Search Results

Search found 38458 results on 1539 pages for 'remote access'.

Page 526/1539 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

• View httpd/lighttpd modules that are installed on shared hosting

  - by sdek

  I don't have access to the httpd.conf file on this shared host, but I wanted to see which modules are enabled/installed. Is there a (easy) way to find out without access to the httpd.conf file? For example, with PHP you can run a file that has phpinfo() in it to get the PHP info. Anything similar? The web server is lighttpd, which I understand is mostly compatible with apache httpd. (And yes, I am going to email the hosting support, but it sure would be nice to know for the future)

  Read the article

• Connectivity good between VMs, but no connectivity between host and VM

  - by Greg Sansom

  I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

  Read the article

• Using DNS in iproute2

  - by Oliver

  In my setup I can redirect the default gateway based on the source address. Let's say a user is connected through tun0 (10.2.0.0/16) is redirect to another vpn. That works fine! ip rule add from 10.2.0.10 lookup vpn1 In a second rule I redirect the default gateway to another gateway if the user access a certain ip adress: ip rule add from 10.2.0.10 to 94.142.154.71 lookup vpn2 If I access the page on 94.142.154.71 (myip.is) the user is correctly routed and I can see the ip of the second vpn. On any other pages the ip address of vpn1 is shown. But how do I tell iproute2 that all request at e. g. google.com should be redirected through vpn2?

  Read the article

• Need help making an ODBC MySQL Connection

  - by Andy Moore

  Short Version: How do I connect from PowerShell to an ODBC 5.1 MySQL Driver? I can't seem to find any connection strings that accurately have a "Provider" field for this particular instance. (See bottom of this question for examples/errors) ===== Long Version: I'm not a server guy, and I've been handed the task of setting up PowerGadgets on our network. I have a MySQL server running on a Linux box, that is configured for remote access and has a user defined for remote access as well. On my windows desktop PC, I have PowerGadgets installed. I installed the MySQL ODBC 5.1 connector, and went to Control Panel Data Sources and set up a User DSN connection to the database. The connection, user, and pass seem to be correct because it lists the tables of the database in my windows control panel. Where I'm running into trouble is in 3 places in PowerGadgets: When selecting a data source, I can select "SQL Server". Inputting the servers IP address does not work and I can't get this option to work at all. When selecting a data source, I can select "OleDB". This screen has a wizard on it, that appears to populate all the correct information (including database table names!) for me. "Test Connection" runs great. But if I try to complete the wizard, I get the error "The .NET Framework data provider for OLEDB does not support the MS Ole DB provider for ODBC Drivers." When selecting a data source, I can select "ODBC". This screen does not have a wizard and I cannot figure out a "connection string" that works. Typically it will respond with the error "The field 'Provider' is missing". Googling ODBC connection strings doesn't reveal any examples with a "provider" field and have no idea what to put in here. The connection string (for #2) above contains "SQLOLEDB" as a provider, and upon inputting that value into this connection string I get the same connection error that #2 gets. I believe I can solve my problems by figuring out a connection string for #3 but don't know where to get started. (PowerGadgets also allows for PowerShell support but I believe I will run into the same problem there) == Here's my current PowerShell connection that doesn't work: invoke-sql -connection "Driver={MySQL ODBC 5.1 Driver};Initial Catalog=hq_live;Data Source=HQDB" -sql "Select * FROM accounts" Spits back the error: "Invoke-Sql : An OLE DB Provider was not specified in the ConnectionString. An example would be, 'Provider=SQLOLEDB;'. == Another string that doesn't work: invoke-sql -connection "Provider=MSDASQL.1;Persist Security Info=False;Data Source=HQDB;Initial Catalog=hq_live" -sql "select * from accounts" And the error: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

  Read the article

• Nginx phpmyadmin redirecting to / instead of /phpmyadmin upon login

  - by Frederik Nielsen

  I am having issues with my phpmyadmin on my nginx install. When I enter <ServerIP>/phpmyadmin and logs in, I get redirected to <ServerIP>/index.php?<tokenstuff> instead of <ServerIP>/phpmyadmin/index.php?<tokenstuff> Nginx config file: user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 2; #gzip on; include /etc/nginx/conf.d/*.conf; } Default.conf: server { listen 80; server_name _; #charset koi8-r; #access_log /var/log/nginx/log/host.access.log main; location / { root /usr/share/nginx/html; index index.php index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root /usr/share/nginx/html; try_files $uri =404; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; } location /phpmyadmin { root /usr/share/; index index.php index.html index.htm; location ~ ^/phpmyadmin/(.+\.php)$ { try_files $uri =404; root /usr/share/; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $request_filename; include fastcgi_params; fastcgi_param PATH_INFO $fastcgi_script_name; } location ~* ^/phpmyadmin/(.+\.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt))$ { root /usr/share/; } } } (Any general tips on tidying op those config files are accepted too)

  Read the article

• How can I remove UNC password from a file

  - by freddoo

  Hi we have an mp4 file on our web server in a virtual directory When we try to access the file we get prompted for a username/password. When I tried to change the path of the virtual directory I got the message 'The following child nodes also define the value of the "UNCPassword" property, which overrides the value you have just set ...' which included the mp4 file that we try to access. How can I remove the UNC Password securing the file? The file is not on a shared drive its on the same drive as the web site root. The funny thing is the path of the virtual directory is not a UNC path it's a full path on the same server d:.....

  Read the article

• Anonymous user permission issue in SharePoint Server

  - by George2

  Hello everyone, I am using SharePoint Server 2007 x64 and Windows Server 2008 x64. I have setup a site with template publishing portal. I have grant anonymous access to all the site. My question is, if I create a new page, how to grant permission to anonymous user to access (read permission) the page? I got this confusion because, for the permission setting of a page, a permission is set according to a user name (e.g. read permission for user "foo" of a page). Since anonymous user does not have a related "user name", how could I grant read permission to anonymous user? BTW: I use Windows Forms authentication and Windows NTLM authentication for my sites. Thanks in advance, George

  Read the article

• route lan traffic through wirless mifi

  - by Randall Blake

  I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

  Read the article

• Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe

  - by Kyle Noland

  I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

  Read the article

• Getting apache to use ldap group and filesystem group information

  - by Angelo

  We have an Apache server which serves out of a particular directory, and just supplies a listing of files. From this directory, each subdirectory is owned by a certain group of users (at the filesystem level). User groups are determined by a posixGroup in ldap. Is there any simple way I can tell Apache to authorize access based on filesystem permissions, just like if the users were to access the filesystem from a shell? I would like to be able to simply add users/groups/directories without having to add another Directory or Location directive in Apache's conf?

  Read the article

• windows server 2003 - terminal server - hide taskbar

  - by s.mihai

  Hello, We've got arround 25users connecting to our terminal server (remote desktop) - no active directory is used. How can i hide the taskbar from the bottom of the page, not to auto-hide it. i want the users not to be able to use it (except the administrators of course). Mike

  Read the article

• setting documentroot in apache

  - by fusion

  i've set the documentroot in httpd.conf as: DocumentRoot "C:\Users\user1\Documents\WebProjects" if the files are located in WebProjects, they work; however if i create a sub folder [project] in WebProjects and access them via the browser, it doesn't load. for example, if i create a folder 'test' in WebProjects and a php file called test.php and call it: localhost/test/test.php . .this won't work and give the error of file not found on server. but if i put all the files in WebProjects itself, ie. test.php in WebProjects, it will work [localhost/test.php]. this makes my WebProjects folder look very cluttered with different files of different projects strewn around. and it isn't practical either. i'm new to using apache and hence would like to know how to set the document root such that i can access and load all the Projects/folders in WebProjects.

  Read the article

• Sharing laptop's internal optical drive running windows XP Media Center Edition with Netbook running

  - by Col

  just got a new HP netbook with no optical drive and guide said I should be able to share the optical drive of another windows computer. The netbook is running Windows 7 and the laptop, also HP, with the internal optical drive is running Windows XP Media Center Edition. I have wireless network that both the laptop and netbook access without a problem. The instructions did not seem to work in my case. When I right clicked on Properties of the optical drive and went to the Sharing tab, there was no selction for Advanced Sharing as the instructions said. XP made me go to Network wizard and set up a network, (which I already had). After doing that I could not access the drive from Windows 7. Has anyone benn able to do this?

  Read the article

• how to best config for synflood setup in csf but web response still fast

  - by Binh Nguyen

  my server down random every day 4-5 time cause get high load very quick.. I have install csf and with some config server now stable.. load around 5. BUT the big isuse is : the real user very hard to access website specially from IE browser you can test at xaluan.com the flowing is config using in csf: SYNFLOOD = "1" SYNFLOOD_RATE = "100/s" SYNFLOOD_BURST = "10" CONNLIMIT = "80;30" PORTFLOOD = "80;tcp;70;5" CT_LIMIT = "29" # other config may same as default i playing around with this config for a week but still not work around.. If increase the rate SYNFLOOD_RATE = "140/s" or more.. the website response very fast.. be side have bad effect of server load increase so fast normal 20 and may be up to few hundred in peck time .. my need is response time fast but load still low.. please help thanks ps: server runing nginx frontend, apache, mysql, php ,, the home page has around 70 elements which will cached in browser in fist time access..

  Read the article

• Connecting desktop computer to the internet through laptop wifi

  - by Josh

  Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

  Read the article

• Apache gives empty reply

  - by Jorge Bernal

  It happens randomly, and only on moodle installations. Apache don't add a line in the logs when this happens, and I don't know where to look. koke@escher:~/Code/eboxhq/moodle[master]$ curl -I http://training.ebox-technologies.com/login/signup.php?course=WNA001 curl: (52) Empty reply from server koke@escher:~/Code/eboxhq/moodle[master]$ curl -I http://training.ebox-technologies.com/login/signup.php?course=WNA001 HTTP/1.1 200 OK The apache conf is quite straightforward and works perfectly in the other vhosts <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /srv/apache/training.ebox-technologies.com/htdocs ServerName training.eboxhq.com ErrorLog /var/log/apache2/training.ebox-technologies.com-error.log CustomLog /var/log/apache2/training.ebox-technologies.com-access.log combined <FilesMatch "\.(ico|gif|jpe?g|png|js|css)$"> ExpiresActive On ExpiresDefault "access plus 1 week" Header add Cache-Control public </FilesMatch> </VirtualHost> Using apache 2.2.9 php 5.2.6 and moodle 1.9.5+ (Build: 20090722) Any ideas welcome :)

  Read the article

• Reliable cheap or free DNS service?

  - by superwormy

  I'm looking for a reliable free or cheap DNS service. I've used FreeDNS at FreeDNS.Afraid.org in the past, but it doesn't always seem reliable... sometimes people say they can't access my website (sometimes I can't access it either) by domain name, and yet if I type in the IP address it works fine, so I assume it's some sort of DNS problem. Are there any other cheap or free DNS services out there? I need something reliable that I can manage via a web interface (or scripts if they have an API) that I can use to manage the DNS for ~100 domain names. EDIT: To be clear, I'm looking for DNS hosting, not DNS servers to use for my WAN connection.

  Read the article

• Prevent scp from copying local files?

  - by ashcatch

  I just read the Linux scp command issue question and it reminded me that I regularily forget to specify the colon in the host part of a scp command, and thus copying a file locally instead of copying to a remote host, e.g. I do scp foo host instead of scp foo host: But I never use scp to copy a file locally. So I wonder if there is a way to make scp fail if both (the source and destination) arguments refer to local files.

  Read the article

• Linux scp command issue

  - by George2

  Hello everyone, I am using scp command to copy file from a MacBook Pro OS X 10.5 to another Linux box (Red Hat Linux Enterprise 5). I am using the following command on Mac, sudo scp ~/.ssh/mykey.rsa [email protected], there is no output from Mac command line. I am not sure whether the scp is success or not. Where is the location the file mykey.rsa on remote computer 10.10.100.101? thanks in advance, George

  Read the article

• Options for a site-specific-browser app

  - by cbp

  I would like to have our intranet site accessed through Firefox or Chrome, rather than IE. However we don't want users having access to any other internet sites apart from our intranet, unless they are using IE. I notice that Chrome has what they called 'Hosted Apps' and there is a Firefox spinoff called Prism. Does anyone know whether either of these are suitable? Can you install a Chrome hosted app without giving the user access to other sites through Google Chrome? What about Prism? Are these products stable?

  Read the article

• How to restrict Apache Location directive to cetain sub-domain?

  - by ohho

  On our server www.example.com, we use the <Location> directive to proxy traffic to a back-end server: <Location /app1> ProxyPass http://192.168.1.20 </Location> Then we added a sub-domain uat.example.com which points to the same IP address of www.example.com. We want to use it as a proxy for client to test an app being developed. Hopefully, the client can access via: http:/uat.example.com/app2_uat Now if we add a Location: <Location /app2_uat> ProxyPass http://192.168.1.30 </Location> The client can access both: http:/www.example.com/app2_uat http:/uat.example.com/app2_uat How can I restrict Location such that only: http:/uat.example.com/app2_uat is accessible? (i.e. http:/www.example.com/app2_uat should not be accessible.)

  Read the article

• How to SSH to guest ubuntu OS in vmplayer4

  - by Grace

  I have installed vmplayer4.0.4 on Windows7, and install ubuntu12.04 as Guest OS. Basically i have two problems: Default vmplayer use NAT for network access. I could ping the guest OS from the Host OS. But how could i access the Guest OS from outside the Host OS? If i change to Bridged Mode, sure the Guest Ubuntu OS could get DHCP ip in the same subnet as Host OS. But i could not ping the Guest OS from the Host OS, or vice versa, even if i disable the iptables firewall on Ubuntu Guest OS like following: iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT I could not figure it out, could anyone help on this issue? Thanks in advance.

  Read the article

• The RPC services keeps stopping

  - by oshirowanen

  For some reason, the RPC service keeps stopping which prevents me from remoting into the server. When this happens I have to manually make my way to the server to restart it as simply starting the service (which does not complain when starting), does not let me remote into the server. I have to restart the server manually to be able to remove into the server again. It seems to be happening a few times a day. Does anyone know why this might be happening?

  Read the article

• ESXi and Networking Devices

  - by EsxiUser

  I have two intel pro 1000 pt nics. One quad and one dual port. I want to assign all nic ports to a VM. I enabled PCI passthrough on all devices but ESXi will only allow me to add two nic ports until it tells me the maximum number of pci devices have been added. I have also tried setting up a virtual switch but it didn't seem like this would give full access to the nics. What is the best way to setup the nics to the VM has direct access to them? This is for a firewall VM.

  Read the article

• Emacs/tramp: sudo to root on localhost hangs after asking for password

  - by jae

  Can't use the su method, since I don't really want to veer from the Ubunut default too much. ssh is right out (for localhost? I ask you!). It shows a "Waiting fro prompts from remote shell". And that's it, apparently. Or is it just that incredibly slow?

  Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >