Search Results

Search found 17267 results on 691 pages for 'dynamic ip'.

Page 527/691 | < Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >

• ESX Firewall Command Troubles

  - by John

  Hi, I am working on creating some firewall rules to stop some of the SSH brute-force attacks that we have seen recently on our ESX server hosts. I have tried the following rules from the CLI to first block all SSH traffic and then allow the two ranges that I am interested in: esxcfg-firewall --ipruleAdd 0.0.0.0/0,22,tcp,REJECT,"Block_SSH" esxcfg-firewall --ipruleAdd 11.130.0.0/16,22,tcp,ACCEPT,"Allow_PUBLIC_SSH" esxcfg-firewall --ipruleAdd 10.130.0.0/16,22,tcp,ACCEPT,"Allow_PRIVATE_SSH" However, these rules are not working as intended. I know that if you do not enter the block rule first, then the allow rule will not be processed. We are now having the issue where the first entered allow rule is being ignored such that the block rule works and the last entered allow rule works. I was curious if anyone had any ideas on how I could allow a few different ranges of IP's with the esxcfg-firewall --ipruleAdd command? I am at a loss and am having a hard time locating examples or further documentation about this. Thanks in advance for your help with this.

  Read the article

• All email directed to 3rd party vendor except for one specific domain. How?

  - by jherlitz

  So we setup a site to site vpn tunnel with another company. We then proceeded to setup a DNS zone on each others dns servers and entered in each others Mail server name and IP, MX record and WWW record. This allowed us to send emails to each others mail servers through the site to site vpn. Now recently the other company started using MX Logic to scan all outbound and incoming mail. So all outbound email is directed to MX Logic. However we still want email between us to travel across the the Site to Site VPN tunnel. How can we specify that to happen for just one domain not to be directed to MX Logic? Stump on both ends and looking for help.

  Read the article

• Can't set session.http_only for php under Plesk 11

  - by TheFoOL

  I want to enable session.cookie_httponly for my domain. I added these lines for my domain (in additional configuration directives): session.cookie_httponly = On error_log = error.log Error log works fine (a file is created) whereas session.cookie_httponly doesn't (according to phpinfo()). But why not? I use Plesk 11 on Ubuntu Server 12.04. PHP as FastCGI. PHP 5.3.10-1ubuntu3.4. Safe mode is off. Domain is associated to a dedicated IP address. Website powered by Joomla 2.5.7.

  Read the article

• Cannot Ping PS3 Using a Wired Connection

  - by Post

  PS3 is using the inbuilt wireless network adapter (I cannot change this) When I try to ping the PS3 from ANY computer which is on a wired ethernet connection, I get Request Timed Out errors. Whenever I ping from a computer with a wireless connection, it works just fine. To be clear: Pinging from Wireless PC to Wireless PS3 works Pinging from Wired PC to Wireless PS3 fails I have tried this on several PC's and Laptops all with the same results. As an attempted solution I have set up static IP's on all related devices. More information: Default Gateway = 192.168.2.1 PS3(wireless) = 192.168.2.100 PC(wired) = 192.168.2.99 Subnet Mask(for both devices, I have made sure) = 255.255.255.0 Thanks

  Read the article

• Set up router to vpn into proxy server

  - by NKimber

  I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives?

  Read the article

• Filtering downloading a file

  - by Ozgun Sunal

  people. i know there are several types of firewalls operating at different layers of OSI. ACLs(layer 3 firewalls filter based on port numbers and IP addresses), SPI(which examines the patterns of data at layer 3 and realise that data content is malicious or not) and application layer firewalls which is capable of understanding the data at that level. Considering this, i'll give an example and learn what i need to do. Lets say, we have a computer has access to the Internet. i want to download a file or display a web page from a website but block access to the another website/s or downloading. To do this, i cant block access to the web browser on the 3rd party firewall bcos that will shut down all access. ACLs wont already do it. So, which kind of firewall will make it possible to filter specific traffic and how?

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• how to protect php app (vbulletin) from hackers

  - by samsmith

  Our vBulletin system is under constant attack, raising cpu load and making the system very slow for legit users. The attack is a script type attack that is attempting to log in and/or create new login ids (mostly it is trying to create login ids in order to spam the site). In vBulletin, we have black listed large ranges of ips, which has helped a lot, but the attacks continue. Is there an automated way to protect the application or web server? ideally, the protection would detect the pages accessed and automatically black list the ip.

  Read the article

• Will this SPF record restrict delivery of email for the original domain?

  - by user199421

  As part of the product we offer we send emails on behalf of our clients. Because the emails don't come from an IP associated with the client they are sometimes flagged as spam. We advised some of our clients to add an SPF record approving us to send emails on their behalf. We saw immediate improvement in deliverability rates after making the change however one of our clients was notified by his hosting provider that the SPF record we suggested to add would "slightly restrict" all emails that don't come from our servers (including our client's own servers). The record we use is this: v=spf1 a mx include:ourdomain.com ~all So my question is if the warning we received about this is correct and if so why and what can be done to solve this (allow sending email both from original domain and by ourselves).

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• Set up new dedicated server

  - by aldo

  I'm a newbie. I just bought a new dedicated server which running windows server 2008 r2 and have an ip for example 128.98.34.112. I bought a domain xyz.com without hosting from godaddy.com and i want to host it to my new server. in godaddy.com i already follow this steps http://www.webhostingtalk.com/showthread.php?t=237604. i also have installed plesk in my new server and create a domain with the name xyz.com and set the A record for xyz.com to 128.98.34.112, and set the NS record to ns1.xyz.com and ns2.xyz.com. But until now i still can not open the xyz.com from browser. Whats wrong? Do I need to install active directory to host a domain? thanks

  Read the article

• iptables to allow input and output traffic to and from web server only

  - by Caedmon

  I have an Elastic Search server which seems to have been exploited (it's being used for a DDoS attack having had NO firewall for about a month). As a temporary measure while I create a new one I was hoping to block all traffic to and from the server which wasn't coming from or going to our web server. Will these iptables rules achieve this: iptables -I INPUT \! --src 1.2.3.4 -m tcp -p tcp --dport 9200 -j DROP iptables -P FORWARD \! --src 1.2.3.4 DROP iptables -P OUTPUT \! --src 1.2.3.4 DROP The first rule is tried and tested but obviously wasn't preventing traffic coming from my server to other IP addresses so I was hoping I could add the second two rules to full secure it.

  Read the article

• Setting up VPS hosting

  - by RobinFTW

  I'm trying to set up my own vps hosting. It wont be a paid service, just an experiment for me and some nerdy friends. What I'd like to be able to do is this: Run multiple virtual servers on 1 external IP. These servers can run anything from Minecraft servers to simple http servers. They will also need to be accessible thru SSH. What I don't get is how I can address these servers using domain names. I've done some research and found out that I could use Vhosts with Apache. However this only applies to http servers. It was also suggested I'd use a reverse proxy(squid) but this also only applies to http requests. I could just use different ports for different servers, but thats not ideal and not what I want. Can someone suggest a setup? Maybe some tutorials or anything.

  Read the article

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• What is the difference between "could not find host" and "timed out" when pinging fails?

  - by Gutsygibbon

  As the title states. I was trying to ping a bunch of servers whose existence I am not sure of. There are 10 servers in all. Two of them got ping timed out while the other eight have could not find host. The 2 timed out ones show an IP which times out too on pinging. I did a quick nslookup on these servers and they did not have any DNS entries. What is the difference between "could not find host" and "timed out" when pinging fails?

  Read the article

• Hosing website on own server. What is Hardware requirement and Cost [closed]

  - by KuKu

  As i am about to finish my dream website, i need to host it on some server. I checked Amazon AWS Free Tier, i found it pretty complex. As i made full website in java(JSP + Servlet + mysql + Node.js), its been expensive to host. So i thought that why not to host on own server so that i will be fully dependent on my resources, not on any one else. And i know, in future i need to pay more and more to the other hosting company(because of uploading images and number of incoming users). So my question is, On initial stage what kind of hardware i will required. What can be the cost of that hardware? I already have 12MBPS broadband connection, will it be sufficient? It has static IP Address as well.

  Read the article

• Access Windows VPN DNS from Ubuntu

  - by user46427

  I am using Ubuntu 10.04 to access a Windows VPN. I connect to the VPN from Ubuntu, and when I open a Windows 7 virtual machine (VirtualBox), everything works great ... I can access local network drives, ping local servers, remote into local machines, etc. However, I can do none of this from Ubuntu. With the VPN connected, I cannot even ping anything within the VPN local network. I'm guessing it's a DNS issue that Windows is handling automatically but Ubuntu needs a setting somewhere to tell it to use the DNS servers of the VPN network? Any ideas? I'm a relative novice to Ubuntu, esp. VPN in Ubuntu. [EDIT] Actually, I'm almost positive it is DNS, because if I get the IP address from the Windows VM I can use Terminal Server Client to remote into a machine.

  Read the article

• How to get a subdomain to point a different server than the main domain

  - by alexchoi

  I have a site at say: foo.com and I would like the subdomain blog.foo.com to point to fooblog.com blog.foo.com - fooblog.com However, our DNS provider says that if we do an alias such as that, since the provider at fooblog.com does not recognize the name blog.foo.com. We asked if we could just point blog.foo.com at the IP address of fooblog.com and they say the same problem will occur. Any advice? Due to our configuration we can't really put the blog on foo.com. We are willing to move our hosting and even our domain name hosting if necessary. -- Yes, I am a n00b when it comes to DNS.

  Read the article

• Device that connects to a switch via RJ45, that emulates a PC

  - by Mike Christiansen

  One of my co-workers once saw a device that plugged into a RJ45 jack, that emulated a PC. It could be configured with an IP address, and respond to pings. I was wondering if anyone knew about these, or even what they are called? This will be used to simulate a PC in a classroom environment. Thanks in advance. Edit: This is a CCNA classroom, we are looking to simulate a PC connected to an ethernet port on a router. These will be on different subnets, etc. This might be doable with a VM through VLANs and virtual switches, but then we are getting away from configuring the physical ports on the router the way we want to.

  Read the article

• pfSense router gives DNS rebinding warning when accessing subdomains

  - by Richard Maddis

  I have just set up a router running pfSense on our network and forwarded the appropriate ports. I have a small web server running in my network, and a domain name pointing to our (WAN) IP. When accessing that domain name, everything works fine. However, when accessing a subdomain of the domain name, pfSense will give a DNS rebinding warning. This did not happen back when I used a DD-WRT router. What is the proper way to fix this? The DNS records for the subdomain also point to the same address (I use a virtual server to differentiate the subdomains.)

  Read the article

• Print Managment

  - by nardone25

  Hello everyone, I am having a ID10T error LOL,. First I am using window server 2003 r2 edition. I installed on a domian controller print managment. So this is where all 48 printers I have are installed. I just got a new printer. I gave it an IP for the machine and when I head into the server room i tried to add it to the server. I can print a test page, when I am logged on to the print server, but on my client computer when he goes to add a printer in window xp pro the printer isn't listed in add print for network. What did I do wrong?

  Read the article

• Connecting client to JBoss cluster

  - by Nivek

  I am new to JBoss. Basically I have managed to cluster 2 nodes with: Node 1: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.51.28 -Djboss.messaging.ServerPeerID=1 Node 2: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.50.21 -Djboss.messaging.ServerPeerID=2 I know that if i cofigure a Apache load balancing(Mod_JK) to sit infront of the cluster, the client simply just punch in the IP of the Apache, and Apache will redirect the traffic to the nodes. But I do not want to have a Apache infront of the cluster. So how do my client access the cluster?? Do i need to configure something in JBoss, or isit a MUST to have a load balancer for the client to access the cluster?? MANY thanks in advance....

  Read the article

• VPS name server

  - by rockey

  I bought a new VPS, and configured two applications test1.com and test2.com on ngix server, now I can access both the application inside VPS, Now I need to invoke the application from other machines. MY domain is registerd with Enom, So I added 'A' name pointed to IP address of the VPS, Currently my VPS is not providing any Name Server, So what steps need to be done to resolve the issue regarding Name Server so that i can externally invoke the domains like www.test.com and www.test2.com from other machines? Is any configuration is left from my side other than configuring the Name Server? because it is not working now Thanks in advance

  Read the article

< Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >