Search Results

Search found 18842 results on 754 pages for 'machine'.

Page 501/754 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• How to connect to my own WiFi using Broadcom STA drivers?

  - by Chris

  I'm trying hard to switch to Linux from Windows because of my engineering project. Unfortunately, everything is against that change! Before I have installed Broadcom STA proprietary drivers, I was seeing on NetworkManager and nm-applet only local radio-internet-access networks. After I installed Broadcom STA, I see my neighbor's wireless network (channel 11, WEP) Neither before nor after the installation is own wireless network available. Computer: Asus Lamborghini VX6 Ubuntu: 12.04 LTS 64-bit Router: ASUS N55U (A1) with newest AsusWRT firmware Network: Channel 5 (tried also 10 and 11, both on 20 and 40MHz bands), WPA2 Personal, 2,4 + 5 GHz (what is not very important, 'cause the wlan card in VX6 is only 2,4GHz). Network works fine on Windows, also through D-Link repeater on the other floor. Unfortunately, same network is invisible to Ubuntu on same machine. I have tried some combinations with other GUIs but it did not work. Are there any better drivers for Ubuntu? I need that network badly, but I'm an Ubuntu newbie, so I don't know how to solve that problem. Please help.

  Read the article

• What would be a good topic for research on "edge of multiple processors / computers programming" topic?

  - by Kabumbus

  This is a subjective discussion so we can express our dreams and hopes here. A "topic" must be like a task with point to have as end result a software poduct. A "topic" must be mainly about "Software engineering", "Algorithm and data structure concepts" and perhaps "Design patterns". I mean let us try to look what is not already there? What can be developed in fiew month and give a breakthrue / start a new leap / show somethig not realized before in science of f multiple computers programming? What i see is already there: LAN / wire and other infrastractural programms for connecting on device level MPI/ Bit torrent/Jabber protocols / APIs / servers for messaging on top Boost and analogs on evry OS in most languages for multithreading there are lots of CUDA like on computer frameworks for fast calculating on computers GPUs What I personally do not see out there is a crossplatform framework for multiple processes interaction. Meaning one that would allow easy creation of multyple processes running in paralell inside one hoster app on one machine. In level not harder than needed for threads creation (so no seprate server apps - just one lib doing it all) Is there ny such lib and what can you propose for research topic?

  Read the article

• Roaming Profiles: Best Practices

  - by Noah Clark

  I want to setup roaming profiles for about 50 users. What is the best way to go about doing this? What are the best practices. I've read about desktops/my Documents being TOO big. How big is too big? We have a few users who keep a lot of media on their machine to listen to throughout the day. I would imagine they have a few gigs of MP3's in their My Documents folder. How do you deal with this? Thanks!

  Read the article

• Behaviour of disabling "Allow non-administrators to receive notifications" GPO

  - by Jaymz

  Hi everyone, As the title suggests, I'm trying to figure out the specific behaviour of the following GPO when disabled: Administrative Templates Windows Components Allow non-administrators to receive update notifications We've just started using WSUS, and have added a few machines for testing. At the moment, this is set to Enabled. The problem with this setting is it seems to allow users to opt out of certain updates if they deselect the checkbox after hitting custom install. My main concern with disabling this setting is this: Does it stop non-admins from getting the installs deployed to them? My guess would be that it will just install them silently at the set scheduled time, suppressing any prompts and ensuring they don't get the opportunity to cancel them (this is what I want). My worry is that non-admin users will never get updates pushed to them unless an admin goes and logs on to their machine (not what I want, and seems like a silly situation to be in). Thanks in advance, Jaymz.

  Read the article

• Getting More Performance out of a MacBook Pro

  - by 5arx

  So I've got a mid-2009 MacBook Pro 13". Integrated GPU so not a games machine but fast enough for doing .Net development in VMs. I love the little thing and wanted to give it a Christmas present so thought I'd mod it up a bit and give it a boost. I'm thinking of swapping out the stock 5400rpm HD with a faster hybrid drive (has 4GB RAM and spins at 7200rpm) but was wondering if any of you had tried or knew of anything else I could change/upgrade/mod to squeeze more out of my laptop. Before you answer though, please be aware that I'm not sure I can run to putting in the 8GB of RAM Apple have suggested :-( Thanks in advance.

  Read the article

• Open NetApp CIFS Share

  - by kingfish

  I have a CIFS share on a NetApp device. I want this share to be completely open to any user/computer on the same network. I don't want any authentication (domain, workgroup, etc) required; no login/password should need to be provided. Currently I have CIFS configured to use "Domain - Windows 2000" authentication and have the permissions on the share set to "Everyone - Full Read/Write" but if you try to connect to it from a machine that isn't bound to the domain it is asking for login info.

  Read the article

• Dummy SMTP server as a service

  - by levidos

  Hello, I have a Windows Server 2008 machine with IIS installed which is hosting a webapp that is sending some notification mails once-in-a-while. What I'd like to do is to monitor the email sent by the application. For this I need a dummy SMTP server which intercepts messages but won't send them further but save them locally on the hard disk.I've already found some of them like Papercut, SMTP4Dev. The problem with these that I have to be logged on the server all the time which is not suitable because the server has only 2+1 TS connections. I like to run a program like these as a windows service and check the mails when I need them. Any suggestion is much appreciated. Best Regards,Levente Rog

  Read the article

• How can I VPN into a domain and act as if it is local?

  - by Duall

  I've looked and looked and the internet seems to have finally failed me, there's no information on my specific issue. I have two locations, and one server (sbs 2008); I need them to act like one physical LAN. I know it's possible, I just know how to set it up, or anything about VPNs, etc. So, just to clarify a bit more: 1 Small Business Server 2008 ~30 Computers with varying systems from Windows XP to 7 2 Physical Locations I use redirected folders, but since that would consume a lot of bandwith over VPN, I have a machine over there that can be the workhorse for storage. Users need to access e-mail and shared databases from this server (or possibly some form of DFS with aforementioned workhorse) from the other building. Is there a nice tutorial (or I nice person that wants to write it) online that can explain how to set up computers from an external network to act like they were in the LAN?

  Read the article

• how to master in Windows administration [closed]

  - by Mateusz

  what is, in your opinion, best way to become real Windows, advanced administrator? Of course it's possible to obtain MS Certificates, but they're rather very expensive. Almost two years of everyday working on Linux machine, teach me, that it's very important to read system logs. Anyway, I assume that it's enough - I think that you must be familiar with almost any hive in you registry and each trick in Windows CMD and VBS- although it's high time for PowerShell, still on many maschines, you have only an opprotunity of using CMD by default (and their owners are reluctant to install anything else). How I can accomplish this task? Which groups follows (superUser - it' obligatory), which articles read?

  Read the article

• Debian, CentOS, Slackware, FreeBSD, OpenSolaris and Ubuntu Server Edition: Which one to use for an http web server?

  - by Ako

  I am going to install and administrate a virtual server for a small university. The server should run inside a virtual machine (VirtualBox OSE). It is only used in the university network and is invisible to the outside world. It should run Apache web server for PHP, MySQL and probably a mail server. I don't know which OS to use. Main criteria for choosing include ease of administration and updating, package management and performance. I wonder if anyone has any suggestions? And candidate OSs are: Debian, Ubuntu, CentOS, Slackware, FreeBSD, OpenSolaris. Add any other OS if you know any better alternatives.

  Read the article

• How do I use XQuartz with ssh on OS X?

  - by cwd

  I've downloaded the latest stable version of XQuartz on my Snow Leopard machine, and I'm trying to make an ssh connection with X forwarding but X11 keeps opening. How can I get OS X to use XQuartz? I had X11 installed I downloaded and installed XQuartz X11 is not open / running XQuartz is open and running I try and connect to a remote system using iTerm2: ssh user@remote -X X11 opens. XQuartz is still open, but I doubt it is doing anything. I also tried moving X11 to the trash but then the ssh connection will not complete, even though XQuartz is open. I also get the two warnings which I don't understand how to fix, even after reading the ssh man page. Warning: untrusted X11 forwarding setup failed: xauth key data not generated Warning: No xauth data; using fake authentication data for X11 forwarding.

  Read the article

• Mirroring svn repository

  - by cardy

  I have an svn repository and I'd like to have it duplicated over multiple machines for availability purpose. By now when my vps goes down, I'm unable to connect to repository and this is very annoying. Easiest (and expansive) solution is to setup two identical machine and make them work like clones. I'd like to know if there are any alternative (involving 2 machines). Ideally I would have two vps in different datacenters, so if one goes down I can rely on the other. Thanks. I need a mirror both for read and write not only for read. Svn Repos are berkley-db based

  Read the article

• VirtualBox CPU usage 100% on host

  - by Sarveshwar

  I have installed VirtualBox 3.1.2 (latest) on my Windows 7 (x64). In the VirtualBox I've installed Windows 7 (x64). I have 4 GB RAM installed. The guest has been assigned a 1536 MB RAM. Sometimes the CPU usage on the host goes 100%. It happens everytime, in a few minutes, after starting the guest. Then it stops responding. Then I have to "power off the machine" from the menu without doing a proper shutdown. It happens with Windows XP as guest too (even when the RAM amount assigned to it was the same). What is the problem?

  Read the article

• apache requests failing

  - by Josh

  I'm trying to figure out why sometimes the client fails to load objects/requests from a dynamic page served from Apache/MySql/Debian machine. Let's say 13 objects are to be loaded for a total of 185.3 KB load, with no external objects (no DNS lookups) and no other traffic at the same time, randomly some of those object do not load. However, if I perform a refresh, sometimes all of them load or some might fail again. I only have 1Mbps/up and my DNS is been hosted externally (everydns). What could be the reason of this issue? Any comments will be appreciated.

  Read the article

• What You Said: How You Set Up a Novice-Proof Computer

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your tips and tricks for setting up a novice-proof computer; read on to see how your fellow readers ensure friends and relatives have a well protected computer. Image available as wallpaper here. If you only listen to a single bit of advice from your fellow readers, let that advice be the importance of separate and non-administrative user accounts. Grant writes: I have two boys, now 8 and 10, who have been using the computer since age 2. I set them up on Linux (Debian first, now Ubuntu) with a limited rights account. They can only make a mess of their own area. Worst case, empty their home directory and let them start over. I have to install software for them, but they can’t break the machine without causing physical damage (hammers, water, etc.) My wife was on Windows, and I was on Debian, and before they had their own, they knew they could only use my computer, and only logged in as themselves. All accounts were password protected, so that was easy to enforce. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• VNC-like remote control over home network

  - by Widor

  I'm aware of how to use VNC to share screens or grant remote control of your machine over the internet by using VNC or one of the web-based "go to my pc" type services. If two computers are connected to a router (i.e. standard home network), is there an easier way of viewing and controlling one computer from the other? I'd like to avoid going outside the LAN, onto the internet, then back in if possible. Both machines are Windows XP, but I'm not looking for Remote Desktop by the way.

  Read the article

• Is there a simpler way to log into a local account on a domain workstation?

  - by David

  Occasionally I need to log into a local machine account on a Windows workstation joined to our domain. The syntax for specifying a domain account looks like this: DOMAINNAME\myusername whereas the syntax for logging into a local account is HOSTNAME\myusername The problem is that I often don't know the host name off the top of my head. It is possible to find out by clicking the "How do I log onto another domain" link, but this requires me to memorize or write down an often cryptic hostname. Is there another, simpler way to do this?

  Read the article

• design an extendible and pluggable business logic flow handler in php

  - by Broncha

  I am working on a project where I need to allow a pluggable way to inject business processes in the normal data flow. eg There is an ordering system. The standard flow of the application is A consumer orders an item. Pays for it and card is authorized. Admin captures the payment. Order is marked as complete and item is shipped. But this process may vary (extra steps in between) for different clients. Say a client would need to validate the location of the consumer before he is presented with a credit card form, OR his policies might require some other processes in between. I am thinking of using State Pattern for processing orders, saving the current state of the order in database, and initializing the state of order from the saved state. I would also need some mechanism, where a small plugin would be able to inject business specific states in the state machine. Am I thinking the right way? Are there already implemented patterns for this kind of situation? I am working with Codeigniter and basically this would mean for me, to redirect to proper controller according to the current state of the order. Like, if the state of the order is unconfirmed then redirect the user to details page and then change the state to pending. If some client would need to do some validation, then register an intermediate state between unconfirmed and pending Please suggest.

  Read the article

• Clearos open vpn vs windows open vpn client where client connects with no default gateway

  - by Paul

  Am using clearos as open vpn server and configured my users on windows machine with open vpn client. My problem is that users connect to the server without a default gateway and also with ip conflicts, i can ping the server but i can not ping any user behind the server. please any one can help to find out what causes the clients to connect without a default gateway and also not to be able to ping any user behind the clearos open vpn server. Help with a step by step guide of installing open vpn on clearos and open vpn clients on windows. Thanks

  Read the article

• Auto-connect Bluetooth headphones in Windows 7 64bit

  - by CptSkippy

  I have a pair of bluetooth headphones that I've successfully paired with my Windows 7 64bit machine and audio plays through them without a hitch. On the Device Stage under the properties of the headphones in troubleshooting it shows "last connected" as "currently connected" even if I power cycle the headphones or after a reboot of my computer. So the Windows bluetooth stack has no trouble finding them. The problem I have is that whenever the headphones reconnect to my pc they show up as disconnected in the Sound Settings and no sound is routed to them until I manually connect them. I have to go into Sound Settings, then from the Playback tab right click on the headphones and choose the Connect option. Is there a way to make the Sound Settings connect automatically whenever the headphones are available to Windows?

  Read the article

• Why is idle windows VM using so much CPU?

  - by Jeff Shattock

  I have 2 VMs running as guests on a KVM virtualization platform running on Ubuntu 10.04. One VM is an Ubuntu 10.04 system, the other is a Windows 7 system. When both machines are completely logged out, the Linux machine uses 1% CPU, the Windows one 45-50%, according to top. The graphs in virt-manager seem to back this up. Theres nothing installed on the Win7 image that would be running in the background; its as fresh as can be. Why is the Windows VM using so much more than the Linux VM, when both are logged out and idling?

  Read the article

• why doesn't my computer resume after sleeping overnight?

  - by bamdad

  i'm having a weird, weird bug that's been haunting me since 11.10. if i listen to music or watch a video and my computer automatically goes to sleep at night, it won't properly resume in the morning. otherwise, suspend and resume works just fine. what happens is that the wi-fi and bluetooth indicator (that turns from white to orange when suspending) stays orange, the display doesn't turn on, and the only option i have is to hard reset the machine. here's what i've tried so far: installing (and uninstalling and reinstalling) laptop-mode-tools switching the proprietary wireless driver (broadcom-wl) to the open source one (brcmsmac & bcma) and back unloading (and blacklisting) all bluetooth modules (rfcomm, btusb, bnep, bluetooth) and stopping (# stop bluetooth) and disabling (# echo 'manual' /etc/init/bluetooth.override) the bluetooth service creating a custom pm sleep action as suggested here: http://ubuntuforums.org/showthread.php?p=11926504 not watching youtube / any stuff that uses flash before going to sleep (i have flashblock, and i checked $ ps aux | grep flash) because i suspected flash to be the culprit trying out different versions of fglrx (the one from the repos, then installing the latest one from amd's site via generated .deb files, then back to the official ones) none of these worked. i remember back in the days of 10.04, there was a gconf key called network sleep: i thought about disabling that, since re-enabling the wireless card seems to be the problem (according to the indicator led), but the option appears to be missing from gnome 3 (unity-2d, whatever). does anyone have any ideas? thanks, bamdad

  Read the article

• How do I turn off caching in IIS7?

  - by jammus

  Hello. I'm developing an ASP classic site under Windows 7 (form a queue ladies). The problem is IIS seems to be heavily making use of its cache for both static and dynamic content which really conflicts with my 'make a small change, alt-tab, hit ctrl-F5' development style. Changes made to .asp files may take two or three refreshes to show up where as changes to .js files can take 20 times as many. How do I go about turning the caching off on my development machine? Cheers. in b4 stop using asp classic

  Read the article

• How do I stop ssh-agent from forgetting my password after I login to the screen session from SSH?

  - by Shwouchk

  I have a screen session open in an lxterminal window. If I SSH somewhere, the first time it happens, an ssh-agent window opens and asks me for my private key passphrase, and after that ssh goes right on. If I log in from outside to this machine and attach to the screen session however, ssh-agent now asks me every time I connect for my passphrase, in the terminal. Is there a way to avoid this and to let it continue using the X agent, or at least to have the non-X agent remember the passphrase?

  Read the article

• Virtual MS Sql Server not consuming enough CPU

  - by rocketman

  We have a Win2008 server 32 bit running as a virtual machine under ESX server. It has 6 CPU cores of 2Gz each and 4GB ram. It's running MS Sql Server 2008 R2 only. Problem: The server is heavily loaded and responds slowly. From windows taskmanagers point of view, it really looks overloaded, CPU wise. However, our external "cloud manager" says it's only using 2.5GHz worth of CPU-cycles in the cluster. I/O times looks "good". We have already tried to set the SQL servers number of working threads from 0(auto) to 256, to no effect. How to tune the VM host, guest or SQL to use all of it's alotted resources? Does it sound possible att all?

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >