Search Results

Search found 56854 results on 2275 pages for 'temporary internet files'.

Page 511/2275 | < Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >

• This not having job, is driving me nuts!

  - by Ratman21

  I had two jobs lined up (temporary but, hey they pay), one of which was in IT. A very low paying IT job for only 30 hours a week and only 3 weeks. At a large high tech company and a government (a not in my field job) temporary, paying a bit more, for little longer and for up to 40 hours a week. I was going to happily work my little self raged for the next 3 weeks. Guess what, the IT job fell thru and I now feel so let down. This I felt was my chance to get back in to IT, even if it was only for few weeks and maybe get note-us as hard working IT guy. I still have the other job but, let me add that there is no chance that it will turn in to something longer (I have been told that point blank). As I said this is nuts.

  Read the article

• Del/Erase Commands

  - by Robert A Palmer

  I'm currently trying to use the del or the erase command in a RSM Telnet to delete Temp files on users computers. But the problem I'm running into with the command is that it is working, but won't delete any of the files located in the temp folder. Command I'm using : erase c:\users\[username]\appdata\local\temp I have used the command with the /p to prompt me, but some of these temp folders have thousands of files in them and sitting there and pressing Y and then enter endlessly is not going to work, because I have around 90 computers to clean temp files on. Is there something wrong with the command or is there a simpler command to use to delete the temp files on the computer? Thanks

  Read the article

• How can I delete a specific file from a set of results using the find command in Linux?

  - by PeanutsMonkey

  I have the following command that lists all files with the extension doc, docx, etc. find . -maxdepth 1 -iname \*.doc\* The command returns numerous files some of which I would like to delete. So for example the results returned are Example.docx Dummydata.doc Sample.doc I would like to delete Sample.doc and Dummydata.docx. How do I delete the files using the -exec option. Am I able to pass in the names of the files e.g. rm Dummydata.docx Sample.doc hence the command would look as follows find . -maxdepth 1 -iname \*.doc\* -exec rm Dummydata.docx Sample.doc Can I pass the names of the files within {} afterrm`? e.g. find . -maxdepth 1 -iname \*.doc\* -exec rm {Dummydata.docx} Sample.doc Is there a better way of doing it?

  Read the article

• Wiki .NET Parser, C#

  Wiki .NET Parser C#, 3 (4) files with lexer, grammar, parser definition and ANTLR engine

  Read the article

• Wiki .NET Parser, C#

  Wiki .NET Parser C#, 3 (4) files with lexer, grammar, parser definition and ANTLR engine

  Read the article

• Manually updating HTML5 local storage?

  - by hustlerinc

  I'm just starting out HTML5 game developement (and game dev in general) and watching all the videos and tutorials available something has crossed my mind. Everyone keep saying I should set the cookie's (or cached files) to be expired after a certain amount of time. So that when it reaches that time the browser automatically downloads all assets again, even if it's the same asset's. Wouldn't it be possible to manually define the version of the game? For example the user has downloaded all the files for 1.01 of the game, when updating I change a simple variable to 1.02. When the user logs in it would compare his version to the current and if they are not equal only then it downloads the files? This could even be improved to download only specific files depending on what needs to be updated? Would this be possible or am I just dreaming? What are the possible downsides of this approach?

  Read the article

• File store: CouchDB vs SQL Server + file system

  - by Andrey

  I'm exploring different ways of storing user-uploaded files (all are MS Office documents or alikes) on our high load web site. It's currently designed to store documents as files and have a SQL database store all metadata for those files. I'm concerned about growing out of the storage server and SQL server performance when number of documents reaches hundreds of millions. I was reading a lot of good information about CouchDB including its built-in scalability and performance, but I'm not sure how storing files as attachments in CouchDB would compare to storing files on a file system in terms of performance. Anybody used CouchDB clusters for storing LARGE amounts of documents and in high load environment?

  Read the article

• Using Computer Management (MMC) with the Solaris CIFS Service (August 25, 2009)

  - by user12612012

  One of our goals for the Solaris CIFS Service is to provide seamless Windows interoperability: not just to deliver ubiquitous, multi-protocol file sharing, which is obviously a major part of this project, but to support Windows services at a fundamental level.  It's an ongoing mission and our latest update includes support for Windows remote management. Remote management is extremely important to Windows administrators and one of the mainstay tools is Computer Management. Computer Management is a Windows administration application, actually a collection of Microsoft Management Console (MMC) tools, that can be used to configure, monitor and manage local and remote services and resources.  The MMC is an extensible framework of registered components, known as snap-ins, which allows Computer Management to provide comprehensive management features for both the local system and remote systems on the network. Supported Computer Management features include: Share ManagementSupport for share management is relatively complete.  You can create, delete, list and configure shares.  It's not yet possible to change the maximum allowed or number of users properties but other properties, including the Share Permissions, can be managed via the MMC. Users, Groups and ConnectionsYou can view local SMB users and groups, monitor user connections and see the list of open files. If necessary, you can also disconnect users and/or close files. ServicesYou can view the SMF services running on an OpenSolaris system.  This is a read-only view - we don't support service management (the ability to start or stop) SMF services from Computer Management (yet). To ensure that only the appropriate users have access to administrative operations there are some access restrictions on these remote management features. Regular users can: List shares Only members of the Administrators or Power Users groups can: Manage shares List connections Only members of the Administrators group can: List open files and close files Disconnect users View SMF services View the EventLog Here's a screenshot when I was using Computer Management and Server Manager (another Windows remote management application) on Windows XP to view some open files on an OpenSolaris system to prepare a slide presentation on MMC support.

  Read the article

• Move SQL Server transaction log to another disk

  - by Jim Lahman

  When restoring a database backup, by default, SQL Server places the database files in the master database file directory.  In this example, that location is in L:\MSSQL10.CHTL\MSSQL\DATA as shown by the issuance of sp_helpfile   Hence, the restored files for the database CHTL_L2_DB are in the same directory     Per SQL Server best practices, the log file should be on its own disk drive so that the database and log file can operate in a sequential manner and perform optimally. The steps to move the log file is as follows: Record the location of the database files and the transaction log files Note the future destination of the transaction log file Get exclusive access to the database Detach from the database Move the log file to the new location Attach to the database Verify new location of transaction log Record the location of the database file To view the current location of the database files, use the system stored procedure, sp_helpfile 1: use chtl_l2_db 2: go 3:   4: sp_helpfile 5: go   Note the future destination of the transaction log file The future destination of the transaction log file will be located in K:\MSSQLLog   Get exclusive access to the database To get exclusive access to the database, alter the database access to single_user.  If users are still connected to the database, remove them by using with rollback immediate option.  Note:  If you had a pane connected to the database when the it is placed into single_user mode, then you will be presented with a reconnection dialog box. 1: alter database chtl_l2_db 2: set single_user with rollback immediate 3: go Detach from the database   Now detach from the database so that we can use windows explorer to move the transaction log file 1: use master 2: go 3:   4: sp_detach_db 'chtl_l2_db' 5: go   After copying the transaction log file re-attach to the database 1: use master 2: go 3:   4: sp_attach_db 'chtl_l2_db', 5: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB.MDF', 6: 'K:\MSSQLLog\CHTL_L2_DB_4.LDF', 7: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB_1.NDF', 8: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB_2.NDF', 9: 'L:\MSSQL10.CHTL\MSSQL\DATA\CHTL_L2_DB_3.NDF' 10: GO

  Read the article

• Referencing external javascript vs. hosting my own copy

  - by Mr. Jefferson

  Say I have a web app that uses jQuery. Is it better practice to host the necessary javascript files on my own servers along with my website files, or to reference them on jQuery's CDN (example: http://code.jquery.com/jquery-1.7.1.min.js)? I can see pros for both sides: If it's on my servers, that's one less external dependency; if jQuery went down or changed their hosting structure or something like that, then my app breaks. But I feel like that won't happen often; there must be lots of small-time sites doing this, and the jQuery team will want to avoid breaking them. If it's on my servers, that's one less external reference that someone could call a security issue If it's referenced externally, then I don't have to worry about the bandwidth to serve the files (though I know it's not that much). If it's referenced externally and I'm deploying this web site to lots of servers that need to have their own copies of all the files, then it's one less file I have to remember to copy/update.

  Read the article

• Client unable to access OWA website after temporarily changing SSL certificate on the server

  - by Lorenz Meyer

  I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

  Read the article

• External hard drive issue

  - by Blind Fish

  I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

  Read the article

• How could I resolve the following configuration on airport express?

  - by poz2k4444

  I've tried to configure my airport express in order to make a private network and also get access to internet, the thing is my linksys just has broken and all I have is the airport express, I've managed my DHCP to provide IP directions, but the internet connection is not working, is it something with the NAT?? or how can I access internet with my configuration, if the airport is reset to factory settings everything works fine, so, what is the problem?? My computer is going to be DHCP and DNS server

  Read the article

• Configuring network route between two routers on home network

  - by Paul

  I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

  Read the article

• PDFtk Password Protection Help

  - by Dave W.

  I am using Ubuntu 11.10 and am looking for a solution to password protect a bunch of pdf files in a directory in batch. I came across PDFtk and it looks like it might do what I need, but I've reviewed the command line PDFtk examples and can't figure out if there is a way to do it in batch without having to individually specify the output file name for every file. I'm hoping a command-line guru can take a look at the PDFtk syntax and tell me if there is some trick / command that will allow me to password protect a directory of pdf files (e.g., *.pdf) and overwrite the existing files using the same name, or consistently rename the individual output files without having to specify each output name individually. Here's a link to the PDFtk command line examples page: http://www.pdflabs.com/tools/pdftk-the-pdf-toolkit/ Thanks for your help. I think I've answered my own question. Here's a bash script that appears to do the trick. I'd welcome help evaluating why the code I've commented out doesn't work... #!/bin/bash # Created by Dave, 2012-02-23 # This script uses PDFtk to password protect every PDF file # in the directory specified. The script creates a directory named "protected_[DATE]" # to hold the password protected version of the files. # # I'm using the "user_pw" parameter, # which means no one will be able to open or view the file without # the password. # # PDFtk must be installed for this script to work. # # Usage: ./protect_with_pdftk.bsh [FILE(S)] # [FILE(S)] can use wildcard expansion (e.g., *.pdf) # This part isn't working.... ignore. The goal is to avoid errors if the # directory to be created already exists by only attempting to create # it if it doesn't exists # #TARGET_DIR="protected_$(date +%F)" #if [ -d "$TARGET_DIR" ] #then #echo # echo "$TARGET_DIR directory exists!" #else #echo # echo "$TARGET_DIR directory does not exist!" #fi # mkdir protected_$(date +%F) for i in *pdf ; do pdftk "$i" output "./protected_$(date +%F)/$i" user_pw [PASSWORD]; done echo "Complete. Output is in the directory: ./protected_$(date +%F)"

  Read the article

• MS Vista taking too long to identify Wi-Fi connection [closed]

  - by I_M_SUPER_USER

  I with few of my flat-mates share internet connection by using ASL cable into one laptop and then making Adhoc private network so that we all can enjoy internet connectivity. It all worked wonderful few initial days, but now my MS vista is taking much time to identify that adhoc network and it though I am connected to my friend, it takes 5-10 minutes untill I use internet.

  Read the article

• Notepad++ shortcuts not getting copied to the second computer where I want to replicate my settings

  - by Dragos Toader

  In Notepad++, there's a way to assign your custom shortcuts by going to Run - Modify Shortcut/Delete Command... This brings up the Shortcut Mapper I set up my custom shortcuts on Computer 1 I then installed Notepad++ with the same install settings and plugins on Computer 2 I then created a zip archive of my Notepad++ folder in Program Files on Computer 1 I overwrote the Notepad++ folder in Program Files on Computer 2 with this archive My custom shortcuts did not come across. I thought that the shortcuts were saved in C:\Program Files\Notepad++\shortcuts.xml I compared C:\Program Files\Notepad++\shortcuts.xml from Computer 1 with the same file on Computer 2 and the two files are identical. Why then are the shortcuts not coming across to Computer 2? Computer 1 is Windows XP Computer 2 is Windows Server 2008 R2

  Read the article

• One dns server in different subnets

  - by hofmeister

  I have installed a small Linux server; the server is in a different subnet as the internet hosts. I added a route to my nat router to create a connection between both subnets. In both subnets I use an extra dhcp Server. Subnet A: 192.168.0.0/26 Subnet B: 192.168.1.0/26 Router: 192.168.0.1, Server in A: 192.168.0.62, Server in B: 192.168.1.62 internet ____ nat router ___ (Sub A)___ internet hosts | |____(Sub B)___ other hosts I could ping every host. Also the hosts which are connected to the subnet b, has internet connection. But sadly I have a problem with the dns server. I use the dnsServer from my nat router, I set the dns Server for subnet b to the ip 192.168.0.1, but every dns entries are equal with the hostname from my linux server. Example if the hostname from the server is test Test 192.168.0.62 //Server subnet a Test-2 192.168.1.62 //Server subnet b Test-2-2 192.168.1.1 //host a Test-2-2-2 192.168.1.2 //host b Any idea what went wrong? The internet dns resolution works fine.

  Read the article

• Use unnamed object to invoke method or not?

  - by Chen OT

  If I have a class with only only public method. When I use this class, is it good to use unnamed object to invoke its method? normal: TaxFileParser tax_parser(tax_file_name); auto content = tax_parser.get_content(); or unnamed object version: auto content = TaxFileParser(tax_file_name).get_content(); Because I've told that we should avoid temporary as possible. If tax_parser object is used only once, can I call it a temporary and try to eliminate it? Any suggestion will be helpful.

  Read the article

• Git for Application Settings

  - by devians

  I use a lot of tools at work and at home, and im constantly tweaking them in one location or the other. It's somewhat common practice for people to use Git to version their .vim, .vimrc, and other . files, since you can host your config files on github and have the share-ability and all the other advantages that implies. Being able to version and branch my configs sounds like a grand idea, since I'm always messing about with them. I'd like to discuss the best practice for doing this on a slightly wider scope. How would you implement it? Have your configfiles repo in ~/Library/Configs or similar, and symlink the appropriate files? How to handle preference files for Applications, ie iTerm2. These files are recreated every time, so you'd have to symlink 'backwards' and put a link in the repo? rather than symlinking to the repo, since it would just delete the symlink.

  Read the article

• Some PowerShell goodness

  - by KyleBurns

  Ever work somewhere where processes dump files into folders to maintain an archive?  Me too and Windows Explorer hates it.  Very often I find myself needing to organize these files into subfolders so that I can go after files without locking up Windows Explorer and my answer used to be to write a program in something like C# to do the job.  These programs will typically enumerate the files in a folder and move each file to a subdirectory named based on a datestamp.  The last such program I wrote had to use lower-level Win32 API calls to perform the enumeration because it appears the standard .Net calls make use of the same method of enumerating the directories that Windows Explorer chokes on when dealing with a large number of entries in a particular directory, so a simple task was accomplished with a lot of code. Of course, this little utility was just something I used to make my life easier and "not a production app", so it was in my local source folder and not source control when my hard drive died.  So... I was getting ready to re-create it and thought it might be a good idea to play with PowerShell a bit - something I had been wanting to do but had not yet met a requirement to make me do it.  The resulting script was amazingly succinct and even building the flexibility for parameterization and adding line breaks for readability was only about 25 lines long.  Here's the code with discussion following: param(     [Parameter(         Mandatory = $false,         Position = 0,         HelpMessage = "Root of the folders or share to archive.  Be sure to end with appropriate path separator"     )]     [String] $folderRoot="\\fileServer\pathToFolderWithLotsOfFiles\",       [Parameter(         Mandatory = $false,         Position = 1     )]     [int] $days = 1 ) dir $folderRoot|?{(!($_.PsIsContainer)) -and ((get-date) - $_.lastwritetime).totaldays -gt $days }|%{     [string]$year=$([string]$_.lastwritetime.year)     [string]$month=$_.lastwritetime.month     [string]$day=$_.lastwritetime.day     $dir=$folderRoot+$year+"\"+$month+"\"+$day     if(!(test-path $dir)){         new-item -type container $dir     }     Write-output $_     move-item $_.fullname $dir } The script starts by declaring two parameters.  The first parameter holds the path to the folder that I am going to be sorting into subdirectories.  The path separator is intended to be included in this argument because I didn't want to mess with determining whether this was local or UNC and picking the right separator in code, but this could be easily improved upon using Path.Combine since PowerShell has access to the full framework libraries.  The second parameter holds a minimum age in days for files to be removed from the root folder.  The script then pipes the dir command through a query to include only files (by excluding containers) and of those, only entries that meet the age requirement based on the last modified datestamp.  For each of those, the datestamp is used to construct a folder name in the format YYYY\MM\DD (if you're in an environment where even a day's worth of files need further divided, you could make this more granular) and the folder is created if it does not yet exist.  Finally, the file is moved into the directory. One of the things that was really cool about using PowerShell for this task is that the new-item command is smart enough to create the entire subdirectory structure with a single call.  In previous code that I have written to do this kind of thing, I would have to test the entire tree leading down to the subfolder I want, leading to a lot of branching code that detracted from being able to quickly look at the code and understand the job it performs. Overall, I have to say I'm really pleased with what has been done making PowerShell powerful and useful.

  Read the article

• linux routing issue

  - by Duc To

  Hi! I have 2 linksys routers which has linux running on it and using tomato firmware.. both has internet lines plugged on but only 1 acts as DHCP server (router 1) What I am having to achieve is that all packets goes to router 1 from internal IPs want to access internet will go out to that internet line but from 1 specific port, if router 1 detects packets from a specific source port (for ex: http port: 80), it will redirect that packet to router 2 and goes out to the internet from there.. I have found some documents which give solution that I will need a linux servers with 2 ethernet cards and then we plug both internet lines on that server and routing base on it but I do not want to do that because my boss does not want to have an extra work mantaining that server, besides, he says that the router itself already a linux one so why.. I tend to agree his points.. Can it be done or a seperate linux server acting as a router is a must? Thank you all in advance and really look forward in your replies.. I am newbie to linux network and it seems to be something out of my capacity to solve :( Your sincerely! Duc To

  Read the article

• Gzip compress offline?

  - by shoosh

  I've configured my site to serve compressed content by putting this line in .htaccess AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript text/css application/javascript application/json This works perfectly for almost all files except a few large JSON files that are above 200Kb. For some reason they are not being compressed. I see that they don't using the net tab in firebug and the Network section in chrome. So as a workaround I thought I could compress these files offline and have Apache read them compressed. What tool should I use to compress them? is the linux gzip the one? any special flags or something I should use? What should I put in .htaccess so that the server would know to serve these files with content-encoding gzip ?

  Read the article

• how to create java zip archives with a max file size limit [closed]

  - by Marci Casvan

  I need to write an algorithm in java (for an android app) to read a folder containing more folders and each of those containing images and audio files so the structure is this: mainDir/subfolders/myFile1.jpg It must be in java, something like perl script is not an option. It would preferably be for the compressed archive in order to squeeze as many files as possible before mailing the zip. Just a normal zip (no jar). My problem is that I need to limit the size of the archive to 16mb and at runtime, create as many archives as needed to contain all my files from my main mainDir folder. I tried several examples from the net, I read the java documentation, but I can't manage to understand and put it all together the way I need it. Has someone done this before or has a link or an example for me? I resolved the reading of the files with a recursive method but I can't write the logic for the zip creation I'm open for suggestions or better, a working example. EDIT: FileNotFoundException (no such file or directory) this was my initial post at Stack Overflow. I've got an answer to it, but I can't set the size of the ZipEntry and the logic doesn't work and also when extracting the my files from the zip I get the compression method not supported error.

  Read the article

• How to determine if a file has been backed up?

  - by Console

  I try to consolidate old drives to new ones of larger capacity. Sometimes files have been renamed, but are otherwise identical. Sometimes an old directory has just a few more files in it than a newer directory with the same name. Sometimes a file has the same name but the size differs. So I often find myself asking the question: Are there any files on this old drive or directory that I haven't already copied to the new drive? I just want to know that I have the files, I don't want to try and sync stuff automatically (Syncing tools tend to just sync, creating duplicate folder structures and other problems, so I prefer to do it by hand). Basically, if an old drive has a file called "foo.bar" ten directories deep, and my new big drive has an identical file called "oldstuff.zip" in the root, I just want a "yes you have it" or "no, unique files exist". Is there a free tool, a script or a quick and easy method (Mac/Unix or Windows) to get the answer?

  Read the article

< Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >