Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 527/584 | < Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >

• Problem with DualBooting Ubuntu 13.10 and Win7

  - by VinArrow

  this is my first post here on AskUbuntu, not first time using it though. I wanted to install Ubuntu 13.10 on my PC to have all my work stuff there and leave Win7 for gaming. So i did my research on how to Dual Boot when you already have Win7 installed, here are the steps i took Used Disk Management on Win7 and shrunk that partition, leaving 80GB free for Ubuntu. Made a Bootable pendrive following the instructions on Ubuntu`s website. During the installation steps there was supposed to be a Install alongside Win7, but there wasnt, so i chose Something else. Everything was fine and i was able to install Ubuntu no problem on my unallocated 80GB partition (76GB Ubuntu + 4GB swap) There was a prompt for me to restart my PC and so I did expecting to see the dual boot screen (grub right?) Now, when i restarted my PC, Grub never showed up and it booted straight to Windows. Then I did some more research and found out that that could happen. Tried three things then Plugging in bootable pendrive again and selected Try Ubuntu without installing. Then i followed some instructions found here (How can I repair grub? (How to get Ubuntu back after installing Windows?)) and i could chroot into my Ubuntu install just fine. Repaired grub as instructed on that link, restarted the PC and booted straight into Win7 again. Again, used the bootable pen drive to Try Ubuntu... and used the Boot-repair tool (recommended repair). Again, booted straight into Win7. Lastly, i installed easyBCD on my Win7 and made a new entry for Ubuntu (Linux/BSD). When i rebooted the PC, there was the option to choose between Win7 and Linux, chose linux and it didnt work, taking me straight to a command line-like enviroment that read Minimum bash like scripting or something, as if I didn`t have a Linux OS installed. So, I thought I`d try and repair my Ubuntu install. And during the Installation method step there was the choice to install alongside Ubuntu 13.10! and that right there drove me crazy. Here is a screenshot of gparted showing how things are set up now http://imageshack.us/f/801/77u3.png/ Notice on the left-hand side how i can access my installation files just fine. sdb1- win7 reserved space, sdb2- win7 OS, sdb3- 76GB ubuntu install, sdb5- 4GB swap area. Does anyone know why my Ubuntu 13.10 is not being recognized? and what should I do to get it working? Thanks and sorry for the long read and bad english! (BIOS = legacy)

  Read the article

• Taking a Projects Development to the Next Level

  - by user1745022

  I have been looking for some advice for a while on how to handle a project I am working on, but to no avail. I am pretty much on my fourth iteration of improving an "application" I am working on; the first two times were in Excel, the third Time in Access, and now in Visual Studio. The field is manufacturing. The basic idea is I am taking read-only data from a massive Sybase server, filtering it and creating much smaller tables in Access daily (using delete and append Queries) and then doing a bunch of stuff. More specifically, I use a series of queries to either combine data from multiple tables or group data in specific ways (aggregate functions), and then I place this data into a table (so I can sort and manipulate data using DAO.recordset and run multiple custom algorithms). This process is then repeated multiple times throughout the database until a set of relevant tables are created. Many times I will create a field in a query with a value such as 1.1 so that when I append it to a table I can store information in the field from the algorithms. So as the process continues the number of fields for the tables change. The overall application consists of 4 "back-end" databases linked together on a shared drive, with various output (either front-end access applications or Excel). So my question is is this how many data driven applications that solve problems essentially work? Each backend database is updated with fresh data daily and updating each takes around 10 seconds (for three) and 2 minutes(for 1). Project Objectives. I want/am moving to SQL Server soon. Front End will be a Web Application (I know basic web-development and like the administration flexibility) and visual-studio will be IDE with c#/.NET. Should these algorithms be run "inside the database," or using a series of C# functions on each server request. I know you're not supposed to store data in a database unless it is an actual data point, and in Access I have many columns that just hold calculations from algorithms in vba. The truth is, I have seen multiple professional Access applications, and have never seen one that has the complexity or does even close to what mine does (for better or worse). But I know some professional software applications are 1000 times better then mine. So Please Please Please give me a suggestion of some sort. I have been completely on my own and need some guidance on how to approach this project the right way.

  Read the article

• Why do some user agents have spam urls in them (and why are they always Opera/Presto User-Agents)?

  - by Erx_VB.NExT.Coder

  If you go to (say) the last 100 entries (visits) to the botsvsbrowsers.com website (exact link, feel free to take a look: http://www.botsvsbrowsers.com/recent/listings/index.html ), you'd notice that almost every User Agent that has the keywords "Opera" and "Presto" inside them, will almost certainly have a web link (URL/Web Address) inside it, and it won't just be a normal web address, but a HTML anchor tag/link to that address. Why is this so, I could not even find a single discussion about it on the internet, nowhere, I tried varying my search terms many times. If the user agent contains the words "Opera" and "Presto" it doesnt mean it will have this weblink, but it means there is about an 80% change that it will. A typical anchor tag/link inside a user agent will look like this: Mozilla/4.0 <a href="http://osis-uk.co.uk/disabled-equipment">disability equipment</a> (Windows NT 5.1; U; en) Presto/2.10.229 Version/11.60 If you check it out at the website, http://www.botsvsbrowsers.com/recent/listings/index.html you will notice that the back and forward arrows are in there unescaped format. This isn't just true for botsvsbrowsers, but several other user agent listing sites. I'm really confused and feel line I'm in a room full of 10,000 people and am the only one seeing this ghost :). If I'm doing statistical analysis, should I include or exclude this type of user agent from my listing (ie: are these just normal users who've set their user agents to attempt to drive some traffic to their sites as they browser the web), or is there something else going on? The fact that it is so consistent in terms of its format leads me to believe that it is an automated process (the setting or alteration of the user agent) so I cannot decide or understand the process by which this change is made (I know how to change a user agent), but unsure which program or facility is doing this, especially since it is exclusive to Opera (Presto) user agents that are beyond I think an 8 or 9 point something browser version. I've run some statistical tests, parsing entries from all over the place, writing custom programs, to get a better understanding of this. Keep in mind that I see normal URL's in user agents infrequently, they are just text such as +http://www.someSite.com appended to a user agent normally, especially if its a crawler or bot it provided its service URL, this is normal and isnt done with an embedded link (A HREF=) etc, so I'm not talking about "those".

  Read the article

• How do you feel about being asked to code during an interview?

  - by Mystere Man

  I have seen a lot of comments about good interview questions and puzzles to require potential developers to solve during the interview process. I have personally had several interviews in which the interviewer has asked me to write some piece of code or solve a problem during the interview, and I have always performed very poorly in these "tests". The reason is simple, as a developer who spends my days talking to computers, I find I have to prepare myself and "switch gears" to be in "interview mode". I prepare myself to make a good impression. When I'm programming, I'm very focused and am totally different from when I'm being "interpersonal". I just can't get into "the zone" when I'm also having to be a charming and witty potential employee. I feel that by asking a developer to prove his skills during an interview, all you're doing is finding out if they can code under pressure, and at the drop of a hat. It has almost no ability to determine how you would perform in a "real life" development situation. Maybe, if you're looking for someone that can code and chat at the same time, i can see how that would be beneficial. But I think you overlook potential candidates that simply do not perform well in such an artificial environment. While I appreciate that a potential employer wants to see what I can do, I don't think an interview is the place for such a test. I mean, suppose a job for an over the road trucker required that you drive while being interviewed. How does that really end well? So I'm curious as to what others think about such situations. Have you failed interviews because you were not in the right frame of mind? Have you failed to make a good interpersonal impression because you were too distracted trying to solve the problem? If you're a hiring manager, or someone that gives interviews, do you even think about such things? Is it really important that someone perform well in an interview? EDIT: To clarify, I'm not against testing applicants. My concern is about testing during an interview. See also: What are the pros and cons for the employer of code questions during an interview? looking at this from the interviewer's point of view.

  Read the article

• It’s that Time of Year Again… OPN Survey Time!

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Whether you’re still carving pumpkins or getting ready to carve a turkey, be sure to carve out your chance to win one of 5 Apple i-Pads, by taking our Oracle PartnerNetwork Survey! On October 12th, Oracle Alliances and Channels sent out invitations asking you to complete the Oracle PartnerNetwork Survey and provide feedback on Oracle’s Enablement, Partner Business Center, OPN Portal, Communications, Benefits, OPN Competency Center, Solutions Catalog and Marketing.  So, if you’re feeling as festive as we are, and received an invitation to participate, we hope you take this opportunity to provide us feedback so we can continue to drive meaningful programs and interactions with you, our partners! If you didn’t receive an invitation but still want to get the get the holidays started with your very own i-Pad, you’re welcome to send us a note at [email protected] with your candid feedback, or request to be added to the list for future surveys. The drawing for the Apple i-Pads will take place after the survey closes mid November. Thank you in advance for your participation and we look forward to receiving your response. Let the holiday season begin! The OPN Communications Team

  Read the article

• Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

  - by Steve

  I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

  Read the article

• Recommended learning path?

  - by stairmast0r

  First, my current standing: I know C++ at an.. advanced beginner level? I've gone through a book, I know the syntax well enough, I know a fair amount of standard library functions, and I've programmed some simple console stuff with it. I'd probably be able to program more with it if I knew how to structure a program, but I just can't seem to wrap my head around the whole concept of structuring something remotely complex. I've messed around with Java for a day or two, and the syntax was extremely easy to get the hang of, except that I didn't really know any functions. I'm plenty willing to learn, and to work hard to do so, but I don't really know where to go from here. Now, at the risk of sounding cliche, what I'd like to become is someone like the great three of id; Carmack, Romero, and Abrash. To be considered a genius. I believe anything can be learned, and nothing mentally limits anyone except lack of desire to learn. But I don't know how to learn this. They learned by doing, and making do with what resources they had. On the other hand, I have access to almost any books I want, access to the internet, and access to a more than capable computer and software. Should I learn more languages? Assembly? LISP? BASIC? Haskell? Should I dive straight into advanced topics like OpenGL? Or should I wait until I feel I've come closer to mastering the simpler things, like console programs, first? Should I follow tutorials? Should I follow books? Should I just dive into writing something and follow a reference manual as I go? What order should I do all this in? How should I do it? I want to completely master this; to be considered a genius. The most perfect career I can imagine is to start the next id. I have the drive to do it, I just don't know where to begin...

  Read the article

• Is Ubuntu recognizing and/or using my NVIDIA graphics card?

  - by user212860

  This is my first post here, and I'm pretty new to Ubuntu/Linux. I currently have no other OS except for Ubuntu 13.10. (I used to have Win7 until i got a new terabyte hard drive). My current PC build, if any of this helps: CPU: Intel i5 quad-core Graphics: NVIDIA GeForce GTX 650 RAM: 8 GB HDD: 1 TB SATA 3 Motherboard: MSi Z77 A-G41 OS Ubuntu 13.10 So I recently installed Ubuntu 13.10 and put Steam on it, and I'm seeing that my games run a lot slower than they did when I had Win7. I figured it was a graphics problem, so I checked System Settings Details Overview. It says in "Graphics" that I have "Gallium 0.4 on NVE7" (don't really know what that is). Does this mean that Ubuntu is not using my graphics card? In System Settings Software & Updates Additional Drivers, it clearly shows like this: NVIDIA Corporation: GK107 [GeForce GTX 650] -This device is using an alternative driver (And then it shows a list of drivers that I can switch back and forth to) So this is a bit confusing. In Software and Updates, it clearly shows that I have my NVIDIA card installed, and that I have a driver selected for it. But in System Settings, it shows I have some Gallium 0.4 thing. I had done a bit of research, and ended up typing command: "lspci|grep VGA" in the Terminal. It showed this in response: VGA compatible controller: NVIDIA Corporation GK107 [GeForce GTX 650] (rev a1) The Terminal seems to recognize my graphics card. What it looks like to me, is that I don't have the proper driver, and I might be using my CPU's integrated graphics. When I switch around which driver I am using in that list, it still does not see my card in System Settings. Some of the drivers in the list give me some sort of OpenGL error when I try to run a game. It might just be that my games are running slow because the game developers have not optimized it for Ubuntu that well. However, that still doesn't take away from the fact that System Settings is not showing my NVIDIA card. TL;DR Version: How do I know if my video card is being recognized/used? If my video card is not being used, what is the best way fix that? Please make your answers easy to understand. I do not mind wordy responses, as long as I can follow what you're saying. Any help would be greatly appreciated! Thanks, Jabber5

  Read the article

• ?SPARC T4?????????????·???? : Netra SPARC T4-1

  - by user13138700

  ?SPARC T4???????????????·??????? Netra SPARC T4-1 ???? Netra SPARC T4-2 ?2012?1?10??????????3?15??????????????(????) ?????????? Netra SPARC T4-1 ? 4core ???( T4 ???????? 4core ???)(*)???????????????????????????(*)( Netra SPARC T4-1 ?????? 4core ???? 8core ????????) ??? prtdiag ????? pginfo ??????????????? 8????/1core ???? prtdiag ????????4core=32???????????????pginfo ?????????????????core ???????????????????? # ./prtdiag -v System Configuration: Oracle Corporation sun4v Netra SPARC T4-1 ???????: 130560 M ??? ================================ ?? CPU ================================ CPU ID Frequency Implementation Status ------ --------- ---------------------- ------- 0 2848 MHz SPARC-T4 on-line 1 2848 MHz SPARC-T4 on-line 2 2848 MHz SPARC-T4 on-line 3 2848 MHz SPARC-T4 on-line 4 2848 MHz SPARC-T4 on-line 5 2848 MHz SPARC-T4 on-line 6 2848 MHz SPARC-T4 on-line 7 2848 MHz SPARC-T4 on-line 8 2848 MHz SPARC-T4 on-line 9 2848 MHz SPARC-T4 on-line 10 2848 MHz SPARC-T4 on-line 11 2848 MHz SPARC-T4 on-line 12 2848 MHz SPARC-T4 on-line 13 2848 MHz SPARC-T4 on-line 14 2848 MHz SPARC-T4 on-line 15 2848 MHz SPARC-T4 on-line 16 2848 MHz SPARC-T4 on-line 17 2848 MHz SPARC-T4 on-line 18 2848 MHz SPARC-T4 on-line 19 2848 MHz SPARC-T4 on-line 20 2848 MHz SPARC-T4 on-line 21 2848 MHz SPARC-T4 on-line 22 2848 MHz SPARC-T4 on-line 23 2848 MHz SPARC-T4 on-line 24 2848 MHz SPARC-T4 on-line 25 2848 MHz SPARC-T4 on-line 26 2848 MHz SPARC-T4 on-line 27 2848 MHz SPARC-T4 on-line 28 2848 MHz SPARC-T4 on-line 29 2848 MHz SPARC-T4 on-line 30 2848 MHz SPARC-T4 on-line 31 2848 MHz SPARC-T4 on-line ======================= Physical Memory Configuration ======================== ???? # pginfo -p -T 0 (System [system,chip]) CPUs: 0-31 `-- 3 (Data_Pipe_to_memory [system,chip]) CPUs: 0-31 |-- 2 (Floating_Point_Unit [core]) CPUs: 0-7 | `-- 1 (Integer_Pipeline [core]) CPUs: 0-7 |-- 5 (Floating_Point_Unit [core]) CPUs: 8-15 | `-- 4 (Integer_Pipeline [core]) CPUs: 8-15 |-- 7 (Floating_Point_Unit [core]) CPUs: 16-23 | `-- 6 (Integer_Pipeline [core]) CPUs: 16-23 `-- 9 (Floating_Point_Unit [core]) CPUs: 24-31 `-- 8 (Integer_Pipeline [core]) CPUs: 24-31 T4 ????????????????????????????????????????????????? T3 ?????(S2 core)?????T4 ?????(S3 core)?????????????5???????????? T3 ?????(S2 core)?????????????????????????(????????)?????????????????????????????????????????????·???????????????????????????????????????? ????T4 ????????????????????????????T4 ??????????·??????? Netra SPARC T4-1 4core ????????????????????????????????????T3 ???????????????????????????? ?????????Netra SPARC T4-1 ??????????????? Netra SPARC T4-1 ?? Computing 1 x SPARC T4 4?? 32???? or 8 ?? 64 ???? 2.85GHz CPU (1?????8????) 16 x DDR3 DIMM (?? 256GB ?????16GB DIMM ???) I/O and Storage 3 x Low Profile PCI-Express Gen2 ???? (2 x 10Gb Ethernet XAUI ???????) 2 x Full-height Half-length PCI-Express Gen2 ???? 4 x 10/100/1000 Ethernet ???????? 4 x 2.5” SAS2 HDD 4 x USB ??? (?? 2, ?? 2) RAS and Management and Power Supply ???? (RAID????), ????PSU ?????????? ILOM?????????????? 2N (1+1) , AC ???? DC ?? Support OS Oracle Solaris 10 10/9, 9/10, 8/11, Oracle Solaris 11 11/11 Oracle VM Server for SPARC 2.1 (LDoms) ???? ??? NEBS Level3?? ??????21” 19”(EIA-310D),23”,24”,600mm????? ?????(?????)????????? ????SPARC T4 ????????SPARC T4 ?????????????????????????(4???)???????????? Oracle OpenWorld Tokyo 2012 ?3??(4/4(?)?4/5(?)?4/6(?))?????????????????????&?????????????????SPARC T4 ?????????????????????????????????·?????????????????SPARC T4 ???????????????????!? Oracle OpenWorld Tokyo 2012 http://www.oracle.com/openworld/jp-ja/index.html ????·???????????? 4/6(?) Develop D3-13 (14:00 - 14:45) ???????????49 ??? ?????? 7264 ???????????????

  Read the article

• SetupAPI.DLL to HID.DLL

  - by lexdean

  With the SetupAPI.DLL I execute Function SetupDiGetClassDevs and get a pointer or handle Then Begin a loop Then I run Return = Function SetupDiEnumDeviceInterfaces with SP_DEVICE_INTERFACE_DATA.cbSize = 0 to get my size of what SP_DEVICE_INTERFACE_DATA needs to be Then I set size and execute again SP_DEVICE_INTERFACE_DATA.cbSize = return (the size) Function SetupDiEnumDeviceInterfaces From the data structures I get DevicePath from SP_DEVINFO_DATA And a heap of information from the registry if I want it I beleave What I’m realy wanting is to access the HID.DLL and call HidD_GetAttributes to get VendorID, ProductID, and VersionNumber To this Enumerated device, so I can ID the device. I expect this particular info would come from the USB device its self. Can any one show me how to do that. By the way in my version of windows XP I’m using the registry path, I cannot find HKEY_LOCAL_MACHINE\Enum\HID...\Class I do not even get HKEY_LOCAL_MACHINE\Enum\ I think this is because I have not executed the SetupDiEnumDeviceInterfaces Function Why? I find Lake View Research the only data that is in complete And does not cover this subject. Why is it all over the net when its junk???????? Thanks in advance, J Lex Dean.

  Read the article

• How to get friendly device name from DEV_BROADCAST_DEVICEINTERFACE and Device Instance ID

  - by snicker

  I've registered a window with RegisterDeviceNotification and can successfully recieve DEV_BROADCAST_DEVICEINTERFACE messages. However, the dbcc_name field in the returned struct is always empty. The struct I have is defined as such: [StructLayout(LayoutKind.Sequential)] public struct DEV_BROADCAST_DEVICEINTERFACE { public int dbcc_size; public int dbcc_devicetype; public int dbcc_reserved; public Guid dbcc_classguid; [MarshalAs(UnmanagedType.LPStr)] public string dbcc_name; } And I'm using Marshal.PtrToStructure on the LParam of the WM_DEVICECHANGE message. Should this be working? Or even better... Is there an alternative way to get the name of a device upon connection? EDIT (02/05/2010 20:56GMT): I found out how to get the dbcc_name field to populate by doing this: [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Auto)] public struct DEV_BROADCAST_DEVICEINTERFACE { public int dbcc_size; public int dbcc_devicetype; public int dbcc_reserved; public Guid dbcc_classguid; [MarshalAs(UnmanagedType.ByValTStr, SizeConst=255)] public string dbcc_name; } but I still need a way to get a "Friendly" name from what is int dbcc_name. It looks like the following: \?\USB#VID_05AC&PID_1294&MI_00#0#{6bdd1fc6-810f-11d0-bec7-08002be2092f} And I really just want it to say "Apple iPhone" (which is what the device is in this case).

  Read the article

• How To Create Your Own x86 Operating System for Modern PC Computers

  - by mudge

  I'd like to create a new operating system for x86 PC computers. I'd like it to be 64-bit but possibly run as 32-bit as well. I have these kinds of questions: What kinds of things do you start working on first? Knowing where to start in writing your own operating system seems to me to be a tricky subject, so I am interested in your input. Generally how to go about making your own 32-bit/64-bit operating system, or good resources that mention useful information about going about writing your own operating system for x86 computers. I don't care how old sources are as long as they are still relevant and useful to what I am doing. I know that I will want it to have kernel drivers that access peripheral hardware directly. Where should I look for advice and documentation for programming and understanding the interface to peripheral hardware the operating system will communicate with? I will need to understand how the operating system will receive input and interact with keyboards, mice, computer monitors, hard drives, USB, etc. etc. This is probably the area I know least about. I have the Intel instruction set manuals and have been getting more familiar with assembly programming, so the CPU side of things is what I know the most about. At this point I'm thinking that I'd like to implement the Linux system calls within my operating system so that programs that run on Linux can run on my operating system. I want my operating system to use the ELF binary format. I wonder what obstacles I have to overcome to achieve this Linux compatibility. Are the main things implementing the system calls that Linux provides, and using the ELF format? What else? I am also interested in people's thoughts about why it might not be a good idea to make your own operating system, and why it is a good idea to make your own operating system. Thank you for any input.

  Read the article

• Building Cross Platform app - recommendation

  - by Ben

  Hi, I need to build a fairly simple app but it needs to work on both PC and Mac. It also needs to be redistributable on a disc or usb drive as a standalone desktop app. Initially I thought AIR would be perfect for this (it ticks all the API requirements), but the difficulty is making it distributable, as the app would require the AIR runtime to be installed to run. I came across Shu Player as an option as it seems to be able to package the AIR runtime with the app and do a (silent?) install. However this seems to break the T&C from Adobe (as outlined here) so I'm not sure about the legality. Another option could be Zinc but I haven't tested it so I'm not sure how well it'll fit the bill. What would you recommend or suggest I check out? Any suggestion much appreciated EDIT: There's a few more discussions on mono usage (though no real conclusion): Here and Here EDIT2: Titanium could also fit the bill maybe, will check it out. Any more comments from anyone? Ben

  Read the article

• What's this error messages mean?

  - by flybirdtt

  03-20 11:41:28.103: ERROR/vold(550): Error opening switch name path '/sys/class/switch/test2' (No such file or directory) 03-20 11:41:28.103: ERROR/vold(550): Error bootstrapping switch '/sys/class/switch/test2' (m) 03-20 11:41:28.103: ERROR/vold(550): Error opening switch name path '/sys/class/switch/test' (No such file or directory) 03-20 11:41:28.103: ERROR/vold(550): Error bootstrapping switch '/sys/class/switch/test' (m) 03-20 11:41:28.153: ERROR/flash_image(557): can't find recovery partition 03-20 11:41:51.493: ERROR/MemoryHeapBase(585): error opening /dev/pmem: No such file or directory 03-20 11:41:51.503: ERROR/SurfaceFlinger(585): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake 03-20 11:41:51.572: ERROR/GLLogger(585): couldn't load library (Cannot find library) 03-20 11:41:52.144: ERROR/GLLogger(585): couldn't load library (Cannot find library) 03-20 11:41:59.913: ERROR/BatteryService(585): Could not open '/sys/class/power_supply/usb/online' 03-20 11:41:59.923: ERROR/BatteryService(585): Could not open '/sys/class/power_supply/battery/batt_vol' 03-20 11:41:59.943: ERROR/BatteryService(585): Could not open '/sys/class/power_supply/battery/batt_temp' 03-20 11:42:00.532: ERROR/EventHub(585): could not get driver version for /dev/input/mouse0, Not a typewriter 03-20 11:42:00.563: ERROR/EventHub(585): could not get driver version for /dev/input/mice, Not a typewriter 03-20 11:42:00.793: ERROR/System(585): Failure starting core service 03-20 11:42:00.793: ERROR/System(585): java.lang.SecurityException 03-20 11:42:00.793: ERROR/System(585): at android.os.BinderProxy.transact(Native Method) 03-20 11:42:00.793: ERROR/System(585): at android.os.ServiceManagerProxy.addService(ServiceManagerNative.java:146) 03-20 11:42:00.793: ERROR/System(585): at android.os.ServiceManager.addService(ServiceManager.java:72) 03-20 11:42:00.793: ERROR/System(585): at com.android.server.ServerThread.run(SystemServer.java:163) 03-20 11:42:00.823: ERROR/AndroidRuntime(585): Crash logging skipped, no checkin service 03-20 11:42:02.993: ERROR/LockPatternKeyguardView(585): Failed to bind to GLS while checking for account 03-20 11:42:10.204: ERROR/ApplicationContext(585): Couldn't create directory for SharedPreferences file shared_prefs/wallpaper-hints.xml 03-20 11:42:11.539: ERROR/ActivityThread(624): Failed to find provider info for android.server.checkin 03-20 11:42:12.889: ERROR/ActivityThread(624): Failed to find provider info for android.server.checkin 03-20 11:42:13.048: ERROR/ActivityThread(624): Failed to find provider info for android.server.checkin

  Read the article

• Thread resource sharing

  - by David

  I'm struggling with multi-threaded programming... I have an application that talks to an external device via a CAN to USB module. I've got the application talking on the CAN bus just fine, but there is a requirement for the application to transmit a "heartbeat" message every second. This sounds like a perfect time to use threads, so I created a thread that wakes up every second and sends the heartbeat. The problem I'm having is sharing the CAN bus interface. The heartbeat must only be sent when the bus is idle. How do I share the resource? Here is pseudo code showing what I have so far: TMainThread { Init: CanBusApi =new TCanBusApi; MutexMain =CreateMutex( "CanBusApiMutexName" ); HeartbeatThread =new THeartbeatThread( CanBusApi ); Execution: WaitForSingleObject( MutexMain ); CanBusApi->DoSomething(); ReleaseMutex( MutexMain ); } THeartbeatThread( CanBusApi ) { Init: MutexHeart =CreateMutex( "CanBusApiMutexName" ); Execution: Sleep( 1000 ); WaitForSingleObject( MutexHeart ); CanBusApi->DoHeartBeat(); ReleaseMutex( MutexHeart ); } The problem I'm seeing is that when DoHeartBeat is called, it causes the main thread to block while waiting for MutexMain as expected, but DoHeartBeat also stops. DoHeartBeat doesn't complete until after WaitForSingleObject(MutexMain) times out in failure. Does DoHeartBeat execute in the context of the MainThread or HeartBeatThread? It seems to be executing in MainThread. What am I doing wrong? Is there a better way? Thanks, David

  Read the article

• Beginner video capture and processing/Camera selection

  - by mattbauch

  I'll soon be undertaking a research project in real-time event recognition but have no experience with the programming aspect of video capture (I'm an upperclassman undergraduate in computer engineering). I want to start off on the right foot so advice from anyone with experience would be great. The ultimate goal is to track events such as a person standing up/sitting down, entering/leaving a room, possibly even shrugging/slumping in posture, etc. from a security camera-like vantage point. First of all, which cameras/companies would you recommend? I'm looking to spend ~$100, more if necessary but not much. Great resolution isn't a must, but is desirable if affordable. What about IP network cameras vs. a USB type webcam? Webcams are less expensive, but IP cameras seem like they'd be much less work to deal with in software. What features should I look for in the camera? Once I've selected a camera, what does converting its output to a series of RGB bitmaps entail? I've never dealt with video encoding/decoding so a starting point or a tutorial that will guide me up to this point would be great if anyone has suggestions. Finally, what is the best (least complicated/most efficient) way to display video from the camera plus my own superimposed images (boxes around events in progress, for instance) in a GUI application? I can work on any operating system in any language. I have some experience with win32 GUIs and Java GUIs. The focus of the project is on the algorithm and so I'm trying to get the video capture/display portion of the app done cleanly and quickly. Thanks for any responses!!

  Read the article

• Python libusb pyusb "mach-o, but wrong architecture"

  - by Jon

  I am having some trouble with the pyusb module. I have narrowed down the problem to a single line, and have created a small example script to replicate the error. #!/usr/bin/env python """ This module was created to isolate the problem in the pyusb package. Operating system: Mac OS 10.6.3 Python Version: 2.6.4 libusb 1.0.8 has been successfully installed using: sudo port install libusb I have also tried modifying /opt/local/etc/macports/macports.conf to force the i386 architecture instead of x86_64. """ from ctypes import * import ctypes.util libname = ctypes.util.find_library('usb-1.0') print 'libname: ', libname l = CDLL(libname, RTLD_GLOBAL) # RESULT: #libname: /usr/local/lib/libusb-1.0.dylib #Traceback (most recent call last): # File "./pyusb_problem.py", line 7, in <module> # l = CDLL(libname, RTLD_GLOBAL) # File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/ctypes/__init__.py", line 353, in __init__ # self._handle = _dlopen(self._name, mode) #OSError: dlopen(/usr/local/lib/libusb-1.0.dylib, 10): no suitable image found. Did find: # /usr/local/lib/libusb-1.0.dylib: mach-o, but wrong architecture # End of File This same script runs on Ubuntu 10.04 successfully. I have tried building the libusb module (directly from source AND through macports) for 32-bit (i386) instead of x86_64 (default for OS 10.6), but I receive the same error. Thank-you in advance for your help!

  Read the article

• General question about DirectShow.NET, DirectShow and Windows Media Format

  - by Paul Andrews

  I searched and googled for an answer but couldn't find one. Basically I'm developing a webcam/audio streaming application which should capture audio and video from a pc (usb webcam/microphone) and send them to a receiving server. What the server will do with that it's another story and phase two (which I'm skipping for now) I wrote some code using DirectShow and Windows Media Format and it worked great for capture audio/video and sending them to another client, but there's a major problem: latency. Everywhere in the internet everyone gave me the same answer: "sorry dude but media format isn't for video conferencing, their codecs have too high latency". I thought I could skip the .wmv problems but seems like it's not possible to do... this road ends here then. So I saw a few examples with DirectShow.NET which were faster for both audio and video.. my question is: how come that DirectShow.NET is faster and better for video/audio conferencing? Shouldn't it be just a .NET porting of C++'s DirectShow? Am I missing something? I'm a bit confused at this point

  Read the article

• Proper way to cleanup dynamic engines and can they be loaded twice?

  - by Becky

  Hello - I am having problems loading Engine PKCS #11 as a dynamic engine using python and M2Crypto. I am trying to access an Aladdin USB eToken. Here are the important steps from my python code: dynamic = Engine.load_dynamic_engine("pkcs11", "/usr/local/ssl/lib/engines/engine_pkcs11.so") pkcs11 = Engine.Engine("pkcs11") pkcs11.ctrl_cmd_string("MODULE_PATH", "/usr/lib/libeTPkcs11.so") pkcs11.engine_init_custom() # initialize engine with custom M2Crypto patch # next few steps which I deleted pass password and grab key & cert off token Engine.cleanup() This works fine the first time this method gets run. The second time, it fails when loading the dynamic engine (see error below). Traceback (most recent call last): File "", line 1, in ? File "/usr/local/lib/python2.4/site-packages/M2Crypto/Engine.py", line 98, in load_dynamic_engine e.ctrl_cmd_string("LOAD", None) File "/usr/local/lib/python2.4/site-packages/M2Crypto/Engine.py", line 38, in ctrl_cmd_string raise EngineError(Err.get_error()) M2Crypto.Engine.EngineError: 4002:error:260B606D:engine routines:DYNAMIC_LOAD:init failed:eng_dyn.c:521: Is it impossible to load engines twice in a python session? Am I missing some kind of engine cleanup/deletion? The OpenSSL docs talk about engine_finish() but I don't think M2Crypto offers that. Is there a method to tell if the engine is already loaded? Thanks!

  Read the article

• Android & SQLite: "Table audios has no column named downloaded"

  - by Erik

  I get this weird exception when i run my app on both the emulator and a USB connected device. i can see the table inside the shell, but when I try to insert a record from the Activity acton I get this exception: android.database.sqlite.SQLiteException: table audios has no column named downloaded I am mostly running on an emulator with Android 1.5. The predominant part of my code is linked to this tutorial - http://www.devx.com/wireless/Article/40842/1954. This is the create statement I use: private static final String DATABASE_CREATE = "create table audios ( _id integer primary key autoincrement, " + "user_name text not null, title text not null, file_path text not null, download integer not null, " + "created_at integer not null, downloaded_at integer not null );"; This is the insert code I use: //--- insert a title into the database --- public long insertTitle(String user_name, String title, String file_path, Integer downloaded, long created_at, String downloaded_at ) { ContentValues initialValues = new ContentValues(); initialValues.put(KEY_USER_NAME, user_name); initialValues.put(KEY_TITLE, title); initialValues.put(KEY_FILE, file_path); initialValues.put(KEY_DOWNLOADED, downloaded); initialValues.put(KEY_CREATED_AT, created_at); initialValues.put(KEY_DOWNLOADED_AT, downloaded_at); return db.insert(DATABASE_TABLE, null, initialValues); }

  Read the article

• C# .Net Serial DataReceived Event response too slow for high-rate data.

  - by Matthew

  Hi, I have set up a SerialDataReceivedEventHandler, with a forms based program in VS2008 express. My serial port is set up as follows: 115200, 8N1 Dtr and Rts enabled ReceivedBytesThreshold = 1 I have a device I am interfacing with over a BlueTooth, USB to Serial. Hyper terminal receives the data just fine at any data rate. The data is sent regularly in 22 byte long packets. This device has an adjustable rate at which data is sent. At low data rates, 10-20Hz, the code below works great, no problems. However, when I increase the data rate past 25Hz, there starts to recieve mulitple packets on one call. What I mean by this is that there should be a event trigger for every incoming packet. With higher output rates, I have tested the buffer size (BytesToRead command) immediatly when the event is called and there are multiple packets in the buffer then. I think that the event fires slowly and by the time it reaches the code, more packes have hit the buffer. One test I do is see how many time the event is trigger per second. At 10Hz, I get 10 event triggers, awesome. At 100Hz, I get something like 40 event triggers, not good. My goal for data rate is 100HZ is acceptable, 200Hz preferred, and 300Hz optimum. This should work because even at 300Hz, that is only 52800bps, less than half of the set 115200 baud rate. Anything I am over looking? public Form1() { InitializeComponent(); serialPort1.DataReceived += new SerialDataReceivedEventHandler(serialPort1_DataReceived); } private void serialPort1_DataReceived(object sender, SerialDataReceivedEventArgs e) { this.Invoke(new EventHandler(Display_Results)); } private void Display_Results(object s, EventArgs e) { serialPort1.Read(IMU, 0, serial_Port1.BytesToRead); }

  Read the article

• Why is WMDC/ActiveSync so flaky?

  - by Ira Rainey

  I'm developing a Windows Mobile app using the .NET Compact Framework 3.5 and VS2008, and for debugging using the Device Emulator V3, on Win7, and seem to have constant problems with Windows Mobile Device Centre (6.1) connecting. Using the Emulator Manager (9.0.21022.8) I cradle the device using DMA in WMDC. The problem is it's so flaky at actually connecting that it's becoming a pain. I find that when I turn my computer on, before I can get it to connect I have to open up WMDC, disable Connect over DMA, close WMDC down, reopen it again, and then it might cradle. Often I have to do this twice before it will cradle. Once it's cradled it's generally fine, but nothing seems consistent in getting it to connect. Connecting with physical devices is often better, although not always. If I plug a PDA into a USB socket other than the one it was originally plugged into then it won't connect at all. Often the best/most reliable connection method seems to be over Bluetooth, but that's quite slow. Anybody got any tips or advice?

  Read the article

• Looking for Hardware that will easily interface with my .NET code.

  - by SkippyFire

  I'm a .NET C# developer looking to do some hardware interfacing/programming. I just want something super simple to mess around with. I have done one of those basic stamp projects, but I want something with less electrical work. A self-contained piece of hardware would be fine. I'm not really looking to do embedded programming... but that would actually be pretty cool if something was capable of running .net code. I'm looking for something that would be easy to connect, hopefully via USB. Serial ports seems to be more hit or miss nowadays with laptops and netbooks. Something I can easily send data to, like a mini LCD, or series of LED's. Better yet would be something that provides feedback, like a temperature sensor. The best would be something more featured that I could talk to. I would be able to send data to it, and it would send back responses. Maybe something like a servo that could report it's position? Or maybe something that I could set parameters on? Any ideas? Thanks in advance!

  Read the article

• Keyboard hook return different symbols from card reader depends whther my app in focus or not

  - by user363868

  I code WinForm application where one of the input is magnetic stripe card reader (CR). I am using code George Mamaladze's article Processing Global Mouse and Keyboard Hooks in C# on codeproject.com to listen keyboard (USB card reader acts same way as keyboard) and I have weird situation. One card reader CR1 (Unitech MS240-2UG) produces keystroke which I intercept on KeyPress event analyze that I intercept certain patter like %ABCD-6EFJHI? and trigger some logic. Analysis required because user can type something else into application or in another application meanwhile my app is open When I use another card reader CR2 (IdTech IDBM-334133) keystroke intercepted by hook started from number 5 instead of % (It is actually same key on keyboard). Since it is starting sentinel it is very important for me to have ability recognize input from card reader. Moreover if my app running in background and I have focus on Notepad when I swipe card string %ABCD-6EFJHI? appears in Notepad and same way, with proper starting character) intercepted by keyboard hook. If swiped when focus on Form it is 5ABCD-6EFJHI? User who tried app with another card reader has same result as me with CR2. Only CR1 works for me as expected I was looking into Device manager of Windows and both devices use same HID driver supplied by MS. I checked devices though respective software from CR makers and starting and ending sentinels set to % and ? respective on both. I would appreciate and ideas and thoughts as I hit the wall myself Thank you

  Read the article

• Programmatically talking to a Serial Port in OS X or Linux

  - by deadprogrammer

  I have a Prolite LED sign that I like to set up to show scrolling search queries from a apache logs and other fun statistics. The problem is, my G5 does not have a serial port, so I have to use a usb to serial dongle. It shows up as /dev/cu.usbserial and /dev/tty.usbserial . When i do this everything seems to be hunky-dory: stty -f /dev/cu.usbserial speed 9600 baud; lflags: -icanon -isig -iexten -echo iflags: -icrnl -ixon -ixany -imaxbel -brkint oflags: -opost -onlcr -oxtabs cflags: cs8 -parenb Everything also works when I use the serial port tool to talk to it. If I run this piece of code while the above mentioned serial port tool, everthing also works. But as soon as I disconnect the tool the connection gets lost. #!/usr/bin/python import serial ser = serial.Serial('/dev/cu.usbserial', 9600, timeout=10) ser.write("<ID01><PA> \r\n") read_chars = ser.read(20) print read_chars ser.close() So the question is, what magicks do I need to perform to start talking to the serial port without the serial port tool? Is that a permissions problem? Also, what's the difference between /dev/cu.usbserial and /dev/tty.usbserial?

  Read the article

< Previous Page | 523 524 525 526 527 528 529 530 531 532 533 534  | Next Page >