Search Results

Search found 55281 results on 2212 pages for 'j set'.

Page 501/2212 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• Server not sending a SYN/ACK packet in response to a SYN packet

  - by jeff

  Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

  Read the article

• IIS- defining a website as a dev site

  - by Lock

  I am new to IIS. Is there a way during the setup of IIS to have a variable of some sort set that I can use to tell my site that this is the development copy? I am using PHP via IIS 7.5 and would like to have a file with a few lines that define which databases etc is used by my application. Is this the purpose of web.config? I would love there to be a place in the setup of the website where I can set a few variables that are accessibly by my application. That way, when I migrate files to live, I don't need to worry about access details to databases etc.

  Read the article

• variables in batch files

  - by richzilla

  Hi All, Im trying to set up a batch file to automatically deploy a php app to a web server, and basically what i want is an entirely automated process where i would just give it a revision number from the repository and it would then export the files, upload via ftp and then update deployment info at the repo host (codebase). However, im starting from scratch here, and im wanting to know, how would i set up a batch file to accept a variable when it was run, for example typing myfile.bat /revision 42 would enable me to deploy revision 42 to my server. if anyone can point me in the right direction id be very appreciated.

  Read the article

• IIS 6.0 subdomains with host headers and non existent subdomains

  - by Mustafakidd

  Hey Everyone - We have a wildcard A-Record pointing to our IP and have a number of sites running on IIS 6 with host headers and have a a wildcard SSL certificate for the domain so that each site can run under SSL. For example: https://A.foo.com https:/B.foo.com https:/C.foo.com Everything is working well but I noticed that when we type a non existent subdomain, say D.foo.com, it redirects to A.foo.com. Any idea why that is or how I can change that? I think we may have set up the A.foo.com site before we applied the wildcard A-record with our domain provider and before we had set up the SSL cert. Thanks.

  Read the article

• Unable to access internal network through PfSense WAN port

  - by Sean

  Our branch office is unable to connect to our internal network for some reason. However we can connect to the branch office domain controller from behind PfSense. The following is our setup: |Branch DC - 192.168.0.101 | |Branch Firewall - 192.168.0.2 | |(Internet) | |Local Firewall - 192.168.3.1 | |PFSense WAN port - 192.168.3.100 |PFSense LAN port - 192.168.1.1 | | DC1 - 192.168.1.2|DC2 - 192.168.1.4 Branch DC can ping and connect to PFSense WebGUI on the WAN port successfully (we set this up using the PfSense documentation). DC1 and DC2 can connect outbound to the Branch DC. There seems to be a rule that prevents internal access on the WAN port. However our rules are set to allow all traffic on the LAN and WAN ports. It would be ideal to just disable the firewall altogether since we already have a firewall but when we do this, PfSense doesn't allow any internal traffic at all. I look forward to any assistance and thank you ahead of time.

  Read the article

• Mozilla Thunderbird 3.0.10: Messages are being sent back to me

  - by punkinette64

  When I send an email and I get a response, more often than not, in the To: is my email address. However, my email address also ends up in the From: column.The reply-from address is nowhere to be found;so I don't have any address with which I can send my reply, as both of them have just my email address. What am I doing wrong here? Is there some set-up in my Tools Options which is incorrect? The set-up in Options is pretty difficult to understand and it doesn't offer any to or reply-from choices. This is critical because I just cannot answer my emails because there is no one I can send a reply to.

  Read the article

• How to switch users without entering password

  - by torbengb

  I'm a newbie running Ubuntu 9.10. I have two users (wife and me), and each user's screensaver is set to lock so that on wakeup, we get to choose which user's desktop to go to. However, Ubuntu requires a password, so this is pretty tedious. I'd like to switch users without entering any password. I know about this trick that works for the boot login, but it doesn't deal with multiple users. Is it possible to set empty passwords for users in Ubuntu, or skip the password in other ways? (I'm expecting real Linux users to suggest that passwordless users must not get any rights and there be an admin user with a strong password. Yes, you're right. But that's not what this question is about. Thanks.)

  Read the article

• RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

  - by zhallett

  I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

  Read the article

• X11 Forwarding works on Windows with Xming and Putty, but not with ssh command line

  - by seaders

  I have a micro Amazon instance the I want to use for testing and everything is going fine until the title. If I set up all the info in PuTTy, open it up and run 'xclock', all runs perfectly and it opens on Xming on my local desktop. If, however, I run ssh xxxxxxx.amazonaws.com xclock I get Error: Can't open display: If I run either of ssh xxxxxxx.amazonaws.com -X DISPLAY=localhost:0:0 xclock ssh xxxxxxx.amazonaws.com -Y DISPLAY=localhost:0:0 xclock I get the same again, but just after about a 30 second delay. In .ssh/config in Windows, I do have ForwardX11 yes set, and I really can't think of anything more to get this working. The fact that PuTTy is working perfectly, not no matter what I do on the command line, I get absolutely no joy is driving me crazy. Can I even see the commands PuTTy is running somewhere, to see if it's doing some extra magic? The ssh I'm running in Windows is MinGW32's.

  Read the article

• Trying to rename a computer via the netdom command and force a reboot

  - by user57020

  Why doesn't this work? it looks like it will but nothing happens. Option Explicit Dim wshNetwork Dim wshShell Dim PCname Dim Newname Set wshNetwork = WScript.CreateObject("WScript.Network") Set wshShell = WScript.CreateObject("WScript.Shell") PCname = InputBox("Type in the name of the pc you want to rename") Newname = InputBox("Type in the name of the new pc name") wshShell.run("netdom renamecomputer " &PCname& " /NewName:"&Newname& " /reboot:00 " ) 'MsgBox("netdom renamecomputer " &PCname& " /NewName:"&Newname& " /reboot:00 /y")

  Read the article

• Disable Acer eRecovery system

  - by Joel Coehoorn

  The meat of this question is that I'm looking for a way to either require a password before using a recovery partition or "break" the recovery partition (specifically, Acer eRecovery) in a way that I can later "unbreak" only by booting normally into windows first. Here's the full details: I have a set of new Acer Veriton n260g machines in a computer lab. A lot work went into setting up this lab to work well - for example, Office 2007 and other programs needed by the students were installed, all windows updates are applied, and a default desktop is setup. All in all it's several hours work to fully set up one machine. Unfortunately, I don't currently have the ability to easily image these machines, and even if I did I would want to avoid downtime even while an image is restored. Therefore, I've taken steps to lock them down — namely DeepFreeze and a bios password to prevent booting from anywhere but the frozen hard drive. DeepFreeze is an amazing product — as long as you boot from the frozen hard drive, there is no way to actually make permanent changes to that hard drive. Anything you do is wiped after the machine restarts. It lets me give students the leeway to do what they want on lab computers without worrying about them breaking something. The problem is that even with the bios locked and set to only boot from the hard drive, these Acers still have a simple way to choose a different boot source: shut them down and put a paper click in a little hole at the top while you turn it on again. This puts them into the "Acer eRecovery" mode. This by itself is no big deal — you can still power cycle with no impact. But if you then click through the menu to reset the machine (we're now past the point of curiosity and on to intent) it will wipe the hard drive and restore it to the original state. Of course, a few students have already figured this out and reset a couple machines. That's unfortunate, but inevitable. I don't want to destroy the ability to do this entirely (which I could by repartitioning the drives to remove the recovery partition) but I would like a way to require a password first, or "break" the recovery system in a way that I can "unbreak" only if I first un-freeze the hard drive in DeepFreeze. Any ideas?

  Read the article

• Two wim files at grub4dos for USB memory

  - by WindStory

  I have Two wim files at grub4dos for USB memory, the one is win7 pe, and the other one is win 7 installation. This is the menu.lst for my USB. title 1-1. Win7PE \n find --set-root /BOOTwin7peMGR chainloader /BOOTwin7peMGR root title 1-2. Win7 Installation \n find --set-root /bootwin7installmgr chainloader /bootwin7installmgr #title root The Win7PE's wim file is located at "bcd/man7pe_Boot.wim" and "Win7 Installation"'s wim file is located at "sources/boot.wim". But when I click "Win7PE" or "Win7 Installation", usb boots "Windows 7 installation" sreen. Is there any tool for wim boot menu?

  Read the article

• Mount TMPFS instead of ro /dev

  - by schiggn

  I am working on a ARM-Based embedded system with a custom Debian Linux based on kernel 2.6.31. In the final system, the Root file system is stored as squashfs on flash. Now, the folder /dev is created by udev, but since there is no hot plugging functionality needed and booting time is critical, I wanted to delete udev and "hard code" the /dev folder (read here, page 5). because i still need to change parameters of the devices (with ioctl /sysfs) this does not work for me in this case. so i thought of mounting a tmpfs on /dev and change the parameters there. is this possible? and how to do best? my approach would be: delete /dev from RFS create tar containing basic devices mount tmpfs /dev untar tar-file into /dev change parameters Could this work? Do you see any problems? I found out, that you can mount on top of already mounted mount point, is it somehow possible just to take data with while mounting the new file system? if so that would be very convenient! Thanks Update: I just tried that out, but I'm stuck at a certain point. I packed all my devices into devices.tar, packed it into /usr of my squashfs and added the following lines to mountkernfs.sh, which is executed right after INIT. #mount /dev on tmpfs echo -n "Mounting /dev on tmpfs..." mount -o size=5M,mode=0755 -t tmpfs tmpfs /dev mknod -m 600 /dev/console c 5 1 mknod -m 600 /dev/null c 1 3 echo "done." echo -n "Populating /dev..." tar -xf /usr/devices.tar -C /dev echo "done." This works fine on the version over NFS, if I place printf's in the code, I can see it executing, if I comment out the extracting part, its complaining about missing devices. Booting OK mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. System Clock set to: Thu Sep 13 11:26:23 UTC 2012. INIT: Entering runlevel: 2 UBI: attaching mtd8 to ubi0 Commenting out the extraction of the tar mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Thu Sep 13 12:24:00 UTC 2012 ... (warning). INIT: Entering runlevel: 2 libubi: error!: cannot open "/dev/ubi_ctrl" So far so good. But if I pack the whole story into a squashfs and boot from there, it is acting strange. It's telling me while booting that it is unable to open an initial console and its throwing errors on mounting the UBIFS devices, but finally provides a login anyway. Over that my echo's are not executed. If I then log in, /dev is mounted as TMPFS as desired and all the devices reside inside. When I redo the "mount" command to mount the UBIFS partitions it is executed whitout problem and useable. From squashfs VFS: Mounted root (squashfs filesystem) readonly on device 31:15. Freeing init memory: 136K Warning: unable to open an initial console. mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 UBIFS error (pid 484): ubifs_get_sb: cannot open "ubi1_0", error -19 Additionally, a part of the rest of the bootscripts is still exexuted, but not all of them. Does anyone has a clue why? Other question, is 5MB enough/too much for /dev?

  Read the article

• Forwarding email in a specific folder only

  - by Ian

  I ran across a post on Super User that addressed a question about Outlook email forwarding. One user provided a script to utilize. Sub AutoForwardAllSentItems(Item As Outlook.MailItem) Dim strMsg As String Dim myFwd As Outlook.MailItem Set myFwd = Item.Forward myFwd.Recipients.Add "[email protected]" myFwd.Send Set myFwd = Nothing End Sub This worked good for me, but how would it work if I want to just automatically forward email in a specific folder only? The folder already has email auto directed to it upon receipt. Any ideas?

  Read the article

• Newbie one: Virtual Networks - Hyper-V - Remote Destktop - Only one phisical NIC

  - by josecortesp

  Hello everyone, I'll try to explain my situation and I'll apreciate any help: I have a phisical server (quad core, 4Gb ram, 1TB raid 10, etc) with Win Server 2008 R2 enterprise, running IIS, Printing, etc... Also, I want to set up 2 virtual Servers with 2008 R2 standart one with SQL Server and the other with Team Foundation. What i need is: Being able to access from inside the private phisical network, to Remote Desktops on each of the Virtual and the phisical Servers Had Access from the outside, using a router and port Forwarding, to the TFS server and the IIS server (one is virtualized, the other is phisical) This is it, but note that I only have one Phisical Nic. How do I configure this to work. When i set up the hyper-v role, on the wizard something like it showed up but I don't remmember what i choose, and right now, I cannot access none of the servers from remote desktop, not even from the phisical private network. Can anybody point me, what can i do? Thanks in advance (sorry 4 my english, i'm a spanish talker and my english isn't that good)

  Read the article

• How to make PuTTY X11 forwarding work in a screen session?

  - by Alex Howell

  I'm using PuTTY with X11 forwarding enabled, using Xming as my X server on Windows 7. When I SSH to a Linux host, X11 forwarding works fine. If I start a "screen" screen manager session, it still works fine. If I disconnect from the screen session, then later resume in a different PuTTY window using "screen -rd", X11 forwarding doesn't work any more - I get an error: xterm X connection to localhost:11.0 broken (explicit kill or server shutdown). This seems to be because $DISPLAY is different in each PuTTY SSH session (localhost:11.0 in the first session, then localhost:12.0 in the next, and so on). If I manually set $DISPLAY to localhost:12.0 in the screen session, X11 forwarding works again. Is there a way to automatically set $DISPLAY in the screen session, each time it's resumed, so that it always matches the parent PuTTY session's?

  Read the article

• Remote Desktop not following display settings

  - by John

  I have my RDP client set up to use highest settings for connecting to another PC on my LAN, which has display settings 1280x1024x32bit. RDP is specifically set to use 32bit depth, but when I connect it drops to 16bit. The PC I connect to is (amongst other things) used to do some 3D graphics. I don't expect great performance, just to check it works... but it doesn't over RDP, the 3D app doesn't think the hardware is the same. Does RDP's integration with Windows mean it is providing some virtualised rendering system? Should I use something less 'clever' like VNC, to literally screen-grab the contents of the screen without altering the settings?

  Read the article

• Disabling file permissions on NFS share

  - by user41377

  I am trying to set up a nfs share for use by non-technical users, and really don't want file permissions messing things up. Everyone should be able to read/write anything on this share without even knowing what file permissions are, much less adjusting them. Is there a way I can just make the nfs server write everything as 770 or something? It seems like this should be easy, but the best I can come up with is a cronjob to periodically set them to that, which is far from ideal. The server is a Netgear ReadyNAS. Ideally I would like to stick to doing stuff from within the web interface on it, but I can just root it if needed.

  Read the article

• Configure IIS to rewrite IP Address to Site Name

  - by Bath Man

  So i've started my first web site from home, and I'm trying to get it up and running and google crawlable and the like, but I can't seem to figure out how to have my site name returned in the address bar instead of my IP address. I've purchased a domain name for my site on Godaddy and then set it to redirect to my site. When you type in the domain name, you get redirected to http://0.0.0.0/default.aspx (not my real IP obviously), and that stays in the user's address bar. In order to fix that temporarily, I've set up masking on Go Daddy which keeps the URL in the address bar, but just shows my website in a frame. This is fine for users visiting the site, however any kind of automated robot such as GoogleBot cannot discover my content because of the frame. I've looked into ISAPI filters and server-site-rewriting, and the like... but I just can't quite figure out how to do what I need it to do. Any simple suggestions or links would be appreciated.

  Read the article

• Audigy 2 Coaxial to Coaxial/Optical connection possible?

  - by Chris

  Hello, The original question is deleted, and asked again below with accurate information. Edit: Excuse me for my ignorance, my friend has a Logitech Z-5500 set. I thought after comparing those systems on Google images that he had the Z-680, but he hasn't. This set has a single Digital coaxial for DVD or CD players or PC sound cards (requires coaxial cable, sold separately) cable. This single cable was connected to the orange tulip connector (SPDIF coaxial out) on the backside of his onboard HP Elite m9070, this connector is broken. How can I use the digital out with a single cable coaxial cable on the Audigy2 (see image below) (I have the following converters for my disposal, can I use one of these? 3.5 mm male - coax optical mini optical male - toslink optical female 2 x toslink optical female, toslink coupler, optical audio extension note: Is it possible to connect a toslink cable with an mini optical male - toslink converter on the digital out of the Audigy 2? (see image below)

  Read the article

• diskpart on RDM's ...

  - by karnash

  HI, We have ESXi cluster which is attached to clariion CX4 We have windows 2008 R2 as the guest OS. Attahed to this vm is 2 x 1.95T RDM's I select disk 1 create partition primary size=1 (1MB) then list partition Partition ### Type Size Offset * Partition 1 Primary 1024 KB 1024 KB Then I do the same for the other disk and offset is 1024KB I need to present 4T disk to this vm so I right click on disk 1 convert to simple volume then extend it by adding the second disk now when I do list partition, I see the off set is set to 31k. Can anyone please guide me. Thanks

  Read the article

• New Outlook 2003 message, cursor sometimes goes to body, sometimes goes to "To:" field

  - by normalocity

  I've got an Outlook 2003 client that, when you click on "New message", about half the time the cursor defaults to being in the "body" of the message, and the other half of the time it defaults to the cursor being in the "To:" field. Anyone know why this might be happening? Thought it might be related to having Word set, or not set, to be the default email editor, but that had no effect. Also, this particular user reports that, on their previous machine, it always defaults to the "To:" field. I happen to still have that machine around, unmodified from when it was removed from the, and they are correct - it never goes to the body. I also read that some people had this issue and turned off the "Outlook today" feature to fix it, with mixed results. However, in this case the "Outlook today" feature isn't even turned on.

  Read the article

• Lan, vpn on Amazon EC2, how to?

  The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

  Read the article

• IP Forwarding and Routing in Windows 2008

  - by Danialzo

  I have Hyper-V running on a windows 2008. I got a new ip stack from the data center to be set on my virtual machines. But I have difficulties to set these IPs on my VMs because they are on different network. my current server ip is xxx.xxx.18.6 with MASK : 255.255.255.224 and the GW is xxx.xxx.18.1 my new ip stack is xxx.xxx.168.176/29 I can use RRAS to achieve this. Do I need to create another NIC? How do I make these VMs reachable from outside?

  Read the article

• MSDeploy - possible to call setAcl on multiple destinations in one go?

  - by growse

  I'm building a nice little continuous integration environment for our development team, based on TeamCity. It's working rather nicely, as it can build a mix of .NET and PHP projects, and push them to our internal and external platforms. I'm primarily using MsDeploy to push everything to the internal platform, as that's all IIS based. However, there's a number of builds where I need to set directory permissions on the destination directory. I can use the setAcl operator just fine, but that only seems to take a single destination as an argument. Therefore, if I need to alter the permissions on 5 destination directories, I need to call MsDeploy 5 times, which seems a lot of overhead. Is there a sensible way around this? Reading the documentation, I don't think MsDeploy takes more than a single argument for the setAcl operator, but could be wrong. Is there a better way for a build server to set multiple directory permissions in one go?

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >