Search Results

Search found 20475 results on 819 pages for 'multiple repositories'.

Page 524/819 | < Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >

• Speed up loading of test results from builds in Visual Studio

  - by Jakob Ehn

  I still see people complaining about the long time it takes to load test results from a TFS build in Visual Studio. And they make a valid point, it does take a very long time to load the test results, even for a small number of tests. The reason for this is that the test results is not just the result of the test run but also all the binaries that were part of the test run. This often also means that the debug symbols (*.pdb) will be downloaded to your local machine. This reason for this behaviour is that it letsyou re-run the tests locally. However, most of the times this is not what the developer will do, they just want to know which tests failed and why. They can then fix the tests and rerun them locally. It turns out there is a way to load only the test results, which is much faster. The only tricky bit is to find the location of the .trx file that is generated during the build. Particularly in TFS 2010 where you often have multiple build agents, which of corse results in different paths to the trx file. Note: To use this you must have read permission to the build folder on the build agent where the build was executed. Open the build result for the build Click View Log Locate the part where MSTest is invoked. When using test containers, it looks like this:   Note: You can actually search in the log window, press Ctrl+F and you will get a little search box at the bottom. Nice! On the MSTest command line call, locate the /resultsfileroot parameter, which points to the folder where the test results are stored Note that this path is local for the build server, so you need to replace the drive letter with the server name: D:\Builds\Project\TestResults to \Project\TestResults">\\<BuildServer>\Project\TestResults Double-click on the .trx file and you will notice that it loads much faster compared to opening it from the build log window

  Read the article

• Models with more than one mesh in JMonkeyEngine

  - by Andrea Tucci

  I’m a new jmonkey engine developer and I’m beginning to import models. I tried to import simple models and no problems appeared, but when I export some obj models having more than one mesh in the OgreXML format, Blender saves multiple meshes with their own materials (e.g. one mesh for face, another for body etc). Can I export all the meshes in one? I’ve tried to join all the meshes to a major one with blender (face joins body), but when I export the model and then create the Spatial in jme(loading the path of the “merged” mesh), all the meshes that are joined to the major doesn’t have their materials! I give a more clear example: I have an .obj model with 3 meshes and I export it. I have : mesh1.mesh.xml , mesh2.mesh.xml , mesh3.mesh.xml and their materials mesh1.material, mesh2.material mesh3.material so I import the folder in Assets/Models/Test and now I have to create something like: Spatial head = assetManager.loadModel( [path] ); Spatial face = assetManager.loadModel( [path] ) one for each mesh and than attach them to a common node. I think there is a way to merge those mesh maintaining their materials! What do you think? Thanks

  Read the article

• CodePlex Daily Summary for Wednesday, July 30, 2014

  CodePlex Daily Summary for Wednesday, July 30, 2014Popular ReleasesGhostscript.NET: Ghostscript.NET v.1.1.9.: v.1.1.9. fixed problem with the PDF invisible layers (the optional content groups which will be left unmarked if processtrailerattrs is not executed). fixed text rasterization problem for some pdf's, it seems that the 'pdfopen begin' did not initialize everything required to render pdf properly so we replaced it with the 'runpdfopen' method which corrects everything (problem reported by "xatabhk"). changed GhostscriptRasterizer methods to support Stream insted of the MemoryStream. fixed...Recaptcha for .NET: Recaptcha for .NET v1.5: What's NewMinor bug fixes Support for legacy .NET framework 4.0 and ASP.NET MVC 4. Support for .NET Framework 4.5.1.Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityTEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titleSharePoint 2010 & 2013 Google Maps V3 WebPart: SPGoogleMap webpart - SharePoint 2013 - July 2014: Google API key support added. The webpart does not need it but if you have one you can use it.QuieNet: Version 2.0: Replaced autoplay prevention mechanism: instead of replacing the player itself, only the function that starts the player is replaced. This only works for video players for now, and live streams are handled as before.XamlImageConverter: Xaml Image Converter 3.11: Improvements: - ASP.NET 64bit support for html2pdf. - Attribute to suppress parallel execution. - Ghostscript rendering. - No need for a snapshot for a imagemap, you can use original svg image.Automatic Parallel Computing: APC SDK 2.1: Features: integration with Amazon DynamoDB. Includes: Investment Club Benchmark Investor Ranking BenchmarkCatchException (Manage Exception): CatchMe Exception Version 1.0: Code SourceDnnFoundation Skin for DnnCMS: DnnC DnnFoundation Skin: First release of the DnnC DnnFoundation SkinQND Operations Manager SNMP Monitoring: QND.SNMP.Library version 1.0.0.103: fixed bug #1815FlMML customized: FlMML customized c.s.30938: ????????LFO、?????LFO??????。 ???·Y·????LFO、??????????????????。 ???LFO????????????????????。CS-Script Source: Release v3.8.4: CSScript.Evaluator is migrated to Mono v3.3.0 Added aggregating //css_ignore_ns from the imported scripts cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationDotSpatial: DotSpatial 1.7: DotSpatial.Full - includes all DotSpatial libraries, extensions and DemoMap application DotSpatial.Core - includes only DotSpatial core libraries Entire list of changes see in the issue tracker. Main changes: Improved common stability, optimized memory and speed when loading and rendering shapefiles, fixed some memory leaks in rasters and shape layers. Simplified plugin infrastructure. Now there are predefined implementations for all required components (IStatusControl, IDockManager, IHead...New ProjectsAdmin QuikView for Dynamics CRM 2013: Admin QuickView is a gives you a quick hierarchical snapshot of all active Business Units, Teams, Security Roles and Users in your Dynamics CRM Organization.All bots: Windows Phone app to chat with bots from http://www.pandorabots.com/Calculator Proj: Calculator with power hexadecimal binary option and more... Computational Network Toolkit (CNTK): Computational networks (CNs) generalize models that can be described as a series of computational steps such as DNN, CNN, RNN, LSTM, and maximum entropy models.DelegateExpressionizer: Library is intended to decompile delegate code at runtime and build and appropriate expression tree.Hystaspes: Logistics Management System: Logistics Management SystemKinect Experiments: This repository contains various code samples, proof-of-concepts and utilities for Kinect for Windows (v1.8 and v2)ppcs: Placement Project Version 1.0.0.0Reusable MVC Partial View with JQuery Datatables: Reusable jQuery DataTables integrated with in a Partial View of MVC 4.0 is a reusable control/view written entirely in C# and JQuery, my aim was to create a MVCShared Code Project Template for Visual Studio 2013 Update 2: This Project contains the source code for a Shared Project template for VS 2013 which extends the shareing of code to all Project types besides universal apps. Text word search: This project is a sample for searching words in a notepad or a word file through wpf platform. Trace And Watch: Trace And Watch is a Pintool developed to assist in finding 32-bit integer errors.Vtron Automatic tester screen parameters: VTRONWalli: Walli is an open source SalesForce integrated developer environment(IDE) application written in .NET.Windows Kirlian WiFi App: Illustrates the radio field generated by WiFiWOMPS - What's new On My PLEX Server: Purpose of this project is to send an user a weekly or daily email of all new content add to their Plex library.

  Read the article

• Demantra 7.3.1.3 Controlling MDP_MATRIX Combinations Assigned to Forecasting Tasks Using TargetTaskSize

  - by user702295

  New 7.3.1.3 parameter: TargetTaskSize Old parameter: BranchID  Multiple, deprecated  7.3.1.3 onwards Parameter Location: Parameters > System Parameters > Engine > Proport   Default: 0   Engine Mode: Both   Details: Specifies how many MDP_MATRIX combinations the analytical engine attempts to assign to each forecasting task.  Allocation will be affected by forecsat tree branch size.  TaskTargetSize is automcatically calculated.  It holds the perferred branch size, in number of combinations in the lowest level. This parameter is adjusted to a lower value for smaller schemas, depending on the number of available engines.   - As the forecast is generated the engine goes up the tree using max_fore_level and not top_level -1.  Max_fore_level has     to be less than or equal to top_level -1.  Due to this requirement, combinations falling under the same top level -1     member must be in the same task.  A member of the top level -1 of the forecast tree is known as a branch.  An engine     task is therefore comprised of one or more branches.     - Reveal current task size       go to Engine Administrator --> View --> Branch Information and run the application on your Demantra schema.  This will be deprecated in 7.3.1.3 since there is no longer a means of adjusting the brach size directly.  The focus is now on proper hierarchy / forecast design.     - Control of tasks       The number of tasks created is the lowest of number of branches, as defined by top level -1 members in forecast       tree, and engine sessions and the value of TargetTaskSize.  You are used to using the branch multiplier in this       calculation.  As of 7.3.1.3, the branch ID multiple is deprecated.     - Discovery of current branch size       To resolve this you must review the 2nd highest level in the forecast tree (below highest/highest) as this is the       level which determines the size of the branches.  If a few resulting tasks are too large it is recommended that       the forecast tree level driving branches be revised or at times completely removed from the forecast tree.     - Control of foreacast tree branch size         - Run the following sql to determine how even the branches are being split by the engine:             select count(*),branch_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by branch_id;             This will give you an understanding if some of the individual branches have an unusually large number of           rows and thus might indicate that the engine is not efficiently dividing up the parallel tasks.         - Based on the results of this sql, we may want to adjust the branch id multiplier and/or the number of engines           (both of these settings are found in the Engine Administrator)           select count(*), level_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by level_id;           This will give us an understanding at which level of the Forecast tree where the forecast is being generated.            Having a majority of combinations higher on the forecast tree might indicate either a poorly designed forecast           tree and/or engine parameters that are too strict           Based on the results of this we would adjust the Forecast Tree to see if choosing a different hierarchy might           produce a forecast, with more combinations, at a lower level.           For example:             - Review the 2nd highest level in the forecast tree, below highest/highest, as this is the level which               determines the size of the branches.             - If a few resulting tasks are too large it is recommended that the forecast tree level driving branches               be revised or at times completely removed from the forecast tree.               - For example, if the highest level of the forecast tree is set to Brand/All Locations.             - You have 10 brands but 2 of the brands account for 67% and 29% of all combinations.             - There is a distinct possibility that the tasks resulting from these 2 branches will be too large for               a single engine to process.  Some possible solutions could be to remove the Brand level and instead               use a different product grouping which has a more even distribution, possibly Product Group.               - It is also possible to add a location dimension to this forecast tree level, for example Customer.                This will also reduce forecast tree branch size and will deliver a balanced task allocation.             - A correctly configured Forecast Tree is something that is done by the Implementation team and is               not the responsibility of Oracle Support.  Allocation will be affected by forecast tree branch size.  When TargetTaskSize is set to 0, the default value, the system automatically calculates a value for 'TargetTaskSize' depending on the number of engines.   - QUESTION:  Does this mean that if TargetTaskSize is 1, we use tree branch size to allocate branches to tasks instead                of automatically calculating the size?     ANSWER: DEV Strongly recommends that the setting of TargetTaskSize remain at the DEFAULT of ZERO (0).   - How to control the number of engines?     Determine how many CPUs are on the machine(s) that is (are) running the engine.  As mentioned earlier, the general     rule is that you should designate 2 engines per each CPU that is available.  So for example, if you are running the     engine on a machine that has 4 CPU then you can have up to 8 engines designated in the Engine Administrator.  In this     type of architecture then instead of having one 'localhost' in your Engine Settings Screen, you would have 'localhost'     repeated eight times in this field.     Where do I set the number of engines?                 To add multiples computers where engine will run, please do a back-up of Settings.xml file under         Analytical Engines\bin\ folder, then edit it and add there the selected machines.                 Example, this will allow 3 engines to start:         - <Entry>           <Key argument="ComputerNames" />           <Value type="string" argument="localhost,localhost,localhost" />           </Entry Otherwise, if there are no additional engines defined, the calculated value of 'TargetTaskSize' is used. (Oracle does not recommend changing the default value.) The TargetTaskSize holds the engines prefered branch size, in number of level 1 combinations.   - Level 1 combinations, known as group size The engine manager will use this parameter to attempt creating branches with similar size.   * The engine manager will not create engines that do not have a branch. The engine divider algorithm uses the value of 'TargetTaskSize' as a system-preferred branch size to create branches that are more equal in size which improves engine performance.  The engine divider will try to add as many tasks as possible to an existing branch, up to the limit of 'TargetTaskSize' level 1 combinations, before adding new branches. Coming up next: - The engine divider - Group size - Level 1 combinations - MAX_FORE_LEVEL - Engine Parameters  

  Read the article

• shared web hosting architecture in a university setting

  - by gaspol

  We're in the process of creating a shared webhosting infrastructure for our university. Departments within the university can host their sites on this infrastructure. We're thinking of setting up multiple, load balanced web servers attached to shared storage (for web content and Apache config files). There will also be database servers behind these web servers. Does anyone have any other suggestions about this? Any recommendations for an alternative setup? Would having cPanel/WHM/Plesk be a good idea to automate account creation/maintenance?

  Read the article

• avoid dupllcate copies in thunderbird when using gmail labels

  - by mandy

  I like the system of multiple gmail labels but am concerned about space used. I think that TB stores a separate copy of the whole email in every folder corresponding to a gmail label [including a copy in the "allmail" folder along with a separate copy in the each of the other folders]. Can I arrange to store a single copy of the email in TB,[perhaps in the allmail folder] with a shortcut type pointer from the individual folders to that single copy.[i.e for every email with one gmail label [eg personal] there are already 2 copies in TB, one in the allmail folder and a second in the "personal" folder

  Read the article

• Site to site VPN using RRAS from an untrusted network?

  - by DrZaiusApeLord

  Our remote office will be moving to a new space where internet will be provided. They'll be behind a router doing NAT (I do not have admin rights to this router). They will be sharing a printer with the other people on the LAN, but will need VPN to our network for email and file shares. I was thinking of just having them run the windows VPN client and connecting via PPTP like they do when they are off-site, but I have read that multiple PPTP connections from the same NAT'd address to the same destination doesn't work well or at all. I am thinking some kind of site-to-site VPN is needed so there is just one tunnel. Can I just put in a VPN gateway, set it to connect to our RRAS/PPTP server, and have them use it as their default gateway? Perhaps even use the local default gateway for internet traffic. If so, what VPN gateway/device is recommended for this? Or other solutions? Thanks.

  Read the article

• How to advertise (free) software?

  - by nebukadnezzar

  I'm not sure if this fits on SO, but other SE sites don't seem to fit either, so I understand when this question gets moved, Although I'd like to avoid getting it closed due to being offtopics, since I think that this question might fit, considering this part of the FAQ: Stack Overflow is for professional and enthusiast programmers, ... covers … a specific programming problem ... matters that are unique to the programming profession Sorry for the lengthy Introduction, though. When Software is advertised, it is usually Software for one (or more) specific purpose, such as: Mozilla Firefox - A Web Browser Ubuntu - An Operating System Python - A Programming Language Visual Studio - A Development Studio ... And so on. But when writing Libraries, that is, Software that doesn't necessarily serve one specific purpose, but instead multiple purposes, which are usually supposed to be used inside an application, such as: Irrlicht - A 3D Engine Qt - An Application Framework ... The process of advertisement gets a little more difficult. I'm a developer of the latter kind of Software, and I naturally want to advertise my Software. It's not commercial Software; It's not GPL either. It's completely free (Licensed under the MIT License :-)). I naturally host my stuff at github, which technically makes it very easy to access the software, and I thought that these might be possible options, although I have no experience with them: Submit the Software to Freshmeat, and hope for the best Submit the Software to Sourceforge, and hope someone accidently stumbles over it Write spammails, and get death threats via Mail ... But something tells me that these methods are probably not the best Methods. So, my final question would be, How does the Average Joe Hobby Programmer advertise his/her Software Library?

  Read the article

• Vernon's book Implementing DDD and modeling of underlying concepts

  - by EdvRusj

  Following questions all refer to examples presented in Implementing DDD In article we can see from Figure 6 that both BankingAccount and PayeeAccount represent the same underlying concept of Banking Account BA 1. On page 64 author gives an example of a publishing organization, where the life-cycle of a book goes through several stages ( proposing a book, editorial process, translation of the book ... ) and at each of those stages this book has a different definition. Each stage of the book is defined in a different Bounded Context, but do all these different definitions still represent the same underlying concept of a Book, just like both BankingAccount and PayeeAccount represent the same underlying concept of a BA? 2. a) I understand why User shouldn't exist in Collaboration Context ( CC ), but instead should be defined within Identity and Access Context IAC ( page 65 ). But still, do User ( IAC ), Moderator ( CC ), Author ( CC ),Owner ( CC ) and Participant ( CC ) all represent different aspects of the same underlying concept? b) If yes, then this means that CC contains several model elements ( Moderator, Author, Owner and Participant ), each representing different aspect of the same underlying concept ( just like both BankingAccount and PayeeAccount represent the same underlying concept of a BA ). But isn't this considered a duplication of concepts ( Evan's book, page 339 ), since several model elements in CC represent the same underlying concept? c) If Moderator, Author ... don't represent the same underlying concept, then what underlying concept does each represent? 3. In an e-commerce system, the term Customer has multiple meanings ( page 49 ): When user is browsing the Catalog, Customer has different meaning than when user is placing an Order. But do these two different definitions of a Customer represent the same underlying concept, just like both BankingAccount and PayeeAccount represent the same underlying concept of a BA? thanks

  Read the article

• Why doesn't my IDE do background compiling/building?

  - by MKO

  Today I develop on a fairly complex computer, it has multiple cores, SSD drives and what not. Still, most of the time I'm programming the computer is leasurely doing nothing. When I need to compile and run/deploy a somewhat complex project at best it still takes a couple of seconds. Why? Now that we're living more and more in the "age of instant" why can't I press F5 in Visual studio and launch/deploy my application instantly? A couple of seconds might not sound so bad but it's still cognitive friction and time that adds up, and frankly it makes programming less fun. So how could compilation be instant? Well, People tend to edit files in different assemblies, what if Visual Studio/The IDE constantly did compilation/and building of everything that I modified anytime that it might be appropriate. Heck if they wanted to go really advanced they could do per-class compilation. The compilation might not work but then it could just silently do nothing (except adding error messages to the error window). Surely todays computer could dedicate a core or two to this task, and if someone found it annoying it could be disabled by option. I know there's probably a thousand technical issues and some fancy shadow copying that would need to be resolved for this to be seamless and practical but it sure would make programming more seamless. Is there any practical reason why this scenario isn't possible? Would the wear and tear of continually writing binaries be too much? Couldn't assemblies be held in memory until deployed/run?

  Read the article

• Do I need a ssl certificate if just pointing my domain to Cloudfront?

  - by hashpipe

  I have a website running on a domain (e.g site.com). I have an additional domain(e.g sitecdn.com) which basically points to Amazon Cloudfront for delivery. Amazon Cloudfront in turn basically fetches the data from the main domain (site.com). I use this setup primarily to have multiple subdomains of my sitecdn.com to point to assets via the cdn. The main website has a ssl certificate, and I intend to put all assets served from the cdn as https links only. Something like <img src="https://img.sitecdn.com/image.jpg" /> I'm a little confused whether I need a ssl for my cdn domain. In cloudfront I can set the setting to allow both https and http traffic. Do I need a ssl certificate for this ? If yes, then where do I install the ssl certificate, since I don't have a server for sitecdn.com.

  Read the article

• Why does Ubuntu keep trying to connect to a WiFi network while plugged into an ethernet

  - by labarna

  My desk is situated at the edge of the range of a wireless signal which I use occasionally (when away from my desk) and is therefore saved in network manager. At my desk, however, I plug into the ethernet cable. While I'm working the computer is constantly trying to join the wireless network and usually failing this results in two annoying behaviors. 1: In gnome shell the network connect and disconnect notices keep popping up at the bottom of the screen and I have to click them to make them disappear (I assume it's been fixed in the next version of gnome). 2: (the worst!) Occasionally the wifi password dialog will pop up and ask for the password to this network (which is already saved). An additionally annoyance is that in gnome shell I'll get two copies of the dialog that I have to cancel, one is gnome shell themed (no window border etc...) and the other is just normal gnome themed. (Sometimes if I've been away from the computer for a while I will have multiple copies of this dialog up as its been trying to connect for a while resulting in at times 20 dialogs to cancel). Note, all the while I've been happily connected to the ethernet and have full network access. This is incredibly annoying and distracting, why doesn't ubuntu stop trying to connect to wifi if I'm on the ethernet (unless I want to broadcast my own network, but that's different)?

  Read the article

• Is "as long as it works" the norm?

  - by q303

  Hi, My last shop did not have a process. Agile essentially meant they did not have a plan at all about how to develop or manage their projects. It meant "hey, here's a ton of work. Go do it in two weeks. We're fast paced and agile." They released stuff that they knew had problems. They didn't care how things were written. There were no code reviews--despite there being several developers. They released software they knew to be buggy. At my previous job, people had the attitude as long as it works, it's fine. When I asked for a rewrite of some code I had written while we were essentially exploring the spec, they denied it. I wanted to rewrite the code because code was repeated in multiple places, there was no encapsulation and it took people a long time to make changes to it. So essentially, my impression is this: programming boils down to the following: Reading some book about the latest tool/technology Throwing code together based on this, avoiding writing any individual code because the company doesn't want to "maintain custom code" Showing it and moving on to the next thing, "as long as it works." I've always told myself that next job I'm going to get a better shop. It never happens. If this is it, then I feel stuck. The technologies always change; if the only professional development here is reading the latest MS Press technology book, then what have you built in 10 years but a superficial knowledge of various technologies? I'm concerned about: Best way to have professional standards How to develop meaningful knowledge and experience in this situation

  Read the article

• What is the precise definition of programming paradigm?

  - by Kazark

  Wikipedia defines programming paradigm thus: a fundamental style of computer programming which is echoed in the descriptive text of the paradigms tag on this site. I find this a disappointing definition. Anyone who knows the words programming and paradigm could do about that well without knowing anything else about it. There are many styles of computer programming at many level of abstraction; within any given programming paradigm, multiple styles are possible. For example, Bob Martin says in Clean Code (13), Consider this book a description of the Object Mentor School of Clean Code. The techniques and teachings within are the way that we practice our art. We are willing to claim that if you follow these teachings, you will enjoy the benefits that we have enjoyed, and you will learn to write code that is clean and professional. But don't make the mistake of thinking that we are somehow "right" in any absolute sense. Thus Bob Martin is not claiming to have the correct style of Object-Oriented programming, even though he, if anyone, might have some claim to doing so. But even within his school of programming, we might have different styles of formatting the code (K&R, etc). There are many styles of programming at many levels. So how can we define programming paradigm rigorously, to distinguish it from other categories of programming styles? Fundamental is somewhat helpful, but not specific. How can we define the phrase in a way that will communicate more than the separate meanings of each of the two words—in other words, how can we define it in a way that will provide additional meaning for someone who speaks English but isn't familiar with a variety of paradigms?

  Read the article

• Tips and tricks to make NX server more stable

  - by gareth_bowles

  My shop has been using the FreeNX server on Fedora 11 for a while now and mostly getting good results, especially with performance, but we have some annoying problems with client connections. There are two main issues: Client sessions sometimes freeze after a long time (seems to be at least 2 hours of having the session active) We often have to make multiple attempts to start a new client session, especially if a previous session was suspended rather than terminated. In qwuite a few cases, we've had to restart the NX server to get around this. Our NX server configuration is the default except that we've enabled logging level 7 to /var/log/nxserver.log, and set the font server to "unix:/7100" so that it uses xfs. Does anyone have any ideas for making things more stable ?

  Read the article

• How can artificially create a slow query in mysql?

  - by Gray Race

  I'm giving a hands on presentation in a couple weeks. Part of this demo is for basic mysql trouble shooting including use of the slow query log. I've generated a database and installed our app but its a clean database and therefore difficult to generate enough problems. I've tried the following to get queries in the slow query log: Set slow query time to 1 second. Deleted multiple indexes. Stressed the system: stress --cpu 100 --io 100 --vm 2 --vm-bytes 128M --timeout 1m Scripted some basic webpage calls using wget. None of this has generated slow queries. Is there another way of artificially stressing the database to generate problems? I don't have enough skills to write a complex Jmeter or other load generator. I'm hoping perhaps for something built into mysql or another linux trick beyond stress.

  Read the article

• Remote support via VPN without split tunnel

  - by Robe Eleckers

  my title might not be very clear, but I'll explain my setup in more detail now. We have several customers (companies) that need to be remotely supported. At these customers we have servers running with our software that needs to be serviced. These servers are (almost) never connected to the internet. For this we have multiple PC's running VPN clients. These PC's run a VNC server so our service engineers can login from their home laptop remotely to these PC's and connect from there to our customer via the VPN connection on the PC. The problem is however that several customers do not allow split tunneling. That means that when we connect via VPN to such a customer the VNC connection drops. Our current workaround is using a Citrix VM which we control via XenCenter console, but it's quite slow. Are there common solutions to handle this?

  Read the article

• MDX needs a function or macro syntax

  - by Darren Gosbell

  I was having an interesting discussion with a few people about the impact of named sets on performance (the same discussion noted by Chris Webb here: http://cwebbbi.wordpress.com/2011/03/16/referencing-named-sets-in-calculations). And apparently the core of the performance issue comes down to the way named sets are materialized within the SSAS engine. Which lead me to the thought that what we really need is a syntax for declaring a non-materialized set or to take this even further a way of declaring an MDX expression as function or macro so that it can be re-used in multiple places. Because sometimes you do want the set materialised, such as when you use an ordered set for calculating rankings. But a lot of the time we just want to make our MDX modular and want to avoid having to repeat the same code over and over. I did some searches on connect and could not find any similar suggestions so I posted one here: https://connect.microsoft.com/SQLServer/feedback/details/651646/mdx-macro-or-function-syntax Although apparently I did not search quite hard enough as Chris Webb made a similar suggestion some time ago, although he also included a request for true MDX stored procedures (not the .Net style stored procs that we have at the moment): https://connect.microsoft.com/SQLServer/feedback/details/473694/create-parameterised-queries-and-functions-on-the-server Chris also pointed out this post that he did last year http://cwebbbi.wordpress.com/2010/09/13/iccube/ where he pointed out that the icCube product already has this sort of functionality. So if you think either or both of these suggestions is a good idea then I would encourage you to click on the links and vote for them.

  Read the article

• Tracking feature requests for small-scale components

  - by DXM

  I'm curious how other development teams (especially those that work in moderate to large development groups) track "future" features/wishlists for functionality for internally developed frameworks or components. I know the standard advice is that a development team should find one good tool for tracking bugs/features and use that for everything and I agree with that if the future requests are for the product itself. In my company we have an engineering department, which is broken up into multiple groups and within each there can be one to several agile teams. The bug tracking product we use has been "a leader since 1997" (their UI/usability seems to also be evaluated against that year even today) but my agile team or even group doesn't really control what is being used by the whole department. What we are looking to track is not necessarily product features but expansion/nice to have functionality for internal components that go into our product. So to name a few for example... framework/utility library on top of CppUnit which our developers share low-level IPC communications framework Common development SDK that myself and several other team leads started to help share some common code/tools at the department-wide level (this SDK is released as internal "product" to each of the groups). Is the standard practice to use the one bug tracking tool? Or would it make more sense to setup something more localized specifically for our needs and maintain it ourselves? It's also unclear how management will feel if developers start performing "IT" roles of maintaining software and servers. At the same time, right now, we use excel files, internal wiki and MS OneNote for this kind of stuff and that just doesn't feel right. (I'm afraid to ask for actual software recommendations, since that might make this question more localized or something. Also developers needs this way more than management, so it would be nice to find something either free or no more than the cost of a happy hour).

  Read the article

• A Simple Solution For NetBeans RCP Apps That Need A Groovy Editor

  - by Geertjan

  Take a look at Nils Hoffmann's metabolomic analyzer, especially at the Groovy editor contained within it: Obviously, it would be cool if the Groovy editor in the app above were to have syntax coloring and other editor features helpful in coding Groovy. However, as I showed in If You Include the Groovy Editor, there are multiple dependencies that the NetBeans Groovy support has on other modules that would be completely superfluous in the above application, while they'd make the app much heavier than it is, simply because of all the Groovy dependencies. But today I thought of a simple solution. Why not take the Groovy.g file (i.e., the ANTLR definition), such as this one [though that's probably not the most up to date one, wondering how to find the most up to date one] and then apply the content of this screencast (made by me) to the Groovy.g file: Within a few minutes, you should end up with Groovy syntax coloring. OK, so that's not a full blown Groovy editor, but syntax coloring is surely a cool thing to have in the app with which this blog entry started? Sure, this means creating a new Groovy editor from scratch. But the point is that doing so can be very simple, i.e., the syntax coloring can simply be generated via the simple instructions above. I'm going to try it myself in the next few days, but would be cool if others out there would try this too!

  Read the article

• what is the Web development process efficiency judgment criteria

  - by Ahmed safan

  I'm working as a web developer and I want to be able to determine if I'm efficient. Does this include the how long it take to accomplish tasks such as: Server side code for the site logic with one language or multiple php,asp,asp.net. Client side code like javascript with jquery for ajax, menus and other interactivity Page layout, html, css (color, fonts (but I have no artistic sense!)) The needs of the site and how it will work (planning) How can i judge how long it will take to complete a website? The site has CMS for adding and editing news, products, articles on the experience of the company. Also, they can edit team work, add Recreational Activities and a logo gallery with compressed psd download, and send messages to cpanel and to email. You are starting from scratch except JQuery and PHPmailer. How can I estimate how long the job will take, and how can I calculate the required time to finish any new projects? I'm so sorry for many scattered questions, but I'm in my first experiment and I want to take benefits from the great experience of those who have it.

  Read the article

• SQL Server 2005 / 2008 Licensing question

  - by Jose

  I have read up online, and through some threads here like this one. But I'm still confused and need to see if anyone can shed some light. My company is deploying a clickonce application that will be on multiple computers (about 50). It will be accessing an SQL Server database and I was wondering what kind of SQL Server licensing should I/need to have? The application currently logs in via SQL Server authentication using one SQL Server user. It seems logical that I would just need one user CAL and even through there will be up to 50 connections it should all still work. Am I right?

  Read the article

• Making an advertising server ads from different ad networks

  - by John

  In India there are many ad-networks(other than Adsense) who pay per acquisition or per lead. So Javascript ad code is not required(as fraud clicks don't matter as long as one converts). So an ad network will have many companies and each company will have many banner sizes for ads. Also suddenly any ad may be stopped just because company's target has met. Which is a common nuisance since if we don't remove those url's then that company will get conversions for free. I've a dozen sites and removing the ads are difficult every now and then. Also CPA based ads may not convert at all. That means I'll need to remove non-performing ads regularly. I've gone through: How can I show multiple ad networks on my site? . I've also visited DFP solution but without Adsense they wouldn't let me open account. I want to make an ad server wherein I'll feed new ads (banner image + link for click). I want to maintain categories there like ( shoes, phones, books etc). So if an ad is paused - i'll simply remove/pause the ad there while other ads in the category keep running. Also changing ad code within sites will no more be required. For example - let me have an ad category "clothing" where I can add ads from different companies. So if one of my site requests an ad from there it'll randomly select an ad in this category and return it to site for display. Removing/adding ads within this category will not affect the site requesting those ads. Any idea how to implement it?

  Read the article

• Excel; exporting/importing different columns to different csv files

  - by Sisyphus

  Is there a way to batch export different columns to different csv files in excel on an OSX, I'm thinking something along the lines of possibly automator, applescript or bash. I've had a look play around with automator and so far no look. The best I have accomplished export the whole sheet, then use sed to strip out what I don't need, however this is terribly inefficient. Also, is there a method, to batch import multiple csv files into columns. Thanks in advance && sorry I didn't tag excel correctly it wouldn't allow me to create the excel:mac tag

  Read the article

• PBX with Fax and Google Voice

  - by Phill Pafford

  Looking to replace/port my home number which I use for mainly faxing for my home business to a PBX server ( Thinking Asterisk or Elastix ). My question is: Does Asterisk/Elastix support Faxing ( Incoming / Outgoing ) Does Asterisk/Elastix support Google Voice Here is what I'm looking to do: Run some sort of PBX software from my own home server that will allow me to use Google Voice for my home number, possibly allow multiple Google voice ( Though I could live with just the one ) and must support Faxing ( Incoming and Outgoing ). Would Asterisk/Elastix support all of this or would you recommend something else for this? Looking to avoid some of the pitfalls that could happen I like Ubuntu if a Linux environment is needed

  Read the article

< Previous Page | 520 521 522 523 524 525 526 527 528 529 530 531  | Next Page >