Search Results

Search found 55281 results on 2212 pages for 'j set'.

Page 525/2212 | < Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >

• Lighttpd based server issues crop up when port forwarding

  - by michael

  I have four host computers running lighttpd webservers. they are sitting behind a hspa modem, which each occupying a http port between [81 - 84]. 80 is taken by the modem itself. The port forwarding is setup correctly, however, only a portion of any webpage I request from any of the hosts comes through (they all fails after %20 of the page). If I put the host on port 81 into the dmz, it serves pages fine. The others do not respond to the dmz treatment. Is it possible the web content on the hosts somehow require ports aside from their respective http port? Or is it possible that even though the server.port in the lighttpd_ssl.conf file is set, the individual hosts are still expecting to serve on port 80? I am not familiar with lighttpd, nor did i set them up. they are running on video encoders i purchased. I can grab any files from them required for further information on the problem.

  Read the article

• Copy data from Access to the next row in Excel

  - by edmon

  I have a MS Access database for a small Hotel. On the main form I have Guest Information fields...(Name, Address, Phone#, etc). I also have an Excel file that keeps track of bookings for the Hotel. The following code takes the Guest information from my form in Access and populates the labeled cells in my Excel file. Dim objXLApp As Object Dim objXLBook As Object Set objXLApp = CreateObject("Excel.Application") Set objXLBook = objXLApp.Workbooks.Open("Y:\123files\E\Hotel Reservation.xls") objXLApp.Application.Visible = True objXLBook.ActiveSheet.Range("B2") = Me.GuestFirstName & " " & GuestLastName objXLBook.ActiveSheet.Range("C2") = Me.PhoneNumber objXLBook.ActiveSheet.Range("D2") = Me.cboCheckInDate objXLBook.ActiveSheet.Range("E2") = Me.cboCheckOutDate objXLBook.ActiveSheet.Range("G2") = Me.RoomType objXLBook.ActiveSheet.Range("H2") = Me.RoomNumber End Sub Is there a way to, move to the next row in my Excel file, for a new guests info? EX. I take my first guests info and it populates row 2 of my Excel file. For my next guest it will populate row 3 of my Excel file and so on....

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by Mike Brion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• AWSTATS - manual update error (permissions)

  - by Lewis

  Error: Couldn't open file "/var/www/awstats/awstats032014.site.net.tmp.9198" for write: Permission denied Setup ('/etc/awstats/awstats.site.net.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). I get this error when manual trying to update awstats (via the browser link). I have set the folder permissions of /var/www/awstats/ to 775 and still get the error. If I create a new file on that folder the default permission setting set the permissions to 774 which should work.

  Read the article

• Restrict subversion to only allow certain functions

  - by Farseeker

  I'm in a bit of a situation. We have our private subversion server that we use for development, but one of our government clients is requesting access to our commit logs so that they can get an up-to-date picture of what we've been doing on the system. I don't have a problem with them reading our commit logs, but what I do have a problem with is them having access to our source code - they can't have read or write. The obvious solution is to do an svn log ourselves and give them an export, but they want direct SVN access as they apparently have an auditing solution that will import the svn log command automagically. So, is there a way I can set up access to a subversion repo and deny them access to everything except svn log? I don't care if I have to set up a virtualhost just for this, but it has to be done over http(s). We're also using LDAP for authentication if that makes any difference.

  Read the article

• How to secure a VM while allowing customer RDS (or equivalent) access to its desktop

  - by ChrisA

  We have a Windows Client/(SQL-)Server application which is normally installed at the customer's premises. We now need to provide a hosted solution, and browser-based isn't feasible in the short term. We're considering hosting the database ourselves, and also hosting the client in a VM. We can set all this up easily enough, so we need to: ensure that the customer can connect easily, and also ensure that we suitably restrict access to the VM (and its host, of course) We already access the host and guest machines across the internet via RDS, but we restrict access to it to only our own internal, very small, set of static IPs, and of course theres the 2 (or 3?)-user limit on RDS connections to a remote server. So I'd greatly appreciate ideas on how to manage: the security the multi-user aspect. We're hoping to be able to do this initially without a large investment in virtualisation infrastructure - it would be one customer only to start with, with perhaps two remote users. Thanks!

  Read the article

• iPhone VPN to iTunes Home Sharing [migrated]

  - by Philip Crumpton

  my goal is to set up a VPN on a Windows machine that contains my iTunes library then connect to that VPN with my iPhone and be able to utilize Home Sharing remotely. I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I quickly found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are two options (aside from buying a Mac): 1.) Existing utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN) 2.) Manually configure a VPN to allow Bonjour multicast (can't find any information on this) FYI my router is a Linksys WRT54GL running Tomato 1.28

  Read the article

• Preparing a hyper-v VM image

  - by Anteru

  We have a Hyper-V Windows Server 2k3, and we're hosting multiple VMs on it. However, right now, we always start the VM creation right on the server, i.e. when preparing a new Ubuntu image, I just install it into a new VM and set it up and when I'm happy we store the disk image. I wonder if there is a way to prepare a hyper-v image locally on my desktop machine instead? I'm running Windows 7, and I would love to be able to set up a VM so that we can copy the image over to the server and be done with it. This is for linux images only, and we definitely need the hyperv network integration. Is there a recommended way how to prepare hyperv images without running a hyperv instance somewhere?

  Read the article

• creating a subdomain on windows server

  - by jason

  Hi I'm trying to set up a sub domain for development on a windows server and am having problems setting the correct details in the httpd.ini file and hoped soemone could help. I have set up the subdomain http:// dev. website .com The files that I want to use for this subdomain are on the server in a folder called development http:// www. website .com /development in the directory structure they are in /htdocs/development What do I need to add the the httpd.ini file to point the http:// dev .website .com to file files located in the /htdocs/development folder on the server? Many Thanks

  Read the article

• Queue emails under linux

  - by md1337

  I have a slow distant mail relay server and a web application I'm using locks up when sending e-mails to that distant mail server, until the e-mail is sent. After the e-mail is sent the page comes back and the application is snappy again. SO I'm trying to set up a differed mail queue locally on the application server (linux) so that the application uses that instead of the distant mail server. My rationale is that e-mails would get queued up locally until they are processed by the distant mail server, but at least the application doesn't lock up. I have installed postfix and set up the relayhost setting to the distant mail server, but performance has not improved. What appears to happen is that postfix just forwards my SMTP instructions in real time and doesn't really queue them? What can I do? Thanks!

  Read the article

• Multiple EyeFinity Display groups

  - by Shinrai

  Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

  Read the article

• SSH tunnel doesn't work

  - by s1ck

  I am trying to use my server as a "proxy" with ssh. However, setting up tunneling with ssh -D localhost:8000 user@myserver does not work. I tested this on various machines with ssh and putty - It connects just fine, but when I set my browser settings accordingly, I just get an error "Connection has been reset". I tried monitoring the traffic with wireshark, but I didn't even see some tunnel-traffic. I explicitly set AllowTcpForwarding to "yes" but I still can't use the tunnel. When running ssh in verbose mode, I don't get any errors but debug1: Connection to port 8000 forwarding to socks port 0 requested. debug1: channel 3: new [dynamic-tcpip] debug1: channel 3: free: dynamic-tcpip, nchannels 4 What am I doing wrong?

  Read the article

• Can I swap a HDD from a RAID 1 for a bigger capacity drive?

  - by Gnuffo1

  I have a RAID 1 setup with two 500GB drives. So they mirror each other. I know that if I take one of them out and put in a new 500GB drive it will set it up so that the new drive will mirror the old one. My question is if I take out one of the 500GB drives and add say a 2TB drive, will it set up the 2TB drive to mirror the 500GB? I assume if it does, it will only allow me access to 500GB. However, if I then take out the one remaining 500GB after the data has been mirrored and stick in a 2TB, once that is rebuilt, will I then have a 2TB RAID setup with the same data as what was originally on the 2x 500GB setup?

  Read the article

• What is the most ethically or morally questionable sysadmin task you have been given?

  - by Alex Angas

  In the recent past I was asked to set up a reporting facility for upper management so they can spy on what web sites users are visiting. This was done without any notice given to users. Unfortunately, I have a good friend with some rather unusual tastes who I knew would be caught! He also knew I set up the reporting... To me, the lack of user notification was unethical. What similar experiences have you had that haven't "felt right" and left you questioning what to do? How did you deal with it?

  Read the article

• How to setup a scheduled task to run every 30 minutes? Windows Server 2003

  - by JL

  I'm having a problem running a scheduled task in Windows 2003 server, it ran for 4 hours, now it won't start up again. I will tell you exactly what I have done to create the task, please tell me if I am doing anything wrong. My objective is to have my task (console app) run every 30 minutes. I open control panel, scheduled tasks, add new scheduled task Browse for my application I want to run, a console app without any command line arguments I select, perform this task - Daily I select the start time (now 8:00 in the morning) Start date set to today Set the correct username + password Open advanced properties Repeat the task every 30 minutes for 24 hours Save and close. Anything wrong in the above mentioned steps I've implemented? Thanks in advance.

  Read the article

• Sql database dumps failing every night

  - by chaseman36

  Hey guys, I have sql05 and my maintenance plan which backs up a database to an external storage SAN, has been failing every night. Here is my error: Executing the query "BACKUP DATABASE [master] TO DISK = N'\\192.168.x.x\vmbackup\server\dbbackup\master_backup_201004222300.bak' WITH NOFORMAT, NOINIT, NAME = N'master_backup_20100422230002', SKIP, REWIND, NOUNLOAD, STATS = 10 " failed with the following error: "Cannot open backup device '\\192.168.x.x\vmbackup\server\dbbackup\master_backup_201004222300.bak'. Operating system error 5(Access is denied.). BACKUP DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. I googled this error and tried adding permissions to the backup device for network service as recommended at experts exchange, no dice. Does anyone have any ideas?

  Read the article

• Git SSH RSA keys

  - by Michael

  I thought I set up my key pairs correctly -- I can do git pulls. I can do git commits. But when I do a git push, it counts objects, decompresses, then says: fatal: the remote end hung up unexpectedly. What's the issue here? I'm a super user, so it's not folder writable / readable access problems -- it must be the way I set up the encryption key pair... how do I debug this ... since git pull works?

  Read the article

• Second vm not connecting to internet KVM

  - by potsed

  I cannot connect a second VM to the internet. I have two VM's set up and running, the first vm can connect to the Internet fine, the second does not even get a ping through. They are both set up in the same way with the same base packages but different secondary packages. Different sized disks etc. I am a noob with VM and perhaps I am missing something very simple. Like maybe that they have the same mac address or something. They are both using a bridged connection. Any help would be appreciated, and if you need logs please let me know which ones.

  Read the article

• Why can't my FreeBSD 6.1 (vmware player client under Win7) do DNS in Bridged mode.

  - by Walter Stickle

  I have a 64-bit FreeBSD 6.1 client, running under Windows 7 (64-bit) via VMWare player 3.0, with networking set to bridge mode. DHCP goes fine on boot... I get correct adress/gateway/nameserver info... I have good connectivity to the world in that I can ping any host I can name by IP addr, (including both of the nameservers in resolv.conf,) ...but I can't resolve any names. Inside the Windows box, the network interface has VMWare Bridge Protocol enabled, and the windows side of things has full connectivity. dig replies with: ;; connection timed out; no servers could be reached ...even if I use "dig @server_ip_addr" to point it at a pingable, working nameserver If I set VM networking to NAT mode, I can get outbound connectivity (with happy DNS) but, of course, can't do INBOUND connectivity, which I need. Thoughts?

  Read the article

• How can I redirect HTTPS(S) traffic to anothr gateway?

  - by PsyStyle

  I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. Al the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for this I am using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway without touching the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a dnat like DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case

  Read the article

• Resolving Domainnames differently for different services

  - by mlaug

  Some time ago we had an issue with our network infrastructure and php with curl. Our Network infrastructure is fairly simple. LoadBalancer/Firewall = 5 servers The Domainname of our website is set to the ip of the Loadbalancer, of course. But calling curl from one of the servers did result in a timeout. It appears that a server could not call for its own domain it is serving. So we had to set the domains via /etc/hosts to the sever itself. But now We have implemented a Varnish in front of the Loadbalancer, which we want to automatically purge, once a change on a page happens. So now we need to call the domain www.example.com/url_to_purge. Sadly this call what be resolved to the server itself instead of the varnish, because of the /etc/hosts entries. So now I am wondering, if you could resolve domain names differently for different services :)

  Read the article

• Mac OS X multi-user thin client server (terminal server)?

  - by username

  Is there any solution out there to turn a Mac into a true multi-user thin client server? I'd like to set up a few cheap PCs with access to a couple accounts using something like VNC, but it isn't economical to buy a new server for each user or a new license for virtualized OS X Server for each user. I'm fully aware that OS X Server lets you set up users with "network home folders," and I know there's also VNC built into Mac OS X. Neither of these fit the bill (the former requires a thick client, and the latter is single-user only) UPDATE: yay, Lion! http://www.9to5mac.com/54102/10-7-lion-allows-multi-user-remote-computing

  Read the article

• "ssh root@server" hangs indefinitely long

  - by Thibaut

  Hi, Sometimes my ssh client will take forever to login. This happens when the server is not responding (overloaded, killed processed, ...). My automated scripts will then fail because the ssh process will never exit. Is there a ssh configuration value to set a timeout in order to fail if ssh can't login after a predefined number of seconds? I know there are knobs on the server side, but I have to set this on the client side as the sshd process is not responding, or responding incorrectly. Thanks!

  Read the article

• Setting domain name to web application [on hold]

  - by aditk

  I have a website and I have kept the structure to be: Website Web Application 1 Web Application 2 Now, I want to access my website at example.com and access web applications using webapp1.example.com or webapp2.example.com; I have a control panel for my domain name from where I have set up a “web forward” to my server. From what I have done, I am getting to see my IP address when I type in domain name. Yes, I have disabled cloaking here! How I would like it to be is, when I access example.com and then navigate to other pages, they should be shown in the address bar, e.g. http://example.com/firstpage.aspx and so forth. Is the structure I have set up a good one?

  Read the article

< Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >