Search Results

Search found 51555 results on 2063 pages for 'application shutdown'.

Page 501/2063 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

  • nginx 502 Bad Gateway on every external site

    - by Leandros
    I just installed nginx and followed the guides on the official site, to set it up with php5-fpm, but it just won't work. Not even the default site, without php is working outside of my server. Tried listen = 127.0.0.1:7777 and listen = /var/run/php5-fpm.sock Both don't work. I can access http://localhost with lynx on my server, but not from somewhere else (with external ip obviously). Yes, the php5-fpm deamons are running, yes the port (80 and 7777) is opened. Don't work with php-cgi as well. My config: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; proxy_buffers 16 16k; proxy_buffer_size 32k; fastcgi_buffers 16 16k; fastcgi_buffer_size 32k; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; } Server config: (symlinked to sites-enabled) server { server_name skilloverflow.de *.skilloverflow.de; root /var/www/blog.skilloverflow.de/htdocs; index index.php; error_log /var/log/nginx/skilloverflow.error.log; access_log /var/log/nginx/skilloverflow.access.log; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location / { # This is cool because no php is touched for static content. # include the "?$args" part so non-default permalinks doesn't break when using query string try_files $uri $uri/ /index.php?$args; } location ~ [^/]\.php(/|$) { fastcgi_split_path_info ^(.+?\.php)(/.*)$; if (!-f $document_root$fastcgi_script_name) { return 404; } fastcgi_pass 127.0.0.1:7777; fastcgi_index index.php; include fastcgi_params; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } } PHP Version: 5.4.17-1 nginx version: 1.2.1 Debian 6.0.7 Linux 2.6.32 Edit: Lighttpd is still installed, does that matter? It's not running though. Edit 2: No error or access log is generated. They're all empty.

    Read the article

  • How do you fix "failed command: IDENTIFY DEVICE" showing up in dmesg?

    - by Neil
    I just got a new Mushkin 60gb SSD, and it's now my primary drive in the ata1 spot. I've been getting these failed command: IDENTIFY DEVICE errors which are preventing rebooting and shutdown. Does anyone know what these could be caused by, or how to start troubleshooting? I've tried these kernels: 2.6.32-22-generic 2.6.31-17-generic And they both have the same error. Here is a link to my entire dmesg. And the relevant ata1.00 parts below: [ 59.804237] ata1: drained 256 bytes to clear DRQ. [ 59.804244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 59.804249] ata1.00: failed command: IDENTIFY DEVICE [ 59.804254] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in [ 59.804256] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 59.804258] ata1.00: status: { DRDY } [ 59.804264] ata1: hard resetting link [ 59.804266] ata1: nv: skipping hardreset on occupied port [ 60.272036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.352193] ata1.00: configured for UDMA/133 [ 60.352204] ata1: EH complete

    Read the article

  • Measuring Code Quality

    - by DotNetBlues
    Several months back, I was tasked with measuring the quality of code in my organization. Foolishly, I said, "No problem." I figured that Visual Studio has a built-in code metrics tool (Analyze -> Calculate Code Metrics) and that would be a fine place to start with. I was right, but also very wrong. The Visual Studio calculates five primary metrics: Maintainability Index, Cyclomatic Complexity, Depth of Inheritance, Class Coupling, and Lines of Code. The first two are figured at the method level, the second at (primarily) the class level, and the last is a simple count. The first question any reasonable person should ask is "Which one do I look at first?" The first question any manager is going to ask is, "What one number tells me about the whole application?" My answer to both, in a way, was "Maintainability Index." Why? Because each of the other numbers represent one element of quality while MI is a composite number that includes Cyclomatic Complexity. I'd be lying if I said no consideration was given to the fact that it was abstract enough that it's harder for some surly developer (I've been known to resemble that remark) to start arguing why a high coupling or inheritance is no big deal or how complex requirements are to blame for complex code. I should also note that I don't think there is one magic bullet metric that will tell you objectively how good a code base is. There are a ton of different metrics out there, and each one was created for a specific purpose in mind and has a pet theory behind it. When you've got a group of developers who aren't accustomed to measuring code quality, picking a 0-100 scale, non-controversial metric that can be easily generated by tools you already own really isn't a bad place to start. That sort of answers the question a developer would ask, but what about the management question; how do you dashboard this stuff when Visual Studio doesn't roll up the numbers to the solution level? Since VS does roll up the MI to the project level, I thought I could just figure out what sort of weighting Microsoft used to roll method scores up to the class level and then to the namespace and project levels. I was a bit surprised by the answer: there is no weighting. That means that a class with one 1300 line method (which will score a 0 MI) and one empty constructor (which will score a 100 MI) will have an overall MI of a respectable 50. Throw in a couple of DTOs that are nothing more than getters and setters (which tend to score 95 or better) and the project ends up looking really, really healthy. The next poor bastard who has to work on the application is probably not going to be singing the praises of its maintainability, though. For the record, that 1300 line method isn't a hypothetical, either. So, what does one do with that? Well, I decided to weight the average by the Lines of Code per method. For our above example, the formula for the class's MI becomes ((1300 * 0) + (1 * 100))/1301 = .077, rounded to 0. Sounds about right. Continue the pattern for namespace, project, solution, and even multi-solution application MI scores. This can be done relatively easily by using the "export to Excel" button and running a quick formula against the data. On the short list of follow-up questions would be, "How do I improve my application's score?" That's an answer for another time, though.

    Read the article

  • Java Spotlight Episode 76: Pro Java FX2 - A Definative Guide to Rich Clients with Java Technology

    - by Roger Brinkley
    Tweet An interview with the authors of Pro Java FX2: A Definative Guide to Rich Clients with Java Technology. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Angela Caicedo has created 3 new Java FX screen cast videos on java UTube channel: Part 1: Building your First Java FX Application with Netbeans 7.1, Part 2: Building your First Java FX Application with Netbeans 7.1, and Getting Started with Scene Builder.  Events March 26-29, EclipseCon, Reston, USA March 27, Virtual Developer Days - Java (Asia Pacific (English)),9:30 am to 2:00pm IST / 12:00pm to 4.30pm SGT  / 3.00pm - 7.30pm AEDT April 4-5, JavaOne Japan, Tokyo, Japan April 12, GreenJUG, Greenville, SC April 17-18, JavaOne Russia, Moscow Russia April 18–20, Devoxx France, Paris, France April 26, Mix-IT, Lyon, France, May 3-4, JavaOne India, Hyderabad, India Feature InterviewPro JavaFX 2: A Definitive Guide to Rich Clients with Java Technology is available from Amazon.com in either paperback or on the Kindle.James L. (Jim) Weaver is a Java and JavaFX developer, author, and speaker with a passion for helping rich-client Java and JavaFX become preferred technologies for new application development. Books that Jim has authored include Inside Java, Beginning J2EE, and Pro JavaFX Platform, with the latter being updated to cover JavaFX 2.0. His professional background includes 15 years as a systems architect at EDS, and the same number of years as an independent developer. Jim is an international speaker at software technology conferences, including the JavaOne conferences in San Francisco and São Paulo. Jim blogs at http://javafxpert.com, tweets @javafxpert. Weiqi Gao is a principal software engineer with Object Computing, Inc., in St. Louis, MO. He has more than 18 years of software development experience and has been using Java technology since 1998. He is interested in programming languages, object-oriented systems, distributed computing, and graphical user interfaces. He is a presenter and a member of the steering committee of the St. Louis Java Users Group. Weiqi holds a PhD in mathematics. Stephen Chin is chief agile methodologist at GXS and a technical expert in client UI technologies. He is lead author on the Pro Android Flash title and coauthored the Pro JavaFX Platform title, which is the leading technical reference for JavaFX. In addition, Stephen runs the very successful Silicon Valley JavaFX User Group, which has hundreds of members and tens of thousands of online viewers. Finally, he is a Java Champion, chair of the OSCON Java conference, and an internationally recognized speaker featured at Devoxx, Codemash, AnDevCon, Jazoon, and JavaOne, where he received a Rock Star Award. Stephen can be followed on twitter @steveonjava and reached via his blog: http://steveonjava.com.Dean Iverson has been writing software professionally for more than 15 years. He is employed by the Virginia Tech Transportation Institute, where he is a rich client application developer. He also has a small software consultancy called Pleasing Software Solutions, which he cofounded with his wife. Johan Vos started to work with Java in 1995. As part of the Blackdown team, he helped port Java to Linux. With LodgON, the company he cofounded, he has been mainly working on Java-based solutions for social networking software. Because he can't make a choice between embedded development and enterprise development, his main focus is on end-to-end Java, combining the strengths of backend systems and embedded devices. His favorite technologies are currently Java EE/Glassfish at the backend and JavaFX at the frontend. Johan's blog can be followed at http://blogs.lodgon.com/johan, he tweets at http://twitter.com/johanvos. Mail Bag What’s Cool Gerrit Grunwald's SteelSeries FX Experience Tools Canned Animations ComboBox

    Read the article

  • How can I restore a corrupted Shotwell db?

    - by Yann Dìnendal
    While I was importing photos from a SD card in Shotwell, my laptop has crashed (shutdown because of over-heating). Now, I can no longer launch Shotwell: $ shotwell ** ERROR:x86_64-linux-gnu/db/VersionTable.c:104:version_table_construct: assertion failed: (res == SQLITE_OK) If I move the .db file ~/.shotwell/data/photo.db elsewhere so it is no longer present (but backed-up), shotwell will launch, but will rebuild its library, which will be empty. I can re-import the folders shotwell creates, but I lose nearly all meta-data (most importantly the "folders", or events, and their main picture) Is there a way to repair/rebuild/restore photo.db? How can I see what's inside? how bad it's damaged? Or is there another way to get back my events and imports?

    Read the article

  • Ubuntu boots to totally blank after I installed some graphic card updates

    - by baboonWorksFine
    I am using Ubuntu 10.04 LTS, dual boot with win7 on ThinkPad T400, I followed Ubuntu update hints and installed some update for my ATI Radeon graphic card, but when I boot to Ubuntu(means I can still load GRUB), the tragedy happened, the screen goes to blank and no matter what key stroke, I can not get any responds, I try to go to text terminal, but impossible! However when I hit the power button, the computer would pop out the Ubuntu shutdown screen briefly and shut down. I figure out I should delete the updates package of my graphic card, but I don't even get a chance to go to text terminal, please help me!

    Read the article

  • Partner Webcast - Migration to Weblogic Server 11g

    - by lukasz.romaszewski(at)oracle.com
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:RO;} Partner Webcast - Migration to Weblogic Server 11g March 25th, 12noonCET (1pm  EET/ 11am GMT)   Description The Oracle WebLogic 11g application server product line is the industry's most comprehensive Java platform for developing, deploying, and integrating enterprise applications. It provides the foundation for application grid, which is an architecture that enables enterprises to outperform their competitors while minimizing operational costs. Agenda 1.      1. Introduction to the Oracle WebLogic Server 11g 2.      2. Migration Process overview 3.      3. Migrating from iAS 10g a.      SmartUpgrade utility introduction b.      SmartUpgrade Demo 4.      4. Migrating from other JEE application servers a.      Understanding potential caveats b.      Using WebLogic classloader mechanism to isolate application c.       Shared libraries overview 5.      5. Migrating Oracle Fusion Middleware components (Forms&Reports, ADF, SOA etc) 6.      6. Summary 7.      7. Q&A    Delivery Format This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. To register, click here For any questions please contact [email protected]. Registrations received less than 24hours  prior to start time may not receive confirmation to attend.

    Read the article

  • How can I get data off of a (probably) very corrupt drive?

    - by Mercury1964
    So, my younger brother wanted my help today. Apparently, he was helping a friend install Ubuntu to his laptop, and midway through the install (on a filled hard-drive with Windows 8, from the liveusb thing): 1) They realized that they had chosen "Erase and install" accidentally and decided the best course of action was to (in the middle of an install, remember) 2) Force shutdown the computer. After I had replaced my eyeballs back into their sockets, my bro asked if I could do anything about his friend's data, which he wanted back. This, however, drifts out of my normal comfort zone. I know this about the install: 1) It was on a fairly new Windows 8 laptop, so it had whatever filesystem it uses nowadays on the entire drive 2) They didn't choose the "zero out drive data" option 3) They stopped the install at some point (not sure if before or after wipe) I can imagine that it now has two corrupted filesystems on it (whatever Windows 8 was on and ext3) and that some of the data still exists (assuming it wasn't overwritten already). Is there anything that can be done for whatever data is left on the drive?

    Read the article

  • Cannot boot from USB disk with "not a COM32R image" error

    - by Siva Prasad Varma
    After installing 11.10 on my Dell Studo 15 (Model 1557) laptop, it started to overheat. Recently it even shutdown twice saying that critical temperature has reached even when I was just idling (not even a single program was open except for Firefox). After learning that it is a problem with 3.0.0 kernel I decided to roll back to 10.04 LTS. I have downloaded the most recent 10.04 iso from ubuntu.com and created a live USB using startup disk creator in 11.10. But when I am trying to boot from USB I am getting the following error vesamenu.c32: not a COM32R image I have installed ubuntu from usb stick a couple of dozen times before this and I think it is not a problem with my hardware. Please tell me what to do.

    Read the article

  • Convert .3GP and .3G2 Files to AVI / MPEG for Free

    - by DigitalGeekery
    3GP and .3G2 are common video capture formats used on many mobile phones, but they may not be supported by your favorite media player. Today we’ll show you a quick and easy way to convert those files to AVI or MPG format with the free Windows application, Pazera Free 3GP to AVI Converter. Download the Pazera Free 3GP to AVI Converter. You’ll have to unzip the download folder, but there is no need to install the application. Just double-click the 3gptoavi.exe file to run the application. To add your 3GP or 3G2 files to the queue to be converted, click on the Add files  button at the top left. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time.   Most users will find it preferable to use one of the pre-configured profiles for their conversion settings. To load a profile, choose one from the Profile drop down list and then click the Load button. You will see the profile update the settings in the panels at the bottom of the application. We tested Pazera Free 3GP to AVI Converter with 3GP files recorded on a Motorola Droid, and found the AVI H.264 Very High Q. profile to return the best results for AVI output, and the MPG – DVD NTSC: MPEG-2 the best results for MPG output. Other profiles produced smaller file sizes, but at a cost of reduced quality video output.   More advanced users may tweak video and audio settings to their liking in the lower panels. Click on the AVI button under Output file format / Video settings to adjust settings AVI… Or the MPG button to adjust the settings for MPG output. By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. When you’ve chosen your settings, click Convert to begin the conversion process.   A conversion output box will open and display the progress. When finished, click Close. Now you’re ready to enjoy your video in your favorite media player. Pazera Free 3GP to AVI Converter isn’t the most robust media conversion tool, but it does what it is intended to do. It handles the task of 3GP to AVI / MPG conversion very well. It’s easy enough for the beginner to manage without much trouble, but also has enough options to please more experienced users. Download Pazera Free 3GP to AVI Converter Similar Articles Productive Geek Tips How To Convert Video Files to MP3 with VLCEasily Change Audio File Formats with XRECODEConvert PDF Files to Word Documents and Other FormatsConvert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1Compress Large Video Files with DivX / Xvid and AutoGK TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad

    Read the article

  • Kubuntu login problem

    - by Balázs Mária Németh
    I have a problem when trying to login to my Kubuntu 10.10. The login screen shows up, then I type my password, a blank screen is shown with my desktop background picture and then throws me back on the login screen. if I choose to login from console, I can do that, and by typing startx I can log in just fine but in the end I cannot shutdown the computer from the k menu nor will my settings remembered for the next time I log back. I have my home directory mounted from a different partition but I tried to create a new user account and I could log in without any kind of problem. The home directory is not encrypted, at least not to my knowledge. Some log files: Xorg.0.log dmesg.out kdm.log xsession.errors

    Read the article

  • Mouse and Keyboard Freeze

    - by kev
    I installed Ubuntu 10.10 today and have had mouse problem since. Symptoms: At some arbitrary point in time (frequency: 2-3 times per hour), the mouse and keyboard stops working for ever(may be). I start System monitor, I found out network was shutdown just before mouse freeze. Some time my keyboard keep typing one key. For example:77777777777777777777777777777777777777777777777777777.....(it keep typing for 20 sec) I found out a script just solve the freeze problem:(I hit Powerbutton) -----------------/etc/acpi/powerbtn.sh------------------------ event=button[ /]power action=/usr/sbin/fix_mouse.sh -----------------/usr/sbin/fix_mouse.sh------------------------ rmmod psmouse modprobe psmouse Yesterday I install Ubuntu 10.04 FAILED also have mouse problem. When I switch back to Windows XP. The network card is down. It kept connecting and disconnecting 1 time per sec. CPU: i5 Motherboard: ASUS P7P55D OS: Windows XP + Ubuntu 10.10 Video Card: ATI 5770 Mouse,Keyboard: PS/2

    Read the article

  • How do I mount this HDD?

    - by Casval Deikun
    I have a Windows HDD attached to an external docking bay on my Ubuntu System, but the HDD brings up an error message: Mounting exited with exit code 14:windows is hibernated, refused to mount. Failed to mount '/dev/sde2':Operation not permitted. The NTFS partition is hibernated. Please resume and shutdown windows properly or mount the volume read-only with the 'ro' mount option, or mount the volume read-write with the 'remove_hiberfile' mount option. For example type in command line: mount -t ntfs-3g-o remove_hiberfile/dev/sde2/media/FE46D60C46D5C615 I am at a loss for exactly how to remove the hiberfile, or even mount it as read-only or read-write. I tried directly copy and pasting that exact command into my terminal, but it said: mount:only root can do that I do not know what to do at this point. I do need to get the information off of this drive, but I do not have a computer to put it in. Does anyone know what I should do from here?

    Read the article

  • Remove/add indicator icons

    - by user209835
    I'm trying out Ubuntu 13.10. I would like to remove some of the default indicator icons in the upper right corner. Is there an easy way to do it? And then I would like to add some other icons (guake, pidgin, shutter, dropbox, kupfer etc.). I have already got the dropbox icon but it's in grey. I would like the default blue icon with the green marker. But if I change theme in ubuntu-tweak or gnome-tweak then the nice shutdown-icon disappears. In linux mint this just works :-).

    Read the article

  • How to move complete SharePoint Server 2007 from one box to another

    - by DipeshBhanani
    It was time of my first onsite client assignment on SharePoint. Client had one server production environment. They wanted to upgrade the topology with completely new SharePoint Farm of three servers. So, the task was to move whole MOSS 2007 stuff to the new server environment without impacting data. The last three scary words “… without impacting data…” were actually putting pressure on my head. Moreover SSP was required to move because additional information has been added for users apart from AD import.   I thought I had to do only backup and restore. It appeared pretty easy at first thought. Just because of these damn scary words, I thought to check out on internet for guidance related to this scenario. I couldn’t get anything except general guidance of moving server on Microsoft TechNet site. I promised myself for starting blogs with this post if I would be successful in this task. Well, I took long time to write this but finally made it. I hope it will be useful to all guys looking for SharePoint server movement.   Before beginning restoration, make sure that, there is no difference in versions of SharePoint at source and destination server. Also check whether the state of SharePoint Installation at the time of backup and restore is same or not. (E.g. SharePoint related service packs and patches if any)   The main tasks of the server movement are as follow:   Backup all the databases Install and configure SharePoint on new environment Deploy all solution (WSP Files) globally to destination server- for installing features attached to the solutions Install all the custom features Deploy/Copy custom pages/files which are added to the “12Hive” folder later Restore SSP Restore My Site Restore other web application   Tasks 3 to 5 are for making sure that we have configured the environment well enough for the web application to be restored successfully. The main and complex task was restoring SSP. I have started restoring SSP through Central Admin. After a while, the restoration status was updated to “unsuccessful”. “Damn it, what went wrong?” I thought looking at the error detail down the page. I couldn’t remember the error message but I had corrected and restored it again.   Actually once you fail restoring SSP, until and unless you don’t clean all related stuff well, your restoration will be failed again and again. I wanted to find the actual reason. So cleaned, restored, cleaned, restored… I had tried almost 5-6 times and finally, I succeeded. I had realized how pleasant it is, to see the word “Successful” on the screen. Without wasting your much time to read, let me write all the detailed steps of restoring SSP:   Delete the SSP through following STSADM command. stsadm -o deletessp -title <SSP name> -deletedatabases -force e.g.: stsadm -o deletessp -title SharedServices1 -deletedatabases –force Check and delete the web application associated with SSP if it exists. Remove Link from Check and remove “Alternate Access Mapping” associated with SSP if it exists. Check and delete IIS site as well as application pool associated with SSP if it exists. Stop following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search Delete all the databases associated/related to SSP from SQL Server. Reset IIS. Start again following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search Restore the new SSP.   After the SSP restoration, all other stuffs had completed very smoothly without any more issues. I did few modifications to sites for change of server name and finally, the new environment was ready.

    Read the article

  • Developer Training – 6 Online Courses to Learn SQL Server, MySQL and Technology

    - by Pinal Dave
    Video courses are the next big thing and I am so happy that I have so far authored 6 different video courses with Pluralsight. Here is the list of the courses. I have listed all of my video courses over here. Note: If you click on the courses and it does not open, you need to login to Pluralsight with a valid username and password or sign up for a FREE trial. Please leave a comment with your favorite course in the comment section. Random 10 winners will get surprise gift via email. Bonus: If you list your favorite module from the course site. SQL Server Performance: Introduction to Query Tuning SQL Server performance tuning is an in-depth topic, and an art to master. A key component of overall application performance tuning is query tuning. Writing queries in an efficient manner, and making sure they execute in the most optimal way possible, is always a challenge. The basics revolve around the details of how SQL Server carries out query execution, so the optimizations explored in this course follow along the same lines. Click to View Course SQL Server Performance: Indexing Basics Indexes are the most crucial objects of the database. They are the first stop for any DBA and Developer when it is about performance tuning. There is a good side as well evil side of the indexes. To master the art of performance tuning one has to understand the fundamentals of the indexes and the best practices associated with the same. This course is for every DBA and Developer who deals with performance tuning and wants to use indexes to improve the performance of the server. Click to View Course SQL Server Questions and Answers This course is designed to help you better understand how to use SQL Server effectively. The course presents many of the common misconceptions about SQL Server, and then carefully debunks those misconceptions with clear explanations and short but compelling demos, showing you how SQL Server really works. This course is for anyone working with SQL Server databases who wants to improve her knowledge and understanding of this complex platform. Click to View Course MySQL Fundamentals MySQL is a popular choice of database for use in web applications, and is a central component of the widely used LAMP open source web application software stack. This course covers the fundamentals of MySQL, including how to install MySQL as well as written basic data retrieval and data modification queries. Click to View Course Building a Successful Blog Expressing yourself is the most common behavior of humans. Blogging has made easy to express yourself. Just like a letter or book has a structure and formula, blogging also has structure and formula. In this introductory course on blogging we will go over a few of the basics of blogging and show the way to get started with blogging immediately. If you already have a blog, this course will be even more relevant as this will discuss many of the common questions and issue you face in your blogging routine. Click to View Course Introduction to ColdFusion ColdFusion is rapid web application development platform. In this course you will learn the basics of how to use ColdFusion platform and rapidly develop web sites. The course begins with learning basics of ColdFusion Markup Language and moves to common development language practices. From there we move to frequent database operations and advanced concepts of Forms, Sessions and Cookies. The last module sums up all the concepts covered in the course with sample application. Click to View Course Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

    Read the article

  • JDeveloper 11g R1 (11.1.1.4.0) - New Features on ADF Desktop Integration Explained

    - by juan.ruiz
    One of the areas that introduced many new features on the latest release (11.1.1.4.0)  of JDeveloper 11g R1 is ADF Desktop integration - in this article I’ll provide an overview of these new features. New ADF Desktop Integration Ribbon in Excel - After installing the ADF desktop integration add-in and depending on the mode in which you open the desktop integration workbook, the ADF Desktop integration ribbon for design time and runtime are displayed as a separate tab within Excel. In previous version the ADF Desktop integration environment used to be placed inside the add-ins tab. Above you can see both, design time ribbon as well as runtime ribbon. On the design time ribbon you can manage the workbook and worksheet properties, worksheet component properties, diagnostics, execution and publication of the workbook. The runtime version of the ribbon is totally customizable and represents what it used to be the runtime menu on the spreadsheet, in this ribbon you can include all the operations and actions that could be executed by the end user while working with the spreadsheet data. Diagnostics - A very important aspect for developers is how to debug or verify the interactions of the client with the server, for that ADF desktop integration has provided since day one a series of diagnostics tools. In this release the diagnostics tools are more visible and are really easy to configure. You can access the client console while testing the workbook, or you can simple dump all the messages to a log file – having the ability of setting the output level for both. Security - There are a number of enhancements on security but the one with more impact for developers is tha security now is optional when using ADF Desktop Integration. Until this version every time that you wanted to work with ADFdi it was a must that the application was previously secured. In this release security is optional which means that if you have previously defined security on your application, then you must secure the ADFdi servlet as explained in one of my previous (ADD LINK) posts. In the other hand, if but the time that you start working with ADFdi you have not defined security, you can test and publish your workbooks without adding security. Support for Continuous Integration - In this release we have added tooling for continuous integration building. in the ADF desktop integration space, the concept translates to adding functionality that developers can use to publish ADFdi workbooks as part of their entire application build. For that purpose, we have a publish tool that can be easily invoke from an ANT task such that all the design time workbooks are re-published into the latest version of the application building process. Key Column - At runtime, on any worksheet containing editable tables you will notice a new additional column called the key column. The purpose of this column is to make the end user aware that all rows on the table need to be selected at the time of sorting. The users cannot alter the value of this column. From the developers points of view there are no steps required in order to have the key column included into the worksheets. Installation and Creation of New Workbooks - Both use cases can be executed now directly from JDeveloper. As part of the Tools menu options the developer can install the ADF desktop integration designer. Also, creating new workbooks that previously was done through that convert tool shipped with JDeveloper is now automatic done from the New Gallery. Creating a new ADFdi workbook adds metadata information information to the Excel workbook so you can work in design time. Other Enhancements Support for Excel 2010 and the ADF components ready-only enabled don’t allow to change its value – the cell in Excel is automatically protected, this could cause confusion among customers of previous releases.

    Read the article

  • Announcement: Oracle Solaris 11.1

    - by uwes
    On October 3rd at Oracle OpenWorld John Fowler announced Oracle Solaris 11.1 . This first update to Oracle Solaris 11 increases uptime for the Oracle Database: 8x faster database shutdown and start-up Helps DBAs find and resolve I/O issues increasing performance 1.2x Oracle RAC throughput Oracle Solaris 11.1 drives up network utilization by extending network virtualization to include Edge Virtual Bridging and Data Center Bridging that help manage network bandwidth for high priority services and applications. Learn more and share these valuable tools with your customers to encourage them to deploy Oracle Solaris 11.1 Read Press Release here Oracle Solaris 11.1 Data Sheet (PDF) What's New in Solaris 11.1 Oracle Solaris 11.1 FAQs Join the the online web event Oracle Solaris 11 Innovations for your Data Center on November 7, 2012

    Read the article

  • Compiz stop working

    - by Aikanáro
    I'm on a laptop sony vaio, vng-nw330f with ubuntu 11.10. One day I used my computer normally, I shutdown and the other day when I turn on it again, all was different. Compiz effects is not working at all, it doesn't matter what plugin (from ccsm) i enable or disable, nothings happens, nothings changes. I tried next commands: unity --reset unity --reset-icons sudo rm -rf .config .gnome .gnome2 .gnome2_private .compiz .icons .fonts .nautilus .themes .qt .local (from my home directory) gconftool-2 --recursive-unset /apps/compiz-1 I try reinstalling compiz (I remove compiz from software center and installed it again). I have just a couple of weeks using ubuntu, I'm not sure if exist a desktop call it unity 3d, but I think that it's missing. I want the graphics interface of ubuntu 11.10 by default.

    Read the article

  • Randomly placing items script not working - sometimes items spawn in walls, sometimes items spawn in weird locations

    - by Timothy Williams
    I'm trying to figure out a way to randomly spawn items throughout my level, however I need to make sure they won't spawn inside another object (walls, etc.) Here's the code I'm currently using, it's based on the Physics.CheckSphere(); function. This runs OnLevelWasLoaded(); It spawns the items perfectly fine, but sometimes items spawn partway in walls. And sometimes items will spawn outside of the SpawnBox range (no clue why it does that.) //This is what randomly generates all the items. void SpawnItems () { if (Application.loadedLevelName == "Menu" || Application.loadedLevelName == "End Demo") return; //The bottom corner of the box we want to spawn items in. Vector3 spawnBoxBot = Vector3.zero; //Top corner. Vector3 spawnBoxTop = Vector3.zero; //If we're in the dungeon, set the box to the dungeon box and tell the items we want to spawn. if (Application.loadedLevelName == "dungeonScene") { spawnBoxBot = new Vector3 (8.857f, 0, 9.06f); spawnBoxTop = new Vector3 (-27.98f, 2.4f, -15); itemSpawn = dungeonSpawn; } //Spawn all the items. for (i = 0; i != itemSpawn.Length; i ++) { spawnedItem = null; //Zeroes out our random location Vector3 randomLocation = Vector3.zero; //Gets the meshfilter of the item we'll be spawning MeshFilter mf = itemSpawn[i].GetComponent<MeshFilter>(); //Gets it's bounds (see how big it is) Bounds bounds = mf.sharedMesh.bounds; //Get it's radius float maxRadius = new Vector3 (bounds.extents.x + 10f, bounds.extents.y + 10f, bounds.extents.z + 10f).magnitude * 5f; //Set which layer is the no walls layer var NoWallsLayer = 1 << LayerMask.NameToLayer("NoWallsLayer"); //Use that layer as your layermask. LayerMask layerMask = ~(1 << NoWallsLayer); //If we're in the dungeon, certain items need to spawn on certain halves. if (Application.loadedLevelName == "dungeonScene") { if (itemSpawn[i].name == "key2" || itemSpawn[i].name == "teddyBearLW" || itemSpawn[i].name == "teddyBearLW_Admiration" || itemSpawn[i].name == "radio") randomLocation = new Vector3(Random.Range(spawnBoxBot.x, -26.96f), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(spawnBoxBot.z, -2.141f)); else randomLocation = new Vector3(Random.Range(spawnBoxBot.x, spawnBoxTop.x), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(-2.374f, spawnBoxTop.z)); } //Otherwise just spawn them in the box. else randomLocation = new Vector3(Random.Range(spawnBoxBot.x, spawnBoxTop.x), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(spawnBoxBot.z, spawnBoxTop.z)); //This is what actually spawns the item. It checks to see if the spot where we want to instantiate it is clear, and if so it instatiates it. Otherwise we have to repeat the whole process again. if (Physics.CheckSphere(randomLocation, maxRadius, layerMask)) spawnedItem = Instantiate(itemSpawn[i], randomLocation, Random.rotation); else i --; //If we spawned something, set it's name to what it's supposed to be. Removes the (clone) addon. if (spawnedItem != null) spawnedItem.name = itemSpawn[i].name; } } What I'm asking for is if you know what's going wrong with this code that it would spawn stuff in walls. Or, if you could provide me with links/code/ideas of a better way to check if an item will spawn in a wall (some other function than Physics.CheckSphere). I've been working on this for a long time, and nothing I try seems to work. Any help is appreciated.

    Read the article

  • How can I use the Windows key?

    - by torbengb
    The Windows key seems to not have any use in Ubuntu, but since I'm just coming from Windows I'm used to this key having some function. How can I make good use of the Windows key in Ubuntu? I've seen that I can remap keys in SystemPreferencesKeyboardLayoutOptionsAlt/Win key behavior, but I have no idea what the choices meta, super, hyper mean. The help button in this dialog doesn't give any specifics about them. I've experimented a little and found that meta seems to have some use, like Win+M = Me menu, or Win+S is the shutdown menu, but for some keys (B, I) it's more like Ctrl (bold, italic). Haven't found any further. What would a useful setting be for a Linux newbie?

    Read the article

  • SSIS - Connect to Oracle on a 64-bit machine (Updated for SSIS 2008 R2)

    - by jorg
    We recently had a few customers where a connection to Oracle on a 64 bit machine was necessary. A quick search on the internet showed that this could be a big problem. I found all kind of blog and forum posts of developers complaining about this. A lot of developers will recognize the following error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. After a lot of searching, trying and debugging I think I found the right way to do it! Problems Because BIDS is a 32 bit application, as well on 32 as on 64 bit machines, it cannot see the 64 bit driver for Oracle. Because of this, connecting to Oracle from BIDS on a 64 bit machine will never work when you install the 64 bit Oracle client. Another problem is the "Microsoft Provider for Oracle", this driver only exists in a 32 bit version and Microsoft has no plans to create a 64 bit one in the near future. The last problem I know of is in the Oracle client itself, it seems that a connection will never work with the instant client, so always use the full client. There are also a lot of problems with the 10G client, one of it is the fact that this driver can't handle the "(x86)" in the path of SQL Server. So using the 10G client is no option! Solution Download the Oracle 11G full client. Install the 32 AND the 64 bit version of the 11G full client (Installation Type: Administrator) and reboot the server afterwards. The 32 bit version is needed for development from BIDS with is 32 bit, the 64 bit version is needed for production with the SQLAgent, which is 64 bit. Configure the Oracle clients (both 32 and 64 bits) by editing  the files tnsnames.ora and sqlnet.ora. Try to do this with an Oracle DBA or, even better, let him/her do this. Use the "Oracle provider for OLE DB" from SSIS, don't use the "Microsoft Provider for Oracle" because a 64 bit version of it does not exist. Schedule your packages with the SQLAgent. Background information Visual Studio (BI Dev Studio)is a 32bit application. SQL Server Management Studio is a 32bit application. dtexecui.exe is a 32bit application. dtexec.exe has both 32bit and 64bit versions. There are x64 and x86 versions of the Oracle provider available. SQLAgent is a 64bit process. My advice to BI consultants is to get an Oracle DBA or professional for the installation and configuration of the 2 full clients (32 and 64 bit). Tell the DBA to download the biggest client available, this way you are sure that they pick the right one ;-) Testing if the clients have been installed and configured in the right way can be done with Windows ODBC Data Source Administrator: Start... Programs... Administrative tools... Data Sources (ODBC) ADITIONAL STEPS FOR SSIS 2008 R2 It seems that, unfortunately, some additional steps are necessary for SQL Server 2008 R2 installations: 1. Open REGEDIT (Start… Run… REGEDIT) on the server and search for the following entry (for the 32 bits driver): HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC\MTxOCI Make sure the following values are entered: 2. Next, search for (for the 64 bits driver): HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\MSDTC\MTxOCI Make sure the same values as above are entered. 3. Reboot your server.

    Read the article

  • ORA - 01033 Error in Java

    - by user1721921
    Today I am getting below error in J2EE application: java.sql.SQLException: ORA-01033: ORACLE initialization or shutdown in progress at java.lang.Throwable.<init>(Throwable.java) at java.lang.Throwable.<init>(Throwable.java) at java.sql.SQLException.<init>(SQLException.java:53) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289) at oracle.jdbc.ttc7.O3log.receive1st(O3log.java:408) at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:260) at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:365) at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:547) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:347) at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:169) at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:149) at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:95) Can someone please let me know what does that error mean?

    Read the article

  • Webcast Q&A: Demystifying External Authorization

    - by B Shashikumar
    Thanks to everyone who joined us on our webcast with SANS Institute on "Demystifying External Authorization". Also a special thanks to Tanya Baccam from SANS for sharing her experiences reviewing Oracle Entitlements Server. If you missed the webcast, you can catch a replay of the webcast here.  Here is a compilation of the slides that were used on today's webcast.  SANS Institute Product Review: Oracle Entitlements Server We have captured the Q&A from the webcast for those who couldn't attend. Q: Is Oracle ADF integrated with Oracle Entitlements Server (OES) ? A:  In Oracle Fusion Middleware 11g and later, Oracle ADF, Oracle WebCenter, Oracle SOA Suite and other middleware products are all built on Oracle Platform Security Services (OPSS). OPSS privodes many security functions like authentication, audit, credential stores, token validaiton, etc. OES is the authorization solution underlying OPSS. And OES 11g unifies different authorization mechanisms including Java2/ABAC/RBAC.  Q: Which portal frameworks support the use of OES policies for portal entitlement decisions? A:  Many portals including Oracle WebCenter 11g  run natively on top of OES. The authorization engine in WebCenter is OES. Besides, OES offers out of the box integration with Microsoft SharePoint. So SharePoint sites, sub sites, web parts, navigation items, document access control can all be secured with OES. Several other portals have also been secured with OES ex: IBM websphere portal Q:  How do we enforce Seperation of Duties (SoD) rules using OES (also how does that integrate with a product like OIA) ? A:  A product like OIM or OIA can be used to set up and govern SoD policies. OES enforces these policies at run time. Role mapping policies in OES can assign roles dynamically to users under certain conditions. So this makes it simple to enforce SoD policies inside an application at runtime. Q:  Our web application has objects like buttons, text fields, drop down lists etc. is there any ”autodiscovery” capability that allows me to use/see those web page objects so you can start building policies over those objects? or how does it work? A:  There ae few different options with OES. When you build an app, and make authorization calls with the app in the test environment, you can put OES in discovery mode and have OES register those authorization calls and decisions. Instead of doing  this after the fact, an application like Oracle iFlex has built-in UI controls where when the app is running, a script can intercept authorization calls and migrate those over to OES. And in Oracle ADF, a lot of resources are protected so pages, task flows and other resources be registered without OES knowing about them. Q: Does current Oracle Fusion application use OES ? The documentation does not seem to indicate it. A:  The current version of Fusion Apps is using a preview version of OES. Soon it will be repalced with OES 11g.  Q: Can OES secure mobile apps? A: Absolutely. Nowadays users are bringing their own devices such as a a smartphone or tablet to work. With the Oracle IDM platform, we can tie identity context into the access management stack. With OES we can make use of context to enforce authorization for users accessing apps from mobile devices. For example: we can take into account different elements like authentication scheme, location, device type etc and tie all that information into an authorization decision.  Q:  Does Oracle Entitlements Server (OES) have an ESAPI implementation? A:  OES is an authorization solution. ESAPI/OWASP is something we include in our platform security solution for all oracle products, not specifically in OES Q:  ESAPI has an authorization API. Can I use that API to access OES? A:  If the API supports an interface / sspi model that can be configured to invoke an external authz system through some mechanism then yes

    Read the article

  • Problems with HP laptop

    - by Jan
    So the problem is...every time I reboot or shutdown laptop and when the laptop is booting again I get screen (before loading OS) that HP discovered overheating and system went into hibernate. But the point is that laptop is not overheating nor going into hibernate by itself. Also becouse of the hybrid graphic cards I cannot install additional drivers. Desktop resolution and all works perfectly but I cannot use unity 3D also openGL doesn't work as it should (with cairo docks) As i've read some posts, people say that switcheero doesn't work on 12.04 so I haven't tried it.

    Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >