Search Results

Search found 33247 results on 1330 pages for 'anonymous access'.

Page 528/1330 | < Previous Page | 524 525 526 527 528 529 530 531 532 533 534 535  | Next Page >

• Family server setup [closed]

  - by Manny

  Hi all, I really hope some of you can give me some direction. I have setup a linux server at home and through samba I can access files from different computers in my home. I would like to use this server as a file-server for my family (brothers, sisters and parents who all live in their own homes). I really like the way it is set up right now with user and permission controls, but I've read that it is bad idea to open up the samba port to the world. The requirements are simple: 1) it should be easy to access, by using standard web browsers or mounting the drive (shouldn't have to use any VPN setup or use putty etc) 2) should be somewhat secure. We just want to share family pictures instead of putting them on facebook or picasa or other web server, nothing top secret. Here is what I've looked into: 1)Webdav. It seems decent but seems like it windows7 doesn't like it very much, even with digest mode authentication. User controls and permissions are not as flexible as samba (or at least to my knowledge). I really like the user and group permissions in samba, but if I could live with webdav if it worked seamlessly with windows, it should just work shouldn't it? 2) I read somewhere to stay away from ftp as it is outdated and that there are newer and better internet file-server setups? Was that a reference to webdav? I am so confused, please help... Manny

  Read the article

• Family server setup

  - by Manny

  Hi all, I really hope some of you can give me some direction. I have setup a linux server at home and through samba I can access files from different computers in my home. I would like to use this server as a file-server for my family (brothers, sisters and parents who all live in their own homes). I really like the way it is set up right now with user and permission controls, but I've read that it is bad idea to open up the samba port to the world. The requirements are simple: 1) it should be easy to access, by using standard web browsers or mounting the drive (shouldn't have to use any VPN setup or use putty etc) 2) should be somewhat secure. We just want to share family pictures instead of putting them on facebook or picasa or other web server, nothing top secret. Here is what I've looked into: 1)Webdav. It seems decent but seems like it windows7 doesn't like it very much, even with digest mode authentication. User controls and permissions are not as flexible as samba (or at least to my knowledge). I really like the user and group permissions in samba, but if I could live with webdav if it worked seamlessly with windows, it should just work shouldn't it? 2) I read somewhere to stay away from ftp as it is outdated and that there are newer and better internet file-server setups? Was that a reference to webdav? I am so confused, please help... Manny

  Read the article

• Host Name Resolution - ISA 2006 - VPN PPTP

  - by Brian Lee Jackson

  We are running an ISA 2006 server and PPTP VPN connection works fine. Clients are able to connect to internet, access Outlook, CRM, etc. The problem we are encountering is that host name resolution is not working. Example, when connected via VPN I can’t ping any box other than the VPN server by the host name. Nslookup also fails. I can ping everything fine via IP address. But for clients, they need to be able to access their “mapped” drives over the VPN which all are mapped by host name. I recently took over this position and it sounds like this used to work. What would be the best place to check first? I haven’t had much exposure to ISA and have been reading up a bit on installation procedures, etc. DNS is hosted and running on our domain controller, as well as WINS. It isn’t on the ISA box. Is there a firewall policy that perhaps got removed? What usually is required for host name resolution to pass through. Any help would be appreciated, thanks!

  Read the article

• Apache mod_proxy

  - by mhouston100

  Uggh, I'm spewing that I can't figure this out, I'm so frustrated: <VirtualHost *:80> servername domain1.com.au ServerAdmin webmaster@localhost DocumentRoot /var/www/html ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined <Proxy *> Order Allow,Deny Allow from all </Proxy> RewriteEngine on ReWriteCond %{SERVER_PORT} !^443$ RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L] </VirtualHost> <VirtualHost *:443> servername domain1.com.au SSLEngine on SSLCertificateFile /etc/apache2/ssl/owncloud.pem SSLCertificateKeyFile /etc/apache2/ssl/owncloud.key DocumentRoot /var/www/html </VirtualHost> <VirtualHost *:*> Servername domain2.com.au ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / https://192.168.1.12/ ProxyPassReverse / https://192.168.1.12/ </VirtualHost> Not sure if it's clear what I'm trying to do, but I've read and read and READ, I still can't figure it out. Basically I have a working Apache server with a rewrite to force HTTPS, as seen in the first two VirtualHost entries. I now have a webmail service I set up on another server, under another domain name, however I only have one incoming public IP address. So I'm trying to have any incoming requests for the second domain to be proxied to the other server to access the webmail, whether its port 80 or 443. IMAP and POP3 are no problems, I can just forward the ports directly to the correct server. The results of the above configuration is that requests to domain2.com.au (port 80 or 443) are forwarded to https://domain1.com.au. Am I headed in the right direction?

  Read the article

• Can Spotlight or Media Browser index metadata contained in iPhoto or Aperture in Mac OS X?

  - by jaydles

  It seems silly to go to all the trouble to assign "Face" data to thousands of photos, but not make it possible to use that data to locate them outside of that application. Is there any way to get Spotlight or Media Browser in OSX (Snow Leopard) to index and recognize metadata (Faces, Places, etc.) contained in iPhoto or Aperture? I know that that metadata is stored in the "library" database for Aperture/iphoto, rather than on the actual files (which is too bad). And I can even potentially see why it might create challenges for spotlight to use it, since spotlight is presumably a file index system, not a media organizer, but surely the media browser used across the other OSX apps is intended to use it? The media browser's whole purpose seems to be to let you easily locate and reference the items you organize in one of the ilife apps (iphoto or Aperture, in this case) from the others (say, imovie, or Mail). It's particularly vexing since the photo app on the iphone sorts by faces by default. Additionally, the mac-based media browser does access smart albums and folders, so you could establish a workaround by creating a smart album for each "face" or place, or tag, and access them that way, but it seems like there must be an easier way. Am I missing something?

  Read the article

• nginx proxying different servers for different subdomains

  - by The.Anti.9

  i just set up an nginx server. On the same computer as nginx, I have apache running on port 8000 (this was previously set up.) and I want no subdomain and the www. subdomain to go to the local apache instance. But i want the stuff. subdomain to link to my server where i keep all my miscellaneous files (pictures, documents, etc.), which is also listening on port 80 at the ip 192.168.1.102. I tried configuring it, but when i go to my domain, I just get the "Welcome to nginx!". Here's what I have: user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; include /etc/nginx/conf.d/*.conf; server { listen 80; server_name theanti9.com www.theanti9.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://localhost:8000; } } server { listen 80; server_name stuff.theanti9.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://192.168.1.102:80; } } } I'm not really sure what's wrong. Any suggestions?

  Read the article

• Apache2 403 permission denied on Ubuntu 12.04

  - by skeniver

  I have a sub-directory in my /var/www folder called prod, which is password protected. It was all working fine until I asked my server admin to help me set up allow all access to one particular file. Now the entire folder is just giving me a 403 error. This is the sites-enabled file: <VirtualHost *:80> ServerAdmin [email protected] # Server name ServerName prod.xxx.co.uk DocumentRoot /var/www/prod <Directory /var/www/prod> Options Indexes FollowSymLinks MultiViews +ExecCGI Includes AllowOverride None Order allow,deny AuthType Basic AuthName "Please log in" AuthUserFile /home/ubuntu/.htpasswd Require valid-user </Directory> <Directory /var/www/prod/xxx/cgi-bin/api.pl> Allow from All Satisfy Any </Directory> ScriptAlias /xxx/cgi-bin/ /var/www/prod/xxx/cgi-bin/ ErrorLog ${APACHE_LOG_DIR}/prod.xxx.error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/prod.xxx.access.log combined </VirtualHost> Now he's unsure why this is blocking me out completely. No permissions have been changed, but this is the /var/www/ folder: 4 drwxr-xr-x 2 root root 4096 Jan 3 21:10 images 4 drwxr-sr-x 4 root www-data 4096 Mar 31 14:47 jslib 4 drwxr-xr-x 7 root root 4096 Jun 2 13:00 prod When I try to visit http://prod.xxx.co.uk, I don't get asked for the password; I just get 403'd I hope I've given enough information... Anyone able to spot something he can't?

  Read the article

• proftpd initial directory for each user

  - by Dels

  After successfully setting up proftpd server, i want to add initial directory for each users, i have 2 user, webadmin that can access all folder and upload that can only access upload folder ... # Added config DefaultRoot ~ RequireValidShell off AuthUserFile /etc/proftpd/passwd # VALID LOGINS <Limit LOGIN> AllowUser webadmin, upload DenyALL </Limit> <Directory /home/webadmin> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser webadmin </Limit> </Directory> <Directory /home/webadmin/upload> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser upload </Limit> </Directory> All set ok, but i need to tell my ftp client initial directory for each user (otherwise it keep fail to retrieve directory), which i think it should be automatically set for each user (no need to type initial directory in ftp client)

  Read the article

• How do I change file protections running XP on a disk from Windows Server?

  - by cdkMoose

  I had a Windows Server 2003 machine running at home, along with my desktop which I use for development. Server went belly up, but since my desktop is reasonably powerful, I figured I would move the disk from the file server (it was OK) into my XP machine to keep all of the files. Disk comes up fine and shows all of the files. I have been getting access denied errors when trying to work with some of the files. When I display attributes in Explorer, none of them are marked Read-Only. When I view properties on the directories, the Read-Only checkbox is not checked, but has a green background(which I thought meant mixed usage for files in the directory). When I click on the checkbox to clear it and click Apply, the disk does some work and all looks well. However, I continue to get the Access Denied errors, the files still don't show any Read-Only attribute and the directory properties shows the green background again on the Read-Only checkbox. I did check the box which says to apply the change to the folder and all files /subfilders under it. I am assuming that the issue relates to userids/permissions carried over from the Server install. So, why does it let me think I can change the attribute when I can't and how can I correct this problem so that the disk correctly recognizes the ids from XP?

  Read the article

• SSH Connection Error : No route to host

  - by dewbot

  There are three machines in this scenario: Desktop A : [email protected] Laptop A : [email protected] Machine B : [email protected] All the machines have Ubuntu 11.04 (Desktop A is a 64bit one) and have both openssh-server and openssh-client. Now when I try to connect Desktop A to Laptop A or vice-versa by ssh [email protected] I get an error as port 22: No route to host in both the cases. I own both the machines, now if I try same commands from my friend's machine, i.e. via Desktop B, I can access both my Laptop and Desktop. But if I try to access Desktop B from my Laptop or by Desktop I get port 22: Connection timed out I even tried changing ssh port no. in ssh_config file but no success. Note: that 'Laptop A' uses WiFi connection while 'Machine A' uses Ethernet Connection and 'Machine B' is on an entirely different network. Laptop A && Desktop A - Router/Nano_Rcvr provided to me by ISP. So to one Router two Machines are connected and can be accessed at the same time. here is my ifconfig output for both the machines :- Laptop wlan0 Link encap:Ethernet HWaddr X:X:X:X:00:bc inet addr:1.23.73.111 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::219:e3ff:fe04:bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:108409 errors:0 dropped:0 overruns:0 frame:0 TX packets:82523 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44974080 (44.9 MB) TX bytes:22973031 (22.9 MB) Desktop eth0 Link encap:Ethernet HWaddr X:X:X:X:c5:78 inet addr:1.23.68.209 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::227:eff:fe04:c578/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10380 errors:0 dropped:0 overruns:0 frame:0 TX packets:4509 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1790366 (1.7 MB) TX bytes:852877 (852.8 KB) Interrupt:43 Base address:0x2000

  Read the article

• Linux security: The dangers of executing malignant code as a standard user

  - by AndreasT

  Slipping some (non-root) user a piece of malignant code that he or she executes might be considered as one of the highest security breaches possible. (The only higher I can see is actually accessing the root user) What can an attacker effectively do when he/she gets a standard, (let's say a normal Ubuntu user) to execute code? Where would an attacker go from there? What would that piece of code do? Let's say that the user is not stupid enough to be lured into entering the root/sudo password into a form/program she doesn't know. Only software from trusted sources is installed. The way I see it there is not really much one could do, is there? Addition: I partially ask this because I am thinking of granting some people shell (non-root) access to my server. They should be able to have normal access to programs. I want them to be able to compile programs with gcc. So there will definitely be arbitrary code run in user-space...

  Read the article

• Clustered MSDTC

  - by niel

  Hi I'm setting up a SQL cluster (SQL 2008), Windows 2008 R2. I enable the network access on local dtc and then create a DTC resource in my cluster . the problem is that when i start up the resource it does nto pull through my settings to enable network access. the log shows this: MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1): Allow Remote Administrator = 0, Network Clients = 0, Trasaction Manager Communication: Allow Inbound Transactions = 0, Allow Outbound Transactions = 0, Transaction Internet Protocol (TIP) = 0, Enable XA Transactions = 0, Enable SNA LU 6.2 Transactions = 1, MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService, Firewall Exclusion Detected = 0 Transaction Bridge Installed = 0 Filtering Duplicate Events = 1 where when i restart the local dtc service it says this: Security Configuration (OFF = 0 and ON = 1): Allow Remote Administrator = 0, Network Clients = 1, Trasaction Manager Communication: Allow Inbound Transactions = 1, Allow Outbound Transactions = 1, Transaction Internet Protocol (TIP) = 0, Enable XA Transactions = 1, Enable SNA LU 6.2 Transactions = 1, MSDTC Communications Security = No Authentication Required, Account = NT AUTHORITY\NetworkService, Firewall Exclusion Detected = 0 Transaction Bridge Installed = 0 Filtering Duplicate Events = 1 settings on both nodes in teh cluster is the same. I have reinstalled and restarted to many times to mention. Any ideas ?

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

  Read the article

• Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

  - by Biohazard

  I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

  Read the article

• How can I create a VLAN on my extreme switch for a seperate subnet/domain?

  - by drpcken

  I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

  Read the article

• Restoring a fresh home folder in a shared user domain environment

  - by Cocoabean

  I am using a tool called pGINA that adds another credential provider to my Windows 7 clients so we can authenticate campus users via campus LDAP. We have the default Windows credential providers setup to authenticate off of our Active Directory, but we have students in our classes that don't have entries in our AD, and we need to know who they are to allow them internet access. Once these LDAP users login using pGINA, they are all redirected to the same AD account, a 'kiosk' account with GPOs in place to prevent anything malicious. My concern is that my users will accidentally save personal login information or files in that shared profile, and another user may login later and have access to a previous user's Gmail account, as the AppData folder on each computer is shared by anyone logging into the kiosk user. I've looked into MS's 'roll-your-own' SteadyState but it didn't seem to have what I wanted. I tried to write a PS script to copy a pre-saved clean version of the profile from a network share, but I just kept running into issues with CredSSP delegation and accessing the share from the UNC path. Others have recommended something like DeepFreeze but I'd like to do it without 3rd party tools if possible.

  Read the article

• Change source address based on destination IP

  - by hgj

  We have several "router" machines that gather a lot of external IP addresses on the same host and redirect, NAT or proxy the traffic to the internal network. They also act as routers for the machines on the internal network. This works fine, however I am unable to make the routing table, so I can change the source address, based on the destination a machine from the internal network want to access. Let's say I have a router, that has public addresses P1 (5.5.5.1/24) and P2 (5.5.5.2/24). All traffic goes through P1, but if necessary, the host is reachable on P2 too. This looks like this and works fine: > ip addr ... 1: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether aa:bb:cc:dd:ee:11 brd ff:ff:ff:ff:ff:ff inet 5.5.5.1/24 brd 5.5.5.255 scope global eth1 inet 5.5.5.2/24 brd 5.5.5.255 scope global secondary eth1:p2 ... Now I want to use P2 as the source address, if I want to access the Google DNS service for example (8.8.8.8). So I add a row in the routing table like: > ip route add 8.8.8.8 via 5.5.5.254 dev eth1 src 5.5.5.2 > ip route ... default via 5.5.5.254 dev eth1 5.5.5.0/24 dev eth1 proto kernel scope link src 5.5.5.1 8.8.8.8 via 5.5.5.254 dev eth1 src 5.5.5.2 ... But this does not work. If I ping 8.8.8.8, the host still uses P1 as the source address, and does not use P2 at all for outgoing connections. Am I doing it right? I guess not...

  Read the article

• Can not open ports in iptables on CentOS 5??

  - by abszero

  I am trying to open up ports in CentOS's firewall and am having a terrible go at it. I have followed the "HowTo" here: http://wiki.centos.org/HowTos/Network/IPTables as well as a few other places on the Net but I still can't get the bloody thing to work. Basically I wanted to get two things working: VNC and Apache over the internal network. The problem is that the firewall is blocking all attempts to connect to these services. Now if I issue service iptables stop and then try to access the server via VNC or hit the webserver everything works as expected. However the moment I turn iptables back on all of my access is blocked. Below is a truncated version of my iptables file as it appears in vi -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5801 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5901 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 6001 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5900 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT Really I would just be happy if I could get port 80 opened up for Apache since I can do most stuff via putty but if I could figure out VNC as well that would be cool. As far as VNC goes there is just a single/user desktop that I am trying to connect to via: [ipaddress]:1 Any help would be greatly appreciated!

  Read the article

• What can I do with a home server?

  - by Joel Coehoorn

  I have an old 700 Mhz Pentium III at home running Windows 2000 Server, with a home router set up to pass incoming requests to it and a DynDNS account set up so it's easy to find. Right now I'm using it for a number of things: Shared folders + backup inside the home network Shared Printer inside the home network Domain Controller, just because I feel like it and because it's useful to me as practice to keep those "enterprise" administration skills. Web Server FTP remote access for my files. I abandoned this for security reasons, but it's still worth leaving visible. Remote Desktop in to the home network (thinking about adding VPN service) SVN repository MySQL - Will be moving to SQL Server 2008 Standard soon. After I upgrade my wife's laptop from home to pro later this year it will also become a domain controller It's the only place I still have access to Internet Explorer 6 any more without setting up a new virtual machine, so I use it for testing code with that browser. The question is: What else could I be doing with this machine? Update Additional ideas based on the suggestions: Media Server/DVR Build server PBX SSH Proxy Server Continuous Integration Server Personal OpenID Provider Update2 Just a note that this server was recently upgraded to an Atom330 with 2 GB ram and bigger hard drive. For all that's slow for a "modern" cpu, it should still be much faster than the old Pentium III and the expected power savings should make the upgrade essentially free over the course of the next year or two. Also, it's now running Windows Server 2008.

  Read the article

• FreeBSD jail IMAP/MTA config recommendations

  - by kobame

  I've got access to my "own" FreeBSD jail. The jail has only basic, unconfigured system, but I have full access to FreeBSD ports, and (jail)root too. Now I need to setup my jail as IMAP/MTA. The question: What packages are EASIEST for config and later administration, (the simplest possible setup, with the minimum needed configuration) when: i haven't any preferences (don't know any yet) my (one) domain is managed by ISP, so don't need DNS need only IMAP for few users (up to 20 mailboxes) need secure transport layer (IMAPS/993) password auth, no LDAP, no kerberos, nor databases, nothing like fancy things... need easy-setup easy-admin MTA, with simplest possible password SMTP auth, (again no LDAP, nor DB), secure transport layer but would be nice have virus-scan and some anti-spam protection So, what ports I should install for MTA and IMAP? MTA (Sendmail, Postfix, Exim)? antivirus (ClamAV) antispam??? IMAP(S), (Dovecot, Courier) when the main criteria are: easy setup, and easy administration. When I googled I found only complicated setups for thousands of users with LDAP, databases and so on - too big-caliber for my small (easy?) needs. Any pointer to an easy howto is very welcomed.

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• How do I cancel windows server 2003 repair install?

  - by Kilgore2k

  System: Windows 2003 Server Enterprise Scenario: NTDS db is corrupt and all attempts to fix with esentutl fail. Ran chkdsk which seemed to repair disk error and give access to the ntds.dit file but still esentutl fails. (Attached the drive to a different server to run the esentutl) Error: Access to source database '[path to copy of]/ntds.dit' failed with Jet error -1022. Operation terminated with error -1022 (JET_errDiskIO, Disk IO error) after 0.170 seconds. This error occurs on any disk I cpoy the files to including original location in C:\WINDOWS\NTDS\ Now enter the "Stupid!" and "what was I thinking!?" part (must be the late hour...) Stupid: No updated backup - after using a backup I get a network password error in the lsass error. what was I thinking!?: Started the install repair from the original CD but the install fails since the AD fails to start. Now I cant boot into any mode (safe mode, AD restore etc) nor complete the repair install. I would really like to avoid a fresh install since I have the Exchange server on this DC and would rather migrate to a new server than have to start from scratch. Thanks!

  Read the article

• ability to see free/busy detail information for conference rooms in Outlook 2007 and Microsoft hosted Exchange solution

  - by Malav

  recently my company migrated from an in-house Exchange server to the Microsoft hosted exchange online solution. My client is Outlook 2007. Before the migration, I could see the details of the meetings when I hovered on the busy blue bar for a resource such as a conference room. I could click on the meetings and see the invite list and the contents of the meeting. Ofcourse if the meeting was marked as private I could not. however after the migration to the online solution, I cannot see the detailed information. I can still see if the room is busy or not but I can no longer see the details of that meeting. The IT folks can see the information and they claim that they can see it because they have full admin rights. It is their claim that in the hosted Exchange solution you can either have full access (admin access) and see the details or not see anything but just that the room is busy. there is no middle ground such as being able to see the details of the meeting but not having any admin rights. For some reason I believe this to be not true. Can someone please verify my doubts and inform me of what needs to be done to see that information if my IT folks are wrong? thanks

  Read the article

• How to setup Joomla CMS as a backend for iPhone app

  - by srik

  I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

  Read the article

• How to setup Joomla CMS as a backend for iPhone app

  - by srik

  I would like my iPhone app to get dynamic content off the net. This content should be managed using a CMS. I have gone ahead and installed Joomla on my server and will be using the Joomla web interface to create and manage content. I would now like the iPhone app to login to my server and fetch the content. I do not want the complete web pages for my iPhone app. Instead, I want the content in the form of XML or JSON or some serialized format so that I can use the data in a custom layout native to the app. So I am looking for 2 things in particular: 1. How to setup HTTP based authentication for my iPhone app to access data from my server. 2. How to access the content in a serialized format (XML, JSON etc) Are there plugins/extensions/components I can use to achieve the same. Any advice on how this can be achieved would be helpful. I am completely new to setting up/using CMS.

  Read the article

< Previous Page | 524 525 526 527 528 529 530 531 532 533 534 535  | Next Page >