Search Results

Search found 19701 results on 789 pages for 'disk images'.

Page 536/789 | < Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >

• Safari 7 SSL error if using IP-adress

  - by K. Biermann

  I have created my own CA for internal usage and set the root certificate to trustworthy on my machines. With this CA I signed the SSL-certificates for my internal servers. I only address them with their IP and so I used the servers' IP as certificate name. If i connect to the Servers with Chrome or mobile Safari it works without problems, but if I use Safari 7 under Mavericks (on the same machine with the same keychain) i get the following error: "The certificate is not valid (host name mismatch)". I double checked that I entered the correct IP ("https://192.168.2.130"), but I always get the same error. Do I need to enter a different name for the certificate or is it just that Safari doesn't support SSL certificates for IPs? Here is a screenshot of the error message (I can only post images with at least 10 rep): Safari's error message Thanks in advantage and please excuse my bad English :D

  Read the article

• Problems with the backup

  - by marcodv

  I did a script which run around 4 o'clock in the morning, for backup all the mysql databases and the config file for 250 linux vm. The problem is that it tooks ages for complete and more than 50% of these vm, need more than 8 hours for complete. More or less all the vm had the same configuration,I mean Same amount of ram same amount of disk space same number of cpu Debian 6.0.5 I am saving these backup on amazon s3, because is the cheapest solutions that I've found. Now my questions is: Has anyone some solutions or suggestions about that? On one blog I've read that probably the ionice and nice combination could be good work around about that. any thought?

  Read the article

• Clone drive in Windows

  - by ERJ

  I have two 2 TB external USB hard drives, call them HD1 and HD2. HD1 is USB 2, HD2 is USB 3. Each drive contains exactly one NTFS partition. I want to clone HD1 to HD2, because it's newer and much, much faster. What's the best way to do this? I don't want to do a copy-and-paste, I want to clone the whole partition. The new drive is actually a few bytes larger, so this should be possible? I don't have a second drive that can hold the image, so it would have to clone directly to the other disk (not to a file). How can I accomplish this on Windows 7? I know about Clonezilla but I would prefer not to have to boot from a CD or anything, as I don't have the capability to do that right now. I want to know if there's a way to do this while running Windows.

  Read the article

• Problem connecting with RDP between Mac and Win2k3 server

  - by salle55

  I have an iMac running Mac OS X 10.5.8 and the RDP Connection Client 2.0.1. http://salle.dyndns.org/misc/rdp%5Fproblem1.png When I try to connect to a Windows 2003 Server on the same network I get a dialog saying "Remote Desktop Connection cannot verify the identity of the computer that you want to connect to". Picture: salle.dyndns.org/misc/rdp_problem2.png And when I press the Connect-button in the previous dialog I get the same message in another dialog: Picture: salle.dyndns.org/misc/rdp_problem3.png I can connect to the Win2k3 server from a Vista machine, and it used to work from the Mac as well. I stopped working from the Mac after I did some configuration on the win2k3 server, removed and added the the connection in the Terminal Services Configuration: Picture: salle.dyndns.org/misc/rdp_problem4.png What do I need to do to be able to connect from the Mac again? (I have not enough reputation to post multiple links or images)

  Read the article

• Can't burn 8.1G iso onto 8.4GB DVD - "Media does not have enough free space"

  - by Max Williams

  I'm trying to burn a dvd on a mac with an external (firewire-connected) dvd drive. I'm checking the size of the iso thus: DVD-4:dvd_files macbook$ ls -l /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8700884992 Aug 22 10:57 /tmp/hybrid.iso DVD-4:dvd_files macbook$ ls -lh /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8.1G Aug 22 10:57 /tmp/hybrid.iso The "human-readable" size is 8.1 Gig but when i try to burn, onto an 8.4G dual-layer dvd, it says "Media does not have enough free space" The definition of a "Gigabyte" according to Wikipedia is 1 billion bytes, so the iso size should actually be 8.7 Gig according to this definition, in which case the disk definitely isn't big enough, and it's just that the -h option to ls is misleading. Is the discrepancy just due to the ls command using a different definition of "G" (eg 1024 Meg aka 1.07 Gig? This comes out as 8.103 which fits what ls is displaying)

  Read the article

• How do I scale EC2 and push out code / data to my instances?

  - by chris

  Unfortunately I only have a limited knowledge of server architecture, I come from a development background. I am looking to ensure my new app can scale properly using EC2. I currently have a T1.micro for development running Windows with SQL server 2008. The system allows students to come to our site to search for a mentor, update their profile with pictures and employment history etc. Roughly the same sort of work as a LinkedIn profile. I need this to be able to scale very quickly without wasted resources. I understand the following is important. Separation of data, application etc. I will achieve this I think by hosting images using S3, Database instance via RDS and upgrade the EC2 instance. My main question is: How do I push data / code out to multiple ec2 / RDS instances seamlessly?

  Read the article

• Web & SQL Hosting 32 vs. 16 GB of ram

  - by TravisK

  I'm in the market for a new dedicated host for my website. My question is I can pay more to upgrade to 32GB of RAM, but it seems overkill for my website right now, in fact, 16GB seems a little overkill. However, I run a lot of pretty intense full text searches for my site. I'm wondering if SQL Server would benefit, or could it be configured to use the 32 GB of RAM if I purchase the additional to help speed things up? I am assuming that most of my latency is caused by disk I/O and that for the extra money spent on RAM, I might not see any improvement in overall speed?

  Read the article

• Why does my drive show as 180GB used, but copies only 40GB?

  - by Manuel

  My computer crashed, so I removed the drive (with Windows XP Professional 32-Bit) and put this drive in another computer running Windows 7 64-bit. Booting with Win7, when going to My Computer it is showing the XP drive as more than 180GB used. So as a quick backup, I'm trying to copy all the disk's content to a folder, but when I start copying, it's showing only 40 GB as the total size of the files to copy. I enabled showing system and hidden files in View options. What could be the problem?

  Read the article

• Maximum burn speed keeps decreasing from Nero?

  - by Bob King

  I have a 16x DL DVD burner in my work machine (XP SP3). I'm using 8x TDK DVD+R media. The first dozen or so disks burned fine using Nero, but after that I started to coaster every disk. I asked Nero to calculate the maximum speed, and it calculated it at 4x. This worked for a few disks, then the same issues. I'm currently burning at 1.2x. I've since tried other brands and full 16x compatible disks, I can't get my burn speed to be recognized as any faster than what it's currently at. I've tried uninstalling Nero. I've tried burning directly in Windows, and also tested an MP3 CD in iTunes, and no luck. Any suggestions, short of reinstalling Windows, would be great!

  Read the article

• How to "eject" non-existing USB drive from Windows 7 host?

  - by gencha

  I use a USB key which is encrypted with BitLocker to store various data. I keep that key with me all the time. What happens all the time is that I send my home computer to hibernate without ejecting the USB key first. Then I unplug the key and take it with me to work. When I get home, I resume my Windows session and even though the key is not plugged in, the drive still appears as mounted on the system. I can also unmount the non-existing device with mountvol, but that only removes the drive letter. Windows will still think the device is plugged in. When I plug the key in, nothing happens. The device's class ID is listed in mountvol output, but the device is not listed in the Disk Management panel.

  Read the article

• Chrome browser rendering unpredictable mobile layout

  - by steve

  I am having a very hard time debugging this issue, I may as well find out if others have seen anything similar. I am finding that Webkit browsers are rendering extra space in a stacked menu I'm using for the mobile layout on a site I'm developing. The best way to describe this is with the following images: You can see that the is selected and shown with the padding. There is no margin, and yet there is some space between the top of the padding and the bottom border of the sibling. Here is how it is supposed to look in Firefox: I am interested to see if the community knows what in the world is going on! As I move through the inspector, I am not able to highlight the offending area, making this very hard to diagnose, as I've said.

  Read the article

• Is it possible to run a "Windows Server 2008 R2 SP1 Hyper-V Virtual Machine" on Windows 7x64 Pro machine?

  - by tbone

  Specifically, I want to run this: http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 This download contains a three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. System requirements Supported operating systems: Windows Server 2008 R2 Additionally you will need: •Windows Server 2008 R2 (SP1 recommended) with the Hyper-V role enabled. •Drive Formatting: NTFS •Processor: Intel VT or AMD-V capable •RAM: 8 GB or more recommended •Hard disk space required for install: 100 GB ------------------------- So, the above text seems to indicate that you need a physical Windows 2008 Server (r2) server running, but from the googling I've done on the subject I've yet to come across a discussion that definitively answers the question. Many posts I've read seem to indicate it might be possible to run it on Windows 7 using one of the following: VirtualBox, Windows Virtual PC, VMWare but I'm not entirely sure.

  Read the article

• suggest AMD machine for software developement [closed]

  - by superb1

  I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

  Read the article

• Windows XP computer reboots at start

  - by Jonas

  I have trouble with a Windows XP computer. After Windows is started and I can see the desktop background (sometimes I can use the system a few seconds), then the system is rebooted before I can do anything. I have used a Windows XP CD and runned chkdsk /r from the repair console. But it didn't help. I have also tried booting in "safe mode" but it didn't help. The C:\Windows\Minidump directory is empty. What can I do to solve this? UPDATE: I have now placed the harddrive in another computer and I have access to all data. Except from copying all data, is there anything I can make with the system so I can boot from the harddrive again? Is it "safe" to install windows on the same disk and directory - so I can access the data but not run the applications?

  Read the article

• Is there a piece of software which lets you turn "anything" into a dynamic reorderable list?

  - by Robin Green

  I could write this myself, but I want to know if it already exists. Basically, it must fulfill these criteria: To reorder items, the user must never have to manually renumber them. That would be annoying, and it doesn't scale. Can read from a range of data sources (e.g. a database, a directory on the file system, a text file, another list) When the original data source changes, the list must automatically change with it (possibly with confirmation, e.g. if a list item would be deleted) Ability to persist the list ordering in some fashion Graphical display of list items (so that they can include e.g. images) Optional extras: Ability to modify data and write back to the data source (other than the ordering information)

  Read the article

• What are the current options to encrypted a partition on mac os x ?

  - by symbion

  I recently got my laptop stolen with some sensitive informations on it (personal source code, bank details in a secure file, passwords, etc) and I learnt the lesson: encrypt your sensitive data. Now, I am wondering what are the options to encrypt a partition (not an encrypt disk image) ? Aim: The aim is to prevent anyone (except me) to access those data. Requirement 0: The software must be able to encrypt non system partition. Requirement 1: Plausible deniability is required but preventing cold boot attack is however not an absolute requirement (I am not famous enough or have sensitive enough info to have this kind of requirement). Requirement 2 : Software taking advantage of AES hardware encryption are very welcome as I intent to get a Macbook Pro with i7 CPU (with AES-NI enabled instructions). I will have avirtual machine running in the encrypted partition. Requirement 3 : Free or reasonably cheap. Requirement 4 : Software must run on Mac OS X Snow Leopard or Lion. So far, TrueCrypt is the only option I have found. Regards,

  Read the article

• How can I mount an image from an external HDD to a partition within the host system?

  - by HardwareMuch

  I'm currently using Acronis True Image Home 2010 and I have created an image of my Windows 7 OS. I copied it to my external HDD and I repartitioned my other PC's HDD. The primary partition houses the Windows Xp system which also has Acronis installed. The new partition is logical. Whenever I try to go through the steps on "Clone Disk" the program would not let me select a destination drive if I choose the external HDD as the source. I also did not know that it you can only select disks instead of partitions as a source or destination. Any suggestions would be greatly appreciated. Thanks.

  Read the article

• How do I estimate the number of RSS subscribers?

  - by Robert Kosara

  I'm running a website, and would like to get a better idea how many subscribers I have. I can check the number of subscribers on Google Reader for my two feeds (RSS and Atom). I also have access to my server logs, so I sometimes collect all the IP addresses that access the feeds over a month or so and do a uniq. Is that an accurate way of doing this? Are there other feed aggregators that I need to take into account? Any pitfalls when just going by IP address? I've also thought about embedding an image in the feeds to get a better count. But do all feed readers load images automatically?

  Read the article

• 2 "P4" power connectors *AND* an 8 pin EPS connector -- all necessary?

  - by chris

  I recently bought an Arima SW350 motherboard. It supports 16 ddr simms as well as 2 opteron 2xx CPUs, so I imagine it may have pretty heavy power requirements... It has a 24 pin ATX power connector, 2 4 pin "P4" power connectors, and an 8 pin EPS power connector. My supermicro power supply has a 24 pin ATX connector and the EPS connector, and one P4 connector. Can I safely run this thing with only one P4 connector plugged in? Can I safely get a "hard disk to P4" adapter and use that to power the other P4 connector on the motherboard? Do I just need a new power supply? The board's documentation is pretty thin on the topic.

  Read the article

• web page does not display properly

  - by Akil

  Hi, I have problem with one my conputer, it does not display any website properly. The background clouds on some websites do not show up, the layout of some websites are not properly displayed. And it only happen to only one computer. OS: Windows XP IE: 7 (not working on either IE7 or IE 8) I have tried to add my website as trusted site still that site is not working properly. I also tried Internet Options Advanced ... Check Show images, smart image dithering, enable visual styles in button and controls on webwage. Is there anything else I could do to fix the problem? Any help is appreciated

  Read the article

• Booting from a different partition.

  - by Legolas

  I have a question. I run Windows7 on C:\ drive and it is the only operating system. I want to install Windows8 developer installation (iso image), and I have it saved in a new partition I created, which has only this.G:\ I want to boot from this partition G:\ so that I can install Windows 8, but in my boot options I get only Internal Hard Disk, CD ROM, and USB Drive. I don't have a USB drive. How can I boot from G:\ with that iso image ?

  Read the article

• What are 'damaged files' on external hard drive (HFS format for OS X)?

  - by dtlussier

  I have an external HD formatted to default HFS (Mac OS Extended - Journaled) and very once and a while I get a folder called DamagedFiles in the root of the volume. The folder contains a collection of links to files on the drive. In general the files seem fine as I am for example able to open the images or text files without a problem. Is this serious? What can I do to fix this problem? Any advice would be great as I couldn't find anything on here or via Google that addressed this problem in particular. Many thanks.

  Read the article

• Replicate a big, dense Windows volume over a WAN -- too big for DFS-R

  - by Jesse

  I've got a server with a LOT of small files -- many millions files, and over 1.5 TB of data. I need a decent backup strategy. Any filesystem-based backup takes too long -- just enumerating which files need to be copied takes a day. Acronis can do a disk image in 24 hours, but fails when it tries to do a differential backup the next day. DFS-R won't replicate a volume with this many files. I'm starting to look at Double Take, which seems to be able to do continuous replication. Are there other solutions that can do continuous replication at a block or sector level -- not file-by-file over a WAN?

  Read the article

• Recover partition table after DD command

  - by Shreedhar

  I executed the following command from a Ubuntu live cd terminal (dont ask why). dd if=/dev/zero of=/dev/sdb2 bs=512 count=1 Where sdb2 is a NTFS partition (third partition) on a disk. Suffice to say it is now messed up. When I boot into windows 7, it does show me E drive but when I click on it it asks me to format it. I am not ever sure what I did, did I mess up partition table or only the MFT? Is there any way to get the data back PLEASE HELP! this is very important :(

  Read the article

• VMWare Lab Manager: What's the best way to build Library Configurations?

  - by mcohen75

  We're using Lab Manager within our QA group. We use it to quickly deliver environments we need for testing. We have 25 Templates, 14 Library Configurations and counting. To build up our templates we: Create a base template that is a bare bones version of Server 2008 + basic configuration (Windows Update, Firewall exceptions) Create a linked clone for each Server template we need (SQL Server 08, 05, etc) Repeat for other OS's, like Windows 7 and Windows XP Then we create configurations: Create a workspace configuration with multiple images in it (Say Server 08 w/SQL Server and Windows 7) Deploy the configuration and make some minor configuration changes Undeploy and Capture to Library How do we keep this manageable? When I need to update a configuration, should I: Rebuild it from templates Clone it to a workspace, make changes, recapture it to the library keep the configuration in my workspace (don't delete it after capturing it to library), deploy it to make changes and then re-capture to library

  Read the article

< Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >