Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 521/1106 | < Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >

• How to tune touchpad for smaller area?

  - by M.L.

  I just purchased the Asus Zenbook UX31A and I require some advice regarding tuning the touchpad. Basically my problem is that the mouse buttons are withing the touch area and I would like it to be disabled. Such that only part of the touch area is recognized. I have attached an image to clarify the idea. Basically only the red area in the image should be recognized. I have two reasons for this request. Firstly, I like to hold my thumb on the mouse button instead of holding it in the air. This is problematic, because touchpad thinks that I'm trying some kind of two finger gesture all the time and cursor stops moving. Clicking is also problematic since every finger movement -- regardless of how insignificant it might be -- on the "button" will move the cursor. I have been playing with some synclient settings like AreaBottomEdge etc. They have some effect but then I cannot highlight text or right button stops working. How could I solve this?

  Read the article

• 12.10 upgrade broke brightness keys [closed]

  - by Chris Morgan

  I have been running Ubuntu (64-bit) on my HP 6710b laptop (Core 2 Duo with integrated graphics) for several years, and the backlight brightness keys have always worked. Since I upgraded to Ubuntu 12.10 earlier today, those keys do not work any more. The secondary function keys: Fn+F3: sleep; still works (and considerably faster than ever before!) Fn+F8: battery info; still works Fn+F9: reduce brightness; stopped working in 12.10 Fn+F10: increase brightness; stopped working in 12.10 It may also be worth while mentioning that X does not appear to be receiving the brightness events at all, or at least not sending them out further. (This I detected with a key logger I wrote for a Uni project, which uses X's Record extension; it is informed of the sleep and battery info keystrokes, but doesn't receive the brightness ones at all.) In the mean time, I know that I can use the Brightness & Lock settings screen to alter the brightness. (Wow! I can suddenly make my backlight darker than I could before—I can go right down to turning the backlight off, something I couldn't do before... but this model has a fairly dim screen, so I don't expect to use that much, if ever.) How can I get the brightness keys working again? This question is probably strongly related to I can't control my Brightness in HP Compaq 6710s.

  Read the article

• Multiple X screens without Xinerama

  - by Kalle Elmér

  Is there some way to move Windows between separate X screens in Ubuntu 12.04? With 3 monitors on 2 GPUs, using Twinview is not an option. Xinerama allows me to drag windows between all monitors, but it also means that I lose all hardware acceleration. I don't expect to be able to drag windows between the screens and have them occupy two monitors simultaneously, but there must be some way to transfer a program while it is running. At the moment, I don't even know how to select which monitor it will use when launched. Any pointers?

  Read the article

• Changing Launchpad username, and How to know what sites will be affected?

  - by Daniel Clem

  I am setting up my developer profile on Launchpad, and would like to change my username so it would be same as other sites I use, as well as better reflect me as a person. (that's a much more important thing than it sounds) I want to do this now while I can, because as I understand it, once I set up a PPA it will be impossible to change it due to the username being locked into the PPA URL's to prevent breakages and other problems. But when trying to change my username, it warned me with this message. "Changing your name will change your public OpenID identifier. This means that you might be locked out of certain sites where you used it, or that somebody could create a new profile with the same name and log in as you on these third-party sites." How can I find out which sites will be locked out, and how to still change the username while preventing problems with other sites? Sorry if this is actually a question for Launchpad itself. But I don't know where to post questions like this on the Launchpad site. Edit I understand that it is an issue with OpenID. But how am I to know what sites will be affected? And how do i fix the problems this will cause? Can't I just reset the password (and as a side affect, re-establish the connection with the new username) using my email address?

  Read the article

• How would I batch rename a lot of files using command-line?

  - by Whisperity

  I have a problem which I am unable to solve: I need to rename a great dump of files using patterns. I tried using this, but I always get an error. I have a folder, inside with a lot of files. Running ls -1 | wc -l, it returns that I have like 160000 files inside. The problem is, that I wish to move these files to a Windows system, but most of them have characters like : and ? in them, which makes the file unaccessible on said Windows-based systems. (As a "do not solve but deal with" method, I tried booting up a LiveCD on the Windows system and moving the files using the live OS. Under that Ubuntu, the files were readable and writable on the mounted NTFS partition, but when I booted back on Windows, it showed that the file is there but Windows was unable to access it in any fashion: rename, delete or open.) I tried running rename 's/\:/_' * inside the folder, but I got Argument list too long error. Some search revealed that it happens because I have so many files, and then I arrived here. The problem is that I don't know how to alter the command to suit my needs, as I always end up having various errors like Trying find -name '*:*' | xargs rename : _, it gives xargs: unmatched single quote; by default quotes are special to xargs unless you use the -0 option [\n] syntax error at (eval 1) line 1, near ":" [\n] xargs: rename: exited with status 255; aborting Adding the -0 after xargs turns the error message to xargs: argument line too long These files are archive files generated by various PHP scripts. The best solution would be having a chance to rename them before they are moved to Windows, but if there is no way to do it, we might have a way to rename the files while they are moved to Windows. I use samba and proftpd to move the files. Unfortunately, graphical software are out of the question as the server containing the files is what it is, a server, with only command-line interface.

  Read the article

• kernel panic- not syncing: attempted to kill init!

  - by Jill

  I am not very technical. My system has frozen 3 times in March--- this is what was on screen... Ubuntu 10.04.4 LTS Admin.sybalsky.com tty1 admin.sybalsky.com login: [683454.747106] kernel panic- not syncing: attempted to kill init! I know the system is running: Linux admin.sybalsky.com 2.6.32-40-generic-pae #87-Ubuntu SMP Mon Mar 5 21:44:34 UTC 2012 i686 GNU/Linux Ubuntu 10.04.4 LTS Can you tell me what this all means and why it is happening and what can I do about it?

  Read the article

• How to remove space between application and workspace switcher on Unity launcher?

  - by Tyler Marengo

  I just downloaded Ubuntu 11.10 for the first time. I really enjoy the launcher on the left hand side but have a problem. After playing around with adding applications in it, there are large spaces from the last application to workspace switcher. If I try to drag a new application into the launcher everything moves farther down, instead of filling in the space in between apps. When I right click on the launcher in a blank spot it reads "drop to add application." I'm looking for a way to have all of the applications close together with no spaces, like when I first downloaded Ubuntu.

  Read the article

• Unable to install Skype ("Unmet dependencies" error)

  - by Alex Maslakov

  Trying to install skype on Ubuntu 12, I faced and issue. When I type: sudo apt-get update sudo apt-get install skype I get an error Reading package lists... Done Building dependency tree Reading state information... Done skype is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: skype : Depends: lib32stdc++6 (>= 4.1.1-21) but it is not going to be installed Depends: lib32asound2 (> 1.0.14) but it is not going to be installed Depends: ia32-libs but it is not going to be installed Depends: libc6-i386 (>= 2.7-1) but it is not going to be installed Depends: lib32gcc1 (>= 1:4.1.1-21+ia32.libs.1.19) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). How do I solve it? Is the way I'm using the right one to install skype? UPDATE: If I try to do sudo apt-get install lib32stdc++6 lib32asound2 ia32-libs libc6-i386 lib32gcc1 skype then I get Reading package lists... Done Building dependency tree Reading state information... Done skype is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch lib32asound2 : Depends: libasound2 (= 1.0.25-1ubuntu10) E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).

  Read the article

• How do I find add-ons for packages when using the command line?

  - by user74660

  My question is a little bit different from others already asked, I guess. I've already searched for answers, but I didn't find anything related. For example, I've always installed K3B via Terminal with the following command "sudo apt-get install k3b". It always worked, of course. One day, I decided to install it via Ubuntu Sofware Center and, to my surprise, there were a few Add-ons I didn't know about. I checked some of them to be installed as well because I found them useful. Now, here's my question: When we try to install a software via Terminal and this software has add-ons, how do we know that? And how do we install the add-ons via Terminal? I suppose we have to know the names of the add-ons first, and then install them one by one, once the main software has already been installed. But how do we get to know those names via Terminal? Using the Software Center is cool because it shows the add-ons, a brief description for each one and their names in brackets, right? How about that via Terminal? I had never paid attention to this until I used the Software Center. By the way, K3B was just an example, of course.

  Read the article

• DHCP Fails To Start

  - by user209138

  I just installed Ubuntu 12.0.4 on an HP 8560 laptop. I installed Fog version 29 and everything worked just fine except the DHCP3 package failed to start. When I run the install command it says DHCP3 is installed, but when I type in the following command to start DHCP (sudo /etc/init.d/DHCP3-server start it says the command is not found. Is there a different command for Ubuntu 12? I have been using Ubuntu 10 on my other fog servers and that command works fine.Thank you for your help.

  Read the article

• Restart Trouble Ubuntu 12.10

  - by Cristi

  I`ve installed Ubuntu 12.10 on 3 different machines: Acer AspireOne Netbook Lenovo T60 Notebook Desktop - P5P77 - Asus mainboard - I3 - porcessor I have the same issue on all of themm they won`t restart (Shut Down work), I can see the proceses are killed but it freezez on black screen total iresponsive. Even when I access the bios config to modify something then Save&Exit then restart I get the same thing. This is the same for all 3 machines. I also cleaned up the desktop system, last version of bios update, full HDD format, fresh win7 installed (practicly no trace of the old Ubuntu 12.10) still the same problem. Some time ago I had Ubuntu 11.10 on the desktop system, it worked perfectly. I also mention that I tried all combinations of ACPI settings in BIOS, unfortunately with no results. Please advice, I am a little desperate :)) Best regards, Cristian, Romania

  Read the article

• Is it possible to save output from a command to a file after the command already has been executed?

  - by NES

  Does an elegant way exist to save the output of a command to a file after the command has been run, with the terminal window is open? I mean once the command has been executed in the terminal. The output is still there in terminal. Now i could copy & paste all the lines and save it to a file. But perhaps does a method exist to somehow write the output buffer of a terminal window to a file or even better the output of an already executed command?

  Read the article

• Disabling Bluetooth crashes 3G: can I consider this a bug?

  - by workflow

  I'm on an Acer TravelMate 8372G here runnning Ubuntu 11.10 64bit and I get the following weird behaviour: As soon as I turn off bluetoooth, the built-in 3G connection disconnects and Network Manager is unable to reconnect, leaving the following track in syslog: NetworkManager[1205]: <warn> GSM modem enable failed: (32) Unknown error The only way I'm able to reconnect 3G is by going all the way through rfkill unblock bluetooth rfkill block wwan rfkill unblock wwan sudo service network-manager restart My question to you guys: should I file a bug, or is there any any logical connection I'm missing that makes this a feature? = thanks! workflow

  Read the article

• how can I update my Firefox 4.0 beta in Ubuntu 11.04 natty 64bit ?

  - by Denja

  Hi community, I'm using Ubuntu 11.04 natty 64bit with the integrated Firefox 4.0 beta Firefox 4.0 is not yet stable as beta and has lots of bugs when I open mainly Java applications in the web.Usually it freeze and even mess with Ubuntu gnome panel. It seems I cannot find any PPA related with Firefox beta updates in my Software source . How can I update my Firefox 4.0 beta in Ubuntu 11.04 natty 64bit?

  Read the article

• Frustrated with MythTV 0.26

  - by Mike

  I've been using MythTV for a while now. Until a hardware crash I had a 0.25 box running without problems. Had to get new hardware and am now in the process of setting up 0.26. Every time I pick a menu option, it hangs for 1 minute. Every time I try to start the backend, same thing. I pick a new theme in the frontend, but it never gets used. I try to test audio, but all I get is static (from the proper channels though). I've setup the storage groups in the backend and put a video in /storage/videos but the front end won't see it when I scan for changes. I make changes in the front end configuration and they don't get saved (or get lost randomly 2-3 reloads later). Obviously there is something I am doing catastrophically wrong, but I have no idea what. Are the storage groups not working yet? Maybe I need to delete all the storage group entries and just use the front end override to set the path? I'm currently using lvm across 3 hard disks, and this has worked well for me in the past. I'd like to use storage groups, but frankly I don't see them working yet at all - especially not for videos (which is what we watch 99% of the time). Anyone have any suggestions for me to try before I just call 0.26 bad names and wipe the system?

  Read the article

• Nautilus copies files but not directories from samba server on OS X

  - by camsolo

  I need to copy files from OS X on a Mac to Ubuntu on a PC. I enabled File Sharing on the Mac and selected the samba option. I was then able to connect to the samba server in Nautilus. Copying files was no problem, but copying directories failed, with the error message "is a directory". I can accomplish what I want using samba in the terminal. But it would be more conveninient to do this in Nautilus.

  Read the article

• Flashing task bar(firefox) in lxde panel and ubuntu internal error

  - by arroy_0209

  I have upgraded from ubuntu10.04 to 12.04 and installed lxde. The panel is now customized according to my convenience. The problem is there was a default checked option for "Flash when there is any window requiring attention" in Task bar(window list) and now when I run firefox, at times the concerned bar in the panel window list starts flashing but it is not clear exactly why at that moment firefox requires my attention. Normally this happens after I download some files (pdf files) and keep using firefox. The only solution I have found is to quit firefox and even after that I receive this message "Sorry, ubuntu12.04 has experienced an internal error. If you notice further problems, try restarting the computer." As usual I report the detailed message to ubuntu as suggested and finally restart the computer. So there are two problems, first, exactly why firefox needs my attention at times and second, why immediately after this, ubuntu experiences an internal error. Please suggest what I should do.

  Read the article

• Running a startup program in terminal as sudo

  - by Brandon

  I need to run a python script in a terminal, myscript.py at startup (on Lubunt). This script requires root. I've setup a .desktop file that runs the following command: lxterminal --command="python /home/d/Jarvis/alarm.py && /bin/bash" The terminal window opens at startup and runs the script, but then closes when the Python script returns an error (because it's not being run as root). When I change the Exec= to this... lxterminal --command="sudo python /home/d/Jarvis/alarm.py && /bin/bash" ... (prefixing command with 'sudo') which works. However, the terminal opens on startup and displays the [sudo] password for d: \ prompt, requiring me to input my password. I would like the execution of the python script at startup to be completely automatic with no user interaction. How can I accomplish this?

  Read the article

• 'module' object has no attribute 'element_make_factory'

  - by Ronan Dejhero

  i have this code : import pygst import st, pygtk player_name = gst.element_make_factory("playbin", "Multimedia Player") player_name.set_property("uri", "../media/alert.mp3") player_name.set_state(gst.PLAYING) it keeps throwing me the following error : player_name = gst.element_make_factory("playbin", "Multimedia Player") AttributeError: 'module' object has no attribute 'element_make_factory' nay way to solve this and why is this happening ? if i print gst i get the following : <module 'gst' from '/usr/lib/python2.7/dist-packages/gst-0.10/gst/__init__.pyc'> so it is a module !

  Read the article

• Unable to mount /dev/loop0 during install

  - by AJP

  I was installing 32-bit Ubuntu(ubuntu-10.10-desktop-i386.iso) on VMWare workstation 7.1. During installation an error came up with the following text. (initramfs) mount: mounting dev/loop0 on //filesystem.squashfs failed: Input/Output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs I did a memory test which was successful, but when selecting "Try Ubuntu without installing", "Install Ubuntu" or "Check disk for defects" the same error is showing up. I download the ISO image from Ubuntu website "http://www.ubuntu.com/desktop/get-ubuntu/download". As I couldn't find the checksum data, the ISO image was verified by mounting to a virtual drive and browsing the contents. The ISO image is mounted to a virtual drive in VMWare and not burnt to a CD.

  Read the article

• Ubuntu 10.10 USB drive not showing

  - by Ben

  USB is detecting but not showing the drives or mount details. Nothing there inside my /media folder and /mnt folder. I already enabled automatic mount and give privilege to user also. My sudo fdisk -l shows like: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d3ba7 Device Boot Start End Blocks Id System /dev/sda1 * 1 29637 238053376 83 Linux /dev/sda2 29637 30402 6142977 5 Extended /dev/sda5 29637 30402 6142976 82 Linux swap / Solaris Any idea?

  Read the article

• Terminal/Putty showing control characters (^M) after updating

  - by jaycee48

  I updated my system yesterday afternoon using the recommended updates from Update Manager. After it completed, I shutdown my system and went home for the day. I come in this morning and I am getting control characters displayed when using vi in both the standard terminal emulator, putty, and putty inside of my Windows virtual that I run with VirtualBox. I have made no other system changes and I cannot figure out how this occurred. It's as if every text file I have was created in DOS. I've searched the forums and I haven't found any answers. I am using xterm as my emulator and I checked with 3 of my coworkers and none of them are having this problem so we do not believe it is a server side issue. Especially since I've checked 3 different servers. There's nothing in my .profile other than PATH variables so I'm using the same terminal settings as everyone else. Some files are fine (I can open and read both /etc/environment and my .profile) but most of any kind of server generated log file is trash. Running cat or head on the same file displays the contents without the characters. Any ideas would be appreciated. Thanks.

  Read the article

• My user can't upload files to folders owned by www-data

  - by Thomas Gautvedt

  I think I have screwed up my permissions in Ubuntu. I am using my server to run PHP. I recently ran across a problem where PHP could not create directories in the var/www-directory, so I searched around on the internet. Now PHP can write and access anything like it should, but as a user, I can't create new folders or files anymore. Right now, the permissions for folders are like this: drwxrwsr-x 2 www-data www-data [Folders] This is the permissions when I upload using sftp: -rw-rw-r-- 1 gautvedt www-data [Folders] What have I done wrong and how can I change this?

  Read the article

• What folder is this code signifying?

  - by clifgray

  I am trying to install OpenNi on ubuntu and have found some decent looking instructions but I am not sure what I need to do for this one specific case. Here are the instructions and here is the line that is tripping me up: cd OpenNI/Platform/Linux/CreateRedist/ chmod +x RedistMaker ./RedistMaker cd ../Redist/OpenNI-Bin-Dev-Linux-x64-v1.5.2.23/ sudo ./install.sh I don't know what folder the cd ../Redist/OpenNI-Bin-Dev-Linux-x64-v1.5.2.23/ line is talking about and can't find it anywhere. Does anyone know what this is?

  Read the article

• U1 Music Streaming: Is it possible to have album cover art for OGG files?

  - by Will Daniels

  Just started trying out the U1 music streaming service and so far very pleased. The one issue I have that could be a deal-breaker when it comes time to pay up is that half of my collection is OGG Vorbis and I cannot find a way to show album art for OGG files. I already tried adding a cover.jpg to the folder and embedding the image via easyTAG (works for MP3 but not OGG). Does anybody have a solution besides transcoding them all to MP3? Will this likely be supported in future?

  Read the article

< Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >