Search Results

Search found 46039 results on 1842 pages for 'system diagnostics proces'.

Page 527/1842 | < Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >

• USR9108 not connecting to DSL service/not detecting carrier

  - by Salman A

  As suggested in this answer I've hooked up the phone cable to the USR9108 router. I've entered the information provided by the ISP (VPI/VCI, Username, Password etc) in the ADSL configuration section but the router does not connect to DSL service. The ASDL diagnostics fail in the first step stating that no signal was found. The same phone line when connected to ZyXEL P-660R-T1 v2 modem works successfully. Can anyone tell me how to trouble shoot this issue? Does it have something to do with 2 wire and 4 wire telephone line? PS: whats the difference between ASDL and DSL?

  Read the article

• KVM guest io is much slower than host io: is that normal?

  - by Evolver

  I have a Qemu-KVM host system setup on CentOS 6.3. Four 1TB SATA HDDs working in Software RAID10. Guest CentOS 6.3 is installed on separate LVM. People say that they see guest performance almost equal to host performance, but I don't see that. My i/o tests are showing 30-70% slower performance on guest than on host system. I tried to change scheduler (set elevator=deadline on host and elevator=noop on guest), set blkio.weight to 1000 in cgroup, change io to virtio... But none of these changes gave me any significant results. This is a guest .xml config part: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/vgkvmnode/lv2'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> There are my tests: Host system: iozone test # iozone -a -i0 -i1 -i2 -s8G -r64k random random KB reclen write rewrite read reread read write 8388608 64 189930 197436 266786 267254 28644 66642 dd read test: one process and then four simultaneous processes # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct 1073741824 bytes (1.1 GB) copied, 4.23044 s, 254 MB/s # dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/vgkvmnode/lv2 of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 14.4528 s, 74.3 MB/s 1073741824 bytes (1.1 GB) copied, 14.562 s, 73.7 MB/s 1073741824 bytes (1.1 GB) copied, 14.6341 s, 73.4 MB/s 1073741824 bytes (1.1 GB) copied, 14.7006 s, 73.0 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 6.2039 s, 173 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 32.7173 s, 32.8 MB/s 1073741824 bytes (1.1 GB) copied, 32.8868 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9097 s, 32.6 MB/s 1073741824 bytes (1.1 GB) copied, 32.9688 s, 32.6 MB/s Guest system: iozone test # iozone -a -i0 -i1 -i2 -s512M -r64k random random KB reclen write rewrite read reread read write 524288 64 93374 154596 141193 149865 21394 46264 dd read test: one process and then four simultaneous processes # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 1073741824 bytes (1.1 GB) copied, 5.04356 s, 213 MB/s # dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=1024 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=2048 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=3072 & dd if=/dev/mapper/VolGroup-lv_home of=/dev/null bs=1M count=1024 iflag=direct skip=4096 1073741824 bytes (1.1 GB) copied, 24.7348 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7378 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.7408 s, 43.4 MB/s 1073741824 bytes (1.1 GB) copied, 24.744 s, 43.4 MB/s dd write test: one process and then four simultaneous processes # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 10.415 s, 103 MB/s # dd if=/dev/zero of=test bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test2 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test3 bs=1M count=1024 oflag=direct & dd if=/dev/zero of=test4 bs=1M count=1024 oflag=direct 1073741824 bytes (1.1 GB) copied, 49.8874 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8608 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.8693 s, 21.5 MB/s 1073741824 bytes (1.1 GB) copied, 49.9427 s, 21.5 MB/s I wonder is that normal situation or did I missed something?

  Read the article

• Missing "log on to" field in Windows 2008 password change dialog

  - by Dmitri Chubarov

  I have to setup an embedded standalone CIFS server outside of domain environment. I shall refer to the server as storage_gateway. The default password setting for the Administrator account is Password must be changed. Until Administrator password is changed other local accounts are disabled. While the server is on default password connecting to a share causes fails with NT_STATUS_PASSWORD_MUST_CHANGE error. $ smbclient -L //storage_gateway -U Administrator session setup failed: NT_STATUS_PASSWORD_MUST_CHANGE I have a mixed Linux/Windows environment and prefer smbclient for diagnostics. To change the password in Windows 2003 Server I could press CTRL-ALT-DEL to get into the Windows Security window and change password for the remote server specifying the server name or ip address (xx.xx.xx.xx) in the system password change dialog. (the name root is just an example, I have edited the dialogs to translate them) However in Windows 2008 the corresponding dialog lacks the Log on to field. Is there a way to change a remote password in Windows 2008 Server/Windows 7?

  Read the article

• Where's the Swap File/Partition?

  - by chrisbunney

  I'm investigating the virtual memory configuration of a Debian based Amazon EC2 instance, and as my background isn't in system admin, I'm slightly confused by what I'm seeing. We're using MongoDB, and the monitoring server we have indicates that the Mongo process is using about 20GB of swap space, however I can't figure out where this is located on the server. As far as I can tell from using the various suggested methods from Google, there is either a much smaller amount, or none at all. top indicates that there is 1.8GB of swap memory: top - 15:35:21 up 6 days, 3:23, 1 user, load average: 1.60, 1.43, 1.37 Tasks: 47 total, 2 running, 45 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 1.3%sy, 0.0%ni, 14.7%id, 83.8%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 3928924k total, 2855572k used, 1073352k free, 640564k buffers Swap: 0k total, 0k used, 0k free, 1887788k cached swapon -s doesn't seem to think there's any swap space: Filename Type Size Used Priority free -m doesn't think there's any swap either: total used free shared buffers cached Mem: 3836 3663 172 0 626 2701 -/+ buffers/cache: 336 3500 Swap: 0 0 0 And neither does vmstat: procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 3 0 66224 641372 2874744 0 0 21 5012 21 33 2 2 76 19 But cat /etc/fstab thinks there is a swap partition: /dev/xvda1 / ext3 defaults 1 1 /dev/xvda2 /mnt ext3 defaults 0 0 /dev/xvda3 swap swap defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 However df -k gives no indication of the xvda3 partition: Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 16513960 15675324 0 100% / tmpfs 1964460 8 1964452 1% /lib/init/rw udev 1914148 28 1914120 1% /dev tmpfs 1964460 4 1964456 1% /dev/shm So I really don't know what to make of this, because I appear to have a process using about 10 times more virtual memory than what might be available, and I have no idea where this virtual memory is on the system. I'm probably misinterpreting the output of the tools, so I'd be grateful if someone would be able to set me straight: What have I got wrong, what's the right interpretation, and how do you reach that interpretation? EDIT0: We use 10gen's MMS for monitoring the database, the relevant section for memory from the last data point is: "mem": { "virtual": 20749, "bits": 64, "supported": true, "mappedWithJournal": 20376, "mapped": 10188, "resident": 1219 }, This JSON is specific to the database process (I believe) rather than the system as a whole. fdisk -l /dev/xvda outputs... nothing? I tried each of the 3 xvda entries in /etc/fstab as well: root@ip:~# fdisk -l /dev/xvda1 Disk /dev/xvda1: 34.4 GB, 34359738368 bytes 255 heads, 63 sectors/track, 4177 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table root@ip:~# fdisk -l /dev/xvda2 root@ip:~# fdisk -l /dev/xvda3 root@ip:~# Edit1: Output of cat /proc/meminfo for the sake of completeness: MemTotal: 3928924 kB MemFree: 726600 kB Buffers: 648368 kB Cached: 2216556 kB SwapCached: 0 kB Active: 1945100 kB Inactive: 994016 kB Active(anon): 60476 kB Inactive(anon): 12952 kB Active(file): 1884624 kB Inactive(file): 981064 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 387180 kB Writeback: 0 kB AnonPages: 73380 kB Mapped: 1188260 kB Shmem: 48 kB Slab: 149768 kB SReclaimable: 146076 kB SUnreclaim: 3692 kB KernelStack: 1104 kB PageTables: 16096 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1964460 kB Committed_AS: 305572 kB VmallocTotal: 34359738367 kB VmallocUsed: 16760 kB VmallocChunk: 34359721448 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 3932160 kB DirectMap2M: 0 kB

  Read the article

• Exchange 2003-Exchange 2010 post migration GAL/OAB problem

  - by user68726

  I am very new to Exchange so forgive my newbie-ness. I've exhausted Google trying to find a way to solve my problem so I'm hoping some of you gurus can shed some light on my next steps. Please forgive my bungling around through this. The problem I cannot download/update the Global Address List (GAL) and Offline Address Book (OAB) on my Outlook 2010 clients. I get: Task 'emailaddress' reported error (0x8004010F) : 'The operation failed. An object cannot be found.' ---- error. I'm using cached exchange mode, which if I turn off Outlook hangs completely from the moment I start it up. (Note I've replaced my actual email address with 'emailaddress') Background information I migrated mailboxes, public store, etc. from a Small Business Server 2003 with Exchange 2003 box to a Server 2008 R2 with Exchange 2010 based primarily on an experts exchange how to article. The exchange server is up and running as an internet facing exchange server with all of the roles necessary to send and receive mail and in that capacity is working fine. I "thought" I had successfully migrated everything from the SBS03 box, and due to huge amounts of errors in everything from AD to the Exchange install itself I removed the reference to the SBS03 server in adsiedit. I've still got access to the old SBS03 box, but as I said the number of errors in everything is preventing even the uninstall of Exchange (or the starting of the Exchange Information Store service), so I'm quite content to leave that box completely out of the picture while trying to solve my problem. After research I discovered this is most likely because I failed to run the “update-globaladdresslist” (or get / update) command from the Exchange shell before I removed the Exchange 2003 server from adsiedit (and the network). If I run the command now it gives me: WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Offline Address Book - first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Schedule+ Free Busy Information – first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameArchive" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameContacts" is invalid and couldn't be updated. (Note that I’ve replaced my domain with “domainname.com” and my organization name with “containername”) What I’ve tried I don’t want to use the old OAB, or GAL, I don’t care about either, our GAL and distribution lists needed to be organized anyway, so at this point I really just want to get rid of the old reference to the “first administrative group” and move on. I’ve tried to create a new GAL and tell Exchange 2010 to use that GAL instead of the old GAL, but I'm obviously missing some of the commands or something dumb I need to do to start over with a blank slate/GAL/OAB. I'm very tempted to completely delete the entire "first administrative group" tree from adsiedit and see if that gets rid of the ridiculous reference that no longer exists but I dont want to break something else. Commands run to try to create a new GAL and tell exch10 to use that GAL: New-globaladdresslist –name NAMEOFNEWGAL Set-globaladdresslist GUID –name NAMEOFNEWGAL This did nothing for me except now when I run get-globaladdresslist or with the | FL pipe I see two GALs listed, the “default global address list” and the “NAMEOFNEWGAL” that I created. After a little more research this morning it looks like you can't change/delete/remove the default address list, and the only way to do what I'm trying to do would be to maybe remove the default address list via adsiedit and recreate with a command something like new-GlobalAddressList -Name "Default Global Address List" -IncludedRecipients AllRecipients. This would be acceptable but I've searched and searched and can't find instructions or a breakdown of where exactly the default GAL lives in AD, and if I'd have to remove multiple child references/records. ** Of interest** I'm getting an event ID 9337 in my application log OALGen did not find any recipients in address list ‘\Global Address List. This offline address list will not be generated. -\NAMEOFMYOAB --------- on my Exchange 2010 box, which pretty much to me seems to confirm my suspicion that the empty GAL/OAB is what's causing the Outlook client 0x8004010F error. Help please!

  Read the article

• Windows server 2008 rejecting packets from client

  - by l46kok

  We deployed a server application in .NET 4.0 that is going to run on Windows Server 2008 R2. Strangely, the clients cannot connect to the server given an external IP and the server port. I've ran wireshark diagnostics on the server computer and verified that the packets are arriving to the NIC without any issue so it seems Windows Server 2008 is the culprit here. I've tried to temporarily disable the firewall and add the server port into inbound/outbound rule but it still doesn't solve the issue. How can I solve this issue?

  Read the article

• No device file for partition on logical volume (Linux LVM)

  - by Brian

  I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

  Read the article

• fedora 11 server won't boot from SATA disk, won't boot from CD, BIOS configuration problems

  - by Tom

  Hi all, Yesterday our fc11 file/print server didn't boot, and had stopped on the BIOS page with a configuration problem. (with a distinct lack of foresight) I reset the BIOS settings to default without recording the message and booted the server. The server ran until it was to be booted this morning, and it was failing to mount the root partition from the SATA disk. It also failed to boot from a known good diagnostics CD. After a few more tries, it now fails part way through the Phoenix - AwardBIOS screen where it is listing the SATA/IDE devices, and it is showing garbage for the identity of one of the disks, which should actually be "none" It looks like the motherboard has gone kaput. The motherboard is an EVGA NF790i, are there any diagnostic tools that I can use to determine this? (as I would prefer to not send the motherboard back, only to discover that it is the RAM or the CPU) ps I can't get it to boot from the memTest disk, so I can't run that diagnostic. Thanks!

  Read the article

• How does RAM fail?

  - by ethanlee16

  I have an issue with a Dell Inspiron 15 (1545) laptop that refuses to open any applications (save select Microsoft programs, e.g. Security Essentials, Ctrl Panel, Windows Explorer (not Internet), regedit, Event Viewer, etc.). I've run Microsoft Memory Diagnostics Tool and it found a 'hardware problem was detected.' Does this indicate that the RAM has failed? I notice when I open programs like Word, Excel, Internet Explorer, etc., it always give me an error from WerFault.exe saying The instruction at xxxxxxx referenced memory at xxxxxxxxx. The memory could not be written. and sometimes something about illegal instructions. If it is a hardware problem, does this mean that replacing the RAM is my only option? Again, I would also like to know if RAM can fail (like hard drives) and if malware can cause RAM to fail also.

  Read the article

• Secure method of changing a user's password via Python script/non-interactively

  - by Matthew Rankin

  I've created a Python script using Fabric to configure a freshly built Slicehost Ubuntu slice. In case you're not familiar with Fabric, it uses Paramiko, a Python SSH2 client, to provide remote access "for application deployment or systems administration tasks." One of the first things I have the Fabric script do is to create a new admin user and set their password. Unlike Pexpect, Fabric cannot handle interactive commands on the remote system, so I need to set the user's password non-interactively. At present, I'm using the chpasswd command to change the password. This transmits the password as clear text over SSH to the remote system. Questions Is my current method of setting the password a security concern? Currently, the drawback I see is that Fabric shows the password as clear text on my local system as follows: [xxx.xx.xx.xxx] run: echo "johnsmith:supersecretpassw0rd" | chpasswd. Since I only run the Fabric script from my laptop, I don't think this is a security issue, but I'm interested in others' input. Is there a better method for setting the user's password non-interactively? Another option, would be to use Pexpect from within the Fabric script to set the password. Current Code # Fabric imports and host configuration excluded for brevity root_password = getpass.getpass("Root's password given by SliceManager: ") admin_username = prompt("Enter a username for the admin user to create: ") admin_password = getpass.getpass("Enter a password for the admin user: ") env.user = 'root' env.password = root_password # Create the admin group and add it to the sudoers file admin_group = 'admin' run('addgroup {group}'.format(group=admin_group)) run('echo "%{group} ALL=(ALL) ALL" >> /etc/sudoers'.format( group=admin_group) ) # Create the new admin user (default group=username); add to admin group run('adduser {username} --disabled-password --gecos ""'.format( username=admin_username) ) run('adduser {username} {group}'.format( username=admin_username, group=admin_group) ) # Set the password for the new admin user run('echo "{username}:{password}" | chpasswd'.format( username=admin_username, password=admin_password) ) Local System Terminal I/O $ fab config_rebuilt_slice Root's password given by SliceManager: Enter a username for the admin user to create: johnsmith Enter a password for the admin user: [xxx.xx.xx.xxx] run: addgroup admin [xxx.xx.xx.xxx] out: Adding group `admin' (GID 1000) ... [xxx.xx.xx.xxx] out: Done. [xxx.xx.xx.xxx] run: echo "%admin ALL=(ALL) ALL" >> /etc/sudoers [xxx.xx.xx.xxx] run: adduser johnsmith --disabled-password --gecos "" [xxx.xx.xx.xxx] out: Adding user `johnsmith' ... [xxx.xx.xx.xxx] out: Adding new group `johnsmith' (1001) ... [xxx.xx.xx.xxx] out: Adding new user `johnsmith' (1000) with group `johnsmith' ... [xxx.xx.xx.xxx] out: Creating home directory `/home/johnsmith' ... [xxx.xx.xx.xxx] out: Copying files from `/etc/skel' ... [xxx.xx.xx.xxx] run: adduser johnsmith admin [xxx.xx.xx.xxx] out: Adding user `johnsmith' to group `admin' ... [xxx.xx.xx.xxx] out: Adding user johnsmith to group admin [xxx.xx.xx.xxx] out: Done. [xxx.xx.xx.xxx] run: echo "johnsmith:supersecretpassw0rd" | chpasswd [xxx.xx.xx.xxx] run: passwd --lock root [xxx.xx.xx.xxx] out: passwd: password expiry information changed. Done. Disconnecting from [email protected]... done.

  Read the article

• New Seagate GoFlex external hard drive reporting temperature 50C and higher--defective or normal?

  - by rob

  I have a brand-new Seagate GoFlex hard drive, and my SMART diagnostics program (CrystalDiskInfo) is warnings me that the drive is running too hot. The lowest reported temperature I've seen it is 48C, and the highest so far is 56C (all of last week, it was at 50C). According to several sources I've found online, including a Google study, hard disks operating higher than 40C have shorter lifespans. The temperature in the room is usually about 23C (74F), and orienting the drive vertically vs. horizontally doesn't seem to affect the operating temperature. Does anyone else have a GoFlex external desktop drive that runs at 40C or cooler? Is my drive just defective, or is this high temperature common for these drives?

  Read the article

• Remote desktop session ends abruptly with a "protocol error"

  - by Jon

  Intermittently we get a problem where a remote desktop session will get disconnected with the error message “Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.” We are getting this with one server only which is running Windows Server 2008, connecting with Windows 7 clients. The session itself stays running, you just get disconnected, and you can try and reconnect. Sometimes you get in for a while then it will kick you out. We are connecting from Windows 7 clients. We have tried connecting using Cord on a Mac and this works fine, so it's not like the session itself is corrupted. One problem is that there are some critical applications running under the session (I know, let's not discuss the idiocy of that), so we cannot reset the session in any way during the working day – so any diagnostics must have minimum impact. Thanks, Jon

  Read the article

• Partition error being reported by only some programs

  - by Mahmoud20070

  I am getting an error about the partitions on one of my drives. I checked my hard disk with Acronis Disk Director 11 Home, HDTunePro, MiniTool Partition Wizard, Hddscan, HDD Regenerator 2011, WD Data Lifeguard Diagnostics, GParted, and Parted Magic, but none of them found any problems with the drive. However, when I perform a check with PartitionGuru, DiskGenius, and an old version of Partition Magic (8.0), I get the following error (seen below) about the partition being bad and needing to reformat to fix it: Error - The number of sectors record in DBR overflow - Reformat Should I reforamt or not? I checked two other hard drives, one of them like my 500 WD Blue, and neither has any errors with any progras. Are there any other programs that can check partitions for errors? Finally, how should a large SATA hard disk be formatted? I currently use programs like GParted, Acronis Disk Director, or MiniTool Partition Wizard. Are these programs good for formatting a new hard disk? Could the choice of format tool be the cause of the error?

  Read the article

• BluRay audio/video stuttering with PowerDVD 11, WinDVD 11 Pro, etc? Xonar/Auzen HD audio option?

  - by jrista

  I recently upgraded my Windows 7 MediaCenter HTPC due to a motherboard failure (really old motherboard and cpu, it was on its last legs.) I chose to upgrade to an i5 system with everything built into the motherboard. I did my due diligence, researched, and found some hardware that was within my budget. I ended up with: Core i5 2500K (3.3Ghz) Corsair XMS3 2x2Gb DDR3 (4Gb) ASUS P8H 61-M LE/CSM MicroCenter 64Gb SSD (Previous BluRay player, forget the brand) The system is pretty awesome, and plays everything I have perfectly. I almost went with an Atom solution, however there have been numerous notes that they do not play NetFlix Instant Watch well...and I am a heavy Netflix IW user. High definition BluRay rips work well, although they usually contain lower audio quality than the BluRay's they were ripped from. The real problem I am encountering is playing back BluRay video from discs. For some reason, I am encountering rather terrible stuttering problems with both the audio and video. The stuttering is synchronous in both, and occurs at seemingly random intervals. I've used PowerDVD 9, PowerDVD 11 trial, and WinDVD 11 Pro trial. All three have stuttering problems, although PowerDVD 11 seems to have the least. Watching system resource usage, CPU load is never above 20%, and memory usage tends to be a constant 1/3rd the total available system memory. When playback is fine, its superb...the video is crystal clear. The audio quality is ok, certainly not what I would expect from a BluRay disc. I did some research, and it seems that playing BluRay from a PC causes a downsampling of the audio? I am curious if the audio is my primary problem here, the cause of the stuttering I am encountering? When stuttering occurs, the audio gets REALLY bad, while the video just pauses momentarily every second until for whatever reason everything picks up and runs fine (usually after a few seconds to a couple minutes.) The audio chipset is a Realtek HD ALC887 8-channel, supposedly designed to support BluRay playback. Has anyone encountered any issues like this playing back bluray discs on a PC (namely with PowerDVD...WinDVD was FAR worse, and seemed to have real trouble even reading the discs, and I have no interest in fiddling with it further.) Is there any reason to suspect the video decoding as the problem?(Given how bad the audio gets during a stutter, and how clean the video remains, I am inclined to think the issue boils down to audio.) Is it even remotely possible that the motherboard, cpu, or ram are causing the stuttering (all three are pretty blazing fast...faster than the hardware that I replaced, which seemed to play BluRay fine with PowerDVD 9.) I've read a bit about the Asus Xonar HDAV 1.3 and the Auzen X-Fi HomeTheater HD home theater hi-fi audio cards. Seems they are the only way to get true full-quality, uncompressed BluRay audio bitstreaming over HDMI on a PC. None of the usual suspects seem to have these cards in stock, however. Are these cards worth getting? Are they even still available, or have they been discontinued (if so, that would indeed be sad...they sound simply fantastic.)

  Read the article

• Exchange 2003-Exchange 2010 post migration GAL/OAB problem

  - by user68726

  I am very new to Exchange so forgive my newbie-ness. I've exhausted Google trying to find a way to solve my problem so I'm hoping some of you gurus can shed some light on my next steps. Please forgive my bungling around through this. The problem I cannot download/update the Global Address List (GAL) and Offline Address Book (OAB) on my Outlook 2010 clients. I get: Task 'emailaddress' reported error (0x8004010F) : 'The operation failed. An object cannot be found.' ---- error. I'm using cached exchange mode, which if I turn off Outlook hangs completely from the moment I start it up. (Note I've replaced my actual email address with 'emailaddress') Background information I migrated mailboxes, public store, etc. from a Small Business Server 2003 with Exchange 2003 box to a Server 2008 R2 with Exchange 2010 based primarily on an experts exchange how to article. The exchange server is up and running as an internet facing exchange server with all of the roles necessary to send and receive mail and in that capacity is working fine. I "thought" I had successfully migrated everything from the SBS03 box, and due to huge amounts of errors in everything from AD to the Exchange install itself I removed the reference to the SBS03 server in adsiedit. I've still got access to the old SBS03 box, but as I said the number of errors in everything is preventing even the uninstall of Exchange (or the starting of the Exchange Information Store service), so I'm quite content to leave that box completely out of the picture while trying to solve my problem. After research I discovered this is most likely because I failed to run the “update-globaladdresslist” (or get / update) command from the Exchange shell before I removed the Exchange 2003 server from adsiedit (and the network). If I run the command now it gives me: WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Offline Address Book - first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Schedule+ Free Busy Information – first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameArchive" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameContacts" is invalid and couldn't be updated. (Note that I’ve replaced my domain with “domainname.com” and my organization name with “containername”) What I’ve tried I don’t want to use the old OAB, or GAL, I don’t care about either, our GAL and distribution lists needed to be organized anyway, so at this point I really just want to get rid of the old reference to the “first administrative group” and move on. I’ve tried to create a new GAL and tell Exchange 2010 to use that GAL instead of the old GAL, but I'm obviously missing some of the commands or something dumb I need to do to start over with a blank slate/GAL/OAB. I'm very tempted to completely delete the entire "first administrative group" tree from adsiedit and see if that gets rid of the ridiculous reference that no longer exists but I dont want to break something else. Commands run to try to create a new GAL and tell exch10 to use that GAL: New-globaladdresslist –name NAMEOFNEWGAL Set-globaladdresslist GUID –name NAMEOFNEWGAL This did nothing for me except now when I run get-globaladdresslist or with the | FL pipe I see two GALs listed, the “default global address list” and the “NAMEOFNEWGAL” that I created. After a little more research this morning it looks like you can't change/delete/remove the default address list, and the only way to do what I'm trying to do would be to maybe remove the default address list via adsiedit and recreate with a command something like new-GlobalAddressList -Name "Default Global Address List" -IncludedRecipients AllRecipients. This would be acceptable but I've searched and searched and can't find instructions or a breakdown of where exactly the default GAL lives in AD, and if I'd have to remove multiple child references/records. Of interest I'm getting an event ID 9337 in my application log OALGen did not find any recipients in address list \Global Address List. This offline address list will not be generated. -\NAMEOFMYOAB --------- on my Exchange 2010 box, which pretty much to me seems to confirm my suspicion that the empty GAL/OAB is what's causing the Outlook client 0x8004010F error. Help please!

  Read the article

• Is it possible to write C# code as below and send email using network in different country?

  - by kedar karthik

  Is it possible to write C# code as below and send email using mnetwork in different country? MSExchangeWebServiceURL = mail.something.com/ews/exchange.asmx its a web service URL ... sorry to correct my self //....this works great when i run the same code from home network, my friends home network ... anywhere around ... but when i run it from my clients location in columbia ... it fails I have a valid user name and password on that exchange server. Is there any configuration that I can set to achieve this? BTW this code below works when I run it within office network and any network within any home network ... i have tried atleast 5 friends network in Plano, Texas. I want this code to work when run from any network in another country. My client in columbia can connect to web service using a browser .. use the same user name and password ..... but when i run the code above ... it is not able to connect to our web service .... String cMSExchangeWebServiceURL = (String)System.Configuration.ConfigurationSettings.AppSettings["MSExchangeWebServiceURL"]; String cEmail = (String)System.Configuration.ConfigurationSettings.AppSettings["Cemail"]; String cPassword = (String)System.Configuration.ConfigurationSettings.AppSettings["Cpassword"]; String cTo = (String)System.Configuration.ConfigurationSettings.AppSettings["CTo"]; ExchangeServiceBinding esb = new ExchangeServiceBinding(); esb.Timeout = 1800000; esb.AllowAutoRedirect = true; esb.UseDefaultCredentials = false; esb.Credentials = new NetworkCredential(cEmail, cPassword); esb.Url = cMSExchangeWebServiceURL; ServicePointManager.ServerCertificateValidationCallback += delegate(object sender1, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; }; // Create a CreateItem request object CreateItemType request = new CreateItemType(); // Setup the request: // Indicate that we only want to send the message. No copy will be saved. request.MessageDisposition = MessageDispositionType.SendOnly; request.MessageDispositionSpecified = true; // Create a message object and set its properties MessageType message = new MessageType(); message.Subject = subject; message.Body = new TestOutgoingEmailServer.com.cogniti.mail1.BodyType(); message.Body.BodyType1 = BodyTypeType.HTML; message.Body.Value = body; message.ToRecipients = new EmailAddressType[3]; message.ToRecipients[0] = new EmailAddressType(); //message.ToRecipients[1] = new EmailAddressType(); //message.ToRecipients[2] = new EmailAddressType(); message.ToRecipients[0].EmailAddress = "[email protected]"; message.ToRecipients[0].RoutingType = "SMTP"; //message.CcRecipients = new EmailAddressType[1]; //message.CcRecipients[0] = new EmailAddressType(); //message.CcRecipients[0].EmailAddress = toEmailAddress.ElementAt(1).ToString(); //message.CcRecipients[0].RoutingType = "SMTP"; //There are some more properties in MessageType object //you can set all according to your requirement // Construct the array of items to send request.Items = new NonEmptyArrayOfAllItemsType(); request.Items.Items = new ItemType[1]; request.Items.Items[0] = message; // Call the CreateItem EWS method. CreateItemResponseType response = esb.CreateItem(request);

  Read the article

• Why would VMWare to go defunct? How to recover from/prevent it?

  - by Josh

  I am running VMWare Server 2.0.2 (Build 203138) on a dual core Intel i5 with Ubuntu Server 10.04 LTS system (kernel 2.6.32-22-server #33-Ubuntu SMP). Disk Subsystem is a software RAID5 array. The system has been set up for a little over a week. For the past 5 days I have been running at leat 3 VMs (Linux and a variety of Windows OSes) with no issues whatsoever. But while I was installing Linux onto a new VM, suddenly all VMs became unresponsive, including the one I was installing to. I could not log in to the VMWare Management Interface, and the system was somewhat unresponsive via SSH. When I looked at top, I saw: top - 16:14:51 up 6 days, 1:49, 8 users, load average: 24.29, 24.33 17.54 Tasks: 203 total, 7 running, 195 sleeping, 0 stopped, 1 zombie Cpu(s): 0.2%us, 25.6%sy, 0.0%ni, 74.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8056656k total, 5927580k used, 2129076k free, 20320k buffers Swap: 7811064k total, 240216k used, 7570848k free, 5045884k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 21549 root 39 19 0 0 0 Z 100 0.0 15:02.44 [vmware-vmx] <defunct> 2115 root 20 0 0 0 0 S 1 0.0 170:32.08 [vmware-rtc] 2231 root 21 1 1494m 126m 100m S 1 1.6 892:58.05 /usr/lib/vmware/bin/vmware-vmx -# product=2; 2280 jnet 20 0 19320 1164 800 R 0 0.0 30:04.55 top 12236 root 20 0 833m 41m 34m S 0 0.5 88:34.24 /usr/lib/vmware/bin/vmware-vmx -# product=2; 1 root 20 0 23704 1476 920 S 0 0.0 0:00.80 /sbin/init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 [kthreadd] 3 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/0] 4 root 20 0 0 0 0 S 0 0.0 0:00.84 [ksoftirqd/0] 5 root RT 0 0 0 0 S 0 0.0 0:00.00 [watchdog/0] 6 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/1] The VMWare process for the virtual machine I was installing into became a zombie. Yet, it was still consuming 100% of the CPU time on one of the cores, and I couldn't reach it or any other virtual machines. (I was logged in to one virtual machine over SSH, another via X11, and a third via VNC. All three connections died). When I ran ps -ef and similar commands, I found that the defunct vmware-vmx process had it's parent PID set to init (1). I also used lsof -p 21549 and found that the defunct process had no open files. Yet it was using 100% of CPU time... I was unable to kill any vmware-vmx processes, including the defunct one, even with kill -9. As a last resort to resolve the situation I tried to reboot the box, however shutdown, halt, reboot, and init 6 all failed to reboot/shutdown, even when given appropriate --force settings. ControlAltDel produced a message about rebooting on the console, but the system would not reboot. I had to hard power-cycle the box to resolve the situation. (See my other question, Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?) What would cause a scenario like this? What else could I have done to resolve it besides a hard reboot? What can I do to prevent such a situation in the future?

  Read the article

• Windows 7 Locking up Randomly

  - by Michael Moore

  I've got a Windows 7 machine that is locking up randomly. It can be in the first thirty seconds, or it can be hours later. There is nothing specific I can find that is running when it happens. When it locks, the screen doesn't change, but nothing moves. The waiting icon stops, the mouse stops, keyboard doesn't work, etc. I've even tried the crash on ctrl-scrl registry hack, and it won't even dump the kernel. I've run hardware diagnostics on the RAM and it doesn't find any problems. I would think it is a hardware issue, but on this exact same machine, I can run 64 Bit Ubuntu and it has zero problems. I've even tried reinstalling Windows7 from scratch, and it still happens. Anyone have any ideas? Any good diagnostic tools to recommend? Thanks! Michael

  Read the article

• Error on installing SVN extension with pecl

  - by thedp

  Hello, I'm trying to install the following PHP extension: http://php.net/manual/en/book.svn.php But when I do pecl install svn-beta I receive an error message that it can't locate the svn_client.h file. I searched the net but couldn't find any useful reference to this error. Thank you for your help. Installation result: root@myUbuntu:/home/thedp# pecl install svn-beta downloading svn-0.5.1.tgz ... Starting to download svn-0.5.1.tgz (23,563 bytes) .....done: 23,563 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 1. Please provide the prefix of Subversion installation : autodetect 1-1, 'all', 'abort', or Enter to continue: 1. Please provide the prefix of the APR installation used with Subversion : autodetect 1-1, 'all', 'abort', or Enter to continue: building in /var/tmp/pear-build-root/svn-0.5.1 running: /tmp/pear/temp/svn/configure --with-svn --with-svn-apr checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc and cc understand -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 checking for PHP extension directory... /usr/lib/php5/20060613+lfs checking for PHP installed headers prefix... /usr/include/php5 checking for re2c... no configure: WARNING: You will need re2c 0.12.0 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for svn support... yes, shared checking for specifying the location of apr for svn... yes, shared checking for svn includes... configure: error: failed to find svn_client.h ERROR: `/tmp/pear/temp/svn/configure --with-svn --with-svn-apr' failed

  Read the article

• Connected to internet but can't browse after trying to remove Covenant Eyes

  - by Joanna

  I recently got a MacBook Pro. It connects to ethernet\wifi and has internet but when I open Safari or Firefox, nothing happens. I get a timeout for all websites. I had Covenant Eyes on my Mac before and tried to remove it. My friends who work with computers have tried everything (ping, nslookup etc). Network diagnostics show no problems I can see I'm connected through ifconfig because I get an IP. I also get a response pinging www.google.gr. There are no proxies set in my Network preferences. Any ideas?

  Read the article

• Remote desktop session ends abruptly with a "protocol error"

  - by Jon

  Intermittently we get a problem where a remote desktop session will get disconnected with the error message “Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.” We are getting this with one server only which is running Windows Server 2008, connecting with Windows 7 clients. The session itself stays running, you just get disconnected, and you can try and reconnect. Sometimes you get in for a while then it will kick you out. We are connecting from Windows 7 clients. We have tried connecting using Cord on a Mac and this works fine, so it's not like the session itself is corrupted. One problem is that there are some critical applications running under the session (I know, let's not discuss the idiocy of that), so we cannot reset the session in any way during the working day – so any diagnostics must have minimum impact. Thanks, Jon

  Read the article

• Is there a common X-Header for RFC 2821 "MAIL FROM"? Should it be DKIM signed?

  - by makerofthings7

  w.r.t. the difference between RFC2821 MAIL From and RFC2822 FROM I'm considering having my MTA add a header specifying what was sent in the MAIL FROM portion of the envelope. The RFC2821 header is used for receiving email bouncebacks, and is the header that is checked in SPF and some SenderID configurations. The goal is to make it easier for diagnostics and debugging by having this low level information in the email header. What is an acceptable name for this SMTP header? Should this header be signed by DKIM? Is there any reason why it shouldn't be signed?

  Read the article

• Windows 7, HTTPS WebDav: Asks for password twice and fails. Any workarounds?

  - by AutoDMC

  Howdy. I have a Dav server running with PHP SabreDav (code.google.com/p/sabredav/wiki/Windows) on Cherokee at an HTTPS secured URL. It's set to use https, and uses Digest Authentication. I can log in with multiple browsers and a few third party clients (BitKinex and Java AnyClient can connect and browse as well, caveats below). However, when attempting to log in with Windows 7 (surprise, surprise), it asks for my password twice, then tells me that my folder is invalid. I have verified that the server is using Digest authentication. I've verified multiple times that third party software can connect. I even went out and bought a GoDaddy SSL certificate so my SSL wouldn't be self signed anymore. I've applied the registry hacks here: support.microsoft.com/kb/943280 (Note that the article says the "fix" already exists for Windows 7, I just need magical registry hax to get it to work) I've applied the registry hacks here: support.microsoft.com/kb/941050 I've applied the registry hacks here: support.microsoft.com/kb/841215 (Supposedly allows Basic Auth, which shouldn't apply, but why not?) All to no avail; Windows continues to ask for my password twice, then state that "The folder you entered does not appear to be valid. Please choose another." Try the command line? Sure: I've attempted to access with NET USE "https://dav.example.com/" password /USER:me (System error 59) I've attempted to access with NET USE "https://dav.example.com/" (System error 1790) I've attempted to access with NET USE "https://dav.example.com/subdir/" password /USER:me (System error 59) I've attempted to access with NET USE "https://dav.example.com/subdir/" (System error 1790) For good luck: ping dav.example.com ... works. And again, web browsers can access the share just fine, so can third party tools. Best I can tell at this point is "HAHA, NO WEBDAV FOR YOU ON WINDOWS 7" which would be fine except everyone who will be using this application... uses Windows 7. And most are not as persistent or pugnacious as I am. I feel like I've burned through every random suggestion I've found anywhere in the first 10 pages of Google on every search term I can think of. Any ideas? I need it to be Webdav, I need it to be over HTTPS, and I really do need a method to access it from Windows 7. EXTRA DETAIL: However, the "third party" programs I've tried have either been buggy, incomplete, or have silly ... "glitches." For example, BitKinex seems to fixate on any http error codes sent, so if there's a glitch reading a directory, BAM, that directory is always listed empty. Long directory listings also show up as blank, even though the transfer panel shows that directory listing is still taking place. In any case, BitKinex is useless for development purposes for the reasons above. And besides, I'm building this for people other than myself, people who will want to get this dav share working "the regular way."

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

  - by Mike

  The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

  Read the article

< Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >