Search Results

Search found 18151 results on 727 pages for 'upside down'.

Page 518/727 | < Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525  | Next Page >

• Dell Studio 1555 not starting up

  - by Abhishek

  This is a 3-year-old laptop. I never had a big problem with it until now. I updated Kubuntu the night before yesterday. And Firefox got updated to version 18 and a few other related packages got updated. Then I shut down the laptop and restarted it, but it failed to start. I could hear the fan and the hard disk and the optical disk drive initialize. And the power button also lighted up. But there was no video - no POST or BIOS menu. I even opened the laptop up to the point when only the motherboard was the only thing attached to the base cover. I took it to the technician this evening. He checked it casually, and said that it might be a motherboard problem and will cost quite a bit to fix. Though he was not sure and said that he will give me a call after confirming the problem. Has anyone else had the same problem? What was it and what was the fix?

  Read the article

• Can Current Backflow from Powered Hub's Adapter & cause PC Damage?

  - by SuperUserMan

  Getting this short: Can current flow from a powered USB hub's power adapter (lying 10 Meter away) back to computer via usb port and cause damage to Computer components like mobo, etc? What should be my concerns? Using a 2 Amp 5V Power adapter to power a 10m Long Active Repeater USB extension cable with 4 port HUB & plugging into PC's Front port, causes PC Chassis fan to keep running (thought slower than regular speed) Front Chassis HDD & power LED to turn on (though bit dim) may be other things which i cant detect/see at chip level, in motherboard?? All this even after PC is shut down (bit scary) More detail (in case still want to read): To run 4 High power (needing 450 mAmps) Wifi Adapters, far away from PC, Bought Active Repeater USB Extension Cable with 4 Ports & power port at far end http://www.ebay.com/itm/33FT-USB-2-0-Male-to-Female-Extension-Cable-Hub-Splitter-Adapter-with-4-USB-Port-/390846115254 Then added a locally bought 2 Amp 240V AC to 5V DC Power Adapter and plugged into USB hub which is a part of & situated at far end of a 10 Meter Active Repeater usb extension cable. Even 4 Wifi Adapters run fine (appear to) using this setup, but running chassis fan, dimly lighted Power & HDD LED, even when PC is switched off is bit scary and surely mean 5V & some current is flowing all though that 10 meter extension cable into my USB port & powering stuff. Can this cause damage? and what should be my concerns. Of course I can't switch off the power adapter (lying 10 meters away from PC) every time I switch off my PC to prevent this.

  Read the article

• Access Denied on Some Subfolders/Files Within a Share

  - by Tim

  First thing this morning, I find that users on one of our share drives are all getting "access denied". I tried the same drive and also received "access denied" as a Domain Admin. Previous to this, all specified users and admins could get access. I checked share permissions I checked NTFS permissions I temporarily made both types of permissions read/write to "Everyone" -- This worked for one user It turns out that this is occurring for only some files/folders. When I try to manually alter the share of that single share, it can't be shared, access denied. xcacls also gets access denied rebooted the server (not a big deal - this is a smallish company). Does anybody have any insight, my google-fu is coming up blank. Thanks. EDIT: More info, I just ran AccessEnum. There were a lot of "access denied", but I noticed the pattern that all of the access denied had a parent with an owner of "???". When I look at the properties, the "Unable to display owner" message is in the box and I can only make my user account the owner. I can then share the individual file/folder, but it doesn't seem to propogate down to subfolders/files.

  Read the article

• SQL 2008 SP1 crashing almost daily

  - by matijake

  Hey, almost every day our new DB crashes. It is virtual server residing on same hardware as 5 other servers, two of them beeing identical MS SQL2008sp1 and two Oracle 11g's so I can pretty much rule out hardware issues. Server has dedicated local LUN, 4vCPU and 8GB memory with 2GB windows swap file. It runs 4 instances. Primary instance is limited to 5GB memory and paralelism set to 4 running on MS SQL 2008 SP1 @ Windows Server 2008 Enterprise R2 x64. Only that primary instance is crashing. After it crashes nothing can connect to it, it's even impossible to shut it down through service manager. What I found in logs is: ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\LOG\SQLDump0081.txt SqlDumpExceptionHandler: Process 4788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server i s terminating this process.     Whole log can be seen at: http://kabl.org/files/SQLDump0081.txt second crash log made second later at: http://kabl.org/files/SQLDump0082.txt I have analyzed mini crashdump with Microsoft tools, but no promising results. If it can help, here it is: http://kabl.org/files/SQLDump0081.mdmp Any ideas are greatly welcome, since it is becoming quite a pain in the ass to restart server almost every day :) Regrads, -Matija

  Read the article

• GitLab post-receive hook not firing

  - by Ben Graham

  Apologies if this isn't the right stackexchange. I have a GitLab install. It was installed over the top of a gitolite install that was only a few days old, and I assume this non-standard setup is at the root of my problem, but I cannot pin it down. The problem is straightforward: post-receive hooks are not fired. This prevents 'project activity' appearing in GitLab. The problem looks like: $ git push #... error: cannot run hooks/post-receive: No such file or directory Hook Exists The post-receive hook/symlink exists and is executable: -rwxr-xr-x 1 git git 470 Oct 3 2012 .gitolite/hooks/common/post-receive lrwxrwxrwx 1 git git 45 Oct 3 2012 repositories/project.git/hooks/post-receive -> /home/git/.gitolite/hooks/common/post-receive It's Executable By GitLab The gitlab user can execute the script (I have removed the /dev/null redirect and fed in blank input to get an 'OK' as output): sudo su - gitlab -c /home/git/.gitolite/hooks/common/post-receive OK GitLab Can Find It GitLab is looking for hooks in the correct location: $ grep hooks /srv/gitlab/gitlab/config/gitlab.yml hooks_path: /home/git/.gitolite/hooks/ and $ bundle exec rake gitlab:app:status RAILS_ENV=production # ... /home/git/.gitolite/hooks/common/post-receive exists? ............YES Environment The env -i line in the hook is commonly cited as an issue. I think that would occur after this problem, but for completeness, redis-cli is found OK: $ env -i redis-cli redis> I've run out of debugging ideas on this one. Does anybody have any suggestions?

  Read the article

• Web-based SVG or JavaScript Org Chart or Tree Graph Plotting Visualization API

  - by asoltys

  Hi, I'm looking to build an interactive web-based org chart for a large organization. I somewhat like the interface at ancestry.com where you can hover over people and pan/zoom around and click on different nodes to make them the root. Ideally, I'd like it if people could belong to multiple organizational entities like committees, working groups, etc. In other words the API should support graphs in general, not just trees. I'd like to be able to visually explode each organizational substructure into substituents by clicking on it, with a nice animation of the employees ballooning or spilling out so you can really interactively drill down through the organization. I found http://code.google.com/apis/visualization/documentation/gallery/orgchart.html but it looks a bit rudimentary. I know there are desktop tools like OrgPlus and Visio that can build static charts but I'm really looking for a free, web-based API with open standards-based output like SVG or HTML5 Canvas elements rather than Flash or some proprietary output. Something I can embed into a custom web application and style myself. Something interactive.

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

  - by Chadddada

  I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

  Read the article

• SQL Server Backup modes, and a huge log file

  - by Matt Dawdy

  Okay, I'm not a server administrator, a network guy, or a DBA. I'm merely a programmer helping out a small company. They have IT guy who isn't MS centric (most stuff is on Mac) and he and I are trying to figure out a solution here. We've got 1 main database. We run nightly full backups. I know they are full backups because I can take the latest file, or any of the daily backups, and go to a completely new machine and "restore" the backup to an empty database and our app runs perfectly fine off of this backup. The backups have grown from 60 MB to 250MB over 4 months. When running, then log file is 1.7 GB, and the data file is only 200-300 MB. Yes, recovery model is set to full. So, my question, after all of that, if we are keeping daily backups, and we don't have the need / aren't smart enough to roll the DB back to a certain time, if I change the recovery mode to simple, am I really losing anything? And, if I do change it to simple, will it completely dump the log file or at least reduce it way the hell down? And, will that make our database run faster? I know that it'll make my life easier when I copy a relatively recent backup to my local machine to do development and testing...

  Read the article

• NIC are not advertising Correct Speeds

  - by Squidly

  I have an IBM x336 that is not advertising the proper LINK speeds. One interface is the other is not. I've tried to Force it to 1000/Full but then it just shows link down. I have confirmed the switch is set to auto negotiate like my switches. I have also changed out my Ethernet Cables. I'm at a loss where to look further. I have verified that it will connect at 1G on a different swtich. This also has happened on two different servers on the same switch. This is my output from mii-tool -v for each interface. eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD eth1: negotiated 1000baseT-FD flow-control, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• Setting up a Network Bridge on Linux VM (Windows 7 Host)

  - by GrandAdmiral

  I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

  Read the article

• Disable the user of Internet explorer through policies when called from HTML help

  - by Stephane

  Hello, I have a locked down environment where users are prohibited from doing, well, basically anything but run the specific programs we specify. We just switched a program from using the venerable "WinHELP" help format to HTML help (CHM) but that seem to have an unwanted and rather dangerous side effect: when a user click on a hyperlink inside the HTML help, a new internet explorer window is opened and the user is free to browse and do terrible things to my server (well, not that much, but still...) I have checked the session in this case and the IE window is actually hosted within the help engine: there is no iexplore.exe process running in the user session (and it cannot: it's explicitly prohibited). We have disable all help right now until we find a solution. I'm working with the help team to have all external URLs removed from the help file but that is going to be a long and error-prone task. Meanwhile, I've checked all the group policies option but I have to say that I was unable to find anything that would prevent a standalone IE window hosted in a random process from running. I don't want to disable WinHTTP or the IE rendering engine or anything of the sort. But I need to prevent all users members of a specific AD user group from ever having an IE window displayed to them. The servers are running Windows 2003 and Citrix metaframe 4.5. Thanks in advance

  Read the article

• CentOS Latency High Troubleshooting

  - by Sarah Weinberger

  I have two CentOS servers connected via a 10 Gb fiber optic cable with a network emulator connected between them. All three units sit on a desk in the lab. There is also a regular 1 Gbit Ethernet cable connected to each of the machines, which provide internet connectivity. When I set the latency to something roughly below 30 ms, all is fine. When the latency gets to 70ms and above, and definitely 130ms, the network layer suspends. For instance, if I set the latency (delay) to 70ms, then launching TeamViewer (or any other application that uses network connectivity) never happens or does not work. There is no timeout message, simply no response. I have to lower to latency back down to zero to see any response and have the box start working. What is the problem and how would I go about fixing it? It seems to me some sort of setting in Linux causes one of the CentOS networking drivers to sit in an infinite loop or something. eth0 is the connection to the internet, all settings are default eth2 is the 10 Gbit fiber optic connection to the other computer with the MTU set to 9600 with all other parameters at default values.

  Read the article

• Is there a way in Windows 7 to disable "journaling"?

  - by Psycogeek

  C:\$extend\$Usn.Jrnl:$J:$data Here is a picture finally. The large strip in the center of the top band is the largest chunk, in the other, grey areas are the various clusters with it. On the right, the big long grey line is $logfile (not paging), and it is 63&nbsb;MB. Paging, 500&nbsb;MB is the dark cyan chunk, next to the yellow MFTres in the inner rings.. The disk was defragged so they could be seen easier. Not all clusters of this type of file are tagged, but the idea is there. The disk is 4k clusters, now about 12 GB size. Each cute little block in the picture is .81 MB and represents 207 clusters. The dkGreen section, is mostly the whole Winsxs pile, also interesting when they keep telling us it doesn't take much disk space. Wikipedia suggests that in previous NT systems "USN journaling" would be turned on when enabled (assumes it could also be turned off?). What aspects, services, or program is working on putting that stuff all over the disk which is known by $jrnl$ type clusters, even if it is not actual USN journaling? Is it possible in a Windows 7 system to completly disable the journaling, and what would be the ramifications of that? On a Windows XP NTFS system, I do not recall seeing the quantity of disk clusters used with these $jrnl$ names, so I do not recall this being necessary in this quantity for an NTFS file system itself? I understand that it would not be there, if it did not have a useful function :-) Information about how wonderful is fine, if that information will help track down what parts of the system create and use it. Change Journals states: Change journals are also needed to recover file system indexing Hmm, that might explain some of them, or why it was left on the disk. A crash while background indexing?

  Read the article

• What is auto-mounting my media volume?

  - by user285277

  Something is repeatedly mounting my "media" share, doing something with it, then quietly un-mounting it with no notifications at the user level. from the little I can gleaned from the console messages below, I thought I'd managed to stop it, if not understand it last night when I followed instructions for deleting all traces of the Google Update Daemon. I've not been using any Google apps whatsoever, so I was surprised to see that in Console. What's more surprising, and perhaps a little distressing, is that the same thing occurred this evening, when the Google Daemon is long gone. I don't have that log because I can't recall precisely what time it occurred. I'll do a search and provide it if you wish, though. In the meantime, any help with this would be extremely appreciated. I've asked over at Apple Discussions but I think it might be a little deeper than those manning the boards this weekend are comfortable with. It's certainly beyond my meager skills. With apologies in advance if this is more lines thank you need. Please note that I've transformed the Google links a little because the forum here requires more reputation points before one can post more than two links. 12/27/13 10:47:31.000 PM kernel[0]: memorystatus_thread: idle exiting pid 53629 [distnoted] 12/27/13 10:48:10.433 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 0; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.434 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 1; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.950 PM com.apple.SecurityServer[17]: Session 103257 created 12/27/13 10:48:34.328 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 2; not stale; error: The file doesn’t exist. 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Media Archive-1, pid 53641 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80d6355008 /Volumes/Media Archive-1 (error = 0, retval = 0) 12/27/13 10:49:32.000 PM kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0 12/27/13 10:49:32.000 PM kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving). 12/27/13 10:49:32.000 PM kernel[0]: en0::IO80211Interface::postMessage bssid changed 12/27/13 10:49:33.681 PM configd[16]: network changed: v4(en0-:10.0.1.12) DNS- Proxy- SMB 12/27/13 10:49:33.697 PM configd[16]: network changed: DNS* Proxy 12/27/13 10:49:35.475 PM KernelEventAgent[57]: tid 00000000 received event(s) VQ_NOTRESP (1) 12/27/13 10:49:35.000 PM kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff802176b4a0 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Media Archive-1 prevTrigger 0 currTrigger 1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 600 secs, Connect timeout: 15 secs for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again 12/27/13 10:49:35.479 PM KernelEventAgent[57]: tid 00000000 type 'afpfs', mounted on '/Volumes/Media Archive-1', from '//Me@Capsule._afpovertcp._tcp.local/Media%20Archive', not responding 12/27/13 10:49:35.487 PM KernelEventAgent[57]: tid 00000000 found 1 filesystem(s) with problem(s) 12/27/13 10:49:36.692 PM com.bourgeoisbits.cloak.agent[14503]: NetworkProfile: (null), (null), (null) (Connected: NO, Airport: NO, Open: NO) [trusted] 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 4 seconds and then try again 12/27/13 10:49:41.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=53662[GoogleSoftwareUp] clearing CS_VALID 12/27/13 10:49:42.102 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 2 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:42.113 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone" 12/27/13 10:49:42.116 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s). 12/27/13 10:49:42.121 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x531870 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x5302d0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x534340 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:42.130 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x1a31a90 server=<KSOmahaServer:0x534340> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=1 activeTickets=1 rollCallTickets=1 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:42.292 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:42.296 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:42.299 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 8 seconds and then try again 12/27/13 10:49:43.152 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products. 12/27/13 10:49:43.153 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s). 12/27/13 10:49:43.158 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x18367a0 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x1837e10 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 >, <KSTicket:0x1834750 productID=com.google.talkplugin version=4.7.0.15362 xc=<KSPathExistenceChecker:0x1833890 path=/Library/Application Support/Google/GoogleTalkPlugin.app> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x52e930 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:43.159 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x53a210 server=<KSOmahaServer:0x52e930> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=2 activeTickets=1 rollCallTickets=2 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> <o:app appid="com.google.talkplugin" version="4.7.0.15362" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone, ... (2)) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:43.244 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:43.247 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:43.250 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:45.570 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 1 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again 12/27/13 10:49:53.828 PM KernelEventAgent[57]: tid 00000000 unmounting 1 filesystems 12/27/13 10:49:53.000 PM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Media Archive-1, flags 524288, pid 57 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: get the reconnect token 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: GetReconnectToken failed 32 /Volumes/Media Archive-1 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed 12/27/13 10:50:12.104 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown. 12/27/13 10:50:29.396 PM Dock[93157]: no information back from LS about running process

  Read the article

• Collect temperature and fan speed with munin from Windows 7 PC?

  - by mfn

  Hi, I'm quite fond of munin and using it also at home to monitor my PCs. What was super-duper easy under Linux is pretty much unsolvable for me under Windows: I'd like to monitor CPU and Motherboard temperatures as well as fan speed. On Linux I'm using lm-sensors and the plugin for munin was basically there. I access already some information from my Windows machine via SNMP (disk space, CPU usage, memory usage); the graphs are simple as is the information exposed via SNMP, but they do their job. But when it comes to temperature and fan speed I'm running against a wall. My research so far resulted in that Windows does not by default provide out of the box ability to retrieve temperature/fan speed data. Third party applications are necessary which have know-how how to communicate with the Motherboard chips. The best I cam up with is that SpeedFan exposes a shared memory interface and there exists a library which hooks into Windows SNMP facility and bridges over to SpeedFans shared memory interface; it's called SFSNMP (site currently down). Unfortunately the library doesn't work, there's a bug report at SpeedFan open about it, but it's currently not moving (although the SFSNMP author is active there) . So, unless that's going to work like anytime soon, are there any alternatives? I'm not found of buying any software to get that feature, given that I take it as granted that my system exposes me the information to properly monitor it, but anyway don't just not answer because of this.

  Read the article

• Expired password change through VPN failure

  - by Tim Alexander

  I am setting up some new accounts to be used by some contractors. they are going to connect via VPN to our network. My requirement is to set the password initially and then have them change it the first time they log in. As a result the "User must Change Password" box is checked. Loading up a laptop and testing has yielded poor results. When logging in I get a notification that the password has expired and a box to fill in, which I do. it then appears again so I dutifully fill in the password details again. I am then presented with a "Sending Password...." error box with Error:619 listed as the reason. Trying to reconnect then gives a 691 error that the password is bad. From the firewall, that is the actualy VPN server, I can see RAD_ACCESS_DENIED and from the DC running NPS (acting as a RADIUS server for the firewall with MS-CHAP-v2 enabled with the "User can change password after it has expired" checked) I cannot see a request to change the password. I can only see Event ID 4776, 4625 and 6273 (reason 16). I can log in with out the change password flag fine so I know logins are being authenticated. Really hoping someone might be able to assist in tracking down the lack of password change processin gon the DC.

  Read the article

• Multiple static WAN IP addresses to single LAN subnet

  - by Jessy Houle

  Below is my home network topology. I currently have 5 static IP addresses, 3 of which are in use by 3 routers. These routers in-turn subnet internal networks and port forward. I use my SSL VPN appliance to remote home from work or on the road. At this point I can remotely administer my Windows Server. I know the network is setup wrong, I was matching existing hardware the best I knew how. http://storage.jessyhoule.com.s3.amazonaws.com/network_topology.jpg Ok this said, here is the problem... One of my websites on my Windows Server now needs to be secure (SSL using port 443). However, I'm already port forwarding port 443 to my VPN appliance. Furthermore, if I'm going to have to reconfigure the network, I would really like to be able to use the SSL VPN to remotely administer all machines. I mentioned this to a friend of mine, who said that what I was looking for was a firewall. Explaining that a firewall would take in multiple static (WAN) IP addresses, and still allow all internal devices to be on the same network. So, basically, I could supply my SSL VPN appliance it's very own static (WAN) IP address routing, and yet have it on the same internal network (192.168.1.x) as all my other devices. The first question is... Does this sound right? Secondly, would you suggest anything different? And, finally, what is the cheapest way to do this? I am started down the road of downloading/installing untangle and smoothwall to see if they will do the job, hoping they take multiple static (WAN) IP addresses. Thank you in advance for your answers. -Jessy Houle

  Read the article

• Torrent upload ratio not updated on Synology DS212+

  - by user179271

  I have a Synology DS212+ NAS running DSM 4.2-3211 (current version). I use it for several purposes including torrent download using Download Station and a tracker that needs authentication. My problem is that my download/upload ratio isn't updated, so it constantly falls down. My NAS is behind a router, and I configured the NAT to forward ports 6890 to 6999 to the internal IP address of the NAS. Here are the Download Station settings : TCP port : 6990, Sharing ratio : 900%, Sharing time : infinite, max download speed : 0 (no limit), max upload speed : 0 (no limit), BT protocol encryption : checked, max numbers of peers allowed by torrent file : 4000, DHT : checked, with port 6889. When the DHT option is not checked, the NAS doesn't upload any files. I don't know what is this option for. Can someone help me to solve this problem ? Did I miss any step, or does it come from the NAT ? How is the authentication managed by Dowload Station ? (Sorry for my english) Thanks.

  Read the article

• Is it possible to have a conditional formatting cell "visually cycle" through all the formats that evaluated true?

  - by Ben

  Like the title says, "In Excel, when a cell has multiple conditional formatting rules that evaluate true, is it possible to have the cell "visually cycle" through all the formats that evaluated true? If not, suggestions on what to do would be appreciated!" I'm creating an employee schedule for a business that has multiple job areas that need to have an employee assigned to cover. The schedule is currently set up with the date on the top row, employee list down the left column, and the employee's assigned "job area" cross-referencing with the date on the top row. Originally it was set up where if every required "job area" didn't have someone assigned to it, the date would (via conditional formatting) change to red. I've set it up now that if a condition isn't met, the date will change to the color of the "job area" that doesn't have an employee assigned to it. However, there are cases where multiple job areas don't have an employee assigned, but the date will only change color based on the first condition that isn't met. It'd be nice if there was some way for the date cell to cycle through the different colors that correspond to the job areas where no one is assigned. I have a hunch that's not possible though. If it is possible, I'd love to know how to do it. And if it isn't, if anyone has any suggestions on how I can modify the Excel sheet to make it easier to identify the job areas that don't have anyone assigned to them, I would appreciate it. FYI This schedule goes out months in advance.

  Read the article

• Prevent Exchange Server from advertising itself on domain

  - by Justin Shin

  I'm in the middle of setting up an Exchange 2010 Server. Currently, we use a SaaS provider for Exchange 2007 services. Some (but not all) of my users have been reporting that they are receiving Outlook/Exchange login prompts to login to the new Exchange server. This is happening without any intervention on the client's machines. The Exchange server is a member of the domain and connects to the domain site remotely through a site-to-site VPN. What can I do to prevent these login prompts from appearing? Will shutting down the new server until it is time to switch resolve these issues? A little more info: I found that on one of the client computers, all of the settings for Outlook over HTTP had been changed (automatically) from webmail.provider.com to mail.company.com (the latter being the new server). This happened when I enabled Outlook Anywhere access on Exchange 2010. I changed the client's settings back, and everything was groovy. But, when I disabled Outlook Anywhere again, the logon prompt came back.

  Read the article

• Webserver max CPU when apache and MYSQL are ran together

  - by Tim

  This website has been running fine without issues, Recently it went down. After some investigation it looks like the combo of MYSQL and Apache bring the box to its knees. Apache can run find serving static web pages and MYSQL can run fine when the website isn't working. As soon as the website is enabled with SQL running the CPU on the box remains at 100%. Picture of the usage: http://i.stack.imgur.com/GG2NC.png I've checked the sql database for errors, tried tuning nearly every parameter in apache/sql's conf file for performance. The server is a redhat based box running the latest software packages. Any help/suggestions are welcome. Doing an strace on a high cpu apache process I see the following: read(14, "", 8192) = 0 close(14) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 14 fcntl64(14, F_SETFL, O_RDONLY) = 0 fcntl64(14, F_GETFL) = 0x2 (flags O_RDWR) connect(14, {sa_family=AF_FILE, path="/var/lib/mysql/mysql.sock"...}, 110) = 0 setsockopt(14, SOL_SOCKET, SO_RCVTIMEO, "\2003\341\1\0\0\0\0", 8) = 0 setsockopt(14, SOL_SOCKET, SO_SNDTIMEO, "\2003\341\1\0\0\0\0", 8) = 0 setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) setsockopt(14, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 Here is what I see from a mysql process: futex(0x86fc9a4, FUTEX_WAIT_PRIVATE, 39, NULL) = 0 futex(0x86fc734, FUTEX_WAIT_PRIVATE, 2, NULL) = 0 futex(0x86fc734, FUTEX_WAKE_PRIVATE, 1) = 0 gettimeofday({1301465020, 141613}, NULL) = 0 clock_gettime(CLOCK_REALTIME, {1301465020, 141699633}) = 0 futex(0x8707a64, FUTEX_WAIT_PRIVATE, 1, {4, 999913367}) = 0 futex(0x8707a40, FUTEX_WAIT_PRIVATE, 2, NULL) = 0 futex(0x8707a40, FUTEX_WAKE_PRIVATE, 1) = 0 exit_group(0) = ?

  Read the article

• Lenovo S10 Ideapad will not boot while original hard drive is installed, neither from hard drive or

  - by aki

  Hello, first time posting here so I'll try to be very clear. I have a Lenovo S10 Ideapad netbook which fails to boot to an OS. It shows the Lenovo splash screen and can get to the BIOS but it doesn't get to GRUB (was dual booting Ubuntu 9.10 and Win 7, was working fine for months, ie this isn't a new dual boot gone bad). After the splash screen it displays a flashing cursor in the upper left corner. Power cycled to no avail. Here is what I have done trying to narrow the problem down: The machine will boot to Ubuntu using an install/live USB drive, but only if ANOTHER hard drive is installed or NO hard drive is installed. The boot order always lists USB first. Also, there is a 2 gb RAM upgrade but I think that's fine; the Ubuntu USB drive boots fine with it, and "free" sees the whole 2gb of memory. So it seems like the hard drive is bad. I was able to put the bad drive in a different laptop and mount it to recover files. I'm ready to replace the bad hard drive, but I would like to know if this situation makes any sense. If the hard drive is bad, shouldn't I still be able to boot with the Ubuntu USB drive while the bad drive is installed? I would have expected the machine to boot into Ubuntu anyway even if with a bad drive, since the boot order lists USB first. But it seems that when the bad drive is installed, the machine ignores the USB drive and hangs with the flashing cursor. Thanks for any ideas! Sorry for the long post, I just want to put all the info I have up front! Basically I'm going to buy a new drive, but I am mostly curious if this is a typical or at least not unusual situation.

  Read the article

• Office 2010 Trusted Locations not working after restart

  - by Josh King

  In Excel 2010, on Windows XP, I am unable to open files - through the open dialog box - from a network drive. The sever has already been added to the Trusted Locations and now most security settings turned down or off. Excel will show "Downloading ..." on that status bar and a progress bar which doesn't progress. We have left Excel sitting in this state for 30+ minutes and no change. A similar problem occurs when saving files to network shares. If we use explorer to navigate to the files and double click them they open flawlessly. No add-ins are active. We also have this problem in Word 2010, but the server was not initially in the Trusted Locations. I added it and it worked until the PC was reset, it now exhibits the same issues as Excel where the server is in the Trusted locations but will not open files. I have tried removing the server from the Trusted Location in both applications, restarting the PC and re-adding them (testing before, after and in-between) and had no luck.

  Read the article

• Logging into Local Statusnet instance on Apache causes browser to download a file

  - by DilbertDave

  I've installed statusnet 0.9.1 on a Windows Server via the WAMP stack and on the whole it seems to be fine. However, when logging in using IE7 or Chrome the browers invoke a file download, i.e. the File Download dialog is displayed. In IE7 the file is called notice with the content below (some parts starred out): <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/"> <ShortName>Mumble Notice Search</ShortName> <Contact>david.carson@*****.com</Contact> <Url type="text/html" method="get" template="http://voice.*****.com/mumble/search/notice?q={searchTerms}"></Url> <Image height="16" width="16" type="image/vnd.microsoft.icon">http://voice.*****.com/mumble/favicon.ico</Image> <Image height="50" width="50" type="image/png">http://voice.******.com/mumble/theme/cloudy/logo.png</Image> <AdultContent>false</AdultContent> <Language>en_GB</Language> <OutputEncoding>UTF-8</OutputEncoding> <InputEncoding>UTF-8</InputEncoding> </OpenSearchDescription> In Chrome (Linux and Windows!) the file is called people and contains similar XML. This is not an issue when logging in using FireFox. This is obviously a configuration issue but I'm not having much luck tracking it down. I tested the previous version of Statusnet on an Ubuntu Server VM on our network and it worked fine for months. Thanks In Advance

  Read the article

< Previous Page | 514 515 516 517 518 519 520 521 522 523 524 525  | Next Page >