Search Results

Search found 18243 results on 730 pages for 'tcp connection'.

Page 518/730 | < Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525  | Next Page >

  • why this routing configuration does not work?

    - by avs099
    I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - Setup guide recommendations?

    - by Peter Mounce
    I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. My ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • MySQL query works in Workbench but gives error code 63 from PHP

    - by smund3
    I am making a poll system with PHP/MySQL and have made created a MySQL user for the system to use. However, whenever I try to run a query from PHP as that user, I get error code 63, which after some Googleing I found out means: OS error code 63: Out of streams resources If I make the PHP script use an almighty user instead, everything works fine, so it looks like it has something to do with permissions. I am using a non-persistent connection. I have Googled a lot but I haven't found anything even slightly relevant to this issue. What could cause this error? EDIT: Now it actually started giving me a different error: OS error code 65: Package not installed ...all I did was revert the script to using the poll user instead of the almighty one.

    Read the article

  • How to block spam site republishing my content

    - by Fo.
    I noticed today that Google search results shows some spam copies of one of my sites. The url looks something like this: http://[subdomain].spamsite.com/www.example.com ...where example.com is my site. In my Apache access logs I'm noticing several lines like the following whenever I load the above url: 127.0.0.1 - - [219/Oct/2012:19:27:34 +0000] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The spammer's site shows an exact up to date copy of my site, so I think they are pulling in live data. Any idea how I can block this traffic?

    Read the article

  • Windows 7 unresponsive after hibernate.

    - by Simon Verbeke
    The last few days, when I get Windows out of hibernate, Windows itself gets unresponsive. I can use any of my programs that were already opened before hibernating, but the window functions (closing, changing the size etc) aren't reacting. I can't open any new programs, except for the Task Manager. Also, I don't get an Internet connection. When I use Ctrl + Alt + Del, I get either a black screen, or the regular background. Then it hangs and after a while shows me a message that Windows failed starting up that "thing"(don't know what it's called in English, something with safety, etc). I have Windows 7 Ultimate installed.

    Read the article

  • Remote Desktop via VPN from Mac to Windows Vista

    - by Vegar
    I have some problems connecting to my office from home. I'm getting the following error message: Remote Desktop Connection cannot verify the identity of the computer that you want to connect to. Try reconnecting to the Windows-based computer, or contact our administrator. I have downloaded CoRD, and for some reason, that works okay. I can also connect from a Windows 7 running on VMWare Fusion. On Windows 7, I use SonicWall Global VPN Client, and on the Mac, I use VPN tracker, if that is related... What's going on?

    Read the article

  • How to squeeze the maximum performance out of Unity and GNOME 3?

    - by melvincv
    I see that I do not get good performance with the new Unity desktop, but I should say that Unity has improved a lot since the last edition Ubuntu 11.10. How to squeeze the maximum performance out of 1. Unity 2. GNOME 3 My system specs: -Processors- Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz -Memory- Total Memory : 2049996 kB -PCI Devices- Host bridge : Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) PCI bridge : Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode]) VGA compatible controller : Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) PCI bridge : Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) ISA bridge : Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) IDE interface : Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) IDE interface : Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) SMBus : Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Ethernet controller : Intel Corporation PRO/100 VE Network Connection (rev 01)

    Read the article

  • Network trials and tribulations

    - by MauiWowie
    Hi, I am in the process of setting up a small (two PC's, both running Windows 7) network using a D-link DI-604 router (which acts only as hub, it's not set up in any way). In the Network and 'Sharing Center' in 'Control Panel' I clicked 'Set up a New (Connection or) Network'. All went well up until the moment I attempted to connect one PC with the other (in the 'Connect' dialog I entered the other PC's IP, no pwd). I can use both PC's to connect to and browse the net though, so the router/hub does not seem to be the problem. And I must have done something right, because the other computer shows up in the 'Network Map'. Any and all help is much appreciated!

    Read the article

  • Apache does not serve non-locally

    - by yodaj007
    I have a freshly installed instance of Fedora Core 16 inside VirtualBox using bridged networking. On it, as root I typed in: yum -y install httpd service httpd start ifconfig Inside the VM, I can open a web browser to 'localhost' and I get the Apache test page. It works. But in Windows (the machine hosting the VM), I point my browser to the IP address returned by ifconfig (192.168.2.122). The connection times out. I can go to a command prompt and ping the VM. Is there a firewall or something that comes with Fedora by default? Or is there something I need to change in a config file?

    Read the article

  • Is it possible to use WebMatrix with pure IIS?

    - by Mike Christensen
    I'd like to check out WebMatrix for publishing our site to IIS automatically (right now, I have to zip it up, copy it out, Remote Desktop into the server, unzip it, etc). However, every example I can find on how to setup WebMatrix involves Azure, or using a .publishsettings file that you'd get from your hosting provider. I'm curious if I can publish to a normal, every day IIS server running on Windows Server 2008. So far, all I've done to the IIS server is install Web Deploy, which I believe is the protocol that WebMatrix uses to publish. When I enter the Remote Site Settings screen, I select Enter settings. I select Web Deploy as the protocol, type in my NT domain credentials (I'm an Admin on that server). I put in the site URL for the Site Name and Destination URL. When I click Validate Connection, I get: Am I doing something wrong, or is this just not possible to do?

    Read the article

  • Test tomcat for ssl renegotiation vulnerability

    - by Jim
    How can I test if my server is vulnerable for SSL renegotiation? I tried the following (using OpenSSL 0.9.8j-fips 07 Jan 2009: openssl s_client -connect 10.2.10.54:443 I see it connects, it brings the certificate chain, it shows the server certificate, and last: SSL handshake has read 2275 bytes and written 465 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 50B4839724D2A1E7C515EB056FF4C0E57211B1D35253412053534C4A20202020 Session-ID-ctx: Master-Key: 7BC673D771D05599272E120D66477D44A2AF4CC83490CB3FDDCF62CB3FE67ECD051D6A3E9F143AE7C1BA39D0BF3510D4 Key-Arg : None Start Time: 1354008417 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) What does Secure Renegotiation IS supported mean? That SSL renegotiation is allowed? Then I did but did not get an exception or get the certificate again: verify error:num=20:unable to get local issuer certificate verify return:1 verify error:num=27:certificate not trusted verify return:1 verify error:num=21:unable to verify the first certificate verify return:1 HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Type: text/html;charset=ISO-8859-1 Content-Length: 174 Date: Tue, 27 Nov 2012 09:13:14 GMT Connection: close So is the server vulnerable to SSL renegotiation or not?

    Read the article

  • Windows Server 2008 R2 Upgrade via Remote Desktop

    - by Marko
    Is it possible to do an in-place upgrade of Windows Server 2008 R2 to Windows Server 2012 using only Remote Desktop? My plan is to extract WS 2012 installation iso file to C:\WS2012 and run the setup. After restart Remote Desktop connection will be lost, but will it be restored later? Is setup going to automatically install everything, restart, run WS 2012 and start listening for RDP connections? Server is rented and I would like to save the KVM fee. I read here that it's possible to upgrade WS 2008 to WS 2008 R2 like that. Thanks!

    Read the article

  • Unable to access the server via SSH

    - by Rishee
    when I am trying to access the server through ssh it says: ssh: connect to host xx.yyy.zzz.x port 22: Connection refused and on the server in auth.log it shows following log entry: Address xx.yyy.zzz.x maps to xx.yyy.zzz.x.static-pune-vsnl.net.in, but this does not map back to the address - POSSIBLE BREAK-IN ATTEMPT! I have created a user account for that user and it is also in enabled status. Requested info It is Ubuntu 11.10 It is configured as SSH Server using openssh-server I am trying to connect to this server using Putty from Windows 7 i.e. My Desktop I have also asked this on AskUbuntu: http://askubuntu.com/questions/118556/unable-to-access-the-server-via-ssh

    Read the article

  • Logging upload attempt with proftpd

    - by Amit Sonnenschein
    I have a logging server that i use with external hardware, the idea is that a special hardware is uploading logs about it's operation every few hours and from the server i can do whatever i need to do with the information, the old server was getting a bit too old and i've moved to a new one, i've install lamp,proftpd and ssh (just the same as i had on the old server). now for some reason the logs are not being uploaded and i don't know why. the hardware uses a direct ftp access - i've the proftpd.log and saw that the connection is not being rejected (just to make sure i didn't make a mistake with the user/pass) my problem is that for some reason the upload itself is failing... it might be due to wrong path (as it's hard coded in the hardware) but i can't really know as proftpd wont give me any details.. i've tried to change the loglevel to "debug" thinking it would give me more information but i don't see any change... is there any other way i can make sure proftpd logs EVERTHING ?

    Read the article

  • SSRS Errors "Use Local", even though I am

    - by Corey Coogan
    I am at a loss. I posted this on SO, but think this is probably a better place. I have searched high and low and don't know what to do. I am running SQL Server Web Edition on Server 2008, which only supports local databases. I am trying to connect to localhost, but when I test my connection, I get this error. The feature: "The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services. The DB was upgraded from SQL Express and when I select @@version, it says it's Web Edition. I've tried rebooting and that seemed to fix it, but only for a little while.

    Read the article

  • How to query a DHCP server to get the local DNS servers

    - by Dan Berlyoung
    I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

    Read the article

  • How can I simulate a slow machine in a VM?

    - by Nathan Long
    I'm testing an AJAX-heavy web-application. I develop on a new Mac, but I use VmWare Fusion (currently 3.1.2) to test in Windows XP, using IETester to simulate older versions of IE. This lets me see how older IE versions would render the site, but I'd also like to see how the site would perform on an older machine. I see in the VM's settings that I can decrease the RAM; is there a way to also dial down the processor speed? How else might I simulate a slow machine? (I am also going to check out how to simulate a slow internet connection.)

    Read the article

  • Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

    - by sxanness
    I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

    Read the article

  • Localized database for customers

    - by Jim
    The company I work for, has just moved to AWS - and currently they have one very large central database with the instance currently located in America. However, one of their clients has requested that all of their data is held in the EU. So creating an AWS instance in Ireland isn't a problem, the problem is the database and how to manage it. We were considering having another database that runs in the EU for European customers, and use a different primary key step, so that the primary keys will never conflict in case the two locations need to be merged in the future. The problem is, if we have a customer that uses our system in both America, and the EU we would have to create 2 accounts for that user, and reporting across both regions would not be possible as the connection time would be too high. Is there an alternative to set this up?

    Read the article

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Automatic switching between "digital output" (HDMI) and built-in speakers in Vista

    - by Laurence Gonsalves
    We occasionally connect my wife's laptop, which runs Vista, to our TV. Whenever we do this we have to manually switch the default audio output to "digital output" for the sound to go through the HDMI connection, and we also have to restart any apps that we want to send sound to the TV. We then have to perform a similar process when disconnecting. Is there any way to just have this be automatic? It seems absurd to have to do so much manual fiddling when a 40 year old transistor radio is "smart" enough to turn off the speakers and send sound to the headphones when headphones are plugged in. In case it helps, the name "RealTek" shows up in the sound card settings dialog.

    Read the article

  • How do I get a new column from a Sharepoint list into Excel?

    - by Jono
    I've been using Excel to process data from a Sharepoint list for a while now. However, I recently added a column to the Sharepoint table, and when I refresh the data in Excel, I don't get the new column. I perform a lot of calculations based on this data, so creating a new worksheet with the "new" Sharepoint list, moving the calculations and the pivots to THAT sheet is more hassle than I'd like to face. Is there a way to force Excel to display this new column that I've added? Maybe by modifying the connection string?

    Read the article

  • SDcardReader/Writer is not connected

    - by Insuk
    My IOGEAR sdCardReader/Writer is recongized on Ubutu(by using VM ware) but when I tried to connect to "Removable Devices - Alcor Micro Flash Card Reader/Writer" , the follwoing message is appeared. " The connection for the USB device "Alcor Micro Flash Card Reader/Writer" was unsuccessful. The device is currently in use. " But I think it is not used. Should I use IOGEAR driver for this one? When I connect the card reader, Ubuntu automatically got the "Alcor Micro Flash Card Reader/Writer" . How can I fix the problem? Thank you, Insuk the result of lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp. AX88772 Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 005: ID 0403:bcda Future Technology Devices International, Ltd From the vmware log : 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d). 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d).

    Read the article

  • SSL 3.0 warning in Chrome on Ubuntu 10.04LTS

    - by Leopd
    I'm running Apache2 with SSL on Ubuntu 10.04LTS. Chrome gives me this annoying warning when I inspect the certificate: The connection had to be retried using SSL 3.0. This typically means that the server is using very old software and may have other security issues. The relevant part of the apache config looks like: SSLEngine on SSLCertificateFile /etc/ssl/... SSLCertificateKeyFile /etc/ssl/... SSLCACertificateFile /etc/ssl/... SSLProtocol -all +SSLv3 +TLSv1 The last line I added to try to address this problem, but it's not working. Any advice on properly enabling TLS?

    Read the article

  • Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

    - by SnAzBaZ
    I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

    Read the article

< Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525  | Next Page >