Search Results

Search found 16386 results on 656 pages for 'flash drive'.

Page 524/656 | < Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >

• Cheapest server to run Windows 2008 R2?

  - by chopps

  Hey Everyone, I want to build a really cheap server to use for testing etc but don't want to spend alot of dough. Any recomendations on what kind of home pc/server would work for these requirements? Any place to get refurbs at a good price? Component Requirement Processor Minimum: 1.4 GHz (x64 processor) Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-Based Systems Memory Minimum: 512 MB RAM Maximum: 8 GB (Foundation) or 32 GB (Standard) or 2 TB (Enterprise, Datacenter, and Itanium-Based Systems) Disk Space Requirements Minimum: 32 GB or greater Foundation: 10 GB or greater Note: Computers with more than 16 GB of RAM will require more disk space for paging, hibernation, and dump files Display Super VGA (800 × 600) or higher resolution monitor Other DVD Drive, Keyboard and Microsoft Mouse (or compatible pointing device), Internet access (fees may apply)

  Read the article

• Only some motherboards can support faster RAM?

  - by Wesley

  This is a question relating to one of my builds. Here are the specs: ECS P4VXASD2+ V5.0 motherboard Intel P4 Northwood 2.8 GHz (533 MHz FSB, 512 KB L2) 2x 1GB PC3200 DDR RAM Maxtor 300GB IDE HDD 16 MB NVIDIA TNT2 Pro AGP OKIA 300W ATX PSU Gigabyte 52x CD-ROM The issue right now is that I'm trying to install Windows XP from the CD drive but the computer randomly restarts partway through installation. My other build was BSODing due to RAM latency errors. This ECS board manual states that memory modules "up to 333 MHz" (i.e. PC2700) is supported. However, I am running PC3200 modules, which is clearly faster than PC2700. Would this be causing the computer from randomly restarting? EDIT 1: I also wanted to mention that my Emachines T2482 is actually running 2x 512MB PC3200 DDR RAM when it should only be supporting PC1600 and PC2100 DDR RAM. Yet there are no issues with it.

  Read the article

• mac osx script - find mounted disc with name, copy file from desktop to it, when copy complete, unmount disc

  - by Joshc

  Is there some kind of mac script which finds a newly mounted disc drive that has the name 'EXAMPLE', then copies a file/folder to it and safely ejects the disc when copy has finished? I don't mind if the script needs to be executed by a short cut. And will it work if there are multiple drives plugged in? The reason I am asking is becuase i have 5000 usb memory sticks that I need to copy about 20mb worth of data to it. Thanks in advance for any ideas.

  Read the article

• import macintosh thunderbird emails to windows email

  - by Ryan

  My mac laptop died. The hard drive is good. I am able to pull what I need off my mac and copy it to windows using an open source tool (I forgot the name of it). I need my old mac emails. I was using the macintosh thunderbird for emails. How do I load those emails into thunderbird, outlook, or any other windows email tool? I did google this and there were some brief explanations, but they did not work. The vast majority of posts are about going from windows to mac.

  Read the article

• "Verifying DMI Pool" hang caused by raid array..

  - by Ling

  Hi Experts, I have a problem, I obtained a new server with 4 hard drives (2 500 gig, 2 two TB), and an adeptec RAID card. I arranged them in two arrays with RAID 1 (500 gigs together as primary and the 2 TB drives for lots of data). When both arrays are configured, the server hangs while booting at message "Verifying DMI Pool", however if I remove the second array from the configuration the server boots fine. I have checked they are both on different channels, I have disabled all other peripherals from the boot menu and ensured the hard drive is #1. I have booted into the linux rescue mode and checked that it is reading both arrays fine. What else could be causing these problems? Thanks

  Read the article

• How do I burn Xubuntu Live CD

  - by Julian

  I downloaded the 600+ MB Xubunto ISO. Burnt it to a DVD using Nero Burning Rom, as a Bootable DVD. My bootup sequence won't detect XUbuntu and still only detects windows on my Hard Drive even after I set my BIOS to boot from the CDROM first. How do I burn the Live CD with Nero? I'm thinking maybe I should extract the contents and then burn the folder as data to my DVD. P.S: I only have DVDs lying around.

  Read the article

• UDF filesystem -> Maximum number of files

  - by user978122

  I am considering partitioning a rather large hard drive with the UDF filesystem for an experiment, and would like to ask if anyone knows the maximum number of files, either by directory, or as a whole, that the UDF filesystem can handle? For some background, I looked at the JFS and XFS filesystems (NTFS has a limitation of the number of files per volume); however, since I run Windows, that's kind of out. UFD, on the other hand, does not appear to have these limitations, but then, I cannot really find any information on just how many files per volume the UDF file system supports.

  Read the article

• How to access Windows Registry from DOS

  - by SEARAS

  How to access Windows Registry from DOS? I need to access registry from DOS, while I boot from DOS bootable disk. I've searched all the internet, and found only Offline NT Password and Registry Editor, which can not be used in DOS, as I understand. Also I've found RegView (from many mirrors), which isn't working too (I've tried many instructions). Is there any easy-in-usage tool, like reg.exe, which is able to load registry hives, so that I can change registry values?? Or any working instructions ?? Note: I already have a bootable drive, which can read/write to NTFS drives. Thanks in advance!

  Read the article

• Iptables mark incoming packet - vpn routing

  - by Tom

  I have connected my home to my workplace for out of house backup reasons through openvpn. The connection is working nicely. At work I have 5 fixed IP addresses. Now I would like to assign one of these IP addresses to be forwarded to my home machine. I have confirmed packet arrival at my home machine with tcpdump. The problem is that my default route at home is NOT the tun0 (naturally), but eth0 to my own ISP. So I created a separate routing table to route my tun0 packets back to where they belong, but do not how to mark the incoming packet which arrive through tun0 with iptables, so I can drive them back. I do not want any port restrictions, but only what comes from tun0 should leave through tun0 thanks tom

  Read the article

• What are those white circles on the desktop in Gnome 3?

  - by monk

  I have Fedora 20 with GNOME 3.10.2. On the desktop background (i.e. where the wallpaper is), there are five small white circles centered at the very bottom of the screen. The first is filled, the others are not. I can click those circles, thereby changing which one is filled, like a radio button. I cannot for the life of me figure out what those circles are supposed to do, and it's starting to drive me crazy. Clicking and thus changing which circle is filled does nothing I can perceive, and there seems to be no configuration option anywhere that has anything to do with them. What are those things? Is there any way to get rid of them? Edit: I made a screenshot of my desktop with no programs running. You can see the dot/circle thingies at the bottom. Link: http://www.imageupload.co.uk/images/2014/08/18/Screenshot_from_2014-08-18_235427.png

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

  Read the article

• Minimum space required for Server 2008 R1 install?

  - by Chris J

  I'm trying to plan disk space for a virtual environment, and wanting to keep virtual disks as small as possible - mostly as apart from the base OS, the software going onto the VM is less than a few MB, so want to avoid physical disk space going to waste; plus it'll give me an idea of how many VMs I could physically fit in {x}GB of physical drive. For Server 2003, I've had installs on 2GB and 5GB sized virtual disks. However for Server 2008, Microsoft recommends a minimum of 10GB (I assume this is both for x32 and x64). For the record, I will be installing the x32 version. Now I know I could just go ahead and try a small install, but wanted to solicit any practical knowledge as well :-) What's the smallest install of Server 2008 possible? (excluding server core installations).

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state [closed]

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

  Read the article

• mounts aren't case-sensitive

  - by Asi

  I mounted a few drives from Linux boxes in my network, but those mounts aren't case-sensitive. The mount command I used ( from the man mount.cifs, case-sensitive should be the default ): mount //10.0.1.10/remote_folder /local_folder -t cifs -o username=xxxx,password=xxxx but those mounts aren't sensitive. for example doing: ls -l /local_folder/testfile.txt ls -l /local_folder/TESTFILE.TXT give's the same result... instead of 'file not found' Couple of important points: All drives are running on Linux machines. My local machine is running Fedora 18 and it is case-sensitive for ANY folder/file expect the mounted drives. All drive/mounts are case-sensitive when when doing SSH. So if I SSH from my local machine to a remote machine, doing ls -l /local_folder/TESTFILE.TXT will say file not found as it should. So I believe the issue is in my local machine and not in the way I did the mount. but I'm not sure where to look next (I'm new to Linux)

  Read the article

• Blackberry product.dll is missing error

  - by JosephStyons

  I have a new Blackberry 9630. I downloaded this software for it. When I click on the newly installed "Desktop Manager", I get this error: --------------------------- DesktopMgr.exe - System Error --------------------------- The program can't start because product.dll is missing from your computer. Try reinstalling the program to fix this problem. --------------------------- OK --------------------------- If I manually search for that file across my entire c:\ drive, it is not there. I am using Windows 7. What can I do to fix this problem?

  Read the article

• GUID Partition Table & Linux

  - by Zac

  (1) Is it true that the new GUID Partition Table scheme allows a user to partition a drive however he/she like, outside of the traditional MBR "4 primaries or 3 primaries + 1 extension" paradigm? If so, are there any limitations to the GPT? If my assumption is wrong, what are its advantages over the MBR model? (2) I'm getting a new laptop this week and will be installing Ubuntu (and, more generally, Linux) for the first time ever. Does Ubunutu come pre-configured with MBR as a default? If so, how do I get Ubuntu w/ GPT? If not, how do I specify GPT over MBR? Thanks!

  Read the article

• Suggestion for boot manager in external hard disk

  - by Korrupzion

  Hi, I just bought an 1TB External Hard drive with eSATA, USB, FW400/800 (LaCie if you are interested). I already put the windows 7 installation in a FAT32 active partition so i can plug the HDD via USB, since my notebook or other computers doesn't support boot via eSATA commonly, and it works. Now i want to do more partitions so i'm looking for a way to have a boot manager as active partitions that allows me to boot from different partitions in my HDD (win7, ubuntu installations for example) I want to know if you know any software to do this or you already have this system. Thanks and sorry i have too many grammar errors because english is not my native language :)

  Read the article

• Recovering a Windows XP License key

  - by Fortyrunner

  I threw out a Windows XP machine a while ago (the motherboard failed). I kept the hard drive and the XP installation media. Problem is the license key was on a sticker on the machine - doh! The original manufacturer has gone bust (Evesham) and I suspect that Microsoft will be of little help. Is there any easy way to get the license key off the hard disk? Can I just find the file with the registry data in it and get the key using a hex editor? I really need a spare XP key for use in a Windows VM.

  Read the article

• Gparted: Copy Greyed Out

  - by David

  I booted my system to a gparted linux live CD and I have two partitions: /dev/sda1 /dev/sda2 I want to move both of them to my new physical hard drive (called /dev/sdb). When I right click on /dev/sda1, I can choose copy and then paste it onto /dev/sdb. When I right click on /dev/sda2, copy is greyed out and there is a yellow exclamation point to the left of the disk. I know that the disk works since I can boot my computer from it. Why won't gparted let me copy /dev/sda2 to my new hard disk? Since the option is greyed out, I don't even get an error message. Thanks!

  Read the article

• Western Digital Mybook is creating folders I didn't create

  - by Rogue

  I have a WD MyBook which has been creating empty folders with a long string of numbers and alphabets and some shorter ones with just some numbers with a 0kb file in it Some of these can be deleted but some just stay put. It's irritating to find new ones everyday and now i have a collection of them which don't delete is there any way to delete these ? Edit: I have scanned the drive using Antivirus and AntiMalware Software so i don't think it would have a virus One solution is copying all the matter elsewhere and formatting the hard disk but there is not guarantee that these folders wont reappear.

  Read the article

• Boot camp with Vista crashes on startup

  - by Mark Pim

  I have a 2006 vintage MacBook Pro (Intel Core 2 Duo) and have been using Boot Camp since it was in beta. I had been running XP SP2 on it with Tiger quite happily. I've recently wiped and reinstalled everything to upgrade to Leopard. After installing Leopard, I fired up the Boot camp assistant and used it to install the Windows 7 RC. That worked really nicely, but my HFS+ driver didn't work under Windows 7 yet so I decided to install Vista instead. I didn't repartition the drive, just launched the Vista installation disk from BIOS and told it to overwrite the existing Windows 7 install. It installed fine and I installed the Boot Camp drivers, still all fine. Now, however, every time I boot into Windows and login it hard reboots itself as the desktop is appearing. After this it works fine again. Until the next power off. Has anyone had any similar problems? Or can offer suggestions on how to solve this?

  Read the article

• Backup Exec backup-to-disk folder creation - Access denied

  - by ewwhite

  I'm having a difficult time creating a backup-to-disk folder in Symantec Backup Exec 12.5 and Backup Exec 2010. The backend storage is a Nexenta/ZFS-based NAS filer sharing the volume via CIFS. I've also seen the issue on other *nix-based NAS devices. I've attempted mapping the drive, providing the full paths to the folder, etc. I can browse to the share just fine from within Windows, but Backup Exec fails to create the B2D folder with different variants of a Unable to create new backup folder. Access denied error. I've attempted creating service accounts in Backup Exec to handle the authentication, but nothing seems to work. What's the key to making this work?

  Read the article

• Removing partition to install OS?

  - by Shane

  So i have a computer that has 2 hard drives and i installed Ubuntu server on it. I used LVM to connect the two. So i tried to put windows back on it but it failed because it said it couldn't position the drive and then when i booted again the OS couldn't be found. So i booted it with the Ubuntu setup disc but now when it goes to partition it says that the position can not be modified because its already in use. I am asking if there is a way i can just remove everything and start fresh?

  Read the article

• Easy File Locker Locked My Desktop

  - by user20358

  I'm happy with easy file locker, it does as promised. Last night I decided to lock all my files. C:users/Barry Some how my desktop is locked. When I closed EFL my desktop went black. Safe mode is still black. Help Below are my spec's eMachines ET1161-03 CPU: Athlon 64 X2 4400+; CPU speed: 2300GHz; Graphics adapter: nVidia GeForce 6150SE; Monitor: No; Hard drive size: 320GB; WorldBench rating: Fair

  Read the article

• Is a ext3 Linux filesystem byte order independent

  - by Lothar

  I have a good old HP-C3700 Workstation with PA-RISC CPU here that I would like to use as a subversion server for a very large repository. I just worry what happens if the workstation dies (everybody who knows this computer knows that it is running like an Abrams tank and unlikely to happen in the next decade). I'm using Debian Linux on this system. If the mainboard dies can I just plug the SCSI drive into a PC and read the files from a normal Intel Linux PC? Which software RAID levels would be safe?

  Read the article

< Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >