Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 520/670 | < Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >

• Backup data rate on Raspberry Pi maxing out at 5 Mb/s. Why?

  - by bastibe

  I set up my Raspberry Pi as a Time Machine, as documented here. At the moment, the Raspberry Pi is connected to my MacBook Pro using a direct Ethernet cable. Also, an external hard drive (laptop drive) is connected to the Raspberry Pi using the USB port. However, backups are pretty slow. Activity Monitor claims that the Network is transferring a very steady 5 Mb/s, where my Time Capsule is transferring up to 8 Mb/s with a lot of fluctuation. The Raspberry Pi self-reports (top) that its CPU is only half-used, with about equal parts afpd, usb-storage and jbd2/sda1-8. Thus, I think that the processing power of the Raspberry Pi does not seem to be the problem here. To me, this looks like there is some kind of bottleneck that maxes out at 5 Mb/s thus potentially having my backups run at less than their potential speed. To the best of my knowledge, this might be the afp-daemon, the usb-bus or the external hard drive. So, my question is, how could I identify the true culprit and what can I do about it?

  Read the article

• OpenVPN bad source address from client

  - by Bogdan

  I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

  Read the article

• Improving IO with FlashCache

  - by Devator

  I have a server with 2 HDD's (2x 1 TB), running in RAID 1 (SW-RAID). I want to improve IO performance by using flashcache. There are running KVM virtual machines on it, using LVM. Regarding this, I have the following questions: Will this even work? flashcache works for block devices, however these are all virtual machines with their own setup. How much would I expect to increase performance? Most virtual machines run websites and some host games. How big does the SSD needs to be? Would having a bigger SSD increase performance since it's able to cache more files? What happens if the SSD dies? Would flashcache retrieve files from the traditional HDD and I could simply replace the SSD? How much faster would writeback be in comparison with writethrough and writearound? I have no access to a test system unfortunately, so could I install flashcache on a live server without unmounting the the disks? I found a great tutorial here which I would be using.

  Read the article

• Flushing iptables broke my pipe, how can I save my instance?

  - by Niels

  I was setting up my iptables when I performed a iptables -F and my ssh pipe broke. This is the last output of my session: root@alfapaints:~# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW,ESTABLISHED tcp dpt:2222 ACCEPT tcp -- li465-68.members.linode.com anywhere state NEW,ESTABLISHED tcp dpt:nrpe ACCEPT tcp -- anywhere anywhere tcp dpt:9200 state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http state NEW,ESTABLISHED ACCEPT udp -- anywhere anywhere udp spt:domain Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:2222 ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:nrpe ACCEPT tcp -- anywhere anywhere tcp spt:9200 state ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spt:http state ESTABLISHED ACCEPT udp -- anywhere anywhere udp dpt:domain root@alfapaints:~# iptables -F Write failed: Broken pipe I tested my connection just before and I was able to connect with ssh. Now I did a nmap scan and not a single port is open anymore. I know my VPS is running on VMWare ESXi, could a reboot help? Or if not could I attach and mount the disk to another vm to save the data? Does anybody have some advise? And maybe an explanation what happend or what could have cause my pipe to break? ps: I didn't save my rules on the config directories of iptables. But used a file I stored in ~/rules.config to apply my rules like this: iptables-restore < rules.config So probably a reboot would help? Thanks a lot in advance.

  Read the article

• How to restore broken Ethernet functionality on Mac G5 running Mac OS 10.4.11 (Tiger)

  - by willc2

  I had a disk error that rendered my Mac unbootable. I repaired it with Tech Tool 4, but now networking does not work. Network Preferences reports that my Ethernet cable is unplugged. I know this is bogus because when I boot from an emergency partition, networking works correctly. Furthermore, wireless networking is also broken, which I tested with a known-good Wi-Fi dongle. Whenever I try to change Network Port Configurations by creating a New or Renaming an existing one, example: I get this message in the console: Error - PortScanner - setDevice, device == nil! Error - PortScanner - setDevice, device == nil! In sets of two as shown. When I try to invoke the Network Diagnostics app, it immediately crashes. My first thought is to reinstall Tiger with the Archive and Install method so I don't have to reinstall all my applications but I have lost my Tiger installer disk. My next thought is to buy Leopard for $107 on Amazon. If there is any way I can just repair my Tiger install I would be happy to save that money, though. This is not my main machine and I am loathe to put more money into it. How can I recover my network functionality? UPDATE: I found my Tiger install disk and tried an Archive and Install. It failed with an unhelpful error message along the lines of "Can't install, try again". I tried again but had the same error. My guess is, some corrupt or missing file in my User folder is preventing migration. I have a backup created with Super Duper that is a bit out of date but will startup the machine (with functional networking). I would love to just copy over the file(s) that got messed up but I don't even know where to look. What is the likely location of the System files that would cause the aforementioned symptoms?

  Read the article

• Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

  - by david

  I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

  Read the article

• VNC error: "Could not connect to session bus: Failed to connect to socket"

  - by GJ

  I started a vncserver on display :1 on an ubuntu machine. When I connect to it, I get a grey X window with an error message Could not connect to session bus: Failed to connect to socket. The vnc log is: Xvnc Free Edition 4.1.1 - built Apr 9 2010 15:59:33 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Underlying X server release 40300000, The XFree86 Project, Inc Sun Mar 20 15:33:59 2011 vncext: VNC extension running! vncext: Listening for VNC connections on port 5901 vncext: created VNC server for screen 0 error opening security policy file /etc/X11/xserver/SecurityPolicy Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/misc/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/75dpi/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/, removing from list! cat: /var/run/gdm/auth-for-link2-eGnVvf/database: No such file or directory gnome-session[24880]: WARNING: Could not make bus activated clients aware of DISPLAY=:1.0 environment variable: Failed to connect to socket /tmp/dbus-FhdHHIq8jt: Connection refused gnome-session[24880]: WARNING: Could not make bus activated clients aware of GNOME_DESKTOP_SESSION_ID=this-is-deprecated environment variable: Failed to connect to socket /tmp/dbus-FhdHHIq8jt: Connection refused gnome-session[24880]: WARNING: Could not make bus activated clients aware of SESSION_MANAGER=local/dell:@/tmp/.ICE-unix/24880,unix/dell:/tmp/.ICE-unix/24880 environment variable: Failed to connect to socket /tmp/dbus-FhdHHIq8jt: Connection refused Sun Mar 20 15:34:10 2011 Connections: accepted: 0.0.0.0::51620 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type VncAuth(2) VNCSConnST: Server default pixel format depth 16 (16bpp) little-endian rgb565 VNCSConnST: Client pixel format depth 16 (16bpp) little-endian rgb565 gnome-session[24880]: Gtk-CRITICAL: gtk_main_quit: assertion `main_loops != NULL' failed gnome-session[24880]: CRITICAL: dbus_g_proxy_new_for_name: assertion `connection != NULL' failed Any ideas how to fix it?

  Read the article

• New AD-DC in a new Site is refusing cross-site IPv4 connections

  - by sysadmin1138

  We just added a new Server 2008 (sp2) Domain Controller in a new Site, our first such config. It's over a VPN gateway WAN (10Mbit). Unfortunately it is displaying a strange network symptom. Connections to the SMB ports (TCP/139 and TCP/445) are being actively refused... if the connection is coming in on pure IPv4. If the incoming connection is coming by way of the 6to4 tunnel those connections establish and work just fine. It isn't the Firewall, since this behavior can be replicated with the firewall turned off. Also, it's actually issuing RST packets to connection attempts; something that only happens with a Windows Firewall if there is a service behind a port and the service itself denies access. I doubt it's some firewall device on the wire, since the server this one replaced was running Samba and access to it from our main network functioned just fine. I'm thinking it might have something to do with the Subnet lists in AD Sites & Services, but I'm not sure. We haven't put any IPv6 addresses in there, just v4, and it's the v4 connections that are being denied. Unfortunately, I can't figure this out. We need to be able to talk to this DC from the main campus. Is there some kind of site-based SMB-level filtering going on? I can talk to the DC's on campus just fine, but that's over that v6 tunnel. I don't have access to a regular machine on that remote subnet, which limits my ability to test.

  Read the article

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• IP address from a MAC address

  - by acermate433s

  I'm writing a class to integrate a POS card reader device to our software. In order for it to work I must know what IP it's using. We were given some sample code by the service provider and the way they do this is they open a website (http://www.ebizchargeemv.com/getip.php?mac={MAC address of device}) and it would return the IP address of the device. The device I'm using is a POSLynx220 Mini. It has an ethernet port that connects to the internet to communicate with the service provider. I send TCP data to it and the device then controls a PIN pad that prompts a client to swipe his card. It's probably a mini computer that communicates with the service provider and uses the PIN pad as its input device. Just being curious but how did they implement this? Are they implementing it using ARP? I'm planning on not using their website to determine the IP of the device. I've seen some code that uses ARP but using executing ARP in one of the PC didn't detect the POS device.

  Read the article

• replica set with multiple primary nodes

  - by miguel

  I am trying to configure a replica set with three nodes: node A, B and C. I execute the rs.add()'s from node A and after that rs.status() shows that the three nodes are PRIMARY. Moreover node B and C have 0 pingMs. If I execute rs.status() from node B or C the only node listed is the self (As PRIMARY). I tried adding an arbiter but it didn't work (it behaved as the nodes B and C). I think this can be a networking problem but I can't figure it out. Edit: This is the output for netstat -anp|grep 27017: tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN - tcp 0 0 10.0.1.211:55772 10.0.1.213:27017 TIME_WAIT - tcp 0 0 127.0.0.1:50509 127.0.0.1:27017 ESTABLISHED - tcp 0 0 127.0.0.1:27017 127.0.0.1:50509 ESTABLISHED - tcp 0 0 10.0.1.211:55774 10.0.1.213:27017 TIME_WAIT - tcp 0 0 10.0.1.211:55776 10.0.1.213:27017 ESTABLISHED - tcp 0 0 10.0.1.211:39180 10.0.1.212:27017 ESTABLISHED - tcp 0 0 10.0.1.211:39178 10.0.1.212:27017 TIME_WAIT - tcp 0 0 10.0.1.211:39176 10.0.1.212:27017 TIME_WAIT - unix 2 [ ACC ] STREAM LISTENING 3291267 - /tmp/mongodb-27017.sock the private ips for the node B and C are 10.0.1.212 and 10.0.1.213 respectively (they appear to have an established connection in the 27017 port according to the netstat output).

  Read the article

• fedora apache/nginx pylons

  - by microchasm

  I'm trying to wrap my head around Pylons and how it works. So far... it's been confusing... I'm using EC2 with Fedora8. Everything is working so far (i.e. I have Pylons/python et al installed and after creating a test app and running paster serve I can access the default page via my domain name). As the Pylons docs explain and as I understand, the built in paster serve server is not suited for a production environment. What I am not clear on, then, is what to do next... It seems like nginx is a good option, but I am more familiar with Apache (like .0002%). I plan on having virtualhosts (which nginx says can accomodate). However, I am totally unclear on how the big picture is supposed to work. In order to serve an app, does paster serve need to be running? Does then nginx/apache basically just act as a proxy to shuttle connections to the paster server? How do I start it so it doesn't terminate after closing the ssh connection? If running multiple apps, what do I set as the host/port in development.ini to differentiate the apps? Or if this is not the right way, how do I differentiate beween apps? I am more familiar with MySQL, but willing to negotiate PostgreSQL if it's a better fit. Is it? Is virtualenv a prerequisite to running multiple apps on the same machine? Thanks in advance for any tips.

  Read the article

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• Regarding traffic shaping on juniper SRX550

  - by peilin

  We have implemented the Juniper SRX550 in our company. Now we have one issue that how to restrict the internal user download speed from internet. Take one example that i want to restrict the end user with IP:192.168.1.20/32 downloading speed up to 1M via my external port ge-0/0/6.0. Below is my setting: [edit firewall policer p1M] root@SRX550# show if-exceeding { bandwidth-limit 1m; burst-size-limit 15k; } then discard; [edit firewall family inet] root@SRX550# show filter limit-user term 10 { from { destination-address { 192.168.1.20/32; } } then policer p1M; } term else { then accept; } [edit interfaces ge-0/0/6] root@SRX550# show per-unit-scheduler; unit 0 { family inet { filter { input limit-user; } address Hidden Here; } } As per the setting, the end user downloading speed should not exceed the 1m (125KB in windows), but the result is the downloading speed for this end users still can up to 400KB via HTTP/HTTPS. Please advise. Thanks.

  Read the article

• Cisco ASA 5505: Force NAT before IPsec?

  - by WuckaChucka

  I'm trying to route public-to-public IPs over an IPSec tunnel. However, the src IP is not "interesting" to the Cisco's IPSec engine because it doesn't appear to be getting translated to the outside IP before being evaluated by the Cisco's IPSec engine. From WEST to EAST, my public-to-public IPSec works fine: I can make a request from 192.168.0.5:any to 200.200.200.200:80 because the Vyatta does the NAT translation before the IPSec tunnel inspects the traffic, so the remote-subnet and local-subnet matches (see below). However from EAST to WEST, I see a deny in my Cisco logging buffer for Deny tcp src inside:192.168.1.5/59195 dst outside:100.100.100.100/80 which leads me to believe that the IPSec engine is not matching the encrypt_acl because the address has not been translated yet. Any ideas? WEST (Vyatta): inside: 192.168.0.0/24 inside host: 192.168.0.5/24 outside: 100.100.100.100 IPSec local-subnet: 100.100.100.100/32 IPSec remote-subnet: 200.200.200.200/32 EAST (Cisco): inside: 192.168.1.0/24 inside host: 192.168.1.5/24 (DNAT'ed on port 80 to outside) outside: 200.200.200.200 IPSec local-subnet: 200.200.200.200/32 IPSec remote-subnet: 100.100.100.100/32

  Read the article

• copying an lvm partition to a smaller disk, and renaming volume groups.

  - by dlamblin

  I was trying to shrink a vmdk (VMWare disk image) file to be as small as possible, and found two recommendations. The first is to cat /dev/zero into the fs then delete it, and run VMWare tools' shrink. This works okay. The second is to copy everything into a new vmdk. I went the second route. I did not use dd because I actaully want to use as few blocks as possible, instead of having a block-by-clok copy. Any unlinked files will still have blocks that aren't zeroed out. Secondly the centos image was mostly lvm, except for the boot partition, and my target was going to be 4gb instead of 8gb. I did use dd for the first 40mb to get the boot blocks and partition copied. I then used parted to create an identical primary boot, and smaller primary lvm. Then I used pvcreate on that device sdb2, vgcreate, and lvcreate to create a root and swap. I used mkfs.ext3fs on the root partition and then rsync -av / /2root excluding /proc /sys /2root /dev. So far everything went fine. My problem is that: The result is 2.7 GB while the source was 2.1 GB. This is weird to me. The second vgroup is called VolGroup01, while the original was called VolGroup00. How can I rename the VolGroup01 to VolGroup00 and swap it out after all this?

  Read the article

• Sync clock on Windows XP machine to external (non-domain, non-workgroup) Windows Server 2008 R2 machine

  - by Eric

  I have two machines and I'd like their clocks to be in sync for various reasons. Machine 1 is an XP machine located in the office. Machine 2 is a VPS hosted by a third party running Windows Server 2008 R2. These machines are not in any kind of workgroup or on a domain together. They are completely separate machines. Machine 2 is currently syncing once a week to time.windows.com. The clock on Machine 2 does seem to wander a bit within that week interval. What I would like to do is have Machine 1 set its clock based on the clock of Machine 2. I have tried configuring w32tm on the XP machine. This is what I used for configuration: w32tm /config /syncfromflags:manual /manualpeerlist:"<ip address of machine 2>" However, whenever I issue the /resync command I get "The computer did not resync because no time data was available". I have made sure to start the windows time service on machine 2, and I have added firewall exceptions for UDP port 123. Is there something I need to configure on Machine 2 (other than just starting the time service) in order to get it to respond? Edit: I have also run w32tm /config /reliable:YES /update on Machine 2. I am still getting "The computer did not resync because no time data was available". Is there something else I'm missing?

  Read the article

• Install self-signed certificate on local server (iis)

  - by ile

  On this page there are instructions on how to create self-signed cert (on apache) and how to install this certificate on server. I found this page (http://www.visualwin.com/SelfSSL/) with instructions on how to create self-signed certificate on windows (iis). I followed instructions and when I type https://myip/myapp (this leads to localhost because I set my router's port forwarding to go to localhost on my pc) this part works. From the first link, the most important part is this: What needs to be installed in IE is actually the Root CA Certificate. In the how-to above, the Root CA Certificate is called ca.crt. Copy this file to the server that is running QuickBooks. The following is for IE6: - Open IE - Tools - Internet Options - Content - Certificates - Trusted Root Certification Authorities Tab - Import, Next, Browse to 'ca.crt' - Next, Next, Finish, Close, OK The part that is missing in second link is that there is no instruction on how to get .crt file, so I tried to get it myself. What I did was following: I opened https://myip/myapp in Firefox and then "This Connection is Untrusted" screen appeared. Then I clicked on "Add Exception" and then below "Certificate Status" I clicked "View". Under the Details tab I clicked on Export and choosed Save as type: "X 509 Certificate (PEM)" and file was saved with .crt extension. Then I opened IE8 and followed above instructions. After opening https://myip/myapp in IE8 I always get warning screen. Does anyone knows what am I doing wrong? Thanks, Ile

  Read the article

• How can I find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• NFS headaches with FreeBSD 4.9

  - by Ernie

  Once upon a time, this used to work, and I kept the configuration the same, but... now nothing. I'm just trying to get an NFS server set up on a FreeBSD 4.9 server. The process should be about as complicated as this: Add this entry to /etc/exports: /var/home /var/vpopmail/domains -maproot=root XXX.XX.XX.XXX Execute this: portmap nfsd -u -t -n 4 mountd -r Then this should work, regardless of network and firewall issues: showmount -e localhost But showmount -e localhost fails with the following error: RPC: Port mapper failure showmount: can't do exports rpc And even if I kill off the NFS daemon, and try a rpcinfo -p localhost, I get this error: rpcinfo: can't contact portmapper: rpcinfo: RPC: Unable to receive; errno = Connection reset by peer The portmapper is still running. Why the heck does nothing work as if it isn't? Edit to add: FYI: Sockstat gives me this: $ sockstat |egrep "(nfsd|portmap)" root nfsd 86310 3 udp4 *:2049 *:* root nfsd 86310 4 udp4 *:973 *:* root portmap 45920 0 tcp4 *:111 *:* Then, at a later time (say, 5 minutes) it's as if nfsd isn't acting as a server: $ sockstat |egrep "(nfsd|portmap)" root portmap 45920 0 tcp4 *:111 *:* But the nfs daemon is still running: $ ps ax |grep nfsd 86311 ?? I 0:00.00 nfsd: server (nfsd) 86312 ?? I 0:00.00 nfsd: server (nfsd) 86313 ?? I 0:00.00 nfsd: server (nfsd) 86314 ?? I 0:00.00 nfsd: server (nfsd)

  Read the article

• I am getting this error "ssh_exchange_identification:"

  - by adnan kamili

  Every thing was working fine till yesterday and now suddenly I am getting this error if I type ssh -D 9999 [email protected] ssh_exchange_identification: Connection closed by remote host Here is the output: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 172.16.30.30 [172.16.30.30] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/adnan/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/adnan/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/adnan/.ssh/id_rsa-cert type -1 debug1: identity file /home/adnan/.ssh/id_dsa type -1 debug1: identity file /home/adnan/.ssh/id_dsa-cert type -1 debug1: identity file /home/adnan/.ssh/id_ecdsa type -1 debug1: identity file /home/adnan/.ssh/id_ecdsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• How to have SSL on Amazon Elastic Load Balancer with a Gunicorn EC2 server?

  - by Riegie Godwin

  I'm a self taught back end engineer so I'm learning all of this stuff as I go along. For the longest time, I've been using basic authentication for my users. Many developers are advising against this approach since each request will contain the username & password in clear text. Anyone with the right skills can sniff on the connection between my iOS application and my Django/Gunicorn Server and obtain their password. I wouldn't want to put my user's credentials at risk so I would like to implement a more secure way of authentication. SSL seems to be the most viable option. My server doesn't serve any static content or anything crazy of that sort. All the server does is send and receive "json" responses from and to my iOS application. Here is my current topology. iOS application ------ Amazon Elastic Load Balancer ------- EC2 Instances running HTTP Gunicorn. Gunicorn runs on port 8000. I have a CNAME record from GoDaddy for the Amazon Elastic Load Balancer DNS. So instead of using the long DNS to make requests, I just use server.example.com. To interact with my servers I send and receive requests to server.example.com:8000/ This setup works and has been solid. However I need to have a more secure way. I would like to setup SSL between my iOS application and my Elastic Load Balancer. How can I go about doing this? Since I am only sending json responses to my application, do I really need to buy a certificate from a CA or can I create my own? (since browsers will not be interacting with my servers. My servers are only designed to send json responses to my iOS application).

  Read the article

• How can I tell GoogleBot that a subdirectory is now a subdomain? [migrated]

  - by cwd

  I had about a million pages of a catalog indexed under a subdirectory, and now that's moved to a subdomain. GoogleBot is crawling each one of them and getting a 301 redirect to the new location. Even though I have set up the redirect rule in the apache sites-enabled configuration file, (i.e. it's early on when apache does the redirect - PHP is not even getting loaded), even though I have done that, the server isn't handling the load well. GoogleBot is making around 5 requests per second, and on top of my normal traffic that is hiking up the CPU for a few hours at a time. I checked in Webmaster Tools and the corresponding documentation for a way to let Google know that the content had been moved from a subdirectory to a subdomain, but with little luck. Basically the most helpful thing I saw said to just send 301 headers for the new location. How can I tell GoogleBot that a subdirectory is now a subdomain? If that is not an option, how can I more efficiently send 301 redirects out for a particular subdomain? I was thinking perhaps the Nginx server but I'm not sure that I can run both Apache and Nginx side by side on port 80 for different subdomains.

  Read the article

• Files on ext4 on Drobo with corrupt, zero-ed out blocks

  - by Patrick

  I have a 2TB ext4 file system (Ubuntu running Linux kernel 2.6.31-22-server x86_64). This file system is the second drive on a Drobo box plugged in via USB. We've not had problems on the first drive (Drobo limits drive size to 2TB due to some OS limitations, so if you have more space than that it appears as two separate drives). I am sharing this files with Samba (smbd 3.4.0) with a mix of Windows and Linux workstations. Recently we've been experiencing some data corruption in multiple files. In many cases I have an un-corrupt original file stored on one of the workstations. These are binary files of various formats, (e.g. SQLite, but others as well). I used "split" to split a corrupt and uncorrupt file into 4096 byte chunks (this is the block size of the ext4 file system). I then ran md5sum on pairs of chunks and discovered that the chunks matched in many cases and in every case where they did not match, the corrupt chunk was a solid chunk of zeroes (620f0b67a91f7f74151bc5be745b7110 for what it's worth). I'm trying to track down a culprit but am a bit at a loss. I don't believe Samba is at fault since I'm using it without issue on the first drive exported by the Drobo. What can I do to narrow this down and find out what's going on?

  Read the article

• Difference in performance: local machine VS amazon medium instance

  - by user644745

  I see a drastic difference in performance matrix when i run it with apache benchmark (ab) in my local machine VS production hosted in amazon medium instance. Same concurrent requests (5) and same total number of requests (111) has been run against both. Amazon has better memory than my local machine. But there are 2 CPUs in my local machine vs 1 CPU in m1.medium. My internet speed is very low at the moment, I am getting Transfer rate as 25.29KBps. How can I improve the performance ? Do not know how to interpret Connect, Processing, Waiting and total in ab output. Here is Localhost: Server Hostname: localhost Server Port: 9999 Document Path: / Document Length: 7631 bytes Concurrency Level: 5 Time taken for tests: 1.424 seconds Complete requests: 111 Failed requests: 102 (Connect: 0, Receive: 0, Length: 102, Exceptions: 0) Write errors: 0 Total transferred: 860808 bytes HTML transferred: 847155 bytes Requests per second: 77.95 [#/sec] (mean) Time per request: 64.148 [ms] (mean) Time per request: 12.830 [ms] (mean, across all concurrent requests) Transfer rate: 590.30 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.5 0 1 Processing: 14 63 99.9 43 562 Waiting: 14 60 96.7 39 560 Total: 14 63 99.9 43 563 And this is production: Document Path: / Document Length: 7783 bytes Concurrency Level: 5 Time taken for tests: 33.883 seconds Complete requests: 111 Failed requests: 0 Write errors: 0 Total transferred: 877566 bytes HTML transferred: 863913 bytes Requests per second: 3.28 [#/sec] (mean) Time per request: 1526.258 [ms] (mean) Time per request: 305.252 [ms] (mean, across all concurrent requests) Transfer rate: 25.29 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 290 297 14.0 293 413 Processing: 897 1178 63.4 1176 1391 Waiting: 296 606 135.6 588 1171 Total: 1191 1475 66.0 1471 1684

  Read the article

< Previous Page | 516 517 518 519 520 521 522 523 524 525 526 527  | Next Page >