Search Results

Search found 18379 results on 736 pages for 'output buffering'.

Page 532/736 | < Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >

• Windows 7 migration led to crashdump and hibernate problems

  - by MartyMacGyver

  Note: I'm using a Samsung 830 SSD (migrated OS from defunct PC) and other than these two (interrelated?) problems it's working fine. Surprisingly well actually. Motherboard is a ASUS P8Z77-V Deluxe. Problem 1: Crashdumps are not working. volmgr throws an event 45 "The system could not sucessfully load the crash dump driver." whenever you modify crashdump settings, or if a crashdump occurs. diskpart says that "Crashdump disk = no" which is peculiar. Problem 2: Hibernation isn't working. Again, volmgr throws the same event 45 if you try to hibernate. The screen blanks, then you're at the password prompt. No sleepage occurs. (Yes, I know I should avoid hibernation on SSDs but it's enabled and the hibernation file is definitely there so I'd like to know why it's failing). Diskpart claims "Hibernation file = no" which is again peculiar... it's plainly there and getting created by the system. The common factor appears to be volmgr and/or the crashdump "service" (if that's what it is). I'd much rather get this working than spend days reinstalling and reconfiguring the entire system, especially when it's working perfectly otherwise. Sleep works as well (as long as it's not hybrid sleep). So, what defines the flags "Crashdump disk" and "Hibernation file disk" in diskpart's output? And what might be going wrong that's breaking crashdumps in particular?

  Read the article

• Problem with switch dell 6224

  - by Matias

  Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

  Read the article

• Validating signature trust with gpg?

  - by larsks

  We would like to use gpg signatures to verify some aspects of our system configuration management tools. Additionally, we would like to use a "trust" model where individual sysadmin keys are signed with a master signing key, and then our systems trust that master key (and use the "web of trust" to validate signatures by our sysadmins). This gives us a lot of flexibility, such as the ability to easily revoke the trust on a key when someone leaves, but we've run into a problem. While the gpg command will tell you if a key is untrusted, it doesn't appear to return an exit code indicating this fact. For example: # gpg -v < foo.asc Version: GnuPG v1.4.11 (GNU/Linux) gpg: armor header: gpg: original file name='' this is a test gpg: Signature made Fri 22 Jul 2011 11:34:02 AM EDT using RSA key ID ABCD00B0 gpg: using PGP trust model gpg: Good signature from "Testing Key <[email protected]>" gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: ABCD 1234 0527 9D0C 3C4A CAFE BABE DEAD BEEF 00B0 gpg: binary signature, digest algorithm SHA1 The part we care about is this: gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. The exit code returned by gpg in this case is 0, despite the trust failure: # echo $? 0 How do we get gpg to fail in the event that something is signed with an untrusted signature? I've seen some suggestions that the gpgv command will return a proper exit code, but unfortunately gpgv doesn't know how to fetch keys from keyservers. I guess we can parse the status output (using --status-fd) from gpg, but is there a better way?

  Read the article

• Large virtual memory size of ElasticSearch JVM

  - by wfaulk

  I am running a JVM to support ElasticSearch. I am still working on sizing and tuning, so I left the JVM's max heap size at ElasticSearch's default of 1GB. After putting data in the database, I find that the JVM's process is showing 50GB in SIZE in top output. It appears that this is actually causing performance problems on the system; other processes are having trouble allocating memory. In asking the ElasticSearch community, they suggested that it's "just" filesystem caching. In my experience, filesystem caching doesn't show up as memory used by a particular process. Of course, they may have been talking about something other than the OS's filesystem cache, maybe something that the JVM or ElasticSearch itself is doing on top of the OS. But they also said that it would be released if needed, and that didn't seem to be happening. So can anyone help me figure out how to tune the JVM, or maybe ElasticSearch itself, to not use so much RAM. System is Solaris 10 x86 with 72GB RAM. JVM is "Java(TM) SE Runtime Environment (build 1.7.0_45-b18)".

  Read the article

• GNU screen, how to get current sessionname programmably

  - by Jimm Chen

  [ This can be considered step 2 of my previous question Is it possible to change GNU screen session name after created? ] Actually, I'd like to write a script that can display current screen session name and change current session name. For example: sren armcross It will change the session name to armcross (ARM gcc cross compiler) and output something like: screen session name changed from '25278.pts-15.linux-ic37' to 'armcross' So, the key question now is how to get current session name. Not only for display the old session name, but according to Is it possible to change GNU screen session name after created? , I have to know it(pass to -d -r) before I can change it to something else. Can we use $STY for current session name? No. $STY will not change after you have changed the session name to a user-defined one. However, for command screen -d -r <oldsessname> -X sessionname armcross should be the user-defined name(if ever defined) instead of $STY, otherwise, screen spouts error "No screen session found." Maybe, there is a verbose way, use screen -list to list all sessions(user-defined name listed), then, match the pid part from $STY against those listed sessions and we will find current session's user-defined name. It should not be so verbose for such a straightforward question. Don't you think so? The -d -D and -r -R options seems to expose too much implementation detail to screen's user. It seems, to rename a session, you have to detach it, then do the rename, then reattach it. Right? My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06 Thank you.

  Read the article

• PPTP Client setup, Fedora 17

  - by Suarez Romina

  I am trying to connect to hidemyass.com VPN services via PPTP, but I am having issues understanding why it isn't working, since I don't get a warning or fatal error and my IP remains the same. This is how i create the connection: [root@lasvegas-nv-datacenter ~]# pptpsetup --create TUNNELNAME --server 199.58.165.20 --username MYUSERNAME --password MYPASSWORD --encrypt --start And this is the output: Using interface ppp0 Connect: ppp0 <-- /dev/pts/1 CHAP authentication succeeded MPPE 128-bit stateless compression enabled local IP address 10.200.21.14 remote IP address 10.200.20.1 After that, I check the log and this is what i get: [root@lasvegas-nv-datacenter ~]# tail -f /var/log/messages Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_rep:pptp_ctrl.c:254]: Sent control packet type is 1 'Start-Control-Connection-Request' Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:754]: Received Start Control Connection Reply Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:788]: Client connection established. Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_rep:pptp_ctrl.c:254]: Sent control packet type is 7 'Outgoing-Call-Request' Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:873]: Received Outgoing Call Reply. Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:912]: Outgoing call established (call ID 0, peer's call ID 20096). Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: CHAP authentication succeeded Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: MPPE 128-bit stateless compression enabled Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: local IP address 10.200.21.14 Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: remote IP address 10.200.20.1 Can someone help me? Basically, i Ieed to connect to the VPN and have my IP changed after the connection. I read a lot of guides but still cannot understand why I don't get a connection.

  Read the article

• Bad Blocks Exist in Virtual Device PERC H700 Integrated

  - by neoX

  I have a DELL server with PERC H700 Integrated controller. I've made RAID5 with 12 harddrives and the virtual device is in Optimal state, but I receive such errors under linux: sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bc e0 00 00 01 00 00 00 end_request: I/O error, dev sda, sector 30640487648 But all disk are in Firmware state: Online, Spun Up. Also there is not a single ATA read or write error in any disk in the raid (I check them with smartctl -a -d sat+megaraid,N -H /dev/sda). The only strange thing is in the output in megacli: megacli -LDInfo -L0 -a0 ... Bad Blocks Exist: Yes How could there be bad blocks in a Virtual Drive, which is in optimal state and no disk is broken or even with a single error? I tried "Consistency Check", but it finished successfully and the errors are still in dmesg. Could Someone help me to figure it out what is wrong with my raid?

  Read the article

• High load average, low CPU and IO (Centos 5.7)

  - by Ben

  A Drupal 7 site with CiviCRM, after running smoothly for a year on a 1&1 VPS suddenly became unresponsive. Now pages eventually load, but can take more than a minute. Looking at resource use in Virtuozzo, the load average carries a warning, and has remained above 1. While I understand this isn't particularly high, this is a change from when the site was working. Here is a typical snapshot of top: top - 03:10:32 up 3:21, 1 user, load average: 1.16, 1.22, 1.30 Tasks: 43 total, 1 running, 42 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.1%sy, 0.1%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097152k total, 1015112k used, 1082040k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached CPU idle level never seems to go much below 70%. wa is virtually always at 0. There appears to be lots of free memory. And here is some vmstat output, again showign wa at 0, plenty of free memory, and an idle CPU: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 1100872 0 0 0 0 2783 23672 0 538 1 0 99 0 0 1 0 0 1100872 0 0 0 0 0 16 0 101754 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 17 0 103133 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 102080 0 0 100 0 0 1 0 0 1100872 0 0 0 0 0 6 0 99881 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 105187 0 0 100 0 0 I've spoken to 1&1 but they don't have any ideas as to what could be causing the high load average. Instead they suggested an upgrade :) I've looked for processes that might be causing this, examined MySQL showprocesslist, and restarted the container with no result. Does anyone have more troubleshooting suggestions or insights?

  Read the article

• 'pskill \\hostname winlogon' might budge a server "stuck rebooting", but why?

  - by Snoi

  Question: Executing remote (Sysinternals) command... pskill \\machine winlogon ...can budge a server that is stuck rebooting, but how/why does this work? How do you know which service to kill? To recreate (e.g.): You run Windows Update, allow a reboot, and ...NOTHING! RDP gets cut off but the server does not reboot. Just about every other service seems to stay up. Further Background: I've faced this problem on VMs hosted around the planet for some years, and used various sc.exe and shutdown commands to learn the state of and attempt remote reboot of servers in such a state, with limited success. Most datacentres don't offer any way to see the true console or power off/on such machines. They charge $$ for you to call them to do such simple things after hours, when you nearly always have to run your maint tasks. e.g. NET USE \\machine\IPC$ /USER:login password sc \\machine query RpcSs sc \\machine query TermService sc \\machine query wuauserv tasklist /s machine This occasionally works for me... shutdown /m \\machine /r /f /t: 0 ...but more often than not it fails with: A system shutdown is in progress (1115). I found this question, and the answer by @Tweek, and it worked really well, but was I just lucky? Can not RDP to Win 2003 box or initiate remote restart @Tweek said to run: pskill \\hostname winlogon ...and that got me past this situation in a new way (Server 2008 R2 in my most recent case) - really useful! I just need to understand if I got lucky or there is more science here. What I'd like to know is why the winlogon process? @Livne said to use "tasklist /s HostName" to see what is the culprit, but how do you tell from the listed output? It's just a list of running tasks etc. From that I would not know what to look for, nor could I see anything about the winlogon process that suggested to my eyes that was the one to kill.

  Read the article

• Attempting to update Amazon Route53 using a script, but domain is not being updated

  - by ks78

  I have several Amazon EC2 instances, running Ubuntu 10.04, with which I'd like to use Amazon's Route53. I setup a script as described in Shlomo Swidler's article, but I'm still missing something. When the script runs, it doesn't return any output, which I initially assumed meant it ran correctly. However, when I check the DNS records using MyR53DNS, there are no entries for my instances. Here's my script: #!/bin/tcsh -f set root=`dirname $0` setenv EC2_HOME /usr/lib/ec2-api-tools setenv EC2_CERT /etc/cron.route53/ec2_x509_cert.pem setenv EC2_PRIVATE_KEY /etc/cron.route53/ec2_x509_private.pem setenv AWS_ACCESS_KEY_ID myaccesskeyid setenv AWS_SECRET_ACCESS_KEY mysecretaccesskey /user/bin/ec2-describe-instances | \ perl -ne '/^INSTANCE\s+(i-\S+).*?(\S+\.amazonaws\.com)/ \ and do { $dns = $2; print "$1 $dns\n" }; /^TAG.+\sShortName\s+(\S+)/ \ and print "$1 $dns\n"' | \ perl -ane 'print "$F[0] CNAME $F[1] --replace\n"' | \ xargs -n 4 $/etc/cron.route53/cli53/cli53.py \ rrcreate -x 60 mydomain.com Does anyone see a problem with this script? If its not the script, what else could be preventing my Route53 domain from being updated? I am using the Security Groups to IP-restrict the instances. I've tried opening port 53, but that didn't seem to have an effect. Is there another port that Route53 uses? I'd appreciate any help or guidance the ServerFault community can offer. Let me know if you need any further info.

  Read the article

• unlinked libraries in a makefile?

  - by wyatt

  I'm trying to install a libspopc, but when I run the make I get the following output: cc -Wall -Wextra -pedantic -pipe -fPIC -Os -DUSE_SSL -c session.c cc -Wall -Wextra -pedantic -pipe -fPIC -Os -DUSE_SSL -c queries.c cc -Wall -Wextra -pedantic -pipe -fPIC -Os -DUSE_SSL -c parsing.c cc -Wall -Wextra -pedantic -pipe -fPIC -Os -DUSE_SSL -c format.c cc -Wall -Wextra -pedantic -pipe -fPIC -Os -DUSE_SSL -c objects.c cc -Wall -Wextra -pedantic -pipe -fPIC -Os -DUSE_SSL -c libspopc.c rm -f libspopc*.a ar r libspopc-0.9n.a session.o queries.o parsing.o format.o objects.o libspopc.o ar: creating libspopc-0.9n.a ranlib libspopc-0.9n.a ln -s libspopc-0.9n.a libspopc.a rm -f libspopc*.so cc -o libspopc-0.9n.so -shared session.o queries.o parsing.o format.o objects.o libspopc.o ln -s libspopc-0.9n.so libspopc.so cc -o poptest1 -Wall -Wextra -pedantic -pipe -fPIC -Os -DUSE_SSL examples/poptest1.c -L. -lspopc -lssl -lcrypto /usr/local/lib/libcrypto.a(dso_dlfcn.o): In function `dlfcn_globallookup': dso_dlfcn.c:(.text+0x2d): undefined reference to `dlopen' dso_dlfcn.c:(.text+0x43): undefined reference to `dlsym' dso_dlfcn.c:(.text+0x4d): undefined reference to `dlclose' /usr/local/lib/libcrypto.a(dso_dlfcn.o): In function `dlfcn_pathbyaddr': dso_dlfcn.c:(.text+0x8f): undefined reference to `dladdr' dso_dlfcn.c:(.text+0xe9): undefined reference to `dlerror' /usr/local/lib/libcrypto.a(dso_dlfcn.o): In function `dlfcn_bind_func': dso_dlfcn.c:(.text+0x491): undefined reference to `dlsym' dso_dlfcn.c:(.text+0x570): undefined reference to `dlerror' /usr/local/lib/libcrypto.a(dso_dlfcn.o): In function `dlfcn_bind_var': dso_dlfcn.c:(.text+0x5f1): undefined reference to `dlsym' dso_dlfcn.c:(.text+0x6d0): undefined reference to `dlerror' /usr/local/lib/libcrypto.a(dso_dlfcn.o): In function `dlfcn_unload': dso_dlfcn.c:(.text+0x735): undefined reference to `dlclose' /usr/local/lib/libcrypto.a(dso_dlfcn.o): In function `dlfcn_load': dso_dlfcn.c:(.text+0x817): undefined reference to `dlopen' dso_dlfcn.c:(.text+0x88e): undefined reference to `dlclose' dso_dlfcn.c:(.text+0x8d5): undefined reference to `dlerror' collect2: ld returned 1 exit status make: *** [poptest1] Error 1 A quick search suggested that this was due to libdl being unlinked, though this seems unlikely in a distributed library, particularly a seemingly relatively popular one. Could anything else be causing this? And if it is due to an unlinked library, how would I go about fixing it? Thanks

  Read the article

• Mysql: Disk is full writing

  - by elma

  Hi there, I'm having some problems with my mysql server lately, so I've decided to check the error logs: [root@LSN-D1179 log]# tail -10 mysqld.log 100325 19:30:03 [ERROR] /usr/libexec/mysqld: Table './lfe/actions' is marked as crashed and should be repaired 100325 19:30:03 [ERROR] /usr/libexec/mysqld: Table './lfe/actions' is marked as crashed and should be repaired 100325 19:30:18 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_task_logs.MYD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs 100325 19:34:34 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_profile_portal_views.MYD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs 100325 19:39:46 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_posts.TMD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs 100325 19:40:18 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_task_logs.MYD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs 100325 19:44:34 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_profile_portal_views.MYD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs 100325 19:49:46 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_posts.TMD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs 100325 19:50:18 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_task_logs.MYD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs 100325 19:54:34 [ERROR] /usr/libexec/mysqld: Disk is full writing './omuz/ibf_profile_portal_views.MYD' (Errcode: 122). Waiting for someone to free space... Retry in 60 secs And here's is my df -h output [root@LSN-D1179 log]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 143G 6.2G 129G 5% / /dev/sda1 99M 12M 83M 13% /boot tmpfs 490M 0 490M 0% /dev/shm As you can see, I have plenty of free space; so I couldn't figure out these "Disk is full" errors in mysqld.log. Does anyone know what should I do to fix this? Ugur

  Read the article

• Scheduled tasks fail to start unless I'm logged in to the server

  - by Chuck

  Tasks need to open a CMD window and pass net use commands, then do a DIR command, pipping the output to a file on the server. Log in as either me (Sysadmin) or with one of the system accounts and task will only run if I'm physically logged into the server. Run as batch file is set in security properties for both users (me and service account), security is granted to all directories, etc. It almost acts like a scheduled task, since it is not physically connected to a display can't create a CMD window and pass the WinID so the command can be sent. I'm guessing. Anyone know of a document that explains how the server handles initiation of a window if done via scheduled task and no attached user is associated with the task? If I log onto the box and run the scheduled tasks they run fine, but produce no errors or event log entries and then just show that it ran successfully and sets the next run time. Have tried both with the run if logged in checkbox on and off and makes no difference. Other tasks work fine, except that they are acting on local drives with no display writing or updating taking place, so I'm guessing the system either can't instantiate a window if no display is connected to a logged on user, or it can't establish a point if it is trying to create a virtual screen. You'd think it is just creating a memory map and then mapping it to a device to display, but that doesn't seem to be the case, but I can find no documentation on how the system handles a scheduled task and how to invoke a fake or virtual screen that it could write to so it appears that a user was connected. Thanks This is driving me nuts and I've tried everything I can think of as well as our network boys ideas and nothing seems to work.

  Read the article

• Why do weekly tasks created via PowerShell using a different user fail with error 0x41306

  - by Danny Tuppeny

  We have some scripts that create scheduled jobs using PowerShell as part of our application. When testing them recently, I noticed that some of them always failed immediately, and no output is ever produced (they don't even appear in the Get-Job list). After many days of tweaking, we've managed to isolate it to any jobs that are set to run weekly. Below is a script that creates two jobs that do exactly the same thing. When we run this on our domain, and provide credentials of a domain user, then force both jobs to run in the Task Scheduler GUI (right-click - Run), the daily one runs fine (0x0 result) and the weekly one fails (0x41306). Note: If I don't provide the -Credential param, both jobs work fine. The jobs only fail if the task is both weekly, and running as this domain user. I can't find information on why this is happening, nor think of any reason it would behave differently for weekly jobs. The "History£ tab in the Task Scheduler has almost no useful information, just "Task stopping due to user request" and "Task terminated", both of which have no useful info: Task Scheduler terminated "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" instance of the "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" task. Task Scheduler stopped instance "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" of task "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" as request by user "MyDomain\SomeUser" . What's up with this? Why do weekly tasks run differently, and how can I diganose this issue? This is PowerShell v3 on Windows Server 2008 R2. I've been unable to reproduce this locally, but I don't have a user set up in the same way as the one in our production domain (I'm working on this, but I wanted to post this ASAP in the hope someone knows what's happening!). Import-Module PSScheduledJob $Action = { "Executing job!" } $cred = Get-Credential "MyDomain\SomeUser" # Remove previous versions (to allow re-running this script) Get-ScheduledJob Test1 | Unregister-ScheduledJob Get-ScheduledJob Test2 | Unregister-ScheduledJob # Create two identical jobs, with different triggers Register-ScheduledJob "Test1" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Weekly -At 1:25am -DaysOfWeek Sunday) Register-ScheduledJob "Test2" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Daily -At 1:25am)

  Read the article

• snort with barnyard2 not working on Fedora 12

  - by aHunter

  Has anyone come across this error with barnyard2 and snort? --== Initializing Barnyard2 ==-- Initializing Input Plugins! Initializing Output Plugins! Parsing config file "/etc/snort/barnyard2.conf" Log directory = /var/log/barnyard2 database: compiled support for (mysql) database: configured to use mysql database: schema version = 107 database: host = localhost database: user = test database: database name = snort database: sensor name = localhost:eth0 database: sensor id = 1 database: data encoding = hex database: detail level = full database: ignore_bpf = no database: using the "log" facility --== Initialization Complete ==-- ______ -*> Barnyard2 <*- / ,,_ \ Version 2.1.8 (Build 251) |o" )~| By the SecurixLive.com Team: http://www.securixlive.com/about.php + '''' + (C) Copyright 2008-2010 SecurixLive. Snort by Martin Roesch & The Snort Team: http://www.snort.org/team.html (C) Copyright 1998-2007 Sourcefire Inc., et al. WARNING: Ignoring corrupt/truncated waldofile '/var/log/snort/barnyard.waldo' Opened spool file '/var/log/snort/snort.log.1282004944' ERROR: Unknown record type read: 104 Fatal Error, Quitting.. Snort seems to be working correctly as I have managed to get logs via syslog but when I try to use the barnyard config via Unified2 it is not working. Presumably because of the above error. Thanks in advance.

  Read the article

• Cachefilesd (cachefiles) everything seems to be set up, still not working

  - by Evgenius

  I'm trying to set up cachefilesd to work with my network folder shared using NFS. I have seemingly everything set up, however cachefilesd starts normally, however caching isn't functioning. Here is output of commands, which I ran in the same order 1 sudo mount ... cache-1:/mnt/datashared on /mnt/nfsshare type nfs (rw,sync,ac,acregmin=3,acregmax=60,acdirmin=30,acdirmax=300,lookupcache=pos,vers=3,fsc) ... 2 lsbmod | grep cachefiles cachefiles 40555 1 fscache 57430 4 nfs,cifs,cachefiles,nfsv4 3 [edited - deleted] 4 uname -r 3.8.0-34-generic 5 grep CONFIG_NFS_FSCACHE /boot/config-3.8.0-34-generic CONFIG_NFS_FSCACHE=y 6 lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring 7 sudo service cachefilesd restart * Restarting FilesCache daemon cachefilesd [ OK ] 8 dmesg [6211206.141781] FS-Cache: Withdrawing cache "mycache" [6211210.135236] FS-Cache: Cache "mycache" added (type cachefiles) [6211210.135242] CacheFiles: File cache on sdb1 registered [6214644.348929] CacheFiles: File cache on sdb1 unregistering [6214644.348935] FS-Cache: Withdrawing cache "mycache" [6214654.575909] FS-Cache: Cache "mycache" added (type cachefiles) [6214654.575915] CacheFiles: File cache on sdb1 registered 9 ps aux | grep cachefilesd root 65399 0.0 0.0 4460 540 ? Ss 23:14 0:00 /sbin/cachefilesd 1000 65464 0.0 0.0 8160 916 pts/0 S+ 23:16 0:00 grep --color=auto cachefilesd finally, biggest problem is 10 cat /proc/fs/nfsfs/volumes NV SERVER PORT DEV FSID FSC v3 64476645 801 0:24 233e020f0da07a93 no tl;dr I think I configured everything properly but FSC mount option + fscachefilesd don't seem to work

  Read the article

• ./rtnet start rteth0-mac: unknown interface: No such device ioctl: No such device

  - by Anisha Kaul

  I have installed the RTnet over Xenomai. RTnet compiled well, and I also tested loopback on the single machine and was able to ping. However I noticed ./rtnet start showing the following output: What should I interpret when all it says is "no such device"? What more info should I provide here for you to help me in getting rid of this error? linux-y3pi:/usr/local/rtnet/sbin # ./rtnet start rteth0: unknown interface: No such device rteth0-mac: unknown interface: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl (add): No such device vnic0: unknown interface: No such device SIOCSIFADDR: No such device vnic0: unknown interface: No such device SIOCSIFNETMASK: No such device Waiting for all slaves...ioctl: No such device ioctl: No such device linux-y3pi:/usr/local/rtnet/sbin # lsmod: linux-y3pi:/usr/local/rtnet/sbin # lsmod Module Size Used by tdma 18281 0 rtmac 9274 1 tdma rtcfg 49485 0 rtcap 7216 0 rt_loopback 1563 2 rtpacket 5517 0 rtudp 10655 0 rt_8139too 11374 0 rtipv4 22842 2 rtcfg,rtudp rtnet 42130 9 tdma,rtmac,rtcfg,rtcap,rt_loopback,rtpacket,rtudp,rt_8139too,rtipv4 ip6t_LOG 8480 6 xt_tcpudp 3540 2 xt_pkttype 1176 3 ipt_LOG 8201 6 xt_limit 2159 12 snd_pcm_oss 44878 0 snd_mixer_oss 15151 1 snd_pcm_oss snd_seq 55731 0 s nd_seq_device 6698 1 snd_seq edd 8407 0 ip6t_REJECT 4306 3 nf_conntrack_ipv6 8186 4 nf_defrag_ipv6 10128 1 nf_conntrack_ipv6 ip6table_raw 1451 1 xt_NOTRACK 1112 4 ipt_REJECT 2397 3 xt_state 1314 8 iptable_raw 1478 1 iptable_filter 1706 1 ip6table_mangle 1756 0 nf_conntrack_netbios_ns 1678 0 nf_conntrack_ipv4 8957 4 nf_conntrack 80411 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4 nf_defrag_ipv4 1561 1 nf_conntrack_ipv4 ip_tables 18872 2 iptable_raw,iptable_filter ip6table_filter 1679 1 ip6_tables 19066 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter x_tables 24094 16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables fuse 69279 3 loop 17417 0 dm_mod 71671 0 snd_hda_codec_via 57768 1 snd_hda_intel 24871 2 snd_hda_codec 95006 2 snd_hda_codec_via,snd_hda_intel snd_hwdep 6540 1 snd_hda_codec snd_pcm 90716 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec snd_timer 22050 2 snd_seq,snd_pcm snd 71410 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 7854 1 snd iTCO_wdt 11716 0 iTCO_vendor_support 2942 1 iTCO_wdt snd_page_alloc 8324 2 snd_hda_intel,snd_pcm sr_mod 13186 0 cdrom 37628 1 sr_mod i2c_i801 9677 0 pcspkr 1950 0 sg 28847 0 serio_raw 4534 0 ext4 361361 2 jbd2 82943 1 ext4 crc16 1699 1 ext4 i915 500199 2 drm_kms_helper 33537 1 i915 drm 211193 3 i915,drm_kms_helper sd_mod 33977 5 i2c_algo_bit 5625 1 i915 intel_agp 11529 1 i915 intel_gtt 16397 3 i915,intel_agp ata_generic 3787 0 ata_piix 22875 4 ahci 20097 0 libahci 22089 1 ahci libata 194812 4 ata_generic,ata_piix,ahci,libahci scsi_mod 204709 4 sr_mod,sg,sd_mod,libata linux-y3pi:/usr/local/rtnet/sbin #

  Read the article

• Linux bizarre memory report

  - by Igor Liner

  I took the following meminfo captures. I don't figure out how the free memory went from 8GB to almost 25GB, when only about 4GB of slab was freed. There was no change of the proccess memory consumption on time the meminfo output was taken. First meminfo with 8GB free memory: MemTotal: 66054256 kB MemFree: 8344960 kB Buffers: 1120 kB Cached: 30172312 kB SwapCached: 0 kB Active: 10795428 kB Inactive: 1914512 kB Active(anon): 10193124 kB Inactive(anon): 1441288 kB Active(file): 602304 kB Inactive(file): 473224 kB Unevictable: 26348912 kB Mlocked: 26348960 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 8886304 kB Mapped: 26383052 kB Shmem: 29097904 kB Slab: 6006384 kB SReclaimable: 3512404 kB SUnreclaim: 2493980 kB KernelStack: 15240 kB PageTables: 78724 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 33027128 kB Committed_AS: 44446908 kB VmallocTotal: 34359738367 kB VmallocUsed: 426656 kB VmallocChunk: 34325375716 kB HardwareCorrupted: 0 kB AnonHugePages: 7696384 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 6144 kB DirectMap2M: 2058240 kB DirectMap1G: 65011712 kB Second memory capture with almost 25GB free memory: MemTotal: 66054256 kB MemFree: 24949116 kB Buffers: 1120 kB Cached: 29085016 kB SwapCached: 0 kB Active: 10168904 kB Inactive: 1461156 kB Active(anon): 10168216 kB Inactive(anon): 1441956 kB Active(file): 688 kB Inactive(file): 19200 kB Unevictable: 26317328 kB Mlocked: 26317376 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 8861224 kB Mapped: 26351488 kB Shmem: 29066248 kB Slab: 1503440 kB SReclaimable: 232880 kB SUnreclaim: 1270560 kB KernelStack: 15256 kB PageTables: 79664 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 33027128 kB Committed_AS: 44418280 kB VmallocTotal: 34359738367 kB VmallocUsed: 426656 kB VmallocChunk: 34325375716 kB HardwareCorrupted: 0 kB AnonHugePages: 7665664 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 6144 kB DirectMap2M: 2058240 kB DirectMap1G: 65011712 kB

  Read the article

• Using virtual IP with stunnel and haproxy

  - by beardtwizzle

  Hi there, We have a load-balancer setup, in which an HTTPS Request flows through the following steps:- Client -> DNS -> stunnel on Load-Balancer -> HAProxy on LB -> Web-Server This setup works perfectly when stunnel is listening to the local IP of the Load-Balancer. However in our setup we have 2 load-balancers and we want to be able to listen to a virtual IP, which only ever exists on one LB at a time (keepalived flips the IP to the second LB if the first one falls over). HAProxy has no problem in doing this (and I can ping the assigned virtual IP on the load-balancer I'm testing), but it seems stunnel hates the concept. Has anyone achieved this before (below is my stunnel config - as you can see I'm actually listening for ALL traffic on 443):- cert= /etc/ssl/certs/mycert.crt key = /etc/ssl/certs/mykey.key ;setuid = nobody ;setgid = nogroup pid = /etc/stunnel/stunnel.pid debug = 3 output = /etc/stunnel/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 [https] accept=443 connect=127.0.0.1:8443 TIMEOUTclose=0 xforwardedfor=yes Sorry for the long-winded question!

  Read the article

• /scripts/easyapache broke PHP and now outputs binary

  - by James Lawrie

  I ran /scripts/easyapache on one of my cpanel servers last night and since then PHP just gives 501 errors, which no logs I can find. I tried running it again and it's running as normal but all output has been replaced with strange characters, eg: ????+?+± °?? ?-?.?... =?? ????+?+± °?? ¦+?+?.?... =?? ????+?+± °?? ?=?/¦+?+?.?... +? ????+?+± °?? ?=?/??++.?... =?? ????+?+± °?? ??++.?... =?? ????+?+± °?? ???+?+.?... +? ????+?+± °?? ?=?/????¦???.?... =?? ????+?+± °?? +??±?+.?... =?? ????+?+± °?? +??¦+?.?... =?? Has anyone come across this before? Is it fixable?

  Read the article

• bind9 "error sending response: host unreachable"

  - by wolfgangsz

  of course), I have a number of DNS servers, all running bind9 (9.5.1, to be specific) under fedora. 4 of them are slaves, fed by a common master for our public DNS. These are all located on the public gateways of our various offices. One of them has tons of messages in its log files similar to these: Jul 21 17:26:18 gateway named[3487]: client 10.171.3.8#52500: view internal: error sending response: host unreachable I wonder where that comes from. The firewall is open on port 53 between the two machines (10.171.3.8 is an internal DNS server located on a Windows Domain Controller). The internal domains do NOT list the gateway as a name server (so there should not be any attempts of replicating the domains), and the gateway does not handle any internal DNS. The clients in these messages vary between the two domain controllers on the internal network and a third internal name server (running bind9 on debian in a different segment of the network). Any pointers are highly welcome. In response to the first reply: The issue with this really is that tcpdump doesn't show any problems. Here is an extract from "tcpdump -i any port 53" 09:13:38.283308 IP valine.aminocom.com.61815 ns-pri.ripe.net.domain: 14075 PTR? 166.225.58.95.in-addr.arpa. (44) 09:13:42.007410 IP gateway-eng.aminocom.com.37047 alanine.aminocom.com.domain: 35410+ PTR? 12.3.172.10.in-addr.arpa. (42) At the same time, the DNS log shows: Jul 22 09:13:38 gateway named[3487]: client 10.171.3.6#61300: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.172.3.12#56230: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.171.3.8#55221: view internal: error sending response: host unreachable Jul 22 09:13:49 gateway named[3487]: client 10.171.3.8#51342: view internal: error sending response: host unreachable So clearly at 09:13:40 there were two unsuccessful attempts to connect to internal machines (10.172.3.12 and 10.171.3.8, both are DNS servers), but nothing in the tcpdump output.

  Read the article

• Thunderbird doesn't show folders on a new Dovecot install

  - by Zoran Zaric

  Hey, I set up a new mailserver with postfix and Dovecot some days ago, everything is working except for Thunderbird not showing any folders. Evolution shows me all folders. I migrated from a Courier install using imapsync. In the filesystem the folders don't have a INBOX in their name, so the tho folders ar called .Folder 1 not .INBOX.Folder 1. This is the output of dovecot -n: # 1.0.10: /etc/dovecot/dovecot.conf Warning: mail_extra_groups setting was often used insecurely so it is now deprecated, use mail_access_groups or mail_privileged_group instead base_dir: /var/run/dovecot/ log_timestamp: “%Y-%m-%d %H:%M:%S ” protocols: imap pop3 listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 1001 last_valid_uid: 1001 mail_extra_groups: vmail mail_access_groups: vmail mail_location: maildir:/var/vmail/%d/%u maildir_copy_with_hardlinks: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail Thanks!

  Read the article

• Virtualbox HTTP load testing, host CPU overload issues

  - by aschuler

  I'm doing HTTP load testing benchmarks (using Apache Benchmark and Siege) on a small Java EE 1.7.0 / Tomcat 7.0.26 application running on a Debian Squeeze 6.0.4 x64 virtualized with Virtualbox 4.1.8. The computer host is Ubuntu 11.10 x64. I've modified those parameters in the Tomcat server.xml : <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="200000" redirectPort="8443" acceptCount="2000" maxThreads="150" minSpareThreads="50" /> The application executed on the server takes around 300ms. This app is running well until a certain amount of concurrent connections like those one : ab -n 500 -c 150 http://xx.xx.xx.xx:8080/myapp/ ab -n 1000 -c 50 http://xx.xx.xx.xx:8080/myapp/ siege -b -c 100 -r 20 http://xx.xx.xx.xx:8080/myapp/ A lot of socket connection timed out happens and this completly overload the host processor (but the CPU load inside the VM is normal). Doing an htop on the host, i can see that the Virtualbox processus is running under 300% CPU and never come down even after the load test is finished. (I've allocated 4 processors to the VM, if I allocate only one processor, CPU load goes under 100%). Restarting Tomcat don't do anything, i'm forced to restart the whole VM. I've tryed to launch those ab/siege commands locally on the VM and everything goes well. I first thought it was related to a linux network limit as explained here: Running some benchmarks using ab, and tomcat starts to really slow down So I've modified those TCP parameters : echo 15 > /proc/sys/net/ipv4/tcp_fin_timeout echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse It seems to be better, but it continues to overload the host CPU and output socket connections time out at a certain amount of concurrent connections. I'm wondering if this is not related to how Virtualbox handles external concurrent connections.

  Read the article

• Embed album art in OGG through command line in linux

  - by teratomata

  I want to convert my music from flac to ogg, and currently oggenc does that perfectly except for album art. Metaflac can output album art, however there seems to be no command line tool to embed album art into ogg. MP3Tag and EasyTag are able to do it, and there is a specification for it here which calls for the image to be base64 encoded. However so far I have been unsuccessful in being able to take an image file, converting it to base64 and embedding it into an ogg file. If I take a base64 encoded image from an ogg file that already has the image embedded, I can easily embed it into another image using vorbiscomment: vorbiscomment -l withimage.ogg > textfile vorbiscomment -c textfile noimage.ogg My problem is taking something like a jpeg and converting it to base64. Currently I have: base64 --wrap=0 ./image.jpg Which gives me the image file converted to base64, using vorbiscomment and following the tagging rules, I can embed that into an ogg file like so: echo "METADATA_BLOCK_PICTURE=$(base64 --wrap=0 ./image.jpg)" > ./folder.txt vorbiscomment -c textfile noimage.ogg However this gives me an ogg whose image does not work properly. I noticed when comparing the base64 strings that all properly embedding pictures have a header line but all the base64 strings I generate are lacking this header. Further analysis of the header: od -c header.txt 0000000 \0 \0 \0 003 \0 \0 \0 \n i m a g e / j p 0000020 e g \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000040 \0 \0 \0 \0 \0 \0 \0 \0 035 332 0000052 Which follows the spec given above. Notice 003 corresponds to front cover and image/jpeg is the mime type. So finally, my question is, how can I base64 encode a file and generate this header along with it for embedding into an ogg file?

  Read the article

• Linux can't find file that exists

  - by Joe

  I'm trying to get Google's Dart language up and running, but it errors when running dart2js. I'm running Arch linux and I installed dart-sdk from AUR. Some relevant terminal output lies below. % dart2js main.dart /usr/local/bin/dart2js: line 7: /usr/local/bin/dart: No such file or directory % cat /usr/local/bin/dart2js #!/bin/sh # Copyright (c) 2012, the Dart project authors. Please see the AUTHORS file # for details. All rights reserved. Use of this source code is governed by a # BSD-style license that can be found in the LICENSE file. BIN_DIR=`dirname $0` exec $BIN_DIR/dart --allow_string_plus=false $BIN_DIR/../lib/dart2js/lib/compiler/implementation/dart2js.dart "$@" % file /usr/local/bin/dart /usr/local/bin/dart: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, BuildID[sha1]=0x27fe166ca015c1adfeaf3a6f9c018e7d7af46d9f, stripped % ls -alh /usr/local/bin total 4.9M drwxr-xr-x 2 root root 4.0K Jun 10 22:51 . drwxr-xr-x 12 root root 4.0K Jun 10 22:51 .. -rwxr-xr-x 1 root root 422K May 10 22:41 cargo -rwxr-xr-x 1 root root 2.7M Jun 10 22:50 dart -rwxr-xr-x 1 root root 360 Jun 6 16:20 dart2js -rwxr-xr-x 1 root root 176 Jun 6 16:20 pub -rwxr-xr-x 1 root root 166K May 10 22:41 rustc -rwxr-xr-x 1 root root 1.6M May 10 22:41 rustdoc % uname -rm 3.3.7-1-ARCH x86_64 Could it be because I'm running a 64bit OS and the dart binary is 32bit?

  Read the article

< Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >