Search Results

Search found 55281 results on 2212 pages for 'j set'.

Page 515/2212 | < Previous Page | 511 512 513 514 515 516 517 518 519 520 521 522  | Next Page >

• How to remove RAID flag on unstriped drive without losing data?

  - by Alex Folland

  I have a Gigabyte Z68X-UD4-B3 motherboard. It advertises this new thing called "XHD", which is like RAID but makes a SSD and traditional-style drive work together to enable high speed with high capacity. I don't want to use this feature, and I already have Windows 7 64 installed without using this feature. When I first installed my 2 hard drives (1 SSD and 1 traditional-style drive) in my machine and booted it up for the first time, it ran a program from the mobo that asked me if I wanted to set up XHD. Thinking it would go to some config screen, I said yes. It immediately started doing something with my drives and finished. I considered that strange, but figured it wouldn't matter when I simply install Windows onto my SSD only. I now have my BIOS and Windows running in AHCI mode with no RAID arrays and separate drives. My SSD is one of those new Corsair Force GT drives which loses power every so often, causing Windows to BSOD. I've figured everything out about this problem, including installing the latest firmware from Corsair, and the only way to fix it at this point is by installing Intel Rapid Storage Technology to control AHCI instead of Windows, since the Windows AHCI driver disables the drive's power every once in a while and can't be configured not to do so. I've tried installing Intel Rapid Storage Technology. When I reboot my machine after doing so, it BSODs just after the Windows logo. I've figured out this is because my SSD and my traditional drive are flagged as RAID, as seen in the "Intel Matrix Storage Manager" program found by switching the BIOS hard drive handling to "RAID" mode. This is due to the XHD auto-config program I mentioned earlier. Normally, the BIOS is set to AHCI, and when the drives boot in AHCI mode, they work perfectly. So, I've concluded the data is stored in AHCI mode but the drives' flags are set to RAID. I've figured out that I can accomplish my objective by using the "Intel Matrix Storage Manager" program on the mobo (with "Reset disks to non-RAID"), but doing so would cause it to completely wipe the drives I select. I want to simply toggle these flags from RAID to AHCI so Intel Rapid Storage Technology doesn't fail and cause a BSOD upon booting, but without wiping the drives.

  Read the article

• Error in New-MailboxExportRequest - "Couldn't find the Enterprise Organizational Container" even though permissions seem right

  - by tacos_tacos_tacos

  When disabling users I typically will be asked to retain a copy of their mailbox. I accomplish this by literally creating their mailbox in Outlook and then exporting to PST. Is there some way around having to do this just to save a mailbox? Edit: I've tried New-MailboxExportRequest but I keep getting the following after providing an alias: Supply values for the following parameters: FilePath: \\localhost\EXPORT_PST\myuser.pst Mailbox: myuser Couldn't find the Enterprise Organization container. <--- the error I've also tried supplying [email protected] as the mailbox as well. Edit 2: I had already seen the post at http://www.mikepfeiffer.net/2010/10/error-couldnt-find-the-enterprise-organization-container-when-creating-a-new-mailbox-export-request/ so I set the permissions as follows below: NTFS permissions Sharing permissions I am still getting that error. Final Solution In Exchange SP2, it does not warn you that you have not set role assignments, it just fails. So be sure to create a management role for "Mailbox Import Export" and add your user to the group, then restart PowerShell for this to take effect.

  Read the article

• DNS: domain2 points to domain1

  - by Yar

  I have one domain ("domain1") that is set up with hosting and mail (hosted by Gmail Apps). This domain works perfectly. I want a second domain ("domain2") to forward to domain1, but I don't want to use "DNS Forwarding." I would like to have it act EXACTLY like domain1, so that domain2/whatever points to the same resource as domain1/whatever WITHOUT AN HTTP REDIRECT NOR BROWSER TRICKS LIKE FRAMES. I would also love to be able to send mail to "blah@domain2" and have it go to "blah@domain1". Can this be set up, and how? I am using GoDaddy as registrar and DNS host for both domains. GoDaddy is also the web host for domain1, and mail hosting is with Google Apps.

  Read the article

• How do I share a PHP 5.4 server between OS X and VMWare?

  - by Ben

  I'm running PHP 5.4 on OS X which allows me to set up a virtual server for any directory, using this Terminal command: php -S localhost:8000 This will then set up http://localhost:8000 which works great, but what I would like to do is share this server with the instance of Windows that I have running through VMWare in order to test in Internet Explorer. I was wondering if this is possible and if it is, how do I go about setting it up? Currently trying to visit http://localhost:8000 gives me 'This page cannot be displayed'. I'd really appreciate any help that you can give me on this as I don't have much experience with virtual machines/networking. Thanks in advance.

  Read the article

• How to properly backup mediawiki database (mysql) without messing up the data?

  - by Toto

  I want to backup a mediawiki database stored in a MySQL server 5.1.36 using mysqldump. Most of the wiki articles are written in spanish and a don't want to mess up with it by creating the dump with the wrong character set. mysql> status -------------- ... Current database: wikidb Current user: root@localhost ... Server version: 5.1.36-community-log MySQL Community Server (GPL) .... Server characterset: latin1 Db characterset: utf8 Client characterset: latin1 Conn. characterset: latin1 ... Using the following command: mysql> show create table text; I see that the table create statement set the charset to binary: CREATE TABLE `text` ( `old_id` int(10) unsigned NOT NULL AUTO_INCREMENT, `old_text` mediumblob NOT NULL, `old_flags` tinyblob NOT NULL, PRIMARY KEY (`old_id`) ) ENGINE=InnoDB AUTO_INCREMENT=317 DEFAULT CHARSET=binary MAX_ROWS=10000000 AVG_ROW_LENGTH=10240 How should I use mysqldump to properly generate a backup for that database?

  Read the article

• Searching For a Desktop Security Software to harden Windows machines, anybody?

  - by MosheH

  I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So if anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

  Read the article

• Deployment/provisioning tool for commercial applications (not developed in-house)

  - by mfinni

  I help manage a few hosted commercial applications, and we have a lot of manual processes involved when doing new customer-instance deployments into the shared (multitenant) environment. Allow me to describe the most relevant features, and then we can talk about the tools. We have an application on AIX, that requires dozens of changes to config files (some plain text, some XML) as well as a good number of commands to be run on multiple servers - some to start the new instance, some to restart our shared authentication and reporting engines, etc. The config changes follow templates, of course. The servers in question will also depend on the initial conditions specified by the implementer/deployer - we may choose to deploy a given customer to our servers in Europe, or one set of servers may be active-active whereas a different set of servers is active-passive - in short, there's a lot of complications. We have another application that run on IIS 6 and SQL. The DBAs don't want any automation of the SQL components and that's fine with me, but automating the IIS bit would be great. For a new customer instance, we make a filesystem copy of a template Virtual Directory target named after the new customer, make a new AppPool to match, edit a VirDir template .xml file to replace the filepaths and AppPool names with the new ones, and then make a new VirDir from the modified template XML to point to the new filesystem folder and app pool. For the first case, something like ControlTier or Chef might be good. For the second, the new(ish) Web Deploy from MS would probably do a good job. Has anyone used these tools or others to do something similar for applications? More of a nice-to-have, not a fixed requirement - Has anyone used anything that works on both platforms? I'm looking for something free, because the official word is that within a year, we will have whatever HP has renamed the OpsWare suite, which should be able to do stuff like this. Edit - based on someone's suggestion, looking at CFengine for the AIX application, it doesn't seem to address my pain. The problem isn't keeping a given config synced across dozens of servers, we have rsync for that. The problem is that onboarding a new customer instance touches dozens of files, putting pieces of the same or similar information into them - some are new stanzas in existing files, some are new files, and some are new directories. This is a several-hours-long process that is also error-prone because it's mostly done by hand. I guess I'm looking for config-file generation and management. I have built a small Perl script to do something similar for a much smaller case - it binds a CSV file into variables, and then does a copy-and-search-and-replace from a set of template config files. I could probably do the same here.

  Read the article

• Address VMWare Fusion Linux guest by hostname?

  - by amrox

  I have a Ubuntu Server 9.04 image set up in VMWare Fusion 3.0.0, using the NAT option for the guest's network connection. From the Mac host, I can ssh to the linux guest just fine using it's IP address, but I would like to be able to refer to it by hostname for connivence. ie: mac-host:~ ssh [email protected] I had a similar setup using Parallels a couple years ago, but I don't remember how it was set up. It may have "just worked". Any suggestion on how to make this work?

  Read the article

• DSL-504T as dumb ADSL modem

  - by petebob796

  I am trying to setup an existing DSL-504T ADSL router to work as a dumb modem for a DIR-825 wifi router. I am assuming I should try and move as much of the control to the DIR-825 as possible. It's a PPPoA connection so I don't think I can use bridge mode. Does anyone have any guidance on this? Should I have 2 subnets? Should I set the DIR-825 as the DMZ on the DSL-504T? Do I need to keep NAT and firewall enabled on DSL-504T? Basically I have it working but want to know if I have set it up correctly as I really want the QoS to work on the DIR-825.

  Read the article

• FTP server questions

  - by Brad

  I'm currently trying to set up a home FTP server using debian and proftpd and I've run into a problem that has me confused. I have most things set up already, I believe, but I cannot access my ftp server using my external ip. I've forwarded the correct port on my router and I've checked http://www.yougetsignal.com/tools/open-ports/ to be sure that it is, in fact, opened. I've used telnet locally on my server to check that the port accepts connections. I am able to use ftp via LAN. But, I still cannot access anything externally. I'm thinking that there's still some router configuration to be done in order to fix this, such as routing all connections on my ftp port to my server via the internal ip, but I can't find any option on my router to do this. Is this a necessary step? There is an option to use DMZ hosting, but I'd rather avoid it if possible. I can provide additional information as requested, please let me know any information that you think could help at all. Thanks. -Brad PS - I have a Telus Actiontec Modem/Router Update - !! Trying my ftp server out at work, worked! I guess I did set it up correctly after all. What is confusing me, though, is why doesn't the server allow me to connect locally anymore? That seems very weird to me. Also, I don't really understand why I am denied outright if I attempt to connect from the same network using the external address. I'll look into it more when I get home, but thank you guys for your help. Update 2 - I found the problem with not being able to connect locally anymore. I was setting the masquerade address to my external IP and for some reason that was causing it to hang on MLSD when I connected using my LAN address. I've removed the masquerade address and I'm going to check if I need it at work tomorrow. I'll update this page if I find anything.

  Read the article

• Multiple Reporting Services databases in one instance?

  - by Tedd Hansen

  Is it possible to have multiple Reporting Services databases in one MSSQL instance? I have a MSSQL 2008 R2 with RS set to SharePoint Integrated Mode. This RS is in use and can't be changed. I do however need a RS in native mode for the TFS installation to be able to use it. Am I required to set up a new instance of MSSQL? Bonus question: If so, is that permitted under the MS licensing scheme or is it an additional cost?

  Read the article

• Printer Properties not sending the correct page size to program

  - by Jeff

  We have a Zebra 2844 Label Printer with 4"x3" labels in it. When we check the page settings in Windows XP, it is set to the correct size. When we go to print out of any program, it prints 4"x11". I have checked the page settings in one of the programs that we are using and it does show correctly the 4"x3" settings but prints at the incorrect 4"x11". I have followed the steps here Paper size: Printer Properties vs Page Setup and here Is there a way to programatically set the printer properties in windows? but have not been able to glean enough information to figure it out. If anyone can help, I would appreciate it!

  Read the article

• How to specify an SSH key for Hudson with git plugin?

  - by jlpp

  I've got Hudson (continuous integration system) with the git plugin running on a Tomcat Windows Service. msysgit is installed and the msysgit bin dir is in the path. PuTTY/Pageant/plink are installed and msysgit is configured to use them. The trouble I'm running in to, I think, is that the user who owns the Tomcat/Hudson service (Local System) has no SSH key set up to be able to clone the git repository. When the git Hudson plugin tries to clone it gives the error: $ git clone -o origin git@hostname:project.git "e:\HUDSON_HOME\jobs\Project Trunk\workspace" ERROR: Error cloning remote repo 'origin' : Could not clone git@hostname:project.git ERROR: Cause: Error performing git clone -o origin git@hostname:project.git e:\HUDSON_HOME\jobs\Project Trunk\workspace Trying next repository ERROR: Could not clone from a repository FATAL: Could not clone hudson.plugins.git.GitException: Could not clone My question is, how can I set things up so that the git plugin/msysgit know to use a particular SSH private key when trying to clone? I don't think Pageant will work because the Tomcat service is running as the "Local System" user, but I may be wrong.

  Read the article

• Notification if SyncToy fails

  - by Joel Coehoorn

  I support a number of laptop users. In the past (before there were many laptops), each user's computer was set up so that their My Documents folder was mapped to a shared folder on the server. This worked very well for desktops, but has several obvious downsides for laptops (no files when you're off-site, etc). I'm exploring several alternatives for laptops to better map the shared drives, and SyncToy seems the best so far. I have a couple trial users set up so that it syncs automatically whenever they log in, along with a desktop icon they can click if they know they'll need something saved before the next login. My problem is that I'm concerned how I, as the maintainer of this system, can spot failures. I don't want my first indication of a problem to come after a user drops their laptop in a lake and it turns out nothing was synced for the last year. Any ideas?

  Read the article

• I can only see the first website alphabetically

  - by Victor

  I have 3 subdomains websites. Those are subdomain1.mydomain.com, subdomain2.mydomain.com, subdomain3.mydomain.com. I have point these to the external IP address. bind is ok, dig is onerror, Apache2 reload ok 1.) If I set the following, I can only see the first one alphabetically. NameVirtualHost *:80 <VirtualHost *:80> ServerName subdomain1.mydomain.com ... <VirtualHost *:80> ServerName subdomain2.mydomain.com ... 2.) If I set the following, I get file not found. Apache2 reload ok. NameVirtualHost mydomain.com:80 <VirtualHost mydomain.com:80> ServerName subdomain1.mydomain.com ... <VirtualHost mydomain.com:80> ServerName subdomain2.mydomain.com Please Help! What else should I do.

  Read the article

• NTP configuration not recognized?

  - by Eugene S

  I'm trying to configure NTP on my machine but it seems that the parameters I set are not being read by the system. Below is my /etc/ntp.conf file. (I applied the most basic configuration to eliminate other issues) server 10.45.68.47 server 127.0.0.1 After I set the above configuration, I restart the ntpd process by doing the following: service ntpd restart And then I get the following output: Shutting down ntpd: [ OK ] ntpd: Synchronizing with time server: [FAILED] Starting ntpd: [ OK ] Moreover, I can see the following in /var/etc/messages: Apr 2 10:54:07 hsystem1a ntpd[21067]: ntpd exiting on signal 15 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer1 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer2 Apr 2 10:54:07 hsystem1a ntpdate[21537]: no servers can be used, exiting So it seems that the ntpServer1 and the ntpServer2 are being read from somewhere instead of the IPs I configured in /etc/ntp.conf. NOTE: I done init 6 on the machine just in case. Thanks!

  Read the article

• How can I VPN into a domain and act as if it is local?

  - by Duall

  I've looked and looked and the internet seems to have finally failed me, there's no information on my specific issue. I have two locations, and one server (sbs 2008); I need them to act like one physical LAN. I know it's possible, I just know how to set it up, or anything about VPNs, etc. So, just to clarify a bit more: 1 Small Business Server 2008 ~30 Computers with varying systems from Windows XP to 7 2 Physical Locations I use redirected folders, but since that would consume a lot of bandwith over VPN, I have a machine over there that can be the workhorse for storage. Users need to access e-mail and shared databases from this server (or possibly some form of DFS with aforementioned workhorse) from the other building. Is there a nice tutorial (or I nice person that wants to write it) online that can explain how to set up computers from an external network to act like they were in the LAN?

  Read the article

• Is it possible to boot from a USB Flash Drive on a Mac?

  - by cust0s

  The title says it all. Current set-up is an iMac (early 2008) running Snow Leopard.

  Read the article

• Does lshw list the "factory" speed of a memory module or the effective speed and how to find the former?

  - by Panayiotis Karabassis

  I hope I phrased this correctly. lshw gives: description: DIMM Synchronous 400 MHz (2.5 ns) product: M378B5773CH0-CH9 vendor: Samsung physical id: 0 slot: DIMM0 size: 2GiB width: 64 bits clock: 400MHz (2.5ns) And indeed the memory speed is set is set to 800MHz in the BIOS, which I think makes sense since it is a double rate. On the other hand, Googling strongly suggests that to this product number corresponds the PC3-10600 type, which is 1333MHz, not 800MHz. And this seems to be confirmed in the BIOS, where if I select Auto for memory bus speed, 1333MHz is selected "based on SPD settings". However in the latter case, the computer does not boot, i.e. the kernel panics, complaining that something attempted to kill the Idle process. So, I am I am beginning to suspect that I have been given defective memory, the technician that installed saw this, and lowered the bus speed. Is this a possibility?

  Read the article

• Moving default web site to another drive

  - by Chadworthington

  I set the default location from c:\inetpub\wwwroot to d:\inetpub\wwwroot but when I access my .NET 4.0 site get this error: Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. Source Error: Line 105: Set explicit="true" to force declaration of all variables. Line 106: --> Line 107: <compilation debug="true" strict="true" explicit="true" targetFramework="4.0"> Line 108: <assemblies> Line 109: <add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> When I try to Manage the Basic Settings on the Site and click the "Test Settings" button, I see that I have a problem under "authorization:" The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that <domain>\<computer_name>$ has Read access to the physical path. Then test these settings again. 1) Do I need to grant rights to IIS to the new folder? Which user? I thought it was something like IIS_USER or something similar but I cannot determine the correct name of the user. 2) Also, do I need to set the default version of the framework somewhere at the Default Site level or at the Virtual folder level? How is this done in IIS6, I am used to IIS5 or whatever came with XP Pro. 3) My original site had a subfolder under wwwroot called "aspnet_client." How was this cleated? I manually copied it to the corresponding new location. My app was using seperate ASP specific databases for storing session state and role info, if that is relevant. Thanks

  Read the article

• Corrupt mysql system tables

  - by psynnott

  I am having issues with the columns_priv table in the mysql system database. I cannot add new users currently. I have tried repairing it using mysqlcheck --auto-repair --all-databases --password but I get the following output: mysql.columns_priv Error : Incorrect file format 'columns_priv' error : Corrupt Is there any other way to repair this table, or how do I go about replacing it with a blank table? What would I lose by doing that? Thank you Edit (Additional Info) mysqld is currently using 100% cpu constantly. Looking at show processlist, I get: mysql> show processlist; +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | 5 | debian-sys-maint | localhost | mysql | Query | 1589 | Opening tables | ALTER TABLE tables_priv MODIFY Column_priv set('Select','Insert','Update','References') COLL | | | 752 | root | localhost | NULL | Query | 0 | NULL | show processlist | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• Where is IIS7 redirect occuring?

  - by neildeadman

  I have a site that is set up in IIS7 and is working (although I don't understand how). The binding is www.mysite.fr on port 80. In the root of the site there are no files but several folders. The site loads fine but I don't understand how it is loading? If I go to https://www.mysite.fr/ it redirects to https://www.mysite.fr/fr/ which redirects back to https://www.mysite.fr/ So we end up in an endless loop which fails. Using fiddler it is a 301 redirect but I have no idea where this is set! I guess it might be in the website code but as I don't know which file is loaded first, I don't know where to look! Any ideas?? All other sites are working fine...

  Read the article

• How to remove Excel List Manager?

  - by jdmuys

  I have a spreadsheet with columns set as using the List Manager. I want to remove the list manager. However, the "Remove List Manager" item in the "List" menu of the List toolbar is always disabled. I tried selecting a number of different set of cells in the list, to no avail. "Remove List Manager" stays stubbornly disabled (grayed out). What am I missing? I am using Excel 2008 version 12.1.5.

  Read the article

• postgresql 9.1 Multiple Cluster on same host

  - by user1272305

  I have 2 cluster databases, running on the same host, Ubuntu. My fist database port is set to default but my second database port is set to 5433 in the postgresql.conf file. While everything is ok with local connections, I cannot connect using any of my tools to the second database with port 5433, including pgAdmin. Please help. Any parameter that I need to modify for the new database with port 5433? netstat -an | grep 5433 shows, tcp 0 0 0.0.0.0:5433 0.0.0.0:* LISTEN tcp6 0 0 :::5433 :::* LISTEN unix 2 [ ACC ] STREAM LISTENING 72842 /var/run/postgresql/.s.PGSQL.5433 iptables -L shows, Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• Changing time or offsetting it in OpenVZ contained server

  - by Milad Naseri

  I am trying to run a VPS, a Debian box contained in an OpenVZ container. Obviously, I cannot use time --set or any such command, as the time must be set via the parent node. The owner of the parent node, however refuses to adjust the time (which is 30 minutes slower than the actual time). All the programs on my system, consequently, now recognized the false time and this throws a wrench in my syncing. Is there a way to possibly change the system time without interference from the container's administrator? Or perhaps, failing that, a way to make the programs "see" the time 30 minutes faster than what is reported by the container?

  Read the article

< Previous Page | 511 512 513 514 515 516 517 518 519 520 521 522  | Next Page >