Search Results

Search found 16911 results on 677 pages for 'top hat'.

Page 526/677 | < Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >

• Why does 64-bit Windows need a separate "Program Files (x86)" folder?

  - by Stephen Jennings

  I know that on a 64-bit version of Windows the "Program Files" folder is for 64-bit programs and the "Program Files (x86)" folder is for 32-bit programs, but why is this even necessary? By "necessary", I don't mean "why could Microsoft not have made any other design decisions?" because of course they could have. Rather, I mean, "why, given the current design of 64-bit Windows, must 32-bit programs have a separate top-level folder from 64-bit programs?" There are plenty of questions on Super User and elsewhere that assert "one is for 32-bit programs, one is for 64-bit programs", but none that I can find give the reason. From my experience, it doesn't seem to matter whether a 32-bit program is installed in the correct place or not. Does Windows somehow present itself differently to a program running out of "Program Files (x86)"? Is there a description that shows exactly what's different for a program installed in "Program Files (x86)" instead of "Program Files"? I think it's unlikely that Microsoft would introduce a new folder without a legitimate technical reason.

  Read the article

• What should I encrypt in Debian during install?

  - by ianfuture

  I have seen various guides and recommendations on web about how best to do this but nothing that clearly explains the best way and why. So I understand there is a need for part of Debian during install to be un-encrypted on its own partition to allow it to boot. Most info I have seen is call this /boot and set the boot flag. Next I believe the best approach is to create another partition out of all the rest of the disk space, encrypt this, then on top of that create a LVM and then within the LVM create my various partitions , name them , select size, and file system type. Can I include /swap in the encrypted LVM part ? Is this approach sound? If so what are the partitions I should use (this is going to be a minimal server install with a view to install as and when what I need for a dev server)? Finally how does the installer know what to put in each partition I define ? I appreciate there are more than one question but any help and suggestions would be appreciated. If further clarification is needed please mention in the comments . EDIT : 16/3/2010 After Richard Holloways reply I thought it relevant to add this info: The reasons why I want to do this are to explore maximising security on any server install and set up, due to interest in the area of Computer Security and Forensics. Also I am trying to peform the task as if it being performed in an enterprise situation. On a technical matter, once set up and configured with minimal packages and ssh this server will not physically be easy to access so I will only be entering via ssh. (Yes I know why encrypt something no one will ever be able to get their hands on? Because I can and I want to is the simple answer, but see above too).

  Read the article

• How can see what processes makes my server slow?

  - by Steven

  All my websites on my server are extremely slow or not loading at all. Even server admin (Plesk) will not load some times. There's been no changes to the sites for the last coupple of months. How can I see what processes is making my server slow? My environment looks like this: Server: VPS running Linux 2.8.x OS: Centos 5 Manage interface: Plesk 9.x Memmory: 1024MB CPU: 2.2GHz My websites run on PHP and MySQL. I finally managed to telnet (Putty + SSH) in to my server. Running top did not show any processes using more than max 2% CPU and none were using exesive memmory. I also got a friend to install a program that checks the core files, and all seemed fine. So I'm leaning towards network issues or some other server malfunction. But I'm not able to find out what can be wrong. Here are some answers to Sean Kimball: I don't run mail services on my server yet There are noe specific bandwidth peaks. Prefork looks like this <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> Not sure what you mean with DNS question. But I think it's up and running. There are no processes running wild Where can I find avarage load? Telnet is disabled and I have to log in using SSH :)

  Read the article

• How can I create a separate toolbar from the Task Bar?

  - by Iszi

  In Windows XP, you could separate toolbars from the Task Bar by dragging them to the desktop. They could then be left lying about anywhere on your screen or, my preferred option, docked to any side of the screen. I found this particularly useful to keep a handy list of common phone numbers quickly accessible. I'd create a new toolbar pointing to a custom folder, and put a bunch of dead shortcuts in the folder that had names and numbers as their file names. I'd then dock the toolbar to the left side, set it to auto-hide and always on top (options which could be set separate from the Task Bar as well) and it would be readily available no matter what else I was doing on my system. However, on my Windows 7 system, I seem unable to perform the crucial step of pulling the new toolbar off of the Task Bar. This is of course with the Task Bar "unlocked" so that I can move all my toolbars around. Is there something I'm missing here, or is this a feature that's been disabled in Windows 7? Is there any way to re-enable it, or otherwise achieve similar functionality? I'd rather be able to do this without additional software, if possible.

  Read the article

• Compare-Object gives false differences

  - by Andy

  I have some problem with Compare-Object. My task is to get difference between two directory snapshots made at different times. First snapshot is taken like this: ls -recurse d:\dir | export-clixml dir-20100129.xml Then, later, I get second snapshot and load both of them: $b = (import-clixml dir-20100130.xml) $a = (import-clixml dir-20100129.xml) Next, I'm trying to compare with Compare-Object, like that: diff $a $b What I get is in some places files that were added to $b since $a, but in some -- files that were in both snapshots, and some files, that were added to $b, are not given in Compare-Object output. Puzzling, but $b.count - $a.count is EXACTLY the same as (diff $a $b).count. Why is that? Ok, Compare-Object has -property param. I try to use that: diff -property fullname $a $b And I get the whole mess of differences: it shows me ALL the files. For example, say $a contains: A\1.txt A\2.txt A\3.txt And $b contains: X\2.mp3 X\3.mp3 X\4.mp3 A\1.txt A\2.txt A\3.txt diff output is something like that: X\2.mp3 => A\1.txt <= X\3.mp3 => A\2.txt <= X\4.mp3 => A\3.txt <= A\1.txt => A\2.txt => A\3.txt => Weird. I think I don't understand something crucial about Compare- Object usage, and manuals are scarce... Please, help me to get the DIFFERENCE between two directory snapshots. Thanks in advance UPDATE: I've saved data as plain strings like that: > import-clixml dir-20100129.xml | % { $_.fullname } | out-file -enc utf8 a.txt And results are the same. Here're excerpts of both snapshots (top 100-something lines, a.txt and b.txt), output of compare-object, and output of UNIX diff (unified). All files are UTF-8: http://dl.dropbox.com/u/2873752/compare-object-problem.zip

  Read the article

• torrent downloads not showing on Squid log

  - by noobroot

  hello, i have just a few months working as sysadmin, hence i still have lots to learn, first thing id like to do is as follows: We have an OpenBSD 4.5 box acting like firewall,dns,cache etc, the box has 2 network cards, one conected directly to the internet and the other to our switch, i used to work with sarg for the log analysis but then changed to the much faster free-sa. I use a daily free-sa report to check the bandwidth usage and report our top 5 bandwidth consumers (3 days a week being #1 and you will be buying the pizzas :D, we are a small company ~20 so we are very familiar). this was working really good until recently, one of us required to download some stuff via torrent (~3GB) and since the pizza rule is active for non-work related downloads, he told me (verified) that his download was indeed work related so i would dismiss that 3GB off his quota, but to my surprise the log didnt showed that 3GB, since his ip consumption was only around 290MB. More recently, since the FIFA world cup started, we know that some of the employees are watching the match's streaming, we know it and we dont care about it since, like already stated, we are a small company so we dont have restrictive policies, we all can chat, watch youtube, download anything we want BUT we are only allowed 300MB a day otherwise you'll get in the top5-pizza-board, anyway, that streaming consumption is also not showing in the free-sa reports. So my question is, why is these data being excluded from the reports? im thinking that the free-sa reports list only certain types of things but im also thinking if are the squid logs the ones that are not erm... logging these conections. Any help, guide, advice or clarification is appreciated.

  Read the article

• What may the reason of slowness be (see details in message body)?

  - by Ivan

  I've got a really weird situation I'm beating to solve. A performance problem which looks really like an empty waiting sequence set in code (while it probably isn't so). I've got a pretty powerful dedicated server (10 GB RAM, eight Xeon cores, etc) running Ubuntu 10.04 with all the functionality services (except OpenVPN server used to provide secure access to clients) deployed in separate VirtualBox (vboxheadless) machines (one for the company e-mail server, one for web server and one for accounting/crm server (Firebird + proprietary app server working with Delphi-made clients)). CPU load (as "top" says) is almost always near zero. Host system RAM is close to 100% usage but not overloaded (as very little swapping gets used, and freed (by stopping one of VMs) memory doesn't get reused any quickly). Approximately 50% of guests RAM is used. iostat usually shows near zero %util. Network bandwidth seems to be underused. But the accounting/crm client (a Win32 Delphi application run on WinXP machines) software works hell-slow with this server (and works much better using an inside-LAN Windows server). I just can't imagine what can make it be slow if there are so plenty of CPU, RAM, HDD and bandwidth resources available on clients and on the server even in their hardest moments. Saying bandwidth is underused I not only know that clients and the server are connected to the Internet with a bigger channels than really used (which leaves the a chance they may have a bottleneck of a sort on the route between them), I've tested bandwidth between clients and the server by copying files among them.

  Read the article

• Can nginx be an mail proxy for a backend server that does not accept cleartext logins?

  - by 84104

  Can Nginx be an mail proxy for a backend server that does not accept cleartext logins? Preferably I'd like to know what directive to include so that it will invoke STARTTLS/STLS, but communication via IMAPS or POP3S is sufficient. relevant(?) section of nginx.conf mail { auth_http localhost:80/mailproxy/auth.php; proxy on; ssl_prefer_server_ciphers on; ssl_protocols TLSv1 SSLv3; ssl_ciphers HIGH:!ADH:!MD5:@STRENGTH; ssl_session_cache shared:TLSSL:16m; ssl_session_timeout 10m; ssl_certificate /etc/ssl/private/hostname.crt; ssl_certificate_key /etc/ssl/private/hostname.key; imap_capabilities "IMAP4rev1" "UIDPLUS"; server { protocol imap; listen 143; starttls on; } server { protocol imap; listen 993; ssl on; } pop3_capabilities "TOP" "USER"; server { protocol pop3; listen 110; starttls on; pop3_auth plain; } server { protocol pop3; listen 995; ssl on; pop3_auth plain; } }

  Read the article

• Revamping an old and unstable office IT-solution using Windows Server and OpenVPN

  - by cmbrnt

  I've been given the cumbersome task to totally redo the IT-infrastructure for a customer's office. They are currently running Windows XP all over, with one computer acting as a file server with no control over which users have access to which files, and so on. To top it off, this file server also functions as a workstation, which means it gets rebooted every time the user notices some sluggish behavior or experiences problems with flash games. To say the least, this isn't working for them. Now - I've got a very slim budget, but I need to set up a new server, and I wish to run Windows Server 2008 on it. I also need the ability to access the network remotely via VPN. Would it be a good idea to install VMware ESXi 4.1 onto the new server, and then run Windows Server 2008 as well as a separate Debian install for openvpn on it? I don't like the Domain Controller for the future AD to also run a VPN-server, because of stability issues when something goes to hell with either of them. There will be no redundancy though. However, I'm not sure if there is something to gain by installing a VPN solution on the Windows Server itself, when it comes to accessing file shares on the network via VPN. I don't know how to enable users logging in via the VPN to access the remote files, since they will be accessing the network from their own home computers (which is indeed a really bad idea, but this is what I've got to work with). They won't be logged in to the windows Domain, but rather their home workgroups. I need to be able to grant access to files in certain directories based on the logged in AD-user, but every computer won't necessarily be configured to log into the domain. I'm not sure how to explain this in a good way, but I'd be happy to clarify if somethings not clear. Any help would be great, because I've got a feeling that I can't do this without introducing a bunch of costly new rules when it comes to their IT-solution. I'd rather leave that untouched and go on my merry way to the next assignment.

  Read the article

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• Error at the end of APC install

  - by cinqoTimo

  I need to get APC running for a Drupal install of mine. I found a fairly concise guide at http://blog.4rev.net/2009-09/installing-apc-accelerator-into-php5-fedora-core-11/ for installing on FC11, only, I am using FC12. I figured I would give it a shot. I was able to run the following commands successfully - and yum installed fc12 versions of everything in the FC11 guide. yum install php-pear yum install php-devel httpd-devel yum groupinstall ‘Development Tools’ yum groupinstall ‘Development Libraries’ Then, I tried pecl install apc. Everything looked good until to got to the end, where it outputted the following error. /var/tmp/APC/php_apc.c: In function ‘zif_apc_compile_file’: /var/tmp/APC/php_apc.c:881: warning: unused variable ‘eg_class_table’ /var/tmp/APC/php_apc.c:881: warning: unused variable ‘eg_function_table’ /var/tmp/APC/php_apc.c: At top level: /var/tmp/APC/php_apc.c:959: error: duplicate ‘static’ make: *** [php_apc.lo] Error 1 ERROR: `make' failed Some people have had success with installing apc-beta, but that didn't work for me.. Any suggestions? Is there something I missed that is critical in the FC12 version?

  Read the article

• Subdomain is preventing my search results from rising as expected in page rank

  - by culov

  My problem is that I have a site which has requires a dedicated page for every city I choose to support. Early on, I decided to use subdomains rather than a directly after my domain (ie i used la.truxmap.com rather than truxmap.com/la). I realize now that this was a major mistake because Google seems to treat la.truxmap.com as a completely different site as ny.truxmap.com. So for instance, if i search "la food truck map" my site will be near the top, however, if i search "nyc food truck map" im no where in sight because ny.truxmap.com wouldnt be very high in the page rank by itself, and it doesnt have the boost that it ought to be getting from the better known la.truxmap.com So a mistake I made a year ago is now haunting my page rank. I'd like to know what the most painless way of resolving my dilemma might be. I have received so much press at la.truxmap.com that I can't just kill the site, but could I re-direct all requests at la.truxmap.com to truxmap.com/la and do the same for all cities supported without trashing my current, satisfactory page rank results I'm getting from la.truxmap.com ?? EDIT I left out some critical information. I am using Google Apps to manage my domain (that is, to add the subdomains) and Google App Engine to host my site. Thus, Google Apps provides a simple mechanism to mask truxmap.appspot.com (the app engine domain) as la.truxmap.com, but I don't see how I can mask it as truxmap.com/la. If I can get this done, then I can just 301 redirect la.truxmap.com to truxmap.com/la as suggested below. Thanks so much!

  Read the article

• Uploads fail with shorewall enabled

  - by JamesArmes

  I have an Ubuntu 8.04 server with shorewall 4.0.6 installed. When I try to upload files using FTP, SCP, or cURL the file upload stalls almost immediatly and eventually times out. If I turn off shorewall then the uploads work fine. I don't have any rules that specifically allow FTP and I'm not too concerned with it, but I do need to be able to upload via 22 (SCP) and 80 & 443 (cURL). This is what my rules look like: COMMENT Allow Server to respond to any web (80) and SSL (443) requests ACCEPT net $FW tcp 80 ACCEPT $FW net tcp 80 ACCEPT net $FW tcp 443 ACCEPT $FW net tcp 443 COMMENT Allow Server to respond to SNMPD (161) requests ACCEPT net $FW udp 161 COMMENT Allow Server to respond to MySQL (3306) requests (for MySQL Graphing) ACCEPT net $FW tcp 3306 COMMENT Allow Server to respond to any SSH connection attempts, and to SSH out. SSH/ACCEPT net $FW SSH/ACCEPT $FW net COMMENT Allow Server to make DNS Requests out. DNS/ACCEPT $FW net COMMENT Default "close" anything else. Ping/REJECT net $FW ACCEPT $FW net icmp #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE I expected the top four ACCEPT lines to allow inbound and outbound traffic over 80 and 443 and I expected the two SSH/ACCEPT lines to allow inbound and outbound trffic over 22, including SCP. Any help is greatly appreciated. /etc/shorewall/policy contains the following (all lines above are commented out): # # Allow all connection requests from teh firewall to the internet # $FW net ACCEPT # # Policies for traffic originating from the Internet zone (net) # Drop (ignore) all connection requests from the Internet to the firewall # net all DROP info # THE FOLLOWING POLICY MUST BE LAST # Reject all other connection requests all all REJECT info #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE

  Read the article

• lamp -- edit PHP file but doesn't change web output -- including die()

  - by Reid W

  Server is standard Linux server on Amazon Web Services. Cent OS 5/Apache/PHP 5.3. No APC. It's worked fine for over a year, but now when I edit some but not all PHP files on the server using vi, the changes don't affect the web output. For example, I edit myfile.php and put a die() at the top, but when I load the page in my web browser, instead of the die() I see the content that would show up if the die() weren't there. svn updating the file in question doesn't help either. Files are on an Amazon EBS partition symlinked to /var/www/html. Just to reiterate -- this has worked fine for a long time. Restarting apache didn't help, nor did rebooting the server. What's weird is that it's just some of the files but not all. File ownership/permissions are the same for the "good" and "problem" files. I'm not a Linux newbie but am at a complete loss with this, and couldn't find anything on Google either. Any hints would be much appreciated!

  Read the article

• How can I make my Super keys (Windows Key) behave more like Ctrl/Alt/Shift in Linux

  - by deltaray

  After using the Ctrl + "arrow keys" for 13 years to switch virtual desktops in X windows, I've been convinced recently to change to using the Super keys instead (the windows key and the context menu key, which I've remapped). This all works fine for the most part. However, something is still picking up the key events that these keys are sending as if they are a normal alphanumeric like key. For example, I first noticed this in Google Docs spreadsheet that if I press the windows key alone over top of a cell, that it starts editing that cell. It doesn't insert anything, it just sends a key event that Firefox sees and starts editing the cell. This caused problems on a collaborative document I was working on as the way Google docs works, it led to me accidentally erasing the data in a few fields before I realised what was going on. I like using the super keys, but I want them to behave more like a Ctrl or Alt key does in that its a modifier key and doesn't send anything until a second key is pressed. My setup is the following: Ubuntu 10.10 XFCE 4 Microsoft Natural Ergo 4000 keyboard (with the logo scratched out) The following is my .Xmodmap file: remove Lock = Caps_Lock keycode 66 = Escape ! The below maps my other windows context menu key. keycode 135 = Super_R Edit: As requested, here is the relevant output from xev for a keypress and keyrelease of my Super_L (left windows key) KeyPress event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849342, (177,174), root:(182,228), state 0x10, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849430, (177,174), root:(182,228), state 0x50, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

  Read the article

• Windows Server 2008 R2 creating a multi-year client certificate using the IIS certsrv page while deploying SSTP VPN

  - by Warren P

  I am trying to follow instructions on Technet about deploying a Standard (non-enterprise) SSTP based VPN) that were originally written for Server 2008, but I am using Server 2008 R2, I have gotten as far as the part where it asks you to create a request a Server Authentication certificate. I have deployed IIS, and Active Directory Certificate Services, and chose "Standalone" and "Standard" (non-enterprise) Certificate Authority because I don't have an OID and don't think I should have to get one for a simple deployment of SSTP. The resulting certificates made by the Certification Authority "Issue" command, only have a 1 year period of validity, I want a multi-year certificate. At no point in this process is there any way to input this information unless it's through the Attributes text input area on the Advance Certificate Request page, which appears to be generated using an old ActiveX control, which means I can only do this using the workarounds in the article that I linked at the top, and only using Internet Explorer. Update:: It may be that this question is pointless since self-signed keys do not appear to work, when I try them, using Windows 8 as the VPN client. The problem is that the keys that are self-created by the technique shown here do not have any Certificate Revocation Server URLs and so you get an error "The revocation function was unable to check revocation", and the VPN connection fails.

  Read the article

• OpenLDAP 2.4.23 - Debian 6.0 - Import schema - Insufficient access (50)

  - by Yosifov

  Good day to everybody. I'm trying to add a new schema inside OpenLDAP. But getting an error: ldap_add: Insufficient access (50) root@ldap:/# ldapadd -c -x -D cn=admin,dc=domain,dc=com -W -f /tmp/test.d/cn\=config/cn\=schema/cn\=\{5\}microsoft.ldif root@ldap:/# cat /tmp/test.d/cn\=config/cn\=schema/cn\=\{5\}microsoft.ldif dn: cn=microsoft,cn=schema,cn=config objectClass: olcSchemaConfig cn: microsoft olcAttributeTypes: {0}( 1.2.840.113556.1.4.302 NAME 'sAMAccountType' DESC 'Fss ssully qualified name of distinguished Java class or interface' SYNTAX 1.3.6. 1.4.1.1466.115.121.1.27 SINGLE-VALUE ) olcAttributeTypes: {1}( 1.2.840.113556.1.4.146 NAME 'objectSid' DESC 'Fssssull y qualified name of distinguished Java class or interfaced' SYNTAX 1.3.6.1.4. 1.1466.115.121.1.40 SINGLE-VALUE ) olcAttributeTypes: {2}( 1.2.840.113556.1.4.221 NAME 'sAMAccountName' DESC 'Fds sssully qualified name of distinguished Java class or interfaced' SYNTAX 1.3. 6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) olcAttributeTypes: {3}( 1.2.840.113556.1.4.1412 NAME 'primaryGroupToken' SYNTA X 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) olcAttributeTypes: {4}( 1.2.840.113556.1.2.102 NAME 'memberOf' SYNTAX 1.3.6.1. 4.1.1466.115.121.1.12 SINGLE-VALUE ) olcAttributeTypes: {5}( 1.2.840.113556.1.4.98 NAME 'primaryGroupID' SYNTAX 1.3 .6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) olcObjectClasses: {0}( 1.2.840.113556.1.5.6 NAME 'securityPrincipal' DESC 'Cso ntainer for a Java object' SUP top AUXILIARY MUST ( objectSid $ sAMAccountNam e ) MAY ( primaryGroupToken $ memberOf $ primaryGroupID ) ) I also tried to add the schema by phpldapadmin, but gain the same error. I'm using the admin user which is specified by default from the begging of the slpad installation. How may I add permissions to this user ? Best wishes

  Read the article

• linux: per-process monitor, every 10 minutes, with history access

  - by Inbar Rose

  I really didn't know a better way to ask my question, hence you get a horribly named question. I will explain what i want to do, maybe that will help you help me. I would like to have my linux machine continuously monitor (every 10 minutes) all the processes on my machine. The information from each process that I require is the name, CPU usage, allocated (virtual) memory, and resident (ram) memory. If these periodic reports were to be looked at, they would look something like this: PROCESS CPU RAM VIRTUAL name1 % MB MB name2 % MB MB ...etc..etc These reports should be stored in such a way that I can access them at a later date by giving a date/time scope (range). For instance, if I want to see the history of my processes from 12:00:00 1.12.12 till 12:00:00 2.12.12 I can - and it should give me the history of the processes for every 10 minutes between those date/time borders. The format of the return is not important, that will be handled by a script anyway and can be modified into anything I need. I have looked into a few things so far, but have not found something that clearly meets my needs. Among the things i searched: sar, free(1), top(1).. and a few other things. It should be a simple issue, i can already see all this information by simply looking at my htop, but i need only a tool that will gather the desired fields for me for each processes every 10 minutes, and then also let me extract slices of that data based on date/time scopes (ranges). note: I have limited experience with linux, so please give detailed information. note2: The desired output will be something like this (after receiving the desired range) CPU USAGE BY PROCESS: proc_nameA 1,2,2,2,2,2...... numbers represent % usage every 10 minutes... proc_nameB 4,3,3,6,1,2...... The same idea with the other information.

  Read the article

• Windows 7: Dual Monitor Issue

  - by sdoca

  I have a Dell laptop with a docking station and two external monitors hooked up. I'm running Windows 7 64 bit. Originally, the two monitors were the same - Dell 1908FP. I have replaced one of them with an HP LA2405. I have set the HP 24" (1920 x 1200 connected via DVI port) as montior 1 and extended to use the Dell 19" (12080 x 1024 connected via VGA port) as monitor 2. I have set my power plan so that when the laptop is plugged in, it will turn the monitors off after 10 minutes, but it will not put my laptop to sleep. However, now that I have the HP monitor, when I unlock my laptop and the monitors come back on, all my windows are resized and shifted to the top left corner of the HP monitor as if they had been resized for display on the smaller Dell monitor. A co-worker has the exact same laptop and monitor configuration but doesn't experience this issue, so I figure there's some configuration that's different but we can't find it. I haven't been able to find any mention of a similar problem doing an internet search, but I'm not really sure what terms to use in my search. Anybody have any suggestions as to what may be causing the issue? OS setting? Monitor setting? EDIT: My laptop is using the Intel Graphics and Media Control Panel/drivers.

  Read the article

• All computers on network get stuck waiting for some sites indefinetely

  - by zacaj

  This happens across three computers, running windows 7 and Ubuntu, firefox, opera, and chrome (all latest versions). I am connected to the internet through a Verizon wireless usb modem. When I try to open some web pages they will never finish loading (and usually never even show anything). The status bar at the bottom of the browser will display "Waiting for X" The servers it gets stuck on include: platform.twitter.com s7.addthis.com connect.facebook.net ajax.googleapis.com 2mdn.net Ive been getting away with just blocking them in AdBlock up until now, however the last two have been causing problems. There are some sites which require googleapis.com to load correctly, and some that wont ever load unless its blocked. eBay requires access to 2mdn.net to load pictures. On top of this its getting really annoying having to update AdBlock across all these computers whenever a new site pops up. I'm hoping there's some easier way to fix this? The different sites causing the freeze indicate to me that it's either a problem on my end (somehow?) or some server side software that got updated with a new bug?

  Read the article

• Optimize Apache performance

  - by Phliplip

  I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

  Read the article

• Replicated filesystem and EC2 MySQL

  - by El Yobo

  I'm currently investigating migrating our infrastructure over to run on Amazon's EC2 and am trying to figure out the best way to set up a MySQL service. I'm leaning towards running our own MySQL instances, rather than going with Amazon's RDS, but am still considering the best approach for performance and cost on the instance itself. In order to have persistent data, the MySQL data needs to be on an EBS volume (with some form of striped RAID, e.g. RAID0 or RAID10) to improve persistence. However, EBS IO is limited by the network interface (gigabit, so a theoretical maximum of 128 MB/s), while the ephemeral volumes have no such problem. I did see a suggestion for running two MySQL servers on an instance, with a master running on the ephemeral disk (which we would also RAID) and a slave storing changes to an EBS volume, but this has some additional overhead and complexity (two servers). What I was imagining is using some form of replicated file system such that I could have a filesystem on top of a RAID0 of ephemeral volumes to maximise performance all changes from the above immediately replicated to another RAID1 volume backed by multiple EBS volumes to ensure no data loss The advantages of this would be best possible IO performance for the DB server; no network delay in IO decreased IO on EBS volumes (as all read IO will be done on the ephemeral volumes) so decreased cost good data security, as it's backed onto redundant EBS volumes However, I haven't seen an appropriate system to replicate all changes from one volume to the other; is there a filesystem, or any other approach, which will do this? The distributed file systems, e.g. GlusterFS, DRBD etc seem to focus on replicating disks between servers, can they be set up to do what I'm interested in here? I also haven't seen anything about other's taking this approach. Do I have a solution in need of a problem here (i.e. is performance good enough, so this whole idea is redundant)? Is there some flaw in the plan?

  Read the article

• Secure NAT setup with iptables

  - by TheBigB

  I have Debian running device that needs to act as an internet-gateway. On top of that I want to provide a firewall that not only blocks inbound traffic, but also outbound traffic. And I figured iptables should be able to do the job. The problem: I've configured NAT properly (I think?), but once I set the default policy to DROP and add rules to for instance allow HTTP traffic from inside the LAN, HTTP is not going through. So basically my rules don't seem to work. Below is the initialization script that I use for iptables. The device has two NICs, respectively eth0 (the WAN interface) and eth1 (the LAN interface). echo 1 > /proc/sys/net/ipv4/ip_forward # Flush tables iptables -F iptables -t nat -F # Set policies iptables -P INPUT DROP iptables -P OUTPUT DROP # NAT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT # Allow outbound HTTP from LAN? iptables -A FORWARD -i eth1 -o eth0 -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --dport 80 -j ACCEPT Can anyone shed some light on this?

  Read the article

• visually documenting web server configuration and infrastructure

  - by Alex Ciarlillo

  I have just finished a large re-organization and update of our institutions web server(s). This server hosts 3 virtual hosts, 3-4 blogs, 2 wikis, some legacy static HTML pages, and many hosted documents (PDF, .jpg, .xls). I have organized the site into a structure of something like: /var/www/sites/vhost1, vhost2, vhost3 .../wordpress/blogX .../mediawiki/wikiX Data is in a seperate directory structure so I can run a cron task over it to make sure it is all writeable and such. I then symlink to these data directories for each application. /var/www/data/vhost1, vhost2, vhost3 .../wordpress/blogX/uploads .../mediawiki/wikiX/images All Apache configs are in /etc/httpd/conf.d/vhosts.d/vhost1,2,3.conf On top of this there is also a testing server which mirrors this setup. Once changes are fully tested, they are rsynced down to the live server. All the wordpress installs and mediawiki installs are straight form SVN and updates are done by switching branches or "svn up". So my question is how can I best document to share with a) co-workers, b) possible future replacement, c) myself 6 months from now. Obviously I can make a wiki page, excel document, whatever and fill it with text, but I am looking for a more visual representation that I can use to explain the architecture to less-technical people. Ideally it would be awesome if this visual representation could then be expanded to get more technical details.

  Read the article

• How to troubleshoot this memory usage?

  - by Camran

  I have a classifieds website. I use PHP, MySql, and SOLR. Solr uses a Servlet Container, in my case JETTY, which is java application. I just noticed that something was terribly wrong on my website. I opened the terminal and entered the "top" command and noticed that JAVA was EATING all the cpu and mem. Now I thought "Ok, maybe I need more mem and cpu" So I increased it. But along with the increase the java app started eating more. This has never happened before, and it is either a bug, or a hack of some kind. Anyways, I need to troubleshoot this now, and so I wonder how do I do this? Can I somehow pinpoint exactly when the memory usage started to go up from some error log? How does one troubleshoot this? How do I prevent it? Is it possible to prevent too many requests somehow, if they are within a timeline? Thanks

  Read the article

< Previous Page | 522 523 524 525 526 527 528 529 530 531 532 533  | Next Page >