Search Results

Search found 21454 results on 859 pages for 'via lactea'.

Page 519/859 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

• Can't ping my computer - "Transmit failed. General failure."

  - by Vaccano

  I am having an issue with my computer. My IIS services are not working. I have narrowed it down to the fact that my computer cannot find itself via its name. I try pinging my computer by its name and I get this: C:\Users\18773ping MyComputerNameHere Pinging MyComputerNameHere [::1] with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for ::1: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), I tried having someone else ping my machine and it works fine for them. Any ideas?

  Read the article

• I don't have a free PCI / PCI-e slot, can it be worked around?

  - by Borek

  I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

  Read the article

• Setup a local file server for two networks

  - by rzlines

  Hi I would like to setup a local linux file server (using centos and samba) that can be accessed by two independent local networks in the same house. I have 2 networks on the same floor which have Windows 7 computers, but the networks are split as we have 2 internet connections. How do I go about this? Additional info: Currently both the networks use DropBox to send files to each other but that happens via the Internet and hence its slow. Would like to achieve the same locally to increase the speed.

  Read the article

• How to remove GRUB from dual boot (Debian and Windows XP)

  - by All

  I have a computer witch cannot be boot from CD or USB. I have Debian and Windows XP with dual boot via GRUB. Now I want to uninstall Debian and GRUB and restore the Windows MBR. I can enter boot Debian and Windows OSes, but no boot from CD or USB for recovery. How can I remove GRUb and restore MBR from within Windows XP or Debian? NOTE: I asked this question before, but after accepting the answer, I found that Windows XP does not have fdisk command. However, I think it is too late to continue the discussion there; thus, I asked this brand new question.

  Read the article

• Temporarily disable window snapping in xfce4

  - by icyrock.com

  I'm using Xubuntu 12.04 and I can move windows by pressing Alt and then dragging a window. I have window snapping enabled via xfce4-settings-manager (Window Manager / Advanced tab / Snap windows to screen border). I like the snapping feature in general, however sometimes it gets in the way. Is there a way to temporarily disable snapping while doing this? Obviously I can open the settings manager, disable, move, enable, but I'm looking for a less intrusive solution, especially if there's something built in already (e.g. pressing Shift in addition to Alt to disable snapping or something along these lines) or a plugin of some sorts.

  Read the article

• How do you host images using Windows Server so that they are accessible over the internet? [closed]

  - by nairware

  I was trying to figure out a way to host images (picture images, not disk images) such that they are accessible over the internet via URLs--in a way similar to a web service like Photobucket or ImageShack. I have a whole bunch of Windows Servers (Windows Server 2008 R2) available in the cloud. Instead of hosting images using Photobucket or ImageShack, I wanted to host this images directly on my own Windows cloud. This could be really complicated or really simple. I have no idea, as I know very little about IIS 6 (which is what I am using) or web servers. If this is too broad of a question (as there are probably multiple ways of implementing this), is there at least some guide or documentation of how someone else has setup image hosting? Perhaps a step-by-step guide of at least one way to do it?

  Read the article

• trying to upgrade memory

  - by user214876

  I've been using Ubuntu on my laptop for awhile now. Not quite used to it yet. I've got a Acer Aspire with an orig 4 gig mem/500 gig HDD. Running 12.04 presently 32 bit sys. I have the 13.04 upgrade disc and want to upgrade my memory to 8 Gig. Everytime I install the 8 gig memory, the system won't boot to either version. I downloaded the 64 bit version of both versions of Ubuntu but no results yet. Can anyone offer a suggestion here? I'm kinda lost. Additional Information: The memory was purchased through Acer/Kingston. Recommended for this computer. I watched the video on installing it, so I doubt it's installed wrong. (There's only one way of putting it in). I swapped Op Sys, from Ubuntu 12.04 to 13.04 to 13.10 and now to Xubuntu 13.10 64 bit version. I'm still not having any luck with this upgrade. Would it be necessary to upgrade the CPU? It's just a thought, I don't know what else could keep me from utilizing the new memory. Additional Information: Called Kingston this afternoon, they are sending replacement lower density memory modules 2/4 gig - 8 gig. Tech service says I need to upgrade BIOS to utilize new memory install VIA Dos since it is no longer a windows system. I'm not sure how to go about that but it's a learning process I can live with. Thank you all for your help/support. I realize this isn't a Ubuntu problem but each new user of this op sys, seems to share simular problems and maybe someone can use this info to their advantage.

  Read the article

• How to setup dns to redirect app.example.com to another ip?

  - by AZ.

  I have a site www.example.com running on a hosting company. Now I want to create a separate web app on my VPS and let it accessible via app.example.com How can I set the DNS to redirect app.example.com to my VPS' ip address? CNAME or A Record? Also, If I want to do a mail server on my VPS too, how to setup the DNS? EDIT: Existing site: www.example.com Location: some hosting company that I don't control. It's running PHP with nginx I guess (or aphache) New site (that I'm working on): app.example.com Location: my VPS, it has an IP address, the VPS is running nodejs. It can run along with nginx but currently it's not. I want the existing website continue working (as customer visit www.example.com) and I want customer to visit app.example.com for some new features. The two websites are NOT on the same server and not using the same IP address.

  Read the article

• Why my Firefox displays XML files as blank pages?

  - by n1313

  Every time I open an XML file, all I get is blank page instead of tag tree. The file itself is correct and loads okay, I can see it via View Source or in the Firebug. I've tried turning off all my addons, but the problem was not solved. All other browsers (Chrome, Opera) render the same file as an XML tree. I'm guessing that I've messed up my configuration somehow and Firefox now tries to render XML files as HTML ones. I've tried googling, but with no success. Help, please?

  Read the article

• Change Google Chrome's Process model?

  - by mobius42

  See here: http://imgur.com/lKffI.png Does anyone here know how to stop Chrome doing this? Chrome seems to group all tabs I open through the same page into one process. If I copy and paste the links individually into separate tabs, it creates new processes, but when I just middle click links, it groups them into one. I want to force Chrome to create a new process for every tab because when one page locks up, it freezes pretty much all the tabs I have open and if one of the tabs crashes, it takes the rest with it. You can apparently alter Chrome's process model to one called "--process-per-tab" which seems to be what I'm looking for, but when I try and open Chrome with this argument via the terminal, it doesn't work. It's likely I'm not using the correct command; what I tried was: /Applications/"Google Chrome.app"/Contents/MacOS/"Google Chrome" --process-per-tab I'm on OSX and using the latest dev build 5.0.396.0.

  Read the article

• Precise exposition of an image for set number of frames (Vsync?)

  - by Istrebitel

  I need to make a simple enough program in C#, but it seems to be impossible via usual WinForms means. I need to show something (a string of text, an image) on the screen for very small time interval. Since typical monitors are 60Hz, this interval would be 1 or 2 frames (16,6 or 33,3 ms). I tried doing this with usual WinForms, and it is not possible because, apparently, there is no way to know how many frames were output to the monitor since some point in time. I can only draw on the controls, and monitor output is totally independant. So even if I run the timer, say, for 17 ms, between showing and hiding the image, it still sometimes manages not to draw a single frame of my image on the screen (even though theoretically it should, because 17ms 16,6ms). Moreover, even 20ms seems to slow (even though i should be more than enough). I did some game development as a hobby in the past (Delphi X, XNA) and I know that you usually draw the whole screen by yourself, each frame. Also, I know that there is an option called Vsync in most modern games, that allows you to synchronize your framerate to your monitor's frame rate. So, is it possible? I mean, to actually know how many frames were sent to the monitor with w/e I want to show?

  Read the article

• Opening a port to make a connection in Windows 7 [closed]

  - by jannes braet

  Possible Duplicate: trouble with opening a port to make a connection I have watched a video on how to open my ports in Windows 7. I followed the example by going to my "firewall" in "advanced settings" and I made new rules in "inbound rules" and in "outbound rules". I chose to allow connections to all ports, but if I try it with canyouseeme, then it says I can't find the configured port. Maybe it is because the site is wrong, but I don't really believe so. Could someone tell me how I open my ports so that I can connect to them and others to connect to them via the internet (if they have my ip-adress of course)?

  Read the article

• can power supply affect I/O

  - by user101289

  I have a dev server machine running Ubuntu 12.04. For a long while it's been throwing intermittent errors where it would suddenly tell me "File system is read only" or drop into a GRUB error console on boot. I've done disk checks, bad blocks, etc. and no real problems with the main SATA drive were detected. Finally the drive would not be detected at all-- but neither would other drives I plugged in (via SATA). I plugged the supposedly "bad" drive into another server and it worked fine, no issues, for days-- so I assumed the motherboard had a bad SATA controller, and replaced the motherboard with an identical model. I replaced the drive into the original machine with the new motherboard, rebooted-- and the same issues-- I/O errors, failure to read the drive at all, dropping into GRUB, etc. I'm wondering if there could be some other issue with this machine, that's not related to the drive-- possibly power supply? Thanks for ideas

  Read the article

• How to redirect / route VPN traffic to back standing local network?

  - by Milkywayfarer

  There are two computers one "HOME" with Ubuntu 10.10 installed, and another "WORK" with WinXP installed. WORK PC is behind draconian firewall. However, let's imagine, that there is VPN connection installed between this 2 work stations, for example, with teamviewer, hamachi, openvpn, or by some other mean (by the way, what is the best mean for such purposes?). One is interested in working with WORK's LAN resources from his HOME computer via VPN. So my question is about configuration required to be done on WinXP machine (or, maybe on both machines), to make such interaction possible? I'm guessing that some routing stuff should be performed somewhere. But I don't know what exactly and how to do?

  Read the article

• WUBI installation wiped hard-drive?

  - by gkaykck

  Here is what happened, i ve installed xubuntu via wubi on my D: drive. I have 2 drives by the way C: and D: Basically i use C: drive for windows and D drive for rest and backup as everybody does. And i installed my WUBI installation on drive D: too. Than i tried to do a little extreme thing. Which is basically i tried to make a shortcut to D: folder within Xubuntu. The problem is suddenly all my files disappeared. Folders stayed same, but files disappeared. Also the drive have the files, i know because it is still full, but the thing is i cannot see any of my files. I tried checking for errors and some basic data recovery which didn't worked at all Any help?

  Read the article

• accessing external mysql server through "ssh tunnel" - any drawbacks?

  - by Max

  In an upcoming project I have a two server setup: one is the application server and another, already existing runs the mysql server with databases I need to access. I contacted the server admin of the mysql server and the only way I can access the remote mysql databases is via "SSH tunnel". I have never done this before and never heard of it so far, so my question, are there any drawbacks, e. g. performance wise? Isnt it rather slow compared to directly accessing the mysql server on its default port?

  Read the article

• iPhone 3GS Contacts 'Sometimes' Won't Sync Back to Exchange

  - by marcusstarnes

  I don't know if anyone else has experienced this so just thought I'd find out if it's a known issue or if it's just happening to me. since I first got my 3GS, I've had it synced with Micorsoft Exchange (initially 2003, now 2008). If I go into my contacts on the phone and add a new contact it immediately syncs back at my Exchange server and vice versa. However, sometimes if I add a contact via one of the 'quick links' (Like if I get a text from someone not already in my Contacts on the phone, then use the facility to create a contact for this number), while the contact is visible on the iPhone, it 'never' makes it to the Exchange server. Does this happen to anyone else?

  Read the article

• How can I forward certain emails based on header information with Postfix?

  - by Jason Novinger

  We receive service requests via a particular email. The request is then forwarded to other addresses, using an entry in virtual_alias_maps. Upon seeing the word "EMERGENCY" in the subject line of a request to this email, I would also like to forward this to another address (an alias of our administrator's SMS email addresses). I think I can accomplish this with header checks and the REDIRECT command. However, REDIRECT only sends it to the redirected address, not the forwarded addresses. In the case of "EMERGENCY" I would like it to go to the redirect address and the original forwarded addresses. I am fairly new to Postfix and I feel like I am missing something here. Any suggestions?

  Read the article

• hosting website on a private network

  - by razor

  i'm currently running a website off 3 linux servers. I'd like to setup a private network and only allow port 80 traffic to one of the servers. I'd also like to setup a vpn so only I can access the servers via ssh or any port for developing/debugging. How hard is this to setup and what do I need to get? Do enterprise/commercial routers have vpn functionality built in? how do I handle DNS? eg- www.mydomain.com would need to point to the router, which forwards traffic to the webserver. Do I set the A record to the router, and somehow tell the router which server to send the http request to? And how would I make server1.mydomain.com resolve to server1 within the private network (without editing host files)? Would I need to run my own DNS (eg- powerdns?) to do this?

  Read the article

• Find an old static IP address on a mac backup?

  - by Joe

  I have an old backup of a mac via time machine, and I was wondering if there is some sort of accessible file that would have the static IP of the old computer it was backed up from. If you are curious, I am in IT and it is a PITA to get a new static IP here. I am just trying to use the old one to save some hassle. I've tried searching through the system log with no success (but I might be doing it wrong- grep with a regexp for an IP). Thanks!

  Read the article

• Network randomly drops

  - by user147661

  I have a VPS, ubuntu server 12.04 and for unknown reasons the network connection drops and I have to access my vps via the console and ifdown eth0 and ifup eth0. This brings the connection back up from about a few seconds to a few hours. I have run tail -F /var/log/syslog to monitor the log to see what happens at the point of drop and there is nothing unusual. The vps is running under virt-manager and the hardware is set to virtio. I have had linux friends look at my vps and they are unsure of what is the cause.

  Read the article

• Do any of the HP printers have implement printer sharing?

  - by BCS

  I've seen several (home grade) HP prints that have network port and allow connecting to them via that. However I haven't seen any way to use it without installing the printer specific drives. This seems a bit silly because I've seen printer sharing system (SMB I think) that didn't seem to need any printer specific software. My question is: Is there a way to use one of these with my printers? (I'm omitting the exact model in the hopes that answers for several models (or a resource that answers it for several models) will be given.)

  Read the article

• Internet Connectivity... Help please!

  - by James

  Hi. My Laptop is having trouble connecting to my wireless router. Other laptops are using the wireless, but it's not reached capacity. The laptop recognises (with a strong signal) that there is wireless internet, and I can connect via the router with a cable because this happens automatically. My problem is this... When I click "connect" (for example in the network and sharing centre), the dialogue box closes and nothing else happens - as though "connect" is being read as "exit". I am running Vista on a Toshiba Satellite Pro P300. Any help would be very much appreciated, Thanks

  Read the article

• Is it normal for GRUB to take some time (15+s) after I choose what to boot?

  - by zarnaik

  I had been planning to change the background of my bootloader for a while, and finally got to it. Now the black screen I get for quite some time was made clear. It is still GRUB, because the background image stays, while all of the text is gone. Then it just simply shows the Lubuntu loading screen for, usually, not more than 3 seconds. I run Lubuntu 12.10. My question is, is this normal behaviour or is something going wrong, causing GRUB to take longer? Here are the contents of my grub file located at /etc/default/ : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_BACKGROUND="/usr/share/lubuntu/wallpapers/1210-Windmill_by_Ferran_Reyes.png" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" If you need any other information please tell me and I'll do my best to provide it. :)

  Read the article

• Installing XAMPP on a live server [on hold]

  - by Eeeearth

  I am trying to get phpMyAdmin on my live server so I can do database programming on a live server rather than a local one. I have 2 servers at the moment, one through 1&1 which is a Windows Server 2008 and through RAM-Host which is running CentOS. I am just trying to figure out what I need to do to install XAMPP on the LIVE server, as opposed to accessing through localhost, for obvious reasons. Do I install XAMPP the same way I did on my local, but on my server? Essentially I would like to access the phpmyadmin via: mydomain.com/phpmyadmin, just as I would locally using localhost/phpmyadmin. Again, sorry for any ignorance here I just can not find any information on what to do for this.

  Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >