Search Results

Search found 71242 results on 2850 pages for 'temp file guy'.

Page 507/2850 | < Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >

• How can I read a continuously updating log file in Perl?

  - by Octopus

  I have a application generating logs in every 5 sec. The logs are in below format. 11:13:49.250,interface,0,RX,0 11:13:49.250,interface,0,TX,0 11:13:49.250,interface,1,close,0 11:13:49.250,interface,4,error,593 11:13:49.250,interface,4,idle,2994215 and so on for other interfaces... I am working to convert these into below CSV format: Time,interface.RX,interface.TX,interface.close.... 11:13:49,0,0,0,.... Simple as of now but the problem is, I have to get the data in CSV format online, i.e as soon the log file updated the CSV should also be updated. What I have tried to read the output and make the header is: #!/usr/bin/perl -w use strict; use File::Tail; my $head=["Time"]; my $pos={}; my $last_pos=0; my $current_event=[]; my $events=[]; my $file = shift; $file = File::Tail->new($file); while(defined($_=$file->read)) { next if $_ =~ some filters; my ($time,$interface,$count,$eve,$value) = split /[,\n]/, $_; my $key = $interface.".".$eve; if (not defined $pos->{$eve_key}) { $last_pos+=1; $pos->{$eve_key}=$last_pos; push @$head,$eve; } print join(",", @$head) . "\n"; } Is there any way to do this using Perl?

  Read the article

• Why does my plist file exist even when I've uninstalled an app and wiped the simulator?

  - by just_another_coder

  I am trying to detect the existence of a plist file on application start. When my data class (descendant of NSObject) is initialized, it loads the plist file. Before it loads, it checks to see if the file exists, and if it doesn't, it sets the data = nil instead of trying to process the array of data in the plist file. However, every time it starts it indicates the file exists. Even when I uninstall the app in the organizer and when wiping the simulator directory (iPhone Simulator/3.0/Applications). I have the following static method in a library class named FileIO: +(BOOL) fileExists:(NSString *)fileName { NSString *path = [FileIO getPath:fileName]; // gets the path to the docs directory if ([[NSFileManager defaultManager] fileExistsAtPath:path]) return YES; else return NO; } In my data class: //if( [FileIO fileExists:kFavorites_Filename] ) [FileIO deleteFile:kFavorites_Filename]; if ([FileIO fileExists:kFavorites_Filename]) {NSLog(@"exists"); The "exists" is logged every time unless I un-comment the method to delete the file. How can the file exist if I've deleted the app? I've deleted the simulator directory and uninstalled on the device but both say it still exists. What gives???

  Read the article

• PHP: How to know if a user is currently downloading a file?

  - by metrobalderas

  I'm developing a quick rapidshare-like site where the user can download files. First, I created a quick test setting headers and using readfile() but then I found in the comments section there's a way to limit the speed of the download, which is great, here's the code: $local_file = 'file.zip'; $download_file = 'name.zip'; // set the download rate limit (=> 20,5 kb/s) $download_rate = 20.5; if(file_exists($local_file) && is_file($local_file)) { header('Cache-control: private'); header('Content-Type: application/octet-stream'); header('Content-Length: '.filesize($local_file)); header('Content-Disposition: filename='.$download_file); flush(); $file = fopen($local_file, "r"); while(!feof($file)) { // send the current file part to the browser print fread($file, round($download_rate * 1024)); // flush the content to the browser flush(); // sleep one second sleep(1); } fclose($file);} else { die('Error: The file '.$local_file.' does not exist!'); } But now my question is, how to limit the number of downloads at the same time? How can I check there's still a connection with some user's IP? Thanks.

  Read the article

• txt file read/overwrite/append. Is this feasible? (Visual C#)

  - by Arcadian

  Hi, I'm writing a program for some data entry I have to periodically do. I have begun testing a few things that the program will have to do but i'm not sure about this part. What i need this part to do is: read a .txt file of data take the first 12 characters from each line take the first 12 characters from each line of the data that has been entered in a multi-line text box compare the two lists line by line if one of the 12 character blocks from the multi-line text box match one of the blocks in the .txt file then overwrite that entire line (only 17 characters in total) if one of the 12 character blocks from the multi-line text box DO NOT match any of the blocks in the.txt file then append that entire line to the file thats all it has to do. i'll do an example: TXT FILE: G01:78:08:32 JG05 G08:80:93:10 JG02 G28:58:29:28 JG04 MULTI-LINE TEXT BOX: G01:78:08:32 JG06 G28:58:29:28 JG03 G32:10:18:14 JG01 G32:18:50:78 JG07 RESULTING TXT FILE: G01:78:08:32 JG06 G08:80:93:10 JG02 G28:58:29:28 JG03 G32:10:18:14 JG01 G32:18:50:78 JG07 as you can see lines 1 and 3 were overwriten, line 2 was left alone as it did not match any blocks in the text box, lines 4 and 5 were appended to the file. thats all i want it to do. How do i go about this? Thanks in advance

  Read the article

• Why is Adobe Flash Player downloaded as a ".dmg.mdlp" file?

  - by dpddt

  When I download the current Adobe flash player installer from the Adobe website using Safari 6.0.1 under OSX 10.8.2, I end up with a file named 'install_flash_player_osx.dmg.mdlp' in my downloads folder. I am curious as to why the .mdlp extension is being added to the disk image containing the flash player installer, which has always terminated with the .dmg extension in the past. The only program which uses the .mdlp extension that I am aware of is matlab; matlab is installed on this machine and it is the program the OS would like to use to open the file. I have not seen OSX, or any component thereof, replace or append file extensions in the past and I am able to download .dmg files from other websites without this phenomenon occurring. Note that I am not interested in suggestions regarding the opening of the file, but rather an explanation as to why the .mdlp extension is being applied in the first place, whether it be by the local machine or Adobe.

  Read the article

• Nginx http_mp4_module seam installed but dont work

  - by Tahola

  I try to use the http_mp4_module on my Ubuntu server but that didnt seem to work at all. When i check nginx -V i get : nginx version: nginx/1.1.19 TLS SNI support enabled configure arguments: --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --lock-path=/var/lock/nginx.lock --pid-path=/var/run/nginx.pid --with-debug --with-http_addition_module --with-http_dav_module --with-http_flv_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_mp4_module --with-http_perl_module --with-http_random_index_module --with-http_realip_module --with-http_secure_link_module --with-http_stub_status_module --with-http_ssl_module --with-http_sub_module --with-http_xslt_module --with-ipv6 --with-sha1=/usr/include/openssl --with-md5=/usr/include/openssl --with-mail --with-mail_ssl_module --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-auth-pam --add-module=/build/buildd/nginx-1.1.19/debian/modules/chunkin-nginx-module --add-module=/build/buildd/nginx-1.1.19/debian/modules/headers-more-nginx-module --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-development-kit --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-echo --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-http-push --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-lua --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-upload-module --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-upload-progress --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-upstream-fair --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-dav-ext-module --with-http_mp4_module and --with-http_flv_module are there, I also add on sites-available/domaine.conf location ~ .mp4$ { mp4; mp4_buffer_size 4M; mp4_max_buffer_size 10M; } location ~ .flv$ { flv; } and Nginx restarted witout error, everything seem ok but when i check my urls myvideo.mp4?start=60 return a 404 error (what i think is normal) and video.mp4?starttime=60 return the video but whatever the starttime number is i get the full video from the begining, did i miss something ?

  Read the article

• How to check CPU temperature on a HP P2000?

  - by Pavel

  I have a HP StorageWorks MSA Storage P2000 G3 SAS. show sensor-status gives something like # show sensor-status Sensor Name Value Status ---------------------------------------------------- On-Board Temperature 1-Ctlr A 53 C OK On-Board Temperature 1-Ctlr B 52 C OK On-Board Temperature 2-Ctlr A 61 C OK On-Board Temperature 2-Ctlr B 63 C OK On-Board Temperature 3-Ctlr A 53 C OK On-Board Temperature 3-Ctlr B 53 C OK Disk Controller Temp-Ctlr A 34 C OK Disk Controller Temp-Ctlr B 32 C OK Memory Controller Temp-Ctlr A 66 C OK Memory Controller Temp-Ctlr B 67 C OK [...] Overall Unit Status OK OK Temperature Loc: upper-IOM A 40 C OK Temperature Loc: lower-IOM B 38 C OK Temperature Loc: left-PSU 36 C OK Temperature Loc: right-PSU 40 C OK [...] is one of the values the CPU/FPGA temperature? Or, if not, how do I get it? Thanks!

  Read the article

• Nginx upload PUT and POST

  - by w00t

  I am trying to make nginx accept POST and PUT methods to upload files. I have compiled nginx_upload_module-2.2.0. I can't find any how to. I simply want to use only nginx for this, no reverse proxy, no other backend and no php. Is this achievable? this is my conf: nginx version: nginx/1.2.3TLS SNI support enabled configure arguments: --prefix=/etc/nginx --sbin-path=/usr/sbin/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --pid-path=/var/run/nginx.pid --lock-path=/var/run/nginx.lock --http-client-body-temp-path=/var/cache/nginx/client_temp --http-proxy-temp-path=/var/cache/nginx/proxy_temp --http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp --http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp --http-scgi-temp-path=/var/cache/nginx/scgi_temp --user=nginx --group=nginx --with-http_ssl_module --with-http_realip_module --with-http_addition_module --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_stub_status_module --with-mail --with-mail_ssl_module --with-file-aio --with-ipv6 --with-cc-opt='-O2 -g' --add-module=/usr/src/nginx-1.2.3/nginx_upload_module-2.2.0 server { listen 80; server_name example.com; location / { root /html; autoindex on; } location /upload { root /html; autoindex on; upload_store /html/upload 1; upload_set_form_field $upload_field_name.name "$upload_file_name"; upload_set_form_field $upload_field_name.content_type "$upload_content_type"; upload_set_form_field $upload_field_name.path "$upload_tmp_path"; upload_aggregate_form_field "$upload_field_name.md5" "$upload_file_md5"; upload_aggregate_form_field "$upload_field_name.size" "$upload_file_size"; upload_pass_form_field "^submit$|^description$"; upload_cleanup 400 404 499 500-505; } } And as an upload form I'm trying to use the one listed at the end of this page: http://grid.net.ru/nginx/upload.en.html

  Read the article

• Win7 Bluescreen: IRQ_NOT_LESS_OR_EQUAL | athrxusb.sys

  - by wretrOvian

  Hi I'd left my system on last night, and found the bluescreen in the morning. This has been happening occasionally, over the past few days. Details: ================================================== Dump File : 022710-18236-01.dmp Crash Time : 2/27/2010 8:46:44 AM Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL Bug Check Code : 0x000000d1 Parameter 1 : 00000000`00001001 Parameter 2 : 00000000`00000002 Parameter 3 : 00000000`00000000 Parameter 4 : fffff880`06b5c0e1 Caused By Driver : athrxusb.sys Caused By Address : athrxusb.sys+760e1 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\minidump\022710-18236-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== HiJackThis ("[...]" indicates removed text; full log posted to pastebin): Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 8:49:15 AM, on 2/27/2010 Platform: Unknown Windows (WinNT 6.01.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16385) Boot mode: Normal Running processes: C:\Windows\DAODx.exe C:\Program Files (x86)\ASUS\EPU\EPU.exe C:\Program Files\ASUS\TurboV\TurboV.exe C:\Program Files (x86)\PowerISO\PWRISOVM.EXE C:\Program Files (x86)\OpenOffice.org 3\program\soffice.exe C:\Program Files (x86)\OpenOffice.org 3\program\soffice.bin D:\Downloads\HijackThis.exe C:\Program Files (x86)\uTorrent\uTorrent.exe R1 - HKCU\Software\Microsoft\Internet Explorer\[...] [...] O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [HDAudDeck] C:\Program Files (x86)\VIA\VIAudioi\VDeck\VDeck.exe -r O4 - HKLM\..\Run: [StartCCC] "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\CLIStart.exe" MSRun O4 - HKLM\..\Run: [TurboV] "C:\Program Files\ASUS\TurboV\TurboV.exe" O4 - HKLM\..\Run: [PWRISOVM.EXE] C:\Program Files (x86)\PowerISO\PWRISOVM.EXE O4 - HKLM\..\Run: [googletalk] C:\Program Files (x86)\Google\Google Talk\googletalk.exe /autostart O4 - HKLM\..\Run: [AdobeCS4ServiceManager] "C:\Program Files (x86)\Common Files\Adobe\CS4ServiceManager\CS4ServiceManager.exe" -launchedbylogin O4 - HKCU\..\Run: [uTorrent] "C:\Program Files (x86)\uTorrent\uTorrent.exe" O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'NETWORK SERVICE') O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'NETWORK SERVICE') O4 - Startup: OpenOffice.org 3.1.lnk = C:\Program Files (x86)\OpenOffice.org 3\program\quickstart.exe O13 - Gopher Prefix: O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: AMD External Events Utility - Unknown owner - C:\Windows\system32\atiesrxx.exe (file missing) O23 - Service: ASUS System Control Service (AsSysCtrlService) - Unknown owner - C:\Program Files (x86)\ASUS\AsSysCtrlService\1.00.02\AsSysCtrlService.exe O23 - Service: DeviceVM Meta Data Export Service (DvmMDES) - DeviceVM - C:\ASUS.SYS\config\DVMExportService.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: ESET HTTP Server (EhttpSrv) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\EHttpSrv.exe O23 - Service: ESET Service (ekrn) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\x86\ekrn.exe O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: FLEXnet Licensing Service - Acresso Software Inc. - C:\Program Files (x86)\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService.exe O23 - Service: FLEXnet Licensing Service 64 - Acresso Software Inc. - C:\Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService64.exe O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files (x86)\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe O23 - Service: @keyiso.dll,-100 (KeyIso) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @comres.dll,-2797 (MSDTC) - Unknown owner - C:\Windows\System32\msdtc.exe (file missing) O23 - Service: @%SystemRoot%\System32\netlogon.dll,-102 (Netlogon) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\psbase.dll,-300 (ProtectedStorage) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: Protexis Licensing V2 (PSI_SVC_2) - Protexis Inc. - c:\Program Files (x86)\Common Files\Protexis\License Service\PsiService_2.exe O23 - Service: @%systemroot%\system32\Locator.exe,-2 (RpcLocator) - Unknown owner - C:\Windows\system32\locator.exe (file missing) O23 - Service: @%SystemRoot%\system32\samsrv.dll,-1 (SamSs) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\snmptrap.exe,-3 (SNMPTRAP) - Unknown owner - C:\Windows\System32\snmptrap.exe (file missing) O23 - Service: @%systemroot%\system32\spoolsv.exe,-1 (Spooler) - Unknown owner - C:\Windows\System32\spoolsv.exe (file missing) O23 - Service: @%SystemRoot%\system32\sppsvc.exe,-101 (sppsvc) - Unknown owner - C:\Windows\system32\sppsvc.exe (file missing) O23 - Service: Steam Client Service - Valve Corporation - C:\Program Files (x86)\Common Files\Steam\SteamService.exe O23 - Service: @%SystemRoot%\system32\ui0detect.exe,-101 (UI0Detect) - Unknown owner - C:\Windows\system32\UI0Detect.exe (file missing) O23 - Service: @%SystemRoot%\system32\vaultsvc.dll,-1003 (VaultSvc) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\vds.exe,-100 (vds) - Unknown owner - C:\Windows\System32\vds.exe (file missing) O23 - Service: @%systemroot%\system32\vssvc.exe,-102 (VSS) - Unknown owner - C:\Windows\system32\vssvc.exe (file missing) O23 - Service: @%systemroot%\system32\wbengine.exe,-104 (wbengine) - Unknown owner - C:\Windows\system32\wbengine.exe (file missing) O23 - Service: @%Systemroot%\system32\wbem\wmiapsrv.exe,-110 (wmiApSrv) - Unknown owner - C:\Windows\system32\wbem\WmiApSrv.exe (file missing) O23 - Service: @%PROGRAMFILES%\Windows Media Player\wmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown owner - C:\Program Files (x86)\Windows Media Player\wmpnetwk.exe (file missing) -- End of file - 6800 bytes CPU-Z ("[...]" indicates removed text; see full log posted to pastebin): CPU-Z TXT Report ------------------------------------------------------------------------- Binaries ------------------------------------------------------------------------- CPU-Z version 1.53.1 Processors ------------------------------------------------------------------------- Number of processors 1 Number of threads 2 APICs ------------------------------------------------------------------------- Processor 0 -- Core 0 -- Thread 0 0 -- Core 1 -- Thread 0 1 Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 2 (max 2) Number of threads 2 (max 2) Name AMD Phenom II X2 550 Codename Callisto Specification AMD Phenom(tm) II X2 550 Processor Package Socket AM3 (938) CPUID F.4.2 Extended CPUID 10.4 Brand ID 29 Core Stepping RB-C2 Technology 45 nm Core Speed 3110.7 MHz Multiplier x FSB 15.5 x 200.7 MHz HT Link speed 2006.9 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size L3 cache 6 MBytes, 48-way set associative, 64-byte line size FID/VID Control yes Min FID 4.0x P-State FID 0xF - VID 0x10 P-State FID 0x8 - VID 0x18 P-State FID 0x3 - VID 0x20 P-State FID 0x100 - VID 0x2C Package Type 0x1 Model 50 String 1 0x7 String 2 0x6 Page 0x0 TDP Limit 79 Watts TDC Limit 66 Amps Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Attached device PCI device at bus 0, device 24, function 4 Thread dumps ------------------------------------------------------------------------- CPU Thread 0 APIC ID 0 Topology Processor ID 0, Core ID 0, Thread ID 0 Type 0200400Ah Max CPUID level 00000005h Max CPUID ext. level 8000001Bh Cache descriptor Level 1, I, 64 KB, 1 thread(s) Cache descriptor Level 1, D, 64 KB, 1 thread(s) Cache descriptor Level 2, U, 512 KB, 1 thread(s) Cache descriptor Level 3, U, 6 MB, 2 thread(s) CPUID 0x00000000 0x00000005 0x68747541 0x444D4163 0x69746E65 0x00000001 0x00100F42 0x00020800 0x00802009 0x178BFBFF 0x00000002 0x00000000 0x00000000 0x00000000 0x00000000 0x00000003 0x00000000 0x00000000 0x00000000 0x00000000 0x00000004 0x00000000 0x00000000 0x00000000 0x00000000 0x00000005 0x00000040 0x00000040 0x00000003 0x00000000 [...] CPU Thread 1 APIC ID 1 Topology Processor ID 0, Core ID 1, Thread ID 0 Type 0200400Ah Max CPUID level 00000005h Max CPUID ext. level 8000001Bh Cache descriptor Level 1, I, 64 KB, 1 thread(s) Cache descriptor Level 1, D, 64 KB, 1 thread(s) Cache descriptor Level 2, U, 512 KB, 1 thread(s) Cache descriptor Level 3, U, 6 MB, 2 thread(s) CPUID 0x00000000 0x00000005 0x68747541 0x444D4163 0x69746E65 0x00000001 0x00100F42 0x01020800 0x00802009 0x178BFBFF 0x00000002 0x00000000 0x00000000 0x00000000 0x00000000 0x00000003 0x00000000 0x00000000 0x00000000 0x00000000 0x00000004 0x00000000 0x00000000 0x00000000 0x00000000 0x00000005 0x00000040 0x00000040 0x00000003 0x00000000 [...] Chipset ------------------------------------------------------------------------- Northbridge AMD 790GX rev. 00 Southbridge ATI SB750 rev. 00 Memory Type DDR3 Memory Size 4096 MBytes Channels Dual, (Unganged) Memory Frequency 669.0 MHz (3:10) CAS# latency (CL) 9.0 RAS# to CAS# delay (tRCD) 9 RAS# Precharge (tRP) 9 Cycle Time (tRAS) 24 Bank Cycle Time (tRC) 33 Command Rate (CR) 1T Uncore Frequency 2006.9 MHz Memory SPD ------------------------------------------------------------------------- DIMM # 1 SMBus address 0x50 Memory type DDR3 Module format UDIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 2048 MBytes Max bandwidth PC3-10700 (667 MHz) Part number F3-10600CL9-2GBNT Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-17-23 @ 457 MHz JEDEC #2 7.0-7-7-20-27 @ 533 MHz JEDEC #3 8.0-8-8-22-31 @ 609 MHz JEDEC #4 9.0-9-9-25-34 @ 685 MHz DIMM # 2 SMBus address 0x51 Memory type DDR3 Module format UDIMM Manufacturer (ID) G.Skill (7F7F7F7FCD000000) Size 2048 MBytes Max bandwidth PC3-10700 (667 MHz) Part number F3-10600CL9-2GBNT Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-17-23 @ 457 MHz JEDEC #2 7.0-7-7-20-27 @ 533 MHz JEDEC #3 8.0-8-8-22-31 @ 609 MHz JEDEC #4 9.0-9-9-25-34 @ 685 MHz DIMM # 1 SPD registers [...] DIMM # 2 SPD registers [...] Monitoring ------------------------------------------------------------------------- Mainboard Model M4A78T-E (0x000001F7 - 0x00A955E4) LPCIO ------------------------------------------------------------------------- LPCIO Vendor ITE LPCIO Model IT8720 LPCIO Vendor ID 0x90 LPCIO Chip ID 0x8720 LPCIO Revision ID 0x2 Config Mode I/O address 0x2E Config Mode LDN 0x4 Config Mode registers [...] Register space LPC, base address = 0x0290 Hardware Monitors ------------------------------------------------------------------------- Hardware monitor ITE IT87 Voltage 1 1.62 Volts [0x65] (VIN1) Voltage 2 1.15 Volts [0x48] (CPU VCORE) Voltage 3 5.03 Volts [0xBB] (+5V) Voltage 8 3.34 Volts [0xD1] (VBAT) Temperature 0 39°C (102°F) [0x27] (TMPIN0) Temperature 1 43°C (109°F) [0x2B] (TMPIN1) Fan 0 3096 RPM [0xDA] (FANIN0) Register space LPC, base address = 0x0290 [...] Hardware monitor AMD SB6xx/7xx Voltage 0 1.37 Volts [0x1D2] (CPU VCore) Voltage 1 3.50 Volts [0x27B] (CPU IO) Voltage 2 12.68 Volts [0x282] (+12V) Hardware monitor AMD Phenom II X2 550 Power 0 89.10 W (Processor) Temperature 0 35°C (94°F) [0x115] (Core #0) Temperature 1 35°C (94°F) [0x115] (Core #1)

  Read the article

• Roaming user profile issues on Server 2008

  - by Alicia White

  I thought I cleared a user's profile from 2008, but it keeps coming back. So, I was looking for the best way to clear a roaming profile in Server 2008, but I have been unable to find anything. But, I did see the post here: http://serverfault.com/questions/18724/user-profile-keeps-loading-temp-profile I wanted to add a comment to that post, but it was closed as not being related to sysadmin. But, I think it IS related because I dealt with precisely this same problem on our Wndows 2008 terminal server. Here was the issue: we have a user who was getting an "unable to load your roaming profile" type of error at logon in Windows 2008. Looking at the server, we could see her temp profile listed in the profile list while she was loggged (listed as a "temporary" and not a "roaming" profile). While she was logged on, a folder called C:\Users\Temp.DOMAIN existed in the users folder, but that disappeared as soon as she logged out. When this thing happened in 2003, we would clear the contents of the roaming profile folder & delete the temp folder in C:\Documents and Settings. The thing is, 2008 behaves a bit differently. Server 2008 created a new roaming profile folder in the roaming profile folder share: \SERVER\ProfileShare\UserName.V2 The local profile disappears from the profile list in System Properties, so there is no profile to clear Also the local profile folder, C:\Users\Temp.DOMAIN doesn't stay on the server when the user logs out, so we can't delete that as we would normally do when this sort of thing happens in Windows 2003 Despite all of this, every time the user logs back on, the frickin' Temp profile always comes back. One of my team-mates, who is much more experienced with 2008, said I should check the registry for the user's profile in this key (the users are listed by SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList I saw the user's SID listed there, but it ended in .BAK. I checked several other servers where she is having the same profile errors: in all cases, her SID ended with .BAK. For example (xxx replacing the LONG SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak On the server she was logged on to, there were two keys for her profile in the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak So, here is how I cleared up the issue. I had the user log off. I deleted the apparently bad profiles ending in .BAK from the ProfileList key on each server where it appeared. I made sure her roaming profile folder was empty I made sure that all the TEMP profile folders were gone The user logged back on: no more profile errors! Anyway, I wanted to make a comment on that closed question, but I didn't see any way to re-open the question so I could add it. But, I also would like to know if this is the best practice to clear out a bad roaming profile for Server 2008? I'm having a hard time finding any instructions on line on how best to do this, but this method I used seemed to work. I'd like to find some documentation to give to our Level 1 support staff so they will know how to clear user profiles on 2008 since this seems to be more involved that clearing user profiles in server 2003. Thanks, Alicia

  Read the article

• LSI MegaRAID Expected Chip Temperature?

  - by Myles Gray

  We recently built a replicating SAN array from 2x Dell R720XD's, we are using LSI 9270-8i MegaRAID cards with CacheCade 2.0, BBU and Write Back cache enabled. Our cards are showing HUGE chip temperatures (97*C+ with NO disk activity!). Our R720's are in auto temp management mode so the max exhaust temp is 50*C. The MegaRAID cards are passively cooled and depend on good airflow to cool them - however is 97*C normal? - I have seen reference to 60*C max ambients but nothing for chip temp.

  Read the article

• Windows cannot access the specified device, path, or file.

  - by Pia

  I have recently installed Windows XP Pro SP2. Whenevr I try to run any .exe file I get the following error: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I read some where that if we right click on the file and in Properties-Security click the unblock option, this problem is solved but this is not working for me as I dont get Security tab in Properties.Please help!! Due to this I am not able to install any software in my computer

  Read the article

• Does SOLARIS have similar file to Linux's /etc/security/limits.conf?

  - by SQL Warrior

  I'm doing compliance check on SOLARIS 10 OS. I need to verify the following parameter settings: core file size (blocks, -c) unlimited data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited open files (-n) 65536 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited virtual memory (kbytes, -v) unlimited Sure I could use ulimit -cH to get display above. But I also need to find where those settings are. I'm from Linux, in Linux we have /etc/security/limts.conf file to hold alike information. Do we have such file in Solaris? TIA!

  Read the article

• PHP ignores upload_tmp_dir?

  - by Matthias Vance

  LS, I am using IIS7 with PHP (FastCGI). I set up the upload_tmp_dir to "X:\Temp" instead of leaving it empty, but it's still using "C:\Windows\Temp" for some reason. I did give the following users full rights : NETWORK SERVICE, (application pool user), IIS_IUSRS. I also restarted IIS after I made the change. I tried to create a directory inside the correct temp path using PHP, and that did work, so it's not a security issue. Kind regards, Matthias Vance

  Read the article

• How to recover a file using the FAT cluster chain instead of using the stored length in the FAT table?

  - by cadrian

  I'm trying to recover movie files from my TNT receiver hard drive but it corrupts its FAT32 allocation table (crappy cheap device...) Using dosfsck is useless because the correct file length is the cluster length, not the (shorter) one in the table, and dosfsck only proposes to shorten the file, which I won't do. Question: how to recover a file using the FAT cluster chain instead of using the stored length in the FAT table? Edit I forgot to say: Linux solutions only please (I have no windows box)

  Read the article

• Copy File Contiguously to Disk from OSX/Unix/Linux to FAT32 FS?

  - by alharaka

  So the Sysinternals guys have that cool contig.exe utility that allows me ensure a file is contiguous. I need to copy overs ISO files to a FAT32 USB flash key. Grub4DOS requires the files be continuous, but I do not have Windows access at the moment. Is there a way to copy a file so it is contiguous on the target drive, or a tool like the aforementioned that will make an existing file contiguous. Again, I need it on FAT32, and there lies the rub.

  Read the article

• Cisco "copy startup-config tftp" results in a 0 byte file on the server?

  - by Geoffrey

  I'm pulling my hair out figuring this out. My startup-config is good, I can view it with a show command. I'm trying to copy it to a tftp server: asa5505# copy startup-config tftp Address or name of remote host []? ipaddress Destination filename [startup-config]? t !! %Error writing tftp://ipaddress/t (Timed out attempting to connect) On my TFTP server (SolarWinds), I get the following: binary, PUT. Started file name: C:\TFTP-Root\t binary, PUT. File Exists, C:\TFTP-Root\t binary, PUT. Deleting Existing File. binary, PUT. Interrupted by client, cause: The process cannot access the file 'C:\TFTP-Root\t' because it is being used by another process I've used tftpd32 with same results. I've tried different servers, even one on the same network as the asa ... same results. It'll create a 0 byte file and never do the dump. What's going on? Everything is working normally except for this.

  Read the article

• Is it possible to set these IIS7 settings in a web.config file?

  - by Pure.Krome

  Hi folks, with my IIS7 site, i manually set the bindings for my site. Here's an example screenshot. Is it possible to set these bindings in the (local) web.config file? Not a machine or app config file ... but the web.config file? Cheers :)

  Read the article

• Why do Finder and du report different file size?

  - by flipdoubt

  I am writing a geektool 3 script to show the size of a particular VMware Fusion virtual machine. Get Info in Finder says the file is "52.91 GB". I run the following du command to get the file size: > du -hs ~/Documents/Virtual\ Machines.localized/MY-PRECIOUS-7.vmwarevm | awk '{print $1}' This du -hs command returns the file size as "49G". What accounts for the difference from what Finder reports? Alternatively, I have tried replacing the -s option with the -d option like so: du -hd ~/Documents/Virtual\ Machines.localized/MY-PRECIOUS-7.vmwarevm | awk '{print $1}' This du -hd command returns the file size as "59G". What accounts for the difference between Finder, du -hd, and du -hs? Also, this du -hd command produces no output in geektool 3. What gives?

  Read the article

• How do I use saz-sudo puppet module to deploy my own sudoers file with hiera?

  - by mr.zog

  I have saz-sudo installed and have created a site_sudo module based (I hope) on it. Here's what I have in my site_sudo/manifest/init.pp file: class { 'site_sudo': } sudo::conf { 'web': source => 'puppet:///files/etc/sudoers', } sudo::conf { 'syseng': priority => 10, content => "%sysadm ALL=(ALL) NOPASSWD: ALL", } include sudo No matter what I do, the sudoers file on the target is always overwritten with the sudoers.rhel6 file from saz-sudo module. I'm using common.yaml too: classes: - site_sudo

  Read the article

• Apache has a 2GB file limit on a CIFS network drive?

  - by netvope

  Setup: A Windows and a Ubuntu Server are hosted in VMware ESXi I have a a 6GB file on a Windows share The Windows share is mount on Ubuntu with smbmount A symlink pointing to the 6GB file is created in a public_html directory, which is readable by Apache The problem: wget gets an error Connection closed at byte 2130706432. Retrying. after downloading 2130706432 bytes (exactly 2032 MiB, and is the same every time) Apache returns 206 Partial Content without showing any errors in the log Same error even if I download from localhost Similar error when Firefox is used instead of wget No error if I md5sum or cp the file on Ubuntu, suggesting that smbmount and the Windows Server are OK with 6GB files. No error if Apache serve a 6GB file from the local disk, suggesting that Apache has no problems handling 6GB files. Any ideas why Apache/symlink/smbmount/Windows would cause an error when used together? How can I fix the problem? Software used: VMware ESXi 4 Update 1 Windows Server 2008 R2 Ubuntu 8.04 Server, vmxnet3 Apache 2.2.8 mount.cifs 1.10-3.0.28a

  Read the article

• where on disk is space allocated for new files inside LVM lv with ext4 file system?

  - by Jost

  I run a multi-disk server with LVM2. Several large disks serve as LVM2 physical volumes for one volume group, containing one logical volume formatted with ext4. Nothing fancy, just your standard linear setup. Recently an additional, very small disk was added as physical volume to that volume group and I expanded both the logical volume, and the ext4 file system therein onto that disk. This lv is used to store incremental backups using rsync and is only about 30% full, there have rarely been any files deleted from it, only incremental writes. Now this new HDD I added to the pre-existing volume group has unexpectedly died on me, and the volume group won't come up because it is missing one physical volume. As fate will have it, this WAS the "in an event of catastrophic failure on the primary server"-backup, the event happened, the boss is not happy, so this kinda has to work... According to this (Part 3): http://www.novell.com/coolsolutions/appnote/19386.html it is possible to trick LVM into starting anyway by creating a new pv with identical metadata to the failed disk, which will make the volume accessible, but of course leave giant holes in the file system. I have'n tried it yet, because it involves repairing (writing to) the file system which eliminates the possibility of trying other things if it fails. Now my question is: How does this setup actually allocate disk space for new data? Is it allocated linearly from beginning to end of PVs, in the order they were added to the vg? Is it striped somehow in order to increase performance/balance load? since this defective disk was added only later to an existing lvm2 vg and lv, containing a half-empty ext4, what are the chances that there was never any data written to the defective disk? In other words: what are the chances of recovering all my data, even without the defective disk, by just starting the volume group as-is? Am I about to go spend $1500 on having 250GB of empty space recovered when I send the defective disk in for repair? Is there a way to check without mounting the file system and opening the files, hoping they contain something other than zeros? (comparing addresses of used data blocks inside ext4 to address ranges that were on the missing pv, something like that, preferably easy to automate) I know bitwise-copying the entire lv into an image file before trying to repair the ext4 would probably be a good idea, but since this lv is very large and I just suffered major file system failure on several systems it is probably a luxury I don't have... Any suggestions?

  Read the article

• How do you install .net4 on a Server 2008 r2 machine through psremoting in powershell?

  - by Jake

  I need to write a script that installs .net 4 remotely using powershell to a group of Server 2008 R2 machines. I based my script off of http://social.technet.microsoft.com/Forums/en-US/winserverpowershell/thread/3045eb24-7739-4695-ae94-5aa7052119fd/. enter-pssession -computername localhost $arglist = "/q /norestart /log C:\Users\tempuser\Desktop\dotnetfx4" $filepath = "C:\Users\tempuser\Desktop\dotNetFx40_Full_setup.exe" Start-Process -FilePath $filepath -ArgumentList $arglist -Wait -PassThru After running the command I would get the following log errors (running the same lines locally would install .net without error): Action: Downloading Item Failed to CreateJob : hr= 0x80200014 Action: Performing actions on all Items Action: Performing Action on Exe at C:\Users\tempuser\Desktop\dotnetfx4\SetupUtility.exe Exe (C:\Users\tempuser\Desktop\dotnetfx4\SetupUtility.exe) succeeded. Exe Log File: dd_SetupUtility.txt Action complete Action: ServiceControl - Stop clr_optimization_v2.0.50727_32 ServiceControl operation succeeded! Action complete Action: ServiceControl - Stop clr_optimization_v2.0.50727_64 ServiceControl operation succeeded! Action complete Action: Performing Action on Exe at C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\Windows6.1-KB958488-v6001-x64.msu Exe (C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\Windows6.1-KB958488-v6001-x64.msu) failed with 0x5 - Access is denied. . PerformOperation on exe returned exit code 5 (translates to HRESULT = 0x5) Action complete OnFailureBehavior for this item is to Rollback. Action: Performing actions on all Items Action complete Action complete Action: Downloading http://go.microsoft.com/fwlink/?LinkId=164184&clcid=0x409 using WinHttp WinHttpDetectAutoProxyConfigUrl failed with error: 12180 Unable to retrieve Proxy information although WinHttpGetIEProxyConfigForCurrentUser called succeeded Action complete C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\TMPF279.tmp.exe: Verifying signature for netfx_Core.mzz C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\TMPF279.tmp.exe Signature verified successfully for netfx_Core.mzz Action complete Decompression completed with code: 16389 Decompression of payload failed: C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\netfx_Core.mzz Action complete Final Result: Installation failed with error code: (0x80074005) (Elapsed time: 0 00:00:28). Is there some security setting or perhaps something else I've missed?

  Read the article

• Is there any way to make Mac OS X Spotlight only index the file names and not the contents?

  - by aalaap

  I do understand that the point of Spotlight is to look inside files, but it also returns file name matches, and that's what I need most of the time. Besides, Spotlight is running so absurdly slow on my system (Snow Leopard on the iMac '08), it's just unusable. I downloaded Canary and Spotlight wasn't able to find the app file for 15 minutes. It was already in the download stack, but as far as Spotlight goes, the file doesn't exist. Hence, I would like to know of a way to make Spotlight only index the file names, which would perhaps make it a bit faster. I'm looking at mimicking the behaviour of Windows applications such as AvaFind or Search Everything Edit: Let me highlight the fact that I am looking for an AvaFind or Search Everything replacement for Mac OS X. Go try one of these on a Windows machine and you'll understand my disappointment with Spotlight or any other popular search tools in OS X.

  Read the article

• Crypto-Analysis of keylogger logs and config file. Possible?

  - by lost.

  Is there anyway Encryption on an unidentified file can be broken(file in question: config file and log files from ardamax keylogger). These files date back all the way to 2008. I searched everywhere, nothing on slashdot, nothing on google. Ardamax Keyviewer? Should I just write to Ardamax? I am at a loss of what to do. I feel comprimised. Anyone managed to decrpyt files with Crypto-analysis? More Information-- There are log files in the folder and a configuration file, "akv.cfg". Is it possible to decrypt the files and maybe getting the attackers email address used to receive the keylogger logs? I've Checked ardamax.com. They have an built-in log viewer. But its unavailable for download. If superuser isn't the proper place to ask, know where I might get help?

  Read the article

< Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >