Search Results

Search found 21184 results on 848 pages for 'cable internet'.

Page 518/848 | < Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525  | Next Page >

• Multi serial devices on one port

  - by adopilot

  I am developing one software for managing parking lot. System is designed to use four HID RFID devices for authorization clients on gates. Each device should be connected to server by Serial port RS232. Now I wondering is there some device or method to join all that devices on one device and after that to I have only one RS232 cable connected to server. My problem is in that RFID card readers are simple (stupid) devices and there I am not able to change anything, but Ill like to know from which specific device is coming input. What Ill want to do with that new device which need to join four readers is to add suffix or prefix to string that sent from RFID card reader. So I can identify device that is sending card number to my server. I am developing my system on Win platforms.

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• Web Application Publishing on Citrix with Restricted Access

  - by Kanini

  We have a Citrix setup enabling users to access our applications from home. Basically, they login to our site using the Windows Authentication. Once, the are successfully logged in, they see the following icons Desktop - Full Screen (which provides them the Desktop as they would see when the login in our office) We now have a requirement where we would like to publish a web application, hxxp://ourlibrary on Citrix with the following security requirement. (this application is already accessible if the users launch the desktop and launch IE within it and navigate to it) The requirement is this - When the are successfully authenticated to our site, they should be able to see The Internet Explorer icon only, NOT the Dekstop - Full Screen icon. On clicking on the icon, Internet Explorer should open up and should automatically navigate to hxxp://ourlibrary They should not be able to access any other URL, such as Google, Hotmail etc., They should not be able to go FileOpen and Browse They should not be able to do FileSave and Browse In effect, they should be able to view the site and that should be it. Any ideas on how to accomplish the security feature? We have already published the application.

  Read the article

• Connection refused in ssh tunnel to apache forward proxy setup

  - by arkascha

  I am trying to setup a private forward proxy in a small server. I mean to use it during a conference to tunnel my internet access through an ssh tunnel to the proxy server. So I created a virtual host inside apache-2.2 running the proxy, the proxy_http and the proxy_connect module. I use this configuration: <VirtualHost localhost:8080> ServerAdmin xxxxxxxxxxxxxxxxxxxx ServerName yyyyyyyyyyyyyyyyyyyy ErrorLog /var/log/apache2/proxy-error_log CustomLog /var/log/apache2/proxy-access_log combined <IfModule mod_proxy.c> ProxyRequests On <Proxy *> # deny access to all IP addresses except localhost Order deny,allow Deny from all Allow from 127.0.0.1 </Proxy> # The following is my preference. Your mileage may vary. ProxyVia Block ## allow SSL proxy AllowCONNECT 443 </IfModule> </VirtualHost> After restarting apache I create a tunnel from client to server: #> ssh -L8080:localhost:8080 <server address> and try to access the internet through that tunnel: #> links -http-proxy localhost:8080 http://www.linux.org I would expect to see the requested page. Instead a get a "connection refused" error. In the shell holding open the ssh tunnel I get this: channel 3: open failed: connect failed: Connection refused Anyone got an idea why this connection is refused ?

  Read the article

• Laptop connected to external monitor results in desktop overflow

  - by Andrew Fox

  I have a laptop (MSi FX600) connected to an external monitor (Toshiba 19AV500U) with the screen resolution set to the monitors recommended setting of 1440x900. The problem is the desktop is overflowing the display, meaning all edges of the desktop are cut off, so I cannot see the close, minimize buttons on the top and I only see half of the taskbar at the bottom. I have tried many different resolutions but none of them solve the problem. I have had this same problem when connecting to other external monitors in the past, but not all of them, it seems to be fairly random. I have tried to find a way to manually adjust the resolution but I cannot see a way to do this in my settings. All windows updates are up to date, I am connecting through an HDMI cable and I have it set to display only on the external monitor and not extended desktop.

  Read the article

• How do you test if a PCI slot is working - motherboard diagnostic software?

  - by Adam

  I suspect that my motherboard is bad, and that my PCI-E slot is not working. I have a Gigabyte motherboard that had a Hauppage 2250 working fine in the PCI-E slot for many months. However - recently - would not get TV channels that I used to get --- until finally Media center cant detect any channels at all. Got a new tuner card (ATI 350 card) - cant detect any channels. The cable signal is good - I have it connected directly to a TV - all channels come in clear. SO that is why I suspect a motherboard problem. Are there any motherboard diagnostic scanner utilities that can verify I need a new motherboard

  Read the article

• Proxy settings in Java mail API

  - by coder

  I've written a piece of java code where user1 sends email to user2. I'm behind a proxy and hence I'm getting a javax.mail.MessagingException. How do I solve this problem? Here is the code- import java.util.Properties; import javax.mail.Message; import javax.mail.MessagingException; import javax.mail.PasswordAuthentication; import javax.mail.Session; import javax.mail.Transport; import javax.mail.internet.InternetAddress; import javax.mail.internet.MimeMessage; public class Mail { public static void main(String[] args) { final String username = "[email protected]"; final String password = "abc"; Properties props = new Properties(); props = System.getProperties(); props.put("mail.smtp.auth", "true"); props.put("mail.smtp.starttls.enable", "true"); props.put("mail.smtp.host", "smtp.gmail.com"); props.put("mail.smtp.port", "587"); Session session = Session.getInstance(props, new javax.mail.Authenticator() { protected PasswordAuthentication getPasswordAuthentication() { return new PasswordAuthentication(username, password); } }); try { Message message = new MimeMessage(session); message.setFrom(new InternetAddress("[email protected]")); message.setRecipients(Message.RecipientType.TO, InternetAddress.parse("[email protected]")); message.setSubject("Testing Subject"); message.setText("Dear Mail Crawler," + "\n\n No spam to my email, please!"); Transport.send(message); System.out.println("Done"); } catch (MessagingException e) { throw new RuntimeException(e); } } }

  Read the article

• How can I watch TV on my Computer (Not Online)?

  - by Sammy

  Novice question here, but how can I watch TV on my PC without using online sites? I have heard of tv tuners but is it just a matter of hooking a tv tuner to your computer and that's it? Do I have to just buy a tuner or pay for a service as well? If no service needs to be paid for, will I get just regular channels or cable/satellite channels as well? Will my PC need to be connected to the Internet when I want to watch TV? Do I need any type of software aside from the hardware tuner?

  Read the article

• How to make phone calls using a phone

  - by user18151

  Hi, I have a phone landline connection and I DO NOT have a phone instrument. I connect the cable into my laptop, and want to make calls using my laptop. I have an HDA CX20561 modem. I seem to be able to dial number using dialer.exe, though nothing seems to happen. From Microsoft kb http://support.microsoft.com/kb/958143, it looks like dialer.exe alone is not enough for the call. Can somebody tell me how to make and receive phone call with whatever hardware I have, i.e. what software will I need. Thanks.

  Read the article

• Windows 7 setup can not find hard disk

  - by Akshay Kulkarni

  Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

  Read the article

• Using modem for sending voice recording

  - by ircmaxell

  I've got an interesting one for you. I've been going over my server monitoring and notification systems (Nagios based), and realized that if our internet connection goes down, there's no way for it to notify me. I already have a modem listening (Via CentOS 5) on a spare POTS line so that I can dial-in in case our internet goes down. I was wondering if I could come up with a script (Shell, Python, etc) that can dial out and play a recorded message (wave file I'm guessing) when it's picked up. I know Windows supports voice calls over a voice modem, I was wondering if a solution existed for Linux... I know asterisk can probably do it, but isn't that overkill (A full blown VOIP system just for a notification mechanism that will hopefully never be used)? And wouldn't it interfere with the modem's primary function as a backup network interface (PPP spawned via mgetty)? I've done some searching, and haven't really come up with much. I know how to dial out from the command line, but only as a modem (not as voice). Worst case, I could set it up to dial out as a modem, and then just realize that if I get a call with modem sounds from that number that it's the notification... Any insight would be appreciated...

  Read the article

• Setting up a router as a DNS server only

  - by Jacob R

  I have a Linksys WRT54GL router that I don't need anymore, since I had to buy a 3G capable router (Dovado 3GN). As I only have a 3G connection at home, I want to optimize it as much as possible. I want to setup a caching DNS server, including some blacklisting of ad domains. The router currently runs the DD-WRT firmware. Is it possible to use this router as an ordinary computer, running only a DNS server, disabling all other features such as DHCP, WLAN, etc? Connecting it to my other router, should I simply run a cable into the WAN-port of the Linksys router?

  Read the article

• Disabling at application level a nic (network interface) on Windows

  - by Leandro

  How can I disable at application level a network interface? The main question is this: If I disable the nic trough wmic (win7) or devcon (XP), the "plug and play" of a wired nic doesn't work any more. For example, if the user put the cable on a disabled nic, the OS doesn't know about it. So I need to persist the enable condition but disabling the networking like a disable nic. There's some API, network configuration (routing, changing ip, changing gateway, any), .NET Framework resource (Only NetFramework 2.0) or do you can think in any workaround to do this? Suggest and ideas also will be treated as a solution. Thanks and kind regards.

  Read the article

• Heartbeat won't start up from a cold boot when a failed node is present

  - by Matthew

  I currently have two ubuntu servers running Heartbeat and DRBD. Let's say one node is down... The servers are directory connected with a 1000Mbps cross over cable on eth1 and have access to a IP camera LAN on eth0 The node that is still functioning won't start up heartbeat and provide access to the drbd resource. I have to manually restart heartbeat by "sudo service heartbeat restart" to get everything up and running. How can I get it to start fine from a cold start? Here is the my ha.cf and some material from the syslog... If I'm missing any information that might be of some help. http://pastebin.com/rGvzVSUq <--- Syslog http://pastebin.com/VqpaPSb5 <--- ha.cf

  Read the article

• Router block some sites

  - by Mahesha999

  Hi I was using ADSL Modem/Router earlier. The device is quite old Pronet PN-ADSL 101 E/U model (pics: http://bit.ly/P2YaWy, http://bit.ly/OA700l) Since it had only one RJ45 out, I bought new Wireless Router TPLink TL-WR941ND. It has 4 RJ45 out and 3 wireless antennas. I configured my old router in bridge. Now, if I have to connect my pc to Internet through the old router, I have to enter username and password. Then I connected the RJ45 output of old router to the WAN in of new router. and ran the CD of new router. It configured the new router in PPPoE by saving the username and password in router to dial automatically. So now I have to just plug in the wires in my new routers any RJ45 out. I am able to access the Internet when I connect through new router (both wired and wirelessly), but some sites are getting blocked. Most notably yahoo.com (though ymail.com is working), Microsoft.com. msn.com. These sites work perfectly fine when I connect my pc directly to my old router and enter username and password manually. (However others like google.com. facebook.com works fine when connect through new router) So here these some sites need some parameter set but I am unable to find them out. Can anyone help me. My friend said he also faced same problem. Surprisingly he advised me to see if the same websites will work through Opera turbo mode and boom they worked. So what could be the problem?

  Read the article

• Can you play Halo 2 and Halo 3 on an Xbox360 Arcade?

  - by Jeremy Rudd

  I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 and Halo 3? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

  Read the article

• Direct DB to Web Server connection

  - by Joel Coel

  I have a database server sitting right underneath a virtual machine host server in the rack, and this vm host is primarily responsible for servers hosting a couple different web sites and app servers that all talk to databases on the other server. Right now both servers are connected to the same switch, and I'm pretty happy with the pathing. However, both servers also have an unused network port. I wondering about the potential benefits of using a short crossover or normal+auto mdix network cable to connect these two servers together directly. Is this a good idea, or would I be doing something that won't show much benefit and is just likely to trip up a future admin who's not looking for this? The biggest weakness I can see right now is that this would likely require a code change for each vm app to point to the new IP of the database server on this private little network, and if I have a problem with the virtual machine host and have to spin up it's guests elsewhere while I fix it I'll have to change this back before things will work.

  Read the article

• What is the best way to setup a public and private wireless access point on the same home network?

  - by Dougman

  For my home network (with internet provided from a cable modem) I would like to setup a secure wireless access point that I use for all of my personal connections (home PC, iPhone, Xbox, etc) and also another public access point that friends and folks in the neighborhood may connect to (for good karma). I want to ensure that my private traffic cannot be accessed from users of the public access point. I currently have one router that is running the Tomato firmware that I use with WPA security. What is the best way to accomplish this kind of setup securely (if it is possible in a home environment)?

  Read the article

• When my printer fails to print with only "printer error" as the message, how can I find details?

  - by lavinio

  Setup: Dell Latitude D620 in the docking station HP color laserjet 2550L Parallel cable Sometimes when I undock (and I do suspend before undocking and docking), when I reattach, the printer will not print. It simply says "error", with no description. Killing and restarting the spooler will not help, but rebooting will. There is nothing in the system event logs, nor does the print spooler window provide any details other than "error" My question is, when there is an error, is there any way to find out what is causing it to get stuck, so that I can "unstuck" it instead of rebooting?

  Read the article

• NIC light is turned off after boot on Redhat 4.6 server

  - by hoffmandirt

  I have a 2950 blade server setup with Red Hat 4.6 installed. I cannot get the NIC to work properly after reinstalling Linux. I activated the NIC, but the NIC light will not turn on when I plug the network cable into the hub. The status light on the hub will not turn on either. If I run ifconfig, the NIC status is UP. Also I can ping the IP address that I assign to the Linux machine, but I can't ping anything else that is plugged into the hub. When I reboot the system, the NIC light will stay on until the system fully boots and then it will turn off again. Is there something else that I need to do to get the NIC working? It appears to be disabled even though ifconfig says that it is UP. Maybe I need to configure something within the blade server (iDRAC)?

  Read the article

• Having trouble mapping Sharepoint document library as a Network Place

  - by Sdmfj

  I am using Office 365, Sharepoint Online 2013. Using Internet Explorer these are the steps I have taken: ticked the keep me signed in on the portal.microsoftonline.com page. It redirects me to Godaddy login page because Office 365 was purchased through them. I have added these sites to trusted sites (as well as every page in the process) and chose auto logon in Internet explorer. Once on the document library I open as explorer and copy the address as text. I go to My Computer and right click to add a network place and paste in the document library address. It successfully adds the library as a network place 30% of the time. I can do this same process 3 times in a row and it will fail the first 2 times and then succeeds. It works for a little while and then I get an error that the DNS cannot be found. I need multiple users in our organization to be able to access this document library as if it was a mapped network drive on our local network. Is there an easier way to do this? I may just sync using the One Drive app but thought that direct access to the files without worrying about users keeping their files synced.

  Read the article

• How to find ip address of my Asus RT-AC86U in Access Point mode?

  - by WilliamKF

  I'm using an Asus wireless router model RT-AC68U and can connect fine to the internet using it wirelessly. I configured the router to be an Access Point, but having done so, I can no longer locate the GUI to adjust the router as I have no idea what its IP Address is anymore. The router is plugged into a cable modem and router which is a model SMCD3G is a business class gateway labeled Comcast Business IP Gateway. This gateway is assigning ip addresses in the range 10.1.10.XX and I went to the web interface at 10.1.10.1 and listed the connected devices and see my laptop which is connected to the Asus access point along with a few other devices, but none of the devices listed are the Asus router (I tried all the six ip addresses listed). How can I determine the IP Address of my Asus router in access point mode so I can see the GUI interface again to control the router other than by doing a factory reset?

  Read the article

• How to reset a Fritz!Box DSL router to factory settings?

  - by damluar

  I need to change the setting of router Fritz Box. The setting were set by another person. I can't connect to router using cable, may be standard port or address were changed. So the only option is to switch to factory settings. Usually there is a button which deletes all the settings. I read the documentation and they tell to call the number #991*15901590* on the router. Do I have to connect telephone to router?

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

< Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525  | Next Page >