Search Results

Search found 23603 results on 945 pages for 'non technical manager'.

Page 522/945 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

  • Does anyone provide a Skype connection service?

    - by Runc
    Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

    Read the article

  • No compatible network card

    - by sbintcliffe
    Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

    Read the article

  • Windows SBS 2011 DNS Role (service) failing & needing restarting

    - by HaydnWVN
    Have a Windows SBS 2011 with Exchange that is handling all DNS for the network. Since getting a 3rd party (Hardware & Support) to setup a recieving FTP service and restricting Exchanges memory useage for another 3rd party product (Stock software) the local network seems to periodically 'lose the internet connection'. Delving deeper I found that the DNS service is somehow failing/stopping without the actual service on the server reporting such (nothing in event logs). A simple restart of the 'DNS Role' on the server solves the problem. The manager onsite reports that he has to do this most days in the afternoon - yet not at the same time and other days it works fine without a restart being required. I'm unable (lacking sufficient SBS2011 knowledge) to diagnose this further, ideally I would like the DNS Role to report (and log) the failure, then automatically restart itself.

    Read the article

  • How to make security group in one forest show up in another forest?

    - by Jake
    I have two Win2k8 forests which I do maintenance on. The two forests have full 2 way external, non transitive trust with each other. I have a folder in forest X, domain countryX.mycompany.com accessible ONLY by the global security group named $group. In forest Y, domain countryY.mycompany.com, countryY\user1, countryY\user2 etc needs to have access to the folder. The natural instinct is to put user1, user2 etc into the $group. However, none of the methods for adding user to group works as it appears that the AD cannot find the groups in the other forest. Question: 1.How to make forests see each other's security groups and be able to add? 2.In practice, what is the recommended way to achieve the user access to the folders/files in another forest?

    Read the article

  • Trouble installing php memcache extension

    - by user35346
    I'm trying to install memcache on MAMP but I get the warning below, and when I continue it seems to complete properly. I add the line extension=memcache.so to the php.ini and restart MAMP but phpinfo() doesn't list the memcache extension. $ ./pecl install memcache downloading memcache-2.2.5.tgz ... Starting to download memcache-2.2.5.tgz (35,981 bytes) ..........done: 35,981 bytes 11 source files, building WARNING: php_bin /Applications/MAMP/bin/php5/bin/php appears to have a suffix 5/bin/php, but config variable php_suffix does not match running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 Enable memcache session handler support? [yes] : yes ... Build process completed successfully Installing '/Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.5 configuration option "php_ini" is not set to php.ini location You should add "extension=memcache.so" to php.ini

    Read the article

  • Slower than expected 802.11n wireless network speeds

    - by Ian
    I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

    Read the article

  • Separating user resources - Windows Server 2008 (Terminal Server)

    - by Christopher Wilson
    At the moment I am running a Windows Terminal Server 2008 for around 10 clients that use the server to run programs and access data. Is there anyway to separate the resources of each user so that they do not impact each other in terms of resources. User 1: Opens program User 2: Notices slow down I have looked into using Windows System Resource Manager but do not know if it provides what I need and if there are any other 3rd party tools that also provide this functionality. Any answer is appreciated. Server Specs: HP ProLiant ML110 G7 Processor: Intel® Xeon® E3-1220 (4 core, 3.1 GHz, 8MB, 80W, 1333/t) RAM: 12GB DDR3 ECC 1TB HDD

    Read the article

  • Windows server 2008 R2 IIS7 file permissions

    - by StealthRT
    Hey all i am trying to figure out why i can not access a index.php file from within the wwwroot/mollify/backend directory. It keeps coming up with this: Server Error 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. I've given all the permissions (Full control) to the wwwroot directory i could think of (IUSR, Guest, GUESTS, IIS_IUSRS, Users, Administrators, NETWORK, NETWORK SERVICE, SYSTEM, CREATOR OWNER & Everyone). I also added index.php to the "Default Document" under my website settings in IIS 7 manager. What else am i missing? Thanks! David

    Read the article

  • Rewind print job under Windows Server 2008

    - by FooLman
    Hello, We are in the transition from Novell NetWare to Windows server 2008. In case of the printer server we print jobs thousands of pages long. NetWare printer manager has a handy function which allows to rewind a print job to a specified page. In case of a paper jam at the 750 page on a 800 page document this is really convenient. Does anybody know if there is a solution for this? The lists printed are in plain ascii lists with printer command characters embedded, and we are using dot matrix printers. Thanks for any help or suggestion. Regards.

    Read the article

  • Files listed by bash but unaccessible

    - by Cerin
    What would cause the following behavior on an Ubuntu 12.04 system? I've SSHed into a machine as the "ubuntu" user. Running ls -lah /data/* shows dozens of non-empty files (e.g. file1.txt, file2.txt, etc), all owned by the "ubuntu" user/group, and with full read/write access. If I try to cat /data/file1.txt, bash gives me the error "cat: /data/file1.txt: No such file or directory" In short, ls is listing files, but in every other way, the files essentially don't exist. I can't cat them or read them in any way. Even giving all the files 777 permission doesn't change anything. This is really bizarre. What's going on here?

    Read the article

  • I want to change hard drive. How to move system partition with Windows 7?

    - by Semyon Perepelitsa
    I've bought a new hard drive and want to move all my data to it. I had no problem with moving all files on non-system partition. But I don't know how to move system partiton. Now I have 3 partitions on the new disk, fist two was created by Windows installation CD (I tried to move system using internal tools, but it didn't work for me), third is filled with my successfully transferred data from old disk. And there are two partitions on the old disk: the first one is system (Windows 7) and the second one is my old main storage, that I already moved to the new hard drive and now it is empty. How can I change the placement of Windows 7 with minimal difficulties and losses, so I could work on the new hard drive just as I did it on the old one?

    Read the article

  • Use all 5.1 speakers with a 2.1 audio source

    - by thegreyspot
    Hi! I just bought a 5.1 surround sound speaker set for my computer in my bedroom. The rear speakers are next to me in bed while the front speakers are at the other end of the bed at my feet. While I enjoy the surround sound during movies that support 5.1 sound, I would like to have my rear speakers working when listening to podcasts, or other 2.1 channel sound. How can I do this? When I enable "Speaker Fill" in the Realtek Hd Audio manager the sound only comes out of the front and center speakers with a few background noises that come out the rear ones. But since my ears are closer to the rear speakers, I'd rather have the sound come out of them. Let me know of any ideas! Hmm seems like the only option is to set the rear speakers to "Front Speakers" and change it to stereo in the Realtek HD audio. But still that take alot of steps and it doesnt not use the center speaker Thanks

    Read the article

  • Recover Intel Matrix Raid Configuration

    - by Catalin DICU
    Hello, I had 2 HDDs in Intel Matrix Raid configuration on a motherboard with intel ICH9R. I had some RAID 0 partitions and one RAID 1 partition. Somehow when replacing my videocard I partially unpulugged the power connector from one of the HDD. I booted and only one disk was showing. So I turned off the PC and correctly plugged the power connector and how both HDDs are showing as "Non-Raid Disk" Is there a way to restore the raid configuration from before ? In fact I don't really remember how my partitions where configured, I had 2x100Gb + 1x296Gb in RAID 0 and one 50Gb in RAID 1 (using 2x320Gb HDDs) but I'm not sure how many volumes and how the partitions where allocated on the volumes. Is there a tool to find that ? Thanks

    Read the article

  • Mac Mini 1.66 no sound on Windows 7

    - by Steph
    I've tried everything I could to get the sound working. I've tried to install the drivers from the Snow Leopard disk, then I went and got the latest RealTek drivers from the RealTek website. Then I read that old Mac mini's could have an integrated Cirrus chip, and I tried to grab the latest driver from the website, and it appeared to install, but nothing. There's also nothing listed under Sound and ... in the Device Manager. I've tried to manually include a legacy driver, which worked for RealTek but not for the Cirrus driver. Of course it said there was no RealTek hardware install, which makes me think it's a Cirrus chip. Any further suggestions or thoughts would be really appreciated. This is a Mac Mini 1.66. I'm also not sure how to be able to detect what card is integrated into the system, so that would be helpful too (remembering that there's no driver installed). Even just to get the chip type would be great to confirm.

    Read the article

  • Reset Network Load Balancer Connection Pool

    - by bill_the_loser
    I am currently working on load testing a web application on a virtual machine cluster. I am looking for a way to flush the connection pool / NLB cache so that it is like each machine connecting to the NLB is connecting for the first time and doesn't get directed back to the node that it was on last time. This a Windows 2003 Server cluster, behind a Microsoft software based Network Load Balancer. Additional Information: To do the load testing I'm using virtual machines, one for each node on the cluster. Somehow I got two virtual machines connecting to the same node and I'm looking for an easier way to reset those connections without going in to the NLB Manager and stopping and starting each node on the NLB. Update: We went ahead and changed the affinity on all of the nodes of the cluster to none. Now it's a non-issue.

    Read the article

  • Bluetooth not seeing mouse (Fedora)

    - by Chris
    I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

    Read the article

  • selective backup script in bash

    - by Sake
    Hi, I've been using this simple command (that's all I can do :) to backup the whole tree from my user data in NAS server for a year. cp -r /STORAGE /BACKUP-STORAGE/YYYY-MM-DD Unfortunately, after a year of service. My user start filling the spaces with lot of photo and cliparts (jpg, gif, bmp) And that start to make my backup process get much slower. The space is also a big issue. Now I no longer have enough space for a week-long daily backup set. I think I want to change from backup everything to backup only non-image data. How can I exclude jpg, gif, and bmp from the backup ? It's quite easy with DOS XCOPY command, but I really have no idea how to do that in bash. Thanks

    Read the article

  • Is there any way to play Netflix (stream) in Windows Media Player 11?

    - by Not So Sharp
    Googling for a solution yields a ridiculous page on eHow that instructs to insert a DVD from Netflix. But I am not interested in the DVD option. I am only interested in streaming and unfortunately none of my browsers (IE, FF, Chrome) uses the hardware acceleration built into my video card. The only way I can play non-choppy video on my PC is via Windows Media Player, but WMP doesn't list Netflix as one of the supported online stores for some reason. Any idea or trick how stream Netflix on WMP 11 instead of a browser?

    Read the article

  • Problems in Linux Mint 13 MATE with NTFS partitions

    - by usr
    I'm using Linux Mint 13 MATE (32 bit). With Caja file manager (based on Nautilus 2.x) I can create, modify and remove folders and files on NTFS partitions whitout problems. But, for example, when I have a compressed file (.zip, .7z, ...) in a NTFS partition I can't extract it (with File-Roller, Peazip, ...). But I can extract the same file in a ext4 partition perfectly. What might the problem be? Are there (maybe) file permissions for each application?

    Read the article

  • Re-deploy Reports on SCOM Management Packs

    - by Gabriel Guimarães
    I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Thanks in advance.

    Read the article

  • Basic video editor for AVCHD Lite files?

    - by davr
    I have a camera (Panasonic Lumix GF-1) that outputs "AVCHD Lite" files, 720p h264 in a MTS container. I saw this question that said Movie Maker in Windows 7 supports AVCHD...but I just tried, and unfortunately it does not support AVCHD Lite. Are there any free or inexpensive non-linear video editors (NLE) that can natively handle AVCHD Lite files, without requiring some 3rd party driver? If not, are there any 3rd party drivers that are especially stable? (In my experience they usually have some problems...I got AVCHD Lite loading into VirtualDub using a 3rd party plugin, but it's very slow and sometimes crashes, and seeking takes ages.

    Read the article

  • Wireless driver not detected by Windows 8

    - by rksh
    I've a problem in my wireless driver on windows 8. I bought a new X500L Asus laptop and installed windows 8 on it. However the driver CD I got with the laptop doesn't support my laptop. The CD says it's designed for Windows 8.1. I tired finding Wireless driver model and finding driver online and installing and that hasn't worked either, the wireless driver is shown at the device manager as not installed. I tired live booting the computer with a live CD of Linux and that also doesn't pick up my wireless driver. Can anyone tell me how to fix it? Thanks

    Read the article

  • Online Backup strategy for family individuals

    - by marlon brando
    The majority of my family, including myself, uses Dropbox and Syncplicity free accounts for our syncing needs. However our backup strategy is pretty non-existent, we all have access (via webDav) to our qnap nas located at home, however we copy files accross when we can remember to do so, terrible I know. Is there tools like CrashPlan or Spideroak that allows each the accomodation of each family members syncing and back-up needs under one main account? I'm not sure how this would work, as each family member would need a seperate sub-account or would I manage each computer's syncing and backup lists from a single account? Any thoughts?

    Read the article

  • Fixing sticky keys without removing the keys?

    - by Earlz
    Hello, we had an E-Machine netbook brought in today that has sticky keys. (don't ask me why we said we'd fix it) Well, I've looked at a few howtos for fixing it, but they all require removing the keys. When I tried to remove the keys, I got the key to like a 45 degree angle and it still didn't budge, so I'm pretty sure the keys are non-removable. Is it common for places to even be able to find a replacement keyboard for netbooks and is there a way to fix sticky keys without removing the keys?

    Read the article

  • PHP 5.2.11: Unable to load dynamic library complaints

    - by OldTroll
    I installed PHP 5.2.11 and upon enabling the php_mssql.dll module (and the obligatory restart of the services) started receiving warnings about not being able to load the dynamic library. The operating environment is IIS ISAPI under Windows 2003 R2. Here is the list of things that were checked File Exists in \PHP\ext directory and has the same timestamp as the other distribution delivered libraries. Permissions are correct to the file. Other extensions are enabled and functioning with identical permissions. ntwdblib.dll has been copied from a SQL Server 2005 installation (per php.net's requirements for the module) Other modules before and after the php_mssql entry are working. I've also stripped down and remove all non-essential references with detectable improvements. I turned up logging and enabled all the error logs in the php.ini, nothing is generated by the logs. Searching Google has turned up a slew of closed/unsolved bug reports on php.net and some miscellaneous near-matches, none of which have really addressed the problem or lead to any inspirations.

    Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >