Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 525/761 | < Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >

  • Share the DVB card on windows 7

    - by Bashar Kernel
    I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

    Read the article

  • Hyper-V core NIC speeds and registry changes

    - by gary
    Good afternoon, On a Dell PE T610 I have Hyper-V core running, with 2 x Broadcom BCM5709C NetXtreme II GigE installed. I have noticed that copying large files 17GB for example, from a network physical server to the Hyper-V host local drive [not vm guest] is very slow in comparison to copying from Physical to Physical servers. Copying a 17GB file physical to Hyper-V host takes 30 minutes Copying a 17GB file physical to physical host takes 15 minutes Can someone tell me exactly what registry nodes I should disable on Hyper-V NICs to improve performance. So far I have gone to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class{4 D36E972-E325-11CE-BFC1-08002BE10318} and set the following to 0 on both physical NICs: *LSOv1IPv4 *LSOv2IPv6 *TCPUDPChecksumOffloadIPv4 *TCPUDPChecksumOffloadIPv6 Should I also disable *TCPConnectionOffloadIPv4 & *TCPConnectionOffloadIPv6? Many thanks in advance

    Read the article

  • Configure SQL Server to Allow Remote Connections

    - by Ben Griswold
    Okay. This post isn’t about configuring SQL to allow remote connections, but wait, I still may be able to help you out. "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server)" I love this exception. It summarized the issue and leads you down a path to solving the problem.  I do wish the bit about allowing remote connections was left out of the message though. I can’t think of a time when having remote connections disabled caused me grief.  Heck, I can’t ever remember how to enable remote connections unless I Google for the answer. Anyway, 9 out of 10 times, SQL Server simply isn’t running.  That’s why the exception occurs.  The next time this exception pops up, open up the services console and make sure SQL Server is started.  And if that’s not the problem, only then start digging into the other possible reasons for the failure.

    Read the article

  • DFS replication initial step problem

    - by vn
    Heya, I just setup DFS on my network and it's working fine, and now I'm trying to setup DFS-R on a test folder, but then at the end of the procedure (all went fine, selected my 2 folders, primary folder, replication topology and such) I get this error message (roughly translated from french) : Unable to define security on the replicated folder. The shared administration folder doesn't exist. I'm also wondering if there's any required security on the folders to replicate so that DFS-R can access it. I was trying to add SYSTEM in the security, but it won't find it/allow me. The folder has many many files and folders on the primary DFS pointer, but none on the 2nd, just created it with quite the same rights. Note that the primary DFS pointer is on a 2008 server and the DFS service and the secondary DFS pointer are on a 2008r2. Any help is very appreciated, thanks.

    Read the article

  • Windows Azure Database (SQL Azure) Development Tip

    - by BuckWoody
    When you create something in the cloud, it's real, and you're charged for it. There are free offerings, and you even get free resources with your Microsoft Developer Network (MSDN) subscription, but there are limits within those. Creating a 1 GB database - even with nothing in it - is a 1 GB Database. If you create it, drop it, and create it again 2 minutes later, that's 2 GB of space you've used for the month. Wait - how do I develop in this kind of situation? With Windows Azure, you can simply install the free Software Development Kit (SDK) and develop your entire application for free - you need never even log in to Windows Azure to code. Once you're done, you simply deploy the app and you start making money from the application as you're paying for it. Windows Azure Databases (The Artist Formerly Known As SQL Azure) is a bit different. It's not emulated in the SDK - because it doesn't have to be. It's just SQL Server, with some differences in feature set. To develop in this environment, you can use SQL Server, any edition. Be aware of the feature differences, of course, but just develop away - even in the free "Express" or LocalDB flavors - and then right-click in SQL Server Management Studio to script objects. Script the database, but change the "Advanced" selection to the Engine Type of "SQL Azure". Bing. Although most all T-SQL ports directly, one thing to keep in mind is that you need a Clustered Index on every table. Often the Primary Key (PK) is a good choice for that.

    Read the article

  • make vnc server listen on guest's ip address

    - by gucki
    My host system has the IP 192.168.0.250. Now I want to create a kvm guest using a tap device (so the network card of the guest just acts like a "real" one). The guest has a static ip 192.168.0.249 which it setups on his own (no dhcp). To connect to the guest using VNC I can to use the host's IP. So far everything works fine. Now I wonder how I can make the VNC server to listen on the guest's IP address, so I can use the guest's IP address to connect using my vnc client. Of course I cannot use -vnc 192.168.0.249:1 as this IP is not active on the host and so fails with Cannot assign requested address. Can this be done with tap networking at all? If not, how to get it working?

    Read the article

  • Will a database server perform better running on 2 CPUs with 16 cores or 4 CPUs with 8 cores?

    - by AlexOdin
    What I have: an online financial application (ASP.NET, C#) at peak we have 5K+ simultaneous users backend is running on Oracle 11g (active server + stand-by using Active Data Guard). At peak - 4K-5K database sessions Oracle is installed on Linux 5.8 (Oracle's unbreakable version) the database size: 7TB disk storage: NetApp (connected with 10GB network) I would like to replace old servers (IT will purchase HP blades BL685C). Servers will have 256GB of RAM. I need your help to figure out what to do with CPUs and cores. Options: 2 CPUs (2.3 GHz) with 16 cores each 4 CPUs (3.0 GHz) with 8 cores each Question: Which one should I pick? P.S. Next year, we will migrate from Oracle to SQL server. I hope, whatever option you recommend will work for both platforms

    Read the article

  • How to access apache behind home router?

    - by Filip
    Hi! I have public IP 89.103.xxx.yyy, then router and home network with 192.168.1.zz My router is set to portforward every 8056 on ip adress 192.168.1.5 (my PC), where apache is running. Apache listen is set to: Listen 127.0.0.1:80 Listen 192.168.1.5:8056 When i try: Listen 89.103.xxx.yyy:8056 I get message "unexpected end of apache" (I'm using easyphp for windows). Added: When i try to access 89.103.xxx.yyy via browser, it's prompting router request for authorization to access router web-settings. And when i try 89.103.xxx.yyy:8056, browser says that connection timed out =(

    Read the article

  • Does HP 8530w support Wifi 802.11n?

    - by FoxyBOA
    According to vendor site HP 8530w supports 802.11n draft mode. My Windows 7 tell me that network card is 5100 ABG and know nothing about N mode (guys from Intel forum mentioned, that 802.11N versions must ended with N letter, e.g. 5100 ABN). Not sure if it matter, but my laptop model id is #FU462EA. How could I check that my Wifi card compliant with 802.11n (I suspect that "draft N" could have two "special" meaning: doesn't work with 802.11n at all or requires special activation of the mode). Any hints are welcome.

    Read the article

  • How can I delete virtual networks from command line?

    - by David Cobb
    I have Hyper-V Server 2008 R2 (without GUI) running at my colo for a week. I was connected via RDP and could use the menu interface and command line. I figured out how to connect Hyper-V Manager from my Win7 laptop (THANK YOU HVREMOTE!), and created and installed my VM. I created a virtual network that didn't work (no connectivity from my VM) so I created another using different settings, and now have lost access to the Hyper-V host. No ping, no RDP. Since I don't have console access, I cannot troubleshoot. I believe if I deleted the Virtual Networks I'd regain access, but I need a command line instruction for this, that the staff onsite could enter to accomplish this. I find no help anywhere obvious (MSDN, etc), the keywords are too general. Can anyone refer me to simple steps how to do this over command line or with the menu based interface on the console?

    Read the article

  • Using JuJu with private Openstack cloud deployment?

    - by user76054
    I'm seeing a number of problems trying to use JuJu with our internally deployed Openstack cloud. Most of this appears to be centered around DNS host resolution as well as the need to deal with our company's internal HTTP proxies. Our Openstack deployment relies upon an unroutable 172.16.0.0/12 block of addresses for VLAN allocation to each project (tenant) hosted on our internal cloud. User's have the option of assigning one or more floating addresses to instances, allocated from a block of routable addresses on our internal companies LAN. Currently, Openstack doesn't register instance names with anything other than the DNSMASQ service running on the cloud controller. As such, there's no way to resolve this address through our internal DNS hierarchy (this issue has already been reported as Bug #945505). As such, even though I can bootstrap my JuJu server node, I can't connect to it with the JuJu client, since it can't resolve the local (private) network name. I am able to ssh to the node, once I've assigned it an internally routable (i.e. floating) address. Which leads to the next issue. Next, to install software on an instance running in our cloud, it must have our internal proxy address defined - either in the apt.conf file or via environment variables. Unfortunately, when bootstrapping the server node, there's no provision to pass this info into a instance via JuJu environment.yaml file (if this is even the best way to handle this issue). As a result, the bootstrap node is unable to install the required packages. I'm assuming (dangerous, I know) that the way that I've deployed Openstack in our internal environment is probably not unique. Has anyone else encountered these issues? And more importantly, are work arounds available? Regards, Ross

    Read the article

  • Server Core remote management from Windows 7 machine

    - by Robert Koritnik
    I've installed Remote Server Administration Tools for Windows 7 because I would like to administer my Windows Server 2008 R2 Server Core machine. The problem that I'm getting when I try to run Server Manager is: Connecting to remote server failed with the following error message: Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. This is what I've done so far: I'm running WinRM service on both machines (Server and Window 7) I've added my server to trusted hosts on my Windows 7 machine: winrm set winrm/config/client @{TrustedHosts="WINSRV2"} I've added registry entry on Windows 7 machine: reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v LocalAccountTokenFilterPolicy /t REG_DWORD /d 1 /f I've enabled Remote Management inbound rule on server firewall using CoreConfigurator 2.0 both machines are in the same subnet and when I search for network machines on Windows 7 I see my server. Question What else should I do to make it work? I would like to run several different remote management tools against my server machine.

    Read the article

  • Cannot connect to Musicbrainz VirtualBox through SSH using Mac

    - by olovholm
    I am trying to connect my mac terminal shell to a VirtualBox running the Musicbrainz server. I have configured the network through a BridgeAdapter and running ifconfig on both the host and the guest show corresponding IP addresses. I can now ping the guest, but I cannot connect through SSH. The verbose output from the SSH client on my mac states: (olaenv)hf-79-202:Python oclovhol$ ssh -vv [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 127.0.0.1 [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /Users/oclovhol/.ssh/id_rsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_rsa-cert type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

    Read the article

  • openwrt uses a single interface bridge?

    - by timbo
    My understanding of bridging is that it ties together two interfaces at layer 2. I am looking at a Ubiquiti Nanostation2 running OpenWRT that has an ethernet port 'eth0' and a wifi port 'ath0'. The ethernet port (the 'wan' port) is not part of the bridge and the bridge is just a single interface. Can anyone clarify this? - seems very different to Ubuntu. /etc/config/network: config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' config 'interface' 'wifi' option 'ipaddr' '192.168.13.1' option 'type' 'bridge' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ifname' 'wifi0'

    Read the article

  • ORACLE Fusion Middleware Summer Camps in Lisbon: Includes Advanced ADF Training by Oracle Product Management

    - by Frank Nimphius
    From July 9th - JUly 13th 2012, Frank Nimphius and Grant Ronald from the JDeveloper and ADF Product Management team present an 4 1/2 day advanced ADF Training Lisbon for the EMEA Oracle SOA Community. The training runs in parallel to an advanced WebCenter training giving you a chance to network with your peers during breaks and lunch. See below announcement by the ORACLE EMEA SOA Community for details:For Specialized partners who are working on following projects & opportunities, we (Oracle) offer these advanced summer camps:    ADF 11g     WebCenter Portal     SOA Suite 11g     ADF for BPM Suite 11     WebCenter Sites 11g All training sessions will be from HQ product management and our PTS team. The sessions will take place in July in Lisbon Portugal and Munich Germany. . Participation is limited to two people per company and bootcamp. Registration is handled by first come first serve, please pay attention to the skill requirements, the pre-requisitions and the follow up! We will not accept people onto the training who do not match the criteria!Lisbon: Monday, July 9th 11:00AM - Friday July 13th 16:00 PM (Lisbon time) ADF 11g advanced training by Grant Ronald and Frank Nimphius WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Cost: Free of charge, cancelation or no-show fee 2.000€Bootcamps are limited to 20 persons first come first serveFor details and registration please visit Lisbon registration page

    Read the article

  • Virtual server hardware to simulate 3-4 node web farm

    - by frankadelic
    I would like to get a dedicated server to run VMWare, VirtualBox, or similar. On this box, I would like to host 3-4 virtual instances of Linux, to act as nodes in a web farm. Performance is not that important, this would only be for testing and experimenting. I need something sub $1000 (including tax/shipping). Can someone recommend a pre-built server that would do the trick? I am pretty ignorant of hardware so building one is not going to work for me. Also, would I need multiple network cards to simulate a web farm or can the virtualization software handle that for me. Thanks

    Read the article

  • Mono on Linux: Apache or Nginx

    - by Furism
    Hi, I'm developing an ASP.NET application that will be run under Linux/Mono for various reasons (mostly to stay away from IIS, quite frankly). Of course the first web server I had in mind was Apache. But Apache, for all its advantages, adds a lot of overhead. Also, the application I'm building needs to be highly scalable and performance is one of the main concern. Apache has, obviously, a very good reputation and its record speaks for itself, but I don't need things like Reverse Proxy or Load Balancing because dedicated network devices would be used for that. So those modules from Apache will never be used. So basically my question is: since Nginx seems to fit exactly needs, is there any caveat I should be aware of? For instance, is Nginx renowned to be particularity safe? When security flaws are detected, how fast are they patched? Any insight on the pros and cons of using either of those servers in conjunction with Mono is welcome.

    Read the article

  • Again WPA Connection problem even after changed to latest version ..please help

    - by Renjith G
    I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

    Read the article

  • Windows 7 can't connect to via ethernet to Airpot Extreme

    - by Mr AJL
    I have an Airport Extreme, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

    Read the article

  • Underwriting in a New Frontier: Spurring Innovation

    - by [email protected]
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Susan Keuer, product strategy manager for Oracle Insurance, shares her experiences and insight from the 2010 Association of Home Office Underwriters (AHOU) Annual Conference, April 11-14, in San Antonio, Texas    How can I be more innovative in underwriting?  It's a common question I hear from insurance carriers, producers and others, so it was no surprise that it was the key theme at the recent 2010 AHOU Annual Conference.  This year's event drew more than 900 insurance professionals involved in the underwriting process across life and annuities, property and casualty and reinsurance from around the globe, including the U.S., Canada, Australia, Bahamas, and more, to San Antonio - a Texas city where innovation transformed a series of downtown drainage canals into its premiere River Walk tourist destination.   CNN's Medical Correspondent Dr. Sanjay Gupta kicked off the conference with a phenomenal opening session that drove home the theme of the conference, "Underwriting in a New Frontier:  Spurring Innovation."   Drawing from his own experience as a neurosurgeon treating critically injured medical patients in the field in Iraq, Gupta inspired audience members to think outside the box during the underwriting process. He shared a compelling story of operating on a soldier who had suffered a head-related trauma in a field hospital.  With minimal supplies available Gupta used a Black and Decker saw to operate on the soldier's head and reduce pressure on his swelling brain. Drawing from this example, Gupta encouraged underwriters to think creatively, be innovative, and consider new tools and sources of information, such as social networking sites, during the underwriting process. So as you are looking at risk take into consideration all resources you have available.    Gupta also stressed the concept of IKIGAI - noting that individuals who believe that their life is worth living are less likely to die than are their counterparts without this belief.  How does one quantify this approach to life or thought process when evaluating risk?  Could this be something to consider as a "category" in the near future? How can this same belief in your own work spur innovation?   The role of technology was a hot topic of discussion throughout the conference.  Sessions delved into the latest in underwriting software to the rise of social media and how it is being increasingly integrated into underwriting process and solutions.  In one session a trio of panelists representing the carrier, producer and vendor communities stressed the importance to underwriters of leveraging new technology and the plethora of online information sources, which all could be used to accurately, honestly and consistently evaluate the risk throughout the underwriting process.   Another focused on the explosion of social media noting:  1.    Social media is growing exponentially - About eight percent of Americans used social media five years ago. Today about 46 percent of Americans do so, with 85 percent of financial services professionals using social media in their work.  2.    It will impact your business - Underwriters reconfirmed over and over that they are increasingly using "free" tools that are available in cyberspace in lieu of more costly solutions, such as inspection reports conducted by individuals in the field.  3.    Information is instantly available on the Web, anytime, anywhere - LinkedIn was mentioned as a way to connect to peers in the underwriting community and producers alike.  Many carriers and agents also are using Facebook to promote their company to customers - and as a point-of-entry to allow them to perform some functionality - such as accessing product marketing information versus directing users to go to the carrier's own proprietary website.  Other carriers have released their tight brand marketing to allow their producers to drive more business to their personal Facebook site where they offer innovative tools such as Application Capture or asking medical information in a more relaxed fashion.     Other key topics at the conference included the economy, ongoing industry consolidation, real-estate valuations as an asset and input into the underwriting process, and producer trends.  All stressed a "back to basics" approach for low cost, term products.   Finally, Connie Merritt, RN, PHN, entertained the large group of atttendees with audience-engaging insight on how to "Tame the Lions in Your Life - Dealing with Complainers, Bullies, Grump and Curmudgeon." Merritt noted "we are too busy for our own good." She shared how her overachieving personality had impacted her life.  Audience members then were asked to pick red, yellow, blue, or green shapes, without knowing that each one represented a specific personality trait.  For example, those who picked blue were the peacemakers. Those who choose yellow were social - the hint was to "Be Quiet Longer."  She then offered these "lion taming" steps:   1.    Admit It 2.    Accept It 3.    Let Go 4.    Be Present (which paralleled Gupta's IKIGAI concept)   When thinking about underwriting I encourage you to be present in the moment and think creatively, but don't be afraid to look ahead to the future and be an innovator.  I hope to see you at next year's AHOU Annual Conference, May 1-4, 2011 at The Mirage in Las Vegas, Nev.     Susan Keuer is the product strategy manager for new business underwriting.  She brings more than 20 years of insurance industry experience working with leading insurance carriers and technology companies to her role on the product strategy team for life/annuities solutions within the Oracle Insurance Global Business Unit  

    Read the article

  • Allowing Remote Connection in IIS on Windows 7

    - by GiddyUpHorsey
    I'm trying to give access to a website in IIS on my Win 7 machine to another person on my network. He's unable to access it. I was wondering if perhaps it was because IIS isn't configured to allow remote connections (I seem to remember having to do this sort of thing on Win XP). I've hunted around in IIS and googled but am not finding a way to configure remote connections on Win 7. Some of the answers I've found seem to refer to Win Server 2008 and talk about a management service in IIS Manager, but it doesn't appear to be present on my machine.

    Read the article

  • Is it safe to use S3 over HTTP from EC2, as opposed to HTTPS

    - by Marc
    I found that there is a fair deal of overhead when uploading a lot of small files to S3. Some of this overhead comes from SSL itself. How safe is it to talk to S3 without SSL when running in EC2? From the awesome comments below, here are some clarifications: this is NOT a question about HTTPS versus HTTP or the sensitivity of my data. I'm trying to get a feeling for the networking and protocol particularities of EC2 and S3. For example Are we guaranteed to be passing through only the AWS network when communicating from EC2 to S3 Can other AWS users (apart from staff) sniff my communications between EC2 and S3 Is authentication on their api done on every call, and thus credentials are passed on every call? Or is there some kind of authenticated session. I am using the jets3t lib. Feedback from people with some AWS experience would be appreciated. Thanks Marc

    Read the article

  • Whew.... what a week!

    - by [email protected]
    Last week was a busy week for the UPK and Tutor teams at Oracle. It started with the the Collaborate Conference in Las Vegas and ended with our first UPK and Tutor Customer Advisory Board (CAB) meeting at Oracle HQ. The Collaborate Conference is a yearly event sponsored by three of the largest Oracle User Groups. • Oracle Applications User Group (OAUG) • Independent Oracle User Group (IOUG) • Quest - International User Group The User Groups are completely user run organizations with Oracle participation. If you've never attended a conference, time to start planning for the 2011 event in Orlando! If that's out of your reach, there are many regional and industry user groups that meet on a regular basis. They offer a great way to get involved, network with other users, and increase your knowledge around the Oracle applications. For a list of groups near you, check out the Oracle User Group Center. I'll add that the biggest meeting of Oracle users is at the Oracle Open World Conference in San Francisco in September, where we will have many UPK & Tutor focused development and customer sessions. More information on Oracle Open World will be forthcoming over the next few months. We hope to see many of you there! The CAB was a first for the UPK and Tutor team. Although we speak with customers regularly, this gave us an opportunity to meet in a more formal setting to discuss industry trends, business issues, and the direction of the products. Members serve a 2 year term and are required to attend 2 meetings per year, one in person, one via phone. We have some tweaking to do to our meeting format (most members wanted it to be longer!), but the overwhelming consensus was that it was a great success. There were many experiences and ideas shared and the wheels of the UPK and Tutor Development teams have been turning ever since. I'm sure you will see some of these discussions result in new product features over time. What a great week!

    Read the article

  • Secure external connection to SQL Server (from third party software)

    - by Bart
    I have a SQL Express 2008 R2 server running on a server in an internal lan network. A few databases are used by some third party software to store data. A SQL-Server user is used by this application to connect to the database. Now I need to access this database using a local installation of the software from an external pc. In this particular case a VPN connection is not the solution I am looking for. I have access to an external linux server, so I tried ssh tunneling from the windows server to the linux server and use the external pc to tunnel it back from the linux server to the client, but this is working very very slow. What are my other options to allow this external connection in a safe way?

    Read the article

  • How will technological singularity affect programmers?

    - by Amir Rezaei
    I'm one of the believers that think that we will hit the technological singularity sooner or later. Then the question is if any profession will be unaffected by changes that will come. In the end it will be we programmers that will implement the first self-aware AI. How will technological singularity affect us programmer? What is your professional opinion regarding technological singularity? EDIT: By self-aware I refer to an entity that questions and seek answers, able to analyze and solve problem. Artificial neural network is branch in mathematics/statistics with many widely used algorithms. The algorithms are applied where recognition of data is needed. For example hidden Markov model is used for voice recognition. Another well-known area is business intelligence and data mining. Today algorithms are self-learning. That is a bit of AI what many never think of. Let an ultraintelligent machine be defined as a machine that can far surpass all the intellectual activities of any man however clever. Since the design of machines is one of these intellectual activities, an ultraintelligent machine could design even better machines; there would then unquestionably be an ‘intelligence explosion,’ and the intelligence of man would be left far behind. Thus the first ultraintelligent machine is the last invention that man need ever make. Link to Ref.

    Read the article

< Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >