Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 507/1213 | < Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >

• How to set up an ethernet and wireless network using /etc/network/interfaces?

  - by den-javamaniac

  Hi. Currently I have ethernet and wireless networks configured through a network manager (further NM) but it seems to be a bit buggy (I need a different MAC for ether which is never applied if using NM), so I would like to move all the network configs to interfaces file. I know (or can google for) configuration code, but I'm not sure how NM works and it looks like it overrides interface config. Please advice, how I can handle this issue. NOTE: I also would like to be able to locate and connect to various wireless networks but not sure how to do it.

  Read the article

• Where is a postgresql 9.1 database stored in ubuntu 12.04?

  - by celenius

  I installed and created a Postgresql database on ubuntu. I then created the database using the following command: sudo su postgres createdb mydatabase However, I can't figure out where the database was initialized. I would like to be able to edit the hba.conf file and postgresl.conf files. When I view the database using pgadmin I see the following information: CREATE DATABASE mydatabase WITH OWNER = postgres ENCODING = 'UTF8' TABLESPACE = pg_default LC_COLLATE = 'en_US.UTF-8' LC_CTYPE = 'en_US.UTF-8' CONNECTION LIMIT = -1; Any thoughts on how I can find the database cluster location?

  Read the article

• Error: kernel headers not found. (But they are in place)

  - by Guandalino

  I'm trying to install the Guest Additions in VirtualBox 4.04. Host OS is Ubuntu desktop 11.04 64bit, guest OS is Ubuntu server 11.10 64bit. $ sudo ./VBoxLinuxAdditions.run After some output this line is printed: The headers for the current running kernel were not found. But the headers are installed, at least accordingly to dpkg: $ dpkg --get-selections | grep linux-headers linux-headers-3.0.0-12 install linux-headers-3.0.0-12-server install linux-headers-server install The running kernel is: $ uname -a Linux foobar 3.0.0-12-server #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 x86_64 x86_64 X86_64 GNU/Linux How do I fix things so that Guest Additions installer is able to find kernel headers? Update: added full output. The headers for the current running kernel were not found. If the module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Installing the Window System drivers ...fails! (Could not find the X.Org or XFree86 Window System). I don't care for fail #2, because that's a server and I don't need X server. But I need shared folder support. Some further detail: $ tail /val/log/vboxadd-install.log .......... cc1: some warnings being treated as errors make[2]: *** [/tmp/vbox.0/vfsmod.o] Error 1 make[1]: *** [_module_/tmp/vbox.0] Error 2 make: *** [vboxsf] Error 2

  Read the article

• Tried to install some software, it says some packages are damaged, cannot fix them

  - by lempira

  So, I go to the Ubuntu Software Center, as soon as it opens, a window pops up with the following text: "Items cannot be installed or removed until the package catalog is repaired. Do you want to repair it now?" Then I click the "Repair" button, then a new window pops up with the following text: "Package operation failed. The installation or removal of a software package failed." Then I click on the "Details" button, which returns me the following text: installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (2) dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. What should I do?

  Read the article

• Fuji camera "mounts" but folder not in Dolphin After Kubuntu 13.10 upgrade

  - by user207207

  Fuji camera mount reported in attached devices but not visible in Dolphin After Kubuntu 13.10 upgrade Have reinstalled the driver, and a few other suggestions, for other cameras mounts failing on previous Ubuntu upgrades. I have already spent a couple of hours trying to get my photo's off the camera, very annoying. Worked perfectly in 11.04, 11.10, 12.04, 12.10 and 13.04. dmesg | tail; lsusb; lsb_release -a [ 6181.858786] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90009400000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396236] CPUM: APIC 00 at 00000000fee00000 (mapped at ffffc90000c6a000) - ver 0x80050010, lint0=0x10700 lint1=0x00400 pc=0x00400 thmr=0x10000 [17261.396239] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90000c72000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396241] CPUM: APIC 02 at 00000000fee00000 (mapped at ffffc90000c70000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396255] CPUM: APIC 01 at 00000000fee00000 (mapped at ffffc90000c6e000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [32456.884907] usb 2-5: new high-speed USB device number 2 using ehci-pci [32457.654046] usb 2-5: New USB device found, idVendor=04cb, idProduct=01e8 [32457.654050] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [32457.654052] usb 2-5: Product: Digital Camera [32457.654053] usb 2-5: SerialNumber: 4C3230302020091117CAA59WP18548 Bus 002 Device 002: ID 04cb:01e8 Fuji Photo Film Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 2013:024f PCTV Systems nanoStick T2 290e Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub No LSB modules are available. Distributor ID: Ubuntu vissibleDescription: Ubuntu 13.10 Release: 13.10 Codename: saucy sudo apt-get install gvfs-bin gvfs-mount gphoto2://[usb:002,002] Error mounting location: Error initializing camera: -108: No such file or directory ...... I have reported a bug in Dolphin, which has been transferred to Solid. Further information : I ran solid-hardware list details udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:04.1/usb2/2-5' parent = '/org/kde/solid/udev' (string) vendor = '04cb' (string) product = 'Digital Camera' (string) description = 'Camera' (string) Block.major = 189 (0xbd) (int) Block.minor = 137 (0x89) (int) Block.device = '/dev/bus/usb/002/010' (string) Camera.supportedProtocols = {'ptp'} (string list) Camera.supportedDrivers = {'gphoto'} (string list) I still can't get my photo's off, I can see the folders using the Gimp menu. If anyone has got any ideas, I'm willing to try them.

  Read the article

• No Sound from Shared Media

  - by Travis

  I have a shared media folder that I have all of my mp3's in. When I try to play them using Ubuntu, I get no sound, but the media player (Rhythmbox, Exaile, etc) display that they are playing the file, it looks like everything is playing but no sound. I have checked and rechecked the volume levels of the system and each application and I see no issues. If I move a file to the local drive, it plays just fine. I do sound checks while the file is playing and I get audio (front left, front right) from the test but not from the media file that I am playing. Any help would be greatly appreciated.

  Read the article

• Open with Wine/Photoshop not working properly

  - by Kendor

  I am running Photoshop CS2 under Ubuntu 10.10 with Wine 1.3.23. I would like to be able to associate various file types with Photoshop. I'd previously used this script: #!/bin/sh QUICKPARLOCATION="c:\\Program Files\\Adobe\\Adobe Photoshop CS2\\Photoshop.exe" PARAM=`winepath -w "$*"` wine "$QUICKPARLOCATION" "$PARAM" exit 0 If I make this script be the customer command that's tied to "Open With," Photoshop launches, but doesn't appear to be properly passing the file name, so that file doesn't open. I'd had this working previously under earlier versions of Ubuntu and wine. P.S. please no commentary on using GIMP or other Photoshop alternatives

  Read the article

• ubuntu 12.04 broken

  - by Gaurav

  I installed PPA package for BITdefender but somehow the package got broken. Because of this I was not able to boot Ubuntu in normal mode. So i booted in recovery mode and completely removed the broken package using synaptic package manager. But even after removing the broken package I'm unable to boot in normal mode. Everytime i try to boot in normal mode I'm greeted with a black screen! Is there any way to fix this?

  Read the article

• How to disable Gnome-Shell auto-open in Dashboard

  - by user48027

  I am personalising my Gnome-Shell in Ubuntu 11.10 I would like to disable the feature to open the Gnome's Dashboard when I close the last Window in a Workspace. Edit to clarify: The dashboard is available only in GNOME Shell. The dashboard opens if you press the windows key (aka SUPER) or if you move the mouse to the upper left corner. If you close the last window of a workspace, but there are open windows on other workspaces, the dashboard opens automatically. The latter behaviour is annoying if you do not want to use the dashboard to open new windows or to change workspace. There are many ways to to both (Gnome do, Docky, keyboard shortcuts, clicking on something on the desktop, ...). Edit: There is a related Q&A, which was closed because the asked the same question for Mint: How can I prevent the activity view for opening when I close the last running app?

  Read the article

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• Ethernet Wired Connection Help

  - by user107598

  I have recently installed Ubuntu 12.10 onto my Dell Inspiron N5010 and Ive been all over many forums trying to figure out how I can get my ethernet cable to be recognized so I can set up a wired connection. My Network Card is the Realtek RT8139 and from what Ive gathered the ethernet port driver for it is installed. Whenever I run ifconfig in the terminal it says that eth1 is up and running but no matter how I edit the connection I cannot get it to work. If anyone can help it would be greatly appreciated!

  Read the article

• How to set an old view? [closed]

  - by xan

  Possible Duplicate: How to revert to GNOME Classic? is it possible to change general view in Ubuntu 12.04 so it was like in Ubuntu 10.04? I really liked old one and really don't like new one. Things that are annoying me: menu on the left with large icons lack of workspaces icons in right bottom corner lack of menu: Applications, Places, System in left top corner menu like: file | edit | view | help resize and red cross is available in all applications at the very top of the pulpit, unless at the very top of the application window I know it may sound crazy, but that's all me, don't like changes despite that I know they are often good. I would be very grateful for any help. I really want old view (exactly like here: http://upload.wikimedia.org/wikipedia/commons/2/2d/UbuntuMaverickDesktop.png) back. By the way, if I installed Ubuntu 12.04 by WUBI from Windows level on separated partition, then what is the easiest way to uninstall it? Can I simply format this partition? I'm wondering because I don't know if it is safe, what about boot loader etc.

  Read the article

• Recovery from hell - undeleting partition overwritten by Xubuntu 12.10 installer?

  - by DaimyoKirby

  This is turning into a nightmare - following my initial recovery of my two partitions, I went to install Xubuntu 12.10 (again). At this time I had two partitions - one of ~39 GB had Zorin OS 6 installed on it, and another of ~33 GB had nothing installed, just a few files in it that I had manually backed up (moved) there. When I got to the partitioning step, I chose "Replace Zorin OS 6 with Xubuntu 12.10", along with LVM, naturally thinking that the installer wouldn't touch the second partition, since Zorin wasn't installed on it. I was dead wrong. Upon booting my newly installed Xubuntu 12.10, I found in gparted that there were only two partitions - ~255MB, which appears to have the boot stuff in it (it's flagged boot in gparted), and another of ~74 GB. Question: Is there any way to salvage my old files on the non-Zorin ext3 partition? I'm really upset I made such a dumb move (again...), and any and all help is appreciated very, very much!

  Read the article

• Mysql not starting - innodb not found

  - by Rob Guderian

  I have a fresh install of ubuntu 12.04 server edition and mysql server is not starting properly. I did a simple apt-get install apt-get install mysql-server But, it's failing with this error message root@test:~# mysqld 120618 20:57:32 [Warning] The syntax '--log-slow-queries' is deprecated and will be removed in a future release. Please use '--slow-query-log'/'--slow-query-log-file' instead. 120618 20:57:32 [Note] Plugin 'FEDERATED' is disabled. 120618 20:57:32 InnoDB: The InnoDB memory heap is disabled 120618 20:57:32 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120618 20:57:32 InnoDB: Compressed tables use zlib 1.2.3.4 120618 20:57:32 InnoDB: Unrecognized value fdatasync for innodb_flush_method 120618 20:57:32 [ERROR] Plugin 'InnoDB' init function returned error. 120618 20:57:32 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 120618 20:57:32 [ERROR] Unknown/unsupported storage engine: InnoDB 120618 20:57:32 [ERROR] Aborting I can start the server with the "--skip-innodb --default-storage-engine=myisam" flags, but would like to use innodb. Does anyone know what the issue here is?

  Read the article

• I can't enable extra effects in Ubuntu 10.10. Please help?

  - by jasoncruz98

  I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

  Read the article

• Non-Full-Screen Application Launcher in Gnome 3?

  - by Jeff

  I'm trying out Gnome Shell in 11.04. You can push the "activities" key to get into the overview where you can launch applications. I like the idea of the overview as an aid in switching focus, but it's too slow for just launching an application. Is Gnome Shell going to implement, or does it have, a way to launch applications (besides the alt-f2 command launcher) that is as quick as Gnome-do? edit: To be clear, I'm aware of several Gnome application launchers. I'm curious about the Gnome Shell and any packages it includes (not add-ons like Gnome-do or Synapse).

  Read the article

• Choppy USB mice on just one of USB ports

  - by user20532

  I've got Lenovo b560 laptop with latest, properly updated Kubuntu on it (11.04 natty, kernel 2.6.38-8-generic). It has three USB2.0 ports onboard. I usually plug a mouse into one of them (I've got 3 different mice - in office, at home and for when on the go). Sometimes, usually after laptop awakening from sleep, the mouse still works but cursor movements are choppy, as if the processor was extremely loaded (it's usually not). I found that if I re-plug the mouse cord into the other USB port, it works just fine. If I plug it back to problematic port, it is still choppy and remains choppy until next boot. Of course I want my mice to always work fine. Problem is: I cannot reproduce this behavior for sure, it happens sporadically but regularly. I use different USB ports (problem has ever happened on each of them since), I use different mice (each has failed me this way at least once), I cannot generally find what exactly is going wrong and why plugging to different port fixes the mouse instantly. So I'd like to hear at least clues where to look at, what to try to identify my problem. A bit of update: while beginning this post, I had the issue once again. I have just replugged the mouse back to problematic port and it is not recognized at all. On the other port it works smoothly.

  Read the article

• Freezes if desktop effects is used.

  - by munir

  I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

  Read the article

• using curl command to download file in parts from different interfaces and to run the commands simultaneously from a script

  - by jsjain007

  i wanted to download a file using curl command simultaneously in different parts using ip aliasing(virtual Ethernet ports) so what i did was pasted the commands in a text file and run but the problem as obvious since it is in a file the commands will be executed one by one so is there a way to run all those commands simultaneously. here is the command curl --interface eth0:0 --range 0,38010880 http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part1 curl --interface eth0:1 --range 38010880 ,- http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part2 cat kinsoft-office.part*>kinsoft-office can anyone help me to run these above 2 commands simultaneously from the script so as to increase download speed

  Read the article

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Installing along side of Windows 8

  - by Jake

  It appears as though many people are having problems installing Ubuntu along side Windows 8. My problem, however, seems to be sufficiently different to be unique among such problems. I can't get the Ubuntu 12.10 live-USB installer to run. When I boot I get the following four options: Run from this USB Install to disk Check memory (I can't remember the last one) I have tried the top two. Both result in the screen going black briefly then windows 8 booting as per usual. Does anyone know how I may manage to overcome this problem?

  Read the article

• Vmware 3D Acceleration Ubuntu 14.04

  - by Bowser5543

  I have installed Vmware Player 6.0.3 build-1895310. The problem I have is that when I run a Windows 7 Vm, it says that 3D support was disabled. (I can't read the exact report atm because it has a chance of crashing my machine.) I have the 3D support box enabled. Here is my graphics card: Mobile Intel® GM45 Express Chipset x86/MMX/SSE2. Can anyone tell me to install drivers or something? I can't find mine anywhere!

  Read the article

• FTP gives me a error when uploading and deleting files [on hold]

  - by AR Games

  Here's the error I get when trying to delete files... Command: DELE index.html Response: 550 Delete operation failed. Here's the error I get when trying to upload files... Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Starting upload of C:\wamp\www\.DS_Store Command: CWD /var/www/html Response: 250 Directory successfully changed. Command: TYPE A Response: 200 Switching to ASCII mode. Command: PASV Response: 227 Entering Passive Mode (76,185,76,101,78,222). Command: STOR .DS_Store Response: 553 Could not create file. Error: Critical file transfer error Status: Retrieving directory listing... Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 227 Entering Passive Mode (76,185,76,101,23,94). Command: LIST Response: 150 Here comes the directory listing. Response: 226 Directory send OK. Status: Directory listing successful Response: 421 Timeout. Error: Connection closed by server Status: Disconnected from server IM running windows OS and using filezilla FTP client

  Read the article

• Preseed values for keyboard-configuration

  - by Nikolai

  I'd like to activate ctrl+alt+backspace on multiple pcs (Ubuntu 14.04) using dpkg-reconfigure keyboard-configuration I don't want to do the dialog every time so i tried: debconf-get-selections | grep "^keyboard-configuration" > config.dat on a host where i answered the dialog with the desired answers On the host where i want to do it non interactively i tried: debconf-set-selections config.dat dpkg-reconfigure -f noninteractive keyboard-configuration it ran without asking, but afterwards the selections where reset to the default values How can i get dpkg to use my predefined values? Or is there another possibility to enable the ctrl+alt+backspace for all users without going through dialogs?

  Read the article

• Opening a Gtk.Window that covers Launcher and Panel

  - by BigWhale

  I am trying to create a GtkWindow that would be on top of all the windows. This includes Unity's Launcher and Panel. I am working on Kazam screen recorder and one of the options of the program is recording an arbitrary area of the screen. For this, I open a GtkWindow and let user resize it and move it around the screen to the desired location. The problem is when user wants to resize the window over the Panel (or Launcher). It can't be done. It seems that window manager is preventing this. I can move the window under panel and launcher if I ALT-drag it, but the problem because area selection window stays below Launcher and Panel. Any ideas are more than welcome.

  Read the article

< Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >