Search Results

Search found 18151 results on 727 pages for 'upside down'.

Page 531/727 | < Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >

• CPU operating temperature ranges

  - by osij2is

  I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

  Read the article

• Using keyboard disables touchpad left button for a second on Acer laptop in Windows 8.1

  - by Robert Kilar

  The problem is present in the whole system not only in games: desktop, chrome, games, everywhere. When I press any "input key" on a keyboard for example in desktop I can't select the file by left mouse button OR by tapping the touchpad for about one second(right button works immediately). Later on the LMB works well. There is NO delay, button is just deactivated for a second. In games that means that when I run I cannot shoot for example. When I switched LMB and RMB functions in windows control panel still the LMB is getting disabled and RMB works fine. By "input key" I mean letter or a number, keys like Alt, CapsLock, Ctrl does not affect touchpad. I do not remember that problem when I used Windows 7. USB mouse works like it should. The problem existed when I was using Elantech touchpad driver and after I uninstalled it and used Windows 8.1 generic driver. EDIT I installed the Elantech drivers and set values to 0 at every disable... key. But the problem is still present. EDIT 2 THE LAPTOP IS Acer V3-571G I have turned off disabling function in touchpad but it did not fix it. I know that touchpad is NOT broken down. Turned on the animated touchpad icon of elantech drivers and put it on the task bar(on a picture) When I type the letter and press the LMB the dynamic icon displays the click but it is ignored.

  Read the article

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

• Why is REMOTE_ADDR only sometimes available as an Apache environment variable?

  - by Xiong Chiamiov

  To avoid having to parse X-Forwarded-For in Varnish, I'm trying to just set a header on the SSL terminator (currently Apache) that stores the direct client IP in a header. On our development machine, this works: RequestHeader set X-Foo %{REMOTE_ADDR}e However, in staging it doesn't. Specifically, the header is empty, as illustrated by both varnishlog: 13 TxHeader b X-Foo: (null) (On the development machine, this shows the IP address as expected.) Similarly, logging REMOTE_ADDR shows that it only appears to be populated on the dev machine: # Config LogFormat "%{X-Forwarded-For}i %{REMOTE_ADDR}e" combined CustomLog "/var/log/httpd/access_log" combined # Log file, staging <my ip> - # Log file, development <my ip> <my ip> Since the dev machine is, well, a dev machine, it is different in a number of ways; however, I can't track down which difference is causing this. The versions of Apache are the same (2.2.22), and I don't see anything relevant in any of the standard config files or /etc/sysconfig/httpd. And the rest of the system is reasonably similar, since they're built off the same CentOS 5 base image. I can't even tell from the Apache documentation whether REMOTE_ADDR is expected to exist or not as an environment variable, but it clearly works on one machine, whether by fluke or design, and the inconsistency is driving me mad.

  Read the article

• Why does BitLocker need a minimum volume size of 64 MB?

  - by Iszi

  Since the future of TrueCrypt appears to be still unclear, I figured I'd try to get my stuff migrated into BitLocker at least for the time being. I nearly never have to access my encrypted data from anything that's not BitLocker-capable, so cross-platform compatibility isn't a big deal to me at this time. However, I am having a bit of an issue understanding the minimum requirement of a 64 MB volume. With TrueCrypt, I was able to protect small files (and most of my protected files are fairly small) in containers down to 300 KB or even less. When I finally created a VHD of an appropriate size last night (100 MB), it seemed the file system itself only took up about 3 MB and encrypting it with BitLocker didn't appear to take up any more. While 3 MB is still an order of magnitude larger than the smallest volume I could make with TrueCrypt, it's still relatively reasonable in comparison to 64 MB. This is an especially large amount of overhead (and largely wasted at that, since it's mostly empty space for now) when I consider that some of these volumes will be stored and synced in the cloud. What possible reasons could BitLocker have for needing volumes to be 64 MB large, when it's not even appearing to use that space? BitLocker FAQ on TechNet

  Read the article

• Create image (EBS AMI) takes forever - possibly caused MySQL Server to break?

  - by fuzzybee

  I'm trying to create an EBS AMI from my running EC2 instance to reuse my LAMP fully configured (for my needs). I got my website up and running yesterday on this EC2 instance my MySQL was working fine until this morning (it's not that difficult to install LAMP thanks to yum so I can't see how I could go wrong with this; having said that, it's always difficult for one to realise his own errors) I have seen "Loading, please wait ..." for a few hours now. How do I know whether this is completed or its progress? Shortly after I tried to create the AMI image from my EC2 instance, I encountered database connection error can't connect to local mysql server through socket '/var/lib/mysql/mysql.sock' I was able to restart mysqld at first. But database connection was down again. This time, I could not restart mysqld anymore. It shows MySQL Daemon failed to start. Could my attempt to create the AMI by any chance cause the MySQL server to reboot or corrupt? I did a lot of searched and have done the following although I think I shouldn't have to do any workaround for MySQL server to work here chown -R mysql.mysql /var/lib/mysql/ I also found this workaround but I'm very reluctant to follow due to my belief and the fact I would need to understand this problem first. Any help would be greatly appreciated. Getting back to searching for a solution for the MySQL server problem ... Thanks, Eric

  Read the article

• Ruby installed on Ubuntu 10.10 slow on one machine but not other

  - by Aaron Jensen

  I have a machine that was provisioned several months ago. RVM was used to install ruby 1.9.3-p125 as well as 1.9.3-p125-perf. When I compared raw ruby performance to another identical machine the older machine smoked them. For example: ================================================================================ With in-block needle calculation ================================================================================ Rehearsal ---------------------------------------------- detect 3.790000 0.000000 3.790000 ( 3.800895) each 2.410000 0.000000 2.410000 ( 2.420860) any 3.960000 0.000000 3.960000 ( 3.972099) include 1.440000 0.000000 1.440000 ( 1.442862) ------------------------------------ total: 11.600000sec vs ================================================================================ With in-block needle calculation ================================================================================ Rehearsal ---------------------------------------------- detect 10.740000 0.000000 10.740000 ( 10.769366) each 6.080000 0.010000 6.090000 ( 6.106323) any 10.600000 0.000000 10.600000 ( 10.641606) include 4.160000 0.000000 4.160000 ( 4.171530) ------------------------------------ total: 31.590000sec I attempted to reinstall 1.9.3-p125 with rvm on the fast machine and that ruby is now slow. It's as if something changed in RVM, or I installed some package that made compiled versions of ruby perform significantly worse. I know this is a tough question to answer, but what things should I look into in order to track down why the performance has suffered so much? edit I just attempted to install with ruby-build and the version installed was fast. Something rvm is doing to build it in my environment is slow.

  Read the article

• glusterfs mounts get unmounted when 1 of the 2 bricks goes offline

  - by Shiquemano

  I have an odd case where 1 of the 2 replicated glusterfs bricks will go offline and take all of the client mounts down with it. As I understand it, this should not be happening. It should fail over to the brick that is still online, but this hasn't been the case. I suspect that this is due to configuration issue. Here is a description of the system: 2 gluster servers on dedicated hardware (gfs0, gfs1) 8 client servers on vms (client1, client2, client3, ... , client8) Half of the client servers are mounted with gfs0 as the primary, and the other half are pointed at gfs1. Each of the clients are mounted with the following entry in /etc/fstab: /etc/glusterfs/datavol.vol /data glusterfs defaults 0 0 Here is the content of /etc/glusterfs/datavol.vol: volume datavol-client-0 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs0 end-volume volume datavol-client-1 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs1 end-volume volume datavol-replicate-0 type cluster/replicate subvolumes datavol-client-0 datavol-client-1 end-volume volume datavol-dht type cluster/distribute subvolumes datavol-replicate-0 end-volume volume datavol-write-behind type performance/write-behind subvolumes datavol-dht end-volume volume datavol-read-ahead type performance/read-ahead subvolumes datavol-write-behind end-volume volume datavol-io-cache type performance/io-cache subvolumes datavol-read-ahead end-volume volume datavol-quick-read type performance/quick-read subvolumes datavol-io-cache end-volume volume datavol-md-cache type performance/md-cache subvolumes datavol-quick-read end-volume volume datavol type debug/io-stats option count-fop-hits on option latency-measurement on subvolumes datavol-md-cache end-volume The config above is the latest attempt at making this behave properly. I have also tried the following entry in /etc/fstab: gfs0:/datavol /data glusterfs defaults,backupvolfile-server=gfs1 0 0 This was the entry for half of the clients, while the other half had: gfs1:/datavol /data glusterfs defaults,backupvolfile-server=gfs0 0 0 The results were exactly the same as the above configuration. Both configs connect everything just fine, they just don't fail over. Any help would be appreciated.

  Read the article

• Moved servers running Windows Server 2003

  - by Charles

  Our company has two locations and each location has a Windows Server 2003 machine as the DC and several servers, running on two different sub-nets. We are consolidating the locations. I changed the IP address on one of the web servers prior to moving to the main location. I didn't change the IP address on either the DC or the other web servers prior to moving to the main location. Now, only the web server whose IP was changed is able to serve pages. The other web servers are not able to serve pages, cannot be pinged, or be accessed via RDP. Since we don't need the second DC, it has been powered down. When I tried to ping it, the previous IP address was received. My colleague changed the IP address in the DC's DNS, but when I ping it, a timeout error is received. I know that I should have read a lot more before doing this. What can I do to fix it? Thanks, in advance, for your help! Update MarkM, thanks for the info on demoting a DC. That's one of the things I want to do after everything is working. Is there a good, clear article you recommend? Rusty, there are no DMZs involved at this point. I need to set up a DMZ, but that's another project.

  Read the article

• What's the best way to get a stored POP3 password out of Outlook 2007?

  - by Tom Morris

  If you have a password for a POP3 account in Outlook 2007 (Windows 7 Home Premium) and you then forget the password, how do you retrieve it? I tried copy-and-paste. No go. I downloaded Mail PassView, but upon installing it, AVG said it was malware, so I removed it. I eventually found the account details by opening up RegEdit, and found it in HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles\Outlook\ (...) but it was encoded in REG_BINARY. I Googled around and found various Visual Basic routines for decoding it but being a Unix dork I had absolutely no idea what to do with said scripts. By this point, I gave up and managed to get hold of the password by another means (it was written down on a piece of paper in the briefcase of the owner of the account - I know, it makes the inner sysadmin rage). I also attempted to write a simple POP3 server in Python and then get Outlook to log on to it, but that didn't really work out (it was about 4am at that point). For future reference, is there an easy and sensible way of doing this? Is Mail PassView actually evil spyware or was AVG just giving me a false positive? (Any chance of Windows 8 having something like OS X's Keychain?)

  Read the article

• Windows 7 starts getting sluggish over a few days

  - by munrobasher

  Myself and the other developer are running Windows 7 Enterprise 64 bit with 8GB RAM on different Gigabyte motherboards with Quad core Intel CPUs. Most of the time, it runs like a dream. We use VMware workstation a lot (hence the 8GB) and that works well. Except... now and then, after the PCs have been on for a few days, the whole system starts getting really sluggish doing certain tasks. The other's developer's system is far worse than mine with it taking up to a minute to launch IE. Today, mine has gone sluggish but nowhere near as bad. For example, normally when I click on a new tab in IE, it's instant. Today, there's an obvious delay. Right-clicking in this window to trigger iSpell is normally instant, right now it takes about five seconds. I've got resource monitor open on my second monitor and when I did that right-click, there was no obvious peak in CPU, disk or memory. A reboot does fix it so it does sound like a resource issue but haven't a clue what might be to blame. The two computers have similarities (same spec) but also differences (like motherboard, RAM & CPU models). So I guess the question is, any pointers on diagnosing why a PC is sluggish? What could cause such a right-click slow down in IE for example? It sounds like such a simple operation. NOTE: whilst typing this message alone, it was fine performance wise. I can click around the page no problem but right-click still is noticeable slow. Will reboot over lunch... Cheers, Rob.

  Read the article

• how to set up dual wireless routers (G and N) with single broadband connection

  - by user15973

  A local cafe has an 802.11g wireless router attached to either an 8- or 12Mbs broadband connection. Although many customers still have -g devices, an increasing number are showing up with 802.11n devices (e.g. Mac laptops, iPads). The cafe owner is content with his router's area coverage, but he would like for his customers to be able to take advantage of the higher -n download speeds. He could simply replace the -g router with a -n router, but reportedly -n routers slow down considerably when servicing both -g and -n connections. Another option would be to buy the -n router, run an Ethernet cable between the two routers, and (of course) hook up the broadband connection to one of the two routers. Still another option would be to attach an ordinary, wired switch to the broadband connection and then attach both routers to the switch. Aside from the cost issue, what are the tradeoffs of those approaches? Which would you recommend, and why? Is there a better option than the ones I mentioned? Thank you in advance for your advice.

  Read the article

• Which CPU for XEN - LAMP testbed - Budget

  - by deploymonkey

  Dear serverfault knowledgeables, im in a decision dilemma right now, which I can't resolve due to lack of hands on experience. I need to build a testbed for basically virtualizing a LAMP application (os'ses not yet decided) including server side calculations. I'll opt for XEN since it seems better supported by cloud hosters at the moment. The hardware is for a proof of concept for a startup doing saas and might be used for closed live alpha/beta later on. After testing, the testbed might be a) deployed as a colocated white box server b) used as workstation Single socket is enough. We want to have ECC memory for reliability, this excludes most of the consumer line at intel. If intel CPU, then threaded cpu (HT) is preferred have at least 16 gig ram If justified by price and reliability is not too bad, a high quality desktop MB instead of a server MB would be worth a try It came down to the opteron 6128 vs. the xeon 5620 for me after a lot of research, but I don't necessarily have to be right. Which CPU is preferrable, concerning TCO (MB price, power requirements 24/7...) , Opteron 6128 or Xeon 5620? Which one offers better performance in real world applications? (Do You have any other suggestions I probably overlooked?) Thank You for Your consideration

  Read the article

• Varnish does not start properly (crashes after startup) with no error messages

  - by Matthew Savage

  I am running Varnish (2.0.4 from the Ubuntu unstable apt repository, though I have also used the standard repository) in a test environment (Virtual Machines) on Ubuntu 9.10, soon to be 10.04. When I have a working configuration and the server starts successfully it seems like everything is fine, however if, for whatever reason, I stop and then restart the varnish daemon it doesn't always startup properly, and there are no errors going into syslog or messages to indicate what might be wrong. If I run varnish in debug mode (-d) and issue start when prompted then 7 times out of time it will run, but occasionally it will just shut down 'silently'. My startup command is (the $1 allows for me to pass -d to the script this lives in): varnishd -a :80 $1 \ -T 127.0.0.1:6082 \ -s malloc,1GB \ -f /home/deploy/mysite.vcl \ -u deploy \ -g deploy \ -p obj_workspace=4096 \ -p sess_workspace=262144 \ -p listen_depth=2048 \ -p overflow_max=2000 \ -p ping_interval=2 \ -p log_hashstring=off \ -h classic,5000009 \ -p thread_pool_max=1000 \ -p lru_interval=60 \ -p esi_syntax=0x00000003 \ -p sess_timeout=10 \ -p thread_pools=1 \ -p thread_pool_min=100 \ -p shm_workspace=32768 \ -p thread_pool_add_delay=1 and the VCL looks like this: # nginx/passenger server, HTTP:81 backend default { .host = "127.0.0.1"; .port = "81"; } sub vcl_recv { # Don't cache the /useradmin or /admin path if (req.url ~ "^/(useradmin|admin|session|sessions|login|members|logout|forgot_password)") { pipe; } # If cache is 'regenerating' then allow for old cache to be served set req.grace = 2m; # Forward to cache lookup lookup; } # This should be obvious sub vcl_hit { deliver; } sub vcl_fetch { # See link #16, allow for old cache serving set obj.grace = 2m; if (req.url ~ "\.(png|gif|jpg|swf|css|js)$") { deliver; } remove obj.http.Set-Cookie; remove obj.http.Etag; set obj.http.Cache-Control = "no-cache"; set obj.ttl = 7d; deliver; } Any suggestions would be greatly appreciated, this is driving me absolutely crazy, especially because its such an inconsistent behaviour.

  Read the article

• Textmate add multiline text at end of line

  - by Yuval

  In Textmate, I am able to add text to several lines at once by clicking and holding the Option key and dragging with the mouse. say I have the following lines: foo 1: foo 2: foo 3: I can easily click and hold option and then drag down with the lines to select the text at the end of each line, and then type "bar" once and it will be added to all lines, as such: foo 1: bar foo 2: bar foo 3: bar Fantastic. The problem I run into, is when my lines aren't the same length, as such foo 19: foo 37842342346: foo 503: Now if I want to add text to the end of each line, I have to either do it manually, or choose enough space so that the longest line is not overwritten, as such: foo 19: bar foo 37842342346: bar foo 503: bar This results in a lot of unwanted whitespace in lines that don't need it. Granted, I could easily run a regular expression search to replace all multiple occurrences of a space with a single one, but I was wondering if there's a way to select all ending of lines at once without having to do that. Any idea? Thanks!

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• Diagnose remote desktop freezes in Windows 7 when no BSOD?

  - by Paul Smith

  Okay, I'm getting no joy from Asus or Microsoft on this, so hoping for some clues on how to narrow down the cause. I have very frequent OS freezes, always & only when running Remote Destkop Client (mstsc) in Windows 7 x64. I never have a bluescreen, and there is never a minidump. The display & input just freezes -- no keyboard, no mouse, and sound will just continue the last wavelength if any. So far, I can't find a way to trap the hang given that there's no bluescreen; advanced startup & recovery settings for system failure are "Write an event" checked, "Automatically restart" checked, and "Kernel memory dump". I've updated to the lasted BIOS, and tried a few different graphics drivers, both generic & ATI. I've also tried disabling Aero, and everything about the remote desktop experience (incrementally unchecked every box in the mstsc - options - experience tab), even disabled/unplugged external monitor to make sure it wasn't a dual-monitor issue. My specs are: Asus G73jh notebook 8GB RAM ATI Mobility Radeon HD 5800 Series graphics (recently tried driver versions 8.791.0.0, 8.801.0.0) American Megatrends G73jh.211 BIOS (7/27/2010) Windows 7 Home Premium x64 Windows Memory Diagnostic passed all of the following at least 3 times with no errors: MATS+ INVC LRAND Stride6 WMATS+ WINVC This notebook is better than most at removing heat (laudable vent design), so I'm not inclined to suspect thermal causes (especially since running 1080p video for hours has never caused a freeze, but mstsc does, reliably, within 5 minutes to an hour). This did seem to start happening after a Windows Update, but I've since reverted every patch applied since a week before the first occurrence, with no joy. (And I'd only had the PC for a couple weeks before that, so it could have been chance + less actual time spent remoting at the beginning.) I'm at my wits end, and I bought this laptop primarily as a remote terminal client (go figure, right?) Any ideas on how to identify the cause of this? Thanks!

  Read the article

• Shoretel Upgrade Path

  - by Brian

  I currently have a Shoretel Server running Server 2003 x32 as a virtual machine paired with a ShoreGear 90 switch and another unused switch of the same model being reserved for manual failover. I am getting the software mailed to me from my partner, but with limited support since the server is in a relatively remote area. I am tempted to upgrade the OS at the same time as performing the upgrade, but want to know if there are any horror stories or advice I should know about before diving in. I'm upgrading from Shoretel 9.2 Build. I will be upgrading first to version 10.1 then finally to 11.1. The system has been bullet proof since it was installed and we are upgrading mainly to get a client that is a little more modern. My question boils down to: Should I even bother with an OS upgrade or even possibly a fresh install of Windows with an install of Shoretel 11.1 and just transfer the configuration? Should I just stay with Server 2003 since it is supported in my target version of Shoretel and the upgrade will be more than enough to keep me busy as a novice?

  Read the article

• URL autocomplete no longer working in Chrome

  - by Yuji Tomita

  The browser URL autocomplete has started behaving differently starting yesterday. I used to access my top urls by typing the first one or two letters of a URL then pressing enter. Now, I have to visually fish for the right one and push the down arrow to select the url. Big difference. Anybody know if I can get the old functionality back somehow? Have I messed a setting? Example of how my browser used to work: Gmail.com: CMD + L Type G Enter Stackoverflow.com CMD + L Type S Enter Normally, the browser bar would already be highlighted with gmail.com after typing the first g. It would narrow the matches depending on what characters were typed next, or simply go to it if I pressed enter. UPDATE: I just realized my history tab looks suspicious. No entries But clearly Chrome is pulling some data from my history, as I have very personalized recommendations when typing in a letter. UPDATE: Fixed! Saved my bookmarks, removed my ~/Library/Application\ Support/Google/Default directory (careful, it looks like absolutely everything is stored here) restarted chrome, and within one visit to Gmail.com, my autocomplete was filling in my URLs like so: Beautiful.

  Read the article

• iptables, blocking large numbers of IP Addresses

  - by Twirrim

  I'm looking to block IP addresses in a relatively automated fashion if they look to be 'screen scraping' content from websites that we host. In the past this was achieved by some ingenious perl scripts and OpenBSD's pf. pf is great in that you can provide it nice tables of IP addresses and it will efficiently handle blocking based on them. However for various reasons (before my time) they made the decision to switch to CentOS. iptables doesn't natively provide the ability to block large numbers of addresses (I'm told it wasn't unusual to be blocking 5000+), and I'm a bit cautious over adding that many rules into an iptable. ipt_recent would be awesome for doing this, plus it provides a lot of flexibility for just severely slowing down access, but there is a bug in the CentOS kernel that is stopping me from using it (reported, but awaiting fix). Using ipset would entail compiling a more up-to-date version of iptables than comes with CentOS which whilst I'm perfectly capable of doing it, I'd rather not do from a patching, security and consistency perspective. Other than those two it looks like nfblock is a reasonable alternative. Is anyone aware of other ways of achieving this? Are my concerns about several thousand IP addresses in iptables as individual rules unfounded?

  Read the article

• Is there an application to log component temperatures to file?

  - by MrVimes

  I purchased a computer a month or two ago (core i7, 24gb ram, geforce gtx 590, windows 7 ultimate). Within the last week it began to bluescreen regularly. I tried lots of things (check hds, check memory, reinstall windows etc..) but it still bluescreened. At the time my temps were as follows... CPU - aprox 40/50c. GPU - arpox 60 idle, aprox 90 during heavy use. HDDs - aprox 55c after the PC had been on a while. I thought the 55c was ok, but I have since realized it was probably too high and may have been the direct cause of the bluescreening. I've installed a spare fan I had in the front of the PC blowing air in, (so there's airflow from front to back) Since then, obviously, all my temps are down. Especially the HDDs - three of them reach 30c and one has been up to 47c (it is some distance away from the airflow, in one of the 5.25inch drive bays) I haven't had the PC on for as long as it would normally take to bluescreen yet, but If it does I want to know what all the temps were right before the bluescreen. I have tried Everest but it only shows me realtime temps or gives me the ability to create one-off reports. I want something that can record all the temps to a file at 30 seconds intervals. If the computer bluescreens I can load it up again and check the last entry in the file. Side question: Am I right in thinking 55c was far too hot for a HDD? (It might have got higher than that before the bluescreens.. I don't know) Another side question: Is 47c too high? This is actually why I am asking the main question - I am concerned that this one drive that isn't getting the benefit of the extra fan may still cause the computer to bluescreen.

  Read the article

• Can't install Hyper-V in Windows 8 Pro. Causes boot loop, pain & suffering

  - by Nick

  Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated.

  Read the article

• Magical moving desktop icons

  - by Nathan Taylor

  I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Zaslavsky

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Preventing endless forwarding with two routers

  - by jarmund

  The network in quesiton looks basically like this: /----Inet1 / H1---[111.0/24]---GW1---[99.0/24] \----GW2-----Inet2 Device explaination H1: Host with IP 192.168.111.47 GW1: Linux box with IPs 192.168.111.1 and 192.168.99.2, as well as its own route to the internet. GW2: Generic wireless router with IP 192.168.99.1 and its own route to the internet. Inet1 & Inet2: Two possible routes to the internet In short: H has more than one possible route to the internet. H is supposed to only access the internet via GW2 when that link is up, so GW1 has some policy based routing special just for H1: ip rule add from 192.168.111.47 table 991 ip route add default via 192.168.99.1 table 991 While this works as long as GW2 has a direct link to the internet, the problem occurs when that link is down. What then happens is that GW2 forwards the packet back to GW1, which again forwards back to GW2, creating an endless loop of TCP-pingpong. The preferred result would be that the packet was just dropped. Is there something that can be done with iptables on GW1 to prevent this? Basically, an iptables-friendly version of "If packet comes from GW2, but originated from H1, drop it" Note1: It is preferable not to change anything on GW2. Note2: H1 needs to be able to talk to both GW1 and GW2, and vice versa, but only GW2 should lead to the internet TLDR; H1 should only be allowed internet access via GW2, but still needs to be able to talk to both GW1 and GW2. EDIT: The interfaces for GW1 are br0.105 for the '99' network, and br0.111 for the '111' network. The sollution may or may not be obnoxiously simple, but i have not been able to produce the proper iptables syntax myself, so help would be most appreciated. PS: This is a follow-up question from this question

  Read the article

< Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >