Search Results

Search found 18842 results on 754 pages for 'the machine'.

Page 526/754 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

• Where might I be having problems with making web server acessable (XAMPP)

  - by Erx

  I've installed XAMPP and it seems to be working - sort of. It will serve pages if I access it via http://localhost or 127.0.0.1 but not if I use the actual IP address I have. I thought it might be a firewall issue, so I turned off the firewall and the issue still remains. I don't have enough experience to know where to look next, so I thought I might get some advice here. Running on Vista. The error I'm actually getting it "Timed Out". I've had XAMPP running on this machine prior, but I've had to reinstall my OS/new hard drive ... and I can't seem to get it working.

  Read the article

• Mount a remote Linux hard drive as another Windows 7 partition during boot?

  - by zhuanyi

  I would like to mount a hard drive on a remote computer (running on CentOS 6) as a Windows drive so that I can install programs to that drive. The primary hard drive for my Windows machine (which is at home) is pretty small, I have a Linux server sitting in a remote data center with a much larger hard drive and allow me to install more stuff. I know most of you are going to say Samba, unfortunately the biggest problem for me in this case is that I can not mount Samba as a network share unless I start OpenVPN or SSH tunneling first, which is not good for my case because I will install some startup programs to the remote drive as well. Therefore, the remote drive has to be ready and work just like another drive BEFORE any of the startup programs start to load. Is that possible? My home PC has Windows 7 Professional 32 bit installed and the remote server is a Xen virtual server running on CentOS 6. I have admin/root permissions for both. Thanks a lot!

  Read the article

• How to install a mmc certificate on Windows?

  - by Alex

  I am not familiar with Windows very much, and I have trouble installing a MMC certificate. I am following this description to use MMC to create a certificate, but I cannot complete the step labeled ' Install or view the certificates under:'. There is nothing unter 'ConsoleRoot' - 'Certificates (Local Computer)' - 'Personal', and when I try to find the certificate I cannot find it. There is another page with nice screenshots, which works until step 9 when I am about to choose the certificate file. I do not know where this file is been created, if at all. How can I create/install/import this certificate? I require this in order to use the powershell Enter-PSSession from a remote machine...

  Read the article

• Cause of lost partition replaced by 2 Raw partitions

  - by DwightSampsonite

  Hi, I had a curious problem over the weekend... My 500gb WD hard drive all of a sudden could not be discovered by xp, then when I plugged in again via USB it was being discovered as 2 separate Raw partitions that were asking to be formatted. I have never modified partitions on this drive before. I was scratching my head for about this for 20mins or so when my second 1TB external hard drive did the exact same thing(with the same sized raw partitions as the 500gb). I have since recovered the original partitions and data using Testdisk . I am more curious on the cause.... I suspect this could be a virus, however my machine hadn’t been online in a few days and AVG didn’t detect anything. Has anyone seen this before?

  Read the article

• use correct-resolution background desktop image

  - by Rob Bos

  I have a desktop background image (a picture) in a half-dozen different resolutions, that I'd like to deploy to a disparate collection of computers with different monitors and video cards and whatnot. Laptops, netbooks, desktops, widescreen, and even a couple of "tall" screens. I have images to cover most of the cases. I would like Windows 7 to correctly pick the correct desktop background image via group policy. Now, the logon screen is already done. The OEMBackground method is rather clever, and lets you copy files of different resolutions to the machine, and the logon app will calculate the aspect ratio of the monitor and match it to a file as closely as possible. Is there any way to have that functionality on the desktop background as well?

  Read the article

• X11 forwarding through SSH

  - by martinjlowm

  I have been playing around with X11 forwarding the past few hours and so far I've managed to forward my desktop pc's X Server to my laptop, using X11VNC as server and X2VNC as client. X2VNC uses Xinerama to provide a dual-screen-like behavior between my laptop and my desktop pc. It's actually really great! I know that most Linux systems run Xorg and desktop environments on TTY7. Therefore I was thinking, is it in any way possible to have the VNC-tunnel tied to it's own TTY? It would be great to be able to switch forth and back between two TTY's in order to choose which machine to manage. And I would like this approach more than using Xinerama or a GUI.

  Read the article

• Resolve local subdomain on apache for paths within user dir

  - by MaoPU

  On Apache 2.2.x I've activated mod_userdir. I used the default setup, so that http://localhost/~name/ will be connect with ~name/public_html/ and a path within public_html, e.g. ~name/public_html/mySite can be reached through http://localhost/~name/mySite. How can I achieve, that the same path can be reached through http://mySite.name.localhost/? I don't want a manual approach like it is suggested in other SF questions (such as http://serverfault.com/q/133921/53624), but rather want an automatic mapping of all available paths to the corresponding URL. I think, several steps will need to be taken: Change mod_userdir configuration, so that the subdomain of localhost will be connected with all available user names on the machine. The second step would maybe include the usage of mod_rewrite, so that the subsubdomain could be matched to the path within ~name/public_html... What would be your prefered way?

  Read the article

• Setting CPU cores off-limits to all threads not specified (preferably in Windows 7)

  - by Shinrai

  I have a really specific machine configuration in the works that would really be helped out if there were any way to do this...basically what I'm looking for is the opposite of setting CPU Affinity for a process. I want to be able to tell Windows "No applications except [x] are allowed on [these cores]." Is there any mechanism whatsoever for doing this? (Yes, I am aware of some of the potential issues this could cause and I normally would never fool with processor affinities, since the OS usually does a damned good job itself, but this is a pretty odd situation involving some software that is very CPU-bound constantly having to wait on interrupts and DPCs and things from other threads.)

  Read the article

• Setting up a copy of a site with IIS 7?

  - by SJaguar13

  I have a site running on IIS with a dyndns.org domain that points to the IP of the Windows 2008 machine hosting it. I need a copy of that site for development purposes. I set up another folder with all the files, and create a new site in IIS. I don't really have a domain for it, so I was just going to use the IP address. When I go to localhost, 127.0.0.1, or the internal IP, I get bad hostname. If I use the IP address on port 80 (the same as the real version of the site), I get 404 not found. If I use a different port so I don't have them both on the same IP with the same port, I get connection timed out. How do I go about setting this up?

  Read the article

• Is full partition encryption the only sure way to make Ubuntu safe from external access?

  - by fred.bear

  (By "external access", I mean eg. via a Live CD, or another OS on the same dual-boot machine) A friend wants to try Ubuntu. He's fed up with Vista grinding to a crawl (the kids? :), so he likes the "potential" security offered by Ubuntu, but because the computer will be multi-booting Ubuntu (primary) and 2 Vistas (one for him, if he ever needs it again, and the other one for the kids to screw up (again). However, he is concerned about any non-Ubuntu access to the Ubuntu partitions (and also to his Vista partition)... I believe TrueCrypt will do the job for his Vista, but I'd like to know what the best encryption system for Ubuntu is... If TrueCrypt works for Ubuntu, it may be the best option for him, as it would be the same look and feel for both. Ubuntu will be installed with 3 partitions; 1) root 2) home 3) swap.. Will Ubuntu's boot loader clash with TrueCrypt's encrypted partition? PS.. Is encryption a suitable solution?

  Read the article

• What is OpenSVC?

  - by sh-beta

  OpenSVC was just ported to the FreeBSD platform. The little blurb in that announcement intrigued me so I went to the OpenSVC website and found this: OpenSVC is a 'service' manager, as in clustered service manager, designed for real-world heterogeneous datacenters and large-scale operations orchestrator (disaster recovery, for example). Services are collections of resources (virtual machine, ip, disk groups, filesystems, file synchronizations, and application launchers). Services can be started, stopped and queried for status, providing a consistent command set for wildly different service integration types. Service configurations, status and logs are pushed to a central database coupled to a web front-end (collector). Services can be administered using the stand-alone GPLv2 software stack deployed on the nodes (nodeware), or through the web-front end. Plus some UML-type graphics. Which is all neat, but I still don't understand: what does it do? Am I just being dense? What's the use case for this system?

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• Explorer fails to load with UAC enabled

  - by user37679

  While running an InstallShield based installer, my Windows 7 machine became unresponsive. After forcing a reboot, I can log in to the system, but explorer does not run. I can log in as a different user without issue and when I change UAC to its lowest setting, I can log in as the user that was performing the install. However, if I re-enable UAC, I am unable to get explorer to run again on login. I have checked the HKCU\Software\Microsoft\Windows\CurrentVersion\Run and RunOnce, but don't see anything that isn't configured to run on startup. I completed the installation of the software as the "good" user without issue.

  Read the article

• How to tunnel local port through proxy server?

  - by Joe Casadonte

  I have a non-proxy-aware program that I need to get working through an HTTP proxy server. The program (MYPROG) running on a machine I can configure at will (MYSRV) connects to a specific server (DESTSRV) on a specific port (DESTPRT). There is an existing HTTP proxy server (PROXYSRV:PROXYPRT) that will allow the traffic through if MYPROG was proxy-aware, but it isn't. Is there a way to listen locally on a specific port and forward the traffic through the proxy server? I can totally configure where MYPROG points to, so I could point it to MYSRV:4545 with the thought that some wonder program will redirect the data to DESTSRV:DESTPRT through PROXYSRV:PROXYPRT. I'm thinking IP Tables or netcat could do the trick if only I could figure them out... Thanks!

  Read the article

• Use SSH reverse tunnel to bypass VPN [on hold]

  - by John J. Camilleri

  I have shell access to a server M, but I need to log into a VPN on my machine L in order to access it. I want to be able to get around this VPN, and I've heard I can do this by creating a reverse SSH tunnel and using a intermediate server E (which I can access without the VPN). This is what I am trying: Turn on VPN on L, open SSH session to M On M, execute the command: ssh -f -N -T -R 22222:localhost:22 user@E From L, try to open SSH session to E on port 22222, hoping to end up at M Step 2 seems to work without any complaint, but on step 3 I keep getting "connection refused". I have made sure that port 22222 is open on E: 7 ACCEPT tcp -- anywhere anywhere tcp dpt:22222 I'm pretty new to SSH tunnelling and not sure what the problem could be. Any ideas what I can try?

  Read the article

• Strange filesystem behavior, Ubuntu 9

  - by Fixee

  I have two windows open on the same machine (Ubuntu 9, ia32, server). I'll call these windows W1 and W2. W1: $ cd ~/test $ ls sample $ In W2 I run "make" from a parent directory that recreates file test/sample: $ make project . . $ cd test $ ls sample $ Now, returning to W1: $ ls $ cd ../test $ ls sample $ In other words, after I build from another window and the file test/sample is replaced, ls shows the file as missing in the 2nd window until I cd ../test back into the directory whereupon it reappears. I can give more details if required, but just wondering if this is a well-known behavior.

  Read the article

• CF64 on Server 2008x64 breaks pretty much everything else, how to fix?

  I just installed CF64 on a WinServer2008x64 machine. Previously a whole array of classic ASP and ASP.Net apps were functioning, after the CF install they're not. I'm getting an http 500 on everything not coldfusion. I believe it's a mapping issue. CF seems to have dropped a wildcard handler mapping into the IIS config Module IsapiModule Notification ExecuteRequestHandler Handler AboMapperCustom-89420 Error Code 0x800700c1 The upside (if you can call it that) is that the CF install took and seems to be functioning. It appears to have dropped in

  Read the article

• Unable to install visual studio 2012 on windows 7

  - by Nirvan

  I was attempting to install Visual Studio 2012 Express Version on windows 7, but got the following error. The error talks about some Interop Assem, which I believe is related to Microsoft Office. I tried to install the Interop Assem, but it seems that they cannot be installed for Starter Versions of the Microsoft Office. So, how do I go about installing Visual Studio 2012 on my Windows 7 machine, without full version of Microsoft Office installed, Or the error is related to something else. Update: I have tried to install the following Interop Assem but the installation terminates without any status.

  Read the article

• Restore Point area getting deleted

  - by PaoloFCantoni

  Hi, I'm running a multi-boot scenario (which I have been successfully on a number of machines for a number of years). I have Windows 7 (32 bit) on one partition and Windows 7 (64 bit) on another and a common data partition (which happens to store the user hives for each OS instance). For some reason, on one particular machine (a HP Pavilion notebook) the restore points get trashed after a reboot. I can create them (both manually and automatically), but after some (but not all) reboots the restore points get trashed. I have all three partitions set (on both OSs) to hold restore information. This setup has worked successfully on other machines for at least 12 months. I'm out of ideas... I DO need the restore points as I do "bleeding edge" stuff and they've saved my bacon on other machines in the past... TIA, Paolo

  Read the article

• Can't access to a iSCSI volume

  - by jmiguel.rodriguez

  I have a iSCSI target on a customer place I'm using from an old Fedora (Core6) server. I configured it and formatted as ext3 (mistake, now I know) and I've been working with it for some time. Now I need to access this volume from other machine. As far as I've read, I can't do it safely from two machines at the same time (yep, that's the first thing I tried). So I've umount it from original server and tried to mount it on the new server (I did it at first with Ubuntu 10 LTS but when I was unable to do it I installed another Fedora with the same configuration) with no success. The problem: I can see all target on NAS but when I do a "fdisk -l" to see all devices and know which mount I see all targets as SFS filesystem. From the original server I see all SFS (after all, they belong to my customer and don't know what he have in) except the one I manage which I see as 'Linux'. What can I do? Thank you in advanced, regards, jmiguel

  Read the article

• Setting up linux server with multiple access rights

  - by Mark

  I am a graduate student and want to set up a linux server (preferably Ubuntu) in my office. I also want to give my friends SSH access to that box. My question is can I set up my server such that I can give one of my friends rights to install software on my machine but he cannot brows around outside the directory he is allowed to? Can I set up multiple apache instances (on different ports) for different people? so each has access to their own apache instance?

  Read the article

• What could be causing LVM errors on first boot after install in Debian?

  - by ianfuture

  Hi, I've installed Debian (lenny) on a machine at home. It was set up during install to have a /boot partition, then the rest was encrypted, then had an LVM ontop of that, then all the other partitons inside LVM. After install completed and on first boot it asked for password to un-encrypt(same password for both drives) then it showed an error which said LVM could not find a physical device with a particular UUID or something similar. LVM install is over two HDs. One is 120GB and one 40GB. 120GB is Master on its IDE cable and this has /boot on it. 40GB is slave on the other IDE cable. Is there anything that could be done to rescue this install? Or diagnose problem? It took ages to get installed due to time spent enrypting drives and I'd rather not go through that again. :( Thanks.. Ian

  Read the article

• Site on IIS 7.5 accessible via SSL on server, but not from local network

  - by bnieland

  I have a site set up on IIS 7.5. I added the following binding... type: https Host Name: [Blank] Port: 443 IP Address: 192.168.1.6 Binding Information: [Blank] I can access the site via https://192.168.1.6 from the server itself. When I try to access the site from another machine (193.168.1.4) on the same sub-net via https://192.168.1.6 I get no response. http://192.168.1.6 returns the site as expected. I have used wireshark to examine the packets on the server, the first of which I have included as an image. There were two other packets, very similar to this. There was no response from the server. Any Ideas?

  Read the article

• Configure clients to navigate through specific wan. Pfsense

  - by leandronn

  I have a machine with a pfsense running. It is configured with three ethernet cards. LAN 192.168.2.1/21 WAN1 200.41.X.2/24 WAN2 200.41.X.3/24 ISP Gateway 200.41.X.1 This is a connection with 5 different IP addresses. WAN1 and WAN2 are directly connected to my ISP router. I need a way to configure some clients navigating through WAN1 and some through WAN2. I am new to pfsense so, please, if you can send me some examples to do this. I can add two squids if it is necessary. Thanks a lot.

  Read the article

• Finding the length of files and file path of directory structure in a Linux file system.

  - by Robert Nickens

  I have a problem on a Linux OS running a version of SMB where if the absolute path to a directory within a Shared Folder is greater than 1024 bytes and the filename component is greater than 256 bytes the SMB service crashes and locks out all other services for network access like, SSH and FTP rendering the machine mute. To keep the system for crashing I’ve temporarily moved a group of folders where I think the problem path may be located outside of Shared Folder. I need to find the file and file path that exceeded this limitation and rename them or remove them allowing me to return a bulk of the files to the Shared Folder. I’ve tried the find and grep commands without success. Is there a chain of commands or script that I can use to hunt down the offending files and directory? Please advise.

  Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >