Search Results

Search found 17569 results on 703 pages for 'computer intelligence'.

Page 500/703 | < Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >

  • Use two networks at the same time?

    - by Christopher
    I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

    Read the article

  • Installed 4GB memory but Windows XP 32 bit only reporting 2GB?

    - by AnthonyWJones
    I've just taken an existing XP Pro 32 bit system that had only 0.5GB of memory installed and maxed it out to 4GB. The BIOS reports the 4GB ram however when XP is booted and I look at the computer properties only 2GB of RAM is reported. Can anyone explain this? Before we go up any blind allys the /3GB switch is not the answer here, I have no need for a single process to use more the 2GB of memory. I'm wondering if the the 32 bit XP Pro is deliberately limited to 2GB. I seem to remember seeing an excellent table on a Microsoft site listing all the various SKUs of Windows and what each one was limited to. However I can't seem to find that table now.

    Read the article

  • How to know why my cd is not booting?

    - by Tom Brito
    I have downloaded Ubuntu 10.10 and burned the ISO but it will not boot. I discarded problems with the ISO, as I've downloaded from the official website with no errors, and burned it with no errors. I discarded problems with the burning, as looks like it was recorded with no errors here and later in another computer. I discarded problems with my DVD reader as other cds boots fine. I'm currently using Ubuntu 9.10, I know I can upgrade via internet, but I have this same problem with my Windows XP cd, so I really would like to discover what's going on here.. My Ubuntu 9.10 cd boots just right, but the new one not. What else can be? Or what more precise tests can I make to discover where's the problem? --More info What happens when I try to boot with the Ubuntu 10.10 cd is that it behavior like there's no bootable cd in the drive. It just don't find the boot on the cd, and start the HD system. My notebook is an Amazon PC Intel Celeron 1.5 with 2Gb memory, a DVD-RW driver, HD samsung with 260GB.

    Read the article

  • ubuntu 12.10/linux mint 14 ssh-copy-id doesn't work and returns Ambiguous output redirect

    - by Marc
    I recently got a new computer and I'm trying to use ssh-copy-id to put my keys on another server so I can login without password. but when I try ssh-copy-id -i ~/.ssh/id_rsa.pub user@server and after inputting the correct password it returns Ambiguous output redirect. There are no other messages after that. I thought it was maybe just Ubuntu 12.10 so I installed Linux Mint 14 and sure enough exact same thing happens. I've tried removing authorized_keys from the remote server but that didn't change anything.

    Read the article

  • Sporadic disk clicking sound

    - by Abdó
    Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

    Read the article

  • Signed and unsigned, and how bit extension works

    - by hatorade
    unsigned short s; s = 0xffff; int i = s; How does the extension work here? 2 larger order bytes are added, but I'm confused whether 1's or 0's are extended there. This is probably platform dependent so let's focus on what Unix does. Would the two bigger order bytes of the int be filled with 1's or 0's, and why? Basically, does the computer know that s is unsigned, and correctly assign 0's to the higher order bits of the int? So i is now 0x0000ffff? Or since ints are default signed in unix does it take the signed bit from s (a 1) and copy that to the higher order bytes?

    Read the article

  • PC doesn't power up anymore

    - by Andrew
    I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

    Read the article

  • Unable to install Android for Windows 7 because JDK is not found

    - by user1294663
    I have JDK SE7u4 installed in windows 7. I tried to install Android on Windows 7 using the installer_r18-windows.exe but no avail. The setup window showed the message saying that the Java SE JDK not found and ERROR: Failed to find Java version for C:\Windows\System32\java.exe The system cannot found the file specified. If you believe you have a JDK installed and it was not properly recognized, simply set an environment variable JAVA_HOME to point to it I right clicked on Computer Properties Advanced System Settings Environment variables. I created a NEW system variable called JAVA_HOME and set the value as C:\Program Files\Java\jdk1.7.0_04\bin or C:\Windows\System32\java.exe. I ran the installer again — the same error message still appeared.

    Read the article

  • Laptop VGA Out Stopped Working

    - by Jack7890
    I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

    Read the article

  • What do you do to make sure you take proper/enough breaks, while avoiding unwanted side-effects of break taking?

    - by blueberryfields
    preamble It seems to me that computer programmers are one of a select few groups of people who actually take pleasure from sitting in front of computers for long periods of time. Most people in other professions actively dislike their time at computers, and do their best to avoid it (so, I assume, they don't have problems taking breaks). At least for me, having external cues for taking breaks, and clear instructions on what to do with each break (stretch, go for a walk, close my eyes, look into a distance of preferably a few km and focus on faraway objects, etc...), is a must. So far, I've just been making up the breaks and tools to get them as I go along, based on what looks to be low-specificity information found on the net (generic stuff ala ergonomics advice for office staff). This has led to all sorts of side effects - loss of attention as I get distracted if I walk around, breaks in flow with alarm clocks interrupting my thoughts, and people around me assuming I'm low on work due to the frequency of my walking around compared to everyone else. /preamble tl;dr Taking breaks is important My internal break taking system doesn't work, and ad-hoc ones have unwanted side effects What do you do to make sure you take proper breaks? How do you avoid unwanted side-effects, such as getting distracted or interrupting flow or giving your co-workers the impression you're spending a lot of time goofing off?

    Read the article

  • Is there such thing as a "theory of system integration"?

    - by Jeff
    There is a plethora of different programs, servers, and in general technologies in use in organizations today. We, programmers, have lots of different tools at our disposal to help solve various different data, and communication challenges in an organization. Does anyone know if anyone has done an serious thinking about how systems are integrated? Let me give an example: Hypothetically, let's say I own a company that makes specialized suits a'la Iron Man. In the area of production, I have CAD tools, machining tools, payroll, project management, and asset management tools to name a few. I also have nice design space, where designers show off their designs on big displays, some touch, some traditional. Oh, and I also have one of these new fangled LEED Platinum buildings and it has number of different computer controlled systems, like smart window shutters that close when people are in the room, a HVAC system that adjusts depending on the number of people in the building, etc. What I want to know is if anyone has done any scientific work on trying to figure out how to hook all these pieces together, so that say my access control system is hooked to my payroll system, and my phone system allowing my never to swipe a time card, and to have my phone follow me throughout the building. This problem is also more than a technology challenge. Every technology implementation enables certain human behaviours, so the human must also be considered as a part of the system. Has anyone done any work in how effectively weave these components together? FYI: I am not trying to build a system. I want to know if anyone has thoroughly studied the process of doing a large integration project, how they develop their requirements, how they studied the human behaviors, etc.

    Read the article

  • "DNS not responding" error with D-Link router and PPTP internet connection

    - by Born2win
    I have a D-Link DIR-615 router since around six months. My internet connection is VPN (PPTP) based, i.e. I have been given a username and password from my ISP and my IP address is dynamic. Since a few days I am experiencing a serious problem. My router connects normally (I can see the yellow light), but my computer is giving me a "DNS not responding" error. I have tried everything (reset, reboot etc.) but no success.

    Read the article

  • which vista services can be disabled with impunity?

    - by GwenKillerby
    I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. thanks, Gwen.

    Read the article

  • How do I modify these VPN connection settings for Xfce?

    - by Dave M G
    I have signed up for a VPN (Virtual Private Network) service, and I configured it for use on my computer that runs Gnome Classic with the following instructions: In Terminal, install openvpn packages with sudo apt-get install network-manager-openvpn. 1. Restart the network manager with sudo restart network-manager 2. Run sudo wget https://www.xxxxxxx.com/ovpnconfigure.zip 3. Extract the files from the zip with unzip ovpnconfigure.zip. 4. Move cert.crt to /etc/openvpn 5. Open the Network Manager on the menu bar. 6. Choose add and select the OpenVPN connection type, and click Create. 7. Enter Private Internet Access SSL for the Connection Name. 8. Enter xxxxxx.xxxxxxxx.com for the Gateway 9. Select Password and enter your login credentials. 10. Browse and select the CA Certificate we saved in Step 3. 11. Choose Advanced and enable LZO Compression. 12. Apply and exit. 13. Connect using the Network Manager. It worked, but now I want to set up access to the same VPN service on another machine that runs Mythbuntu, which uses Xfce as its desktop manager. So every point from 5 on doesn't apply. How can I modify the above instructions so that I can get my VPN service working with Xfce. As a further note, while I can access the Xfce desktop directly if I need to, it's more convenient for me to access it via the command line and SSH from on of my other computers. A command line process would be ideal. (I looked for this, and found instructions only for PPTP access, whereas I need OpenVPN.)

    Read the article

  • Mysql Error 2002 (HY000) on Snow Leopard

    - by Ole Media
    My boss update my computer to Snow Leopard, after the update we had a set back and deleted a few files/folders, since then is just nightmare after another one. I finally getting things back but I'm still having problems with MySQL. This is what I did: Deleted ALL of mysql files/folders Download and installed the packages mysql-5.1.45-osx10.6-x86_64.dmg installed the Startup item and the preferences panel After the above, I tried to start MySQL from the preferences panel without luck, and running the following command from Terminal /usr/local/mysql/bin/mysql I get the following result ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) I looked at some other post for possible solutions, but what they does not exactly fits my problem, so I cannot find a solution. I'm new to all this and your help will be much appreciated.

    Read the article

  • How to to specify network address for a dhcp client

    - by drecute
    I have setup and configured a DHCP server on a sparc running Solaris 10. Now I want to test the DHCP server by creating a DHCP client on another computer running Solaris 11. I would like to know, how do I specify a network address for a dhcp client such that its generated ip address is within a specific subnet. For example: The DHCP server host = 172.1.1.1 So I want the client machine to have an IP Address in the range of 172.1.1.1 255.255.255.0. Please help me.

    Read the article

  • Internal Website links only working for some users

    - by Ryan
    We are having a very hard time trying to figure out this problem or the root cause. Our website www. countrymusicislove .com is only correctly displaying the homepage for some users. Anytime they click on a post, about me, etc, a 404 error page is displayed. Everything worked fine before we moved over to a new hosting company 2 weeks ago. I am looking for any ideas and even willing to pay someone to troubleshoot and fix this issue as no one seems to have an answer. The entire website is done in the latest version of wordpress. The old website address for the website is http://siteground243.com/~countr10/ And the domain name was registered through google for enom.com Everything is now going through Arvixe.com On my work computer, I am able to get the 404 error to appear on other pages by turning on friendly error messages. When I turn off friendly error messages, everything seems to work. I have tried this several times and it doesn't seem like a coincidence.

    Read the article

  • Thunderbird: Synchronize tags

    - by fuenfundachtzig
    When I check my mail (via IMAP) on my laptop I'd like to see the same tags that I set when I checked my mail on my office computer. So the question is: Is it possible to synchronize user-specified mail tags between Thunderbird running on different computers? I've read that tags could be stored via IMAP on the server, so maybe it's just that the server of my mail provider does not support this IMAP feature? (Whichever it is...) Has anybody any experience with this? Related, but not my primary concern: Will there ever be a more flexible tagging system in Thunderbird which allows for an easier definition of new tags? (I.e. that a don't have to define new tags in the preferences menu, but can just type them in when reading a mail?)

    Read the article

  • Backup and restore.

    - by Xavierjazz
    I have a Thinkpad T60 with a 150GIg internal hard drive. XP Pro SP3. I also have a similar hard drive that used to be in another laptop connected via USB. It contains only data. I have cleared out a lot of duplicate files and now would like to back both up. I have Retrospect and a brand new 1Tbyte drive for this purpose. Can I back up the whole computer (both drives) but, in case only one fails, can I just restore that drive or do I have to restore both drives at the same time? I don't understand how partitions work so might I be able to partition the 1T drive and restore each smaller drive independently? Thanks.

    Read the article

  • Getting touchpad to work in desktop ubuntu

    - by kamziro
    I bought a small touchpad to stick on top of the keyboard, and it works fine on the windows computer, but not on my ubuntu desktop. I mean, when I do "xinput list" it shows the following: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PIXART USB OPTICAL MOUSE id=8 [slave pointer (2)] ? ? Logitech USB-PS/2 Optical Mouse id=11 [slave pointer (2)] ? ? Microsoft Wired Keyboard 600 id=13 [slave pointer (2)] ? ? Macintosh mouse button emulation id=14 [slave pointer (2)] ? ? Cirque Corporation 9925 AG Touchpad id=15 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? No brand SP04-A1 id=9 [slave keyboard (3)] ? Elite Silicon USB Audio Device id=10 [slave keyboard (3)] ? Microsoft Wired Keyboard 600 id=12 [slave keyboard (3)] The Cirque Corporation touchpad (I'm assuming that's the component name) is the touchpad. Is there anything I'm missing?

    Read the article

  • What differences are there between an official Ubuntu AMI image and a base install from an ISO?

    - by David Winter
    When creating a new instance on AWS using an official Ubuntu 12.04 server AMI, what differences are there compared to if I was to do a standard server install on a computer of my own? For example, the default user is 'ubuntu'. An SSH public key is added to that users authorized_keys file. Sudo is passwordless for that user. PasswordAuthentication is disabled for SSH. etc etc. Configurations have been changed from their defaults, and I'd like to know if there is a list, or somewhere I could find out the modifications made.

    Read the article

  • IPv6 connections routed to IPv4 device

    - by Yvan JANSSENS
    I have an IBM 9406-250 with V5R1 and IPv4 only connectivity, and want it to be reachable over IPv6. I cannnot install an IPv6 stack on it, but I want it to be accessible by IPv6 so I can drop the requirement to VPN to my home network. I have an OpenWRT device running, which takes care of the IPv6 routing on my network and the tunnel to SIXXS, and I was wondering if it is possible to assign another IPv6 address to that device, and route it to the IPv4 IBM computer. Which software do I need for this, and how is this technique called?

    Read the article

  • How to Disable secondary drive from booting upon restart - Windows

    - by DevCompany
    I had a Windows 2003 Hard Drive on my server and it went bad so I installed a new clean hard drive and installed Windows 2008 R2 on the new clean drive. I moved the old 2003 drive to be used only for general storage on the same computer. It usually boots into Windows 2008 upon a restart, but just sometimes it starts trying to boot the old 2003 drive and causes boot issues(NTDLR Bootloader, and other errors), even though the order of boot preference is set to boot 2008, and NOT 2003. I need to know how to remove any old code that keeps this old drive as a bootable drive. I still want to use it as a secondary drive just dont want to have any boot code on it. hopefully my situation is clear for everyone to get a good response. Thank you...

    Read the article

  • Why does my CPU Usage reach 100% too often?

    - by deathlock
    I'm using a dual-core processor and often see my CPU usage reaches 100%. I realize this may happen if I'm running too much applications, so when I know the computer starts to run slowly, I start to close my applications. I usually run 4-5 applications simultaneously. Usually those are: web browser (Google Chrome), Adobe Photoshop, Notepad++, XAMPP, and Windows Task Manager. Usually I close tabs in my Chrome first, because I often browse the net with about 20 tabs/4 windows open, so I presume that would take much memory (bad habit, I know). But even after closing Chrome's tabs or closing other applications, my CPU Usage often stays at high percentage - 72% at best, 100% at worst. I check the Processes tab on Windows Task Manager and usually found the System, System Idle Process, or services.exe taking the highest CPU process (could reach 60). Why is this happening? And is there any solution? EDIT I have T2250 @ 1,73 Ghz and 2.5 GB RAM

    Read the article

  • How can I find out which driver/file is being loaded when the system hangs during the Windows 7 boot

    - by user24247
    My desktop computer (1 OS, 1 drive, 1 partition) hangs during the Windows 7 boot process. When selecting F8 I can select Safe Boot which allows me to see the files processed during the boot process. I know that the last line displayed is the last file that was SUCCESFULLY loaded. How do I find out what the next line, and the potential candidate driver/file/program would have been? The unusual thing, at least in my experience, is that the freezing up of the system also happens when I boot from the Windows 7 install disks, which is preventing me from any repair options. With a failure of both, I cannot not restore Windows 7 to a previous date or uninstall drivers/programs that may be the cause of the hanging. Thanks for your responses. Marc

    Read the article

< Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >