWorld 2012

  - by PeopleTools Strategy

  Here are some of the sessions which may not have caught your eyes during your scheduling of events you would like to attend at this year's Open World! CON9183 PeopleSoft Technology Roadmap Jeff Robbins Mon, Oct 1 4:45 PM Moscone West, Room 3002/4 Jeff's session is always very well attended. Come to hear, and see, what's going to be delivered in the new release and get some thoughts on where PeopleTools and the industry is heading. CON9186 Delivering a Ground-Breaking User Interface with PeopleTools Matt Haavisto Steve Elcock Wed, Oct 3 3:30 PM Moscone West, Room 3009 This session will be wonderfully engaging for participants.  As part of our demonstration, audience members will be able to interact live and real-time with our demo using their smart phones and tablets as if you are users of the system. CON9188 A Great User Experience via PeopleSoft Applications Portal Matt Haavisto Jim Marion Pramod Agrawal Mon, Oct 1 12:15 PM Moscone West, Room 3009 This session covers not only the PeopleSoft Portal, but new features like Workcenters and Dashboards, and how they all work together to form the PeopleSoft ecosystem. CON9192 Implementing a PeopleSoft Maintenance Strategy with My Update Manager Mike Thompson Mike Krajicek Tue, Oct 2 1:15 PM Moscone West, Room 3009 The LCM development team will show Oracle's My Update Manager for PeopleSoft and how it drastically simplifies deciding what updates are required for your specific environment. CON9193 Understanding PeopleSoft Maintenance Tools & How They Fit Together Mike Krajicek Wed, Oct 3 10:15 AM Moscone West, Room 3002/4 Learn about the portfolio of maintenance tools including some of the latest enhancements such as Oracle's My Update Manager for PeopleSoft, Application Data Sets, and the PeopleSoft Test Framework, and see what they can do for you. CON9200 PeopleTools Product Team Panel Discussion Jeff Robbins Willie Suh Virad Gupta Ravi Shankar Mike Krajicek Wed, Oct 3 5:00 PM Moscone West, Room 3009 Attend this session to engage in an open discussion with key members of Oracle's PeopleTools senior management team. You will be able to ask questions, hear their thoughts, and gain their insight into the PeopleTools product direction. CON9205 Securing Your PeopleSoft Integration Infrastructure Greg Kelly Keith Collins Tue, Oct 2 10:15 AM Moscone West, Room 3011 This session, with the senior integration developer, will outline Oracle's best practices for securing your integration infrastructure so that you know your web services and REST services are as secure as the rest of your PeopleSoft environment. CON9210 Performance Tuning for the PeopleSoft Administrator Tim Bower David Kurtz Mon, Oct 1 10:45 AM Moscone West, Room 3009 Meet long time technical consultants with deep knowledge of system tuning, Tim Bower of the Center of Excellence and David Kurtz, author of "PeopleSoft for the Oracle DBA". System administrators new to tuning a PeopleSoft environment as well as seasoned experts will come away with new techniques that will help them improve the performance of their PeopleSoft system. CON9055 Advanced Management of Oracle PeopleSoft with Oracle Enterprise Manager Greg Kelly Milten Garia Greg Bouras Thurs Oct 4 12:45 PM Moscone West, Room 3009 This promises to be a really interesting session as Milten Garia from CSU discusses lessons learned during the implementation of Oracle's Enterprise Manager with the PeopleSoft plug-in across a multi campus environment. There are some surprising things about Solaris 10 and the Bourne shell. Some creative work by the Unix administrators so the well tried scripts and system replication processes were largely unaffected. CON8932 New Functional PeopleTools Capabilities for the Line of Business User Jeff Robbins Tues, Oct 2 5:00 PM Moscone West, Room 3007 Using PeopleTools 8.5x capabilities like: related content, embedded help, pivot grids, hover-over, and more, Jeff will discuss how these can deliver business value and innovation which will positively impact your business without the high costs associated with upgrading your PeopleSoft applications. Check out a more detailed list here. We look forward to meeting you all there!

  Read the article

• BlueTooth not working on my HP Probook 4720s

  - by mtrento

  the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• top Tweets SOA Partner Community &ndash; June 2012

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity Simone Geib Contact me directly for ideas how to improve http://bit.ly/advancedsoasuite and additional posts, presentations, white papers, #soasuite SOA CommunitySOA Community Newsletter May 2012 https://soacommunity.wordpress.com /2012/05/28/soa-community-newsletter-may-2012/ #soacommunity Simone Geib #soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite SOA CommunitySOA Management with Enterprise Manager Cloud Control 12c and Business Transaction Management 12c Demo https://soacommunity.wordpress.com /2012/05/21/soa-management-with-enterprise-manager-cloud-control-12c-and-business-transaction-management-12c-demo/ #soacommunity OracleBlogs June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA OTNArchBeatEvery cloud needs an SOA lining: analyst | @JoeMcKendrick http://zd.net/KTgMHk ServiceTechSymposium New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOe OTNArchBeat?Every cloud needs an SOA lining: analyst | @JoeMcKendrick http://zd.net/KTgMHk Debra Lilley looks good - real proof people are using the apps ! RT @fteter:Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps OTNArchBeat How to Set JVM Parameters in Oracle SOA 11G | Francis Ip http://bit.ly/JBDYPj demed"rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA Community Sending out invitations to our advanced Fusion Middleware Summer Camps! Want to learn more register for the community http://www.oracle.com/goto/emea/soa SOA Community Middleware Oracle Excellence Awards 2012 - HAPPY NEW YEAR! https://soacommunity.wordpress.com/ 2012/05/31/middleware-oracle-excellence-awards-2012 happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle Simone Geib #oraclesoa performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources OracleBlogs Middleware Oracle Excellence Awards 2012 - HAPPY NEW YEAR! http://ow.ly/1k9ri0 ServiceTechSymposiumNew session just posted to Symposium calendar: "Service Modeling & BPM Business Value Patterns" by Jürgen Kress, Oracle http://www.servicetechsymposium.com/ agenda2012.php #service_modeling_and_bpm _business_value_patterns SOA Community Happy New Year #soacommunity thanks for the business! Time for a drink ;-) http://pic.twitter.com/zkK08KWB Jan van ZoggelUsing execute-sql() function for Name-Value pair lookups in Oracle Service Bus http://wp.me/p1H430-jZ SOA Community Middleware Oracle Excellence Awards 2012&ndash;HAPPY NEW YEAR! http://wp.me/p10C8u-q4 orclateamsoa A-Team Blog #ateam: BPM 11g Deployment & Instance Migration - I have seen a number of request lately asking how to http://ow.ly/1jZ0h8 OTNArchBeat Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q Oracle UPK & Tutor TOMORROW! (June 23rd) - UPK Professional Webinar at Noon ET: Discover why user adoption is a key factor for the http://bit.ly/LjZjdx Sabine Leitner Finance Event im Design-Hotel beim Barbeque: 21. Juni FRA mit Kunden SV Informatik, Schufa, LBBW http://bit.ly/JtwE3v #Oracle @itevent OracleEnterpriseMgr SOA Management with Enterprise Manager Cloud Control 12c and Business Transaction Management 12c Demo http://ow.ly/b3WP1 #em12c ServiceTechSymposium New session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com /agenda2012.php #elastic_soa_in_the_cloud OTNArchBeat Securing Heterogeneous Systems Using Oracle Web Services Manager by @rluttikhuizen & Jens Peters http://bit.ly/KjShFi Oracleteamsoa A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11G http://ow.ly/1k2cnl SOA Community Oracle Service Registry in an automated (Maven) SOA/BPM build http://redstack.wordpress.com /2012/05/22/using-oracle-service-registry-in-an-automated-maven-soabpm-build/ #soacommunity #redstack #soa #osr #opn SOA CommunityHigh demand for advanced Fusion Middleware Summer Camps! Want to learn more register for the #soacommunity http://www.oracle.com/goto/emea/soa OracleBlogs? How to Set JVM Parameters in Oracle SOA 11G http://ow.ly/1k1UTv SOA Community top Tweets SOA Partner Community &ndash; May 2012 http://wp.me/p10C8u-pP ServiceTechSymposium New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Link http://www.servicetechsymposium.com/ agenda2012.php #soa_governance_at_edp For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity,twitter,Oracle,SOA Community,Jürgen Kress,OPN,SOA,BPM

  Read the article

• What Counts For a DBA: Ego

  - by Louis Davidson

  Leaving aside, for a second, Freud’s psychoanalytical definitions, the term “ego” generally refers to a person’s sense of self, and their self-esteem. In casual usage, however, it usually appears in the adjectival form, “egotistical” (most often followed by “jerk”). You don’t need to be a jerk to be a DBA; humility is important. However, ego is important too. A good DBA needs a certain degree of self-esteem…a belief and pride in what he or she can do better than anyone else can. The ideal DBA needs to be humble enough to admit when they are wrong but egotistical enough to know when they are right, and to stand up for that knowledge and make their voice heard. In most organizations, the DBA team is seriously outnumbered by headstrong developers and clock driven managers, and “great” DBAs will often be outnumbered by…well…the not so great. In order to be heard in this environment, a DBA will not only need to be very skilled, but will also need a healthy dose of ego. As Freud might have put it, the unconscious desire of the DBA (the id) is for iron-fist control over their databases, and code that runs in them. However, the ego moderates this desire, seeking to “satisfy the id in realistic ways that, in the long term, bring benefit rather than grief“. In other words, the ego understands the need to exert a measure of control and self-belief, but also to tolerate and play nicely with developers and other DBAs. The trick, naturally, is learning how to be heard when it is important, but also to make everyone around you welcome that input, even when you have to be bold to make the “I know what I am talking about, and you…well…not so much” decisions. Consider a baseball team, bottom of the ninth inning of the championship game, man on first and down one run. Almost anyone on that team will have the ability to hit a home run, but only one or two will have the iron belief that they can pull it off in this critical, end-game situation. The player you need in this situation is the one who has passionately gone the extra mile preparing for just this moment, is bursting at the seams with self-confidence, and can look the coach in the eye and state, boldly, “Put me in, I am your best bet“. Likewise, on those occasions when high customer demand coincides with copious system errors, and panic is bubbling just beneath the surface, you don’t need the minimally qualified support person, armed with the “reboot and hope” technique (though that sometimes works!). You need the DBA who steps up and says, “Put me in” and has the skill and tenacity to back up those words and to fix the pinpoint and fix the problem, whatever it takes, while keeping customers and managers happy. Of course, the egotistical DBA will happily spend hours telling you how great they are at their job, and how brilliantly they put out a previous fire, and this is no guarantee that they can deliver. However, if an otherwise-humble DBA looks you in the eye and says, “I can do it”, then hear them out. Sometimes, this burst of ego will be exactly what’s required.

  Read the article

• Is SugarCRM really adequate for custom development (or adequate at all)? [closed]

  - by dukeofgaming

  Have you used SugarCRM for custom development successfully?, if so, have you done it programmatically or through the Module Builder? Were you successful? If not, why? I used SugarCRM for a project about two years ago, I ran into errors from the very installation, having to hack the actual installation file to deploy the software in the server and other erros that I can't recall now. Two years after, I'm picking it up for a project once again. I'm feeling like I should have developed the whole thing from scratch myself. Some examples: I couldn't install it in the server (again). I had to install it locally, then copy the files and database over to the server and manually edit the config file. Constantly getting deployment errors from the module builder. One reason is SugarCRM keeps creating a record in the upgrade_history table for a file that does not exist, I keep deleting such record and it keeps coming back corrupt. I get other deployment errors, but have not figured them out. then I have to rollback all files and database to try again. I deleted a custom module with relationships, the relationships stayed in the other modules and cannot be deleted anymore, PHP warnings all over the place. Quick create for custom modules does not appear, hack needed. Its whole cache directory is a joke, permanent data/files are stored there. The module builder interface disappears required fields. Edit the wrong thing, module builder won't deploy again, then pray Quick Repair and/or Rebuild Relationships do the trick. My impression of SugarCRM now is that, regardless of its pretty exterior and apparent functionality, it is a very low quality piece of software. This even scared me more: http://amplicate.com/hate/sugarcrm; a quote: I wis this info had been available when I tried to implement it 2 years ago... I searched high and low and the only info I found was positive. Yes, it's a piece of crap. The community edition was full of bugs... nothing worked. Essentially I got fired for implementing it. I'm glad though, because now I work for myself, am much happier and make more money... so, I should really thank SugarCRM for sucking so much I guess! I figured that perhaps some of you have had similar experiences, and have either sticked with SugarCRM or moved on to another solution. I'm very interested in knowing what your resolutions were -or your current situations are- to make up my own mind, since the project I'm working on is long term and I'm feeling SugarCRM will be more an obstacle than an aid. After further failed attempts to continue using this software I continued to stumble upon dead-ends when using the module editor, I could only recover from this errors by using version control. We are now moving on to a custom implementation using Symfony; perhaps if we were using it with its out-of-the-box modules we would have sticked with it.

  Read the article

• Big Data – Basics of Big Data Analytics – Day 18 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned the importance of the various components in Big Data Story. In this article we will understand what are the various analytics tasks we try to achieve with the Big Data and the list of the important tools in Big Data Story. When you have plenty of the data around you what is the first thing which comes to your mind? “What do all these data means?” Exactly – the same thought comes to my mind as well. I always wanted to know what all the data means and what meaningful information I can receive out of it. Most of the Big Data projects are built to retrieve various intelligence all this data contains within it. Let us take example of Facebook. When I look at my friends list of Facebook, I always want to ask many questions such as - On which date my maximum friends have a birthday? What is the most favorite film of my most of the friends so I can talk about it and engage them? What is the most liked placed to travel my friends? Which is the most disliked cousin for my friends in India and USA so when they travel, I do not take them there. There are many more questions I can think of. This illustrates that how important it is to have analysis of Big Data. Here are few of the kind of analysis listed which you can use with Big Data. Slicing and Dicing: This means breaking down your data into smaller set and understanding them one set at a time. This also helps to present various information in a variety of different user digestible ways. For example if you have data related to movies, you can use different slide and dice data in various formats like actors, movie length etc. Real Time Monitoring: This is very crucial in social media when there are any events happening and you wanted to measure the impact at the time when the event is happening. For example, if you are using twitter when there is a football match, you can watch what fans are talking about football match on twitter when the event is happening. Anomaly Predication and Modeling: If the business is running normal it is alright but if there are signs of trouble, everyone wants to know them early on the hand. Big Data analysis of various patterns can be very much helpful to predict future. Though it may not be always accurate but certain hints and signals can be very helpful. For example, lots of data can help conclude that if there is lots of rain it can increase the sell of umbrella. Text and Unstructured Data Analysis: unstructured data are now getting norm in the new world and they are a big part of the Big Data revolution. It is very important that we Extract, Transform and Load the unstructured data and make meaningful data out of it. For example, analysis of lots of images, one can predict that people like to use certain colors in certain months in their cloths. Big Data Analytics Solutions There are many different Big Data Analystics Solutions out in the market. It is impossible to list all of them so I will list a few of them over here. Tableau – This has to be one of the most popular visualization tools out in the big data market. SAS – A high performance analytics and infrastructure company IBM and Oracle – They have a range of tools for Big Data Analysis Tomorrow In tomorrow’s blog post we will discuss about very important components of the Big Data Ecosystem – Data Scientist. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• WebCenter Customer Spotlight: Texas Industries, Inc.

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryTexas Industries, Inc. (TXI) is a leading supplier of cement, aggregate, and consumer product building materials for residential, commercial, and public works projects. TXI is based in Dallas and employs around 2,000 employees. The customer had the challenge of decentralized and manual processes for entering 180,000 vendor invoices annually.  Invoice entry was a time- and resource-intensive process that entailed significant personnel requirements. TXI implemented a centralized solution leveraging Oracle WebCenter Imaging, a smart routing solution that enables users to capture invoices electronically with Oracle WebCenter Capture and Oracle WebCenter Forms Recognition to send  the invoices through to Oracle Financials for approvals and processing.  TXI significantly lowered resource needs for payable processing,  increase productivity by 80% and reduce invoice processing cycle times by 84%—from 20 to 30 days to just 3 to 5 days, on average. Company OverviewTexas Industries, Inc. (TXI) is a leading supplier of cement, aggregate, and consumer product building materials for residential, commercial, and public works projects. With operating subsidiaries in six states, TXI is the largest producer of cement in Texas and a major producer in California. TXI is a major supplier of stone, sand, gravel, and expanded shale and clay products, and one of the largest producers of bagged cement and concrete  products in the Southwest. Business ChallengesTXI had the challenge of decentralized and manual processes for entering 180,000 vendor invoices annually.  Invoice entry was a time- and resource-intensive process that entailed significant personnel requirements. Their business objectives were: Increase the efficiency of core business processes, such as invoice processing, to support the organization’s desire to maintain its role as the Southwest’s leader in delivering high-quality, low-cost products to the construction industry Meet the audit and regulatory requirements for achieving Sarbanes-Oxley (SOX) compliance Streamline entry of 180,000 invoices annually to accelerate processing, reduce errors, cut invoice storage and routing costs, and increase visibility into payables liabilities Solution DeployedTXI replaced a resource-intensive, paper-based, decentralized process for invoice entry with a centralized solution leveraging Oracle WebCenter Imaging 11g. They worked with the Oracle Partner Keste LLC to develop a smart routing solution that enables users to capture invoices electronically with Oracle WebCenter Capture and then uses Oracle WebCenter Forms Recognition and the Oracle WebCenter Imaging workflow to send the invoices through to Oracle Financials for approvals and processing. Business Results Significantly lowered resource needs for payable processing through centralization and improved efficiency  Enabled the company to process invoices faster and pay bills earlier, allowing it to take advantage of additional vendor discounts Tracked to increase productivity by 80% and reduce invoice processing cycle times by 84%—from 20 to 30 days to just 3 to 5 days, on average Achieved a 25% reduction in paper invoice storage costs now that invoices are captured digitally, and enabled a 50% reduction in shipping costs, as the company no longer has to send paper invoices between headquarters and production facilities for approvals “Entering and manually processing more than 180,000 vendor invoices annually was time and labor intensive. With Oracle Imaging and Process Management, we have automated and centralized invoice entry and processing at our corporate office, improving productivity by 80% and reducing invoice processing cycle times by 84%—a very important efficiency gain.” Terry Marshall, Vice President of Information Services, Texas Industries, Inc. Additional Information TXI Customer Snapshot Oracle WebCenter Content Oracle WebCenter Capture Oracle WebCenter Forms Recognition

  Read the article

• ArchBeat Top 10 for December 2-8, 2012

  - by Bob Rhubart

  The Top 10 most-clicked items shared on the OTN ArchBeat Facebook page for the week of December 2-8, 2012 Configure Oracle SOA JMSAdatper to Work with WLS JMS Topics Another of the four posts published on Dec 4 by the Fusion Middleware A-Team blogger identified as "fip" illlustrates "how to configure the JMS Topic, the JmsAdapter connection factory, as well as the composite so that the JMS Topic messages will be evenly distributed to same composite running off different SOA cluster nodes without causing duplication." Web Service Example - Part 3: Asynchronous Part 3 in this series from the Oracle ADF Mobile blog looks at "firing the web service asynchronously and then filling in the UI when it completes." Denis says, "This can be useful when you have data on the device in a local store and want to show that to the user while the application uses lazy loading from a web service to load more data." Advanced Oracle SOA Suite Oracle Open World 2012 SOA Presentations Oracle SOA & BPM Partner Community blogger Juergen Kress shares a list of 13 SOA presentations delivered or moderated by Oracle SOA Product Management at OOW12 in San Francisco. Oracle WebLogic Server WLS Domain Browser My colleague Jeff Davies, a frequent speaker at OTN Architect Day events and a genuinely nice guy, emailed me last night with this message: "I just came across this app on Google Play. It allows WebLogic administrators to browse WLS 12c domain information. I installed it on my phone and tried it out. Works very fast." I'm an iPhone guy, but I'm perfectly comfortable taking Jeff at his word. The app is called WLS Domain Browser. Follow the link for more info from the Google Play site. Retrieve Performance Data from SOA Infrastructure Database Another of the four blog posts published on Dec 4 by very busy Oracle Fusion Middleware A-Team member "fip," this one offers "examples of some basic SQL queries you can run against the infrastructure database of Oracle SOA Suite 11G to acquire the performance statistics for a given period of time." How to Achieve OC4J RMI Load Balancing "Having returned from a customer who faced challenges with OC4J RMI load balancing, I felt there is still some confusion in the field [about] how OC4J RMI load balancing works," says the Oracle Fusion Middleware A-Team member known only as "fip." "Hence I decide to dust off an old tech note that I wrote a few years back and share it with the general public." From XaaS to Java EE – Which damn cloud is right for me in 2012? Oracle ACE Director Markus Eisele wrestles with a timely technical issue and shares his observations on several of the alternatives. Exalogic 2.0.1 Tea Break Snippets - Creating a ModifyJeOS VirtualBox "One of the main advantages of this is that Templates can be created away from the Exalogic Environment," explains The Old Toxophilist. (BTW: I had to look it up: a toxophilist is one who collects bows and arrows.) ADF Mobile - Implementing Reusable Mobile Architecture "Reusability was always a strong part of ADF," says Oracle ACE Director Andrejus Baranovskis. "The same high reusability level is supported now in ADF Mobile." The objective of this post is "to prove technically that [the] reusable architecture concept works for ADF Mobile." Using BPEL Performance Statistics to Diagnose Performance Bottlenecks Someone had a busy day… This post, one of four published on DeC 4 by a member of the Oracle Fusion Middleware A-Team identified only as "fip," offers details on how to "enable, retrieve and interpret the performance statistics, before the future versions provides a more pleasant user experience." Thought for the Day "If you're afraid to change something it is clearly poorly designed." — Martin Fowler Source: SoftwareQuotes.com

  Read the article

• Oracle's PeopleSoft Customer Advisory Boards Convene to Discuss Roadmap at Pleasanton Campus

  - by john.webb(at)oracle.com

  Last week we hosted all of the PeopleSoft CABs (Customer Advisory Boards) at our Pleasanton Development Center to review our detailed designs for future Feature Packs, PeopleSoft 9.2, and beyond. Over 150 customers from 79 companies attended representing a variety of industries, geographies, and company sizes. The PeopleSoft team relies heavily on this group to provide key input on our roadmap for applications as well as technology direction. A good product strategy is one part well thought out idea with many handfuls of customer validation, and very often our best ideas originate from these customer discussions. While the individual CABs have frequent interactions with our teams, it's always great to have all of them in one place and in person. Our attendance was up from last year which I attribute to two things: (1) More interest as a result of PeopleSoft 9.1 upgrade; (2) An improving economy allowing for more travel. Maybe we should index the second item meeting-to-meeting and use it as a market indicator - we'll see! We kicked off the day one session with an overview of the PeopleSoft Roadmap and I outlined our strategy around Feature Packs and PeopleSoft 9.2. Given the high adoption rate of PeopleSoft 9.1 (over 4x that of 9.0 given the same time lapse since the release date), there was a lot of interest around the 9.1 Feature Packs as a vehicle for continuous value. We provided examples of our 3 central design themes: Simplicity, Productivity, and lower TCO, including those already delivered via Feature Packs in 2010. A great example of this is the Company Directory feature in PeopleSoft HCM. The configuration capabilities and the new actionable links our CAB advised us on last Spring were made available to all customers late last year. We reviewed many more future Navigation changes that will fundamentally change the way users interact with PeopleSoft. Our old friend, the menu tree, is being relegated from center stage to a bit part, with new concepts like Activity Guides, Train Stops, Related Actions, Work Centers, Collaborative Workspaces, and Secure Enterprise Search bringing users what they need in a contextual, role based manner with fewer clicks. Paco Aubrejuan, our PeopleSoft GM, and Steve Miranda, the SVP for Fusion Applications, then discussed our plans around Oracle's Application Investment Strategy.  This included our continued investment in developing both PeopleSoft and Fusion as well as the co-existence strategy with new Fusion Apps integrating to PeopleSoft Apps. Should you want to view this presentation, a recording is available. Jeff Robbins, our lead PeopleTools Strategist, provided the roadmap for PeopleTools and discussed our continuing plan to deliver annual releases to further evolve the user experience. Numerous examples were highlighted with the Navigation techniques I mentioned previously. Jeff also provided a lot of food for thought around Lifecycle Management topics and how to remain current on releases with a  lower cost of ownership. Dennis Mesler, from Boise, was the guest speaker in this slot, who spoke about the new PeopleSoft Test Framework (PTF). Regression Testing is a key cost component when product updates are applied. This new tool (which is free to all PeopleSoft customers as part of PeopleTools 8.51) provides a meta data driven approach to recording and executing test scripts. Coupled with what our Usage Monitor enables, PTF provides our customers a powerful tool to lower costs and manage product updates more efficiently and at the time of their choosing. Beyond the general session, we broke out into the individual CABs: HCM, Financials, ESA/ALM, SRM, SCM, CRM, and PeopleTools/ Technology. A day and half of very engaging discussions around our plans took place for each product pillar. More about that to follow in future posts.      We capped the first day with a reception sponsored by our partners: InfoSys, SmartERP (represented by Doris Wong), and Grey Sparling  Solutions (represented by Chris Heller and Larry Grey). Great to see these old friends actively engaged in the very busy PeopleSoft ecosystem!   Jeff Robbins previews the roadmap for PeopleTools with the PeopleSoft CAB  

  Read the article

• SPARC T4-2 Produces World Record Oracle Essbase Aggregate Storage Benchmark Result

  - by Brian

  Significance of Results Oracle's SPARC T4-2 server configured with a Sun Storage F5100 Flash Array and running Oracle Solaris 10 with Oracle Database 11g has achieved exceptional performance for the Oracle Essbase Aggregate Storage Option benchmark. The benchmark has upwards of 1 billion records, 15 dimensions and millions of members. Oracle Essbase is a multi-dimensional online analytical processing (OLAP) server and is well-suited to work well with SPARC T4 servers. The SPARC T4-2 server (2 cpus) running Oracle Essbase 11.1.2.2.100 outperformed the previous published results on Oracle's SPARC Enterprise M5000 server (4 cpus) with Oracle Essbase 11.1.1.3 on Oracle Solaris 10 by 80%, 32% and 2x performance improvement on Data Loading, Default Aggregation and Usage Based Aggregation, respectively. The SPARC T4-2 server with Sun Storage F5100 Flash Array and Oracle Essbase running on Oracle Solaris 10 achieves sub-second query response times for 20,000 users in a 15 dimension database. The SPARC T4-2 server configured with Oracle Essbase was able to aggregate and store values in the database for a 15 dimension cube in 398 minutes with 16 threads and in 484 minutes with 8 threads. The Sun Storage F5100 Flash Array provides more than a 20% improvement out-of-the-box compared to a mid-size fiber channel disk array for default aggregation and user-based aggregation. The Sun Storage F5100 Flash Array with Oracle Essbase provides the best combination for large Oracle Essbase databases leveraging Oracle Solaris ZFS and taking advantage of high bandwidth for faster load and aggregation. Oracle Fusion Middleware provides a family of complete, integrated, hot pluggable and best-of-breed products known for enabling enterprise customers to create and run agile and intelligent business applications. Oracle Essbase's performance demonstrates why so many customers rely on Oracle Fusion Middleware as their foundation for innovation. Performance Landscape System Data Size(millions of items) Database Load(minutes) Default Aggregation(minutes) Usage Based Aggregation(minutes) SPARC T4-2, 2 x SPARC T4 2.85 GHz 1000 149 398* 55 Sun M5000, 4 x SPARC64 VII 2.53 GHz 1000 269 526 115 Sun M5000, 4 x SPARC64 VII 2.4 GHz 400 120 448 18 * – 398 mins with CALCPARALLEL set to 16; 484 mins with CALCPARALLEL threads set to 8 Configuration Summary Hardware Configuration: 1 x SPARC T4-2 2 x 2.85 GHz SPARC T4 processors 128 GB memory 2 x 300 GB 10000 RPM SAS internal disks Storage Configuration: 1 x Sun Storage F5100 Flash Array 40 x 24 GB flash modules SAS HBA with 2 SAS channels Data Storage Scheme Striped - RAID 0 Oracle Solaris ZFS Software Configuration: Oracle Solaris 10 8/11 Installer V 11.1.2.2.100 Oracle Essbase Client v 11.1.2.2.100 Oracle Essbase v 11.1.2.2.100 Oracle Essbase Administration services 64-bit Oracle Database 11g Release 2 (11.2.0.3) HP's Mercury Interactive QuickTest Professional 9.5.0 Benchmark Description The objective of the Oracle Essbase Aggregate Storage Option benchmark is to showcase the ability of Oracle Essbase to scale in terms of user population and data volume for large enterprise deployments. Typical administrative and end-user operations for OLAP applications were simulated to produce benchmark results. The benchmark test results include: Database Load: Time elapsed to build a database including outline and data load. Default Aggregation: Time elapsed to build aggregation. User Based Aggregation: Time elapsed of the aggregate views proposed as a result of tracked retrieval queries. Summary of the data used for this benchmark: 40 flat files, each of size 1.2 GB, 49.4 GB in total 10 million rows per file, 1 billion rows total 28 columns of data per row Database outline has 15 dimensions (five of them are attribute dimensions) Customer dimension has 13.3 million members 3 rule files Key Points and Best Practices The Sun Storage F5100 Flash Array has been used to accelerate the application performance. Setting data load threads (DLTHREADSPREPARE) to 64 and Load Buffer to 6 improved dataloading by about 9%. Factors influencing aggregation materialization performance are "Aggregate Storage Cache" and "Number of Threads" (CALCPARALLEL) for parallel view materialization. The optimal values for this workload on the SPARC T4-2 server were: Aggregate Storage Cache: 32 GB CALCPARALLEL: 16   See Also Oracle Essbase Aggregate Storage Option Benchmark on Oracle's SPARC T4-2 Server oracle.com Oracle Essbase oracle.com OTN SPARC T4-2 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 28 August 2012.

  Read the article

• Announcing Oracle Knowledge 8.5: Even Superheroes Need Upgrades

  - by Richard Lefebvre

  It’s no secret that we like Iron Man here at Oracle. We've certainly got stuff in common: one of the world’s largest technology companies and one of the world’s strongest technology-driven superheroes. If you've seen the recent Iron Man movies, you might have even noticed some of our servers sitting in Tony Stark’s lab. Heck, our CEO made a cameo appearance in one of the movies. Yeah, we’re fans. Especially as Iron Man is a regular guy with some amazing technology – like us. But Like all great things even Superheroes need upgrades, whether it’s their suit, their car or their spacestation. Oracle certainly has its share of advanced technology.  For example, Oracle acquired InQuira in 2011 after years of watching the company advance the science of Knowledge Management.  And it was some extremely super technology.  At that time, Forrester’s Kate Leggett wrote about it in ‘Standalone Knowledge Management Is Dead With Oracle's Announcement To Acquire InQuira’ saying ‘Knowledge, accessible via web self-service or agent UIs, is a critical customer service component for industries fielding repetitive questions about policies, procedures, products, and solutions.’  One short sentence that amounts to a very tall order.  Since the acquisition our KM scientists have been hard at work in their labs. Today Oracle announced its first major knowledge management release since its acquisition of InQuira: Oracle Knowledge 8.5. We’ve put a massively-upgraded supersuit on our KM solution because we still have bad guys to fight. And we are very proud to say that we went way beyond our original plans. So what, exactly, did we do in Oracle Knowledge 8.5? We did what any high-tech super-scientist would do. We made Oracle Knowledge smarter, stronger and faster. First, we gave Oracle Knowledge a stronger heart: Certified on Oracle technologies, including Oracle WebLogic Server, Oracle Business Intelligence, Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud. Huge scaling and performance improvements. Then we gave it a better reach: Improved iConnect functionality that delivers contextualized knowledge directly into CRM applications. Better content acquisition support across disparate sources. Enhanced Language Support including Natural Language search support for 16 Languages. Enhanced Keyword Search for 23 authoring languages, as well as enhanced out-of-the-box industry ontologies covering 14 languages. And finally we made Oracle Knowledge ridiculously smarter: Improved Natural Language Search and a new Contextual Answer Delivery that understands the true intent of each inquiry to deliver the best possible answers. AnswerFlow for Guided Navigation & Answer Delivery, a new application for guided troubleshooting and answer delivery. Knowledge Analytics standardized on Oracle’s Business Intelligence Enterprise Edition. Knowledge Analytics Dashboards optimized search and content creation through targeted, actionable insights. A new three-level language model "Global - Language - Locale" that provides an improved search experience for organizations with a global footprint. We believe that Oracle Knowledge 8.5 is the most sophisticated KM solution in existence today and we’ve worked very hard to help it fulfill the promise of KM: empowering customers and employees with deep insights wherever they need them. We hope you agree it’s a suit worth wearing. We are continuing to invest in Knowledge Management as it continues to be especially relevant today with the enterprise push for peer collaboration, crowd-sourced wisdom, agile innovation, social interaction channels, applied real-time analytics, and personalization. In fact, we believe that Knowledge Management is a critical part of the Customer Experience portfolio for success. From empowering employee’s, to empowering customers, to gaining the insights from interactions across all channels, businesses today cannot efficiently scale their efforts, strengthen their customer relationships or achieve their growth goals without a solid Knowledge Management foundation to build from. And like every good superhero saga, we’re not even close to being finished. Next we are taking Oracle Knowledge into the Cloud. Yes, we’re thinking what you’re thinking: ROCKET BOOTS! Stay tuned for the next adventure… By Nav Chakravarti, Vice-President, Product Management, CRM Knowledge and previously the CTO of InQuira, a knowledge management company acquired by Oracle in 2011

  Read the article

• 256 Worker Role 3D Rendering Demo is now a Lab on my Azure Course

  - by Alan Smith

  Ever since I came up with the crazy idea of creating an Azure application that would spin up 256 worker roles (please vote if you like it ) to render a 3D animation created using the Kinect depth camera I have been trying to think of something useful to do with it. I have also been busy working on developing training materials for a Windows Azure course that I will be delivering through a training partner in Stockholm, and for customers wanting to learn Windows Azure. I hit on the idea of combining the render demo and a course lab and creating a lab where the students would create and deploy their own mini render farms, which would participate in a single render job, consisting of 2,000 frames. The architecture of the solution is shown below. As students would be creating and deploying their own applications, I thought it would be fun to introduce some competitiveness into the lab. In the 256 worker role demo I capture the rendering statistics for each role, so it was fairly simple to include the students name in these statistics. This allowed the process monitor application to capture the number of frames each student had rendered and display a high-score table. When I demoed the application I deployed one instance that started rendering a frame every few minutes, and the challenge for the students was to deploy and scale their applications, and then overtake my single role instance by the end of the lab time. I had the process monitor running on the projector during the lab so the class could see the progress of their deployments, and how they were performing against my implementation and their classmates. When I tested the lab for the first time in Oslo last week it was a great success, the students were keen to be the first to build and deploy their solution and then watch the frames appear. As the students mostly had MSDN suspicions they were able to scale to the full 20 worker role instances and before long we had over 100 worker roles working on the animation. There were, however, a few issues who the couple of issues caused by the competitive nature of the lab. The first student to scale the application to 20 instances would render the most frames and win; there was no way for others to catch up. Also, as they were competing against each other, there was no incentive to help others on the course get their application up and running. I have now re-written the lab to divide the student into teams that will compete to render the most frames. This means that if one developer on the team can deploy and scale quickly, the other team still has a chance to catch up. It also means that if a student finishes quickly and puts their team in the lead they will have an incentive to help the other developers on their team get up and running. As I was using “Sharks with Lasers” for a lot of my demos, and reserved the sharkswithfreakinlasers namespaces for some of the Azure services (well somebody had to do it), the students came up with some creative alternatives, like “Camels with Cannons” and “Honey Badgers with Homing Missiles”. That gave me the idea for the teams having to choose a creative name involving animals and weapons. The team rendering architecture diagram is shown below.   Render Challenge Rules In order to ensure fair play a number of rules are imposed on the lab. ·         The class will be divided into teams, each team choses a name. ·         The team name must consist of a ferocious animal combined with a hazardous weapon. ·         Teams can allocate as many worker roles as they can muster to the render job. ·         Frame processing statistics and rendered frames will be vigilantly monitored; any cheating, tampering, and other foul play will result in penalties. The screenshot below shows an example of the team render farm in action, Badgers with Bombs have taken a lead over Camels with Cannons, and both are  leaving the Sharks with Lasers standing. If you are interested in attending a scheduled delivery of my Windows Azure or Windows Azure Service bus courses, or would like on-site training, more details are here.

  Read the article

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >