Search Results

Search found 128873 results on 5155 pages for 'windows server 2008'.

Page 53/5155 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Can someone correct me about Windows 2008 DFS implementation

    - by cwheeler33
    I have 2 two Windows 2003 file servers using DoubleTake at the moment. They are in an 2003 AD domain. And each server has it's own disk set. It is time to replace the servers... I want to use Windows 2008 64bit Ent. I was thinking of using DFS-R to replace DoubleTake. The part I'm not sure about is clustering. Do I need to have shared storage if each server has a copy of the data? I want to have the data available to the same share name, so maybe I don't fully understand how DFS is set up. I currently have about 6TB of data. I expect to grow by 3TB a year on these file servers. Any resources/books that could teach me would be good to know as well.

    Read the article

  • Forcing users to change password on first login - Windows Server 2008 R2 Remote Desktop Services

    - by George Durzi
    I'm setting up a demo lab environment in which each demo lab user is assigned 4 accounts to use in the lab. Users access the lab via Remote Desktop to the "client" machine in the lab - exposed at demolab.mydomain.com. The Client machine is a Windows 2008 Server R2 Enterprise Edition server The Remote Desktop Services role is configured on this server Remote Connection settings are configured to allow users to connect with any version of the Remote Desktop Client All accounts are members of the local Administrators and Remote Desktop Users groups All accounts are configured to be forced to change the default password after first login The user is instructed to remote into the lab with an account designated as their main account, and establish 3 more remote desktop sessions within the lab using their 3 other assigned demo lab accounts. When establishing the initial remote desktop connection to the lab using their main account, the user sees the change password dialog as expected. However, after logging in and trying to establish remote desktop connections to the server with their three other accounts, they are prompted that they need to change the password after logging in but can't continue with the login process - they don't see the expected change password experience. After logging in with a primary accounts, it doesn't make a difference if I try establishing a Remote Desktop connection to the environment using the name of the server, e.g. Client, or demolab.mydomain.com. I experimented with changing the settings for Remote Connections to require NLA but that didn't make a different. Appreciate any tips. Thanks

    Read the article

  • Windows 2008 VPS always crashes when out of disk space

    - by Pickels
    Hello, I am renting a Windows server 2008 dc SP2 VPS for hosting my Asp.Net projects. Now for the second time this month my VPS ran out of disk space. The first time it was a log file that got to big and yesterday it was my mistake for uploading a website without noticing the lack of space on my VPS. Now the side effect this has is that my VPS corrupts some files when trying to write them. Last time it was Plesk that stopped working yesterday it was IIS. So I was wondering is this normal behavior? I called my service provider to ask if they could restore a back-up and to ask if this is normal and they ensured me it was. I am not trying to blame them and I know it's mostly my fault for not monitoring my VPS better or for not setting better defaults.

    Read the article

  • Windows Server 2008 R2 stuck at System Recovery Options

    - by Magnus
    One of my Windows Server 2008 R2 server has started to go into System Recovery Options at reboot. I have tried to let it go through a System Image Recovery, which it says completes successfully. But after reboot it again wants to do a system recovery. Safe mode doesn't work; it still wants to do a system recovery. Putting in the install DVD trying to do a repair actually brings up the very same System Revoery dialog again. Nothing has changed configuration wise. Any ideas?

    Read the article

  • Oracle 10g to SQL server 2008/ migration

    - by vs1984
    We have a reasonably heavy Oracle 10G database (~ 120 GB space occupied). The database consists of tables, packages, materialized views, procedures etc. We are planning to decommission Oracle and migrate to SQL server 2008. Can you provide your experience on this similar exercise? What is the best approach to undertake this exercise? Are there any tools available with Microsoft to implement this? Once SQL server is commissioned, is it possible to connect SQL server to Oracle server in downstream applications?

    Read the article

  • Concerns about a Dedicated (Windows Server 2008) + DDoS

    - by TheKillerDev
    I am have today a dedicated server with these specs: Intel Core i5 750, 2x120GB (ssd + raid), Windows Server 2008 Web, 200Mbps Network, 24 Gb DD3 And I would like to know what are the best thing I can do to prevent a DDoS Attack, since I know this will be a real threat by the importance of the files that will be archived in it. Today I have apache listening port 80 and RDC listening port 3389. But the security is beeing made only by Windows Firewall. So, any thoughts on what would be good to prevent from DDoS attacks?

    Read the article

  • Changing Administrator password on a Windows 2008 web server

    - by Nick
    I've just taken over the administration of a Windows 2008 web server from a previous employee on a temporary basis. I need to change the Admin password as soon as I can but I've noticed that quite a few of the services also run under this account. So: Is there a quick way to find out which services will be affected by me changing the password or is it a question of going down the list? It doesn't seem right to me that the Admin account is used in this manner; should I create a different account for these services, or is using the Admin a/c standard practice? I realize everyone's servers / networks are set up differently, but are there any other items I should be aware of when changing the Admin password? Thanks

    Read the article

  • Windows 2008 additional disk going offline with reboots on Amazon EC2

    - by Ernest Mueller
    OK, so I took the stock Windows 2008 64-bit Amazon AMI and wanted to add a D: drive for page file space and crash dumps. I launched the instance with a second EBS volume attached as xvdf and went into Disk Management set it online, and added the page file and crash dump settings and all that works. But when I reboot, the box comes back up with that second drive as "Offline." How do I get that disk to automatically come online on reboot (or most notably, when I turn this into an AMI and launch more instances off it - I've tried that too and same deal with the D:).

    Read the article

  • Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

    - by Nathan Ridley
    I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

    Read the article

  • How to monitor the size of files in Windows folder?

    - by zladuric
    What are some of good ways to automatically monitor the size of files in a directory and send warning email if they get close to a certain limit on a Windows server? I have a Progress DB installation to keep in check, and last week we hit some problems. Apparently, the size of extents has hit 2GB - and Progress won't work past that - we needed to open a new extent. I'm coming from a Linux environment, so I don't know what are the usual to monitor this in a Windows environment (or monitoring tools whatsoever). I prefer some generic solution, as I have a mixed environment (Windows 2000, Windows Server 2003, Windows Server 2008 R2). Thanks in advance for all usable alternative answers.

    Read the article

  • Cannot install new certificate in IIS 7 on Windows Server 2008 R2

    - by Alex B.
    We are trying to renew our existing web site certificate on our IIS 7 site under Windows Server 2008 R2, but we continue to get the "Access is denied" error that others have posted. However, when we have gone to implement the common fix of making sure the Administrator group has full access to all folders and subfolders on the C:\ProgramData\Microsoft\Crypto\RSA folder, we get an "Access is Denied" error on changing those permissions. Yes, we are logged in as Administrator user - it just seems to not allow us to modify the group permissions to this folder. Help! We need to renew our certificate before March 2011!

    Read the article

  • Server 2008 R2 Datacenter (and all other version) not detecting hardware

    - by Mitchell Skurnik
    I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

    Read the article

  • Windows 2008, 2 NICS, routing problem

    - by Srodriguez
    Dear all, I've some questions regarding basic routing, can't seem to relate to other questions posted in this site. My architecture: Windows 2008 server with 2 nics in the server. NIC1: IP 10.198.6.xxx, submask 255.255.252.0, gateway 10.198.4.xxx NIC2: IP 192.168.168.xxx, submask 255.255.255, no gateway defined both NICS are just connected to two separate switches, with other computers. I want to be able that all the requests that have a destination of 192.168.168.xxx are redirected to the NIC2, all the other to the NIC1. I know it's possible to do it with the route command, but normally we have to specify a gateway? (route ADD 192.168.168.0 MASK 255.255.255.0 ???) How can this be archived? Thanks a lot for your help!

    Read the article

  • SQL Server 2008, not enough disk space

    - by snorlaks
    Hello, I'm executing sql query on my database. I have SQL Server 2008 installed on my D harddrive which has 55 GB free space. I have also C drive which has sth like 150 MB free (right now). While executing that query on quite a big table (16 GB) I have an error: An error occurred while executing batch. Error message is: Not enough disk space. I would like to know if there is any possibility that I can make SQL Server to use D drive instead of C Or maybe there is any other problem with what I'm doing ? Thanks for help

    Read the article

  • Password Expired Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • Computers on preexisting Windows 2008 domain accepting accounts from Samba3/4 domain

    - by Ivan Vucica
    I have a web application written in PHP where I would like to allow existing users to log into Windows computers, too. Re-hash of their passwords is doable (by requesting them to change the password). And to solve desync of passwords, I intend to have webapp authenticate users primarily against the domain. I don't want to give webapp users accounts on the existing domain, which we can call example.local. Instead, I want to provide them accounts on a new domain, let's call it webapp.example.local. From some research I have done, setting up a Samba4 domain and joining computers into this webapp.example.local domain would be one way to allow webapp users to log in. But, the computers should be members of the example.local domain. How can I get computers that are members of and are authenticating against Windows 2008-based example.local to also authenticate users against webapp.example.local? Magic keywords seem to be "trust relationship", "forest", etc, but at this point I haven't found a concrete example on how to establish this trust.

    Read the article

  • Windows 2008 Server Firewall blocks from printing in other subnet

    - by xenolf
    Greetings, i have a windows 2008 server with activated firewall in the 192.168.0.xx subnet. From there i want to print on an printer which is located in the 192.168.10.xx subnet. Now when i try to print with the firewall on, nothing happens... when i turn the firewall off it prints flawlessly. Now i messed around with the windows firewall for about 4 hours straight and i cant seem to find a rule which lets me print. Even when i set the firewall to let everything through im unable to print. Has anyone encountered the same or a similar problem and has a solution for this issue? Thanks in advance xenolf

    Read the article

  • incorrect DNS entries on server 2008 r2

    - by user137841
    On the main DC (windows server 2008 R2 standard) in our network I have to clear some old DNS entries every now and then in the Forward and Reverse Lookup Zones. I have set the server Aging/Scavenging settings to Scavenge stale resource records, with both the No-refresh interval and Refresh interval to 5 days. Yet every now and then I still have to logon to the sever and remove the DNS entries for computers that is not part of the domain anymore or has been renamed ect. Is there a different way to automatically remove the old entries?

    Read the article

  • How can one automatically logon to multiple user accounts in Windows 2008 R2

    - by DJFriar
    We are running a Windows 2008 R2 Terminal Server. Currently, we have local admin accounts created, one for each client that runs our software (SiteA, SiteB, etc). We need these user accounts to auto logon if the server is rebooted. The accounts need to run a full user environment, as we will login remotely at times via TeamViewer to check processes and makes changes, etc. We are using the Registry Hack method now, but that only allows one account to logon. I've seen a program called LogonExpert, but I've never heard of it so I don't know how trust worthy it is, etc. Is there any other way to auto logon to multiple accounts in our environment? Currently the users are local users, but we could make them domain users if that is required.

    Read the article

  • Cant access websites internally but can externally, happened all of a sudden on Windows Server 2008

    - by Mike Flynn
    Without any type of change I can access sites from within my server, not even Google. I can access them externally. I have no idea where to start. My internet Lan Settings are set to automatic and not to proxy. Nothing was changed on my end, how can I diagnose this issue? Check my server wasnt using a proxy Cant ping or access websites on my server, and others like google nslookup on my sites causes a refusal

    Read the article

  • Password Expired on Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Windows Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • Using Shell32 to extract Mimes on Windows Server 2008

    - by Léon Pelletier
    In a desktop app, I'm using Shell32 to extract Mime infos and ID3 tags. I want to do the same in ASP.Net on server side with http posted files, plus fetch some other infos, but as a Windows Server 2008, there are not several media applications installed, so I wonder if it will still retrieve a lot of informations from the files. Will it be possible to do it from server side? If yes, will it fetch several Mimes without media app installed. If not, is there some Mime pack to get some file informations without the app being installed. [EDIT] I installed VLC player and Windows Media Player on the server, which provide all MP3s / movies infos (Duration, Artist, Album, Width, Height, etc.), but I don't know if this is a good practice.

    Read the article

  • Server 2008 Active directory file sharing Restriction

    - by Usman
    My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

    Read the article

  • 32bit ODBC Postgres driver on Windows 2008 R2 x64

    - by uaise
    I'm trying to install the Postgres ODBC 32bit driver on a Windows 2008 R2 64bit machine. After installing it, with no errors, I go to the ODBC panel, the 32bit version under the /syswow64 folder and try to add the driver, select the Postgres driver from the list but I get an error 126, saying he can't find the driver at the specified path. The problem is that the path he shows me, is the exact path the driver is in, I double checked on the registery (on the HKLM\SOFTWARE\Wow6432Node\ODBC\ODBCINST.INI\ location) and it's fine there too. A couple more people on technet have the same issue too. Did anyone ever run into this? Any ideas would be greatly appreciated. edit: the driver works fine on my win7 x64 test machine, this behaviour only happens on the server.

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >