Search Results

Search found 21392 results on 856 pages for 'audio output'.

Page 524/856 | < Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >

  • Why is my USB data transfer so slow?

    - by Dave M G
    Whenever I do any kind of file transfer using USB, whether to a USB stick, or with my Android phone, or anything else, it is ridiculously slow. It says 59.8 KB/sec, which would be an awesome speed if this were 1991 and I was using a modem to dial up to my local BBS. Surely USB technology is better than that...? 37 seconds to move less data than the equivelent of 1 MP3 file? Also, regardless of what it says about speed and time, the reality is much, much slower. I routinely see it say something like "37 seconds left" and have to wait for minutes. Sometimes, if I want to move large amounts of files, it can say it will take 8 hours or more. Is this normal? My computer may not be the most awesome on the market, and about a year old, but it's an i5 with 4GB RAM and modern components, so surely this isn't the hardware's fault. What can I do to get better USB data transfer performance? Also, I did look at this question, but my newbie eyes don't see anything that look like an actual solution, just a lot of discussion about what transfer rates could or should be. Update: As requested in the comments, I've generated a whole bunch of output from the command line, and put it on Ubuntu Pastebin. Please see it here.

    Read the article

  • 3 Monitors 1 graphic card

    - by Michael
    I have a Nvidia GT 120 graphic card. It has a vga, dvi and hdmi output. Can I have 3 monitors with this? One for each port. Also if not, can I use dvi and hdmi and have 2 monitors. I know I can do 2 with the vga and dvi but I am wondering about dvi and hdmi. Also my last question is, if I can have 2 monitors with the dvi and hdmi, can I use a hdmi to dvi and still have the same success? Thanks

    Read the article

  • Repeat the csv header twice without "Append" (PowerShell 1.0)

    - by Mark
    I have prepared a PowerShell script to export a list of system users in CSV format. The script can output the users list with Export-csv with single header row (the header row at top). However my requirement is to repeat the header row twice in my file. It is easy to achieve in PowerShell 3.0 with "Append" (e.g. $header | out-file $filepath -Append) Our server envirnoment is running PowerShell 1.0. Hence I cannot do it. Is there any workaround? I cannot manually add it myself. Thank you.

    Read the article

  • ATI driver in Fedora linux 11

    - by unknown (google)
    I recently built a pc with an ATI Radeon HD 5750. I have installed Fedora 11 and installed the device driver for the Radeon 5700 series proprietary drivers. I wanted to see if there is graphics hardware acceleration. I typed in glxinfo at the terminal and I got: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 14 Current serial number in output stream: 14 I don't know how to fix this. I tried to go to the ATI Catalyst Control Center; that worked, but the ATI Catalyst Control Center (Administrator) doesn't work. If anyone knows how to fix this problem then please let me know. Thanks

    Read the article

  • Close lid option "Do nothing" absent

    - by Jaap
    I just unpacked my new Sony Vaio, with windows 8 pro installed. Everything is nice, so I tried setting my power management options. The "When I close the lid" option only list: Hibernate Sleep Shutdown The "Do nothing" option is not present. I've seen loads of stuff on google where people ask or explain how to set this option to "Do nothing", but in all my power plans this option is absent... Can I use a tool to prevent this, or is there a way to force windows to show me this option (and that it actually works)? UPDATE powercf /q guid gives me this output: Subgroup GUID: 4f971e89-eebd-4455-a8de-9e59040e7347 (Power buttons and lid) GUID Alias: SUB_BUTTONS Power Setting GUID: 5ca83367-6e45-459f-a27b-476b1d01c936 (Lid close action) GUID Alias: LIDACTION Possible Setting Index: 000 Possible Setting Friendly Name: Sleep Possible Setting Index: 001 Possible Setting Friendly Name: Hibernate Possible Setting Index: 002 Possible Setting Friendly Name: Shut down Current AC Power Setting Index: 0x00000000 Current DC Power Setting Index: 0x00000000 Other sections have different enumerations where 000 stands for No action

    Read the article

  • Stream tar.gz file from FTP server

    - by linker
    Here is the situation: I have a tar.gz file on a FTP server which can contain an arbitrary number of files. Now what I'm trying to accomplish is have this file streamed and uploaded to HDFS through a Hadoop job. The fact that it's Hadoop is not important, in the end what I need to do is write some shell script that would take this file form ftp with wget and write the output to a stream. The reason why I really need to use streams is that there will be a large number of these files, and each file will be huge. It's fairly easy to do if I have a gzipped file and I'm doing something like this: wget -O - "ftp://${user}:${pass}@${host}/$file" | zcat But I'm not even sure if this is possible for a tar.gz file, especially since there are mutliple files in the archive. I'm a bit confused on what direction to take for this, any help would be greatly appreciated.

    Read the article

  • Connect to a particular network connection from terminal

    - by RanRag
    I am currently using Reliance netconnect USB modem. The problem I am facing is my USB modem disconnects itself at 22:00 PM IST everyday. Now, sometimes what I do is start some downloading and leave my laptop for 2-3 hours in this case if my network disconnects it is a problem for me. So, what I used to do in windows is make a python script and execute rasdial myconnection_name to automate the connection process in my absence. Now I want to achieve something similar in linux. So, what are my alternatives for rasdial like tool in linux to automatically connect to a particular connection . I am using ubuntu 12.04 and here is my nm-tool output.

    Read the article

  • Looking for Unix tool/script that, given an input path, will compress every batch of uncompressed 100MB text files into a single gzip file

    - by newToFlume
    I have a dump of thousands of small text files (1-5MB) large, each containing lines of text. I need to "batch" them up, so that each batch is of a fixed size - say 100MB, and compress that batch. Now that batch could be: A single file that is just a 'cat' of the contents of the individual text files, or Just the individual text files themselves Caveats: unix split -b will not work here as I need to keep lines of text intact. Using the lines option is a bit complicated as there is a large variance in the number of bytes in each line. The files need not be a fixed size strictly, as long as it's within 5% of the requested size The lines are critical, and should not be lost: I need to confirm that the input made its way to output without loss - what rolling checksum (something like CRC32, BUT better/"stronger" in face of collisions) A script should do nicely, but this seems like a task someone has done before, and it would be nice to see some code (preferably python or ruby) that does atleast something similar.

    Read the article

  • Problem with php and apache

    - by user47587
    I am having trouble using the php module with apache2. At the moment, testing with a phpinfo script, only php code is displayed as though it were text, no output at all. I have the line LoadModule php5_module libphp5.so, with an absolute path. Yet, when I do apache2 -t -D DUMP_MODULES |grep php, nothing is reported I have my error level set to warn, and the last entry in my logfile after apache starts is [notice] Apache/2.2.15 (Unix) PHP/5.2.12 mod_ssl/2.2.15 OpenSSL/0.9.8g configured -- resuming normal operations Which implies there is php support?

    Read the article

  • Search for specific call in asterisk log files

    - by chiborg
    In my Asterisk log file, I have a line like this (truncated): Executing [123@mycontext:1] Set("SIP/myhost-b7111840", "__INCOMINGCLI=4711") Now I want to do the following filtering while looking at the log file with tail -f: Match lines with a specific value for "INCOMINGCLI", storing the call ID (the "SIP/myhost-b7111840" part) Output all subsequent lines that contain the call ID. As a bonus, having a grep-like option like -A would be nice. I could do that easily in various programming languages, but how would I do it with standard UNIX commands like sed or awk? Can it be done with these commands?

    Read the article

  • How to tell from what Ubuntu or Debian repository a package comes?

    - by gotgenes
    On a Debian-based system, including Ubuntu, how can one tell which repository a package will be downloaded from, without actually beginning the download? aptitude show and apt-cache info will show the section (e.g., metapackage, base, graphics), but not the repository to which a package belongs (e.g., http://ppa.launchpad.net/mactel-support/ppa/ubuntu or http://us.archive.ubuntu.com/ubuntu/). When installing the package, the actual repository appears during the download (it is printed out in the "downloading from ..." output from apt and similar programs), but how can one obtain information on the repository containing the package (or a specific version of a package) without downloading and installing it first? Additionally, how can one determine the source repository for a package that is already installed?

    Read the article

  • crontab still sending emails even with > /dev/null

    - by user2344668
    I have a crontab (root) that runs a script and output is set to /dev/null but I always get the emails whenever it runs. I only want to receive error emails. # Rackspace driveclient update (12pm MST) 0 12 * * * /root/scripts/driveclient-update > /dev/null The only way I can get it to turn off is to use /dev/null 2&1 but then I won't get error emails. This is happening on three different CentOS servers, two are 6.3 and one is 6.4. NOTE: I have read over and over that /dev/null is supposed to send stdout there and prevent the email if there is nothing but stdout from the script, so at works for at least some people; I cannot figure out why it is not working on these servers. Here's an example of where /dev/null is supposed to work: http://www.alphadevx.com/a/384-Suppressing-Cron-Job-Email-Notifications

    Read the article

  • Query Performance Degrades with High Number of Logical Reads

    - by electricsk8
    I'm using Confio Ignite8 to derive this information, and monitor waits. I have one query that runs frequently, and I notice that on some days there is an extremely high number of logical reads incurred, +300,000,000 for 91,000 executions. On a good day, the logical reads are much lower, 18,000,000 for 94,000 executions. The execution plan for the query utilizes clustered index seeks, and is below. StmtText |--Nested Loops(Inner Join, OUTER REFERENCES:([f].[ParentId])) |--Clustered Index Seek(OBJECT:([StructuredFN].[dbo].[Folder].[PK_Folders] AS [f]), SEEK:([f].[FolderId]=(8125)), WHERE:([StructuredFN].[dbo].[Folder].[DealId] as [f].[DealId]=(300)) ORDERED FORWARD) |--Clustered Index Seek(OBJECT:([StructuredFN].[dbo].[Folder].[PK_Folders] AS [p]), SEEK:([p].[FolderId]=[StructuredFN].[dbo].[Folder].[ParentId] as [f].[ParentId]), WHERE:([StructuredFN].[dbo].[Folder].[DealId] as [p].[DealId]=(300)) ORDERED FORWARD) Output from showstatistics io ... Table 'Folder'. Scan count 0, logical reads 4, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Any ideas on how to troubleshoot where these high logical reads come from on certain days, and others nothing?

    Read the article

  • IPP Printing from Windows 7 Ultimate

    - by Casey
    I have network IPP working on Ubuntu and Windows XP. On my Windows 7 instance, it refuses to acknowledge the remote server connection. Can anyone suggest how to configure this correctly? My install steps are: Add Printer Add a Local Printer Create a New Port and "Standard TCP/IP Port" Enter hostname http://host:631/printers/Printer_Name After that it says the printer is not detected, asks me to pick a driver, and finish up. Trying to use the device does not produce any output? If anyone has got this work, I would really appreciate a fix.

    Read the article

  • How can I make a non-destructive copy of a (NTFS) partition?

    - by violet313
    I want to recover some deleted files from a healthy NTFS partition on an undamaged hard-disk. In order to leave the partition undisturbed, i plan to use dd to clone the partition to a raw image file & then attempt recovery from that mounted clone. Will dd if=/dev/sd<xn> of=/path/to/output.img perform a non-destructive copy ? Is attempting a restore from a clone using dd the best approach? [edit, wrt Deltiks answer, i need to be a bit clearer about what i'm asking] eg: are there some s/w that can do something more with the original sectors ? eg: if it was a damaged hard-disk i am aware that any kind of read is potentially destructive. but assuming my disk head is not going to suddenly spaz out etc, am i reducing my chances of a successful recovery (at any cost) by using an apparently non-destructive single read of my undamaged hard-disk. (btw: i am planning on using ntfsundelete & testdisk for recovery)

    Read the article

  • How to setup my texture cordinates correctly in GLSL 150 and OpenGL 3.3?

    - by RubyKing
    I'm trying to do texture mapping in GLSL 150 and OpenGL 3.3 Here are my shaders I've tried my best to get this correct as possible hopefully this is :) I'm guessing you want to know what the problem is well my texture shows but not in its fullest form just one section of it not the full texture on the quad. All I can think of is its the texture cordinates in the main.cpp which is at the bottom of this post. FRAGMENT SHADER #version 150 in vec2 Texcoord_VSPS; out vec4 color; // Values that stay constant for the whole mesh. uniform sampler2D myTextureSampler; //Main Entry Point void main() { // Output color = color of the texture at the specified UV color = texture2D( myTextureSampler, Texcoord_VSPS ); } VERTEX SHADER #version 150 //Position Container in vec3 position; //Container for TexCoords attribute vec2 Texcoord0; out vec2 Texcoord_VSPS; //out vec2 ex_texcoord; //TO USE A DIFFERENT COORDINATE SYSTEM JUST MULTIPLY THE MATRIX YOU WANT //Main Entry Point void main() { //Translations and w Cordinates stuff gl_Position = vec4(position.xyz, 1.0); Texcoord_VSPS = Texcoord0; } LINK TO MAIN.CPP http://pastebin.com/t7Vg9L0k

    Read the article

  • How to set the laptop screen brightness programatically?

    - by zls
    I'm currently migrating to openbox without gnome session. In unity i can use the vendor keys to set the screen brightness, but in openbox I'm on my own. /sys/class/backlight/acpi_video0/brightness works fine, the problem is that I need sudo to set the brightness and that wouldn't work with keyboard mappings. xbacklight -get/set doesn't do or output anything. I don't really want to use xrandr --brightness. Are there any other options or a way to fix the problems with xbacklight or acpi_video0 ?

    Read the article

  • How to filter Varnish logs based on XID?

    - by Martijn Heemels
    I'm running into infrequent 503 errors which appear hard to pinpoint. Varnishlog is driving me mad, since I can't seem to get the information I want out of it. I'd like to see both the client- and backend-communications as seen by Varnish. I thought the XID number, which is logged on Varnish's default error page, would allow me to filter the exact request out of the logging buffer. However, no combination of varnishlog parameters gives me the output I need. The following only shows the client-side communication: varnishlog -d -c -m ReqStart:1427305652 while this only shows the resulting backend communication: varnishlog -d -b -m TxHeader:1427305652 Is there a one-liner to show the entire request?

    Read the article

  • Problem Activating “Windows Communication Foundation Non-HTTP Activation” feature in Windows 7

    - by Escobar5
    Hello, I'm having the following problem. I'm installing SharePoint 2010 Beta so I need to activate the windows feature "Windows Communication Foundation Non-HTTP Activation". The problem is I cannot activate it, i get the message: "An error has occurred. Not all features were successfully changed" When i look at the log (C:\Windows\Logs\CBS\CBS.log) I found this error: Process output: [l:186 [186]"SMConfigInstaller[Error]: Failed in calling 'StartService' for service 'NetTcpActivator'. Error code: 0x8007042c Anyone can give me a clue of what is happening here?

    Read the article

  • Trouble installing gnome-shell-extensions-user-theme, dependency/PPA conflict?

    - by Drex
    I installed gnome tweak tool, and am trying to set up custom themes and whatnot. So, trying to install gnome-shell-extensions-user-theme. me@computer:~$ sudo apt-get install gnome-shell-extensions-user-theme [sudo] password for me: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gnome-shell-extensions-user-theme : Depends: gnome-shell-extensions-common but it is not going to be installed E: Unable to correct problems, you have held broken packages. Not going to be installed? Okay, let's see about that... me@computer:~$ sudo apt-get install gnome-shell-extensions-common Reading package lists... Done Building dependency tree Reading state information... Done gnome-shell-extensions-common is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Wait, what? Broken packages? Ruh Roh! Seems to me it might be a PPA contradiction problem or something, but I'm tired of trashing my installs. Kinda lost here. Any ideas? Output of sudo apt-get install -f drex@U110:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

    Read the article

  • recovering raid 0 hard disk

    - by Hiawatha
    I bumped to a huge (for me) problem. I was running dual boot system (win 7 / linux) and at some point I decided to test fedora ( I am new in Linux ). My hard disk conf: 3 hard disks each 1 TB, 2 set to raid 0 with windows running on it and 1 for linux. After installing it from live usb I found out that windows 7 is not in grub anymore and while booting shows raid error. I installed back Ubuntu and ran Disk Utility and checked now I have one disks (raid 0) failed (READ) error. First has 5 bad sectors and second has 1 bad sector. And now I dont know what to do and how to repair. further I dont know which data i could provide to get help. I tried ntfsfix and got this output: Mounting volume... NTFS signature is missing. FAILED Attempting to correct errors... NTFS signature is missing. FAILED Failed to startup volume: Invalid argument NTFS signature is missing. Trying the alternate boot sector Unrecoverable error Volume is corrupt. You should run chkdsk. #sudo ntfs-3g -o force,rw /dev/sdb /media/windows NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

    Read the article

  • Table 'mysql.host' doesn't exist

    - by eriktm
    100913 10:21:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql /usr/local/mysql/libexec/mysqld: Table 'mysql.plugin' doesn't exist 100913 10:21:29 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 100913 10:21:29 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 100913 10:21:29 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended This is the output from the log-file for mysqld I get when I try to start mysqld with the mysqld_safe command. I tried to run mysql_upgrade to correct the first error, but this command seems to require the server to be started, which is my original problem. Next, it says that the table mysql.host does not exist. I was unable to figure out what this is caused by.

    Read the article

  • loading a heightmap as texture in shader

    - by wtherapy
    I have a height map of 256x256, containing, foreach cell, not only height as a normal float value ( not 0-1 ) and also 2 gradient values ( for X and Y ), also as normal float values ( not 0-1 ). I have uploaded the texture via normal texture loading: glEnable( GL_TEXTURE_2D ); glGenTextures( 1, &m_uglID ); DEBUG_OUTPUT("Err %x\n", glGetError()); glBindTexture( GL_TEXTURE_2D , m_uglID ); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexImage2D( GL_TEXTURE_2D, 0, GL_RGB32F, unW + 1, unH + 1, 0, GL_RGB, GL_FLOAT, pvBytes ); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_LINEAR); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_LINEAR); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); DEBUG_OUTPUT("Err %x\n", glGetError()); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); DEBUG_OUTPUT("Err %x\n", glGetError()); as a parenthesis, the debug output is: Err 500 Err 0 Err 0 Err 0 Err 500 Err 500 Err 0 Err 0 pvBytes is a 256x256 array of typedef struct _tGradientHeightCell { float v; float px; float py; } TGradientHeightCell, *LPTGradientHeightCell; then, m_ugl_HeightMapTexture = glGetUniformLocation(m_uglProgram, "TexHeightMap"); I load it via: glEnable(GL_TEXTURE_2D ); glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D , pTexture->GetID()); glUniform1i(m_ugl_HeightMapTexture, 0); in shader, I just access it: uniform sampler2D TexHeightMap; vec4 GetVertCellParameters( uint i, uint j ) { return texture( TexHeightMap, vec2( i, j ) ); } vec4 vH00 = GetVertCellParameters( i, j ); My problem is that, when passing negative values in one of the values in TGradientHeightCell ( v, px, py ), the texture is corrupted. I need the values to be passed exact as I have them in memory. Any help appreciated.

    Read the article

  • Viewsonic Monitor Resolution - Drivers are not working

    - by ravidev
    I have Viewsonic va1716w monitor which has VGA/D-SUB video input. I bought new Motherboard Intel DH67GD which has HDMI & DVI output. I connect my motherboard to monitor using DVI to VGA connector. It's working. Yesterday I installed windows 7 OS and also installed monitor drivers(downloaded from viewsonic site - signed version) When i set display resolution to 1440 x 900. It's not setting it.it sets back to 800x600. What should i do to make resolution to 1440x900 (monitor resolution)? DVI to VGA causing this problem or i need to do any trick? Any link to download drivers Please guide me.. Thanks in advance !!

    Read the article

  • Bug: unable to handle kernel NULL pointer dereference at

    - by maria
    I have recently installed new system on my disc, Ubuntu 12.04. Installation proceeded without problems, I started installing additional software and put data from other discs. I had already two times bug report, it was quite long, and I have no idea how to acces to log file (which probably is somewhere saved) and since I had to switch off the computer using the button, anything else was possible, here is just a small part of it (what I've noted on paper) could not write bytes: Broken pipe speach dicpatcher disabled: edit etc/default/speach-dispatcher saned disabled: edit .... and than: BUG: unable to handle kernel NULL pointer dereference at 0000009c I've run Memory test in GRUB, everything is fine. First time it occured when I was using rsync, second time when I was trying to install texlive. Should I install whole system once again? Or can it be hardware problem? Or something else? If there is any hardware details which may be relevant, please ask, since I have no idea what is happening, I don't know what kind of information could be useful. Thanks P.S. dmesg output:

    Read the article

< Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >