Search Results

Search found 17924 results on 717 pages for 'order'.

Page 510/717 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

• Issues with creating USB bootable Mountain Lion

  - by Sidd

  I am trying to set up a triple boot Windows 8, Mountain Lion, and Ubuntu. I am stuck though. I have got Windows 8 on a partition, and I am trying to get Mountain Lion on there at this point. I installed a VMware with a Snow Leopard 10.6.2 image on the Windows 8 platform. I used the disk utility in this program in order to get Mountain Lion on there. This is what i did specifically: I got the installesd.dmg. I 'mounted' that file or whatever you call it, and out came something along the lines of "Install Mountain Lion OS x" (something like that - it was like a submenu under the installesd.dmg in the disk utility). I got my PNY 8 gb Attache Flash Drive and went to the Erase tab of disk utility. I erased it using the Mac OS Extended (Journaled) setting and called it "Mac". I went to the Restore tab, dragged "Mac" into destination, and dragged "Install Mountain Lion OS x" to the source. Everything seemed to go well, but it didn't. When trying to boot from the flash drive (and yes, I set the BIOS correctly), it skipped it, and loaded Windows 8 normally as if nothing was plugged in. When I try looking at the flash drive in windows 8, it comes up as a 200 mb capacity drive labeled "EFI" with nothing in it (remember, it was 8gb in the beginning). I downloaded Plop Boot Manager, but it did not recognize a USB being plugged in. Does anyone know how I could fix this?

  Read the article

• Apache2 Modpython : IOError: Write failed, client closed connection.

  - by llazzaro

  This is the error : [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] mod_python (pid=9528, interpreter='realpage.com', phase='PythonHandler', handler='django.core.handlers.modpython'): Application error [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] ServerName: 'realpage.dom' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] DocumentRoot: '/htdocs' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] URI: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Location: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XX.248.60] Directory: None [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Filename: '/htdocs' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] PathInfo: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Traceback (most recent call last): [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1537, in HandlerDispatch\n default=default_handler, arg=req, silent=hlist.silent) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1229, in _process_target\n result = _execute_target(config, req, object, arg) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1128, in _execute_target\n result = object(arg) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/django/core/handlers/modpython.py", line 228, in handler\n return ModPythonHandler()(req) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/django/core/handlers/modpython.py", line 220, in call\n req.write(chunk) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XX.248.60] IOError: Write failed, client closed connection. Please! I am sure you need more information in order to find the bug, please tell me what and how to get it. The error is throwing every time!

  Read the article

• Time drift in Cloud Server - need to mainpulate GRUB config

  - by Aditya Advani

  We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

  Read the article

• Virtualbox Headless Server on Ubuntu missing VRDP Options

  - by The Daemons Advocate

  I'm running VirtualBox headless server on an Ubuntu 64 bit host, and I want to use it remotely. However, I'm having problems connecting via RDP. The DNS names in my network show the host to be 'server', and the guest to be 'ubuntu-vm'. From the official documentation, I gather that I am to connect to server on the default RDP port in order to see the guest machine. I start the virtual machine like so: vboxheadless -startvm My_VM Then I connect on my laptop, and I get... rdesktop -a 16 server ERROR: server: unable to connect So next I consult the documentation further, and I find there are RDP flags that can be turned on (but should be on implicitly for a headless server). So I pull up information using 'vboxmanage showvminfo My_VM', and I find the VRDP property is off. VRDP Connection: not active To make things even weirder, RDP flag seems to be missing from vboxmanage. I've installed straight from the ubuntu repo's using the virutalbox-ose package, not sure how that measures up against the official docs. For instance, this command doesn't exist: VBoxManage modifyvm My_VM --vrdp on From the UI, the VM's Settings regarding Display have greyed out the 'remote Display' option. What I'm looking for is advice :). I'm open to suggestions that don't involve starting again with something like VMWare. Thanks in advance!

  Read the article

• Can’t connect to SQL Server 2008 - looks like Shared Memory problem

  - by user38556

  I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• Issues resolving DNS entries for multi-homed servers

  - by I.T. Support

  This is difficult to explain, so bear with me. We have 2 domain controllers, each multi-homed to straddle 2 internal subnets, (subnet A and subnet B) and provide dns, dhcp, and ldap authentication. Both domain controllers each have 2 DNS entries. both entries have identical host names, but correspond to subnet A & subnet B respectively (example entries shown): dc1 host 192.168.8.1 dc1 host 192.168.9.1 dc2 host 192.168.8.2 dc2 host 192.168.9.2 We also have a 3rd subnet for our dmz, (subnet C) which neither domain controller has an IP address on, but our firewall/routing tables provide access to subnet A from subnet C and vice versa, but don't allow access to subnet B from subnet C. Here's my issue. How can I force/determine which dns entry is used when a server on subnet C queries either domain controller by host name? Right now it seems to randomly pick one of the two entries, swaps out the name for the IP address and that's that. The problem is if it randomly selects the entry that corresponds to the 9.x subnet B (no access from subnet C), then the server fails to resolve. If it picks the entry for the 8.x subnet A then it resolves (firewall/routing tables defined for communication between these 2 subnets) Here's what I'd like to know: What are Best Practices (if any) for dealing with DNS resolution on subnets that the DNS servers don't have a presence on? Can I control something akin to a metric value to force an order of DNS resolution when there are multiple entries for the same host name that correspond to different IP subnets? Should I even have 2 DNS HOST entries for the same name? Here's what I'd like to avoid: Making edits to the HOSTS files of servers on subnet C to force DNS resolution of the hostname to the appropriate subnet Adding NIC's to the DC's to have them straddle the DMZ as well, thus obtaining a third DNS entry that corresponds to subnet C Again, my apologies if this was too verbose / unclear. Thanks!

  Read the article

• Starfield Wildcard SSL Certificate Not Trusted in All Browsers

  - by Austen Cameron

  I am at a loss as to what else I might try in order to debug this issue with a Starfield Wildcard SSL Certificate. The problem is that in certain browsers (Safari or the most-updated chrome you can get for OS X 10.5.8 for example) the certificate comes up as untrusted, even on the root domain. My server setup / background info: General LAMP setup - CentOS 6.3 - on a Godaddy VPS Starfield Technologies Wildcard SSL certificate Installed using the instructions from godaddy's support pages ssl.conf lines are basically as follows: SSLCertificateFile /path/to/cert/mysite.com.cert SSLCertificateKeyFile /path/to/cert/mysite.key SSLCertificateChainFile /path/to/cert/sf_bundle.crt Everything seemingly worked fine until the other night when I noticed the problem in OS X, I assume it's more browser version related, but have only been able to replicate it on that particular machine. What I have tried: Updating sf_bundle.crt from godaddy's cert repository and Starfield's repository versions Following This ServerFault answer from Jim Phares - changing the ChainFile line to sf_intermediate.crt from Starfield's repository Using http://www.sslshopper.com/ssl-checker.html on my url It says the domain is correctly listed on the certificate but comes up with an error that reads The certificate is not trusted in all web browsers. You may need to install an Intermediate/chain certificate to link it to a trusted root certificate. What might I try next to remedy the untrusted certificate issue? Let me know if there is any other information needed that might help debugging this issue. Thanks in advance!

  Read the article

• Apache reverse proxy: no protocol handler

  - by gonvaled

  I am trying to configure a reverse proxy with apache, but I am getting a No protocol handler was valid for the URL error, which I do not understand. This is the relevant configuration of apache: ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /gonvaled/examples/jsonrpc/output/services/ http://localhost:8000/services/ ProxyPassReverse /gonvaled/examples/jsonrpc/output/services/ http://localhost:8000/services/ The requests is reaching apache as: POST /gonvaled/examples/jsonrpc/output/services/EchoService.py HTTP/1.1 And they should be forwarded to my internal service, located at: 0.0.0.0:8000/services/EchoService.py These are the logs: ==> /var/log/apache2/error.log <== [Wed Jun 20 02:05:20 2012] [debug] proxy_util.c(1506): [client 127.0.0.1] proxy: http: found worker http://localhost:8000/services/ for http://localhost:8000/services/EchoService.py, referer: http://localhost/gonvaled/examples/jsonrpc/output/JSONRPCExample.safari.cache.html [Wed Jun 20 02:05:20 2012] [debug] mod_proxy.c(998): Running scheme http handler (attempt 0) [Wed Jun 20 02:05:20 2012] [warn] proxy: No protocol handler was valid for the URL /gonvaled/examples/jsonrpc/output/services/EchoService.py. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. [Wed Jun 20 02:05:20 2012] [debug] mod_deflate.c(615): [client 127.0.0.1] Zlib: Compressed 614 to 373 : URL /gonvaled/examples/jsonrpc/output/services/EchoService.py, referer: http://localhost/gonvaled/examples/jsonrpc/output/JSONRPCExample.safari.cache.html ==> /var/log/apache2/access.log <== 127.0.0.1 - - [20/Jun/2012:02:05:20 +0200] "POST /gonvaled/examples/jsonrpc/output/services/EchoService.py HTTP/1.1" 500 598 "http://localhost/gonvaled/examples/jsonrpc/output/JSONRPCExample.safari.cache.html" "Mozilla/5.0 (X11; Linux i686) AppleWebKit/535.19 (KHTML, like Gecko) Chrome/18.0.1025.162 Safari/535.19"

  Read the article

• Two domains, two servers, one dynamic IP address

  - by giantman

  I have two domains hi.org and bye.net and one dynamic IP address and two servers. I want to attach one domain bye.net to server1 and hi.org to server2. I'm using Apache wamp 2.0i. I have two servers behind one router with a dynamic IP address #httpd.conf file additions <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> </IfModule> #vhost file additions NameVirtualHost *:80 #default <VirtualHost *:80> DocumentRoot "c:/wamp/www/fallback" </VirtualHost> # Server 1 <VirtualHost *:80> DocumentRoot "c:/wamp/www" ServerName h**p://bye.net ServerAlias bye.net </VirtualHost> # Server 2 <VirtualHost *:80> ProxyPreserveHost On ProxyPass / h**p://192.168.1.119/ DocumentRoot "g:/wamp/www" ServerName h**p://hi.org ServerAlias hi.org </VirtualHost> After doing all this I fallback to server1 only I don't get the page hi.org I only get the page bye.net, I don't even get the default fallback page which gets executed when a person enters IP address but not the domain name. I use Windows 7 (server 2) and Windows XP (server 1) UPDATE: I needed to remove DocumentRoot "g:/wamp/www" line :D it was there by mistake! things are working fine now. But one thing: the URL gets replaced by the local ip address any way to not make that happen?

  Read the article

• Distributing a custom command line tool to enterprise servers

  - by Jeremy Baker

  I've been tasked with building a command line tool that we will be providing to our enterprise customers so that they can use the API to upload data to our platform. The API works with standard cURL requests, so I can do most of the basic functionality with simple bash scripting, although I would like to provide something that is solid and really makes it easy for them to use and I don't know what I don't know. It's been a good 8 years since I've really done any serious sysadmin work. Most of the good tools I use these days are written in Ruby or Python and have a standard distribution process (Gems, for example). However, I know rhel and other platforms have their own package managers. Finally, the question: In today's day and age, what language / distribution method should I consider in order to cover the widest range of platforms without having to build completely different versions for each platform? I'd also love any general feedback you have about building similar projects, or links to projects that you think do a good job of this now and have open source code that I could read. Thanks in advance!

  Read the article

• ESXi 4.0 Guests Locking up

  - by Brendan Sherwin

  I installed ESXi 4.0 on an HP Proliant g5 with a 64bit Xeon processor and took advantage of the free license as I work for a public school. I created two instances of server 2003 from scratch, one to be the DC, DHCP, the other to be a file server and DNS/DHCP backup. I had both guests up and running fine, setup my user accounts, transferred the data, etc etc. Once I joined a client machine to the domain, I would find that both of my Windows guests would lock up. Sometimes it would be for five or so minutes, once it was overnight. The "locked up" state means that as far I could tell, all services were stopped; dhcp no longer handed out IP's, DNS stopped working, I couldn't RDP into the server. The ESXi host, my HP server, was still running fine. VSphere was working, and I could look at the performance of the individual guests.I would try Powering off the hosts from inside VSPhere, and the hosts would start powering off, but get stuck at 95%, and stay that way, sometimes only for 10 minutes, others for hours. Several times I had to restart ESXi from it's console in order to restart my machines. Now, can anyone tell me what is happening, and how I can fix it, or take steps to prevent it? I hired a consultant to come take a look at it, someone who's experience and knowledge I trust, and he told me he had never seen anything like this ever before. He spoke to a friend of his who is VM certified, and he also said he had never heard of this issue. Thanks for your replies, and I'll do my best to respond ASAP. Currently, the server is powered off, and I've reinstituted my nine year old Server 2000 boxes, and I'm considering installing ESXi 3.5. Does anyone know a host created in 4.0 will work in 3.5? I'd really like to avoid having to rebuild those accounts! I know 4.0 works on this server, as I have another server in another school with the same exact hardware running 4.0 fine. Brendan

  Read the article

• Setting Up VirtualHosts for a local RubyOnRails Application

  - by chris Frisina

  I want to set up a VirtualHost so that when I type the project name in the address bar, it goes to the home page of the project. httpd-vhosts.conf files in both XAMPP configuration and apache configuration: <VirtualHost project> ServerAdmin [email protected] ServerName project DocumentRoot /Users/path/to/project/public <Directory "/Users/path/to/project/public"> Options Includes FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> RewriteEngine On RewriteOptions inherit </VirtualHost> I have also tried with the path directly to the project folder, and not the public folder of the project. the httpd.conf of XAMPP and apache : # Virtual hosts Include /Applications/XAMPP/etc/extra/httpd-vhosts.conf the /etc/hosts file: 127.0.0.1 other1 127.0.0.1 other2 127.0.0.1 project I have tried : 127.0.0.1 project 127.0.0.1:3000 project 127.0.0.1 project:3000 I have also restarted the rails server and the XAMPP server many times after changes. I have it working so that the project:3000/ works, but how do I get it so that I dont have to specify the port number? Notes: All other VHosts are working well. Rails 3.2.8 (willing to change) Ruby 1.9.3 WEBrick server

  Read the article

• mcelog doesn't fails to start PUIAS 6.4 amd hardware

  - by Predrag Punosevac

  Folks, I am a total Linux n00b. I am trying to deploy mcelog on one of my computing nodes running PUIAS 6.4 (i86_64) [root@lov3 edac]# uname -a Linux lov3.mylab.org 2.6.32-358.18.1.el6.x86_64 #1 SMP Tue Aug 27 22:40:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux a free clone of Red Hat 6.4 on AMD hardware [root@lov3 mcelog]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 4 NUMA node(s): 8 Vendor ID: AuthenticAMD CPU family: 21 Model: 2 Stepping: 0 CPU MHz: 1400.000 BogoMIPS: 4999.30 Virtualization: AMD-V L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 6144K NUMA node0 CPU(s): 0-7 NUMA node1 CPU(s): 8-15 NUMA node2 CPU(s): 16-23 NUMA node3 CPU(s): 24-31 NUMA node4 CPU(s): 32-39 NUMA node5 CPU(s): 40-47 NUMA node6 CPU(s): 48-55 NUMA node7 CPU(s): 56-63 My mcelog.conf file is more or less default apart of the fact that I would like to run mcelog as a daemon and to log errors. When I start mcelog [root@lov3 mcelog]# mcelog --config-file mcelog.conf AMD Processor family 21: Please load edac_mce_amd module. However the module is present [root@lov3 mcelog]# locate edac_mce_amd.ko /lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko /lib/modules/2.6.32-358.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko and loaded [root@lov3 edac]# lsmod | grep mce edac_mce_amd 14705 1 amd64_edac_mod Is there anything that I can do to get mcelog working? The only reference I found is this thread http://lists.centos.org/pipermail/centos/2012-November/130226.html

  Read the article

• Making Apache 2.2 on SuSE Linux Case In-Sensitive. Which is a better approach?

  - by pingu

  Problem: http://<server>/home/APPLE.html http://<server>/hoME/APPLE.html http://<server>/HOME/aPPLE.html http://<server>/hoME/aPPLE.html All the above should pick this http://<server>/home/apple.html I implemented 2 solutions and both are working fine. Not sure which one is better(performance). Please Suggest..Also Directive - CheckCaseOnly on never worked Option 1: a)Enable:mod_speling In /etc/sysconfig/apache2 - APACHE_MODULES="rewrite speling apparmor......" b) Add directive - CheckSpelling on (Either in .htaccess or add in httpd.conf) In httpd.conf <Directory srv/www/htdcos/home> Order allow,deny CheckSpelling on Allow from all </Directory> or In .htaccess inside /srv/www/htdcos/home(your content folder) CheckSpelling on Option 2: a) Enable: mod_rewrite b) Write the rule vhost(you can not write RewriteMap in directory. check apache docs ) <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> This changes the entire request uri into lowercase. I want this to happen for specific folder, but RewriteMap doesn't work in .htaccess. I am novice in regex and Rewrite. I need a RewriteCond which checks only /css//. can any body help

  Read the article

• iTunes Home Sharing only works one way between 2 WinXP PC's on the same LAN

  - by scunliffe

  Both PC's have the latest iTunes installed. PC (A) can "see" that there is a shared library "B library" but attempts to connect to it return this error message: The shared library "{Username}'s Library" is not responding (-3259) Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689. however the reverse works fine. e.g. PC (B) can "see" shared library "A library" and can access all content. Notes: Both PC's have Home Sharing enabled (turned off/on several times to verify). Both PC's have Windows Firewall turned on, but in the exceptions tab, iTunes is allowed, and Port 3689 is also added as a firewall exception (just in case) Both iTunes accounts have been "authorized" on both PC's Both PC's connect via LAN via D-Link DIR-615 router. In the advanced application rules, iTunes has also been added to allow traffic on port 3689 un-hindered. Is there any other magical setting/configuration option that I should be aware of and set in order to get this to work? I could care less about sharing apps etc. I just want the music sharing to work. Update: Solved! It turns out on PC (B) there were multiple accounts set up. 1 of the accounts had the checkbox checked under the windows firewall "On" option which states "No exceptions" thus even though it was added to the exception list on the main user account, this other account was blocking access.

  Read the article

• Is On-The-Fly string replacement possible using GreaseMonkey and Firefox

  - by Gary M. Mugford

  I have looked for means to stop Brightcove videos from autostarting in Firefox and have come to the conclusion it isn't possible without external programming via something like Grease Monkey. However, I'm not proficient in javascript let alone GM. So I thought I'd ask here first whether what I want to do is feasible, or whether it's a fool's errand. What I want to accomplish is have a site specific script executed to replace a string value on the run in that site's code. Specifically, what I am looking for is something GM-style that would do this: if site_domain = 'www.SiteWithAutoPlayVideos.com' then replace_all('<param name="autoStart" value="true" />', '<param name="autoStart" value="false" />'); Having looked through Super User for anything GreaseMonkey that might relate, I see notices that the sandbox GM executes scripts in has to remain separate for security reasons. So, I suspect I might be in for disappointment. BUT if it is accomplishable and somebody here can confirm it, then I will do my best to struggle through the learning curve and get this noisome little problem put to rest. Yes, I have tried Flash Block and FlashDisable in order to attack this issue with no avail. Thanks in advance for your time.

  Read the article

• SVN and WebSVN with different users access restriction on multiple repositories on linux

  - by user55658

  and first of all sorry for my english. I've installed an ubuntu server 10.04.1 with apache2, subversion, svn_dav and websvn. (and others services of course, like php5, mysql 5.1, etc). I've configured my svn with multiple repositories, and each one with differents groups and users, like: /var/myrepos/repo1 group: mygroup1 /var/myrepos/repo2 group: mygroup2 /var/myrepos/repo3 user: johndoe With an easy access on svn_dav, works perfectly, ie: http://myserver/svnrepo1 accesibly only for users on mygroup1 with theirs users of linux and passwords of svn. Also works for the other repos with their users and groups. But when i tried with websvn, shows all repos without take care than if user on mygroup1 can view repo2 (that's i dont want do). You can login as any user on mygroup1, mygroup2, or johndoe, and you login into all repositories. I'll try to find a solution and I'll post the news, if anyone can helpme with this I'll preciated so much!!! Thanks for all I show my files: /etc/apache2/mods-available/dav_svn.conf <Location /svnrepo1> DAV svn SVNPath /var/myrepos/repo1 AuthType Basic AuthName "Repositorio Subversion de MD" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user </Location> <Location /websvn/> Options FollowSymLinks order allow,deny allow from all AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user </Location>

  Read the article

• Trouble serving vhosts when trying to set up wildcard subdomains with dnsmasq in local development e

  - by Jeremy Kendall

  I'm trying to get wildcard DNS enabled on my laptop using dnsmasq. I realize that this has been asked and answered more than once on this forum, but I can't get the solution to work for me. Steps taken so far: Installed dnsmasq Set address=/example.dev/127.0.0.1 in dnsmasq.conf Set listen-address=127.0.0.1 in dnsmasq.conf Ensured nameserver 127.0.0.1 is in /etc/resolv.conf Set prepend domain-name-servers 127.0.0.1; in /etc/dhcp3/dhclient.conf Created a vhost for example.dev Restarted apache and dnsmasq Note: example.dev is not set in /etc/hosts My vhost for example.dev <VirtualHost *:80> ServerName example.dev DocumentRoot /home/jkendall/public_html/example/public ServerAlias *.example.dev # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory /home/jkendall/public_html/example/public> DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> The setup above will server example.dev locally without any problem. It will also serve test.example.dev, but test.example.dev returns the default apache "It works!" index.html from /var/www rather than my index.php in /home/jkendall/public_html/example/public. The solution in this Server Fault thread suggests that address=/.example.dev/127.0.0.1 would resolve my problem, but when I try to use that solution, restarting dnsmasq results in a failure with the error message dnsmasq: error at line 62 of /etc/dnsmasq.conf For grins, I moved my project over to /var/www/example and modified the vhost appropriately. I got the same result as described above. At this point I'm not sure what other steps I can take to resolve the issue. Thoughts?

  Read the article

• AD server within another network - DNS issues

  - by Harry Muscle

  Here's a quick summary of the environment I support: we have a domain (domain A) that has about 20 client computers. The domain server for this domain and all the clients sit within the network infrastructure of a larger domain (domain B). All the computers get their network settings via DHCP from domain B's servers. I have no control and am unable to make changes to anything to do with domain B. The problem I have is that currently in order for my domain's (domain A) clients to be able to resolve the domain server and the shares on it they have their DNS server IP address set to domain A's domain server (via the default GPO). Unfortunately when a laptop (windows and mac) gets taken home, they are still looking for the domain server as their DNS server and obviously can't access the internet correctly outside of our environment. Ideally I need a solution where the machines use domain A's domain server as their DNS when inside the office and use what ever DNS server DHCP gives them when they are outside the office. However, since I have no control over the office DHCP server, I'm not sure how this can be accomplished. Any help and advice that anyone can offer is highly appreciated. Thanks, Harry P.S. The solution I'm trying to find needs to require no involvement from the user.

  Read the article

• Apache mod_rewrite and mod_vhost_alias Virtual Hosts and %1

  - by Matt Wall

  I have put the main bits of my httpd.conf down below. I am using %1 to get the host field so I can dynamically add vhosts by just creating dns/folders. One problem is I need to reference this: HttpStreamingLiveEventPath "D:/FMSApps/%1" HttpStreamingContentPath "D:/FMSApps/%1" In Apache when I try say to do this: http://test.domain.com/hds-vod/myfile.mp4.f4m it sees the %1 in the logs, and fails. Apache gives me this: [error] mod_jithttp [403]: No access to D:/Content/%1/DefaultContent/eve.mp4 What I'm looking for is the D:/Content/%1/DefaultContent/eve.mp4 to become D:/Content/test/DefaultContent/eve.mp4 Anyone have any useful resources / hints etc. to help me? Meanwhile my Google searching continues...! Listen 80 ServerName main1.rtmphost.com AccessFileName .htaccess ServerSignature On UseCanonicalName Off HostnameLookups Off Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 15 RewriteLogLevel 0 RewriteLog logs/rewrite.log DocumentRoot D:/Content LoadModule vhost_alias_module modules/mod_vhost_alias.so VirtualDocumentRoot "D:/Content/%1" RewriteEngine On <Directory /> Options None AllowOverride None Order allow,deny Allow from all Satisfy all </Directory> <IfModule f4fhttp_module> <Location /vod> HttpStreamingEnabled true HttpStreamingContentPath "D:/FMSApps/%1" Options FollowSymLinks </Location> Redirect 301 /live/events/livepkgr/events /hds-live/livepkgr <Location /hds-live> HttpStreamingEnabled true HttpStreamingLiveEventPath "D:/FMSApps/%1" HttpStreamingContentPath "D:/FMSApps/%1" HttpStreamingF4MMaxAge 2 HttpStreamingBootstrapMaxAge 2 HttpStreamingFragMaxAge -1 Options FollowSymLinks </Location> </IfModule>

  Read the article

• Ubuntu in VirtualBox File Modified Time in Future and PHP slow file operations

  - by user1750

  For some reason, some of my files have a last modified date in the future. In addition to this, file operations in PHP are SUPER slow. For example, rebuilding the Symfony2 cache can take over 40 seconds (its takes 1-2 on my MacBook Pro). Notice the time for ListingsCRUDController.php. It just says "2012". In order see the date more clearly I ran ls --time-style="full-iso" -l For some reason it shows that this file's last modified date is ~5 hours into the future. System time: To make things more confusing, the system will intermittently speed up. Suddenly, my app will start serving requests in 1-2 seconds (down from 40 seconds) for no apparent reason. I mean I don't do anything to my code/system config - it just changes. Also, during a slow PHP request, the php5-fpm process (nginx) uses 100% of the CPU for the duration of the request. This is the second VM this has happened on and I need to know why its doing this. It has become unusable. Information About My Setup VirtualBox 4.2.0 Host: Macbook Pro Guest: Ubuntu Server 12.04 Package dkms is installed Timezones match for Ubuntu and PHP. Things I've Tried Both Apache and Nginx. APC enabled and disabled. Xdebug enabled and disabled. 1 processor up to 4 processors. 1gb memory up to 4gb memory. I've installed Ubuntu using the regular kernel and the VM kernel.

  Read the article

• Choosing the right TV tuner - USB or PCI TV tuners, hardware/software, DVB? Hybrid/combo/analog?

  - by Nucleon

  Greetings, I'll start with some background information so you know what I'm trying to accomplish and then get to my question. I work at a Television station in the US and we are working on setting up an online DVR/Podcast system for all of our newscasts. So basically we would be recording every newscast in HD, encoding it to flv/h.264 for viewing in a browser on flash compatible and iphone/ipad devices, eventually migrating to WebM when it's browser compliant. This task is theoretically pretty simple as it all it involves is a TV tuner device and a program like VLC, MythTV or whatever to schedule and dump it to a file, encode it with VLC/FFMPEG and push it to the streaming server. Now to the hardware, in order to accomplish that task, should I use an internal PCI tuner or a USB 2.0 tuner? Is there a difference? The bus speeds of both are not too far apart, and is the bus speed really relevant in this case? Does it matter if the device has a hardware encoder or a software encoder? On many sites the USB was recommended for ease of set up and use, but would it overly task a processor, or is that not a concern as long as it's a decent PC (at least duo core, 6gb ram). What's the difference between the stick USB and the Box USBs? To my understanding analog is basically gone in the US, so we would want a hybrid or combo tuner correct? How do those differ from DVB? Are there any other features or concepts which I am missing which may influence the recommended product. It would be ideal if the device which could work in both Linux and a Windows environment, to my knowledge most Hauppauge are? Example 1: PCI Hauppage http://www.newegg.com/Product/Product.aspx?Item=N82E16815116033 Example 2: USB 2.0 Box http://www.newegg.com/Product/Product.aspx?Item=N82E16815116029 Example 3: USB 2.0 Stick http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031 Any guidance from the Superusers would be much appreciated!

  Read the article

• netconfig won't change DNS on opensuse 12.2

  - by Krystian

  I'm trying to update my dns servers after openvpn connection, but netconfig won't do that for me. Here's how I'm trying to do it [manually now]: /sbin/netconfig modify -v -i tap0 -s openvpn <<-EOF INTERFACE='tap0' DNSSERVERS='10.10.0.1' EOF And here's the verbose output: debug: lockfile created (/var/run/netconfig.pid) for PID 5530 debug: lockfile created debug: write new STATE file /var/run/netconfig//tap0/netconfig0 debug: Module order: dns-resolver dns-bind dns-dnsmasq nis ntp-runtime debug: dns-resolver module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_dns_settings: service 'NetworkManager' => rank '1' debug: get_dns_settings: DNS_SEARCHLIST_1='mydomain.com' debug: get_dns_settings: DNS_SERVERS_1='192.168.0.1' debug: exit get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: write_resolv_conf: ' mydomain.com ' ' 192.168.0.1 ' debug: No changes for /etc/resolv.conf debug: dns-bind Module called debug: dns-dnsmasq Module called debug: nis Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: exit get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: set_nisdomainname: eth0 24 debug: set_nisdomainname: => yes debug: set_nisdomainname: old[]=, new[24]= debug: format_yp_conf called with : debug: Using static fallback debug: format_static[0] called debug: No changes for /etc/yp.conf debug: nis domainname '' is up to date debug: ntp-runtime Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_ntp_settings: NTP_SERVER_LIST='' debug: exit get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig I've been trying to find something relevant on the web, but failed to do so. I have no other clue on how to progress with this issue. Any thoughts?

  Read the article

• Powershell: Execute exe on remote server and capture output

  - by user364825

  I am trying to script the execution of an installer on remote web servers. The installer in question is also a Windows Service that hosts NServiceBus. If RDP'd into the server, the application is installed by the following command: &"$theInstaller" /install /serviceName:TheServiceName The installer prints output about its progress registering the service and connecting to the database to stdout, among other things. This works fine from an RDP session, but when I execute it remotely via PS, I get a you-can't-do-this-over-the-network message if I execute it directly or via Invoke-Command -computername $theRemoteServer: System.IO.FileLoadException: Could not load file or assembly 'file://\\theRemoteServer\c$ \thePath\AutoMapper.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) --- System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. (Note: I added an additional "\" to the path in the first line in order to get it to show up correctly in the preview on this site.) This, and other DLLs, are loaded by the service, and the service's execution context cannot, apparently, be remotified. I have also tried using Invoke-WmiMethod, which does something, but it's not clear what, and the output from the installer is lost: Invoke-WMIMethod win32_process create '"$theInstaller" /install /serviceName:TheServiceName' -ComputerName $server (with and without cmd.exe /k before the intaller reference): __GENUS : 2 __CLASS : __PARAMETERS __SUPERCLASS : __DYNASTY : __PARAMETERS __RELPATH : __PROPERTY_COUNT : 2 __DERIVATION : {} __SERVER : __NAMESPACE : __PATH : ProcessId : ReturnValue : 9 How does one remotely execute such an EXE and capture the output? Thanks!

  Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >