Search Results

Search found 3545 results on 142 pages for 'fire and forget'.

Page 53/142 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Trying to get a PC to boot off a bootable SD card that is inside an USB attached Android device.

  - by Cyril

  First, I'd like to make myself look less a madman than I may have appeared to be. I wanted to have a bootable USB stick with me at all times, but it's less convenient because it's an extra object and it's easier to lose, forget etc. Then I thought, I have an Android phone, and it has a micro SD in it; perfect. Not all PC's can boot off a card reader, but the phone itself is a card reader when attached as a disk drive. Or at least so I thought. Turns out that my netbook BIOS (tested on Asus eeePC) refuses to see it as an external harddrive; it only recognizes it as a generic USB device and doesn't offer an option to boot from it. The device has a name "Android phone" or smth, so it seems to me that it doesn't work as a "pure" card reader, and instead still manifests itself as a phone. Can it be somehow overridden?

  Read the article

• Thinkpad Bluetooth turns itself on upon restart/hibernate

  - by Traveling Tech Guy

  I have a T400 with Windows 7 64bit. About 3 weeks ago, the Lenovo update pushed a Bluetooth update that added a 2.1 driver and device experience. Since then, my bluetooth turns itself on whenever the OS comes up (full restarts as well as waking from hibernation). I can turn it of using the <Fn>+<F5> Radio menu, but it just turns itself on again the next time. If I forget to turn it off, it just eats my battery that much faster.I've been scouring the web and couldn't find similar occurrences. Is this a hardware issue, a BIOS issue (although no reference to BT in any of the BIOS menus), a driver issue or (shudder) a user issue? Thanks for your help.

  Read the article

• wireshark not seeing all packets on WiFi

  - by Caffeine Coma

  I'm using Wireshark on OSX, trying to sniff my home network over WiFi. While I can see packets that are sent to/from the host I'm sniffing on, I'm not seeing anything else that goes over the WiFi. It's like I'm not in promiscuous mode or something (the promiscuous mode box is in fact checked). The router is an Apple Airport Extreme, protected by WPA2. I'm attached to the network I'm trying to sniff, so I'm confused about why I can't see other traffic. Edit: I solved this by the following: Plug Macbook directly into the Airport Extreme router Enable "internet sharing" on Macbook, with no password. Bind wireless device (the one I wanted to sniff) to the WiFi hotspot generated by Internet sharing in step 2. Run Wireshark on the Macbook, bound to device en1. Don't forget to disable sharing after you're done. :-)

  Read the article

• Disable Recent Items in Jump Lists for Certain Programs

  - by jdecock

  Is there any way to turn off the recent items in the jumplists of specific programs in Windows 7? This feature is useful on some programs (like my text editor) but there are other programs that I don't need everyone to see what I've opened recently (like my video player). I've searched around for a solution to this and I've found two "solutions": Turn off recent items in all jumplists (open the Taskbar and Start Menu Properties and uncheck the "Store and display recently opened items in the Start menu and the taskbar"). Manually clear the recent items history. Neither of these options seem very useful to me. #1 seems like the better solution if you really don't want someone to see your recent documents but then you lose that functionality for all programs instead of just the ones you want while #2 seems like it's something that's way to easy to forget about.

  Read the article

• T61, NVidia, Ubuntu 9.10 == Video problems

  - by David Lazar

  Hi, Upgraded to latest Ubuntu, currently 9.10. Videos used to work fine. Now, playing videos using VLC or any other media player shows them 'sepia' tinged when playing. This is annoying. I remember this used to happen on occasion (after resuming from suspect), and I forget what I fiddled with to make it better. Does anyone have the method to force video to render correctly with this combination? It happens even after a reboot. Thanks

  Read the article

• Choosing Truecrypt volume names and keyfile names

  - by Howiecamp

  Any recommendations on what to name Truecrypt volumes (container files) and where to locate them? Certainly a name like "this is a truecrypt volume.tc" isn't a good idea. Any recommended storage locations? Same question for keyfiles that are generated with Truecrypt. Finally, lets say you choose an existing file, ymca.mp3, as your keyfile. Given that that file is innocuous and normal looking, isn't it easy to forget that's your key file so when you get sick of the Village People and delete the song you're hosed?

  Read the article

• Eclipse: open file in external editor only temporarily

  - by user54690

  Using Eclipse, I can open a Java source file with an external editor by right-clicking on the file name (in the Package Explorer) and selecting Open With ... - emacsclient. I'm very glad to be able to do that. However, I only want to do that sometimes, not every time. Now, when I double-click on that same file name, I always automatically get the file opened in emacsclient. This is particularly annoying when I use the Open Type dialog to find a file, because in that case it's not possible to right-click and choose the default Eclipse editor. Is there a way to make Eclipse forget that I previously opened a particular file with emacsclient, so that it can go back to the default behavior of using the regular Eclipse editor?

  Read the article

• How to lock the c prompt?

  - by allindal

  Is there anyway to lock the command prompt? I need my computer to require a password to use the command prompt. I lock the workstation occasionally but sometimes I forget and if I could just prevent my roommate from doing the "c: net user user *" to change my password it would be great. I do not want to have to use the rundll.32 user command with script to automatically lock the computer. Just a way to lock the c prompt. Sorry for not saying this earlier, I'm running a vista 32bit Asus gene II motherboard with a core i7 CPU

  Read the article

• How to synchronize users, passwords, hosts, etc without NIS

  - by joshxdr

  I am administering a very small solaris 2.6 network with 4 boxes total. Is it possible to use scp or similar to replace NIS for synchronizing users, groups, hosts, etc? This network is only a small part of my job and I don't want to spend too much time on it, and I am worried the setup and maintenence of NIS will not pay off. I need it to behave like a proper multi-user system, when a user logs into any machine, the users, passwords, hosts, etc. are always the same. Is there an easy way to do this with scp? Right now I copy /etc/passwd from one box to another with scp, but sometimes I make mistakes or forget a step, and scp inside of shell scripts don't seem to works so well since they require password authentication. Any recommendations would be welcome.

  Read the article

• PHP does not allow https connections

  - by FunkyChicken

  Hey guys im running PHP 5.4.0 and I cannot cURL nor files_get_content() https connections. Using curl in a PHP script shows: [root@ns1]# /opt/php/bin/php -q test.php * About to connect() to www.google.com port 443 * Trying 74.125.225.210... * connected * Connected to www.google.com (74.125.225.210) port 443 * successfully set certificate verify locations: * CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none Segmentation fault Using file_get_contents() shows: Warning: file_get_contents(): Unable to find the wrapper "https" - did you forget to enable it when you configured PHP? in /test.php OpenSSL and OpenSSL-devel are installed, and PHP is also configured with cURL support for SSL connections. See: http://i.imgur.com/ExAIf.png Any idea what might be going wrong? Further info: CentOS 5.8(64) with Nginx 1.2.4

  Read the article

• On Windows 7, how can I make the Start Menu search feature include matches from within words, not just the start of the word?

  - by Gabriel

  I have a program installed called WinSCP. When I press the Windows key and type "SCP", I get "No items match your search." Is there a configuration option I can set somewhere, so that this item will be found? I'm not looking for a specific solution for this particular program, but something general, so that if there's a program named XYZ, I can find it via the Start Menu search by entering YZ. EDIT TO ADD: I'm looking for a "set-it and forget-it" type of configuration change, so that within-word searching happens always, automatically. I don't want to have to type a * before every query. Apparently this wasn't clear from what I wrote above.

  Read the article

• can not connect via SSH to a remote Postgresql database

  - by tartox

  I am trying to connect via pgAdmin3 GUI to a Postgresql database on a remote server myHost on port 5432. Server side : I have a Unix myUser that match a postgresql role. pg_hba.conf is : local all all trust host all all 127.0.0.1/32 trust Client side : I open an ssh tunnel : ssh -L 3333:myHost:5432 myUser@myHost I connect to the server via pgAdmin3 ( or via psql -h localhost -p 3333 ). I get the following error message : server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request. I have tried to access a specific database with the superuser role using psql -h localhost -p 3333 --dbname=myDB --user=mySuperUser with no more success. What did I forget in the setup ? Thank you

  Read the article

• vps like [load] graphs

  - by foober

  I investigated a couple of tools but they were really annoying and not polished. kSar for exampe is supposed to graph sar output, but it doesn't work. There's a perl script around (sar2rrd) that's supposed to convert sar output in rrd format and generate graphs. Doesn't work. (at least it doesn't like the output of "atsar" as per debian/ubuntu package). Tried munin but it wants to mess with http servers, and for some reason it didn't really work, too. It displayed errors in the webpage generated by the http server it put on port 4949. So, is there a simple install and forget tool to generate daily load,cpu,memory,network graphs? It seems strange to me that this problem has not been solved, maybe I'm looking in the wrong places

  Read the article

• Windows 8 account and MSN

  - by win8user

  I've installed windows 8 and during setup it wanted my email. I provided an alternative email (let's call it email_1) for the installation to complete. Then I've installed windows live (msn only), for which I use another email (email_2). Now, every time I start windows and open msn, I'm signed in with email_1. I selected "forget me" for email_1 address in the msn login window, but I'm somehow always signed in with email_1. Is there any way to completely remove email_1 from the msn?

  Read the article

• Is it safe to use a single switch for multiple subnets?

  - by George Bailey

  For a moment, forget about whether the following is typical or easy to explain, is it safe and sound? Internet | ISP supplied router x.x.x.1 (public subnet) | switch-------------------------------------+ | (public subnet) | (public subnet) BVI router (switch with an access list) NAT router | (public subnet) | (private subnet 192.168.50.1) +--------------------------------switch----+ (both subnets) | | computer with IP 192.168.50.2 ------+ +----computer with IP x.x.x.2 I don't plan to implement this setup, but I am curious about it. The 50.2 computer may send a packet to the x.2 computer, but it will use 50.1 as the router, since 50.2 knows that the subnet is different. Would this result in the packet being received twice by the x.2 machine, first directly through the switch, second by way of the two routers? Do you see any problems with this aside from how confusing it is, and that it would put one switch doing the work of two subnets?

  Read the article

• Running a command line app with sudo and password automatically on OS X startup

  - by Designer023

  I need to run an app at startup/login on my mac. I want it to launch in the background and start doing it's work without interrupting me or me having to start it up because I invariably forget and then when I need it, it wasn't running! I have tried using AppleScript to tell Terminal to run it and type my password in, but it ends up opening multiple Terminal windows and not working. Ideally I need a script that I can just add to the user login items and it will run for me. The app has no way of taking a password argument either and it has a password as well as the sudo! I need a solution that can either be done as an applescript (which can be made into an executable) or i need a commandline script but I have no idea about them. This is the manual code I type $ sudo serverStatus password:123456 password:serverpass My AppleScript: tell application Terminal activate do shell script "sudo serverStatus" delay 5 do shell script "123456" delay 2 do shell script "serverpass" end tell

  Read the article

• Is there a clean way to tell Windows to release a volume?

  - by zneak

  Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive and has to abort there. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away?

  Read the article

• How can I reduce the CPU usage of Offline Files?

  - by Diego

  Whenever I have the Offline Files service running, there is a constant 25% CPU usage on svchost.exe (this is a quad core, so that means it's using up one core). This, in turn, triples the power consumption and keeps the machine hot... I do have several GB synchronized (music collection), but they are not changing at all, in either side. Am I misusing this feature? Is there anything I can configure to keep it down when there's nothing to do? Or should I forget about it and synchronize big folders manually?

  Read the article

• How can I change the subject of messages on an Exchange server automatically?

  - by Chris R

  I want to do something more than just normal mail - folder rules; I want to put a layer in front of my exchange server that lets me, for example, rewrite subjects into a more readable form. I get automated messages whose subject format makes them almost useless. Changing the emitting software is not going to happen, so I need to do something client side. I'm interested in anything that would allow me to do this, either on a mac, or on an older linux distro. Preferably the latter, and preferably in a way that I can turn on and forget about.

  Read the article

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• Run Active Directory Admin Center as another user

  - by dunxd

  I am trying to run Active Directory Admin Center (dsac.exe) on Windows 7 as another user by means of creating a shortcut, rather than having to Shift+Right click and specify the user. On Windows XP I could create a runas shortcut like this (forget for a moment that dsac.exe does not exist in Windows XP): runas /user:DOMAIN\user dsac.exe When I run this on Windows 7, the cmd style windows pops up and asks for the password for DOMAIN\user, but I get the following message: Attempting to start dsac.exe as user "DOMAIN\user" ... RUNAS ERROR: Unable to run - dsac.exe 740: The requested operation requires elevation. How do I get Windows 7 to automatically run dsac.exe as a specified user? I'm happy to fill in a password prompt for the specified user, but would be even happier if there was a solution that cached the password, so I didn't have to enter it more than once a day.

  Read the article

• Is there a way to automatically display the username on the Desktop background in Win7?

  - by Jonas

  We have computer used by multiple users running Win7. Unfortunately, people forget to log out, or they just use the session that is currently open, or they think that they're using their own session, but in the meantime, somebody else has logged on without logging out. To make it clear to people that they're using somebody else's session, I'd like to display the username of the person logged on (the one that's visible in the start menu) on the Desktop wallpaper; something like "John Doe's session". Is that possible?

  Read the article

• shut down FTP from IIS 6 after <X> failed login attempts

  - by Justin C

  Is there a setting in IIS 6 to turn an FTP site off after a specified number of failed login attempts? It has already been documented on this site that a Windows server sitting on a static IP address can record tens of thousands of failed login attempts a month. One server I maintain has had tens of thousands of attempts made against the FTP port. I have solid passwords in place, so I am not overly concerned. I rarely have to use the FTP, so for the most part I turn it on and off as I need it. Sometimes though I forget to turn it off when I am done, only to find the next day that my EventLog is full of audit failures. I would want to set a high number, in case I just messed up the password. Something like if 50 failed login attempts happen, just turn off the FTP site. Then if I need it later I can just start it again.

  Read the article

• Keyboard shortcut / navigation references

  - by jerryjvl

  I use the mouse much too freely, and my wrists are not thanking me for it. I have been meaning to try and use the keyboard more as my sole means of navigating Windows, but I am having trouble sticking with it because when I need to do something and I cannot find the right shortcut, I grab the mouse and forget to let go of it again. Personally, the main software that I need keyboard reference sheets for would be: Firefox Thunderbird Visual Studio Windows itself But I would encourage more general inclusion of shortcut references in the answers in case anyone else tries to make the same transition I am attempting ;) What I am looking for is reference material that is as comprehensive as possible so that over time I can hopefully learn to do everything with the keyboard and spare my wrists. Bonus points for references that can be printed in a reasonable size so I can keep them next to my machine in hardcopy. I know there is an answer for Windows already: Is there a definitive reference for Windows shortcuts keys?, but I am leaving it in my question in case anyone has a better printable alternative.

  Read the article

• In linux: how to exit a program but not kill it?

  - by biomed

  I use Ubuntu 10.10 and I have a python program (mnemosyne) that I synchronize the data files using dropbox. If I forget to close (exit) this program. Here is my problem scenario. I leave the program running at home and go to work but if I open the program at work and work on it the data file is changed and I loose my progress at home when I exit (it automatically saves) when exitimg. I thought I could create a cron job to automatically close mnemosyne every morning regardless os me remembering to do it or not but if I use kill the program exits without saving the datafile and I end up with a tmp file and an error message when I restart it. Is there a better way of sending the exit signal to this program emulating me clicking fileexit menu option. Thanks

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >