Search Results

Search found 20809 results on 833 pages for 'library advice'.

Page 521/833 | < Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >

  • How bad does it look to have left a job soon after starting? [closed]

    - by unitedgremlin
    I have a job I would like to leave. On advice from friends and parents I have stayed. Their primary concern is that it would look bad on my resume if I left only after a few months of joining. My concerns with the job are as follows: When I started it was preferred I provide and use my own equipment. Could be out of business in a few months from lack of cash flow Poor code quality: memory leaks and lack of error handling. The same mistakes continue to be made even though I have raised the issue. It has become evident that co-workers do not understand memory management rules of the platform and are not interested in learning them. Yet, there is still surprise from them when strange bugs continue to crop up. As a result don't feel I will learn from co-workers. Plus, fixing the the lingering bugs and trying to keep up on new feature development is like a game of whack-o-mole that never ends. I don't believe in the companies vision or its ability to execute on the ideas anymore. My ideas and suggestions for very small tweaks are quickly dismissed. And so more than half or so have come back as bugs that we end up needing to address. I have been told to wait on fixing bugs in codes until we can talk to the original author. I don't feel I am allowed to take initiative to just fix/change things and do what I think is best. Everything needs consensus even for a bug fix before any work is done. I am adopting a shut-up and just do what I am told approach to save myself from ulcers. Lots of meetings (I am personally not involved in all of them which is good) but the sheer amount reminds me of days at a big corporation. Why is everyone around me always meeting? It's a small company. I can count everyone on my toes and fingers. I can say with certainty I have no interest in working with any of them again. This is the first time I have truly worked with a group of so called "B and C players". Ultimately, I think it is my fault for not doing a better job evaluating the team and company before joining. But I have generated a better set of questions when probing companies in the future. My questions are: How bad does it look to have left a job soon (few months) after starting? What would be the best way to explain my concerns and reasons for leaving without badmouthing the company? Should I stick it out to what I believe will be the soon end of the company?

    Read the article

  • How do I prevent Ubuntu gradually slowing down to a stop?

    - by user29165
    I really do not know what is causing the problem of my desktop environment (D.E.) gradually slowing down. It seems to happen in Gnome 3.2, LXDE, XFCE, and KDE. I am running Ubuntu 11.10 and this problem started happening from a fresh install. I have noticed that if I restart Gnome or otherwise re-log-in with any of the D.E.s the speed resets to normal. I don't seem to have and memory leaks that account for it and there are not any processes that are using excessive CPU cycles. Due to the symptoms I am guessing that there is an underlying package that interacts with all D.E.s that is the source of the problem. Just to clarify, in extreme situations, if I let the slowdown continue without a restart of the D.E. my system will finally get to a point where everything, even my clock, freezes. The time over which Gnome slows down (noticeably after 17 hrs) is much less than LXDE, or XFCE but eventually they freeze as well. I didn't mention Unity since I haven't used it enough to verify the problem, but I don't see why it should be different. Just in case this is relevant, I Suspend my computer rather than turn it off. I do this because of the greatly reduced load time and the 17 hrs I stated above is actual up-time, not time where the D.E. is actually active. However, the slow down does not seem to be affected by how long the computer has been in suspend mode. I know that it is possible that this problem is due to an interaction between two or more of the applications that I use and as such it may not be able to be duplicated by others. In the end I am just wondering (a) are other people experiencing this issue and (b) does anyone have some advice on where to start looking for a solution if one is not already known. I am even open to the idea of switching to the beta release of 12.04 if anyone thinks it will solve the problem. Edit: I took a video of my latest freeze that you can watch at http://youtu.be/flKUqUzCmdE, sorry about the audio. Edit: Since that video I checked my memory for errors and tried installing the proprietary video drivers. No memory errors were found and the proprietary video drivers made the display unusable so I had to uninstall them. Any thoughts?

    Read the article

  • How can I combine my FTP queries? [migrated]

    - by ryansworld10
    My program has several times where it queries an FTP server to read and upload information. How can I combine all these into one FTP class to handle everything? private static void UploadToFTP(string[] FTPSettings) { try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0]); request.Method = WebRequestMethods.Ftp.MakeDirectory; request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); FtpWebResponse response = (FtpWebResponse)request.GetResponse(); } catch { } try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0] + Path.GetFileName(file)); request.Method = WebRequestMethods.Ftp.UploadFile; request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); StreamReader source = new StreamReader(file); byte[] fileContents = Encoding.UTF8.GetBytes(source.ReadToEnd()); source.Close(); request.ContentLength = fileContents.Length; Stream requestStream = request.GetRequestStream(); requestStream.Write(fileContents, 0, fileContents.Length); requestStream.Close(); FtpWebResponse response = (FtpWebResponse)request.GetResponse(); response.Close(); RegenLog(); } catch (Exception e) { File.AppendAllText(file, string.Format("{0}{0}Upload Failed - ({2}) - {1}{0}", nl, System.DateTime.Now, e.Message.ToString())); } } private static void CheckBlacklist(string[] FTPSettings) { try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0] + "blacklist.txt"); request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); using (WebResponse response = request.GetResponse()) { using (Stream stream = response.GetResponseStream()) { using (TextReader reader = new StreamReader(stream)) { string blacklist = reader.ReadToEnd(); if (blacklist.Contains(Environment.UserName)) { File.AppendAllText(file, string.Format("{0}{0}Logger terminated - ({2}) - {1}{0}", nl, System.DateTime.Now, "Blacklisted")); uninstall = true; } } } } } catch (Exception e) { File.AppendAllText(file, string.Format("{0}{0}FTP Error - ({2}) - {1}{0}", nl, System.DateTime.Now, e.Message.ToString())); } } private static void CheckUpdate(string[] FTPSettings) { try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0] + "update.txt"); request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); using (WebResponse response = request.GetResponse()) { using (Stream stream = response.GetResponseStream()) { using (TextReader reader = new StreamReader(stream)) { string newVersion = reader.ReadToEnd(); if (newVersion != version) { update = true; } } } } } catch (Exception e) { File.AppendAllText(file, string.Format("{0}{0}FTP Error - ({2}) - {1}{0}", nl, System.DateTime.Now, e.Message.ToString())); } } I know my code is also a bit inconsistent and messy, however this is my first time working with FTP in C#. Please give any advice you have!

    Read the article

  • laptop will not boot after attempting upgrade to 13.10

    - by naerwenya
    I wanted to update my OS to the new 14.04 LTS. I was running 12.04 LTS before and followed the advice that upgrades should be done in steps. I first upgraded to 12.10, which seemed to work fine, and later to 13.10. This was all done through the Software Manager. After the last upgrade, I am no longer able to boot up my computer. The GNU GRUB menu opens up, but after selecting Ubuntu, it just stalls with a blank purple screen. If I select one of the other kernels, it also stalls after "Loading initial ramdisk...". I can't get into the Recovery Menu, either. I'm still rather new to Linux and may have possibly made the situation worse. Unfortunately, nothing has worked yet. I tried reinstalling from a flash drive and on my first attempt, the wizard recognised a previous installation. Unfortunately, the wizard also didn't like how my partitions were set up (I didn't change anything) and gave an error before closing. Unfortunately, I didn't write the error down, but it was about the boot partition. On the next attempt and ever since, the installation wizard has stated that "This computer currently has no detected operating systems." This is strange, because I could see the disk and even access my files when booting up from the USB. At this point, I decided to back up my important files using dropbox. Before losing all my files, I wanted to try the Boot-Repair tool, which also produced no results, and the files are no longer visible when booting from USB. The link to the Boot-Repair log is at http://paste.ubuntu.com/7457249/. If I then proceed through to the "Something else" installation option, I can see that the partitions still exist. This is what they look like: /dev/sda free space (size indicated 1MB) /dev/sda1 efi (33MB of 98 MB used) /dev/sda2 efi (352634MB of 746330MB used) /dev/sda3 swap (3725MB, none used) free space (0MB) Is there any way I might be able to get my computer to work and preserve my files as well?

    Read the article

  • Core i7-620M vs Core i5-540M

    - by Shalan
    Hi, I'm recommending a laptop to a colleague, and the specific laptop he has chosen has the above CPU chips as options. Both chips have 2-cores/4-threads. The i7-620M is a 2.66 GHz (4MB Cache) while the i5-540M is a 2.53 GHz (3MB Cache)....both Arrandale architecture. He is a .NET programmer working with SQL Server and Oracle, and occasionally uses Adobe Fireworks for web-related design elements. He also loves playing around in Adobe Premiere Pro, and does a lot of media/video work. Would you notice any significant performance difference between the 2? The laptop manufacturer claims that the battery life on both is the same irrespective of the chip used (although I find that hard to believe), but there is a major cost difference between them, with the Core i7-620M being the more expensive. According to http://ark.intel.com, the one thing that seems different (besides the obvious speeds/frequencies/etc) is a feature called "Embedded" - what is this exactly? You can see the quick comparison here - http://ark.intel.com/Compare.aspx?ids=43544,43560 I would sincerely appreciate any advice me on this. THANKS!

    Read the article

  • Formatting a truecrypt volume on windows: Truecrypt failed to obtain administrator privileges

    - by daveh551
    Following shaneselman's advice (http://www.hanselman.com/blog/TheComputerBackupRuleOfThree.aspx), I'm setting up a 2TB external drive as a backup, and encrypting it using TrueCrypt. This is under Windows 7. (I've used TrueCrypt before, but not since XP days.) I installed TrueCrypt with default options. After taking 23 hours to format the 2TB container, it finishes with an error saying "TrueCrypt cannot obtain administrator privileges." When I click OK on that, it says it can't format the container as NTFS, do I want to format it as FAT, and I don't so I click No, and it exits with nothing to show for 23 hours of compute time. So I set the "Run as administrator flag" on the TrueCrypt shortcut, and try again. This time, when I go to format the contain (prepared to wait ANOTHER 23 hours), it pops up a dialog saying you're formatting this as administrator. "The volume may be created with permissions that will not allow you to write to the volume when it is mounted. If you want to avoid that, close this instance of Volume Creation Wizard and launch a new one without administrator privileges." Great - I can either run as non-administrator, and it will fail to create the volume at all, or I can run as administrator and create a volume I can't write to. I think I'm doing something wrong, but it's not clear to me what. Any help?

    Read the article

  • Cant connect to mysql using self signed SSL certificate

    - by carpii
    After creating a self-signed SSL certificate, I have configured my remote mysqld to use them (and ssl is enabled) I ssh into my remote server, and try connecting to its own mysqld using ssl (mysql server is 5.5.25).. ~> mysql -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key --ssl-ca=ca.cert Enter password: ERROR 2026 (HY000): SSL connection error: error:00000001:lib(0):func(0):reason(1) Ok, I remember reading theres some problem with connecting to the same server via SSL. So I download the client keys down to my local box, and test from there... ~> mysql -h <server> -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key --ssl-ca=ca.cert Enter password: ERROR 2026 (HY000): SSL connection error Its unclear what this "SSL connection error" error refers to, but if I omit the -ssl-ca, then I am able to connect using SSL.. ~> mysql -h <server> -u <user> -p --ssl=1 --ssl-cert=client.cert --ssl-key=client.key Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 37 Server version: 5.5.25 MySQL Community Server (GPL) However, I believe that this is only encrypting the connection, and not actually verifying the validity of the cert (meaning I would be potentially vulnerable to man-in-middle attack) The ssl certs are valid (albeit self signed), and do not have a passphrase on them So my question is, what am I doing wrong? How can I connect via SSL, using a self signed certificate? MySQL Server version is 5.5.25 and the server and clients are Centos 5 Thanks for any advice Edit: Note that in all cases, the command is being issued from the same directory where the ssl keys reside (hence no absolute path)

    Read the article

  • Telling subversion client to ignore certificate errors

    - by Pekka
    I have set up a copy of Redmine through the Bitnami Redmine Stack and am having trouble accessing a remote SVN repository through https. The trouble seems to be related to the fact that I don't have a signed certificate, and the certificate provided doesn't match the host name (I am accessing the same server through a number of host names). I am new to Ruby, Mongrel, Rails and Redmine. Following the advice in this forum thread, I changed the path Redmine uses to invoke the svn client in \apps\redmine\lib\ redmine\scm\adapters\subversion_adapter.rb from SVN_BIN = "svn" to SVN_BIN = "svn --trust-server-cert --non-interactive --config-dir c:/user/temp" I was hoping that the --trust-server-cert option would fix the certificate problem. However, I am still getting the following error message in mongrel.log: svn: OPTIONS of 'https://server.xyz:8443/svn/reponame': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://server.xyz:8443) Does anybody know what to do about this? Additional info: I re-started the mongrel service after each change I am sure the configuration change has taken effect because subversion has created a full configuration directory in c:\user\temp I can access the remote repository using command line svn no problem The remote repository runs on a Windows box with VisualSVN

    Read the article

  • Hotmail Senders receiving NDR : "550-Please turn on SMTP Authentication in your mail client..."

    - by DKNUCKLES
    Recently, senders from Hotmail have begun to get the following NDR when trying to e-mail our domain. EDIT : Full NDR Message Action: failed Status: 5.5.0 Diagnostic-Code: smtp;550-Please turn on SMTP Authentication in your mail client, or login to the 550-IMAP/POP3 server before sending your message. 550-snt0-omc3-s36.snt0.hotmail.com [65.55.90.175]:49271 is not permitted to 550 relay through this server without authentication This is seemingly out of the blue and I'm at a loss as to why this is happening. Pertinent Information We have multiple domains hooked up to our Exchange server. We changed our company name in January of this year, and the old primary domain (olddomain.com) will accept e-mails from Hotmail accounts, however e-mails sent to the new primary domain (newdomain.com) bounce back with the NDR listed above. The bounces only appear to be happening when the Hotmail sender is sending a new e-mail, and not if they are responding to an e-mail sent from our end. We have made no changes to the configuration of our server recently. This e-mail first appeared last Friday. As far as I can tell, the mail doesn't even seem to get to our server We performed an Exchange 2003 to 2010 migration last year. The 2003 acts as a Smart Host Any advice on this issue would be greatly appreciated! I'm at a loss

    Read the article

  • The Message Queuing service failed to join the computer's domain 'DOMAIN' Error 0xc00e0025

    - by SimonGoldstone
    Struggling to get MSMQ installed in Domain Integration mode on Windows 2012 (Azure). So far, I've provisioned a brand new Windows Server 2012 (R2) machine on the Azure platform and installed the Active Directory role and promoted the machine to a domain controller. Once the AD was in place, I then added the MSMQ feature, along with the Directory Integration add on. However, it will not install in AD integration mode. It will only work in Workgroup mode. I can verify this by running the following powershell command: New-MSMQQueue -name Queue1 -queuetype Public When I run this command, I get the following error: New-MsmqQueue : A workgroup installation computer does not support the operation. The event viewer reveals to errors in the Application log: 1. The Message Queuing service failed to join the computer's domain 'DOMAIN'. Error 0xc00e0025: 2. Message Queuing was unable to create the msmq (MSMQ Configuration) object in Active Directory Domain Services. Error c00e0025h: I'm struggling here. Any advice?

    Read the article

  • How do I configure freeSSHd on Windows Server 2008 so I can log in using ssh?

    - by Daryl Spitzer
    I've installed freeSSHd on a Windows Server 2008 box (following the instructions in How to install an SSH Server in Windows Server 2008), including: created a user named "dspitzer" with NTLM authorization opened an exception for port 22 in the Windows Firewall But when I try to connect (from a Mac OS X 10.5.8 command-line), I get permission denied after entering the password: $ ssh 12.34.56.78 [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried: $ ssh [email protected] [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried changing the authorization to "Password stored as SHA1 hash" and entering a simple password, but I get the same problem. And I've tried a different user name ("Administrator") with no luck. I've confirmed that I am connecting to the server I'm configuring—if I stop freeSSHd and try to connect I get: $ ssh 12.34.56.78 ssh: connect to host 12.34.56.78 port 22: Operation timed out I get the exact same results from a Linux command-line. Any advice or troubleshooting tips? Update: I tried disabling the firewall (in response to geeklin's comment) and it made no difference. Update #2: I no longer have this machine (I've changed employers), so I have no way of verifying the answers. I guess all I can do is make this question "community wiki".

    Read the article

  • How do I configure freeSSHd on Windows Server 2008 so I can log in using ssh?

    - by Daryl Spitzer
    I've installed freeSSHd on a Windows Server 2008 box (following the instructions in How to install an SSH Server in Windows Server 2008), including: created a user named "dspitzer" with NTLM authorization opened an exception for port 22 in the Windows Firewall But when I try to connect (from a Mac OS X 10.5.8 command-line), I get permission denied after entering the password: $ ssh 12.34.56.78 [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried: $ ssh [email protected] [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried changing the authorization to "Password stored as SHA1 hash" and entering a simple password, but I get the same problem. And I've tried a different user name ("Administrator") with no luck. I've confirmed that I am connecting to the server I'm configuring—if I stop freeSSHd and try to connect I get: $ ssh 12.34.56.78 ssh: connect to host 12.34.56.78 port 22: Operation timed out I get the exact same results from a Linux command-line. Any advice or troubleshooting tips? Update: I tried disabling the firewall (in response to geeklin's comment) and it made no difference. Update #2: I no longer have this machine (I've changed employers), so I have no way of verifying the answers. I guess all I can do is make this question "community wiki".

    Read the article

  • blu-ray archiving in vmware ESXi 4

    - by spacecadet77
    Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

    Read the article

  • apache Client Certificate Authentication errors: Certificate Verification: Error (18): self signed certificate

    - by decoy
    So I have been following instructions on setting up Client Certificate Authentication in Apache2 w/ mod_ssl. This is solely for the purpose of testing an application against CAA, not for any sort of production use. So far I've followed http://www.impetus.us/~rjmooney/projects/misc/clientcertauth.html for advice on generating my CA, server, and client encryption information. I've put all three of them into /etc/ssl/ca/private. I've setup the following additional directives in my default_ssl site file: <IfModule mod_ssl.c> <VirtualHost _default_:443> ... SSLEngine on SSLCertificateFile /etc/ssl/ca/private/server.crt SSLCertificateKeyFile /etc/ssl/ca/private/server.key SSLVerifyClient require SSLVerifyDepth 2 SSLCACertificatePath /etc/ssl/ca/private SSLCACertificateFile /etc/ssl/ca/private/ca.crt <Location /> SSLRequireSSL SSLVerifyClient require SSLVerifyDepth 2 </Location> <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> ... </VirtualHost> </IfModule> I've install the p12 file into Chrome, but when I go to visit https://localhost, I get the following errors Chrome: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. Apache: Certificate Verification: Error (18): self signed certificate If I had to guess, one of my directives is not setup right to load and verify the p12 w/ my self created CA. But I can't for the life of me figure out what it is. Would anyone have more experience here who could point me in the right direction?

    Read the article

  • Can't create directory named "mysql" in subversion repository

    - by High Ball
    I have a particular problem with subversion. Environment: subversion (1.6.12dfsg-6), apache2 (2.2.16-6+squeeze7) + mod dav_svn. I can't create a directory named "mysql" or "testmysql" or add and commit a file named "mysql.txt" in my repository. There are many references to "subversion PROPSET 403 forbidden" problems in google and so on. But I can use all functions of subversion. I can also create a directory named "hugo" or "test". My repository works properly. Only "mysql" doesn't work. The following errors occur: The server encountered an unexpected return value (403 Forbidden) in response to the request for MKCOL »/svn/repository/!svn/wrk/8123484e-8890-412d-92ed-62ceabcd4189 /etc/mysql" returned /var/log/apache2/access.log 192.168.178.200 - - [time] "OPTIONS /svn/repository/etc HTTP/1.1" 401 6156 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "OPTIONS /svn/repository/etc HTTP/1.1" 200 1028 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "MKACTIVITY /svn/repository/!svn/act/6564e2e2-19be-4a09-bcb6-61a1cfb097e8 HTTP/1.1" 201 676 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "PROPFIND /svn/repository/etc HTTP/1.1" 207 676 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "CHECKOUT /svn/repository/!svn/vcc/default HTTP/1.1" 201 692 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "PROPPATCH /svn/repository/!svn/wbl/6564e2e2-19be-4a09-bcb6-61a1cfb097e8/157 HTTP/1.1" 207 580 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "PROPFIND /svn/repository/etc HTTP/1.1" 207 564 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "CHECKOUT /svn/repository/!svn/ver/157/etc HTTP/1.1" 201 692 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "MKCOL /svn/repository/!svn/wrk/6564e2e2-19be-4a09-bcb6-61a1cfb097e8/etc/mysql HTTP/1.1" 403 596 "-" "SVN/1.6.12 (r955767) neon/0.29.3" 192.168.178.200 - user1 [time] "DELETE /svn/repository/!svn/act/6564e2e2-19be-4a09-bcb6-61a1cfb097e8 HTTP/1.1" 204 165 "-" "SVN/1.6.12 (r955767) neon/0.29.3" Has anyone seen this before? Thanks for any advice.

    Read the article

  • Sticky connection and HTTPS support for HAProxy

    - by Saif
    Hi Mates, We have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 apache nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file. global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend main *:5000 acl url_static path_beg -i /static /images /javascript /stylesheets acl url_static path_end -i .jpg .gif .png .css .js use_backend static if url_static default_backend app #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- backend static balance roundrobin server static 127.0.0.1:4331 check #--------------------------------------------------------------------- # round robin balancing between the various backends #--------------------------------------------------------------------- backend app listen ha-http 10.190.1.28:80 mode http stats enable stats auth admin:xxxxxx balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /haproxy.txt HTTP/1.0 server apache1 portal-04:80 cookie A check server apache2 im-01:80 cookie B check server apache3 im-02:80 cookie B check server apache4 im-03:80 cookie B check Please advice. Thanks for your help in advance.

    Read the article

  • Windows Server 2008 R2, SQL Server 2008 R2, and Registry Backups

    - by charliedigital
    Hi folks! As a developer, I've installed various instances of SQL Sever (2000, 2005, 2008, R2) from all the ways back to 2003 and I've never had an install fail on me....until yesterday. I was installing SQL Server 2008 R2 onto a Windows Server 2008 R2 hosted virtual server and the install finished, but failed on every component. To make matters worse, it was in a state in which I could not uninstall it either, even using command line options! I dug around a bit, but didn't get very far with it. The error is enigmatic and Google didn't turn up much hope. So today, I am going to try again after having the VM image wiped overnight. My question is how can I guard against the same failure today? I don't mind if it fails, but then I know it may be something wrong with the base image I'm getting from the hosting company. I really don't feel like paying another $20 to wipe the VM and I have no idea why it failed. Is it enough for me to backup the registry so that I can restore it in case it fails? What about the installation files? Do I need to have a tool to clean that out, too? Sorry, I'm no sys admin so no real experience with backup/restore aside from System Restore! So any advice would be appreciated!

    Read the article

  • Cannot run "Automation Anywhere" exe files from console (session 0) on Windows Server 2003 64 bit

    - by Tyler
    I have a simple exe created from an Automation Anywhere task that displays a message box saying hello world. I created this simple exe just for debugging the following issue. When I log in to the console (session 0), and run the Automation Anywhere created executable, it starts to run the task, it shows up in the applications and processes list in the task manager and it shows the two "loading..." windows briefly on the screen, just like normal. But after that, nothing happens... the "hello world" message does not show up. The exe is done and is removed from the application and process list in the task manager. The user I am logged in as, has admin rights and the machine uses "autologin" to automatically log in using this profile when it starts up. If I right click on the exe and "run as" another admin user, the exe runs properly, showing the "hello world" message. Also, if I log into the server in a new session, with the original user (the one that has the problems in session 0), and then run the exe, it runs properly and shows the "hello world". It works fine in any session other than the console session. There is something about the console session that is causing the exe not to run properly... even though it does appear to start running the exe. I should also mention that everything was working fine until Monday at midnight, after which none of the executables could be run successfully. Nothing was changed on the server and no updates were installed. I have since installed windows updates, but that didn't change anything. Looking for some advice on how to get these executables working in the console session again. Thanks!

    Read the article

  • The boot selection failed because a required device is inaccessible 0xc000000e

    - by bbodenmiller
    A family member of mine recently went on vacation and turned off their computer, something they normally do not do, upon returning home it would not turn on and now returns the error message below. Generally friends and family come to me for help with computers and I have no problem, however this time I am a bit stumped. Any suggestions would be greatly appreciated. As you can see the error message is: Status: 0xc000000e Info: The best selection failed because a required device is inaccessible. Before going to this error message it briefly flashes the Windows loading screen. I have been able to confirm through the Windows RE Command Line and the dir command that the C: drive is accessible and likely is just suffering a bootup issue. I have tried: Launching the repair process discussed in the error message three times however each time it requires a restart and then returns to the same error message. Changing the boot order to be hard drive first Getting into safe mode; F8 just results in the same error message before I can get to the menu to select safe mode I have checked to make sure the BCD (bcdedit, Boot Configuration Data) is still intact as per https://www.symantec.com/business/support/index?page=content&id=TECH160475 I plan to try (but would like additional comments on): sfc /scannow; requires a restart and thus will likely result in the error message again A memory scan Bootrec as per http://support.microsoft.com/kb/927392#method1 Swapping IDE cables/ports Resetting the BIOS I noticed others with similar issues around the web are dual-booting however this machine is not setup in a dual-boot environment. Additionally at one point this error message supposedly showed up before I started working on the computer: The instruction at 0xfbe2584d referenced memory at 0x00000008. The memory could not be read. As previously stated any additional suggestions or words of advice would be greatly apprecaited.

    Read the article

  • XP machines on Domain not reporting WMI Data in a 2003 Server Environment

    - by Az
    I am running into a very quirky issue and I hope someone out there can help. We use a monitoring program for several networks we oversee that is WMI data dependent for a great deal of it's functionality. The Windows 2000 Professional workstations, as well as the 2003 servers in our network report WMI data fine, the Windows XP professional machines will not let me view them from within the WMI snap in for MMC (they return a Win32: Access Denied) error. I am of course logged in with an account with domain admin privileges on the domain controller when I attempt it. DCOM is enabled in component services, and the remote security option is set to allow as well. If we remove the machine from the domain and rejoin it, some workstations will show up as WMI enabled temporarily and then when I try to access them again later I get the access denied error again out of the blue. Hoping someone out there has had a similar problem or they have advice. I have had this problem with the firewall turned on or off. Thanks for your time! -Az

    Read the article

  • Vista Power Management GPO

    - by Matt
    Hi, I've created a loopback GPO that has several settings (both computer and user) including a Custom User Interface (Access 2007 Application) and Power Management (has the computer sleep after being idle for 2 min). I'm also filtering so that this policy does not apply to "Admins" - only to "Users". The problem I'm having is when the "Users" login the Power Management settings don’t work, but they do for "Admins". For testing I'm allowing the "Users" to launch Task Manager and use the Run line, so I'll run Explorer and look at Power Management and it shows the settings from my GPO. So I created a test OU with copies of the aforementioned GPO, but removed the Custom User Interface and found the Power Management settings do work for both the "Users" and "Admins". When I add the Custom UI the Power Management settings break for the "User" but continue to work for "Admins". Do the Power Management options need to have User Interface be "Explorer.exe"? Is this a bug or am I doing this the wrong way? BTW the tablets are using Vista SP2. Any insight or advice would be greatly appreciated. Thanks, Matt

    Read the article

  • Desktop SATA drives in SATA <-> FC array

    - by chris
    Let's assume you've got a box like one of these with space for 24 SATA disks. What are the best bits of advice for deploying this? For instance, should you be greedy and go for the 1.5 or 2tb disks or are they just not reliable enough to be used in an array like this and you should stick with 640gb or 750gb disks instead? Also, I know that FC (or generically, "enterprise class") disks have a different error recovery strategy than desktop disks. An enterprise disk will fail a read quickly and report to the controller that it wasn't able to read that block, and the RAID controller will quickly regenerate the info from the parity disk and mark the block as bad. A desktop disk, on the other hand, will try and try and try again to get the data, and in pathological cases this may cause a raid controller to fail the whole disk because the read operation times out. So there are a couple aspects to this question: What's the best sort of disk to get today? (ie specific disks on the market in Feb 2010) Generically, what should someone look for when trying to buy something like this that kinda walks the line between enterprise and consumer? Lastly -- is there anything that can be done with current "consumer" disks to make them more suitable for array use? IE can you use a SMART configuration to change the error recovery strategy used by the disk? Thanks!

    Read the article

  • SQL Server 2008 Express + Reporting Services on Windows 7

    - by TimothyP
    I'm trying to install SQL Server Express 2008 and Reporting Services on a x64 Windows 7 Machine for development purposes. I've installed SQL Server 2008 Express with the Microsoft Web Platform Installer I had to manually enable the SQL Server Browser in the Sql Server Configuration Manager and tried to enable the SQL Server Agent but that simply doesn't work. Keeps throwing an RPC error: "The remote procedure call failed. [0x800706be]". The start mode is set to Disabled and I cannot change it. Even though I selected the SQL Server Express with advanced services in the web platform installer I could not find any reference to SQL Server Reporting Services so I used the SQL Server Installation Center x64 application to "upgrade" to SQL Server Express 2008 with advanced services... this installed many things but still I couldn't find any reference to SQL Server Reporting Services other than an application called: "Reporting Services Configuration Manager" This opens up a dialog called "Reporting Services Configuration Connection" which is asking for a server name (shows the name of my machine) and a Find button. When I click the find button I get: "Unable to connect to the Reporting Server WMI provider. Details: Invalid Namespace". I found some references on the web to solve this problem, but they refer to a directory: "%ProgamFiles%\Microsoft SQL Server\MSRS10.SQL2008\Reporting Services\" which does not exist anywhere on my system. (The directories for SQL Server are there, but there is no Reporting Services directory anywhere). What am I doing wrong here? Wasn't the web platform installer supposed to handle all this? Thnx for any advice. PS: Most google results refer to 2005 vs 2008 problems, but I never had 2005 installed on this system, it's a newly installed development machine.

    Read the article

  • Cannot get libcurl-devl on OpenSUSE 11.3

    - by Dai
    I have a server running OpenSUSE 11.3 that I can't really upgrade to a newer version of OpenSUSE (it's a managed appliance). I have some PHP shell scripts that need to run on the server that have a dependency on both cURL and OpenSSL. I discovered that the PHP 5.3.3 binaries on the server did not include OpenSSL but did include cURL I downloaded the latest PHP sources, extracted them, and ran ./configure --with-openssl --with-zlib --with-bcmath --with-curl --with-readline --with-libxml --enable-sockets This failed: the configure script complained that it couldn't find cURL: checking for cURL support... yes checking for cURL in default path... not found configure: error: Please reinstall the libcurl distribution - easy.h should be in /include/curl/ I tried to install libcurl by running zypper install libcurl-devl This failed too: doom:~/phpworksite/php-5.5.15 # zypper install libcurl-devl Loading repository data... Warning: Repository 'Updates for openSUSE 11.3 11.3-1.82' appears to outdated. Consider using a different mirror or server. Warning: Repository 'openSUSE_11.3_Updates' appears to outdated. Consider using a different mirror or server. Reading installed packages... 'libcurl-devl' not found in package names. Trying capabilities. No provider of 'libcurl-devl' found. Resolving package dependencies... Nothing to do. However, libcurl-devl is listed when I run zypper search curl. doom:~/phpworksite/php-5.5.15 # zypper search curl Loading repository data... Warning: Repository 'Updates for openSUSE 11.3 11.3-1.82' appears to outdated. Consider using a different mirror or server. Warning: Repository 'openSUSE_11.3_Updates' appears to outdated. Consider using a different mirror or server. Reading installed packages... S | Name | Summary | Type --+-----------------------------+----------------------------------------------------------+-------- i | curl | A Tool for Transferring Data from URLs | package | curlftpfs | Filesystem for mounting FTP hosts using FUSE and libcurl | package | libcurl-devel | A Tool for Transferring Data from URLs | package i | libcurl4 | cURL shared library version 4 | package i | perl-WWW-Curl | Perl extension interface for libcurl | package i | php5-curl | PHP5 Extension Module | package | python-curl | Python module interface to the cURL library | package | python-curl-doc | Documentation for python-curl | package | xmms2-plugin-curl | Curl Support for xmms2 | package | xmms2-plugin-curl-debuginfo | Debug information for package xmms2-plugin-curl | package doom:~/phpworksite/php-5.5.15 # Here are the current repositories. doom:~/phpworksite/php-5.5.15 # zypper repos # | Alias | Name | Enabled | Refresh ---+----------------------------------------------+----------------------------------------------+---------+-------- 1 | PHP_extensions_(openSUSE_11.3) | PHP_extensions_(openSUSE_11.3) | No | Yes 2 | Packman_11.3 | Packman_11.3 | Yes | Yes 3 | Updates for openSUSE 11.3 11.3-1.82 | Updates for openSUSE 11.3 11.3-1.82 | Yes | Yes 4 | openSUSE_11.3_OSS | openSUSE_11.3_OSS | Yes | Yes 5 | openSUSE_11.3_Updates | openSUSE_11.3_Updates | Yes | Yes 6 | openSUSE_BuildService_-_devel:languages:perl | openSUSE_BuildService_-_devel:languages:perl | No | Yes 7 | repo-debug | openSUSE-11.3-Debug | No | Yes 8 | repo-non-oss | openSUSE-11.3-Non-Oss | Yes | Yes 9 | repo-oss | openSUSE-11.3-Oss | Yes | Yes 10 | repo-source | openSUSE-11.3-Source | No | Yes BTW, I did try building PHP without cURL, however it broke a lot of things, so apparently I really need cURL. My question: how can I install libcurl-devl (or just install cURL) so that I can build PHP?

    Read the article

  • Connection speed drops from 1 Gbps to 10 Mbps (Vista 64)

    - by Kevin Hakanson
    I recently got a Windows Home Server (HP MediaSmart Server EX490) setup so I could do backups and other things. However, I am having trouble on my Vista 64 PC. The backup will be making great progress, then it will just slow down. At one point, I noticed the lights on my Netgear GS105 indicated it was not using a 1000 Mbps connection, but a 10 Mbps one. I checked the Status of Local Area Connection (Intel(R) 82567V-2 Gigabit Network Connection) and that also showed the same slow speed. This has happened several times in the last couple days. When I disabled the network device, and then enabled it, it established the 1 Gpbs connection again. However, some of the times the Sent Bytes Activity on the Status windows indicate that the data flow is still slow (100 to 1000 bytes every couple seconds). Obviously, at this rate I could backup faster to floppy disk. :) My question is how to diagnose and fix this problem. When I look at the Administrative Events, I do a Errors: Bonjour Service 456: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.) And a Warning: e1yexpress Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected. I am suspicious there is some power saving mode. I found a post suggesting System Idle Power Saver(SIPS) may be the issue. I am going to try that, but looking for other suggestions or diagnostic advice. I have several new items in this configuration: server, client software, switch and cat6 cables.

    Read the article

< Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528  | Next Page >