Search Results

Search found 69890 results on 2796 pages for 'ip help'.

Page 529/2796 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

  • multicast tcpdump and subscriptions

    - by Karoly Horvath
    From the multicast howto: IP_ADD_MEMBERSHIP. Recall that you need to tell the kernel which multicast groups you are interested in. If no process is interested in a group, packets destined to it that arrive to the host are discarded. If you don't do that, you won't see those packets with tcpdump. Is it possible to subscribe to all multicast traffic so I can do a tcpdump for all existing traffic? I would think IGMP doesn't allow this, so probably not.. but maybe you can configure a switch to still send all multicast traffic. Is that possible? Is it possible to do subscription (for a specific IP) with a command line tool? (note: I know how to do this in C.. but would prefer to use an existing tool and not compile a separate program for this)

    Read the article

  • Sony eBook Library for Mac No Longer Displays Its Window

    - by Kristopher Johnson
    I got a Sony PRS-505 reader a few weeks ago, and the Sony eBook Library 3.0 software worked fine on my Mac, until today. Now, when I launch it, the menu bar is displayed, but there is no application window and the menu items have no effect. I've reinstalled the software, but that didn't help. I've deleted ~/Library/Preferences/Sony Corporation, but that didn't help. I suppose I could start using Calibre exclusively, except it would make it difficult to buy books from Sony's ebookstore. Any ideas?

    Read the article

  • Can't access a local site site on LAN

    - by Dilawar
    I have lighttpd setup on a machine (say ip is 10.107.105.13) with following details. inet addr : 10.107.105.13 Bcast : 10.107.111.255 Mask : 255.255.240.0 I can access my site on this computer by using firefox http://localhost/index.html. Now I am trying to access this site from another computer with following details inet addr : 10.14.42.7 Bcast : 10.14.42.255 Mask : 255.255.255.0 But it says 'access denied'. nmap 10.107.105.13 gives the following output. PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 1234/tcp open hotline 3306/tcp open mysql 9418/tcp open git Following is the output of iptables -L -n -v on 10.107.105.13 141 11207 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 FORWARD and OUTPUT section empty. What is wrong with all this?

    Read the article

  • Rogue program disabled access to Firefox's "Get add-ons" and "Extensions". How can I get them back?

    - by Eric
    After installing a program called "FreeFileViewer", the program disabled access to Firefox's "Get add-ons" and "Extensions" options. To make matters worse, it installed the Yahoo! toolbar that I now can't remove (because it disabled Firefox's options to do so). Please help. Any advice you can give me to restore these Firefox options would be greatly appreciated! BTW, I am running Firefox 15.0.1 on a Windows 7 machine. Thanks, in advance, for your help! -- Eric

    Read the article

  • Router stopping my python server

    - by drfrev
    This was originally posted in stackoverflow.com but it was suggested I move it here after it was realized it wasn't my code that was wrong. So my problem, very simply, is that I cannot get my computers that are connected to my router to communicate. example: If I ping a wireless computer I get no responce and the Request times out If I ping a computer wired to the modem directly it works fine. When I ping I use the local ip for each case. *if it helps my original post is here: http://stackoverflow.com/questions/12593024/python-cannot-go-over-internet-network/12593361#12593361 And some screen shots of different things are here: http://imgur.com/a/jUZ4G#3 thank you, any help is greatly appreciated. NOTE I am heading off to bed now, so I will respond around 6:00 AM EST if anyone posts some help

    Read the article

  • How to stabilize PCIe sound card in its card slot?

    - by Josh
    I have a Soundblaster Recon 3d Fatal1ty sound card and randomly every once in a while my computer won't recognize it. I am almost 100% sure it is something to do with its PCIe slot. After I turn off the computer and just wiggle the card a bit, the computer recognizes the card once I restart. I can't really try it in the other PCIe slot because the video card gets in the way. It is a Biostar TA970XE motherboard. I don't know if it is something to do with the pins on the actual card or if it is something to do with the slot. I couldn't find any related issues about this card on Google. Is there anything I can do to help secure the card in its slot so that my computer will recognize it? Any help is appreciated.

    Read the article

  • tcpdump selective acknowledgements question

    - by wlaus
    Hi All, I eventually sometimes watch most initial tcp connection attempts like this: tcpdump -nn -Z somepcapuser not src host (12x.x5.109.xxx or 62.75.160.xxx ) and not (port 9001 or 443 or 8080 ) and tcp[tcpflags]&(tcp-syn) !=0 and not tcp[tcpflags]& (tcp-ack) !=0 or icmp this works pretty well to quickly identify oddness so far. However, I now have a question on the following output: 03:53:52.227884 IP 203.81.166.20.53786 62.75.160.xxx.80: S 846930886:846930886(0) win 61690 "<"mss 1460,nop,nop,sackOK,opt-178:f04700000000,nop,wscale 4"" I wonder what the marked portion means, haven't seen that before. Thanks for help wlaus

    Read the article

  • Removing a custom vim configuration

    - by Hovercouch
    I've added a lot of small mappings to my vimrc that help me work, like noremap H ^ and inoremap jk <esc>. It's diverged enough from vanilla vim that other people at work have trouble coding on my computer. This has been making it harder to pair program with people and get help reviewing code. What I'd like is a way to quickly toggle on/off all of my custom mappings and switch between my vim config and a more 'conventional' one (like relative vs absolute numbering). What would be the best way to do this?

    Read the article

  • How do I delete the Windows Explorer address bar history

    - by mlissner
    Note: I am NOT referring to Internet Explorer. I am using Windows XP and Windows Server 2008 and need to delete the history values from the file browser (aka Windows Explorer). Somebody put a password into the address bar as ftp://user:pass, and now I can't delete the value. Some forums say to delete this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\TypedPaths In Windows XP, the key doesn't exist, and in Windows Server 2008, the key is there, but deleting it doesn't seem to help. Any help?

    Read the article

  • Trying to mount NFS share on Windows Machien at startup with Z: letter for all users

    - by ScottC
    Windows Server 2008 We are trying to mount a specific drive letter on a windows machine from a unix machine. We need the mount to be available to the server even if no users are logged in and to users who are logged in with If we run the command from the command prompt manually it conencts and we have access to the NFS share, and can open it and see and edit files. mount -o fileaccess=777 anon \\127.0.0.1\nav z: (ip address replaced with 127.0.0.1 for security reasons) However if we try to automate the task by making an entry in the task schedule for boot time, to execute the batch script, it adds a disconencted drive to the list in 'My Computer' but it is disconencted and when trying to access the drive an error is produced: Z: is not accessible The data area passed to a system call is too small.| Tried as administrator with highest privelidges, as SYSTEM (group) and as my user (adminstator level user) same results. Is there another way to do this? Most of the help I have found online suggest this way but it keeps failing.

    Read the article

  • Configuring TMUX's status bar

    - by wdkrnls
    I want my tmux session to show my current ip address in the right hand side of the status bar but I am having the hardest time figuring up the right syntax. The command works perfectly in the shell, but tmux won't parse it. set -g status-right '#[fg=white]#(host (hostname))' [Note: I am using the fish shell] I really want it to be: set -g status-right '#[fg=white]#(hostname)@#(host (hostname) | cut -d " " -f 4)' But since I can't get the former status bar to work, this is a lost cause. The weird thing is I got the first one to work once, but then I added the cut.

    Read the article

  • set virtual host on Apache2.2 and PHP 5.3

    - by Avinash
    Hi I want to set my Virtual host on Apache 2.2. So, I can access my site using my IP address and Port number. Like http://192.168.101.111:429 for one site, http://192.168.101.111:420 for other site and so on. My machine OS in Windows 7. I have tried below in my httpd.conf file. Listen 192.168.101.83:82 #chaffoteaux <Directory "Path to project folder"> AllowOverride All </Directory> <VirtualHost 192.168.101.83:82> ServerAdmin [email protected] DirectoryIndex index.html index.htm index.php index.html.var DocumentRoot "Path to project folder" #ServerName dummy-host.example.com ErrorLog logs/Zara.log #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common </VirtualHost> Can you please suggest any thing missing in my configuration. Thanks in advance Avinash

    Read the article

  • HP DAT72x6 autoloader

    - by ericmayo
    Hoping someone here has seen this similar issue and can offer soem advise... I have an HP DAT72x6 auto loader tape backup unit. The external kind, here is a link to an owner's manual I found of it. http://www.dectrader.com/docs/set2/emr_na-c00070400-1.pdf I purchased the unit used about 6 months ago. The unit stopped working after 3-4 back-ups, it's used one day a month to do a monthly backup of another system. Suffice it to say the unit gets very little usage. There is an amber light on the front of the unit called the OAR (Operator Attention Required). The manual states to call for service when this light comes on and stays on. I've tried a few things to resolve but none are working. I've tried power cycling, re-securing the SCSI cables at both ends. Unit was used so I didn't pay much ($500) and so I don't want to spend a lot to have it fixed; might as well buy something new one if fixing this is going to cost more than $100-$150 bucks. I'm curious to see if anyone here has been around these devices or possibly is an HP repair person that can give me some things to try to resolve. The manual states that a solid amber OAR light indicates a hardware failure. When I power cycle the unit I see one of two scenarios so far. The unit powers up, shows self test in the LCD, then LCD changes to show all possible images and the OAR light comes on. The unit powers up, LCD is completely blank, the green lights go through some sort of process of going on and off and later the amber OAR light comes on and stays on. If it's a simple misalignment issue, I may be able to fix myself but not knowing what could cause the OAR light to come on gives me no where to even start. Google around gave no help either. I hoping someone here has experience with this and can help or point me in the right direction. Also, I don't have the HP Diagnostic tools mentioned in many manuals. The unit is connected to a Linux box. The 3-4 backups I've done with it so far have had no issues. We run amanda backup. Before this incident the unit was backing up and reading tapes fine. Thanks for any help or suggestions.

    Read the article

  • Finding the A Record for a Home Server [closed]

    - by Ryan Allred
    I have a hosted website that allows me to add subdomains and point them to different locations on the server. I also know that I can change the 'A Record' to point it to a different IP address. Now, here's the question, I have a home server that I need to access though this hosted website's domain name. How would I go about setting up the 'A Record' on the server to point to my home server. I'm usually pretty good about keyword searches but on this one, I'm pretty lost as to what to search for.

    Read the article

  • CentOS running inside VMware as WebServer times out on outside connection

    - by Tom Hart
    I have a CentOS machine running inside VMware, and I have got PHP and Apache set up on it, so if I open a browser (on the VM) and go to either localhost, or 192.168.0.3, I get a phpinfo page I made in /var/www/html/index.php, but, if on the host (Windows 7), in my browser I go to 192.168.0.3, it times out. I can ping the IP address from Windows and get a response, I just can't through the browser. Does anyone have any ideas what I need to do to get this working? This is my first time using a VM and I'm getting lost in the network settings.

    Read the article

  • PPTP network for server backend LAN?

    - by Sebastian Hoitz
    Here is our problem: We have several webservers, which should be reached from public. The database servers that store the data for the web apps on those webservers though shall not have a public IP. So, since I want to be able to connect to the SQL servers using ssh for example, and those servers need to talk with each other, I had this idea: Internet | ------------------ | | Webserver 1 Webserver 2 Database Server | | | -------------- vLAN -------------- | PPTP | Workstation (my PC) My idea was that I can connect to the vLAN using PPTP so that I have access to all servers in that LAN, but the database server remains unvisible to the public. Is this infrastructure a good idea?

    Read the article

  • DHCP lease time in DrayTek Vigor 2600 Plus

    - by Nelson Reis
    I'm having some problems with my ADSL router DrayTek Vigor 2600 Plus. After a few days and some people connecting to it, it stops assigning IP addresses to new people that tries to connect. I was hoping that reducing the DHCP lease time could improve something. Anyone knows how can I change that in this model? I was also looking for the user guide on the internet, but couldn't find it anywhere. It would be great if someone points me to the pdf.

    Read the article

  • Custom dedicated email server combined with Amazon AWS?

    - by Simon
    Hi there. We are considering moving our servers to Amazone EC2 cloud. The only thing that stops right now is their problems with ip ranges banned from spam mail lists like SORBS. We are considering leaving one dedicated server in our current hosting, the one which we use to send mail (and other several features we will move to EC2), in order to be able to send the mails from this smtp server instead from Amazon. So, the idea is to have our sites hosted in EC2, and when they need to send mail, redirect they to our "local" smtp server. Do you think it´s viable? Can you think on a better solution? Thanks in advance, Simon.

    Read the article

  • spoolsv.exe consumes all CPU and RAM resources

    - by pcampbell
    Consider a Windows 7 x64 installation with 2 printers installed. The system has 8GB installed RAM. One printer is a Brother laser MFC-8220 Printer via TCP/IP, and the other is a CutePDF printer. Problem: the spoolsv.exe regularly eats obscene amount of memory and CPU when the machine is idle. Usually the device is powered off. Turning it on has no effect on the RAM or CPU usage. The first consideration was that perhaps a print job has previously been sent to the Brother, but the queues are empty, and no jobs are waiting. These screenshots do not show, but regularly the spoolsv service will consume all 8GB and climb to use 95-100% of the CPU. The two printers - a Brother and the CutePDF printer both have 0 documents in their respective queues. Question: what measures can I take to ensure the spoolsv.exe doesn't consume inappropriate amounts of CPU and RAM?

    Read the article

  • How share internet connection between two laptops

    - by danielgratzz
    I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

    Read the article

  • Gradually migrate from one SMTP server to another

    - by Bart van Wissen
    I maintain an application that sends out a ton of e-mail on a daily basis. Soon, we will have to migrate to another SMTP-server for that, which has an ip address that has no reputation with respect to email delivery. So instead of just flipping the switch, I would like to start by sending a small percentage of all mail through the new server, and then gradually increase that percentage until we reach 100%. It wouldn't be very hard to implement something in the application itself, but I would like to know if there is an easier, more reliable out-of-the-box-type solution for this. My first thought was to use round-robin DNS for this, but the servers require different credentials, use different protocols (one uses SASL, the other doesn't) and even different port numbers, so I think that rules out the DNS based solution. Is there any way, for example, to configure Postfix to send 1 out of x e-mails to relay host A and the rest to relay host B? Or perhaps a different MTA?

    Read the article

  • Can't access internet using a domain joined computer outside the domain environment

    - by Mike Walsh
    We had an unused box at work so took it home. It had been joined to the domain and hasn't been unjoined. When I try to use it at home (logging in with a local admin account) I can't seem to access internet pages. It gets correct IP and gateway for the local network and correct DNS servers for the home ADSL connection. I can happily ping the home router (which doesn't have any tricky firewall settings). Can't seem to ping outside, get any DNS to resolve, or (obviously) get any web pages. Is there some problem here with this having been joined to the domain?

    Read the article

  • DNS Server Spoofed Request Amplification DDoS - Prevention

    - by Shackrock
    I've been conducting security scans, and a new one popped up for me: DNS Server Spoofed Request Amplification DDoS The remote DNS server answers to any request. It is possible to query the name servers (NS) of the root zone ('.') and get an answer which is bigger than the original request. By spoofing the source IP address, a remote attacker can leverage this 'amplification' to launch a denial of service attack against a third-party host using the remote DNS server. General Solution: Restrict access to your DNS server from public network or reconfigure it to reject such queries. I'm hosting my own DNS for my website. I'm not sure what the solution is here... I'm really looking for some concrete detailed steps to patch this, but haven't found any yet. Any ideas? CentOS5 with WHM and CPanel. Also see: http://securitytnt.com/dns-amplification-attack/

    Read the article

  • Squid 3 reloading makes it stop serving requests

    - by coredump
    So, we use Squid 3 here (3.0.STABLE8-3+lenny4), pretty standard configuration (no dansguardian or similar) + NTLM authentication with LDAP background, circa 1000 users on a busy day, and our acls reference some external files (allowed/blocked sites/ip addresses). On Squid 2.X we used to be capable of reloading it's configuration (to add or sites or addresses to rules, etc) and squid would not stop serving during the reload. Since we changed to 3.0, that seems to be impossible: everytime we use reload (or -k reconfigure) it stop serving requests for as long as 2 minutes, and clients receive a Configured proxy is not accepting connections message. I checked the documentation and got nothing about it, does anyone else suffer from this problem or is it a isolated case on my setup? Also, if you have Squid 3.0 and doesn't suffer from this problem, how is your squid configured?

    Read the article

  • cisco 6500 crash enabling netflow

    - by bleomycin
    Hello everyone, i have a cisco 6503 running IOS 12.2(33)sxi5 and i'm trying to enable netflow. Following the instructions here http://www.manageengine.com/products/netflow/help/cisco-netflow/cisco-ios-netflow.html enabling for interface vlan 3, shortly after ip flow-export version 5 console outputs: CPU_MONITOR-6-NOT_HEARD: CPU monitor messages have not been heard for 30 seconds crashlog here: http://pastebin.com/Niv2H8xD it then writes a crash log and reloads the router. Has anyone else experienced anything like this before? Here is my running config prior to adding the options in the above link: http://pastebin.com/AgNb1ahG Thank you for any help!

    Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >