Search Results

Search found 17977 results on 720 pages for 'someone smiley'.

Page 531/720 | < Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >

• Use external display from boot on Samsung laptop

  - by OhMrBigshot

  I have a Samsung RV511 laptop, and recently my screen broke. I connected an external screen and it works fine, but only after Windows starts. I want to be able to use the external screen right from boot, in order to set the BIOS to boot from DVD, and to then install a different OS and also format the hard drive. Right now I can only use the screen when Windows loads. What I've tried: I've tried opening up the laptop and disconnecting the display to make it only find the external and use the VGA as default -- didn't work. I've tried using the Fn+key combo in BIOS to connect external display - nothing I've been looking around for ways to change boot sequence without entering BIOS, but it doesn't look like it's possible. Possible solutions? A way to change boot sequence without entering BIOS? Someone with the same brand/similar model to help me blindly keystroke the correct arrows/F5/F6 buttons while in BIOS mode to change boot sequence? A way to force the external display to work from boot, through modifying the internal connections (I have no problem taking the laptop apart if needed, please no soldering though), through BIOS or program? Also, if I change boot sequence without accessing external screen, would the Ubuntu 12.1 installation sequence attempt to use the external screen or would I only be able to use it after Linux is installed and running? I'd really appreciate help, I can't afford to fix the screen for a few months from now, and I'd really like to make my computer come back to decent performance! Thanks in advance!

  Read the article

• Is there any way to distribute x264 encoding jobs across multiple computers (to increase the encoding speed)?

  - by Breakthrough

  Does anyone know of a current, active solution to encoding x264 videos across many computers (via the network) to increase encoding FPS? Brownie points for cross-platform and open source, but just so you all know, I usually use Windows. Programs that I have heard of, and why I do not believe they are suitable: x264farm: Not actively developed. Good interface, but does not support two-pass encoding, and fails with newer x264 builds. ELDER: Again, not actively developed, but my issue was that it didn't work with new x264 builds, and it was very difficult to configure (read: randomly stopped working). While I don't absolutely need a program which is being actively developed, I would like one that supports two-pass encoding, and works with new(er) x264 builds. Additional information: So far, I've offered (and awarded!) two separate bounties on this question since I first posted it over two years ago, and I still haven't found a solution to this problem. What I'm looking for basically is a simple program to allow me to encode x264 videos using the processing power of multiple computers connected over a LAN. Furthermore, it would be nice if it worked with new(er) x264 builds, and supported two-pass encoding. If at any time someone has an updated answer, or a new solution to this problem, please post it and it will be given some consideration.

  Read the article

• "Ethernet" doesn't have a valid IP configuration

  - by Xuzuno

  I'm using an ethernet cord to connect to my internet and it has been working well until Thursday morning when I turned on my laptop (Windows 8) to see a yellow triangle sign in the bottom right hand corner, in front of the ethernet connected symbol. Since then I haven't been able been able to access the internet from my computer. When I hover over it, it says that it is an "Unidentified network" and there is "No internet access". I've run the Windows 8 troubleshooting and it says that the problem found was ""Ethernet" doesn't have a valid IP configuration", but I'm unsure how to fix it. I'm thinking that the problem is to do with my computer rather than my network, because I've tried another laptop (Windows 7) through the same ethernet cable and connection and the internet works fine on the other laptop. I've tried so many fixes that I've found online, with none of them actually working. Yesterday I even tried a full system reset, where I re-installed Windows 8, re-partitioned and wiped everything off the hard drive, but it still appears have the exact same problem. Today I also purchased and tried a new ethernet cable which didn't work, so I then purchased a USB to Ethernet adapter, to make sure that it wasn't my ethernet port on my laptop that was faulty. That didn't work either, and the same problem still remains. I feel like I've tried everything, so can someone please help me?

  Read the article

• Why is it a bad idea to use a customer email as the from address

  - by Crab Bucket

  I've got an application that emails users once they have filled in a form. It uses a [email protected] as a from address. The customer wants it to use the email from the form as the from address which could be anything. I have been told that this is a bad idea due to spoofing/blacklisting and spam. I feel really vague about the exact reason about why this is a bad idea particularly as i've got to try to counsel the client out of this. Can someone explain to me why this is a bad idea. Interestingly the client has used a gmail account as the from address as a demo which not only works fine but has enabled the application to start sending emails (it wouldn't do it before with an email which was [email protected]). Erm - what is going on. I'm told one thing and the opposite works. Sorry - i know this is basic but I could find anything on a google search. Largely I think because I'm having trouble even framing the question. EDIT Thank you everyone - great answers. Interestingly the server sending the email and the mail box that it is going to are both behind the same firewall so the client says they are unconcerned about spam. Oh well.

  Read the article

• Virus cleanup; Windows Automatic Updates service crashes in esent.dll

  - by quack quixote

  Background I'm doing system recovery on an old WinXP SP1 system brought to me on suspicion of virus infection. After taking preliminary backups, I used MalwareBytes to detect and clean the infection. I might've even gotten it all. In the process, I've discovered (a) the system drive is showing signs of impending failure, and (b) the owner has been using the system's old crusty IE-6 instead of the up-to-date Firefox I've provided for him. So naturally, thinking I had a relatively stable system, I tried to hit the Windows Update site to install IE-8, in case further training doesn't stick. The update site told me it needed to update the installer, and I started that process. Soon after, wuauclt.exe started crashing, reporting addresses in module esent.dll. There's a Microsoft KB (910437) on a problem with that DLL, so I downloaded the hotfix and installed. The crashing did not stop. I attempted to install SP3 from the offline installer, but that didn't fix the issue either. The system is reporting a few hard drive / IDE controller errors, but they don't correlate to the crashes, so they aren't the direct cause. I've also attempted to rollback to the time between the infection removal and the first crashes, but that doesn't help. Question The hotfix I tried to install dealt with problem in transaction logs of the Extensible Storage Engine (ESE) database. I suspect this issue is similar, but that the database itself (whatever the ESE database is) is corrupted. Is there a way to clean or clear this database so that system operation returns to normal? Can someone enlighten me as to what the ESE database actually is, and where it resides? Can I just locate some files and delete them to bring this under control?

  Read the article

• What's wrong with my .htaccess? Trying to simplify actual code

  - by AlexV

  This is my actual .htaccess: #If the requested URI does not end with an extension RewriteCond %{REQUEST_URI} !\.(.*) #If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/(excluded1|excluded2)/ #Then serve the URI via the mapper RewriteRule .* /seo-urls/seo-urls-mapper.php?uri=%{REQUEST_URI} [L,QSA] #If the requested URI ends with .php* RewriteCond %{REQUEST_URI} \.php.*$ [NC] #If the requested file is not seo-urls-mapper.php (avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!seo-urls-mapper)\.php.*$ #Then serve the URI via the mapper RewriteRule .* /seo-urls/seo-urls-mapper.php?uri=%{REQUEST_URI} [L,QSA] Since all conditions are compatibles except the 1st ones (no extension and *.php* match) all I should have to do is to add the [OR] condition to these 2 lines, but when I'm adding it it's not working (my no extension rule don't work anymore). This is my new (not working) code: #If the requested URI does not end with an extension OR if the URI ends with .php* RewriteCond %{REQUEST_URI} !\.(.*) [OR] RewriteCond %{REQUEST_URI} \.php.*$ [NC] #If the requested file is not seo-urls-mapper.php (avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!seo-urls-mapper)\.php.*$ #If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/(excluded1|excluded2)/ #Then serve the URI via the mapper RewriteRule .* /seo-urls/seo-urls-mapper.php?uri=%{REQUEST_URI} [L,QSA] Hopefully someone will be able to clarify this issue... I guess I don't fully understand the use of [OR]. Thanks!

  Read the article

• Boot drive not found issue after cloning using Apricorn EZgig

  - by TomWilsonFL

  A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

  Read the article

• Hadoop streaming job on EC2 stays in "pending" state

  - by liamf

  Trying to experiment with Hadoop and Streaming using cloudera distribution CDH3 on Ubuntu. Have valid data in hdfs:// ready for processing. Wrote little streaming mapper in python. When I launch a mapper only job using: hadoop jar /usr/lib/hadoop/contrib/streaming/hadoop-streaming*.jar -file /usr/src/mystuff/mapper.py -mapper /usr/src/mystuff/mapper.py -input /incoming/STBFlow/* -output testOP hadoop duly decides it will use 66 mappers on the cluster to process the data. The testOP directory is created on HDFS. A job_conf.xml file is created. But the job tracker UI at port 50030 never shows the job moving out of "pending" state and nothing else happens. CPU usage stays at zero. (the job is created though) If I give it a single file (instead of the entire directory) as input, same result (except Hadoop decides it needs 2 mappers instead of 66). I also tried using the "dumbo" Python utility and launching jobs using that: same result: permanently pending. So I am missing something basic: could someone help me out with what I should look for? The cluster is on Amazon EC2. Firewall issues maybe: ports are enabled explicitly, case by case, in the cluster security group.

  Read the article

• Computer hangs at BIOS screen. Cannot enter setup

  - by d2jxp

  I have an HP Pavilion a6500f (it's a year out of warranty) and it's hanging on the blue HP BIOS screen. If I mash F10 while it's starting up, it will say "Entering Setup..." but I will see no results. It will hang there and not do anything. If I actually wait until I can see the screen and then hit F10, there's no response at all and the computer will sit at the BIOS menu. I've dusted and cleaned it out, reseated the memory, switched the RAM slots, and reset the CMOS battery using the reset jumper. I'm out of ideas. I'm pretty sure it's not a hard drive issue, since my problem is at the BIOS. After this post, I'll disconnect the hard drive and try to just boot without it. Anyone have any other ideas? Edit: Okay, so I tried disconnecting the hard drive and now I can get back into the BIOS. I reconnected it and I'm locked out again. So the problem is my hard drive.. I guess I should delete this post unless someone has any ideas as to what's wrong with the drive?

  Read the article

• Scripting a permanent CTRL / CAPS swap in Gnome?

  - by Duncan Bayne

  I have a bash script that I use to configure a vanilla Ubuntu (10.10 Maverick Meerkat) installation to be exactly the way I want it. I make extensive use of gconftool-2 to configure the desktop, set up shortcut keys, etc. Now, I'm trying to swap the CTRL and CAPS keys. I have found two ways of doing this: In Gnome, go to System - Preferences - Keyboard - Layout - Options and make the change in there. This works well, but I don't know how to script this; the setting doesn't seem to be stored in the usual place as I can't find it with gconf-editor. Add the line setxkbmap -option "ctrl:swapcaps" to my .bashrc file. That works too, until I suspend the machine & then resume it. At that point the CTRL and CAPS behaviour return to normal, until I cause .bashrc to be run again by opening a new shell. This behaviour has been reported as a bug in RedHat. Could someone please suggest a way of switching those keys that is both permanent, and can be scripted? I'm sure I must be missing something obvious here ...

  Read the article

• moving files and directories between two machine, via a third, preserving permissions and usernames

  - by Jarmund

  The situation is as follows: Machine A has a file repository accessible via rsync Machine B needs the above mentioned files with all permissions and ownerships intact (including groups etc) Machine C has access to both A and B, but has a completely different set of users. Normally, i would just rsync everything over, directly between A and B, but due to severely limited bandwidth at the moment, i need something different, as rsync times out after building the list of the 430 files (49Mb uncompressed... can be compressed down to ~7Mb). What i've tried so far: rsync everything over from A to C, tar it, copy the tarball over, and then untar it, however, this messes up the ownership and/or the permissions. To rsync it from A to C, i run this command: rsync --numeric-ids --password-file=/root/rsync_pwd_file -oaPvu rsync://[email protected]/portal_2/ ./portal_2/ ...and from the looks of things, they do end up on C with the correct ownerships/permissions/flags/everything (not 100% sure, though.. are there any more switches i can throw in there? did i miss something?) copying the tarball over is simple enough (slow as a one-legged turtle due to the bandwidth, but it checksums out alright) What i'm unsure of is the flags and switches for creating and extracting the tarball, so could someone please provide the full commands for creating a tarball from /root/portal_2 on machine C (with everything intact) and extracting the tarball into /var/ex/portal_2 on machine B? ? Also, are there any other approaches worth mentioning that could allow me to perform this? I have root access to A and C, whereas i only have rsync access to B. PS: I'm running rsync v2.6.9 on machine B, and unfortunately i do not have the oportunity to upgrade to v3

  Read the article

• Many different BSOD

  - by Exa

  I'm experiencing multiple bluescreens for a couple of months now. Their error code is as diverse as their time of occurence... Sometimes it happens during gaming, sometimes when watching videos, sometimes when the computer is idle. These are the bluescreens I see most often: PAGE_FAULT_IN_NONPAGED_AREA KMODE_EXCEPTION_NOT_HANDLED IRQL_NOT_LESS_OR_EQUAL SYSTEM_SERVICE_EXCEPTION SYSTEM_THREAD_EXCEPTION INTERRUPT_EXCEPTION_NOT_HANDLED DRIVER_IRQL_NOT_LESS_OR_EQUAL DRIVER_OVERRAN_STACK_BUFFER Responsible drivers (according to the memory dumps): hal.dll tcpip.sys dxgmms1.sys ndis.sys mouhid.sys atikmdag.sys dump_atapi.sys and of course: ntoskrnl.exe My first thought was a driver incompatibility because I am using Windows 8 and some of the bluescreens seem to come from driver issues. All drivers are up to date. I'm afraid that my memory is broken or the mainboard or both. I used the windows integrated memtest which didn't find any errors. Memtest86 found some errors. Does it make sense to buy new memory? Couldn't it be a problem of the board as well? I also read that my memory could run at a too low voltage. But it's set to 1.5V as recommended. Another guess would be to set the memory's latencies manually, but how do I know which ones to try? Here is a screenshot of bluescreenview showing the latest bluescreens. Maybe someone has faced the same behavior before and found a solution. Any ideas or suggestions? Current setup on which the bluescreens occur. Windows 8 RTM (6.2.9200) Asrock 970 Extreme4 AMD FX-8150 ATI Radeon HD5850 16 GB RAM (DDR3-1800) Latest drivers for all devices

  Read the article

• Two monitors with Mac Mini - one displays black despite receiving a signal

  - by alex

  My Mac Mini outputs to my two new monitors - Dell U2311Hs. The LED on the bezel displays blue when receiving a signal, or yellow otherwise. Both screens are displaying blue. It also seems my Mini can see both of them... However, one of them is black. It just displays black, but appears to be receiving a signal (when I turn the Mac off, it then displays No Signal). To make things weirder, on startup, the boot up (white with Apple logo) appears on the right monitor (the one that now displays black). Occasionally, it flickers up on the black screen for 1 second. I have tried Detect Displays. It appears to do nothing. I'm also running a dual monitor KVM. Video connections are DVI-D. How can I fix this situation? Thanks. Update This is the weirdest thing - I used the DVI-D cable that came with the KVM and it seems to have fixed it - I didn't both because it looks identical to any other DVI cable (in form an pin out). So, I will accept an answer if someone can tell me what may be the difference in these cables?

  Read the article

• What is the oldest hardware still in production use? How is it kept running?

  - by sleske

  In the spirit of the question What is your oldest hardware that still works?, I'd like to ask: What is the oldest hardware you know that is still in production use? And what challenges did you (or someone else) face in keeping it running (scarce documentation, no support, no spare parts available...)? Most organizations will retire / upgrade software and hardware after 5-10 years, but sometimes old software is kept running on old boxes, because it "just works". I once worked at a client site that was running a critical piece of (in-house developed) business software on a single server running HP-UX. The server was old (ca. 12-13 years), but fortunately still running without problems; however, getting spares would have been very difficult, and since software installation was undocumented, any significant system changes or even new hardware might have caused significant downtime and data loss. We eventually managed to replace it, but this is not always possible. I also read that many organizations still run decade-old mainframe hardware, particularly for highly customized systems controlling industrial machines or power plants. Which old hardware have you encountered? How did you manage these challenges? Related question: http://serverfault.com/questions/82467/should-old-servers-be-retired

  Read the article

• CPU not working on a specific motherboard

  - by Shaman

  I'm making a computer for someone and I met a weird problem. The CPU that I have doesn't work on this motherboard. The CPU is an Intel Pentium D 925 and the motherboard is an ECS G41T-M6, which in theory should work together. The only thing reused is the power source(400W). When I start the computer, the fans start, and that's it. The BIOS doesn't boot. I tried my own power source (600W Corsair) and nothing. Removed the RAM, no warning. In desperation I tried the last thing, swaped my own CPU with this one (Core2Duo E7200). Lo and behold, it worked. Both. The Core2Duo worked on the ECS with the old power source and the RAM that I used in the first place, and the Pentium D worked on my Gigabyte G31M-ES2L. What I discovered was that the Pentium D didn't receive power on the ECS, because I tried running it without the cooler and it remained at room temperature. On a side note, I also removed the HDDs just in case. So, in conclusion, any ideas? I can't return it, and I can still use it to upgrade another PC, but I would really prefer not to buy another CPU if possible.

  Read the article

• Generic/Text Printer on Windows 7 not prompting for file name

  - by Trevor Tippins

  Hope someone can shed some light on this. I am downloading reports from an AIX-based system by directing them to a TT printer which the terminal emulator (MultiView 2000) intercepts and directs to the default printer on the local system. This local printer is configured as a vanilla Generic/Text printer attached to a FILE port. When I print from AIX, the output is spooled down and the local printer prompts for a file name into which to save the file...but not under Windows 7. This has worked fine for many years, on both Win2K and WinXP. However, on Windows 7 the output gets spooled as a file into spool\PRINTERS (and looks as expected) but the print job then hangs with a status of "Error - Printing" and never prompts for a file name. I have to cancel the job. The Generic/Text printer works as expected with other applications. I have tried setting the printer to print directly rather than spooling but this only serves to hang the terminal session too. I've also tried to run the emulator in Windows 2000 Compatibility Mode and as Administrator in case it was something like that but with no luck. As you might expect, it does work fine in XP Mode (as long as I print to a printer defined therein and not the host's printer) but operationally this isn't going to be an option. Obviously this emulation software is a decade old (at least) and I could just cross/upgrade all the users (at a cost) but, before I do so, has anyone seen this sort of behaviour before and found some sort of fix? Remote OS: AIX 5 Client OS: Windows 7 Pro (32-bit) Printer: Generic/Text on a FILE port TE Software: MultiView 2000 (32-bit) Thanks in advance.

  Read the article

• Is there a command to change primary group for a new user in Cygwin?

  - by Rob Gilliam

  Is there a way to set a (new) user's primary group in Cygwin's /etc/passwd file without hand-editing the file? I have a local group set up for members of the Dev Team on a Windows Server 2008 R2 box so that we can all modify a particular group files, but the regular users can only read them. As some of the work we do uses scripts that rely on Cygwin tools, this group is also in the /etc/group file. When I need to add a new user to the "Dev Team" group, I add them in Server Manager, and then use mkpasswd to add that user to Cygwin's /etc/passwd file. Unfortunately, they get the regular Domain Users group assigned as their primary group and I then have to go in and edit the passwd file to change the group. I now need to write some instructions for someone else who is not au fait with UNIX/Linux/Cygwin so that they can set up new Dev Team users and obviously "hand editing" /etc/passwd is a recipe for disaster if you don't know what you're doing. So, is there a way of getting mkpasswd to set a different primary group, or another tool like Linux's usermod which can be used for the purpose of changing the group in a more controlled manner?

  Read the article

• Retrieve a user's Exchange database in powershell

  - by Paul

  Hey Everyone, I've scoured the interwebs for a few days now off and on to find this. I am creating a powershell script for email-enabling new user's(Exchange 2007). To give you a little background when we have a new hire, their AD account is created at our off-site helpdesk, but they don't create their email account. I'm trying to automate the process of mail-enabling the user which involves putting them in the same database as an existing user, disable imap pop activesync, and lastly email the requester of the ticket. I would like to just get prompted for the New User's name, User to Replicate(mailbox, storage group, database), and the person to email after it's been created. So if someone could just help with a command to Retrieve a user's Exchange database in powershell that would be great, but if people also want to help with my hacked up script please do so as well!!! Here is what I have so far: Write-output “ENTER THE FOLLOWING DETAILS” $DName = Read-Host “User Diplay Name" $RUser = Read-Host "Replicate User(Database Grab)" ***$RData = #get the Replicate user's mailbox database here*** $REmail = #either just use a Read-Host “Requester's Email address" or ask for Requester's name and pipe through their email address by digging for it w/ powershell Enable-Mailbox -Identity "$DName" -Database "$RData" Send-MailMessage -From "John Doe <[email protected]>" -To (put $REmail here which is the Requester's email) -Subject "Test Person's email account" -Body "Test Person's email account has been setup.`n`n`nJohn Doe`nGeneric Company`nSystems Administrator`nOffice: 123.456.7890`[email protected]" -SmtpServer genericexchange.exchange.com

  Read the article

• how do you view / access the contents of a mounted dmg drive through TERMINAL hdiutil diskmount

  - by A. O.

  My external USB drive failed. I made a .dmg image file of the drive using disk utility. Later I was not able to mount the .dmg image. I used terminal hdiutil attach -noverify -nomount name.dmg diskutil list diskutil mountDisk /dev/disk4 then received the following message: Volume(s) mounted successfully However, I cant see the drive or access its contents through Finder. DUtility shows the drive as ghost but I still cant mount it using diskutility. Terminal tells me that the drive is mounted and constantly shows it in the diskutil list. pwd is not the mounted .dmg image. I dont know how to enter into the mounted image drive to see its contents. So in case what I said sounds like I see the files in the mounted image no this is not the case. I do not know how to access or even change the pwd within Terminal. I was hoping to see the mounted drive tru finder but I do not see that. So I need help as to how to find a way to access the mounted image drive if it was really mounted. Terminal says that it was and it shows it under diskutil list as a /dev/disk4. Can someone please help me access the files on this drive?

  Read the article

• How to Access User Directory shared by Apache on OS X Mountain Lion?

  - by schluchc

  When trying to access the local user web page on localhost/~username, I get a "403 Forbidden". The system web page in /Library/WebServer/Documents is accessible on localhost/ though, so I assume Apache is working fine. I know that this problem has been discussed several times, also on superuser. I implemented and checked all I could find, but I still couldn't solve the problem and would be glad if someone had a suggestion for this particular case: sudo apachectl -t returns Syntax OK. I have a username.conf file in /etc/apache2/users/: <Directory "/Users/username/Sites/"> Options Indexes MultiViews FollowSymLinks AllowOverride AuthConfig Limit Order allow,deny Allow from all </Directory> as proposed here [SuperUser] and in several other tutorials. The permissions of the username.conf file are -rw-r--r-- root wheel, as they should be. The httpd.conf is unchanged and therefore contains the line Include /private/etc/apache2/extra/httpd-userdir.conf. That file in turn contains UserDir Sites Include /private/etc/apache2/users/*.conf <IfModule bonjour_module> RegisterUserSite customized-users </IfModule> So the httpd*.conf files should be ok. The permissions of /Users/username/Sites is drwxr-xr-x 10 username staff and -rw-r--r--@ 1 username staff for the index.html. In the error log I simply get a [Sun Nov 25 22:14:32 2012] [error] [client 127.0.0.1] (13)Permission denied: access to /~username/ denied. And yes, after each change I did the sudo apachectl restart. Any help no how to solve the problem or how to further analyze it would be highly appreciated!

  Read the article

• Send command through PuTTY automatic login

  - by Arthur

  I am using the following to login automatically to a remote server and then run commands listed in a commands.txt, like this: C:\path to\putty.exe -ssh adreese.ip -l user -pw Password -m C:\Path to\command.txt commands.txt contains the following: wakeonlan -i broadcast adress Macadress However, when I try to do so a new window for PuTTY appears, but it closes and exits instantly after login. As a result, I cannot see the output of the command(s). After a several tests, it appears that the command is not execute , cause my computer doesn't "wake on lan". I don't understand what's going on here ? I cannot use the plink.exe program cause I cannot make connection with public key ( too much distant site for doing all the registration keys in putty ) Can someone help me with this ? Or can i use another program to make ssh connection and send command with script from a windows os? Edit : I also try to make a bash file in the distant server with the same command and execute it from the session like this : C:\path to\putty.exe -ssh adreese.ip -l user -pw Password \home\user\script.sh Ihave the same problem... Need help please : /

  Read the article

• Internet setup for my office

  - by prakash

  We have two internet connections to our office and our current setup is like this.. The internet connections require pppoe log in so i take each cable and plug it into a wifi router and configure the router to log in to the pppoe and then plug in a cable from the router to a switch and distribute the internet throughout my office. The problem with this setup is it is really hard to monitor and im not able to monitor who is hogging internet usage and what he or she is actually using it for. apart from this we also have a nas setup which is routed through another switch . Could someone please throw a little light on how i can restructure this setup for easy monitoring and better transparency... ? each wan router is connected to a different switch and is distributed to users accordingly.. we have around 40 users in the office.. we want to setup a single linux box to which i want to connect the two wan connections and from there distribute it to all our users.... im looking for a solution where we do not have to invest more that buying a single pc and a couple of nics

  Read the article

• Moving a site from IIs6 to IIS7.5

  - by Sukotto

  I need to move a site off of IIS6 (Win Server 2003) and onto IIS7.5 (Win Server 2008) as soon as possible. Preferably tomorrow. The site itself is a delightful mix of classic asp (vbscript) and one-off asp.net (C#) applications (each asp.net app is in its own virtual dir and has a self-contained web.config). In case it's relevant, this is a sort of research site made up of 40 or 50 unconnected microsites. Each microsite is typically a simple form allowing a user to submit a form, which then runs a Stored Proc on a sqlserver db and displays a chart and/or table of the results. There is very little security to worry about. The database connection info is in a central file (in the case of the classic asp) or app's individual web.config (lots of duplication there) To add a little spice to the exercise... I have no idea how to admin IIS The company no longer employs the sysadmin or the guys who set this thing up. (They're not going to employ me much longer either but my sense of professional pride does not permit me to just walk away from this task). The servers are on mutually firewalled networks and I have to perform a convoluted, multi-step process to copy anything from one to the other. Would someone please point me to a crash-course tutorial for accomplishing the above? I have: a complete copy of the site's filesystem on the new box installed the 3rd party charting tool on the new system a config.xml file from the "all tasks - save configuration to a file" right click menu. There doesn't seem to be a way to import it on the new system however. The newer IIS manager has a completely different UI and I'm totally lost. Please help.

  Read the article

• Creating a Jenkins build farm in a hands-off manner?

  - by user183394

  My colleague and I have set up and run Jenkins on a KVM guest running Ubuntu 12.04 with good results for a while now. We are thinking about deploying a cluster of Jenkins CI hosts in master/slave configuration, with the libvirt slave plugin to keep our hardware count low. Our environment is strictly Linux (CentOS, Scientific Linux, Fedora, and Ubuntu). Both of us are competent in setting up large clusters. We typically use tools like cobbler + a configuration management tool (Puppet, Chef, and alike) to set up a large number of machines (physical and/or virtual) hands off (hundreds of nodes in less than an hour typical). We would like to do the same for nodes running Jenkins. But the step by step guide doesn't give us any clues in this regard. I did see a Multi-slave config plugin. But, being used to dealing with hundreds or more machines completely hands-off, clicking the UI for many machines just doesn't feel right. Can someone point to us a reference that talks about how to set up large cluster of Jenkins CI hosts more in the hands-off way?

  Read the article

• PCI Tv Tuner not receiving signal

  - by C-dizzle

  I inherited an Angel II PCI Dual TV Tuner card, popped it into my computer's PCI slot, plugged in my coax cable, but am having trouble getting any type of signal to it. The computer I am using is Windows 7 Ultimate 32 bit, I know the card works because the computer recognizes it and installs the drivers, or at least I assume it works because of that. I'm trying to use Windows Media Center to watch/record tv. Here are a few things I have tried to get it working: Uninstalled/Reinstalled the newest drivers Tried hooking up an antenna to the coax input instead of my cable Instead of using cable splitter, went directly from wall output into card with coax cable Tried using different output on splitter in case the out port was bad I haven't tried a different coax cable yet, it should be fine since it's pretty new. Since this is my first time setting up a TV Tuner card, is there anything specific that I need to do with it? Is there any configuration that needs to be done on it? Do I need to have a digial receiver? I was getting pretty frustrated with it so I wanted to turn here to the experts, I'm sure someone can help me figure it out.

  Read the article

< Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >